summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2016-11-27 20:26:59 -0500
committerDavid S. Miller <davem@davemloft.net>2016-11-27 20:26:59 -0500
commit33f8a0458b2ce4546b681c5fae04427e3077a543 (patch)
treedc7e9750666fa02b19e0dad4aa8b514403f5e4ae /Documentation
parent5a717f4f8f2830f297b5511022481bdc27b9d576 (diff)
parent159a55a64d44acbbd6f0d8f3c082e628d6d75670 (diff)
Merge tag 'wireless-drivers-next-for-davem-2016-11-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says: ==================== wireless-drivers-next patches for 4.10 Major changes: iwlwifi * finalize and enable dynamic queue allocation * use dev_coredumpmsg() to prevent locking the driver * small fix to pass the AID to the FW * use FW PS decisions with multi-queue ath9k * add device tree bindings * switch to use mac80211 intermediate software queues to reduce latency and fix bufferbloat wl18xx * allow scanning in AP mode ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt (renamed from Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt)8
-rw-r--r--Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt48
2 files changed, 53 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
index c421aba0a5bc..980b16df74c3 100644
--- a/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt
+++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
@@ -1,8 +1,8 @@
-Marvell 8897/8997 (sd8897/sd8997) SDIO devices
+Marvell 8897/8997 (sd8897/sd8997/pcie8997) SDIO/PCIE devices
------
-This node provides properties for controlling the marvell sdio wireless device.
-The node is expected to be specified as a child node to the SDIO controller that
+This node provides properties for controlling the Marvell SDIO/PCIE wireless device.
+The node is expected to be specified as a child node to the SDIO/PCIE controller that
connects the device to the system.
Required properties:
@@ -10,6 +10,8 @@ Required properties:
- compatible : should be one of the following:
* "marvell,sd8897"
* "marvell,sd8997"
+ * "pci11ab,2b42"
+ * "pci1b4b,2b42"
Optional properties:
diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt
new file mode 100644
index 000000000000..b7396c8c271c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt
@@ -0,0 +1,48 @@
+* Qualcomm Atheros ath9k wireless devices
+
+This node provides properties for configuring the ath9k wireless device. The
+node is expected to be specified as a child node of the PCI controller to
+which the wireless chip is connected.
+
+Required properties:
+- compatible: For PCI and PCIe devices this should be an identifier following
+ the format as defined in "PCI Bus Binding to Open Firmware"
+ Revision 2.1. One of the possible formats is "pciVVVV,DDDD"
+ where VVVV is the PCI vendor ID and DDDD is PCI device ID.
+ Typically QCA's PCI vendor ID 168c is used while the PCI device
+ ID depends on the chipset - see the following (possibly
+ incomplete) list:
+ - 0023 for AR5416
+ - 0024 for AR5418
+ - 0027 for AR9160
+ - 0029 for AR9220 and AR9223
+ - 002a for AR9280 and AR9283
+ - 002b for AR9285
+ - 002c for AR2427
+ - 002d for AR9227
+ - 002e for AR9287
+ - 0030 for AR9380, AR9381 and AR9382
+ - 0032 for AR9485
+ - 0033 for AR9580 and AR9590
+ - 0034 for AR9462
+ - 0036 for AR9565
+ - 0037 for AR9485
+- reg: Address and length of the register set for the device.
+
+Optional properties:
+- qca,no-eeprom: Indicates that there is no physical EEPROM connected to the
+ ath9k wireless chip (in this case the calibration /
+ EEPROM data will be loaded from userspace using the
+ kernel firmware loader).
+- mac-address: See ethernet.txt in the parent directory
+- local-mac-address: See ethernet.txt in the parent directory
+
+
+In this example, the node is defined as child node of the PCI controller:
+&pci0 {
+ wifi@168c,002d {
+ compatible = "pci168c,002d";
+ reg = <0x7000 0 0 0 0x1000>;
+ qca,no-eeprom;
+ };
+};