summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-01-27 11:15:34 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2020-01-27 11:15:34 -0800
commit1e1ab4ba4747afad3e44a77dded1bab4cb77049e (patch)
treeeebb31be37d25b5d875d70b2fe908df1b412471c /Documentation
parente83a0ed2a6a3f6e67630d1580f1ade97a54c524f (diff)
parent754a36a58c29718bf5e28b8789b17bffbb60e8a6 (diff)
Merge tag 'spi-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown: "Not much going on in the core for SPI this time but a reasonable amount of change in the drivers: - Removal of dmal_request_slave_channel() from Peter Ujfalusi. - More conversions of drivers to GPIO descriptors from Linus Walleij. - A big rework of the sh-msiof driver from Geert Uytterhoeven moving it over to the generic native chipselect support. - DMA support for the uniphier driver from Kunihiko Hayashi. - New driver support for HiSilcon v3xx SPI NOR controllers from John Garry" * tag 'spi-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (52 commits) dt-binding: spi: add NPCM PSPI reset binding spi: pxa2xx: Avoid touching SSCR0_SSE on MMP2 spi: spi-fsl-qspi: Ensure width is respected in spi-mem operations spi: npcm-pspi: modify reset support spi: npcm-pspi: improve spi transfer performance spi: spi-ti-qspi: fix warning spi: npcm-pspi: fix 16 bit send and receive support spi: pxa2xx: Add support for Intel Comet Lake PCH-V spi: fsl: simplify error path in of_fsl_spi_probe() spi: fsl-lpspi: fix only one cs-gpio working spi: spi-ti-qspi: optimize byte-transfers spi: spi-ti-qspi: support large flash devices spi: spi-qcom-qspi: Use device managed memory for clk_bulk_data MAINTAINERS: Add a maintainer for the HiSilicon v3xx SFC driver spi: Add HiSilicon v3xx SPI NOR flash controller driver dt-bindings: spi_atmel: add microchip,sam9x60-spi spi: bcm2835: Raise maximum number of slaves to 4 spi: sh-msiof: Do not redefine STR while compile testing spi: rspi: Add support for GPIO chip selects spi: rspi: Add support for multiple native chip selects ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt12
-rw-r--r--Documentation/devicetree/bindings/spi/spi-stm32.txt62
-rw-r--r--Documentation/devicetree/bindings/spi/spi_atmel.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/st,stm32-spi.yaml105
4 files changed, 108 insertions, 73 deletions
diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt
index 1fd9a4406a1d..b98203ca656d 100644
--- a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt
+++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt
@@ -12,6 +12,7 @@ Required properties:
- clock-names: Should be "clk_apb5".
- pinctrl-names : a pinctrl state named "default" must be defined.
- pinctrl-0 : phandle referencing pin configuration of the device.
+ - resets : phandle to the reset control for this device.
- cs-gpios: Specifies the gpio pins to be used for chipselects.
See: Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -19,16 +20,6 @@ Optional properties:
- clock-frequency : Input clock frequency to the PSPI block in Hz.
Default is 25000000 Hz.
-Aliases:
-- All the SPI controller nodes should be represented in the aliases node using
- the following format 'spi{n}' withe the correct numbered in "aliases" node.
-
-Example:
-
-aliases {
- spi0 = &spi0;
-};
-
spi0: spi@f0200000 {
compatible = "nuvoton,npcm750-pspi";
reg = <0xf0200000 0x1000>;
@@ -39,5 +30,6 @@ spi0: spi@f0200000 {
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk NPCM7XX_CLK_APB5>;
clock-names = "clk_apb5";
+ resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>
cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
};
diff --git a/Documentation/devicetree/bindings/spi/spi-stm32.txt b/Documentation/devicetree/bindings/spi/spi-stm32.txt
deleted file mode 100644
index d82755c63eaf..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-stm32.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-STMicroelectronics STM32 SPI Controller
-
-The STM32 SPI controller is used to communicate with external devices using
-the Serial Peripheral Interface. It supports full-duplex, half-duplex and
-simplex synchronous serial communication with external devices. It supports
-from 4 to 32-bit data size. Although it can be configured as master or slave,
-only master is supported by the driver.
-
-Required properties:
-- compatible: Should be one of:
- "st,stm32h7-spi"
- "st,stm32f4-spi"
-- reg: Offset and length of the device's register set.
-- interrupts: Must contain the interrupt id.
-- clocks: Must contain an entry for spiclk (which feeds the internal clock
- generator).
-- #address-cells: Number of cells required to define a chip select address.
-- #size-cells: Should be zero.
-
-Optional properties:
-- resets: Must contain the phandle to the reset controller.
-- A pinctrl state named "default" may be defined to set pins in mode of
- operation for SPI transfer.
-- dmas: DMA specifiers for tx and rx dma. DMA fifo mode must be used. See the
- STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt.
-- dma-names: DMA request names should include "tx" and "rx" if present.
-- cs-gpios: list of GPIO chip selects. See the SPI bus bindings,
- Documentation/devicetree/bindings/spi/spi-bus.txt
-
-
-Child nodes represent devices on the SPI bus
- See ../spi/spi-bus.txt
-
-Optional properties:
-- st,spi-midi-ns: Only for STM32H7, (Master Inter-Data Idleness) minimum time
- delay in nanoseconds inserted between two consecutive data
- frames.
-
-
-Example:
- spi2: spi@40003800 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32h7-spi";
- reg = <0x40003800 0x400>;
- interrupts = <36>;
- clocks = <&rcc SPI2_CK>;
- resets = <&rcc 1166>;
- dmas = <&dmamux1 0 39 0x400 0x01>,
- <&dmamux1 1 40 0x400 0x01>;
- dma-names = "rx", "tx";
- pinctrl-0 = <&spi2_pins_b>;
- pinctrl-names = "default";
- cs-gpios = <&gpioa 11 0>;
-
- aardvark@0 {
- compatible = "totalphase,aardvark";
- reg = <0>;
- spi-max-frequency = <4000000>;
- st,spi-midi-ns = <4000>;
- };
- };
diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
index f99c733d75c1..5bb4a8f1df7a 100644
--- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
+++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
@@ -1,7 +1,7 @@
Atmel SPI device
Required properties:
-- compatible : should be "atmel,at91rm9200-spi".
+- compatible : should be "atmel,at91rm9200-spi" or "microchip,sam9x60-spi".
- reg: Address and length of the register set for the device
- interrupts: Should contain spi interrupt
- cs-gpios: chipselects (optional for SPI controller version >= 2 with the
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
new file mode 100644
index 000000000000..f0d979664f07
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/st,stm32-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 SPI Controller bindings
+
+description: |
+ The STM32 SPI controller is used to communicate with external devices using
+ the Serial Peripheral Interface. It supports full-duplex, half-duplex and
+ simplex synchronous serial communication with external devices. It supports
+ from 4 to 32-bit data size.
+
+maintainers:
+ - Erwan Leray <erwan.leray@st.com>
+ - Fabrice Gasnier <fabrice.gasnier@st.com>
+
+allOf:
+ - $ref: "spi-controller.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32f4-spi
+
+ then:
+ properties:
+ st,spi-midi-ns: false
+
+properties:
+ compatible:
+ enum:
+ - st,stm32f4-spi
+ - st,stm32h7-spi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ description: |
+ DMA specifiers for tx and rx dma. DMA fifo mode must be used. See
+ the STM32 DMA bindings Documentation/devicetree/bindings/dma/stm32-dma.txt.
+ items:
+ - description: rx DMA channel
+ - description: tx DMA channel
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+patternProperties:
+ "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$":
+ type: object
+ # SPI slave nodes must be children of the SPI master node and can
+ # contain the following properties.
+ properties:
+ st,spi-midi-ns:
+ description: |
+ Only for STM32H7, (Master Inter-Data Idleness) minimum time
+ delay in nanoseconds inserted between two consecutive data frames.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ spi@4000b000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32h7-spi";
+ reg = <0x4000b000 0x400>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc SPI2_K>;
+ resets = <&rcc SPI2_R>;
+ dmas = <&dmamux1 0 39 0x400 0x05>,
+ <&dmamux1 1 40 0x400 0x05>;
+ dma-names = "rx", "tx";
+ cs-gpios = <&gpioa 11 0>;
+
+ aardvark@0 {
+ compatible = "totalphase,aardvark";
+ reg = <0>;
+ spi-max-frequency = <4000000>;
+ st,spi-midi-ns = <4000>;
+ };
+ };
+
+...