summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2023-11-05 08:41:14 -1000
committerLinus Torvalds <torvalds@linux-foundation.org>2023-11-05 08:41:14 -1000
commit3d05e493e461c4469a9b73e00e59ea16e1d8a416 (patch)
treea23450428a4153bebce9bc11a92d1ea8803dca82 /Documentation
parent2153fc3d68170bb67be8e389c2f6e0f4a9eb7cd3 (diff)
parent10e806d39d304f837ed2921f36499f17a774a220 (diff)
Merge tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: "I2C has largely driver updates for 6.7, i.e. feature additions (like adding transfers while in atomic mode), using new helpers (like devm_clk_get_enabled), new IDs, documentation fixes and additions... you name it. The core got a memleak fix and better support for nested muxes" * tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (53 commits) i2c: s3c2410: make i2c_s3c_irq_nextbyte() void i2c: qcom-geni: add ACPI device id for sc8180x Documentation: i2c: add fault code for not supporting 10 bit addresses i2c: sun6i-p2wi: Prevent potential division by zero i2c: mux: demux-pinctrl: Convert to use sysfs_emit_at() API i2c: i801: Use new helper acpi_use_parent_companion ACPI: Add helper acpi_use_parent_companion MAINTAINERS: add YAML file for i2c-demux-pinctrl i2c: core: fix lockdep warning for sparsely nested adapter chain i2c: axxia: eliminate kernel-doc warnings dt-bindings: i2c: i2c-demux-pinctrl: Convert to json-schema i2c: stm32f7: Use devm_clk_get_enabled() i2c: stm32f4: Use devm_clk_get_enabled() i2c: stm32f7: add description of atomic in struct stm32f7_i2c_dev i2c: fix memleak in i2c_new_client_device() i2c: exynos5: Calculate t_scl_l, t_scl_h according to i2c spec i2c: i801: Simplify class-based client device instantiation i2c: exynos5: add support for atomic transfers i2c: at91-core: Use devm_clk_get_enabled() eeprom: at24: add ST M24C64-D Additional Write lockable page support ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/eeprom/at24.yaml4
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt135
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml172
-rw-r--r--Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml2
-rw-r--r--Documentation/i2c/busses/i2c-i801.rst1
-rw-r--r--Documentation/i2c/fault-codes.rst4
6 files changed, 183 insertions, 135 deletions
diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index bfff71ff3d6a..b6864d0ee81e 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -69,10 +69,14 @@ properties:
- items:
pattern: c32$
- items:
+ pattern: c32d-wl$
+ - items:
pattern: cs32$
- items:
pattern: c64$
- items:
+ pattern: c64d-wl$
+ - items:
pattern: cs64$
- items:
pattern: c128$
diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
deleted file mode 100644
index 86b2e433a969..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-Pinctrl-based I2C Bus DeMux
-
-This binding describes an I2C bus demultiplexer that uses pin multiplexing to
-route the I2C signals, and represents the pin multiplexing configuration using
-the pinctrl device tree bindings. This may be used to select one I2C IP core at
-runtime which may have a better feature set for a given task than another I2C
-IP core on the SoC. The most simple example is to fall back to GPIO bitbanging
-if your current runtime configuration hits an errata of the internal IP core.
-
- +-------------------------------+
- | SoC |
- | | +-----+ +-----+
- | +------------+ | | dev | | dev |
- | |I2C IP Core1|--\ | +-----+ +-----+
- | +------------+ \-------+ | | |
- | |Pinctrl|--|------+--------+
- | +------------+ +-------+ |
- | |I2C IP Core2|--/ |
- | +------------+ |
- | |
- +-------------------------------+
-
-Required properties:
-- compatible: "i2c-demux-pinctrl"
-- i2c-parent: List of phandles of I2C masters available for selection. The first
- one will be used as default.
-- i2c-bus-name: The name of this bus. Also needed as pinctrl-name for the I2C
- parents.
-
-Furthermore, I2C mux properties and child nodes. See i2c-mux.yaml in this
-directory.
-
-Example:
-
-Here is a snipplet for a bus to be demuxed. It contains various i2c clients for
-HDMI, so the bus is named "i2c-hdmi":
-
- i2chdmi: i2c@8 {
-
- compatible = "i2c-demux-pinctrl";
- i2c-parent = <&gpioi2c>, <&iic2>, <&i2c2>;
- i2c-bus-name = "i2c-hdmi";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ak4643: sound-codec@12 {
- compatible = "asahi-kasei,ak4643";
-
- #sound-dai-cells = <0>;
- reg = <0x12>;
- };
-
- composite-in@20 {
- compatible = "adi,adv7180";
- reg = <0x20>;
- remote = <&vin1>;
-
- port {
- adv7180: endpoint {
- bus-width = <8>;
- remote-endpoint = <&vin1ep0>;
- };
- };
- };
-
- hdmi@39 {
- compatible = "adi,adv7511w";
- reg = <0x39>;
- interrupt-parent = <&gpio1>;
- interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-
- adi,input-depth = <8>;
- adi,input-colorspace = "rgb";
- adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7511_in: endpoint {
- remote-endpoint = <&du_out_lvds0>;
- };
- };
-
- port@1 {
- reg = <1>;
- adv7511_out: endpoint {
- remote-endpoint = <&hdmi_con>;
- };
- };
- };
- };
- };
-
-And for clarification, here are the snipplets for the i2c-parents:
-
- gpioi2c: i2c@9 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "i2c-gpio";
- gpios = <&gpio5 6 GPIO_ACTIVE_HIGH /* sda */
- &gpio5 5 GPIO_ACTIVE_HIGH /* scl */
- >;
- i2c-gpio,delay-us = <5>;
- };
-
-...
-
-&i2c2 {
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "i2c-hdmi";
-
- clock-frequency = <100000>;
-};
-
-...
-
-&iic2 {
- pinctrl-0 = <&iic2_pins>;
- pinctrl-names = "i2c-hdmi";
-
- clock-frequency = <100000>;
-};
-
-Please note:
-
-- pinctrl properties for the parent I2C controllers need a pinctrl state
- with the same name as i2c-bus-name, not "default"!
-
-- the i2c masters must have their status "disabled". This driver will
- enable them at runtime when needed.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml
new file mode 100644
index 000000000000..2c08f2a7cf1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-demux-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pinctrl-based I2C Bus Demultiplexer
+
+maintainers:
+ - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+description: |
+ This binding describes an I2C bus demultiplexer that uses pin multiplexing to
+ route the I2C signals, and represents the pin multiplexing configuration
+ using the pinctrl device tree bindings. This may be used to select one I2C
+ IP core at runtime which may have a better feature set for a given task than
+ another I2C IP core on the SoC. The most simple example is to fall back to
+ GPIO bitbanging if your current runtime configuration hits an errata of the
+ internal IP core.
+
+ +-------------------------------+
+ | SoC |
+ | | +-----+ +-----+
+ | +------------+ | | dev | | dev |
+ | |I2C IP Core1|--\ | +-----+ +-----+
+ | +------------+ \-------+ | | |
+ | |Pinctrl|--|------+--------+
+ | +------------+ +-------+ |
+ | |I2C IP Core2|--/ |
+ | +------------+ |
+ | |
+ +-------------------------------+
+
+allOf:
+ - $ref: i2c-mux.yaml
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ const: i2c-demux-pinctrl
+
+ i2c-parent:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ List of phandles of I2C masters available for selection. The first one
+ will be used as default.
+
+ i2c-bus-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ The name of this bus. Also needed as pinctrl-name for the I2C parents.
+
+required:
+ - compatible
+ - i2c-parent
+ - i2c-bus-name
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ gpioi2c2: i2c-9 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "i2c-gpio";
+ scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <5>;
+
+ // The I2C controller must have its status "disabled". The I2C bus
+ // demultiplexer will enable it at runtime when needed.
+ status = "disabled";
+ };
+
+ iic2: i2c@e6520000 {
+ reg = <0xe6520000 0x425>;
+ pinctrl-0 = <&iic2_pins>;
+ // The pinctrl property for the parent I2C controller needs a pinctrl
+ // state with the same name as i2c-bus-name in the I2C bus demultiplexer
+ // node, not "default"!
+ pinctrl-names = "i2c-hdmi";
+
+ clock-frequency = <100000>;
+
+ // The I2C controller must have its status "disabled". The I2C bus
+ // demultiplexer will enable it at runtime when needed.
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6530000 {
+ reg = <0 0xe6530000 0 0x40>;
+ pinctrl-0 = <&i2c2_pins>;
+ // The pinctrl property for the parent I2C controller needs a pinctrl
+ // state with the same name as i2c-bus-name in the I2C bus demultiplexer
+ // node, not "default"!
+ pinctrl-names = "i2c-hdmi";
+
+ clock-frequency = <100000>;
+
+ // The I2C controller must have its status "disabled". The I2C bus
+ // demultiplexer will enable it at runtime when needed.
+ status = "disabled";
+ };
+
+ // Example for a bus to be demuxed. It contains various I2C clients for
+ // HDMI, so the bus is named "i2c-hdmi":
+ i2chdmi: i2c-mux3 {
+ compatible = "i2c-demux-pinctrl";
+ i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
+ i2c-bus-name = "i2c-hdmi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ak4643: codec@12 {
+ compatible = "asahi-kasei,ak4643";
+ #sound-dai-cells = <0>;
+ reg = <0x12>;
+ };
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin1ep0>;
+ };
+ };
+ };
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&cec_clock>;
+ clock-names = "cec";
+
+ avdd-supply = <&fixedregulator1v8>;
+ dvdd-supply = <&fixedregulator1v8>;
+ pvdd-supply = <&fixedregulator1v8>;
+ dvdd-3v-supply = <&fixedregulator3v3>;
+ bgvdd-supply = <&fixedregulator1v8>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
index 042d4dc636ee..8386cfe21532 100644
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
@@ -25,6 +25,7 @@ properties:
- items:
- enum:
+ - qcom,sc7280-cci
- qcom,sdm845-cci
- qcom,sm6350-cci
- qcom,sm8250-cci
@@ -159,6 +160,7 @@ allOf:
compatible:
contains:
enum:
+ - qcom,sc7280-cci
- qcom,sm8250-cci
- qcom,sm8450-cci
then:
diff --git a/Documentation/i2c/busses/i2c-i801.rst b/Documentation/i2c/busses/i2c-i801.rst
index e76e68ccf718..10eced6c2e46 100644
--- a/Documentation/i2c/busses/i2c-i801.rst
+++ b/Documentation/i2c/busses/i2c-i801.rst
@@ -47,6 +47,7 @@ Supported adapters:
* Intel Alder Lake (PCH)
* Intel Raptor Lake (PCH)
* Intel Meteor Lake (SOC and PCH)
+ * Intel Birch Stream (SOC)
Datasheets: Publicly available at the Intel website
diff --git a/Documentation/i2c/fault-codes.rst b/Documentation/i2c/fault-codes.rst
index 80b14e718b52..b0864d1268bd 100644
--- a/Documentation/i2c/fault-codes.rst
+++ b/Documentation/i2c/fault-codes.rst
@@ -39,6 +39,10 @@ Also, codes returned by adapter probe methods follow rules which are
specific to their host bus (such as PCI, or the platform bus).
+EAFNOSUPPORT
+ Returned by I2C adapters not supporting 10 bit addresses when
+ they are requested to use such an address.
+
EAGAIN
Returned by I2C adapters when they lose arbitration in master
transmit mode: some other master was transmitting different