summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-01-29 11:11:56 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2018-01-29 11:11:56 -0800
commit0fc7e74663447682c904fe375bb680b004ddaa14 (patch)
tree95f89c4a207995e57354c4f44bf7d83b5536370c /Documentation
parentaa5e75bc7a7c4ecbdee7bc85d1a306041b926e24 (diff)
parent571cb17b23eccc22f18c4fc0a0fc34cf0abca7ef (diff)
Merge tag 'mtd/for-4.16' of git://git.infradead.org/linux-mtd
Pull MTD updates from Boris Brezillon: "MTD core changes: - Rework core functions to avoid duplicating generic checks in NAND/OneNAND sub-layers - Update the MAINTAINERS entry to reflect the fact that MTD maintainers now use a single git tree MTD driver changes: - CFI: use macros instead of inline functions to limit stack usage and make KASAN happy NAND core changes: - Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks - Introduce the ->exec_op() infrastructure - Rework NAND buffers handling - Fix ECC requirements for K9F4G08U0D - Fix nand_do_read_oob() to return the number of bitflips - Mark K9F1G08U0E as not supporting subpage writes NAND driver changes: - MTK: Rework the driver to support new IP versions - OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and fix DT support - Marvell: Add a new driver to replace the pxa3xx one SPI NOR core changes: - Add support to new ISSI and Cypress/Spansion memory parts. - Fix support of Micron memories by checking error bits in the FSR. - Fix update of block-protection bits by reading back the SR. - Restore the internal state of the SPI flash memory when removing the device. SPI NOR driver changes: - Maintenance for Freescale, Intel and Metiatek drivers. - Add support of the direct access mode for the Cadence QSPI controller" * tag 'mtd/for-4.16' of git://git.infradead.org/linux-mtd: (93 commits) mtd: nand: sunxi: Fix ECC strength choice mtd: nand: gpmi: Fix subpage reads mtd: nand: Fix build issues due to an anonymous union mtd: nand: marvell: Fix missing memory allocation modifier mtd: nand: marvell: remove redundant variable 'oob_len' mtd: nand: marvell: fix spelling mistake: "suceed"-> "succeed" mtd: onenand: omap2: Remove redundant dev_err call in omap2_onenand_probe() mtd: Remove duplicate checks on mtd_oob_ops parameter mtd: Fallback to ->_read/write_oob() when ->_read/write() is missing mtd: mtdpart: Make ECC stat handling consistent mtd: onenand: omap2: print resource using %pR format string mtd: mtk-nor: modify functions' name more generally mtd: onenand: samsung: remove incorrect __iomem annotation MAINTAINERS: Add entry for Marvell NAND controller driver ARM: OMAP2+: Remove gpmc-onenand mtd: onenand: omap2: Configure driver from DT mtd: onenand: omap2: Decouple DMA enabling from INT pin availability mtd: onenand: omap2: Do not make delay for GPIO OMAP3 specific mtd: onenand: omap2: Convert to use dmaengine for memcpy mtd: onenand: omap2: Unify OMAP2 and OMAP3 DMA implementation ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/mtd/fsl-quadspi.txt2
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmc-onenand.txt6
-rw-r--r--Documentation/devicetree/bindings/mtd/marvell-nand.txt123
-rw-r--r--Documentation/devicetree/bindings/mtd/mtk-nand.txt11
-rw-r--r--Documentation/devicetree/bindings/mtd/nand.txt1
-rw-r--r--Documentation/mtd/spi-nor.txt3
6 files changed, 140 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
index c34aa6f8a424..63d4d626fbd5 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
@@ -12,7 +12,7 @@ Required properties:
- reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
- interrupts : Should contain the interrupt for the device
- clocks : The clocks needed by the QuadSPI controller
- - clock-names : the name of the clocks
+ - clock-names : Should contain the name of the clocks: "qspi_en" and "qspi".
Optional properties:
- fsl,qspi-has-second-chip: The controller has two buses, bus A and bus B.
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
index b6e8bfd024f4..e9f01a963a0a 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
@@ -9,13 +9,14 @@ Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
Required properties:
+ - compatible: "ti,omap2-onenand"
- reg: The CS line the peripheral is connected to
- - gpmc,device-width Width of the ONENAND device connected to the GPMC
+ - gpmc,device-width: Width of the ONENAND device connected to the GPMC
in bytes. Must be 1 or 2.
Optional properties:
- - dma-channel: DMA Channel index
+ - int-gpios: GPIO specifier for the INT pin.
For inline partition table parsing (optional):
@@ -35,6 +36,7 @@ Example for an OMAP3430 board:
#size-cells = <1>;
onenand@0 {
+ compatible = "ti,omap2-onenand";
reg = <0 0 0>; /* CS0, offset 0 */
gpmc,device-width = <2>;
diff --git a/Documentation/devicetree/bindings/mtd/marvell-nand.txt b/Documentation/devicetree/bindings/mtd/marvell-nand.txt
new file mode 100644
index 000000000000..c08fb477b3c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/marvell-nand.txt
@@ -0,0 +1,123 @@
+Marvell NAND Flash Controller (NFC)
+
+Required properties:
+- compatible: can be one of the following:
+ * "marvell,armada-8k-nand-controller"
+ * "marvell,armada370-nand-controller"
+ * "marvell,pxa3xx-nand-controller"
+ * "marvell,armada-8k-nand" (deprecated)
+ * "marvell,armada370-nand" (deprecated)
+ * "marvell,pxa3xx-nand" (deprecated)
+ Compatibles marked deprecated support only the old bindings described
+ at the bottom.
+- reg: NAND flash controller memory area.
+- #address-cells: shall be set to 1. Encode the NAND CS.
+- #size-cells: shall be set to 0.
+- interrupts: shall define the NAND controller interrupt.
+- clocks: shall reference the NAND controller clock.
+- marvell,system-controller: Set to retrieve the syscon node that handles
+ NAND controller related registers (only required with the
+ "marvell,armada-8k-nand[-controller]" compatibles).
+
+Optional properties:
+- label: see partition.txt. New platforms shall omit this property.
+- dmas: shall reference DMA channel associated to the NAND controller.
+ This property is only used with "marvell,pxa3xx-nand[-controller]"
+ compatible strings.
+- dma-names: shall be "rxtx".
+ This property is only used with "marvell,pxa3xx-nand[-controller]"
+ compatible strings.
+
+Optional children nodes:
+Children nodes represent the available NAND chips.
+
+Required properties:
+- reg: shall contain the native Chip Select ids (0-3).
+- nand-rb: see nand.txt (0-1).
+
+Optional properties:
+- marvell,nand-keep-config: orders the driver not to take the timings
+ from the core and leaving them completely untouched. Bootloader
+ timings will then be used.
+- label: MTD name.
+- nand-on-flash-bbt: see nand.txt.
+- nand-ecc-mode: see nand.txt. Will use hardware ECC if not specified.
+- nand-ecc-algo: see nand.txt. This property is essentially useful when
+ not using hardware ECC. Howerver, it may be added when using hardware
+ ECC for clarification but will be ignored by the driver because ECC
+ mode is chosen depending on the page size and the strength required by
+ the NAND chip. This value may be overwritten with nand-ecc-strength
+ property.
+- nand-ecc-strength: see nand.txt.
+- nand-ecc-step-size: see nand.txt. Marvell's NAND flash controller does
+ use fixed strength (1-bit for Hamming, 16-bit for BCH), so the actual
+ step size will shrink or grow in order to fit the required strength.
+ Step sizes are not completely random for all and follow certain
+ patterns described in AN-379, "Marvell SoC NFC ECC".
+
+See Documentation/devicetree/bindings/mtd/nand.txt for more details on
+generic bindings.
+
+
+Example:
+nand_controller: nand-controller@d0000 {
+ compatible = "marvell,armada370-nand-controller";
+ reg = <0xd0000 0x54>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&coredivclk 0>;
+
+ nand@0 {
+ reg = <0>;
+ label = "main-storage";
+ nand-rb = <0>;
+ nand-ecc-mode = "hw";
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Rootfs";
+ reg = <0x00000000 0x40000000>;
+ };
+ };
+ };
+};
+
+
+Note on legacy bindings: One can find, in not-updated device trees,
+bindings slightly different than described above with other properties
+described below as well as the partitions node at the root of a so
+called "nand" node (without clear controller/chip separation).
+
+Legacy properties:
+- marvell,nand-enable-arbiter: To enable the arbiter, all boards blindly
+ used it, this bit was set by the bootloader for many boards and even if
+ it is marked reserved in several datasheets, it might be needed to set
+ it (otherwise it is harmless) so whether or not this property is set,
+ the bit is selected by the driver.
+- num-cs: Number of chip-select lines to use, all boards blindly set 1
+ to this and for a reason, other values would have failed. The value of
+ this property is ignored.
+
+Example:
+
+ nand0: nand@43100000 {
+ compatible = "marvell,pxa3xx-nand";
+ reg = <0x43100000 90>;
+ interrupts = <45>;
+ dmas = <&pdma 97 0>;
+ dma-names = "rxtx";
+ #address-cells = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ num-cs = <1>;
+ /* Partitions (optional) */
+ };
diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
index 0431841de781..1c88526dedfc 100644
--- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
@@ -12,8 +12,10 @@ tree nodes.
The first part of NFC is NAND Controller Interface (NFI) HW.
Required NFI properties:
-- compatible: Should be one of "mediatek,mt2701-nfc",
- "mediatek,mt2712-nfc".
+- compatible: Should be one of
+ "mediatek,mt2701-nfc",
+ "mediatek,mt2712-nfc",
+ "mediatek,mt7622-nfc".
- reg: Base physical address and size of NFI.
- interrupts: Interrupts of NFI.
- clocks: NFI required clocks.
@@ -142,7 +144,10 @@ Example:
==============
Required BCH properties:
-- compatible: Should be one of "mediatek,mt2701-ecc", "mediatek,mt2712-ecc".
+- compatible: Should be one of
+ "mediatek,mt2701-ecc",
+ "mediatek,mt2712-ecc",
+ "mediatek,mt7622-ecc".
- reg: Base physical address and size of ECC.
- interrupts: Interrupts of ECC.
- clocks: ECC required clocks.
diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt
index 133f3813719c..8bb11d809429 100644
--- a/Documentation/devicetree/bindings/mtd/nand.txt
+++ b/Documentation/devicetree/bindings/mtd/nand.txt
@@ -43,6 +43,7 @@ Optional NAND chip properties:
This is particularly useful when only the in-band area is
used by the upper layers, and you want to make your NAND
as reliable as possible.
+- nand-rb: shall contain the native Ready/Busy ids.
The ECC strength and ECC step size properties define the correction capability
of a controller. Together, they say a controller can correct "{strength} bit
diff --git a/Documentation/mtd/spi-nor.txt b/Documentation/mtd/spi-nor.txt
index 548d6306ebca..da1fbff5a24c 100644
--- a/Documentation/mtd/spi-nor.txt
+++ b/Documentation/mtd/spi-nor.txt
@@ -60,3 +60,6 @@ The main API is spi_nor_scan(). Before you call the hook, a driver should
initialize the necessary fields for spi_nor{}. Please see
drivers/mtd/spi-nor/spi-nor.c for detail. Please also refer to fsl-quadspi.c
when you want to write a new driver for a SPI NOR controller.
+Another API is spi_nor_restore(), this is used to restore the status of SPI
+flash chip such as addressing mode. Call it whenever detach the driver from
+device or reboot the system.