diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-10-31 05:10:11 -1000 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-10-31 05:10:11 -1000 |
| commit | 89ed67ef126c4160349c1b96fdb775ea6170ac90 (patch) | |
| tree | 98caaf8bba44b21f9345a0af1dd2bd9987764e27 /Documentation | |
| parent | 5a6a09e97199d6600d31383055f9d43fbbcbe86f (diff) | |
| parent | f1c73396133cb3d913e2075298005644ee8dfade (diff) | |
Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support usec resolution of TCP timestamps, enabled selectively by a
route attribute.
- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality
- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.
- Add more retransmission timeout (RTO) related statistics to
TCP_INFO.
- Support sending fragmented skbs over vsock sockets.
- Make sure we send SIGPIPE for vsock sockets if socket was
shutdown().
- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.
- Add sysctl to control activation of TCP ping-pong mode.
- Add sysctl to make connection timeout in MPTCP configurable.
- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.
- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.
- Support selective FDB flushing in the VXLAN tunnel driver.
- Allow limiting learned FDB entries in bridges, prevent OOM attacks.
- Allow controlling via configfs netconsole targets which were
created via the kernel cmdline at boot, rather than via configfs at
runtime.
- Support multiple PTP timestamp event queue readers with different
filters.
- MCTP over I3C.
BPF:
- Add new veth-like netdevice where BPF program defines the logic of
the xmit routine. It can operate in L3 and L2 mode.
- Support exceptions - allow asserting conditions which should never
be true but are hard for the verifier to infer. With some extra
flexibility around handling of the exit / failure:
https://lwn.net/Articles/938435/
- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on the
value for the current CPU.
This allows to deprecate local one-off implementations of per-CPU
storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.
- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.
- Add open-coded task, css_task and css iterator support. One of the
use cases is customizable OOM victim selection via BPF.
- Allow source address selection with bpf_*_fib_lookup().
- Add ability to pin BPF timer to the current CPU.
- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.
- Add missed stats for kprobes to retrieve the number of missed
kprobe executions and subsequent executions of BPF programs.
- Inherit system settings for CPU security mitigations.
- Add BPF v4 CPU instruction support for arm32 and s390x.
Changes to common code:
- overflow: add DEFINE_FLEX() for on-stack definition of structs with
flexible array members.
- Process doc update with more guidance for reviewers.
Driver API:
- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.
- Create a common DPLL configuration API. Allow configuring and
querying state of PLL circuits used for clock syntonization, in
network time distribution.
- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.
- Rework PHY state machine to avoid races with calls to phy_stop().
- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC
addresses.
- Allow antenna control on injected WiFi frames.
- Reduce the number of variants of napi_schedule().
- Simplify error handling when composing devlink health messages.
Misc:
- A lot of KCSAN data race "fixes", from Eric.
- A lot of __counted_by() annotations, from Kees.
- A lot of strncpy -> strscpy and printf format fixes.
- Replace master/slave terminology with conduit/user in DSA drivers.
- Handful of KUnit tests for netdev and WiFi core.
Removed:
- AppleTalk COPS.
- AppleTalk ipddp.
- TI AR7 CPMAC Ethernet driver.
Drivers:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload
- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)
- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block
selection for IPv6 multicast forwarding and ordering of blocks
in ACL region
- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port
- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking
- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers
- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support
- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend"
* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
net: mana: Use xdp_set_features_flag instead of direct assignment
vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
iavf: delete the iavf client interface
iavf: add a common function for undoing the interrupt scheme
iavf: use unregister_netdev
iavf: rely on netdev's own registered state
iavf: fix the waiting time for initial reset
iavf: in iavf_down, don't queue watchdog_task if comms failed
iavf: simplify mutex_trylock+sleep loops
iavf: fix comments about old bit locks
doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
tools: ynl: introduce option to process unknown attributes or types
ipvlan: properly track tx_errors
netdevsim: Block until all devices are released
nfp: using napi_build_skb() to replace build_skb()
net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
...
Diffstat (limited to 'Documentation')
75 files changed, 4486 insertions, 529 deletions
diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst index 4877563241f3..c7525942f12c 100644 --- a/Documentation/admin-guide/sysctl/net.rst +++ b/Documentation/admin-guide/sysctl/net.rst @@ -71,6 +71,7 @@ two flavors of JITs, the newer eBPF JIT currently supported on: - s390x - riscv64 - riscv32 + - loongarch64 And the older cBPF JIT supported on the following archs: diff --git a/Documentation/bpf/libbpf/program_types.rst b/Documentation/bpf/libbpf/program_types.rst index ad4d4d5eecb0..63bb88846e50 100644 --- a/Documentation/bpf/libbpf/program_types.rst +++ b/Documentation/bpf/libbpf/program_types.rst @@ -56,6 +56,16 @@ described in more detail in the footnotes. | | ``BPF_CGROUP_UDP6_RECVMSG`` | ``cgroup/recvmsg6`` | | + +----------------------------------------+----------------------------------+-----------+ | | ``BPF_CGROUP_UDP6_SENDMSG`` | ``cgroup/sendmsg6`` | | +| +----------------------------------------+----------------------------------+-----------+ +| | ``BPF_CGROUP_UNIX_CONNECT`` | ``cgroup/connect_unix`` | | +| +----------------------------------------+----------------------------------+-----------+ +| | ``BPF_CGROUP_UNIX_SENDMSG`` | ``cgroup/sendmsg_unix`` | | +| +----------------------------------------+----------------------------------+-----------+ +| | ``BPF_CGROUP_UNIX_RECVMSG`` | ``cgroup/recvmsg_unix`` | | +| +----------------------------------------+----------------------------------+-----------+ +| | ``BPF_CGROUP_UNIX_GETPEERNAME`` | ``cgroup/getpeername_unix`` | | +| +----------------------------------------+----------------------------------+-----------+ +| | ``BPF_CGROUP_UNIX_GETSOCKNAME`` | ``cgroup/getsockname_unix`` | | +-------------------------------------------+----------------------------------------+----------------------------------+-----------+ | ``BPF_PROG_TYPE_CGROUP_SOCK`` | ``BPF_CGROUP_INET4_POST_BIND`` | ``cgroup/post_bind4`` | | + +----------------------------------------+----------------------------------+-----------+ diff --git a/Documentation/bpf/prog_flow_dissector.rst b/Documentation/bpf/prog_flow_dissector.rst index 4d86780ab0f1..f24270b8b034 100644 --- a/Documentation/bpf/prog_flow_dissector.rst +++ b/Documentation/bpf/prog_flow_dissector.rst @@ -113,7 +113,7 @@ Flags used by ``eth_get_headlen`` to estimate length of all headers for GRO. * ``BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL`` - tells BPF flow dissector to stop parsing as soon as it reaches IPv6 flow label; used by - ``___skb_get_hash`` and ``__skb_get_hash_symmetric`` to get flow hash. + ``___skb_get_hash`` to get flow hash. * ``BPF_FLOW_DISSECTOR_F_STOP_AT_ENCAP`` - tells BPF flow dissector to stop parsing as soon as it reaches encapsulated headers; used by routing infrastructure. diff --git a/Documentation/bpf/standardization/instruction-set.rst b/Documentation/bpf/standardization/instruction-set.rst index c5d53a6e8c79..245b6defc298 100644 --- a/Documentation/bpf/standardization/instruction-set.rst +++ b/Documentation/bpf/standardization/instruction-set.rst @@ -283,6 +283,14 @@ For signed operations (``BPF_SDIV`` and ``BPF_SMOD``), for ``BPF_ALU``, is first :term:`sign extended<Sign Extend>` from 32 to 64 bits, and then interpreted as a 64-bit signed value. +Note that there are varying definitions of the signed modulo operation +when the dividend or divisor are negative, where implementations often +vary by language such that Python, Ruby, etc. differ from C, Go, Java, +etc. This specification requires that signed modulo use truncated division +(where -13 % 3 == -1) as implemented in C, Go, etc.: + + a % n = a - n * trunc(a / n) + The ``BPF_MOVSX`` instruction does a move operation with sign extension. ``BPF_ALU | BPF_MOVSX`` :term:`sign extends<Sign Extend>` 8-bit and 16-bit operands into 32 bit operands, and zeroes the remaining upper 32 bits. diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml index 28ded09d72e3..e7720caf31b3 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml @@ -22,6 +22,7 @@ properties: - mediatek,mt7622-wed - mediatek,mt7981-wed - mediatek,mt7986-wed + - mediatek,mt7988-wed - const: syscon reg: diff --git a/Documentation/devicetree/bindings/i3c/i3c.yaml b/Documentation/devicetree/bindings/i3c/i3c.yaml index ab69f4115de4..d9483fbd2454 100644 --- a/Documentation/devicetree/bindings/i3c/i3c.yaml +++ b/Documentation/devicetree/bindings/i3c/i3c.yaml @@ -55,6 +55,12 @@ properties: May not be supported by all controllers. + mctp-controller: + type: boolean + description: | + Indicates that the system is accessible via this bus as an endpoint for + MCTP over I3C transport. + required: - "#address-cells" - "#size-cells" diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 8103154bbb52..c77d7b155a4c 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -49,6 +49,8 @@ properties: - hisilicon,peri-subctrl - hpe,gxp-sysreg - intel,lgm-syscon + - loongson,ls1b-syscon + - loongson,ls1c-syscon - marvell,armada-3700-usb2-host-misc - mediatek,mt8135-pctl-a-syscfg - mediatek,mt8135-pctl-b-syscfg diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index 4bfac9186886..7fe0352dff0f 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -158,6 +158,8 @@ allOf: patternProperties: "^ethernet-phy@[0-9a-f]$": type: object + $ref: ethernet-phy.yaml# + unevaluatedProperties: false description: Integrated PHY node diff --git a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml index aa3162c74833..75d8138298fb 100644 --- a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml +++ b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml @@ -53,7 +53,7 @@ properties: const: 0 patternProperties: - "^port@[0-9]+$": + "^port@[0-9a-f]+$": type: object $ref: ethernet-controller.yaml# diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml index b06c416893ff..f21bdd0f408d 100644 --- a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml +++ b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml @@ -78,6 +78,7 @@ properties: ports: type: object + additionalProperties: true patternProperties: '^port@[0-9a-f]$': diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index ec74a660beda..6107189d276a 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -40,17 +40,8 @@ $defs: patternProperties: "^(ethernet-)?ports$": - type: object - additionalProperties: false - - properties: - '#address-cells': - const: 1 - '#size-cells': - const: 0 - patternProperties: - "^(ethernet-)?port@[0-9]+$": + "^(ethernet-)?port@[0-9a-f]+$": description: Ethernet switch ports $ref: dsa-port.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml index e532c6b795f4..1c2444121e60 100644 --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml @@ -60,7 +60,7 @@ description: | Check out example 6. - - Port 5 can be wired to an external phy. Port 5 becomes a DSA slave. + - Port 5 can be wired to an external phy. Port 5 becomes a DSA user port. For the multi-chip module MT7530, the external phy must be wired TX to TX to gmac1 of the SoC for this to work. Ubiquiti EdgeRouter X SFP is wired @@ -154,10 +154,12 @@ properties: patternProperties: "^(ethernet-)?ports$": type: object + additionalProperties: true patternProperties: - "^(ethernet-)?port@[0-9]+$": + "^(ethernet-)?port@[0-6]$": type: object + additionalProperties: true properties: reg: @@ -184,7 +186,7 @@ $defs: patternProperties: "^(ethernet-)?ports$": patternProperties: - "^(ethernet-)?port@[0-9]+$": + "^(ethernet-)?port@[0-6]$": if: required: [ ethernet ] then: @@ -210,7 +212,7 @@ $defs: patternProperties: "^(ethernet-)?ports$": patternProperties: - "^(ethernet-)?port@[0-9]+$": + "^(ethernet-)?port@[0-6]$": if: required: [ ethernet ] then: diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml index 03b5567be389..b3029c64d0d5 100644 --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -38,6 +38,8 @@ properties: Should be a gpio specifier for a reset line. maxItems: 1 + wakeup-source: true + microchip,synclko-125: $ref: /schemas/types.yaml#/definitions/flag description: @@ -49,6 +51,26 @@ properties: Set if the output SYNCLKO clock should be disabled. Do not mix with microchip,synclko-125. + microchip,io-drive-strength-microamp: + description: + IO Pad Drive Strength + enum: [8000, 16000] + default: 16000 + + microchip,hi-drive-strength-microamp: + description: + High Speed Drive Strength. Controls drive strength of GMII / RGMII / + MII / RMII (except TX_CLK/REFCLKI, COL and CRS) and CLKO_25_125 lines. + enum: [2000, 4000, 8000, 12000, 16000, 20000, 24000, 28000] + default: 24000 + + microchip,lo-drive-strength-microamp: + description: + Low Speed Drive Strength. Controls drive strength of TX_CLK / REFCLKI, + COL, CRS, LEDs, PME_N, NTRP_N, SDO and SDI/SDA/MDIO lines. + enum: [2000, 4000, 8000, 12000, 16000, 20000, 24000, 28000] + default: 8000 + interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml index 8d7e878b84dc..9973d64f15a7 100644 --- a/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml +++ b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml @@ -37,8 +37,9 @@ properties: patternProperties: "^(ethernet-)?ports$": + additionalProperties: true patternProperties: - "^(ethernet-)?port@[0-9]+$": + "^(ethernet-)?port@[0-7]$": allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml index 4d5f5cc6d031..9432565f4f5d 100644 --- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml @@ -43,6 +43,7 @@ properties: # PHY 1. mdios: type: object + additionalProperties: false properties: '#address-cells': @@ -74,8 +75,9 @@ properties: patternProperties: "^(ethernet-)?ports$": + additionalProperties: true patternProperties: - "^(ethernet-)?port@[0-9]+$": + "^(ethernet-)?port@[0-9]$": allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml index df64eebebe18..167398ab253a 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml @@ -73,6 +73,7 @@ $ref: dsa.yaml# patternProperties: "^(ethernet-)?ports$": type: object + additionalProperties: true patternProperties: "^(ethernet-)?port@[0-6]$": type: object diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml index cfd69c2604ea..cce692f57b08 100644 --- a/Documentation/devicetree/bindings/net/dsa/realtek.yaml +++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml @@ -68,6 +68,8 @@ properties: interrupt-controller: type: object + additionalProperties: false + description: | This defines an interrupt controller with an IRQ line (typically a GPIO) that will demultiplex and handle the interrupt from the single diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml index 833d2f68daa1..ea285ef3e64f 100644 --- a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml +++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml @@ -61,17 +61,11 @@ properties: ethernet-ports: type: object - properties: - '#address-cells': - const: 1 - '#size-cells': - const: 0 - + additionalProperties: true patternProperties: "^(ethernet-)?port@[0-4]$": type: object - description: Ethernet switch ports - + additionalProperties: true properties: pcs-handle: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml index 82a5d7927ca4..34fd24ff6a71 100644 --- a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml +++ b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml @@ -63,6 +63,7 @@ properties: mdio: type: object $ref: mdio.yaml# + unevaluatedProperties: false description: optional node for embedded MDIO controller required: diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml index f1b9075dc7fb..72ac67ca3415 100644 --- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml @@ -36,7 +36,7 @@ patternProperties: const: 0 patternProperties: - "^(ethernet-)?port@[0-9]+$": + "^(ethernet-)?port@[0-9a-f]+$": type: object description: Ethernet switch ports @@ -53,14 +53,16 @@ oneOf: additionalProperties: true $defs: - base: + ethernet-ports: description: An ethernet switch without any extra port properties $ref: '#' patternProperties: - "^(ethernet-)?port@[0-9]+$": - description: Ethernet switch ports - $ref: ethernet-switch-port.yaml# - unevaluatedProperties: false + "^(ethernet-)?ports$": + patternProperties: + "^(ethernet-)?port@[0-9a-f]+$": + description: Ethernet switch ports + $ref: ethernet-switch-port.yaml# + unevaluatedProperties: false ... diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml index b494e009326e..8948a11c994e 100644 --- a/Documentation/devicetree/bindings/net/fsl,fec.yaml +++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml @@ -59,6 +59,7 @@ properties: - const: fsl,imx6sx-fec - items: - enum: + - fsl,imx8dxl-fec - fsl,imx8qxp-fec - const: fsl,imx8qm-fec - const: fsl,imx6sx-fec diff --git a/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml b/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml new file mode 100644 index 000000000000..c4f3224bad38 --- /dev/null +++ b/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/loongson,ls1b-gmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-1B Gigabit Ethernet MAC Controller + +maintainers: + - Keguang Zhang <keguang.zhang@gmail.com> + +description: | + Loongson-1B Gigabit Ethernet MAC Controller is based on + Synopsys DesignWare MAC (version 3.50a). + + Main features + - Dual 10/100/1000Mbps GMAC controllers + - Full-duplex operation (IEEE 802.3x flow control automatic transmission) + - Half-duplex operation (CSMA/CD Protocol and back-pressure support) + - RX Checksum Offload + - TX Checksum insertion + - MII interface + - RGMII interface + +select: + properties: + compatible: + contains: + enum: + - loongson,ls1b-gmac + required: + - compatible + +properties: + compatible: + items: + - enum: + - loongson,ls1b-gmac + - const: snps,dwmac-3.50a + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: stmmaceth + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: macirq + + loongson,ls1-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon containing some extra configurations + including PHY interface mode. + + phy-mode: + enum: + - mii + - rgmii-id + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - loongson,ls1-syscon + +allOf: + - $ref: snps,dwmac.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/loongson,ls1x-clk.h> + #include <dt-bindings/interrupt-controller/irq.h> + + gmac0: ethernet@1fe10000 { + compatible = "loongson,ls1b-gmac", "snps,dwmac-3.50a"; + reg = <0x1fe10000 0x10000>; + + clocks = <&clkc LS1X_CLKID_AHB>; + clock-names = "stmmaceth"; + + interrupt-parent = <&intc1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + + loongson,ls1-syscon = <&syscon>; + + phy-handle = <&phy0>; + phy-mode = "mii"; + snps,pbl = <1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml b/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml new file mode 100644 index 000000000000..99001b940b83 --- /dev/null +++ b/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/loongson,ls1c-emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-1C Ethernet MAC Controller + +maintainers: + - Keguang Zhang <keguang.zhang@gmail.com> + +description: | + Loongson-1C Ethernet MAC Controller is based on + Synopsys DesignWare MAC (version 3.50a). + + Main features + - 10/100Mbps + - Full-duplex operation (IEEE 802.3x flow control automatic transmission) + - Half-duplex operation (CSMA/CD Protocol and back-pressure support) + - IEEE 802.1Q VLAN tag detection for reception frames + - MII interface + - RMII interface + +select: + properties: + compatible: + contains: + enum: + - loongson,ls1c-emac + required: + - compatible + +properties: + compatible: + items: + - enum: + - loongson,ls1c-emac + - const: snps,dwmac-3.50a + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: stmmaceth + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: macirq + + loongson,ls1-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon containing some extra configurations + including PHY interface mode. + + phy-mode: + enum: + - mii + - rmii + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - loongson,ls1-syscon + +allOf: + - $ref: snps,dwmac.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/loongson,ls1x-clk.h> + #include <dt-bindings/interrupt-controller/irq.h> + + emac: ethernet@1fe10000 { + compatible = "loongson,ls1c-emac", "snps,dwmac-3.50a"; + reg = <0x1fe10000 0x10000>; + + clocks = <&clkc LS1X_CLKID_AHB>; + clock-names = "stmmaceth"; + + interrupt-parent = <&intc1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + + loongson,ls1-syscon = <&syscon>; + + phy-handle = <&phy0>; + phy-mode = "mii"; + snps,pbl = <1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@13 { + reg = <0x13>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml index 8ee2c7d7ff42..86a9c3fc76c8 100644 --- a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml +++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml @@ -24,7 +24,7 @@ allOf: compatible: const: mscc,vsc7514-switch then: - $ref: ethernet-switch.yaml# + $ref: ethernet-switch.yaml#/$defs/ethernet-ports required: - interrupts - interrupt-names @@ -33,28 +33,18 @@ allOf: minItems: 21 reg-names: minItems: 21 - ethernet-ports: - patternProperties: - "^port@[0-9a-f]+$": - $ref: ethernet-switch-port.yaml# - unevaluatedProperties: false - if: properties: compatible: const: mscc,vsc7512-switch then: - $ref: /schemas/net/dsa/dsa.yaml# + $ref: /schemas/net/dsa/dsa.yaml#/$defs/ethernet-ports properties: reg: maxItems: 20 reg-names: maxItems: 20 - ethernet-ports: - patternProperties: - "^port@[0-9a-f]+$": - $ref: /schemas/net/dsa/dsa-port.yaml# - unevaluatedProperties: false properties: compatible: @@ -185,7 +175,7 @@ examples: }; # VSC7512 (DSA) - | - ethernet-switch@1{ + ethernet-switch@1 { compatible = "mscc,vsc7512-switch"; reg = <0x71010000 0x10000>, <0x71030000 0x10000>, @@ -212,22 +202,22 @@ examples: "port7", "port8", "port9", "port10", "qsys", "ana", "s0", "s1", "s2"; - ethernet-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - ethernet = <&mac_sw>; - phy-handle = <&phy0>; - phy-mode = "internal"; - }; - port@1 { - reg = <1>; - phy-handle = <&phy1>; - phy-mode = "internal"; - }; + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ethernet = <&mac_sw>; + phy-handle = <&phy0>; + phy-mode = "internal"; + }; + port@1 { + reg = <1>; + phy-handle = <&phy1>; + phy-mode = "internal"; }; }; + }; ... diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml index ab8867e6939b..85bfa45f5122 100644 --- a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml +++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml @@ -20,6 +20,7 @@ allOf: patternProperties: "^ethernet-phy@[0-9a-f]+$": type: object + additionalProperties: false description: | Some packages have multiple PHYs. Secondary PHY should be defines as subnode of the first (parent) PHY. diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml index 06b38c9bc6ec..29355ab98569 100644 --- a/Documentation/devicetree/bindings/net/renesas,ether.yaml +++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml @@ -81,9 +81,8 @@ properties: active-high patternProperties: - "^ethernet-phy@[0-9a-f]$": + "@[0-9a-f]$": type: object - $ref: ethernet-phy.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml index 3f41294f5997..5d074f27d462 100644 --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -109,9 +109,8 @@ properties: enum: [0, 2000] patternProperties: - "^ethernet-phy@[0-9a-f]$": + "@[0-9a-f]$": type: object - $ref: ethernet-phy.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index ddf9522a5dc2..5c2769dc689a 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -394,6 +394,11 @@ properties: When a PFC frame is received with priorities matching the bitmask, the queue is blocked from transmitting for the pause time specified in the PFC frame. + + snps,coe-unsupported: + type: boolean + description: TX checksum offload is unsupported by the TX queue. + allOf: - if: required: diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index b04ac4966608..f07ae3173b03 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -86,7 +86,7 @@ properties: const: 0 patternProperties: - "^port@[0-9]+$": + "^port@[12]$": type: object description: CPSW external ports diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml index 311c570165f9..229c8f32019f 100644 --- a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml +++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml @@ -19,6 +19,7 @@ allOf: properties: compatible: enum: + - ti,am642-icssg-prueth # for AM64x SoC family - ti,am654-icssg-prueth # for AM65x SoC family sram: @@ -106,6 +107,13 @@ properties: phandle to system controller node and register offset to ICSSG control register for RGMII transmit delay + ti,half-duplex-capable: + type: boolean + description: + Indicates that the PHY output pin COL is routed to ICSSG GPIO pin + (PRGx_PRU0/1_GPIO10) as input so that the ICSSG MII port is + capable of half duplex operations. + required: - reg anyOf: diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml index f0fa92b04b32..3b212f26abc5 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml @@ -20,6 +20,7 @@ properties: items: - enum: - mediatek,mt7986-wo-ccif + - mediatek,mt7988-wo-ccif - const: syscon reg: diff --git a/Documentation/driver-api/80211/mac80211.rst b/Documentation/driver-api/80211/mac80211.rst index 67d2e58b45e4..e38a220401f5 100644 --- a/Documentation/driver-api/80211/mac80211.rst +++ b/Documentation/driver-api/80211/mac80211.rst @@ -120,7 +120,7 @@ functions/definitions ieee80211_rx ieee80211_rx_ni ieee80211_rx_irqsafe - ieee80211_tx_status + ieee80211_tx_status_skb ieee80211_tx_status_ni ieee80211_tx_status_irqsafe ieee80211_rts_get diff --git a/Documentation/driver-api/dpll.rst b/Documentation/driver-api/dpll.rst new file mode 100644 index 000000000000..e3d593841aa7 --- /dev/null +++ b/Documentation/driver-api/dpll.rst @@ -0,0 +1,551 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============================== +The Linux kernel dpll subsystem +=============================== + +DPLL +==== + +PLL - Phase Locked Loop is an electronic circuit which syntonizes clock +signal of a device with an external clock signal. Effectively enabling +device to run on the same clock signal beat as provided on a PLL input. + +DPLL - Digital Phase Locked Loop is an integrated circuit which in +addition to plain PLL behavior incorporates a digital phase detector +and may have digital divider in the loop. As a result, the frequency on +DPLL's input and output may be configurable. + +Subsystem +========= + +The main purpose of dpll subsystem is to provide general interface +to configure devices that use any kind of Digital PLL and could use +different sources of input signal to synchronize to, as well as +different types of outputs. +The main interface is NETLINK_GENERIC based protocol with an event +monitoring multicast group defined. + +Device object +============= + +Single dpll device object means single Digital PLL circuit and bunch of +connected pins. +It reports the supported modes of operation and current status to the +user in response to the `do` request of netlink command +``DPLL_CMD_DEVICE_GET`` and list of dplls registered in the subsystem +with `dump` netlink request of the same command. +Changing the configuration of dpll device is done with `do` request of +netlink ``DPLL_CMD_DEVICE_SET`` command. +A device handle is ``DPLL_A_ID``, it shall be provided to get or set +configuration of particular device in the system. It can be obtained +with a ``DPLL_CMD_DEVICE_GET`` `dump` request or +a ``DPLL_CMD_DEVICE_ID_GET`` `do` request, where the one must provide +attributes that result in single device match. + +Pin object +========== + +A pin is amorphic object which represents either input or output, it +could be internal component of the device, as well as externally +connected. +The number of pins per dpll vary, but usually multiple pins shall be +provided for a single dpll device. +Pin's properties, capabilities and status is provided to the user in +response to `do` request of netlink ``DPLL_CMD_PIN_GET`` command. +It is also possible to list all the pins that were registered in the +system with `dump` request of ``DPLL_CMD_PIN_GET`` command. +Configuration of a pin can be changed by `do` request of netlink +``DPLL_CMD_PIN_SET`` command. +Pin handle is a ``DPLL_A_PIN_ID``, it shall be provided to get or set +configuration of particular pin in the system. It can be obtained with +``DPLL_CMD_PIN_GET`` `dump` request or ``DPLL_CMD_PIN_ID_GET`` `do` +request, where user provides attributes that result in single pin match. + +Pin selection +============= + +In general, selected pin (the one which signal is driving the dpll +device) can be obtained from ``DPLL_A_PIN_STATE`` attribute, and only +one pin shall be in ``DPLL_PIN_STATE_CONNECTED`` state for any dpll +device. + +Pin selection can be done either manually or automatically, depending +on hardware capabilities and active dpll device work mode +(``DPLL_A_MODE`` attribute). The consequence is that there are +differences for each mode in terms of available pin states, as well as +for the states the user can request for a dpll device. + +In manual mode (``DPLL_MODE_MANUAL``) the user can request or receive +one of following pin states: + +- ``DPLL_PIN_STATE_CONNECTED`` - the pin is used to drive dpll device +- ``DPLL_PIN_STATE_DISCONNECTED`` - the pin is not used to drive dpll + device + +In automatic mode (``DPLL_MODE_AUTOMATIC``) the user can request or +receive one of following pin states: + +- ``DPLL_PIN_STATE_SELECTABLE`` - the pin shall be considered as valid + input for automatic selection algorithm +- ``DPLL_PIN_STATE_DISCONNECTED`` - the pin shall be not considered as + a valid input for automatic selection algorithm + +In automatic mode (``DPLL_MODE_AUTOMATIC``) the user can only receive +pin state ``DPLL_PIN_STATE_CONNECTED`` once automatic selection +algorithm locks a dpll device with one of the inputs. + +Shared pins +=========== + +A single pin object can be attached to multiple dpll devices. +Then there are two groups of configuration knobs: + +1) Set on a pin - the configuration affects all dpll devices pin is + registered to (i.e., ``DPLL_A_PIN_FREQUENCY``), +2) Set on a pin-dpll tuple - the configuration affects only selected + dpll device (i.e., ``DPLL_A_PIN_PRIO``, ``DPLL_A_PIN_STATE``, + ``DPLL_A_PIN_DIRECTION``). + +MUX-type pins +============= + +A pin can be MUX-type, it aggregates child pins and serves as a pin +multiplexer. One or more pins are registered with MUX-type instead of +being directly registered to a dpll device. +Pins registered with a MUX-type pin provide user with additional nested +attribute ``DPLL_A_PIN_PARENT_PIN`` for each parent they were registered +with. +If a pin was registered with multiple parent pins, they behave like a +multiple output multiplexer. In this case output of a +``DPLL_CMD_PIN_GET`` would contain multiple pin-parent nested +attributes with current state related to each parent, like:: + + 'pin': [{{ + 'clock-id': 282574471561216, + 'module-name': 'ice', + 'capabilities': 4, + 'id': 13, + 'parent-pin': [ + {'parent-id': 2, 'state': 'connected'}, + {'parent-id': 3, 'state': 'disconnected'} + ], + 'type': 'synce-eth-port' + }}] + +Only one child pin can provide its signal to the parent MUX-type pin at +a time, the selection is done by requesting change of a child pin state +on desired parent, with the use of ``DPLL_A_PIN_PARENT`` nested +attribute. Example of netlink `set state on parent pin` message format: + + ========================== ============================================= + ``DPLL_A_PIN_ID`` child pin id + ``DPLL_A_PIN_PARENT_PIN`` nested attribute for requesting configuration + related to parent pin + ``DPLL_A_PIN_PARENT_ID`` parent pin id + ``DPLL_A_PIN_STATE`` requested pin state on parent + ========================== ============================================= + +Pin priority +============ + +Some devices might offer a capability of automatic pin selection mode +(enum value ``DPLL_MODE_AUTOMATIC`` of ``DPLL_A_MODE`` attribute). +Usually, automatic selection is performed on the hardware level, which +means only pins directly connected to the dpll can be used for automatic +input pin selection. +In automatic selection mode, the user cannot manually select a input +pin for the device, instead the user shall provide all directly +connected pins with a priority ``DPLL_A_PIN_PRIO``, the device would +pick a highest priority valid signal and use it to control the DPLL +device. Example of netlink `set priority on parent pin` message format: + + ============================ ============================================= + ``DPLL_A_PIN_ID`` configured pin id + ``DPLL_A_PIN_PARENT_DEVICE`` nested attribute for requesting configuration + related to parent dpll device + ``DPLL_A_PIN_PARENT_ID`` parent dpll device id + ``DPLL_A_PIN_PRIO`` requested pin prio on parent dpll + ============================ ============================================= + +Child pin of MUX-type pin is not capable of automatic input pin selection, +in order to configure active input of a MUX-type pin, the user needs to +request desired pin state of the child pin on the parent pin, +as described in the ``MUX-type pins`` chapter. + +Phase offset measurement and adjustment +======================================== + +Device may provide ability to measure a phase difference between signals +on a pin and its parent dpll device. If pin-dpll phase offset measurement +is supported, it shall be provided with ``DPLL_A_PIN_PHASE_OFFSET`` +attribute for each parent dpll device. + +Device may also provide ability to adjust a signal phase on a pin. +If pin phase adjustment is supported, minimal and maximal values that pin +handle shall be provide to the user on ``DPLL_CMD_PIN_GET`` respond +with ``DPLL_A_PIN_PHASE_ADJUST_MIN`` and ``DPLL_A_PIN_PHASE_ADJUST_MAX`` +attributes. Configured phase adjust value is provided with +``DPLL_A_PIN_PHASE_ADJUST`` attribute of a pin, and value change can be +requested with the same attribute with ``DPLL_CMD_PIN_SET`` command. + + =============================== ====================================== + ``DPLL_A_PIN_ID`` configured pin id + ``DPLL_A_PIN_PHASE_ADJUST_MIN`` attr minimum value of phase adjustment + ``DPLL_A_PIN_PHASE_ADJUST_MAX`` attr maximum value of phase adjustment + ``DPLL_A_PIN_PHASE_ADJUST`` attr configured value of phase + adjustment on parent dpll device + ``DPLL_A_PIN_PARENT_DEVICE`` nested attribute for requesting + configuration on given parent dpll + device + ``DPLL_A_PIN_PARENT_ID`` parent dpll device id + ``DPLL_A_PIN_PHASE_OFFSET`` attr measured phase difference + between a pin and parent dpll device + =============================== ====================================== + +All phase related values are provided in pico seconds, which represents +time difference between signals phase. The negative value means that +phase of signal on pin is earlier in time than dpll's signal. Positive +value means that phase of signal on pin is later in time than signal of +a dpll. + +Phase adjust (also min and max) values are integers, but measured phase +offset values are fractional with 3-digit decimal places and shell be +divided with ``DPLL_PIN_PHASE_OFFSET_DIVIDER`` to get integer part and +modulo divided to get fractional part. + +Configuration commands group +============================ + +Configuration commands are used to get information about registered +dpll devices (and pins), as well as set configuration of device or pins. +As dpll devices must be abstracted and reflect real hardware, +there is no way to add new dpll device via netlink from user space and +each device should be registered by its driver. + +All netlink commands require ``GENL_ADMIN_PERM``. This is to prevent +any spamming/DoS from unauthorized userspace applications. + +List of netlink commands with possible attributes +================================================= + +Constants identifying command types for dpll device uses a +``DPLL_CMD_`` prefix and suffix according to command purpose. +The dpll device related attributes use a ``DPLL_A_`` prefix and +suffix according to attribute purpose. + + ==================================== ================================= + ``DPLL_CMD_DEVICE_ID_GET`` command to get device ID + ``DPLL_A_MODULE_NAME`` attr module name of registerer + ``DPLL_A_CLOCK_ID`` attr Unique Clock Identifier + (EUI-64), as defined by the + IEEE 1588 standard + ``DPLL_A_TYPE`` attr type of dpll device + ==================================== ================================= + + ==================================== ================================= + ``DPLL_CMD_DEVICE_GET`` command to get device info or + dump list of available devices + ``DPLL_A_ID`` attr unique dpll device ID + ``DPLL_A_MODULE_NAME`` attr module name of registerer + ``DPLL_A_CLOCK_ID`` attr Unique Clock Identifier + (EUI-64), as defined by the + IEEE 1588 standard + ``DPLL_A_MODE`` attr selection mode + ``DPLL_A_MODE_SUPPORTED`` attr available selection modes + ``DPLL_A_LOCK_STATUS`` attr dpll device lock status + ``DPLL_A_TEMP`` attr device temperature info + ``DPLL_A_TYPE`` attr type of dpll device + ==================================== ================================= + + ==================================== ================================= + ``DPLL_CMD_DEVICE_SET`` command to set dpll device config + ``DPLL_A_ID`` attr internal dpll device index + ``DPLL_A_MODE`` attr selection mode to configure + ==================================== ================================= + +Constants identifying command types for pins uses a +``DPLL_CMD_PIN_`` prefix and suffix according to command purpose. +The pin related attributes use a ``DPLL_A_PIN_`` prefix and suffix +according to attribute purpose. + + ==================================== ================================= + ``DPLL_CMD_PIN_ID_GET`` command to get pin ID + ``DPLL_A_PIN_MODULE_NAME`` attr module name of registerer + ``DPLL_A_PIN_CLOCK_ID`` attr Unique Clock Identifier + (EUI-64), as defined by the + IEEE 1588 standard + ``DPLL_A_PIN_BOARD_LABEL`` attr pin board label provided + by registerer + ``DPLL_A_PIN_PANEL_LABEL`` attr pin panel label provided + by registerer + ``DPLL_A_PIN_PACKAGE_LABEL`` attr pin package label provided + by registerer + ``DPLL_A_PIN_TYPE`` attr type of a pin + ==================================== ================================= + + ==================================== ================================== + ``DPLL_CMD_PIN_GET`` command to get pin info or dump + list of available pins + ``DPLL_A_PIN_ID`` attr unique a pin ID + ``DPLL_A_PIN_MODULE_NAME`` attr module name of registerer + ``DPLL_A_PIN_CLOCK_ID`` attr Unique Clock Identifier + (EUI-64), as defined by the + IEEE 1588 standard + ``DPLL_A_PIN_BOARD_LABEL`` attr pin board label provided + by registerer + ``DPLL_A_PIN_PANEL_LABEL`` attr pin panel label provided + by registerer + ``DPLL_A_PIN_PACKAGE_LABEL`` attr pin package label provided + by registerer + ``DPLL_A_PIN_TYPE`` attr type of a pin + ``DPLL_A_PIN_FREQUENCY`` attr current frequency of a pin + ``DPLL_A_PIN_FREQUENCY_SUPPORTED`` nested attr provides supported + frequencies + ``DPLL_A_PIN_ANY_FREQUENCY_MIN`` attr minimum value of frequency + ``DPLL_A_PIN_ANY_FREQUENCY_MAX`` attr maximum value of frequency + ``DPLL_A_PIN_PHASE_ADJUST_MIN`` attr minimum value of phase + adjustment + ``DPLL_A_PIN_PHASE_ADJUST_MAX`` attr maximum value of phase + adjustment + ``DPLL_A_PIN_PHASE_ADJUST`` attr configured value of phase + adjustment on parent device + ``DPLL_A_PIN_PARENT_DEVICE`` nested attr for each parent device + the pin is connected with + ``DPLL_A_PIN_PARENT_ID`` attr parent dpll device id + ``DPLL_A_PIN_PRIO`` attr priority of pin on the + dpll device + ``DPLL_A_PIN_STATE`` attr state of pin on the parent + dpll device + ``DPLL_A_PIN_DIRECTION`` attr direction of a pin on the + parent dpll device + ``DPLL_A_PIN_PHASE_OFFSET`` attr measured phase difference + between a pin and parent dpll + ``DPLL_A_PIN_PARENT_PIN`` nested attr for each parent pin + the pin is connected with + ``DPLL_A_PIN_PARENT_ID`` attr parent pin id + ``DPLL_A_PIN_STATE`` attr state of pin on the parent + pin + ``DPLL_A_PIN_CAPABILITIES`` attr bitmask of pin capabilities + ==================================== ================================== + + ==================================== ================================= + ``DPLL_CMD_PIN_SET`` command to set pins configuration + ``DPLL_A_PIN_ID`` attr unique a pin ID + ``DPLL_A_PIN_FREQUENCY`` attr requested frequency of a pin + ``DPLL_A_PIN_PHASE_ADJUST`` attr requested value of phase + adjustment on parent device + ``DPLL_A_PIN_PARENT_DEVICE`` nested attr for each parent dpll + device configuration request + ``DPLL_A_PIN_PARENT_ID`` attr parent dpll device id + ``DPLL_A_PIN_DIRECTION`` attr requested direction of a pin + ``DPLL_A_PIN_PRIO`` attr requested priority of pin on + the dpll device + ``DPLL_A_PIN_STATE`` attr requested state of pin on + the dpll device + ``DPLL_A_PIN_PARENT_PIN`` nested attr for each parent pin + configuration request + ``DPLL_A_PIN_PARENT_ID`` attr parent pin id + ``DPLL_A_PIN_STATE`` attr requested state of pin on + parent pin + ==================================== ================================= + +Netlink dump requests +===================== + +The ``DPLL_CMD_DEVICE_GET`` and ``DPLL_CMD_PIN_GET`` commands are +capable of dump type netlink requests, in which case the response is in +the same format as for their ``do`` request, but every device or pin +registered in the system is returned. + +SET commands format +=================== + +``DPLL_CMD_DEVICE_SET`` - to target a dpll device, the user provides +``DPLL_A_ID``, which is unique identifier of dpll device in the system, +as well as parameter being configured (``DPLL_A_MODE``). + +``DPLL_CMD_PIN_SET`` - to target a pin user must provide a +``DPLL_A_PIN_ID``, which is unique identifier of a pin in the system. +Also configured pin parameters must be added. +If ``DPLL_A_PIN_FREQUENCY`` is configured, this affects all the dpll +devices that are connected with the pin, that is why frequency attribute +shall not be enclosed in ``DPLL_A_PIN_PARENT_DEVICE``. +Other attributes: ``DPLL_A_PIN_PRIO``, ``DPLL_A_PIN_STATE`` or +``DPLL_A_PIN_DIRECTION`` must be enclosed in +``DPLL_A_PIN_PARENT_DEVICE`` as their configuration relates to only one +of parent dplls, targeted by ``DPLL_A_PIN_PARENT_ID`` attribute which is +also required inside that nest. +For MUX-type pins the ``DPLL_A_PIN_STATE`` attribute is configured in +similar way, by enclosing required state in ``DPLL_A_PIN_PARENT_PIN`` +nested attribute and targeted parent pin id in ``DPLL_A_PIN_PARENT_ID``. + +In general, it is possible to configure multiple parameters at once, but +internally each parameter change will be invoked separately, where order +of configuration is not guaranteed by any means. + +Configuration pre-defined enums +=============================== + +.. kernel-doc:: include/uapi/linux/dpll.h + +Notifications +============= + +dpll device can provide notifications regarding status changes of the +device, i.e. lock status changes, input/output changes or other alarms. +There is one multicast group that is used to notify user-space apps via +netlink socket: ``DPLL_MCGRP_MONITOR`` + +Notifications messages: + + ============================== ===================================== + ``DPLL_CMD_DEVICE_CREATE_NTF`` dpll device was created + ``DPLL_CMD_DEVICE_DELETE_NTF`` dpll device was deleted + ``DPLL_CMD_DEVICE_CHANGE_NTF`` dpll device has changed + ``DPLL_CMD_PIN_CREATE_NTF`` dpll pin was created + ``DPLL_CMD_PIN_DELETE_NTF`` dpll pin was deleted + ``DPLL_CMD_PIN_CHANGE_NTF`` dpll pin has changed + ============================== ===================================== + +Events format is the same as for the corresponding get command. +Format of ``DPLL_CMD_DEVICE_`` events is the same as response of +``DPLL_CMD_DEVICE_GET``. +Format of ``DPLL_CMD_PIN_`` events is same as response of +``DPLL_CMD_PIN_GET``. + +Device driver implementation +============================ + +Device is allocated by dpll_device_get() call. Second call with the +same arguments will not create new object but provides pointer to +previously created device for given arguments, it also increases +refcount of that object. +Device is deallocated by dpll_device_put() call, which first +decreases the refcount, once refcount is cleared the object is +destroyed. + +Device should implement set of operations and register device via +dpll_device_register() at which point it becomes available to the +users. Multiple driver instances can obtain reference to it with +dpll_device_get(), as well as register dpll device with their own +ops and priv. + +The pins are allocated separately with dpll_pin_get(), it works +similarly to dpll_device_get(). Function first creates object and then +for each call with the same arguments only the object refcount +increases. Also dpll_pin_put() works similarly to dpll_device_put(). + +A pin can be registered with parent dpll device or parent pin, depending +on hardware needs. Each registration requires registerer to provide set +of pin callbacks, and private data pointer for calling them: + +- dpll_pin_register() - register pin with a dpll device, +- dpll_pin_on_pin_register() - register pin with another MUX type pin. + +Notifications of adding or removing dpll devices are created within +subsystem itself. +Notifications about registering/deregistering pins are also invoked by +the subsystem. +Notifications about status changes either of dpll device or a pin are +invoked in two ways: + +- after successful change was requested on dpll subsystem, the subsystem + calls corresponding notification, +- requested by device driver with dpll_device_change_ntf() or + dpll_pin_change_ntf() when driver informs about the status change. + +The device driver using dpll interface is not required to implement all +the callback operation. Nevertheless, there are few required to be +implemented. +Required dpll device level callback operations: + +- ``.mode_get``, +- ``.lock_status_get``. + +Required pin level callback operations: + +- ``.state_on_dpll_get`` (pins registered with dpll device), +- ``.state_on_pin_get`` (pins registered with parent pin), +- ``.direction_get``. + +Every other operation handler is checked for existence and +``-EOPNOTSUPP`` is returned in case of absence of specific handler. + +The simplest implementation is in the OCP TimeCard driver. The ops +structures are defined like this: + +.. code-block:: c + + static const struct dpll_device_ops dpll_ops = { + .lock_status_get = ptp_ocp_dpll_lock_status_get, + .mode_get = ptp_ocp_dpll_mode_get, + .mode_supported = ptp_ocp_dpll_mode_supported, + }; + + static const struct dpll_pin_ops dpll_pins_ops = { + .frequency_get = ptp_ocp_dpll_frequency_get, + .frequency_set = ptp_ocp_dpll_frequency_set, + .direction_get = ptp_ocp_dpll_direction_get, + .direction_set = ptp_ocp_dpll_direction_set, + .state_on_dpll_get = ptp_ocp_dpll_state_get, + }; + +The registration part is then looks like this part: + +.. code-block:: c + + clkid = pci_get_dsn(pdev); + bp->dpll = dpll_device_get(clkid, 0, THIS_MODULE); + if (IS_ERR(bp->dpll)) { + err = PTR_ERR(bp->dpll); + dev_err(&pdev->dev, "dpll_device_alloc failed\n"); + goto out; + } + + err = dpll_device_register(bp->dpll, DPLL_TYPE_PPS, &dpll_ops, bp); + if (err) + goto out; + + for (i = 0; i < OCP_SMA_NUM; i++) { + bp->sma[i].dpll_pin = dpll_pin_get(clkid, i, THIS_MODULE, &bp->sma[i].dpll_prop); + if (IS_ERR(bp->sma[i].dpll_pin)) { + err = PTR_ERR(bp->dpll); + goto out_dpll; + } + + err = dpll_pin_register(bp->dpll, bp->sma[i].dpll_pin, &dpll_pins_ops, + &bp->sma[i]); + if (err) { + dpll_pin_put(bp->sma[i].dpll_pin); + goto out_dpll; + } + } + +In the error path we have to rewind every allocation in the reverse order: + +.. code-block:: c + + while (i) { + --i; + dpll_pin_unregister(bp->dpll, bp->sma[i].dpll_pin, &dpll_pins_ops, &bp->sma[i]); + dpll_pin_put(bp->sma[i].dpll_pin); + } + dpll_device_put(bp->dpll); + +More complex example can be found in Intel's ICE driver or nVidia's mlx5 driver. + +SyncE enablement +================ +For SyncE enablement it is required to allow control over dpll device +for a software application which monitors and configures the inputs of +dpll device in response to current state of a dpll device and its +inputs. +In such scenario, dpll device input signal shall be also configurable +to drive dpll with signal recovered from the PHY netdevice. +This is done by exposing a pin to the netdevice - attaching pin to the +netdevice itself with +``netdev_dpll_pin_set(struct net_device *dev, struct dpll_pin *dpll_pin)``. +Exposed pin id handle ``DPLL_A_PIN_ID`` is then identifiable by the user +as it is attached to rtnetlink respond to get ``RTM_NEWLINK`` command in +nested attribute ``IFLA_DPLL_PIN``. diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index 1e16a40da3ba..f549a68951d7 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -114,6 +114,7 @@ available subsections can be seen below. zorro hte/index wmi + dpll .. only:: subproject and html diff --git a/Documentation/netlink/genetlink-c.yaml b/Documentation/netlink/genetlink-c.yaml index 9806c44f604c..c58f7153fcf8 100644 --- a/Documentation/netlink/genetlink-c.yaml +++ b/Documentation/netlink/genetlink-c.yaml @@ -13,6 +13,11 @@ $defs: type: [ string, integer ] pattern: ^[0-9A-Za-z_]+( - 1)?$ minimum: 0 + len-or-limit: + # literal int or limit based on fixed-width type e.g. u8-min, u16-max, etc. + type: [ string, integer ] + pattern: ^[su](8|16|32|64)-(min|max)$ + minimum: 0 # Schema for specs title: Protocol @@ -26,10 +31,6 @@ properties: type: string doc: type: string - version: - description: Generic Netlink family version. Default is 1. - type: integer - minimum: 1 protocol: description: Schema compatibility level. Default is "genetlink". enum: [ genetlink, genetlink-c ] @@ -46,6 +47,12 @@ properties: max-by-define: description: Makes the number of attributes and commands be specified by a define, not an enum value. type: boolean + cmd-max-name: + description: Name of the define for the last operation in the list. + type: string + cmd-cnt-name: + description: The explicit name for constant holding the count of operations (last operation + 1). + type: string # End genetlink-c definitions: @@ -142,13 +149,14 @@ properties: type: array items: type: object - required: [ name, type ] + required: [ name ] additionalProperties: False properties: name: type: string type: &attr-type - enum: [ unused, pad, flag, binary, u8, u16, u32, u64, s32, s64, + enum: [ unused, pad, flag, binary, + uint, sint, u8, u16, u32, u64, s32, s64, string, nest, array-nest, nest-type-value ] doc: description: Documentation of the attribute. @@ -187,13 +195,19 @@ properties: type: string min: description: Min value for an integer attribute. - type: integer + $ref: '#/$defs/len-or-limit' + max: + description: Max value for an integer attribute. + $ref: '#/$defs/len-or-limit' min-len: description: Min length for a binary attribute. $ref: '#/$defs/len-or-define' max-len: description: Max length for a string or a binary attribute. $ref: '#/$defs/len-or-define' + exact-len: + description: Exact length for a string or a binary attribute. + $ref: '#/$defs/len-or-define' sub-type: *attr-type display-hint: &display-hint description: | @@ -215,6 +229,18 @@ properties: not: required: [ name-prefix ] + # type property is only required if not in subset definition + if: + properties: + subset-of: + not: + type: string + then: + properties: + attributes: + items: + required: [ type ] + operations: description: Operations supported by the protocol. type: object @@ -275,6 +301,11 @@ properties: type: array items: enum: [ strict, dump, dump-strict ] + config-cond: + description: | + Name of the kernel config option gating the presence of + the operation, without the 'CONFIG_' prefix. + type: string do: &subop-type description: Main command handler. type: object diff --git a/Documentation/netlink/genetlink-legacy.yaml b/Documentation/netlink/genetlink-legacy.yaml index 12a0a045605d..938703088306 100644 --- a/Documentation/netlink/genetlink-legacy.yaml +++ b/Documentation/netlink/genetlink-legacy.yaml @@ -13,6 +13,11 @@ $defs: type: [ string, integer ] pattern: ^[0-9A-Za-z_]+( - 1)?$ minimum: 0 + len-or-limit: + # literal int or limit based on fixed-width type e.g. u8-min, u16-max, etc. + type: [ string, integer ] + pattern: ^[su](8|16|32|64)-(min|max)$ + minimum: 0 # Schema for specs title: Protocol @@ -26,10 +31,6 @@ properties: type: string doc: type: string - version: - description: Generic Netlink family version. Default is 1. - type: integer - minimum: 1 protocol: description: Schema compatibility level. Default is "genetlink". enum: [ genetlink, genetlink-c, genetlink-legacy ] # Trim @@ -46,6 +47,12 @@ properties: max-by-define: description: Makes the number of attributes and commands be specified by a define, not an enum value. type: boolean + cmd-max-name: + description: Name of the define for the last operation in the list. + type: string + cmd-cnt-name: + description: The explicit name for constant holding the count of operations (last operation + 1). + type: string # End genetlink-c # Start genetlink-legacy kernel-policy: @@ -53,6 +60,10 @@ properties: Defines if the input policy in the kernel is global, per-operation, or split per operation type. Default is split. enum: [ split, per-op, global ] + version: + description: Generic Netlink family version. Default is 1. + type: integer + minimum: 1 # End genetlink-legacy definitions: @@ -180,14 +191,15 @@ properties: type: array items: type: object - required: [ name, type ] + required: [ name ] additionalProperties: False properties: name: type: string type: &attr-type description: The netlink attribute type - enum: [ unused, pad, flag, binary, u8, u16, u32, u64, s32, s64, + enum: [ unused, pad, flag, binary, bitfield32, + uint, sint, u8, u16, u32, u64, s32, s64, string, nest, array-nest, nest-type-value ] doc: description: Documentation of the attribute. @@ -226,13 +238,19 @@ properties: type: string min: description: Min value for an integer attribute. - type: integer + $ref: '#/$defs/len-or-limit' + max: + description: Max value for an integer attribute. + $ref: '#/$defs/len-or-limit' min-len: description: Min length for a binary attribute. $ref: '#/$defs/len-or-define' max-len: description: Max length for a string or a binary attribute. $ref: '#/$defs/len-or-define' + exact-len: + description: Exact length for a string or a binary attribute. + $ref: '#/$defs/len-or-define' sub-type: *attr-type display-hint: *display-hint # Start genetlink-c @@ -254,6 +272,18 @@ properties: not: required: [ name-prefix ] + # type property is only required if not in subset definition + if: + properties: + subset-of: + not: + type: string + then: + properties: + attributes: + items: + required: [ type ] + operations: description: Operations supported by the protocol. type: object @@ -316,12 +346,17 @@ properties: description: Command flags. type: array items: - enum: [ admin-perm ] + enum: [ admin-perm, uns-admin-perm ] dont-validate: description: Kernel attribute validation flags. type: array items: enum: [ strict, dump, dump-strict ] + config-cond: + description: | + Name of the kernel config option gating the presence of + the operation, without the 'CONFIG_' prefix. + type: string # Start genetlink-legacy fixed-header: *fixed-header # End genetlink-legacy diff --git a/Documentation/netlink/genetlink.yaml b/Documentation/netlink/genetlink.yaml index 3d338c48bf21..3283bf458ff1 100644 --- a/Documentation/netlink/genetlink.yaml +++ b/Documentation/netlink/genetlink.yaml @@ -13,6 +13,11 @@ $defs: type: [ string, integer ] pattern: ^[0-9A-Za-z_]+( - 1)?$ minimum: 0 + len-or-limit: + # literal int or limit based on fixed-width type e.g. u8-min, u16-max, etc. + type: [ string, integer ] + pattern: ^[su](8|16|32|64)-(min|max)$ + minimum: 0 # Schema for specs title: Protocol @@ -26,10 +31,6 @@ properties: type: string doc: type: string - version: - description: Generic Netlink family version. Default is 1. - type: integer - minimum: 1 protocol: description: Schema compatibility level. Default is "genetlink". enum: [ genetlink ] @@ -115,13 +116,14 @@ properties: type: array items: type: object - required: [ name, type ] + required: [ name ] additionalProperties: False properties: name: type: string type: &attr-type - enum: [ unused, pad, flag, binary, u8, u16, u32, u64, s32, s64, + enum: [ unused, pad, flag, binary, + uint, sint, u8, u16, u32, u64, s32, s64, string, nest, array-nest, nest-type-value ] doc: description: Documentation of the attribute. @@ -160,13 +162,19 @@ properties: type: string min: description: Min value for an integer attribute. - type: integer + $ref: '#/$defs/len-or-limit' + max: + description: Max value for an integer attribute. + $ref: '#/$defs/len-or-limit' min-len: description: Min length for a binary attribute. $ref: '#/$defs/len-or-define' max-len: description: Max length for a string or a binary attribute. $ref: '#/$defs/len-or-define' + exact-len: + description: Exact length for a string or a binary attribute. + $ref: '#/$defs/len-or-define' sub-type: *attr-type display-hint: &display-hint description: | @@ -184,6 +192,18 @@ properties: not: required: [ name-prefix ] + # type property is only required if not in subset definition + if: + properties: + subset-of: + not: + type: string + then: + properties: + attributes: + items: + required: [ type ] + operations: description: Operations supported by the protocol. type: object @@ -244,6 +264,11 @@ properties: type: array items: enum: [ strict, dump, dump-strict ] + config-cond: + description: | + Name of the kernel config option gating the presence of + the operation, without the 'CONFIG_' prefix. + type: string do: &subop-type description: Main command handler. type: object diff --git a/Documentation/netlink/netlink-raw.yaml b/Documentation/netlink/netlink-raw.yaml index 896797876414..775cce8c548a 100644 --- a/Documentation/netlink/netlink-raw.yaml +++ b/Documentation/netlink/netlink-raw.yaml @@ -47,6 +47,12 @@ properties: max-by-define: description: Makes the number of attributes and commands be specified by a define, not an enum value. type: boolean + cmd-max-name: + description: Name of the define for the last operation in the list. + type: string + cmd-cnt-name: + description: The explicit name for constant holding the count of operations (last operation + 1). + type: string # End genetlink-c # Start genetlink-legacy kernel-policy: @@ -187,7 +193,7 @@ properties: type: array items: type: object - required: [ name, type ] + required: [ name ] additionalProperties: False properties: name: @@ -240,6 +246,9 @@ properties: max-len: description: Max length for a string or a binary attribute. $ref: '#/$defs/len-or-define' + exact-len: + description: Exact length for a string or a binary attribute. + $ref: '#/$defs/len-or-define' sub-type: *attr-type display-hint: *display-hint # Start genetlink-c @@ -261,6 +270,18 @@ properties: not: required: [ name-prefix ] + # type property is only required if not in subset definition + if: + properties: + subset-of: + not: + type: string + then: + properties: + attributes: + items: + required: [ type ] + operations: description: Operations supported by the protocol. type: object diff --git a/Documentation/netlink/specs/devlink.yaml b/Documentation/netlink/specs/devlink.yaml index 065661acb878..c6ba4889575a 100644 --- a/Documentation/netlink/specs/devlink.yaml +++ b/Documentation/netlink/specs/devlink.yaml @@ -15,6 +15,161 @@ definitions: name: ingress - name: egress + - + type: enum + name: port-type + entries: + - + name: notset + - + name: auto + - + name: eth + - + name: ib + - + type: enum + name: port-flavour + entries: + - + name: physical + - + name: cpu + - + name: dsa + - + name: pci_pf + - + name: pci_vf + - + name: virtual + - + name: unused + - + name: pci_sf + - + type: enum + name: port-fn-state + entries: + - + name: inactive + - + name: active + - + type: enum + name: port-fn-opstate + entries: + - + name: detached + - + name: attached + - + type: enum + name: port-fn-attr-cap + entries: + - + name: roce-bit + - + name: migratable-bit + - + type: enum + name: sb-threshold-type + entries: + - + name: static + - + name: dynamic + - + type: enum + name: eswitch-mode + entries: + - + name: legacy + - + name: switchdev + - + type: enum + name: eswitch-inline-mode + entries: + - + name: none + - + name: link + - + name: network + - + name: transport + - + type: enum + name: eswitch-encap-mode + entries: + - + name: none + - + name: basic + - + type: enum + name: dpipe-match-type + entries: + - + name: field-exact + - + type: enum + name: dpipe-action-type + entries: + - + name: field-modify + - + type: enum + name: dpipe-field-mapping-type + entries: + - + name: none + - + name: ifindex + - + type: enum + name: resource-unit + entries: + - + name: entry + - + type: enum + name: reload-action + entries: + - + name: driver-reinit + value: 1 + - + name: fw-activate + - + type: enum + name: param-cmode + entries: + - + name: runtime + - + name: driverinit + - + name: permanent + - + type: enum + name: flash-overwrite + entries: + - + name: settings-bit + - + name: identifiers-bit + - + type: enum + name: trap-action + entries: + - + name: drop + - + name: trap + - + name: mirror attribute-sets: - @@ -31,6 +186,17 @@ attribute-sets: - name: port-index type: u32 + - + name: port-type + type: u16 + enum: port-type + + # TODO: fill in the attributes in between + + - + name: port-split-count + type: u32 + value: 9 # TODO: fill in the attributes in between @@ -45,18 +211,224 @@ attribute-sets: name: sb-pool-index type: u16 value: 17 - - name: sb-pool-type type: u8 enum: sb-pool-type + - + name: sb-pool-size + type: u32 + - + name: sb-pool-threshold-type + type: u8 + enum: sb-threshold-type + - + name: sb-threshold + type: u32 + - + name: sb-tc-index + type: u16 + value: 22 # TODO: fill in the attributes in between - - name: sb-tc-index + name: eswitch-mode type: u16 - value: 22 + value: 25 + enum: eswitch-mode + + - + name: eswitch-inline-mode + type: u16 + enum: eswitch-inline-mode + - + name: dpipe-tables + type: nest + nested-attributes: dl-dpipe-tables + - + name: dpipe-table + type: nest + multi-attr: true + nested-attributes: dl-dpipe-table + - + name: dpipe-table-name + type: string + - + name: dpipe-table-size + type: u64 + - + name: dpipe-table-matches + type: nest + nested-attributes: dl-dpipe-table-matches + - + name: dpipe-table-actions + type: nest + nested-attributes: dl-dpipe-table-actions + - + name: dpipe-table-counters-enabled + type: u8 + - + name: dpipe-entries + type: nest + nested-attributes: dl-dpipe-entries + - + name: dpipe-entry + type: nest + multi-attr: true + nested-attributes: dl-dpipe-entry + - + name: dpipe-entry-index + type: u64 + - + name: dpipe-entry-match-values + type: nest + nested-attributes: dl-dpipe-entry-match-values + - + name: dpipe-entry-action-values + type: nest + nested-attributes: dl-dpipe-entry-action-values + - + name: dpipe-entry-counter + type: u64 + - + name: dpipe-match + type: nest + multi-attr: true + nested-attributes: dl-dpipe-match + - + name: dpipe-match-value + type: nest + multi-attr: true + nested-attributes: dl-dpipe-match-value + - + name: dpipe-match-type + type: u32 + enum: dpipe-match-type + - + name: dpipe-action + type: nest + multi-attr: true + nested-attributes: dl-dpipe-action + - + name: dpipe-action-value + type: nest + multi-attr: true + nested-attributes: dl-dpipe-action-value + - + name: dpipe-action-type + type: u32 + enum: dpipe-action-type + - + name: dpipe-value + type: binary + - + name: dpipe-value-mask + type: binary + - + name: dpipe-value-mapping + type: u32 + - + name: dpipe-headers + type: nest + nested-attributes: dl-dpipe-headers + - + name: dpipe-header + type: nest + multi-attr: true + nested-attributes: dl-dpipe-header + - + name: dpipe-header-name + type: string + - + name: dpipe-header-id + type: u32 + - + name: dpipe-header-fields + type: nest + nested-attributes: dl-dpipe-header-fields + - + name: dpipe-header-global + type: u8 + - + name: dpipe-header-index + type: u32 + - + name: dpipe-field + type: nest + multi-attr: true + nested-attributes: dl-dpipe-field + - + name: dpipe-field-name + type: string + - + name: dpipe-field-id + type: u32 + - + name: dpipe-field-bitwidth + type: u32 + - + name: dpipe-field-mapping-type + type: u32 + enum: dpipe-field-mapping-type + - + name: pad + type: pad + - + name: eswitch-encap-mode + type: u8 + value: 62 + enum: eswitch-encap-mode + - + name: resource-list + type: nest + nested-attributes: dl-resource-list + - + name: resource + type: nest + multi-attr: true + nested-attributes: dl-resource + - + name: resource-name + type: string + - + name: resource-id + type: u64 + - + name: resource-size + type: u64 + - + name: resource-size-new + type: u64 + - + name: resource-size-valid + type: u8 + - + name: resource-size-min + type: u64 + - + name: resource-size-max + type: u64 + - + name: resource-size-gran + type: u64 + - + name: resource-unit + type: u8 + enum: resource-unit + - + name: resource-occ + type: u64 + - + name: dpipe-table-resource-id + type: u64 + - + name: dpipe-table-resource-units + type: u64 + - + name: port-flavour + type: u16 + enum: port-flavour # TODO: fill in the attributes in between @@ -68,16 +440,40 @@ attribute-sets: # TODO: fill in the attributes in between - + name: param-type + type: u8 + value: 83 + + # TODO: fill in the attributes in between + + - + name: param-value-cmode + type: u8 + enum: param-cmode + value: 87 + - name: region-name type: string - value: 88 # TODO: fill in the attributes in between - + name: region-snapshot-id + type: u32 + value: 92 + + # TODO: fill in the attributes in between + + - + name: region-chunk-addr + type: u64 + value: 96 + - + name: region-chunk-len + type: u64 + - name: info-driver-name type: string - value: 98 - name: info-serial-number type: string @@ -106,6 +502,29 @@ attribute-sets: # TODO: fill in the attributes in between - + name: fmsg + type: nest + nested-attributes: dl-fmsg + value: 106 + - + name: fmsg-obj-nest-start + type: flag + - + name: fmsg-pair-nest-start + type: flag + - + name: fmsg-arr-nest-start + type: flag + - + name: fmsg-nest-end + type: flag + - + name: fmsg-obj-name + type: string + + # TODO: fill in the attributes in between + + - name: health-reporter-name type: string value: 115 @@ -113,9 +532,36 @@ attribute-sets: # TODO: fill in the attributes in between - + name: health-reporter-graceful-period + type: u64 + value: 120 + - + name: health-reporter-auto-recover + type: u8 + - + name: flash-update-file-name + type: string + - + name: flash-update-component + type: string + + # TODO: fill in the attributes in between + + - + name: port-pci-pf-number + type: u16 + value: 127 + + # TODO: fill in the attributes in between + + - name: trap-name type: string value: 130 + - + name: trap-action + type: u8 + enum: trap-action # TODO: fill in the attributes in between @@ -131,23 +577,68 @@ attribute-sets: # TODO: fill in the attributes in between - - name: trap-policer-id + name: netns-fd + type: u32 + value: 138 + - + name: netns-pid + type: u32 + - + name: netns-id type: u32 - value: 142 # TODO: fill in the attributes in between - - name: reload-action + name: health-reporter-auto-dump type: u8 - value: 153 + value: 141 + - + name: trap-policer-id + type: u32 + - + name: trap-policer-rate + type: u64 + - + name: trap-policer-burst + type: u64 + - + name: port-function + type: nest + nested-attributes: dl-port-function + + # TODO: fill in the attributes in between + + - + name: port-controller-number + type: u32 + value: 150 # TODO: fill in the attributes in between - + name: flash-update-overwrite-mask + type: bitfield32 + enum: flash-overwrite + enum-as-flags: True + value: 152 + - + name: reload-action + type: u8 + enum: reload-action + - + name: reload-actions-performed + type: bitfield32 + enum: reload-action + enum-as-flags: True + - + name: reload-limits + type: bitfield32 + enum: reload-action + enum-as-flags: True + - name: dev-stats type: nest - value: 156 nested-attributes: dl-dev-stats - name: reload-stats @@ -182,9 +673,25 @@ attribute-sets: # TODO: fill in the attributes in between - + name: port-pci-sf-number + type: u32 + value: 164 + + # TODO: fill in the attributes in between + + - + name: rate-tx-share + type: u64 + value: 166 + - + name: rate-tx-max + type: u64 + - name: rate-node-name type: string - value: 168 + - + name: rate-parent-node-name + type: string # TODO: fill in the attributes in between @@ -193,60 +700,329 @@ attribute-sets: type: u32 value: 171 + # TODO: fill in the attributes in between + + - + name: linecard-type + type: string + value: 173 + + # TODO: fill in the attributes in between + + - + name: selftests + type: nest + value: 176 + nested-attributes: dl-selftest-id + - + name: rate-tx-priority + type: u32 + - + name: rate-tx-weight + type: u32 + - + name: region-direct + type: flag + - name: dl-dev-stats subset-of: devlink attributes: - name: reload-stats - type: nest - name: remote-reload-stats - type: nest - name: dl-reload-stats subset-of: devlink attributes: - name: reload-action-info - type: nest - name: dl-reload-act-info subset-of: devlink attributes: - name: reload-action - type: u8 - name: reload-action-stats - type: nest - name: dl-reload-act-stats subset-of: devlink attributes: - name: reload-stats-entry - type: nest - name: dl-reload-stats-entry subset-of: devlink attributes: - name: reload-stats-limit - type: u8 - name: reload-stats-value - type: u32 - name: dl-info-version subset-of: devlink attributes: - name: info-version-name - type: string - name: info-version-value - type: string + - + name: dl-port-function + name-prefix: devlink-port-fn-attr- + attr-max-name: devlink-port-function-attr-max + attributes: + - + name-prefix: devlink-port-function-attr- + name: hw-addr + type: binary + value: 1 + - + name: state + type: u8 + enum: port-fn-state + - + name: opstate + type: u8 + enum: port-fn-opstate + - + name: caps + type: bitfield32 + enum: port-fn-attr-cap + enum-as-flags: True + + - + name: dl-dpipe-tables + subset-of: devlink + attributes: + - + name: dpipe-table + + - + name: dl-dpipe-table + subset-of: devlink + attributes: + - + name: dpipe-table-name + - + name: dpipe-table-size + - + name: dpipe-table-name + - + name: dpipe-table-size + - + name: dpipe-table-matches + - + name: dpipe-table-actions + - + name: dpipe-table-counters-enabled + - + name: dpipe-table-resource-id + - + name: dpipe-table-resource-units + + - + name: dl-dpipe-table-matches + subset-of: devlink + attributes: + - + name: dpipe-match + + - + name: dl-dpipe-table-actions + subset-of: devlink + attributes: + - + name: dpipe-action + + - + name: dl-dpipe-entries + subset-of: devlink + attributes: + - + name: dpipe-entry + + - + name: dl-dpipe-entry + subset-of: devlink + attributes: + - + name: dpipe-entry-index + - + name: dpipe-entry-match-values + - + name: dpipe-entry-action-values + - + name: dpipe-entry-counter + + - + name: dl-dpipe-entry-match-values + subset-of: devlink + attributes: + - + name: dpipe-match-value + + - + name: dl-dpipe-entry-action-values + subset-of: devlink + attributes: + - + name: dpipe-action-value + + - + name: dl-dpipe-match + subset-of: devlink + attributes: + - + name: dpipe-match-type + - + name: dpipe-header-id + - + name: dpipe-header-global + - + name: dpipe-header-index + - + name: dpipe-field-id + + - + name: dl-dpipe-match-value + subset-of: devlink + attributes: + - + name: dpipe-match + - + name: dpipe-value + - + name: dpipe-value-mask + - + name: dpipe-value-mapping + + - + name: dl-dpipe-action + subset-of: devlink + attributes: + - + name: dpipe-action-type + - + name: dpipe-header-id + - + name: dpipe-header-global + - + name: dpipe-header-index + - + name: dpipe-field-id + + - + name: dl-dpipe-action-value + subset-of: devlink + attributes: + - + name: dpipe-action + - + name: dpipe-value + - + name: dpipe-value-mask + - + name: dpipe-value-mapping + + - + name: dl-dpipe-headers + subset-of: devlink + attributes: + - + name: dpipe-header + + - + name: dl-dpipe-header + subset-of: devlink + attributes: + - + name: dpipe-header-name + - + name: dpipe-header-id + - + name: dpipe-header-global + - + name: dpipe-header-fields + + - + name: dl-dpipe-header-fields + subset-of: devlink + attributes: + - + name: dpipe-field + + - + name: dl-dpipe-field + subset-of: devlink + attributes: + - + name: dpipe-field-name + - + name: dpipe-field-id + - + name: dpipe-field-bitwidth + - + name: dpipe-field-mapping-type + + - + name: dl-resource + subset-of: devlink + attributes: + # - + # name: resource-list + # This is currently unsupported due to circular dependency + - + name: resource-name + - + name: resource-id + - + name: resource-size + - + name: resource-size-new + - + name: resource-size-valid + - + name: resource-size-min + - + name: resource-size-max + - + name: resource-size-gran + - + name: resource-unit + - + name: resource-occ + + - + name: dl-resource-list + subset-of: devlink + attributes: + - + name: resource + + - + name: dl-fmsg + subset-of: devlink + attributes: + - + name: fmsg-obj-nest-start + - + name: fmsg-pair-nest-start + - + name: fmsg-arr-nest-start + - + name: fmsg-nest-end + - + name: fmsg-obj-name + + - + name: dl-selftest-id + name-prefix: devlink-attr-selftest-id- + attributes: + - + name: flash + type: flag operations: enum-model: directional @@ -255,10 +1031,7 @@ operations: name: get doc: Get devlink instances. attribute-set: devlink - dont-validate: - - strict - - dump - + dont-validate: [ strict, dump ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -273,7 +1046,6 @@ operations: - bus-name - dev-name - reload-failed - - reload-action - dev-stats dump: reply: *get-reply @@ -282,9 +1054,7 @@ operations: name: port-get doc: Get devlink port instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit-port post: devlink-nl-post-doit @@ -303,16 +1073,90 @@ operations: reply: value: 3 # due to a bug, port dump returns DEVLINK_CMD_NEW attributes: *port-id-attrs + - + name: port-set + doc: Set devlink port instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - port-index + - port-type + - port-function - # TODO: fill in the operations in between + - + name: port-new + doc: Create devlink port instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - port-index + - port-flavour + - port-pci-pf-number + - port-pci-sf-number + - port-controller-number + reply: + value: 7 + attributes: *port-id-attrs + + - + name: port-del + doc: Delete devlink port instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + attributes: *port-id-attrs + + - + name: port-split + doc: Split devlink port instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - port-index + - port-split-count + + - + name: port-unsplit + doc: Unplit devlink port instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + attributes: *port-id-attrs - name: sb-get doc: Get shared buffer instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -330,15 +1174,11 @@ operations: attributes: *dev-id-attrs reply: *sb-get-reply - # TODO: fill in the operations in between - - name: sb-pool-get doc: Get shared buffer pool instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -357,15 +1197,29 @@ operations: attributes: *dev-id-attrs reply: *sb-pool-get-reply - # TODO: fill in the operations in between + - + name: sb-pool-set + doc: Set shared buffer pool instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - sb-index + - sb-pool-index + - sb-pool-threshold-type + - sb-pool-size - name: sb-port-pool-get doc: Get shared buffer port-pool combinations and threshold. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit-port post: devlink-nl-post-doit @@ -385,15 +1239,29 @@ operations: attributes: *dev-id-attrs reply: *sb-port-pool-get-reply - # TODO: fill in the operations in between + - + name: sb-port-pool-set + doc: Set shared buffer port-pool combinations and threshold. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - port-index + - sb-index + - sb-pool-index + - sb-threshold - name: sb-tc-pool-bind-get doc: Get shared buffer port-TC to pool bindings and threshold. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit-port post: devlink-nl-post-doit @@ -414,41 +1282,264 @@ operations: attributes: *dev-id-attrs reply: *sb-tc-pool-bind-get-reply - # TODO: fill in the operations in between + - + name: sb-tc-pool-bind-set + doc: Set shared buffer port-TC to pool bindings and threshold. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - port-index + - sb-index + - sb-pool-index + - sb-pool-type + - sb-tc-index + - sb-threshold + + - + name: sb-occ-snapshot + doc: Take occupancy snapshot of shared buffer. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + value: 27 + attributes: + - bus-name + - dev-name + - sb-index + + - + name: sb-occ-max-clear + doc: Clear occupancy watermarks of shared buffer. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - sb-index + + - + name: eswitch-get + doc: Get eswitch attributes. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: *dev-id-attrs + reply: + value: 29 + attributes: &eswitch-attrs + - bus-name + - dev-name + - eswitch-mode + - eswitch-inline-mode + - eswitch-encap-mode + + - + name: eswitch-set + doc: Set eswitch attributes. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: *eswitch-attrs + + - + name: dpipe-table-get + doc: Get dpipe table attributes. + attribute-set: devlink + dont-validate: [ strict ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - dpipe-table-name + reply: + value: 31 + attributes: + - bus-name + - dev-name + - dpipe-tables + + - + name: dpipe-entries-get + doc: Get dpipe entries attributes. + attribute-set: devlink + dont-validate: [ strict ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - dpipe-table-name + reply: + attributes: + - bus-name + - dev-name + - dpipe-entries + + - + name: dpipe-headers-get + doc: Get dpipe headers attributes. + attribute-set: devlink + dont-validate: [ strict ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + reply: + attributes: + - bus-name + - dev-name + - dpipe-headers + + - + name: dpipe-table-counters-set + doc: Set dpipe counter attributes. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - dpipe-table-name + - dpipe-table-counters-enabled + + - + name: resource-set + doc: Set resource attributes. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - resource-id + - resource-size + + - + name: resource-dump + doc: Get resource attributes. + attribute-set: devlink + dont-validate: [ strict ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + reply: + value: 36 + attributes: + - bus-name + - dev-name + - resource-list + + - + name: reload + doc: Reload devlink. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - reload-action + - reload-limits + - netns-pid + - netns-fd + - netns-id + reply: + attributes: + - bus-name + - dev-name + - reload-actions-performed - name: param-get doc: Get param instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit request: - value: 38 attributes: ¶m-id-attrs - bus-name - dev-name - param-name reply: ¶m-get-reply - value: 38 attributes: *param-id-attrs dump: request: attributes: *dev-id-attrs reply: *param-get-reply - # TODO: fill in the operations in between + - + name: param-set + doc: Set param instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - param-name + - param-type + # param-value-data is missing here as the type is variable + - param-value-cmode - name: region-get doc: Get region instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit-port-optional post: devlink-nl-post-doit @@ -467,16 +1558,97 @@ operations: attributes: *dev-id-attrs reply: *region-get-reply - # TODO: fill in the operations in between + - + name: region-new + doc: Create region snapshot. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port-optional + post: devlink-nl-post-doit + request: + value: 44 + attributes: ®ion-snapshot-id-attrs + - bus-name + - dev-name + - port-index + - region-name + - region-snapshot-id + reply: + value: 44 + attributes: *region-snapshot-id-attrs + + - + name: region-del + doc: Delete region snapshot. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port-optional + post: devlink-nl-post-doit + request: + attributes: *region-snapshot-id-attrs + + - + name: region-read + doc: Read region data. + attribute-set: devlink + dont-validate: [ dump-strict ] + flags: [ admin-perm ] + dump: + request: + attributes: + - bus-name + - dev-name + - port-index + - region-name + - region-snapshot-id + - region-direct + - region-chunk-addr + - region-chunk-len + reply: + value: 46 + attributes: + - bus-name + - dev-name + - port-index + - region-name + + - + name: port-param-get + doc: Get port param instances. + attribute-set: devlink + dont-validate: [ strict, dump-strict ] + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + attributes: *port-id-attrs + reply: + attributes: *port-id-attrs + dump: + reply: + attributes: *port-id-attrs + + - + name: port-param-set + doc: Set port param instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + attributes: *port-id-attrs - name: info-get doc: Get device information, like driver name, hardware and firmware versions etc. attribute-set: devlink - dont-validate: - - strict - - dump - + dont-validate: [ strict, dump ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -500,9 +1672,7 @@ operations: name: health-reporter-get doc: Get health reporter instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit-port-optional post: devlink-nl-post-doit @@ -519,15 +1689,97 @@ operations: attributes: *port-id-attrs reply: *health-reporter-get-reply - # TODO: fill in the operations in between + - + name: health-reporter-set + doc: Set health reporter instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port-optional + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - port-index + - health-reporter-name + - health-reporter-graceful-period + - health-reporter-auto-recover + - health-reporter-auto-dump + + - + name: health-reporter-recover + doc: Recover health reporter instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port-optional + post: devlink-nl-post-doit + request: + attributes: *health-reporter-id-attrs + + - + name: health-reporter-diagnose + doc: Diagnose health reporter instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port-optional + post: devlink-nl-post-doit + request: + attributes: *health-reporter-id-attrs + + - + name: health-reporter-dump-get + doc: Dump health reporter instances. + attribute-set: devlink + dont-validate: [ dump-strict ] + flags: [ admin-perm ] + dump: + request: + attributes: *health-reporter-id-attrs + reply: + value: 56 + attributes: + - fmsg + + - + name: health-reporter-dump-clear + doc: Clear dump of health reporter instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port-optional + post: devlink-nl-post-doit + request: + attributes: *health-reporter-id-attrs + + - + name: flash-update + doc: Flash update devlink instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - flash-update-file-name + - flash-update-component + - flash-update-overwrite-mask - name: trap-get doc: Get trap instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -545,15 +1797,27 @@ operations: attributes: *dev-id-attrs reply: *trap-get-reply - # TODO: fill in the operations in between + - + name: trap-set + doc: Set trap instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - trap-name + - trap-action - name: trap-group-get doc: Get trap group instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -571,15 +1835,28 @@ operations: attributes: *dev-id-attrs reply: *trap-group-get-reply - # TODO: fill in the operations in between + - + name: trap-group-set + doc: Set trap group instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - trap-group-name + - trap-action + - trap-policer-id - name: trap-policer-get doc: Get trap policer instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -597,15 +1874,41 @@ operations: attributes: *dev-id-attrs reply: *trap-policer-get-reply - # TODO: fill in the operations in between + - + name: trap-policer-set + doc: Get trap policer instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - trap-policer-id + - trap-policer-rate + - trap-policer-burst + + - + name: health-reporter-test + doc: Test health reporter instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port-optional + post: devlink-nl-post-doit + request: + value: 73 + attributes: *health-reporter-id-attrs - name: rate-get doc: Get rate instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -624,15 +1927,66 @@ operations: attributes: *dev-id-attrs reply: *rate-get-reply - # TODO: fill in the operations in between + - + name: rate-set + doc: Set rate instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - rate-node-name + - rate-tx-share + - rate-tx-max + - rate-tx-priority + - rate-tx-weight + - rate-parent-node-name + + - + name: rate-new + doc: Create rate instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - rate-node-name + - rate-tx-share + - rate-tx-max + - rate-tx-priority + - rate-tx-weight + - rate-parent-node-name + + - + name: rate-del + doc: Delete rate instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - rate-node-name - name: linecard-get doc: Get line card instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -650,16 +2004,27 @@ operations: attributes: *dev-id-attrs reply: *linecard-get-reply - # TODO: fill in the operations in between + - + name: linecard-set + doc: Set line card instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - linecard-index + - linecard-type - name: selftests-get doc: Get device selftest instances. attribute-set: devlink - dont-validate: - - strict - - dump - + dont-validate: [ strict, dump ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -671,3 +2036,18 @@ operations: attributes: *dev-id-attrs dump: reply: *selftests-get-reply + + - + name: selftests-run + doc: Run device selftest instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - selftests diff --git a/Documentation/netlink/specs/dpll.yaml b/Documentation/netlink/specs/dpll.yaml new file mode 100644 index 000000000000..cf8abe1c0550 --- /dev/null +++ b/Documentation/netlink/specs/dpll.yaml @@ -0,0 +1,510 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) + +name: dpll + +doc: DPLL subsystem. + +definitions: + - + type: enum + name: mode + doc: | + working modes a dpll can support, differentiates if and how dpll selects + one of its inputs to syntonize with it, valid values for DPLL_A_MODE + attribute + entries: + - + name: manual + doc: input can be only selected by sending a request to dpll + value: 1 + - + name: automatic + doc: highest prio input pin auto selected by dpll + render-max: true + - + type: enum + name: lock-status + doc: | + provides information of dpll device lock status, valid values for + DPLL_A_LOCK_STATUS attribute + entries: + - + name: unlocked + doc: | + dpll was not yet locked to any valid input (or forced by setting + DPLL_A_MODE to DPLL_MODE_DETACHED) + value: 1 + - + name: locked + doc: | + dpll is locked to a valid signal, but no holdover available + - + name: locked-ho-acq + doc: | + dpll is locked and holdover acquired + - + name: holdover + doc: | + dpll is in holdover state - lost a valid lock or was forced + by disconnecting all the pins (latter possible only + when dpll lock-state was already DPLL_LOCK_STATUS_LOCKED_HO_ACQ, + if dpll lock-state was not DPLL_LOCK_STATUS_LOCKED_HO_ACQ, the + dpll's lock-state shall remain DPLL_LOCK_STATUS_UNLOCKED) + render-max: true + - + type: const + name: temp-divider + value: 1000 + doc: | + temperature divider allowing userspace to calculate the + temperature as float with three digit decimal precision. + Value of (DPLL_A_TEMP / DPLL_TEMP_DIVIDER) is integer part of + temperature value. + Value of (DPLL_A_TEMP % DPLL_TEMP_DIVIDER) is fractional part of + temperature value. + - + type: enum + name: type + doc: type of dpll, valid values for DPLL_A_TYPE attribute + entries: + - + name: pps + doc: dpll produces Pulse-Per-Second signal + value: 1 + - + name: eec + doc: dpll drives the Ethernet Equipment Clock + render-max: true + - + type: enum + name: pin-type + doc: | + defines possible types of a pin, valid values for DPLL_A_PIN_TYPE + attribute + entries: + - + name: mux + doc: aggregates another layer of selectable pins + value: 1 + - + name: ext + doc: external input + - + name: synce-eth-port + doc: ethernet port PHY's recovered clock + - + name: int-oscillator + doc: device internal oscillator + - + name: gnss + doc: GNSS recovered clock + render-max: true + - + type: enum + name: pin-direction + doc: | + defines possible direction of a pin, valid values for + DPLL_A_PIN_DIRECTION attribute + entries: + - + name: input + doc: pin used as a input of a signal + value: 1 + - + name: output + doc: pin used to output the signal + render-max: true + - + type: const + name: pin-frequency-1-hz + value: 1 + - + type: const + name: pin-frequency-10-khz + value: 10000 + - + type: const + name: pin-frequency-77_5-khz + value: 77500 + - + type: const + name: pin-frequency-10-mhz + value: 10000000 + - + type: enum + name: pin-state + doc: | + defines possible states of a pin, valid values for + DPLL_A_PIN_STATE attribute + entries: + - + name: connected + doc: pin connected, active input of phase locked loop + value: 1 + - + name: disconnected + doc: pin disconnected, not considered as a valid input + - + name: selectable + doc: pin enabled for automatic input selection + render-max: true + - + type: flags + name: pin-capabilities + doc: | + defines possible capabilities of a pin, valid flags on + DPLL_A_PIN_CAPABILITIES attribute + entries: + - + name: direction-can-change + doc: pin direction can be changed + - + name: priority-can-change + doc: pin priority can be changed + - + name: state-can-change + doc: pin state can be changed + - + type: const + name: phase-offset-divider + value: 1000 + doc: | + phase offset divider allows userspace to calculate a value of + measured signal phase difference between a pin and dpll device + as a fractional value with three digit decimal precision. + Value of (DPLL_A_PHASE_OFFSET / DPLL_PHASE_OFFSET_DIVIDER) is an + integer part of a measured phase offset value. + Value of (DPLL_A_PHASE_OFFSET % DPLL_PHASE_OFFSET_DIVIDER) is a + fractional part of a measured phase offset value. + +attribute-sets: + - + name: dpll + enum-name: dpll_a + attributes: + - + name: id + type: u32 + - + name: module-name + type: string + - + name: pad + type: pad + - + name: clock-id + type: u64 + - + name: mode + type: u32 + enum: mode + - + name: mode-supported + type: u32 + enum: mode + multi-attr: true + - + name: lock-status + type: u32 + enum: lock-status + - + name: temp + type: s32 + - + name: type + type: u32 + enum: type + - + name: pin + enum-name: dpll_a_pin + attributes: + - + name: id + type: u32 + - + name: parent-id + type: u32 + - + name: module-name + type: string + - + name: pad + type: pad + - + name: clock-id + type: u64 + - + name: board-label + type: string + - + name: panel-label + type: string + - + name: package-label + type: string + - + name: type + type: u32 + enum: pin-type + - + name: direction + type: u32 + enum: pin-direction + - + name: frequency + type: u64 + - + name: frequency-supported + type: nest + multi-attr: true + nested-attributes: frequency-range + - + name: frequency-min + type: u64 + - + name: frequency-max + type: u64 + - + name: prio + type: u32 + - + name: state + type: u32 + enum: pin-state + - + name: capabilities + type: u32 + - + name: parent-device + type: nest + multi-attr: true + nested-attributes: pin-parent-device + - + name: parent-pin + type: nest + multi-attr: true + nested-attributes: pin-parent-pin + - + name: phase-adjust-min + type: s32 + - + name: phase-adjust-max + type: s32 + - + name: phase-adjust + type: s32 + - + name: phase-offset + type: s64 + - + name: pin-parent-device + subset-of: pin + attributes: + - + name: parent-id + - + name: direction + - + name: prio + - + name: state + - + name: phase-offset + - + name: pin-parent-pin + subset-of: pin + attributes: + - + name: parent-id + - + name: state + - + name: frequency-range + subset-of: pin + attributes: + - + name: frequency-min + - + name: frequency-max + +operations: + enum-name: dpll_cmd + list: + - + name: device-id-get + doc: | + Get id of dpll device that matches given attributes + attribute-set: dpll + flags: [ admin-perm ] + + do: + pre: dpll-lock-doit + post: dpll-unlock-doit + request: + attributes: + - module-name + - clock-id + - type + reply: + attributes: + - id + + - + name: device-get + doc: | + Get list of DPLL devices (dump) or attributes of a single dpll device + attribute-set: dpll + flags: [ admin-perm ] + + do: + pre: dpll-pre-doit + post: dpll-post-doit + request: + attributes: + - id + reply: &dev-attrs + attributes: + - id + - module-name + - mode + - mode-supported + - lock-status + - temp + - clock-id + - type + + dump: + pre: dpll-lock-dumpit + post: dpll-unlock-dumpit + reply: *dev-attrs + + - + name: device-set + doc: Set attributes for a DPLL device + attribute-set: dpll + flags: [ admin-perm ] + + do: + pre: dpll-pre-doit + post: dpll-post-doit + request: + attributes: + - id + - + name: device-create-ntf + doc: Notification about device appearing + notify: device-get + mcgrp: monitor + - + name: device-delete-ntf + doc: Notification about device disappearing + notify: device-get + mcgrp: monitor + - + name: device-change-ntf + doc: Notification about device configuration being changed + notify: device-get + mcgrp: monitor + - + name: pin-id-get + doc: | + Get id of a pin that matches given attributes + attribute-set: pin + flags: [ admin-perm ] + + do: + pre: dpll-lock-doit + post: dpll-unlock-doit + request: + attributes: + - module-name + - clock-id + - board-label + - panel-label + - package-label + - type + reply: + attributes: + - id + + - + name: pin-get + doc: | + Get list of pins and its attributes. + - dump request without any attributes given - list all the pins in the + system + - dump request with target dpll - list all the pins registered with + a given dpll device + - do request with target dpll and target pin - single pin attributes + attribute-set: pin + flags: [ admin-perm ] + + do: + pre: dpll-pin-pre-doit + post: dpll-pin-post-doit + request: + attributes: + - id + reply: &pin-attrs + attributes: + - id + - board-label + - panel-label + - package-label + - type + - frequency + - frequency-supported + - capabilities + - parent-device + - parent-pin + - phase-adjust-min + - phase-adjust-max + - phase-adjust + + dump: + pre: dpll-lock-dumpit + post: dpll-unlock-dumpit + request: + attributes: + - id + reply: *pin-attrs + + - + name: pin-set + doc: Set attributes of a target pin + attribute-set: pin + flags: [ admin-perm ] + + do: + pre: dpll-pin-pre-doit + post: dpll-pin-post-doit + request: + attributes: + - id + - frequency + - direction + - prio + - state + - parent-device + - parent-pin + - phase-adjust + - + name: pin-create-ntf + doc: Notification about pin appearing + notify: pin-get + mcgrp: monitor + - + name: pin-delete-ntf + doc: Notification about pin disappearing + notify: pin-get + mcgrp: monitor + - + name: pin-change-ntf + doc: Notification about pin configuration being changed + notify: pin-get + mcgrp: monitor + +mcast-groups: + list: + - + name: monitor diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml index 837b565577ca..5c7a65b009b4 100644 --- a/Documentation/netlink/specs/ethtool.yaml +++ b/Documentation/netlink/specs/ethtool.yaml @@ -818,13 +818,10 @@ attribute-sets: attributes: - name: hist-bkt-low - type: u32 - name: hist-bkt-hi - type: u32 - name: hist-val - type: u64 - name: stats attributes: diff --git a/Documentation/netlink/specs/handshake.yaml b/Documentation/netlink/specs/handshake.yaml index 6d89e30f5fd5..b934cc513e3d 100644 --- a/Documentation/netlink/specs/handshake.yaml +++ b/Documentation/netlink/specs/handshake.yaml @@ -34,16 +34,16 @@ attribute-sets: attributes: - name: cert - type: u32 + type: s32 - name: privkey - type: u32 + type: s32 - name: accept attributes: - name: sockfd - type: u32 + type: s32 - name: handler-class type: u32 @@ -79,7 +79,7 @@ attribute-sets: type: u32 - name: sockfd - type: u32 + type: s32 - name: remote-auth type: u32 diff --git a/Documentation/netlink/specs/mptcp.yaml b/Documentation/netlink/specs/mptcp.yaml new file mode 100644 index 000000000000..49f90cfb4698 --- /dev/null +++ b/Documentation/netlink/specs/mptcp.yaml @@ -0,0 +1,393 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) + +name: mptcp_pm +protocol: genetlink-legacy +doc: Multipath TCP. + +c-family-name: mptcp-pm-name +c-version-name: mptcp-pm-ver +max-by-define: true +kernel-policy: per-op +cmd-cnt-name: --mptcp-pm-cmd-after-last + +definitions: + - + type: enum + name: event-type + enum-name: mptcp-event-type + name-prefix: mptcp-event- + entries: + - + name: unspec + doc: unused event + - + name: created + doc: + token, family, saddr4 | saddr6, daddr4 | daddr6, sport, dport + A new MPTCP connection has been created. It is the good time to + allocate memory and send ADD_ADDR if needed. Depending on the + traffic-patterns it can take a long time until the + MPTCP_EVENT_ESTABLISHED is sent. + - + name: established + doc: + token, family, saddr4 | saddr6, daddr4 | daddr6, sport, dport + A MPTCP connection is established (can start new subflows). + - + name: closed + doc: + token + A MPTCP connection has stopped. + - + name: announced + value: 6 + doc: + token, rem_id, family, daddr4 | daddr6 [, dport] + A new address has been announced by the peer. + - + name: removed + doc: + token, rem_id + An address has been lost by the peer. + - + name: sub-established + value: 10 + doc: + token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 | daddr6, sport, + dport, backup, if_idx [, error] + A new subflow has been established. 'error' should not be set. + - + name: sub-closed + doc: + token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 | daddr6, sport, + dport, backup, if_idx [, error] + A subflow has been closed. An error (copy of sk_err) could be set if an + error has been detected for this subflow. + - + name: sub-priority + value: 13 + doc: + token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 | daddr6, sport, + dport, backup, if_idx [, error] + The priority of a subflow has changed. 'error' should not be set. + - + name: listener-created + value: 15 + doc: + family, sport, saddr4 | saddr6 + A new PM listener is created. + - + name: listener-closed + doc: + family, sport, saddr4 | saddr6 + A PM listener is closed. + +attribute-sets: + - + name: address + name-prefix: mptcp-pm-addr-attr- + attributes: + - + name: unspec + type: unused + value: 0 + - + name: family + type: u16 + - + name: id + type: u8 + - + name: addr4 + type: u32 + byte-order: big-endian + - + name: addr6 + type: binary + checks: + exact-len: 16 + - + name: port + type: u16 + byte-order: big-endian + - + name: flags + type: u32 + - + name: if-idx + type: s32 + - + name: subflow-attribute + name-prefix: mptcp-subflow-attr- + attributes: + - + name: unspec + type: unused + value: 0 + - + name: token-rem + type: u32 + - + name: token-loc + type: u32 + - + name: relwrite-seq + type: u32 + - + name: map-seq + type: u64 + - + name: map-sfseq + type: u32 + - + name: ssn-offset + type: u32 + - + name: map-datalen + type: u16 + - + name: flags + type: u32 + - + name: id-rem + type: u8 + - + name: id-loc + type: u8 + - + name: pad + type: pad + - + name: endpoint + name-prefix: mptcp-pm-endpoint- + attributes: + - + name: addr + type: nest + nested-attributes: address + - + name: attr + name-prefix: mptcp-pm-attr- + attr-cnt-name: --mptcp-attr-after-last + attributes: + - + name: unspec + type: unused + value: 0 + - + name: addr + type: nest + nested-attributes: address + - + name: rcv-add-addrs + type: u32 + - + name: subflows + type: u32 + - + name: token + type: u32 + - + name: loc-id + type: u8 + - + name: addr-remote + type: nest + nested-attributes: address + - + name: event-attr + enum-name: mptcp-event-attr + name-prefix: mptcp-attr- + attributes: + - + name: unspec + type: unused + value: 0 + - + name: token + type: u32 + - + name: family + type: u16 + - + name: loc-id + type: u8 + - + name: rem-id + type: u8 + - + name: saddr4 + type: u32 + byte-order: big-endian + - + name: saddr6 + type: binary + checks: + min-len: 16 + - + name: daddr4 + type: u32 + byte-order: big-endian + - + name: daddr6 + type: binary + checks: + min-len: 16 + - + name: sport + type: u16 + byte-order: big-endian + - + name: dport + type: u16 + byte-order: big-endian + - + name: backup + type: u8 + - + name: error + type: u8 + - + name: flags + type: u16 + - + name: timeout + type: u32 + - + name: if_idx + type: u32 + - + name: reset-reason + type: u32 + - + name: reset-flags + type: u32 + - + name: server-side + type: u8 + +operations: + list: + - + name: unspec + doc: unused + value: 0 + - + name: add-addr + doc: Add endpoint + attribute-set: endpoint + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: &add-addr-attrs + request: + attributes: + - addr + - + name: del-addr + doc: Delete endpoint + attribute-set: endpoint + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: *add-addr-attrs + - + name: get-addr + doc: Get endpoint information + attribute-set: endpoint + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: &get-addr-attrs + request: + attributes: + - addr + reply: + attributes: + - addr + dump: + reply: + attributes: + - addr + - + name: flush-addrs + doc: flush addresses + attribute-set: endpoint + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: *add-addr-attrs + - + name: set-limits + doc: Set protocol limits + attribute-set: attr + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: &mptcp-limits + request: + attributes: + - rcv-add-addrs + - subflows + - + name: get-limits + doc: Get protocol limits + attribute-set: attr + dont-validate: [ strict ] + do: &mptcp-get-limits + request: + attributes: + - rcv-add-addrs + - subflows + reply: + attributes: + - rcv-add-addrs + - subflows + - + name: set-flags + doc: Change endpoint flags + attribute-set: attr + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: &mptcp-set-flags + request: + attributes: + - addr + - token + - addr-remote + - + name: announce + doc: announce new sf + attribute-set: attr + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: &announce-add + request: + attributes: + - addr + - token + - + name: remove + doc: announce removal + attribute-set: attr + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: + request: + attributes: + - token + - loc-id + - + name: subflow-create + doc: todo + attribute-set: attr + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: &sf-create + request: + attributes: + - addr + - token + - addr-remote + - + name: subflow-destroy + doc: todo + attribute-set: attr + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: *sf-create diff --git a/Documentation/netlink/specs/netdev.yaml b/Documentation/netlink/specs/netdev.yaml index 1c7284fd535b..14511b13f305 100644 --- a/Documentation/netlink/specs/netdev.yaml +++ b/Documentation/netlink/specs/netdev.yaml @@ -42,6 +42,19 @@ definitions: doc: This feature informs if netdev implements non-linear XDP buffer support in ndo_xdp_xmit callback. + - + type: flags + name: xdp-rx-metadata + render-max: true + entries: + - + name: timestamp + doc: + Device is capable of exposing receive HW timestamp via bpf_xdp_metadata_rx_timestamp(). + - + name: hash + doc: + Device is capable of exposing receive packet hash via bpf_xdp_metadata_rx_hash(). attribute-sets: - @@ -61,13 +74,18 @@ attribute-sets: doc: Bitmask of enabled xdp-features. type: u64 enum: xdp-act - enum-as-flags: true - name: xdp-zc-max-segs doc: max fragment count supported by ZC driver type: u32 checks: min: 1 + - + name: xdp-rx-metadata-features + doc: Bitmask of supported XDP receive metadata features. + See Documentation/networking/xdp-rx-metadata.rst for more details. + type: u64 + enum: xdp-rx-metadata operations: list: @@ -84,6 +102,7 @@ operations: - ifindex - xdp-features - xdp-zc-max-segs + - xdp-rx-metadata-features dump: reply: *dev-all - diff --git a/Documentation/networking/device_drivers/appletalk/cops.rst b/Documentation/networking/device_drivers/appletalk/cops.rst deleted file mode 100644 index 964ba80599a9..000000000000 --- a/Documentation/networking/device_drivers/appletalk/cops.rst +++ /dev/null @@ -1,80 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -======================================== -The COPS LocalTalk Linux driver (cops.c) -======================================== - -By Jay Schulist <jschlst@samba.org> - -This driver has two modes and they are: Dayna mode and Tangent mode. -Each mode corresponds with the type of card. It has been found -that there are 2 main types of cards and all other cards are -the same and just have different names or only have minor differences -such as more IO ports. As this driver is tested it will -become more clear exactly what cards are supported. - -Right now these cards are known to work with the COPS driver. The -LT-200 cards work in a somewhat more limited capacity than the -DL200 cards, which work very well and are in use by many people. - -TANGENT driver mode: - - Tangent ATB-II, Novell NL-1000, Daystar Digital LT-200 - -DAYNA driver mode: - - Dayna DL2000/DaynaTalk PC (Half Length), COPS LT-95, - - Farallon PhoneNET PC III, Farallon PhoneNET PC II - -Other cards possibly supported mode unknown though: - - Dayna DL2000 (Full length) - -The COPS driver defaults to using Dayna mode. To change the driver's -mode if you built a driver with dual support use board_type=1 or -board_type=2 for Dayna or Tangent with insmod. - -Operation/loading of the driver -=============================== - -Use modprobe like this: /sbin/modprobe cops.o (IO #) (IRQ #) -If you do not specify any options the driver will try and use the IO = 0x240, -IRQ = 5. As of right now I would only use IRQ 5 for the card, if autoprobing. - -To load multiple COPS driver Localtalk cards you can do one of the following:: - - insmod cops io=0x240 irq=5 - insmod -o cops2 cops io=0x260 irq=3 - -Or in lilo.conf put something like this:: - - append="ether=5,0x240,lt0 ether=3,0x260,lt1" - -Then bring up the interface with ifconfig. It will look something like this:: - - lt0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-F7-00-00-00-00-00-00-00-00 - inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 - UP BROADCAST RUNNING NOARP MULTICAST MTU:600 Metric:1 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 coll:0 - -Netatalk Configuration -====================== - -You will need to configure atalkd with something like the following to make -it work with the cops.c driver. - -* For single LTalk card use:: - - dummy -seed -phase 2 -net 2000 -addr 2000.10 -zone "1033" - lt0 -seed -phase 1 -net 1000 -addr 1000.50 -zone "1033" - -* For multiple cards, Ethernet and LocalTalk:: - - eth0 -seed -phase 2 -net 3000 -addr 3000.20 -zone "1033" - lt0 -seed -phase 1 -net 1000 -addr 1000.50 -zone "1033" - -* For multiple LocalTalk cards, and an Ethernet card. - -* Order seems to matter here, Ethernet last:: - - lt0 -seed -phase 1 -net 1000 -addr 1000.10 -zone "LocalTalk1" - lt1 -seed -phase 1 -net 2000 -addr 2000.20 -zone "LocalTalk2" - eth0 -seed -phase 2 -net 3000 -addr 3000.30 -zone "EtherTalk" diff --git a/Documentation/networking/device_drivers/appletalk/index.rst b/Documentation/networking/device_drivers/appletalk/index.rst deleted file mode 100644 index c196baeb0856..000000000000 --- a/Documentation/networking/device_drivers/appletalk/index.rst +++ /dev/null @@ -1,18 +0,0 @@ -.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) - -AppleTalk Device Drivers -======================== - -Contents: - -.. toctree:: - :maxdepth: 2 - - cops - -.. only:: subproject and html - - Indices - ======= - - * :ref:`genindex` diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst index 9827e816084b..43de285b8a92 100644 --- a/Documentation/networking/device_drivers/ethernet/index.rst +++ b/Documentation/networking/device_drivers/ethernet/index.rst @@ -32,6 +32,7 @@ Contents: intel/e1000 intel/e1000e intel/fm10k + intel/idpf intel/igb intel/igbvf intel/ixgbe diff --git a/Documentation/networking/device_drivers/ethernet/intel/idpf.rst b/Documentation/networking/device_drivers/ethernet/intel/idpf.rst new file mode 100644 index 000000000000..adb16e2abd21 --- /dev/null +++ b/Documentation/networking/device_drivers/ethernet/intel/idpf.rst @@ -0,0 +1,160 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +========================================================================== +idpf Linux* Base Driver for the Intel(R) Infrastructure Data Path Function +========================================================================== + +Intel idpf Linux driver. +Copyright(C) 2023 Intel Corporation. + +.. contents:: + +The idpf driver serves as both the Physical Function (PF) and Virtual Function +(VF) driver for the Intel(R) Infrastructure Data Path Function. + +Driver information can be obtained using ethtool, lspci, and ip. + +For questions related to hardware requirements, refer to the documentation +supplied with your Intel adapter. All hardware requirements listed apply to use +with Linux. + + +Identifying Your Adapter +======================== +For information on how to identify your adapter, and for the latest Intel +network drivers, refer to the Intel Support website: +http://www.intel.com/support + + +Additional Features and Configurations +====================================== + +ethtool +------- +The driver utilizes the ethtool interface for driver configuration and +diagnostics, as well as displaying statistical information. The latest ethtool +version is required for this functionality. If you don't have one yet, you can +obtain it at: +https://kernel.org/pub/software/network/ethtool/ + + +Viewing Link Messages +--------------------- +Link messages will not be displayed to the console if the distribution is +restricting system messages. In order to see network driver link messages on +your console, set dmesg to eight by entering the following:: + + # dmesg -n 8 + +.. note:: + This setting is not saved across reboots. + + +Jumbo Frames +------------ +Jumbo Frames support is enabled by changing the Maximum Transmission Unit (MTU) +to a value larger than the default value of 1500. + +Use the ip command to increase the MTU size. For example, enter the following +where <ethX> is the interface number:: + + # ip link set mtu 9000 dev <ethX> + # ip link set up dev <ethX> + +.. note:: + The maximum MTU setting for jumbo frames is 9706. This corresponds to the + maximum jumbo frame size of 9728 bytes. + +.. note:: + This driver will attempt to use multiple page sized buffers to receive + each jumbo packet. This should help to avoid buffer starvation issues when + allocating receive packets. + +.. note:: + Packet loss may have a greater impact on throughput when you use jumbo + frames. If you observe a drop in performance after enabling jumbo frames, + enabling flow control may mitigate the issue. + + +Performance Optimization +======================== +Driver defaults are meant to fit a wide variety of workloads, but if further +optimization is required, we recommend experimenting with the following +settings. + + +Interrupt Rate Limiting +----------------------- +This driver supports an adaptive interrupt throttle rate (ITR) mechanism that +is tuned for general workloads. The user can customize the interrupt rate +control for specific workloads, via ethtool, adjusting the number of +microseconds between interrupts. + +To set the interrupt rate manually, you must disable adaptive mode:: + + # ethtool -C <ethX> adaptive-rx off adaptive-tx off + +For lower CPU utilization: + - Disable adaptive ITR and lower Rx and Tx interrupts. The examples below + affect every queue of the specified interface. + + - Setting rx-usecs and tx-usecs to 80 will limit interrupts to about + 12,500 interrupts per second per queue:: + + # ethtool -C <ethX> adaptive-rx off adaptive-tx off rx-usecs 80 + tx-usecs 80 + +For reduced latency: + - Disable adaptive ITR and ITR by setting rx-usecs and tx-usecs to 0 + using ethtool:: + + # ethtool -C <ethX> adaptive-rx off adaptive-tx off rx-usecs 0 + tx-usecs 0 + +Per-queue interrupt rate settings: + - The following examples are for queues 1 and 3, but you can adjust other + queues. + + - To disable Rx adaptive ITR and set static Rx ITR to 10 microseconds or + about 100,000 interrupts/second, for queues 1 and 3:: + + # ethtool --per-queue <ethX> queue_mask 0xa --coalesce adaptive-rx off + rx-usecs 10 + + - To show the current coalesce settings for queues 1 and 3:: + + # ethtool --per-queue <ethX> queue_mask 0xa --show-coalesce + + + +Virtualized Environments +------------------------ +In addition to the other suggestions in this section, the following may be +helpful to optimize performance in VMs. + + - Using the appropriate mechanism (vcpupin) in the VM, pin the CPUs to + individual LCPUs, making sure to use a set of CPUs included in the + device's local_cpulist: /sys/class/net/<ethX>/device/local_cpulist. + + - Configure as many Rx/Tx queues in the VM as available. (See the idpf driver + documentation for the number of queues supported.) For example:: + + # ethtool -L <virt_interface> rx <max> tx <max> + + +Support +======= +For general information, go to the Intel support website at: +http://www.intel.com/support/ + +If an issue is identified with the released source code on a supported kernel +with a supported adapter, email the specific information related to the issue +to intel-wired-lan@lists.osuosl.org. + + +Trademarks +========== +Intel is a trademark or registered trademark of Intel Corporation or its +subsidiaries in the United States and/or other countries. + +* Other names and brands may be claimed as the property of others. diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst index 0a42c3395ffa..20d3b7e87049 100644 --- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst +++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst @@ -67,7 +67,7 @@ Enabling the driver and kconfig options | Enables :ref:`IPSec XFRM cryptography-offload acceleration <xfrm_device>`. -**CONFIG_MLX5_EN_MACSEC=(y/n)** +**CONFIG_MLX5_MACSEC=(y/n)** | Build support for MACsec cryptography-offload acceleration in the NIC. diff --git a/Documentation/networking/device_drivers/index.rst b/Documentation/networking/device_drivers/index.rst index 601eacaf12f3..2f0285a5bc80 100644 --- a/Documentation/networking/device_drivers/index.rst +++ b/Documentation/networking/device_drivers/index.rst @@ -8,7 +8,6 @@ Contents: .. toctree:: :maxdepth: 2 - appletalk/index atm/index cable/index can/index diff --git a/Documentation/networking/devlink/i40e.rst b/Documentation/networking/devlink/i40e.rst new file mode 100644 index 000000000000..d3cb5bb5197e --- /dev/null +++ b/Documentation/networking/devlink/i40e.rst @@ -0,0 +1,59 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +i40e devlink support +==================== + +This document describes the devlink features implemented by the ``i40e`` +device driver. + +Info versions +============= + +The ``i40e`` driver reports the following versions + +.. list-table:: devlink info versions implemented + :widths: 5 5 5 90 + + * - Name + - Type + - Example + - Description + * - ``board.id`` + - fixed + - K15190-000 + - The Product Board Assembly (PBA) identifier of the board. + * - ``fw.mgmt`` + - running + - 9.130 + - 2-digit version number of the management firmware that controls the + PHY, link, etc. + * - ``fw.mgmt.api`` + - running + - 1.15 + - 2-digit version number of the API exported over the AdminQ by the + management firmware. Used by the driver to identify what commands + are supported. + * - ``fw.mgmt.build`` + - running + - 73618 + - Build number of the source for the management firmware. + * - ``fw.undi`` + - running + - 1.3429.0 + - Version of the Option ROM containing the UEFI driver. The version is + reported in ``major.minor.patch`` format. The major version is + incremented whenever a major breaking change occurs, or when the + minor version would overflow. The minor version is incremented for + non-breaking changes and reset to 1 when the major version is + incremented. The patch version is normally 0 but is incremented when + a fix is delivered as a patch against an older base Option ROM. + * - ``fw.psid.api`` + - running + - 9.30 + - Version defining the format of the flash contents. + * - ``fw.bundle_id`` + - running + - 0x8000e5f3 + - Unique identifier of the firmware image file that was loaded onto + the device. Also referred to as the EETRACK identifier of the NVM. diff --git a/Documentation/networking/devlink/index.rst b/Documentation/networking/devlink/index.rst index b49749e2b9a6..e14d7a701b72 100644 --- a/Documentation/networking/devlink/index.rst +++ b/Documentation/networking/devlink/index.rst @@ -18,6 +18,34 @@ netlink commands. Drivers are encouraged to use the devlink instance lock for their own needs. +Drivers need to be cautious when taking devlink instance lock and +taking RTNL lock at the same time. Devlink instance lock needs to be taken +first, only after that RTNL lock could be taken. + +Nested instances +---------------- + +Some objects, like linecards or port functions, could have another +devlink instances created underneath. In that case, drivers should make +sure to respect following rules: + + - Lock ordering should be maintained. If driver needs to take instance + lock of both nested and parent instances at the same time, devlink + instance lock of the parent instance should be taken first, only then + instance lock of the nested instance could be taken. + - Driver should use object-specific helpers to setup the + nested relationship: + + - ``devl_nested_devlink_set()`` - called to setup devlink -> nested + devlink relationship (could be user for multiple nested instances. + - ``devl_port_fn_devlink_set()`` - called to setup port function -> + nested devlink relationship. + - ``devlink_linecard_nested_dl_set()`` - called to setup linecard -> + nested devlink relationship. + +The nested devlink info is exposed to the userspace over object-specific +attributes of devlink netlink. + Interface documentation ----------------------- @@ -52,6 +80,7 @@ parameters, info versions, and other features it supports. bnxt etas_es58x hns3 + i40e ionic ice mlx4 diff --git a/Documentation/networking/dsa/b53.rst b/Documentation/networking/dsa/b53.rst index b41637cdb82b..1cb3ff648f88 100644 --- a/Documentation/networking/dsa/b53.rst +++ b/Documentation/networking/dsa/b53.rst @@ -52,7 +52,7 @@ VLAN programming would basically change the CPU port's default PVID and make it untagged, undesirable. In difference to the configuration described in :ref:`dsa-vlan-configuration` -the default VLAN 1 has to be removed from the slave interface configuration in +the default VLAN 1 has to be removed from the user interface configuration in single port and gateway configuration, while there is no need to add an extra VLAN configuration in the bridge showcase. @@ -68,13 +68,13 @@ By default packages are tagged with vid 1: ip link add link eth0 name eth0.2 type vlan id 2 ip link add link eth0 name eth0.3 type vlan id 3 - # The master interface needs to be brought up before the slave ports. + # The conduit interface needs to be brought up before the user ports. ip link set eth0 up ip link set eth0.1 up ip link set eth0.2 up ip link set eth0.3 up - # bring up the slave interfaces + # bring up the user interfaces ip link set wan up ip link set lan1 up ip link set lan2 up @@ -113,11 +113,11 @@ bridge # tag traffic on CPU port ip link add link eth0 name eth0.1 type vlan id 1 - # The master interface needs to be brought up before the slave ports. + # The conduit interface needs to be brought up before the user ports. ip link set eth0 up ip link set eth0.1 up - # bring up the slave interfaces + # bring up the user interfaces ip link set wan up ip link set lan1 up ip link set lan2 up @@ -149,12 +149,12 @@ gateway ip link add link eth0 name eth0.1 type vlan id 1 ip link add link eth0 name eth0.2 type vlan id 2 - # The master interface needs to be brought up before the slave ports. + # The conduit interface needs to be brought up before the user ports. ip link set eth0 up ip link set eth0.1 up ip link set eth0.2 up - # bring up the slave interfaces + # bring up the user interfaces ip link set wan up ip link set lan1 up ip link set lan2 up diff --git a/Documentation/networking/dsa/bcm_sf2.rst b/Documentation/networking/dsa/bcm_sf2.rst index dee234039e1e..d2571435696f 100644 --- a/Documentation/networking/dsa/bcm_sf2.rst +++ b/Documentation/networking/dsa/bcm_sf2.rst @@ -67,7 +67,7 @@ MDIO indirect accesses ---------------------- Due to a limitation in how Broadcom switches have been designed, external -Broadcom switches connected to a SF2 require the use of the DSA slave MDIO bus +Broadcom switches connected to a SF2 require the use of the DSA user MDIO bus in order to properly configure them. By default, the SF2 pseudo-PHY address, and an external switch pseudo-PHY address will both be snooping for incoming MDIO transactions, since they are at the same address (30), resulting in some kind of diff --git a/Documentation/networking/dsa/configuration.rst b/Documentation/networking/dsa/configuration.rst index d2934c40f0f1..6cc4ded3cc23 100644 --- a/Documentation/networking/dsa/configuration.rst +++ b/Documentation/networking/dsa/configuration.rst @@ -31,38 +31,38 @@ at https://www.kernel.org/pub/linux/utils/net/iproute2/ Through DSA every port of a switch is handled like a normal linux Ethernet interface. The CPU port is the switch port connected to an Ethernet MAC chip. -The corresponding linux Ethernet interface is called the master interface. -All other corresponding linux interfaces are called slave interfaces. +The corresponding linux Ethernet interface is called the conduit interface. +All other corresponding linux interfaces are called user interfaces. -The slave interfaces depend on the master interface being up in order for them -to send or receive traffic. Prior to kernel v5.12, the state of the master +The user interfaces depend on the conduit interface being up in order for them +to send or receive traffic. Prior to kernel v5.12, the state of the conduit interface had to be managed explicitly by the user. Starting with kernel v5.12, the behavior is as follows: -- when a DSA slave interface is brought up, the master interface is +- when a DSA user interface is brought up, the conduit interface is automatically brought up. -- when the master interface is brought down, all DSA slave interfaces are +- when the conduit interface is brought down, all DSA user interfaces are automatically brought down. In this documentation the following Ethernet interfaces are used: *eth0* - the master interface + the conduit interface *eth1* - another master interface + another conduit interface *lan1* - a slave interface + a user interface *lan2* - another slave interface + another user interface *lan3* - a third slave interface + a third user interface *wan* - A slave interface dedicated for upstream traffic + A user interface dedicated for upstream traffic Further Ethernet interfaces can be configured similar. The configured IPs and networks are: @@ -96,11 +96,11 @@ without using a VLAN based configuration. ip addr add 192.0.2.5/30 dev lan2 ip addr add 192.0.2.9/30 dev lan3 - # For kernels earlier than v5.12, the master interface needs to be - # brought up manually before the slave ports. + # For kernels earlier than v5.12, the conduit interface needs to be + # brought up manually before the user ports. ip link set eth0 up - # bring up the slave interfaces + # bring up the user interfaces ip link set lan1 up ip link set lan2 up ip link set lan3 up @@ -108,11 +108,11 @@ without using a VLAN based configuration. *bridge* .. code-block:: sh - # For kernels earlier than v5.12, the master interface needs to be - # brought up manually before the slave ports. + # For kernels earlier than v5.12, the conduit interface needs to be + # brought up manually before the user ports. ip link set eth0 up - # bring up the slave interfaces + # bring up the user interfaces ip link set lan1 up ip link set lan2 up ip link set lan3 up @@ -134,11 +134,11 @@ without using a VLAN based configuration. *gateway* .. code-block:: sh - # For kernels earlier than v5.12, the master interface needs to be - # brought up manually before the slave ports. + # For kernels earlier than v5.12, the conduit interface needs to be + # brought up manually before the user ports. ip link set eth0 up - # bring up the slave interfaces + # bring up the user interfaces ip link set wan up ip link set lan1 up ip link set lan2 up @@ -178,14 +178,14 @@ configuration. ip link add link eth0 name eth0.2 type vlan id 2 ip link add link eth0 name eth0.3 type vlan id 3 - # For kernels earlier than v5.12, the master interface needs to be - # brought up manually before the slave ports. + # For kernels earlier than v5.12, the conduit interface needs to be + # brought up manually before the user ports. ip link set eth0 up ip link set eth0.1 up ip link set eth0.2 up ip link set eth0.3 up - # bring up the slave interfaces + # bring up the user interfaces ip link set lan1 up ip link set lan2 up ip link set lan3 up @@ -221,12 +221,12 @@ configuration. # tag traffic on CPU port ip link add link eth0 name eth0.1 type vlan id 1 - # For kernels earlier than v5.12, the master interface needs to be - # brought up manually before the slave ports. + # For kernels earlier than v5.12, the conduit interface needs to be + # brought up manually before the user ports. ip link set eth0 up ip link set eth0.1 up - # bring up the slave interfaces + # bring up the user interfaces ip link set lan1 up ip link set lan2 up ip link set lan3 up @@ -261,13 +261,13 @@ configuration. ip link add link eth0 name eth0.1 type vlan id 1 ip link add link eth0 name eth0.2 type vlan id 2 - # For kernels earlier than v5.12, the master interface needs to be - # brought up manually before the slave ports. + # For kernels earlier than v5.12, the conduit interface needs to be + # brought up manually before the user ports. ip link set eth0 up ip link set eth0.1 up ip link set eth0.2 up - # bring up the slave interfaces + # bring up the user interfaces ip link set wan up ip link set lan1 up ip link set lan2 up @@ -380,22 +380,22 @@ affinities according to the available CPU ports. Secondly, it is possible to perform load balancing between CPU ports on a per packet basis, rather than statically assigning user ports to CPU ports. -This can be achieved by placing the DSA masters under a LAG interface (bonding +This can be achieved by placing the DSA conduits under a LAG interface (bonding or team). DSA monitors this operation and creates a mirror of this software LAG -on the CPU ports facing the physical DSA masters that constitute the LAG slave +on the CPU ports facing the physical DSA conduits that constitute the LAG slave devices. To make use of multiple CPU ports, the firmware (device tree) description of -the switch must mark all the links between CPU ports and their DSA masters +the switch must mark all the links between CPU ports and their DSA conduits using the ``ethernet`` reference/phandle. At startup, only a single CPU port -and DSA master will be used - the numerically first port from the firmware +and DSA conduit will be used - the numerically first port from the firmware description which has an ``ethernet`` property. It is up to the user to -configure the system for the switch to use other masters. +configure the system for the switch to use other conduits. DSA uses the ``rtnl_link_ops`` mechanism (with a "dsa" ``kind``) to allow -changing the DSA master of a user port. The ``IFLA_DSA_MASTER`` u32 netlink -attribute contains the ifindex of the master device that handles each slave -device. The DSA master must be a valid candidate based on firmware node +changing the DSA conduit of a user port. The ``IFLA_DSA_CONDUIT`` u32 netlink +attribute contains the ifindex of the conduit device that handles each user +device. The DSA conduit must be a valid candidate based on firmware node information, or a LAG interface which contains only slaves which are valid candidates. @@ -403,7 +403,7 @@ Using iproute2, the following manipulations are possible: .. code-block:: sh - # See the DSA master in current use + # See the DSA conduit in current use ip -d link show dev swp0 (...) dsa master eth0 @@ -414,7 +414,7 @@ Using iproute2, the following manipulations are possible: ip link set swp2 type dsa master eth1 ip link set swp3 type dsa master eth0 - # CPU ports in LAG, using explicit assignment of the DSA master + # CPU ports in LAG, using explicit assignment of the DSA conduit ip link add bond0 type bond mode balance-xor && ip link set bond0 up ip link set eth1 down && ip link set eth1 master bond0 ip link set swp0 type dsa master bond0 @@ -426,7 +426,7 @@ Using iproute2, the following manipulations are possible: (...) dsa master bond0 - # CPU ports in LAG, relying on implicit migration of the DSA master + # CPU ports in LAG, relying on implicit migration of the DSA conduit ip link add bond0 type bond mode balance-xor && ip link set bond0 up ip link set eth0 down && ip link set eth0 master bond0 ip link set eth1 down && ip link set eth1 master bond0 @@ -435,24 +435,24 @@ Using iproute2, the following manipulations are possible: dsa master bond0 Notice that in the case of CPU ports under a LAG, the use of the -``IFLA_DSA_MASTER`` netlink attribute is not strictly needed, but rather, DSA -reacts to the ``IFLA_MASTER`` attribute change of its present master (``eth0``) +``IFLA_DSA_CONDUIT`` netlink attribute is not strictly needed, but rather, DSA +reacts to the ``IFLA_MASTER`` attribute change of its present conduit (``eth0``) and migrates all user ports to the new upper of ``eth0``, ``bond0``. Similarly, when ``bond0`` is destroyed using ``RTM_DELLINK``, DSA migrates the user ports -that were assigned to this interface to the first physical DSA master which is +that were assigned to this interface to the first physical DSA conduit which is eligible, based on the firmware description (it effectively reverts to the startup configuration). In a setup with more than 2 physical CPU ports, it is therefore possible to mix -static user to CPU port assignment with LAG between DSA masters. It is not -possible to statically assign a user port towards a DSA master that has any -upper interfaces (this includes LAG devices - the master must always be the LAG +static user to CPU port assignment with LAG between DSA conduits. It is not +possible to statically assign a user port towards a DSA conduit that has any +upper interfaces (this includes LAG devices - the conduit must always be the LAG in this case). -Live changing of the DSA master (and thus CPU port) affinity of a user port is +Live changing of the DSA conduit (and thus CPU port) affinity of a user port is permitted, in order to allow dynamic redistribution in response to traffic. -Physical DSA masters are allowed to join and leave at any time a LAG interface -used as a DSA master; however, DSA will reject a LAG interface as a valid -candidate for being a DSA master unless it has at least one physical DSA master +Physical DSA conduits are allowed to join and leave at any time a LAG interface +used as a DSA conduit; however, DSA will reject a LAG interface as a valid +candidate for being a DSA conduit unless it has at least one physical DSA conduit as a slave device. diff --git a/Documentation/networking/dsa/dsa.rst b/Documentation/networking/dsa/dsa.rst index a94ddf83348a..7b2e69cd7ef0 100644 --- a/Documentation/networking/dsa/dsa.rst +++ b/Documentation/networking/dsa/dsa.rst @@ -25,7 +25,7 @@ presence of a management port connected to an Ethernet controller capable of receiving Ethernet frames from the switch. This is a very common setup for all kinds of Ethernet switches found in Small Home and Office products: routers, gateways, or even top-of-rack switches. This host Ethernet controller will -be later referred to as "master" and "cpu" in DSA terminology and code. +be later referred to as "conduit" and "cpu" in DSA terminology and code. The D in DSA stands for Distributed, because the subsystem has been designed with the ability to configure and manage cascaded switches on top of each other @@ -35,7 +35,7 @@ of multiple switches connected to each other is called a "switch tree". For each front-panel port, DSA creates specialized network devices which are used as controlling and data-flowing endpoints for use by the Linux networking -stack. These specialized network interfaces are referred to as "slave" network +stack. These specialized network interfaces are referred to as "user" network interfaces in DSA terminology and code. The ideal case for using DSA is when an Ethernet switch supports a "switch tag" @@ -56,12 +56,16 @@ Note that DSA does not currently create network interfaces for the "cpu" and - the "cpu" port is the Ethernet switch facing side of the management controller, and as such, would create a duplication of feature, since you - would get two interfaces for the same conduit: master netdev, and "cpu" netdev + would get two interfaces for the same conduit: conduit netdev, and "cpu" netdev - the "dsa" port(s) are just conduits between two or more switches, and as such cannot really be used as proper network interfaces either, only the downstream, or the top-most upstream interface makes sense with that model +NB: for the past 15 years, the DSA subsystem had been making use of the terms +"master" (rather than "conduit") and "slave" (rather than "user"). These terms +have been removed from the DSA codebase and phased out of the uAPI. + Switch tagging protocols ------------------------ @@ -80,14 +84,14 @@ methods of the ``struct dsa_device_ops`` structure, which are detailed below. Tagging protocols generally fall in one of three categories: 1. The switch-specific frame header is located before the Ethernet header, - shifting to the right (from the perspective of the DSA master's frame + shifting to the right (from the perspective of the DSA conduit's frame parser) the MAC DA, MAC SA, EtherType and the entire L2 payload. 2. The switch-specific frame header is located before the EtherType, keeping - the MAC DA and MAC SA in place from the DSA master's perspective, but + the MAC DA and MAC SA in place from the DSA conduit's perspective, but shifting the 'real' EtherType and L2 payload to the right. 3. The switch-specific frame header is located at the tail of the packet, keeping all frame headers in place and not altering the view of the packet - that the DSA master's frame parser has. + that the DSA conduit's frame parser has. A tagging protocol may tag all packets with switch tags of the same length, or the tag length might vary (for example packets with PTP timestamps might @@ -95,7 +99,7 @@ require an extended switch tag, or there might be one tag length on TX and a different one on RX). Either way, the tagging protocol driver must populate the ``struct dsa_device_ops::needed_headroom`` and/or ``struct dsa_device_ops::needed_tailroom`` with the length in octets of the longest switch frame header/trailer. The DSA -framework will automatically adjust the MTU of the master interface to +framework will automatically adjust the MTU of the conduit interface to accommodate for this extra size in order for DSA user ports to support the standard MTU (L2 payload length) of 1500 octets. The ``needed_headroom`` and ``needed_tailroom`` properties are also used to request from the network stack, @@ -140,18 +144,18 @@ adding or removing the ``ETH_P_EDSA`` EtherType and some padding octets). It is possible to construct cascaded setups of DSA switches even if their tagging protocols are not compatible with one another. In this case, there are no DSA links in this fabric, and each switch constitutes a disjoint DSA switch -tree. The DSA links are viewed as simply a pair of a DSA master (the out-facing +tree. The DSA links are viewed as simply a pair of a DSA conduit (the out-facing port of the upstream DSA switch) and a CPU port (the in-facing port of the downstream DSA switch). The tagging protocol of the attached DSA switch tree can be viewed through the -``dsa/tagging`` sysfs attribute of the DSA master:: +``dsa/tagging`` sysfs attribute of the DSA conduit:: cat /sys/class/net/eth0/dsa/tagging If the hardware and driver are capable, the tagging protocol of the DSA switch tree can be changed at runtime. This is done by writing the new tagging -protocol name to the same sysfs device attribute as above (the DSA master and +protocol name to the same sysfs device attribute as above (the DSA conduit and all attached switch ports must be down while doing this). It is desirable that all tagging protocols are testable with the ``dsa_loop`` @@ -159,7 +163,7 @@ mockup driver, which can be attached to any network interface. The goal is that any network interface should be capable of transmitting the same packet in the same way, and the tagger should decode the same received packet in the same way regardless of the driver used for the switch control path, and the driver used -for the DSA master. +for the DSA conduit. The transmission of a packet goes through the tagger's ``xmit`` function. The passed ``struct sk_buff *skb`` has ``skb->data`` pointing at @@ -183,44 +187,44 @@ virtual DSA user network interface corresponding to the physical front-facing switch port that the packet was received on. Since tagging protocols in category 1 and 2 break software (and most often also -hardware) packet dissection on the DSA master, features such as RPS (Receive -Packet Steering) on the DSA master would be broken. The DSA framework deals +hardware) packet dissection on the DSA conduit, features such as RPS (Receive +Packet Steering) on the DSA conduit would be broken. The DSA framework deals with this by hooking into the flow dissector and shifting the offset at which -the IP header is to be found in the tagged frame as seen by the DSA master. +the IP header is to be found in the tagged frame as seen by the DSA conduit. This behavior is automatic based on the ``overhead`` value of the tagging protocol. If not all packets are of equal size, the tagger can implement the ``flow_dissect`` method of the ``struct dsa_device_ops`` and override this default behavior by specifying the correct offset incurred by each individual RX packet. Tail taggers do not cause issues to the flow dissector. -Checksum offload should work with category 1 and 2 taggers when the DSA master +Checksum offload should work with category 1 and 2 taggers when the DSA conduit driver declares NETIF_F_HW_CSUM in vlan_features and looks at csum_start and csum_offset. For those cases, DSA will shift the checksum start and offset by -the tag size. If the DSA master driver still uses the legacy NETIF_F_IP_CSUM +the tag size. If the DSA conduit driver still uses the legacy NETIF_F_IP_CSUM or NETIF_F_IPV6_CSUM in vlan_features, the offload might only work if the offload hardware already expects that specific tag (perhaps due to matching -vendors). DSA slaves inherit those flags from the master port, and it is up to +vendors). DSA user ports inherit those flags from the conduit, and it is up to the driver to correctly fall back to software checksum when the IP header is not where the hardware expects. If that check is ineffective, the packets might go to the network without a proper checksum (the checksum field will have the pseudo IP header sum). For category 3, when the offload hardware does not already expect the switch tag in use, the checksum must be calculated before any -tag is inserted (i.e. inside the tagger). Otherwise, the DSA master would +tag is inserted (i.e. inside the tagger). Otherwise, the DSA conduit would include the tail tag in the (software or hardware) checksum calculation. Then, when the tag gets stripped by the switch during transmission, it will leave an incorrect IP checksum in place. Due to various reasons (most common being category 1 taggers being associated -with DSA-unaware masters, mangling what the master perceives as MAC DA), the -tagging protocol may require the DSA master to operate in promiscuous mode, to +with DSA-unaware conduits, mangling what the conduit perceives as MAC DA), the +tagging protocol may require the DSA conduit to operate in promiscuous mode, to receive all frames regardless of the value of the MAC DA. This can be done by -setting the ``promisc_on_master`` property of the ``struct dsa_device_ops``. -Note that this assumes a DSA-unaware master driver, which is the norm. +setting the ``promisc_on_conduit`` property of the ``struct dsa_device_ops``. +Note that this assumes a DSA-unaware conduit driver, which is the norm. -Master network devices ----------------------- +Conduit network devices +----------------------- -Master network devices are regular, unmodified Linux network device drivers for +Conduit network devices are regular, unmodified Linux network device drivers for the CPU/management Ethernet interface. Such a driver might occasionally need to know whether DSA is enabled (e.g.: to enable/disable specific offload features), but the DSA subsystem has been proven to work with industry standard drivers: @@ -232,14 +236,14 @@ Ethernet switch. Networking stack hooks ---------------------- -When a master netdev is used with DSA, a small hook is placed in the +When a conduit netdev is used with DSA, a small hook is placed in the networking stack is in order to have the DSA subsystem process the Ethernet switch specific tagging protocol. DSA accomplishes this by registering a specific (and fake) Ethernet type (later becoming ``skb->protocol``) with the networking stack, this is also known as a ``ptype`` or ``packet_type``. A typical Ethernet Frame receive sequence looks like this: -Master network device (e.g.: e1000e): +Conduit network device (e.g.: e1000e): 1. Receive interrupt fires: @@ -269,16 +273,16 @@ Master network device (e.g.: e1000e): - inspect and strip switch tag protocol to determine originating port - locate per-port network device - - invoke ``eth_type_trans()`` with the DSA slave network device + - invoke ``eth_type_trans()`` with the DSA user network device - invoked ``netif_receive_skb()`` -Past this point, the DSA slave network devices get delivered regular Ethernet +Past this point, the DSA user network devices get delivered regular Ethernet frames that can be processed by the networking stack. -Slave network devices ---------------------- +User network devices +-------------------- -Slave network devices created by DSA are stacked on top of their master network +User network devices created by DSA are stacked on top of their conduit network device, each of these network interfaces will be responsible for being a controlling and data-flowing end-point for each front-panel port of the switch. These interfaces are specialized in order to: @@ -289,31 +293,31 @@ These interfaces are specialized in order to: Wake-on-LAN, register dumps... - manage external/internal PHY: link, auto-negotiation, etc. -These slave network devices have custom net_device_ops and ethtool_ops function +These user network devices have custom net_device_ops and ethtool_ops function pointers which allow DSA to introduce a level of layering between the networking stack/ethtool and the switch driver implementation. -Upon frame transmission from these slave network devices, DSA will look up which +Upon frame transmission from these user network devices, DSA will look up which switch tagging protocol is currently registered with these network devices and invoke a specific transmit routine which takes care of adding the relevant switch tag in the Ethernet frames. -These frames are then queued for transmission using the master network device +These frames are then queued for transmission using the conduit network device ``ndo_start_xmit()`` function. Since they contain the appropriate switch tag, the Ethernet switch will be able to process these incoming frames from the management interface and deliver them to the physical switch port. When using multiple CPU ports, it is possible to stack a LAG (bonding/team) -device between the DSA slave devices and the physical DSA masters. The LAG -device is thus also a DSA master, but the LAG slave devices continue to be DSA -masters as well (just with no user port assigned to them; this is needed for -recovery in case the LAG DSA master disappears). Thus, the data path of the LAG -DSA master is used asymmetrically. On RX, the ``ETH_P_XDSA`` handler, which -calls ``dsa_switch_rcv()``, is invoked early (on the physical DSA master; -LAG slave). Therefore, the RX data path of the LAG DSA master is not used. -On the other hand, TX takes place linearly: ``dsa_slave_xmit`` calls -``dsa_enqueue_skb``, which calls ``dev_queue_xmit`` towards the LAG DSA master. -The latter calls ``dev_queue_xmit`` towards one physical DSA master or the +device between the DSA user devices and the physical DSA conduits. The LAG +device is thus also a DSA conduit, but the LAG slave devices continue to be DSA +conduits as well (just with no user port assigned to them; this is needed for +recovery in case the LAG DSA conduit disappears). Thus, the data path of the LAG +DSA conduit is used asymmetrically. On RX, the ``ETH_P_XDSA`` handler, which +calls ``dsa_switch_rcv()``, is invoked early (on the physical DSA conduit; +LAG slave). Therefore, the RX data path of the LAG DSA conduit is not used. +On the other hand, TX takes place linearly: ``dsa_user_xmit`` calls +``dsa_enqueue_skb``, which calls ``dev_queue_xmit`` towards the LAG DSA conduit. +The latter calls ``dev_queue_xmit`` towards one physical DSA conduit or the other, and in both cases, the packet exits the system through a hardware path towards the switch. @@ -352,11 +356,11 @@ perspective:: || swp0 | | swp1 | | swp2 | | swp3 || ++------+-+------+-+------+-+------++ -Slave MDIO bus --------------- +User MDIO bus +------------- -In order to be able to read to/from a switch PHY built into it, DSA creates a -slave MDIO bus which allows a specific switch driver to divert and intercept +In order to be able to read to/from a switch PHY built into it, DSA creates an +user MDIO bus which allows a specific switch driver to divert and intercept MDIO reads/writes towards specific PHY addresses. In most MDIO-connected switches, these functions would utilize direct or indirect PHY addressing mode to return standard MII registers from the switch builtin PHYs, allowing the PHY @@ -364,7 +368,7 @@ library and/or to return link status, link partner pages, auto-negotiation results, etc. For Ethernet switches which have both external and internal MDIO buses, the -slave MII bus can be utilized to mux/demux MDIO reads and writes towards either +user MII bus can be utilized to mux/demux MDIO reads and writes towards either internal or external MDIO devices this switch might be connected to: internal PHYs, external PHYs, or even external switches. @@ -381,10 +385,10 @@ DSA data structures are defined in ``include/net/dsa.h`` as well as - ``dsa_platform_data``: platform device configuration data which can reference a collection of dsa_chip_data structures if multiple switches are cascaded, - the master network device this switch tree is attached to needs to be + the conduit network device this switch tree is attached to needs to be referenced -- ``dsa_switch_tree``: structure assigned to the master network device under +- ``dsa_switch_tree``: structure assigned to the conduit network device under ``dsa_ptr``, this structure references a dsa_platform_data structure as well as the tagging protocol supported by the switch tree, and which receive/transmit function hooks should be invoked, information about the directly attached @@ -392,7 +396,7 @@ DSA data structures are defined in ``include/net/dsa.h`` as well as referenced to address individual switches in the tree. - ``dsa_switch``: structure describing a switch device in the tree, referencing - a ``dsa_switch_tree`` as a backpointer, slave network devices, master network + a ``dsa_switch_tree`` as a backpointer, user network devices, conduit network device, and a reference to the backing``dsa_switch_ops`` - ``dsa_switch_ops``: structure referencing function pointers, see below for a @@ -404,7 +408,7 @@ Design limitations Lack of CPU/DSA network devices ------------------------------- -DSA does not currently create slave network devices for the CPU or DSA ports, as +DSA does not currently create user network devices for the CPU or DSA ports, as described before. This might be an issue in the following cases: - inability to fetch switch CPU port statistics counters using ethtool, which @@ -419,7 +423,7 @@ described before. This might be an issue in the following cases: Common pitfalls using DSA setups -------------------------------- -Once a master network device is configured to use DSA (dev->dsa_ptr becomes +Once a conduit network device is configured to use DSA (dev->dsa_ptr becomes non-NULL), and the switch behind it expects a tagging protocol, this network interface can only exclusively be used as a conduit interface. Sending packets directly through this interface (e.g.: opening a socket using this interface) @@ -440,7 +444,7 @@ DSA currently leverages the following subsystems: MDIO/PHY library ---------------- -Slave network devices exposed by DSA may or may not be interfacing with PHY +User network devices exposed by DSA may or may not be interfacing with PHY devices (``struct phy_device`` as defined in ``include/linux/phy.h)``, but the DSA subsystem deals with all possible combinations: @@ -450,7 +454,7 @@ subsystem deals with all possible combinations: - special, non-autonegotiated or non MDIO-managed PHY devices: SFPs, MoCA; a.k.a fixed PHYs -The PHY configuration is done by the ``dsa_slave_phy_setup()`` function and the +The PHY configuration is done by the ``dsa_user_phy_setup()`` function and the logic basically looks like this: - if Device Tree is used, the PHY device is looked up using the standard @@ -463,7 +467,7 @@ logic basically looks like this: and connected transparently using the special fixed MDIO bus driver - finally, if the PHY is built into the switch, as is very common with - standalone switch packages, the PHY is probed using the slave MII bus created + standalone switch packages, the PHY is probed using the user MII bus created by DSA @@ -472,7 +476,7 @@ SWITCHDEV DSA directly utilizes SWITCHDEV when interfacing with the bridge layer, and more specifically with its VLAN filtering portion when configuring VLANs on top -of per-port slave network devices. As of today, the only SWITCHDEV objects +of per-port user network devices. As of today, the only SWITCHDEV objects supported by DSA are the FDB and VLAN objects. Devlink @@ -589,8 +593,8 @@ is torn down when the first switch unregisters. It is mandatory for DSA switch drivers to implement the ``shutdown()`` callback of their respective bus, and call ``dsa_switch_shutdown()`` from it (a minimal version of the full teardown performed by ``dsa_unregister_switch()``). -The reason is that DSA keeps a reference on the master net device, and if the -driver for the master device decides to unbind on shutdown, DSA's reference +The reason is that DSA keeps a reference on the conduit net device, and if the +driver for the conduit device decides to unbind on shutdown, DSA's reference will block that operation from finalizing. Either ``dsa_switch_shutdown()`` or ``dsa_unregister_switch()`` must be called, @@ -615,7 +619,7 @@ Switch configuration tag formats. - ``change_tag_protocol``: when the default tagging protocol has compatibility - problems with the master or other issues, the driver may support changing it + problems with the conduit or other issues, the driver may support changing it at runtime, either through a device tree property or through sysfs. In that case, further calls to ``get_tag_protocol`` should report the protocol in current use. @@ -643,22 +647,22 @@ Switch configuration PHY cannot be found. In this case, probing of the DSA switch continues without that particular port. -- ``port_change_master``: method through which the affinity (association used +- ``port_change_conduit``: method through which the affinity (association used for traffic termination purposes) between a user port and a CPU port can be changed. By default all user ports from a tree are assigned to the first available CPU port that makes sense for them (most of the times this means the user ports of a tree are all assigned to the same CPU port, except for H topologies as described in commit 2c0b03258b8b). The ``port`` argument - represents the index of the user port, and the ``master`` argument represents - the new DSA master ``net_device``. The CPU port associated with the new - master can be retrieved by looking at ``struct dsa_port *cpu_dp = - master->dsa_ptr``. Additionally, the master can also be a LAG device where - all the slave devices are physical DSA masters. LAG DSA masters also have a - valid ``master->dsa_ptr`` pointer, however this is not unique, but rather a - duplicate of the first physical DSA master's (LAG slave) ``dsa_ptr``. In case - of a LAG DSA master, a further call to ``port_lag_join`` will be emitted + represents the index of the user port, and the ``conduit`` argument represents + the new DSA conduit ``net_device``. The CPU port associated with the new + conduit can be retrieved by looking at ``struct dsa_port *cpu_dp = + conduit->dsa_ptr``. Additionally, the conduit can also be a LAG device where + all the slave devices are physical DSA conduits. LAG DSA also have a + valid ``conduit->dsa_ptr`` pointer, however this is not unique, but rather a + duplicate of the first physical DSA conduit's (LAG slave) ``dsa_ptr``. In case + of a LAG DSA conduit, a further call to ``port_lag_join`` will be emitted separately for the physical CPU ports associated with the physical DSA - masters, requesting them to create a hardware LAG associated with the LAG + conduits, requesting them to create a hardware LAG associated with the LAG interface. PHY devices and link management @@ -670,16 +674,16 @@ PHY devices and link management should return a 32-bit bitmask of "flags" that is private between the switch driver and the Ethernet PHY driver in ``drivers/net/phy/\*``. -- ``phy_read``: Function invoked by the DSA slave MDIO bus when attempting to read +- ``phy_read``: Function invoked by the DSA user MDIO bus when attempting to read the switch port MDIO registers. If unavailable, return 0xffff for each read. For builtin switch Ethernet PHYs, this function should allow reading the link status, auto-negotiation results, link partner pages, etc. -- ``phy_write``: Function invoked by the DSA slave MDIO bus when attempting to write +- ``phy_write``: Function invoked by the DSA user MDIO bus when attempting to write to the switch port MDIO registers. If unavailable return a negative error code. -- ``adjust_link``: Function invoked by the PHY library when a slave network device +- ``adjust_link``: Function invoked by the PHY library when a user network device is attached to a PHY device. This function is responsible for appropriately configuring the switch port link parameters: speed, duplex, pause based on what the ``phy_device`` is providing. @@ -698,14 +702,14 @@ Ethtool operations typically return statistics strings, private flags strings, etc. - ``get_ethtool_stats``: ethtool function used to query per-port statistics and - return their values. DSA overlays slave network devices general statistics: + return their values. DSA overlays user network devices general statistics: RX/TX counters from the network device, with switch driver specific statistics per port - ``get_sset_count``: ethtool function used to query the number of statistics items - ``get_wol``: ethtool function used to obtain Wake-on-LAN settings per-port, this - function may for certain implementations also query the master network device + function may for certain implementations also query the conduit network device Wake-on-LAN settings if this interface needs to participate in Wake-on-LAN - ``set_wol``: ethtool function used to configure Wake-on-LAN settings per-port, @@ -747,13 +751,13 @@ Power management should resume all Ethernet switch activities and re-configure the switch to be in a fully active state -- ``port_enable``: function invoked by the DSA slave network device ndo_open +- ``port_enable``: function invoked by the DSA user network device ndo_open function when a port is administratively brought up, this function should fully enable a given switch port. DSA takes care of marking the port with ``BR_STATE_BLOCKING`` if the port is a bridge member, or ``BR_STATE_FORWARDING`` if it was not, and propagating these changes down to the hardware -- ``port_disable``: function invoked by the DSA slave network device ndo_close +- ``port_disable``: function invoked by the DSA user network device ndo_close function when a port is administratively brought down, this function should fully disable a given switch port. DSA takes care of marking the port with ``BR_STATE_DISABLED`` and propagating changes to the hardware if this port is diff --git a/Documentation/networking/dsa/lan9303.rst b/Documentation/networking/dsa/lan9303.rst index e3c820db28ad..ab81b4e0139e 100644 --- a/Documentation/networking/dsa/lan9303.rst +++ b/Documentation/networking/dsa/lan9303.rst @@ -4,7 +4,7 @@ LAN9303 Ethernet switch driver The LAN9303 is a three port 10/100 Mbps ethernet switch with integrated phys for the two external ethernet ports. The third port is an RMII/MII interface to a -host master network interface (e.g. fixed link). +host conduit network interface (e.g. fixed link). Driver details diff --git a/Documentation/networking/dsa/sja1105.rst b/Documentation/networking/dsa/sja1105.rst index e0219c1452ab..8ab60eef07d4 100644 --- a/Documentation/networking/dsa/sja1105.rst +++ b/Documentation/networking/dsa/sja1105.rst @@ -79,7 +79,7 @@ The hardware tags all traffic internally with a port-based VLAN (pvid), or it decodes the VLAN information from the 802.1Q tag. Advanced VLAN classification is not possible. Once attributed a VLAN tag, frames are checked against the port's membership rules and dropped at ingress if they don't match any VLAN. -This behavior is available when switch ports are enslaved to a bridge with +This behavior is available when switch ports join a bridge with ``vlan_filtering 1``. Normally the hardware is not configurable with respect to VLAN awareness, but @@ -122,7 +122,7 @@ on egress. Using ``vlan_filtering=1``, the behavior is the other way around: offloaded flows can be steered to TX queues based on the VLAN PCP, but the DSA net devices are no longer able to do that. To inject frames into a hardware TX queue with VLAN awareness active, it is necessary to create a VLAN -sub-interface on the DSA master port, and send normal (0x8100) VLAN-tagged +sub-interface on the DSA conduit port, and send normal (0x8100) VLAN-tagged towards the switch, with the VLAN PCP bits set appropriately. Management traffic (having DMAC 01-80-C2-xx-xx-xx or 01-19-1B-xx-xx-xx) is the @@ -389,7 +389,7 @@ MDIO bus and PHY management The SJA1105 does not have an MDIO bus and does not perform in-band AN either. Therefore there is no link state notification coming from the switch device. A board would need to hook up the PHYs connected to the switch to any other -MDIO bus available to Linux within the system (e.g. to the DSA master's MDIO +MDIO bus available to Linux within the system (e.g. to the DSA conduit's MDIO bus). Link state management then works by the driver manually keeping in sync (over SPI commands) the MAC link speed with the settings negotiated by the PHY. diff --git a/Documentation/networking/filter.rst b/Documentation/networking/filter.rst index f69da5074860..7d8c5380492f 100644 --- a/Documentation/networking/filter.rst +++ b/Documentation/networking/filter.rst @@ -650,8 +650,8 @@ before a conversion to the new layout is being done behind the scenes! Currently, the classic BPF format is being used for JITing on most 32-bit architectures, whereas x86-64, aarch64, s390x, powerpc64, -sparc64, arm32, riscv64, riscv32 perform JIT compilation from eBPF -instruction set. +sparc64, arm32, riscv64, riscv32, loongarch64 perform JIT compilation +from eBPF instruction set. Testing ------- diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index 5b75c3f7a137..683eb42309cc 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -59,7 +59,6 @@ Contents: gtp ila ioam6-sysctl - ipddp ip_dynaddr ipsec ip-sysctl @@ -107,6 +106,7 @@ Contents: sysfs-tagging tc-actions-env-rules tc-queue-filters + tcp_ao tcp-thin team timestamping diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index a66054d0763a..4dfe0d9a57bb 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -745,6 +745,13 @@ tcp_comp_sack_nr - INTEGER Default : 44 +tcp_backlog_ack_defer - BOOLEAN + If set, user thread processing socket backlog tries sending + one ACK for the whole queue. This helps to avoid potential + long latencies at end of a TCP socket syscall. + + Default : true + tcp_slow_start_after_idle - BOOLEAN If set, provide RFC2861 behavior and time out the congestion window after an idle period. An idle period is defined at @@ -1176,6 +1183,19 @@ tcp_plb_cong_thresh - INTEGER Default: 128 +tcp_pingpong_thresh - INTEGER + The number of estimated data replies sent for estimated incoming data + requests that must happen before TCP considers that a connection is a + "ping-pong" (request-response) connection for which delayed + acknowledgments can provide benefits. + + This threshold is 1 by default, but some applications may need a higher + threshold for optimal performance. + + Possible Values: 1 - 255 + + Default: 1 + UDP variables ============= @@ -2304,6 +2324,17 @@ accept_ra_pinfo - BOOLEAN - enabled if accept_ra is enabled. - disabled if accept_ra is disabled. +ra_honor_pio_life - BOOLEAN + Whether to use RFC4862 Section 5.5.3e to determine the valid + lifetime of an address matching a prefix sent in a Router + Advertisement Prefix Information Option. + + - If enabled, the PIO valid lifetime will always be honored. + - If disabled, RFC4862 section 5.5.3e is used to determine + the valid lifetime of the address. + + Default: 0 (disabled) + accept_ra_rt_info_min_plen - INTEGER Minimum prefix length of Route Information in RA. @@ -2471,12 +2502,18 @@ use_tempaddr - INTEGER * -1 (for point-to-point devices and loopback devices) temp_valid_lft - INTEGER - valid lifetime (in seconds) for temporary addresses. + valid lifetime (in seconds) for temporary addresses. If less than the + minimum required lifetime (typically 5 seconds), temporary addresses + will not be created. Default: 172800 (2 days) temp_prefered_lft - INTEGER - Preferred lifetime (in seconds) for temporary addresses. + Preferred lifetime (in seconds) for temporary addresses. If + temp_prefered_lft is less than the minimum required lifetime (typically + 5 seconds), the preferred lifetime is the minimum required. If + temp_prefered_lft is greater than temp_valid_lft, the preferred lifetime + is temp_valid_lft. Default: 86400 (1 day) diff --git a/Documentation/networking/ipddp.rst b/Documentation/networking/ipddp.rst deleted file mode 100644 index be7091b77927..000000000000 --- a/Documentation/networking/ipddp.rst +++ /dev/null @@ -1,78 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -========================================================= -AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation -========================================================= - -Documentation ipddp.c - -This file is written by Jay Schulist <jschlst@samba.org> - -Introduction ------------- - -AppleTalk-IP (IPDDP) is the method computers connected to AppleTalk -networks can use to communicate via IP. AppleTalk-IP is simply IP datagrams -inside AppleTalk packets. - -Through this driver you can either allow your Linux box to communicate -IP over an AppleTalk network or you can provide IP gatewaying functions -for your AppleTalk users. - -You can currently encapsulate or decapsulate AppleTalk-IP on LocalTalk, -EtherTalk and PPPTalk. The only limit on the protocol is that of what -kernel AppleTalk layer and drivers are available. - -Each mode requires its own user space software. - -Compiling AppleTalk-IP Decapsulation/Encapsulation -================================================== - -AppleTalk-IP decapsulation needs to be compiled into your kernel. You -will need to turn on AppleTalk-IP driver support. Then you will need to -select ONE of the two options; IP to AppleTalk-IP encapsulation support or -AppleTalk-IP to IP decapsulation support. If you compile the driver -statically you will only be able to use the driver for the function you have -enabled in the kernel. If you compile the driver as a module you can -select what mode you want it to run in via a module loading param. -ipddp_mode=1 for AppleTalk-IP encapsulation and ipddp_mode=2 for -AppleTalk-IP to IP decapsulation. - -Basic instructions for user space tools -======================================= - -I will briefly describe the operation of the tools, but you will -need to consult the supporting documentation for each set of tools. - -Decapsulation - You will need to download a software package called -MacGate. In this distribution there will be a tool called MacRoute -which enables you to add routes to the kernel for your Macs by hand. -Also the tool MacRegGateWay is included to register the -proper IP Gateway and IP addresses for your machine. Included in this -distribution is a patch to netatalk-1.4b2+asun2.0a17.2 (available from -ftp.u.washington.edu/pub/user-supported/asun/) this patch is optional -but it allows automatic adding and deleting of routes for Macs. (Handy -for locations with large Mac installations) - -Encapsulation - You will need to download a software daemon called ipddpd. -This software expects there to be an AppleTalk-IP gateway on the network. -You will also need to add the proper routes to route your Linux box's IP -traffic out the ipddp interface. - -Common Uses of ipddp.c ----------------------- -Of course AppleTalk-IP decapsulation and encapsulation, but specifically -decapsulation is being used most for connecting LocalTalk networks to -IP networks. Although it has been used on EtherTalk networks to allow -Macs that are only able to tunnel IP over EtherTalk. - -Encapsulation has been used to allow a Linux box stuck on a LocalTalk -network to use IP. It should work equally well if you are stuck on an -EtherTalk only network. - -Further Assistance -------------------- -You can contact me (Jay Schulist <jschlst@samba.org>) with any -questions regarding decapsulation or encapsulation. Bradford W. Johnson -<johns393@maroon.tc.umn.edu> originally wrote the ipddp.c driver for IP -encapsulation in AppleTalk. diff --git a/Documentation/networking/mptcp-sysctl.rst b/Documentation/networking/mptcp-sysctl.rst index 15f1919d640c..69975ce25a02 100644 --- a/Documentation/networking/mptcp-sysctl.rst +++ b/Documentation/networking/mptcp-sysctl.rst @@ -25,6 +25,17 @@ add_addr_timeout - INTEGER (seconds) Default: 120 +close_timeout - INTEGER (seconds) + Set the make-after-break timeout: in absence of any close or + shutdown syscall, MPTCP sockets will maintain the status + unchanged for such time, after the last subflow removal, before + moving to TCP_CLOSE. + + The default value matches TCP_TIMEWAIT_LEN. This is a per-namespace + sysctl. + + Default: 60 + checksum_enabled - BOOLEAN Control whether DSS checksum can be enabled. diff --git a/Documentation/networking/msg_zerocopy.rst b/Documentation/networking/msg_zerocopy.rst index b3ea96af9b49..78fb70e748b7 100644 --- a/Documentation/networking/msg_zerocopy.rst +++ b/Documentation/networking/msg_zerocopy.rst @@ -7,7 +7,8 @@ Intro ===== The MSG_ZEROCOPY flag enables copy avoidance for socket send calls. -The feature is currently implemented for TCP and UDP sockets. +The feature is currently implemented for TCP, UDP and VSOCK (with +virtio transport) sockets. Opportunity and Caveats @@ -174,7 +175,9 @@ read_notification() call in the previous snippet. A notification is encoded in the standard error format, sock_extended_err. The level and type fields in the control data are protocol family -specific, IP_RECVERR or IPV6_RECVERR. +specific, IP_RECVERR or IPV6_RECVERR (for TCP or UDP socket). +For VSOCK socket, cmsg_level will be SOL_VSOCK and cmsg_type will be +VSOCK_RECVERR. Error origin is the new type SO_EE_ORIGIN_ZEROCOPY. ee_errno is zero, as explained before, to avoid blocking read and write system calls on @@ -235,12 +238,15 @@ Implementation Loopback -------- +For TCP and UDP: Data sent to local sockets can be queued indefinitely if the receive process does not read its socket. Unbound notification latency is not acceptable. For this reason all packets generated with MSG_ZEROCOPY that are looped to a local socket will incur a deferred copy. This includes looping onto packet sockets (e.g., tcpdump) and tun devices. +For VSOCK: +Data path sent to local sockets is the same as for non-local sockets. Testing ======= @@ -254,3 +260,6 @@ instance when run with msg_zerocopy.sh between a veth pair across namespaces, the test will not show any improvement. For testing, the loopback restriction can be temporarily relaxed by making skb_orphan_frags_rx identical to skb_orphan_frags. + +For VSOCK type of socket example can be found in +tools/testing/vsock/vsock_test_zerocopy.c. diff --git a/Documentation/networking/netconsole.rst b/Documentation/networking/netconsole.rst index 7a9de0568e84..390730a74332 100644 --- a/Documentation/networking/netconsole.rst +++ b/Documentation/networking/netconsole.rst @@ -99,9 +99,6 @@ Dynamic reconfiguration: Dynamic reconfigurability is a useful addition to netconsole that enables remote logging targets to be dynamically added, removed, or have their parameters reconfigured at runtime from a configfs-based userspace interface. -[ Note that the parameters of netconsole targets that were specified/created -from the boot/module option are not exposed via this interface, and hence -cannot be modified dynamically. ] To include this feature, select CONFIG_NETCONSOLE_DYNAMIC when building the netconsole module (or kernel, if netconsole is built-in). @@ -155,6 +152,25 @@ You can also update the local interface dynamically. This is especially useful if you want to use interfaces that have newly come up (and may not have existed when netconsole was loaded / initialized). +Netconsole targets defined at boot time (or module load time) with the +`netconsole=` param are assigned the name `cmdline<index>`. For example, the +first target in the parameter is named `cmdline0`. You can control and modify +these targets by creating configfs directories with the matching name. + +Let's suppose you have two netconsole targets defined at boot time:: + + netconsole=4444@10.0.0.1/eth1,9353@10.0.0.2/12:34:56:78:9a:bc;4444@10.0.0.1/eth1,9353@10.0.0.3/12:34:56:78:9a:bc + +You can modify these targets in runtime by creating the following targets:: + + mkdir cmdline0 + cat cmdline0/remote_ip + 10.0.0.2 + + mkdir cmdline1 + cat cmdline1/remote_ip + 10.0.0.3 + Extended console: ================= diff --git a/Documentation/networking/page_pool.rst b/Documentation/networking/page_pool.rst index 215ebc92752c..60993cb56b32 100644 --- a/Documentation/networking/page_pool.rst +++ b/Documentation/networking/page_pool.rst @@ -58,7 +58,9 @@ a page will cause no race conditions is enough. .. kernel-doc:: include/net/page_pool/helpers.h :identifiers: page_pool_put_page page_pool_put_full_page - page_pool_recycle_direct page_pool_dev_alloc_pages + page_pool_recycle_direct page_pool_free_va + page_pool_dev_alloc_pages page_pool_dev_alloc_frag + page_pool_dev_alloc page_pool_dev_alloc_va page_pool_get_dma_addr page_pool_get_dma_dir .. kernel-doc:: net/core/page_pool.c diff --git a/Documentation/networking/pktgen.rst b/Documentation/networking/pktgen.rst index 1225f0f63ff0..c945218946e1 100644 --- a/Documentation/networking/pktgen.rst +++ b/Documentation/networking/pktgen.rst @@ -178,6 +178,7 @@ Examples:: IPSEC # IPsec encapsulation (needs CONFIG_XFRM) NODE_ALLOC # node specific memory allocation NO_TIMESTAMP # disable timestamping + SHARED # enable shared SKB pgset 'flag ![name]' Clear a flag to determine behaviour. Note that you might need to use single quote in interactive mode, so that your shell wouldn't expand @@ -288,6 +289,16 @@ To avoid breaking existing testbed scripts for using AH type and tunnel mode, you can use "pgset spi SPI_VALUE" to specify which transformation mode to employ. +Disable shared SKB +================== +By default, SKBs sent by pktgen are shared (user count > 1). +To test with non-shared SKBs, remove the "SHARED" flag by simply setting:: + + pg_set "flag !SHARED" + +However, if the "clone_skb" or "burst" parameters are configured, the skb +still needs to be held by pktgen for further access. Hence the skb must be +shared. Current commands and configuration options ========================================== @@ -357,6 +368,7 @@ Current commands and configuration options IPSEC NODE_ALLOC NO_TIMESTAMP + SHARED spi (ipsec) diff --git a/Documentation/networking/scaling.rst b/Documentation/networking/scaling.rst index 92c9fb46d6a2..03ae19a689fc 100644 --- a/Documentation/networking/scaling.rst +++ b/Documentation/networking/scaling.rst @@ -105,6 +105,48 @@ a separate CPU. For interrupt handling, HT has shown no benefit in initial tests, so limit the number of queues to the number of CPU cores in the system. +Dedicated RSS contexts +~~~~~~~~~~~~~~~~~~~~~~ + +Modern NICs support creating multiple co-existing RSS configurations +which are selected based on explicit matching rules. This can be very +useful when application wants to constrain the set of queues receiving +traffic for e.g. a particular destination port or IP address. +The example below shows how to direct all traffic to TCP port 22 +to queues 0 and 1. + +To create an additional RSS context use:: + + # ethtool -X eth0 hfunc toeplitz context new + New RSS context is 1 + +Kernel reports back the ID of the allocated context (the default, always +present RSS context has ID of 0). The new context can be queried and +modified using the same APIs as the default context:: + + # ethtool -x eth0 context 1 + RX flow hash indirection table for eth0 with 13 RX ring(s): + 0: 0 1 2 3 4 5 6 7 + 8: 8 9 10 11 12 0 1 2 + [...] + # ethtool -X eth0 equal 2 context 1 + # ethtool -x eth0 context 1 + RX flow hash indirection table for eth0 with 13 RX ring(s): + 0: 0 1 0 1 0 1 0 1 + 8: 0 1 0 1 0 1 0 1 + [...] + +To make use of the new context direct traffic to it using an n-tuple +filter:: + + # ethtool -N eth0 flow-type tcp6 dst-port 22 context 1 + Added rule with ID 1023 + +When done, remove the context and the rule:: + + # ethtool -N eth0 delete 1023 + # ethtool -X eth0 context 1 delete + RPS: Receive Packet Steering ============================ diff --git a/Documentation/networking/sfp-phylink.rst b/Documentation/networking/sfp-phylink.rst index 55b65f607a64..8054d33f449f 100644 --- a/Documentation/networking/sfp-phylink.rst +++ b/Documentation/networking/sfp-phylink.rst @@ -200,10 +200,12 @@ this documentation. when the in-band link state changes - otherwise the link will never come up. - The :c:func:`validate` method should mask the supplied supported mask, - and ``state->advertising`` with the supported ethtool link modes. - These are the new ethtool link modes, so bitmask operations must be - used. For an example, see ``drivers/net/ethernet/marvell/mvneta.c``. + The :c:func:`mac_get_caps` method is optional, and if provided should + return the phylink MAC capabilities that are supported for the passed + ``interface`` mode. In general, there is no need to implement this method. + Phylink will use these capabilities in combination with permissible + capabilities for ``interface`` to determine the allowable ethtool link + modes. The :c:func:`mac_link_state` method is used to read the link state from the MAC, and report back the settings that the MAC is currently diff --git a/Documentation/networking/tcp_ao.rst b/Documentation/networking/tcp_ao.rst new file mode 100644 index 000000000000..cfa5bf1cc542 --- /dev/null +++ b/Documentation/networking/tcp_ao.rst @@ -0,0 +1,444 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================================================== +TCP Authentication Option Linux implementation (RFC5925) +======================================================== + +TCP Authentication Option (TCP-AO) provides a TCP extension aimed at verifying +segments between trusted peers. It adds a new TCP header option with +a Message Authentication Code (MAC). MACs are produced from the content +of a TCP segment using a hashing function with a password known to both peers. +The intent of TCP-AO is to deprecate TCP-MD5 providing better security, +key rotation and support for variety of hashing algorithms. + +1. Introduction +=============== + +.. table:: Short and Limited Comparison of TCP-AO and TCP-MD5 + + +----------------------+------------------------+-----------------------+ + | | TCP-MD5 | TCP-AO | + +======================+========================+=======================+ + |Supported hashing |MD5 |Must support HMAC-SHA1 | + |algorithms |(cryptographically weak)|(chosen-prefix attacks)| + | | |and CMAC-AES-128 (only | + | | |side-channel attacks). | + | | |May support any hashing| + | | |algorithm. | + +----------------------+------------------------+-----------------------+ + |Length of MACs (bytes)|16 |Typically 12-16. | + | | |Other variants that fit| + | | |TCP header permitted. | + +----------------------+------------------------+-----------------------+ + |Number of keys per |1 |Many | + |TCP connection | | | + +----------------------+------------------------+-----------------------+ + |Possibility to change |Non-practical (both |Supported by protocol | + |an active key |peers have to change | | + | |them during MSL) | | + +----------------------+------------------------+-----------------------+ + |Protection against |No |Yes: ignoring them | + |ICMP 'hard errors' | |by default on | + | | |established connections| + +----------------------+------------------------+-----------------------+ + |Protection against |No |Yes: pseudo-header | + |traffic-crossing | |includes TCP ports. | + |attack | | | + +----------------------+------------------------+-----------------------+ + |Protection against |No |Sequence Number | + |replayed TCP segments | |Extension (SNE) and | + | | |Initial Sequence | + | | |Numbers (ISNs) | + +----------------------+------------------------+-----------------------+ + |Supports |Yes |No. ISNs+SNE are needed| + |Connectionless Resets | |to correctly sign RST. | + +----------------------+------------------------+-----------------------+ + |Standards |RFC 2385 |RFC 5925, RFC 5926 | + +----------------------+------------------------+-----------------------+ + + +1.1 Frequently Asked Questions (FAQ) with references to RFC 5925 +---------------------------------------------------------------- + +Q: Can either SendID or RecvID be non-unique for the same 4-tuple +(srcaddr, srcport, dstaddr, dstport)? + +A: No [3.1]:: + + >> The IDs of MKTs MUST NOT overlap where their TCP connection + identifiers overlap. + +Q: Can Master Key Tuple (MKT) for an active connection be removed? + +A: No, unless it's copied to Transport Control Block (TCB) [3.1]:: + + It is presumed that an MKT affecting a particular connection cannot + be destroyed during an active connection -- or, equivalently, that + its parameters are copied to an area local to the connection (i.e., + instantiated) and so changes would affect only new connections. + +Q: If an old MKT needs to be deleted, how should it be done in order +to not remove it for an active connection? (As it can be still in use +at any moment later) + +A: Not specified by RFC 5925, seems to be a problem for key management +to ensure that no one uses such MKT before trying to remove it. + +Q: Can an old MKT exist forever and be used by another peer? + +A: It can, it's a key management task to decide when to remove an old key [6.1]:: + + Deciding when to start using a key is a performance issue. Deciding + when to remove an MKT is a security issue. Invalid MKTs are expected + to be removed. TCP-AO provides no mechanism to coordinate their removal, + as we consider this a key management operation. + +also [6.1]:: + + The only way to avoid reuse of previously used MKTs is to remove the MKT + when it is no longer considered permitted. + +Linux TCP-AO will try its best to prevent you from removing a key that's +being used, considering it a key management failure. But sine keeping +an outdated key may become a security issue and as a peer may +unintentionally prevent the removal of an old key by always setting +it as RNextKeyID - a forced key removal mechanism is provided, where +userspace has to supply KeyID to use instead of the one that's being removed +and the kernel will atomically delete the old key, even if the peer is +still requesting it. There are no guarantees for force-delete as the peer +may yet not have the new key - the TCP connection may just break. +Alternatively, one may choose to shut down the socket. + +Q: What happens when a packet is received on a new connection with no known +MKT's RecvID? + +A: RFC 5925 specifies that by default it is accepted with a warning logged, but +the behaviour can be configured by the user [7.5.1.a]:: + + If the segment is a SYN, then this is the first segment of a new + connection. Find the matching MKT for this segment, using the segment's + socket pair and its TCP-AO KeyID, matched against the MKT's TCP connection + identifier and the MKT's RecvID. + + i. If there is no matching MKT, remove TCP-AO from the segment. + Proceed with further TCP handling of the segment. + NOTE: this presumes that connections that do not match any MKT + should be silently accepted, as noted in Section 7.3. + +[7.3]:: + + >> A TCP-AO implementation MUST allow for configuration of the behavior + of segments with TCP-AO but that do not match an MKT. The initial default + of this configuration SHOULD be to silently accept such connections. + If this is not the desired case, an MKT can be included to match such + connections, or the connection can indicate that TCP-AO is required. + Alternately, the configuration can be changed to discard segments with + the AO option not matching an MKT. + +[10.2.b]:: + + Connections not matching any MKT do not require TCP-AO. Further, incoming + segments with TCP-AO are not discarded solely because they include + the option, provided they do not match any MKT. + +Note that Linux TCP-AO implementation differs in this aspect. Currently, TCP-AO +segments with unknown key signatures are discarded with warnings logged. + +Q: Does the RFC imply centralized kernel key management in any way? +(i.e. that a key on all connections MUST be rotated at the same time?) + +A: Not specified. MKTs can be managed in userspace, the only relevant part to +key changes is [7.3]:: + + >> All TCP segments MUST be checked against the set of MKTs for matching + TCP connection identifiers. + +Q: What happens when RNextKeyID requested by a peer is unknown? Should +the connection be reset? + +A: It should not, no action needs to be performed [7.5.2.e]:: + + ii. If they differ, determine whether the RNextKeyID MKT is ready. + + 1. If the MKT corresponding to the segment’s socket pair and RNextKeyID + is not available, no action is required (RNextKeyID of a received + segment needs to match the MKT’s SendID). + +Q: How current_key is set and when does it change? It is a user-triggered +change, or is it by a request from the remote peer? Is it set by the user +explicitly, or by a matching rule? + +A: current_key is set by RNextKeyID [6.1]:: + + Rnext_key is changed only by manual user intervention or MKT management + protocol operation. It is not manipulated by TCP-AO. Current_key is updated + by TCP-AO when processing received TCP segments as discussed in the segment + processing description in Section 7.5. Note that the algorithm allows + the current_key to change to a new MKT, then change back to a previously + used MKT (known as "backing up"). This can occur during an MKT change when + segments are received out of order, and is considered a feature of TCP-AO, + because reordering does not result in drops. + +[7.5.2.e.ii]:: + + 2. If the matching MKT corresponding to the segment’s socket pair and + RNextKeyID is available: + + a. Set current_key to the RNextKeyID MKT. + +Q: If both peers have multiple MKTs matching the connection's socket pair +(with different KeyIDs), how should the sender/receiver pick KeyID to use? + +A: Some mechanism should pick the "desired" MKT [3.3]:: + + Multiple MKTs may match a single outgoing segment, e.g., when MKTs + are being changed. Those MKTs cannot have conflicting IDs (as noted + elsewhere), and some mechanism must determine which MKT to use for each + given outgoing segment. + + >> An outgoing TCP segment MUST match at most one desired MKT, indicated + by the segment’s socket pair. The segment MAY match multiple MKTs, provided + that exactly one MKT is indicated as desired. Other information in + the segment MAY be used to determine the desired MKT when multiple MKTs + match; such information MUST NOT include values in any TCP option fields. + +Q: Can TCP-MD5 connection migrate to TCP-AO (and vice-versa): + +A: No [1]:: + + TCP MD5-protected connections cannot be migrated to TCP-AO because TCP MD5 + does not support any changes to a connection’s security algorithm + once established. + +Q: If all MKTs are removed on a connection, can it become a non-TCP-AO signed +connection? + +A: [7.5.2] doesn't have the same choice as SYN packet handling in [7.5.1.i] +that would allow accepting segments without a sign (which would be insecure). +While switching to non-TCP-AO connection is not prohibited directly, it seems +what the RFC means. Also, there's a requirement for TCP-AO connections to +always have one current_key [3.3]:: + + TCP-AO requires that every protected TCP segment match exactly one MKT. + +[3.3]:: + + >> An incoming TCP segment including TCP-AO MUST match exactly one MKT, + indicated solely by the segment’s socket pair and its TCP-AO KeyID. + +[4.4]:: + + One or more MKTs. These are the MKTs that match this connection’s + socket pair. + +Q: Can a non-TCP-AO connection become a TCP-AO-enabled one? + +A: No: for already established non-TCP-AO connection it would be impossible +to switch using TCP-AO as the traffic key generation requires the initial +sequence numbers. Paraphrasing, starting using TCP-AO would require +re-establishing the TCP connection. + +2. In-kernel MKTs database vs database in userspace +=================================================== + +Linux TCP-AO support is implemented using ``setsockopt()s``, in a similar way +to TCP-MD5. It means that a userspace application that wants to use TCP-AO +should perform ``setsockopt()`` on a TCP socket when it wants to add, +remove or rotate MKTs. This approach moves the key management responsibility +to userspace as well as decisions on corner cases, i.e. what to do if +the peer doesn't respect RNextKeyID; moving more code to userspace, especially +responsible for the policy decisions. Besides, it's flexible and scales well +(with less locking needed than in the case of an in-kernel database). One also +should keep in mind that mainly intended users are BGP processes, not any +random applications, which means that compared to IPsec tunnels, +no transparency is really needed and modern BGP daemons already have +``setsockopt()s`` for TCP-MD5 support. + +.. table:: Considered pros and cons of the approaches + + +----------------------+------------------------+-----------------------+ + | | ``setsockopt()`` | in-kernel DB | + +======================+========================+=======================+ + | Extendability | ``setsockopt()`` | Netlink messages are | + | | commands should be | simple and extendable | + | | extendable syscalls | | + +----------------------+------------------------+-----------------------+ + | Required userspace | BGP or any application | could be transparent | + | changes | that wants TCP-AO needs| as tunnels, providing | + | | to perform | something like | + | | ``setsockopt()s`` | ``ip tcpao add key`` | + | | and do key management | (delete/show/rotate) | + +----------------------+------------------------+-----------------------+ + |MKTs removal or adding| harder for userspace | harder for kernel | + +----------------------+------------------------+-----------------------+ + | Dump-ability | ``getsockopt()`` | Netlink .dump() | + | | | callback | + +----------------------+------------------------+-----------------------+ + | Limits on kernel | equal | + | resources/memory | | + +----------------------+------------------------+-----------------------+ + | Scalability | contention on | contention on | + | | ``TCP_LISTEN`` sockets | the whole database | + +----------------------+------------------------+-----------------------+ + | Monitoring & warnings| ``TCP_DIAG`` | same Netlink socket | + +----------------------+------------------------+-----------------------+ + | Matching of MKTs | half-problem: only | hard | + | | listen sockets | | + +----------------------+------------------------+-----------------------+ + + +3. uAPI +======= + +Linux provides a set of ``setsockopt()s`` and ``getsockopt()s`` that let +userspace manage TCP-AO on a per-socket basis. In order to add/delete MKTs +``TCP_AO_ADD_KEY`` and ``TCP_AO_DEL_KEY`` TCP socket options must be used +It is not allowed to add a key on an established non-TCP-AO connection +as well as to remove the last key from TCP-AO connection. + +``setsockopt(TCP_AO_DEL_KEY)`` command may specify ``tcp_ao_del::current_key`` ++ ``tcp_ao_del::set_current`` and/or ``tcp_ao_del::rnext`` ++ ``tcp_ao_del::set_rnext`` which makes such delete "forced": it +provides userspace a way to delete a key that's being used and atomically set +another one instead. This is not intended for normal use and should be used +only when the peer ignores RNextKeyID and keeps requesting/using an old key. +It provides a way to force-delete a key that's not trusted but may break +the TCP-AO connection. + +The usual/normal key-rotation can be performed with ``setsockopt(TCP_AO_INFO)``. +It also provides a uAPI to change per-socket TCP-AO settings, such as +ignoring ICMPs, as well as clear per-socket TCP-AO packet counters. +The corresponding ``getsockopt(TCP_AO_INFO)`` can be used to get those +per-socket TCP-AO settings. + +Another useful command is ``getsockopt(TCP_AO_GET_KEYS)``. One can use it +to list all MKTs on a TCP socket or use a filter to get keys for a specific +peer and/or sndid/rcvid, VRF L3 interface or get current_key/rnext_key. + +To repair TCP-AO connections ``setsockopt(TCP_AO_REPAIR)`` is available, +provided that the user previously has checkpointed/dumped the socket with +``getsockopt(TCP_AO_REPAIR)``. + +A tip here for scaled TCP_LISTEN sockets, that may have some thousands TCP-AO +keys, is: use filters in ``getsockopt(TCP_AO_GET_KEYS)`` and asynchronous +delete with ``setsockopt(TCP_AO_DEL_KEY)``. + +Linux TCP-AO also provides a bunch of segment counters that can be helpful +with troubleshooting/debugging issues. Every MKT has good/bad counters +that reflect how many packets passed/failed verification. +Each TCP-AO socket has the following counters: +- for good segments (properly signed) +- for bad segments (failed TCP-AO verification) +- for segments with unknown keys +- for segments where an AO signature was expected, but wasn't found +- for the number of ignored ICMPs + +TCP-AO per-socket counters are also duplicated with per-netns counters, +exposed with SNMP. Those are ``TCPAOGood``, ``TCPAOBad``, ``TCPAOKeyNotFound``, +``TCPAORequired`` and ``TCPAODroppedIcmps``. + +RFC 5925 very permissively specifies how TCP port matching can be done for +MKTs:: + + TCP connection identifier. A TCP socket pair, i.e., a local IP + address, a remote IP address, a TCP local port, and a TCP remote port. + Values can be partially specified using ranges (e.g., 2-30), masks + (e.g., 0xF0), wildcards (e.g., "*"), or any other suitable indication. + +Currently Linux TCP-AO implementation doesn't provide any TCP port matching. +Probably, port ranges are the most flexible for uAPI, but so far +not implemented. + +4. ``setsockopt()`` vs ``accept()`` race +======================================== + +In contrast with TCP-MD5 established connection which has just one key, +TCP-AO connections may have many keys, which means that accepted connections +on a listen socket may have any amount of keys as well. As copying all those +keys on a first properly signed SYN would make the request socket bigger, that +would be undesirable. Currently, the implementation doesn't copy keys +to request sockets, but rather look them up on the "parent" listener socket. + +The result is that when userspace removes TCP-AO keys, that may break +not-yet-established connections on request sockets as well as not removing +keys from sockets that were already established, but not yet ``accept()``'ed, +hanging in the accept queue. + +The reverse is valid as well: if userspace adds a new key for a peer on +a listener socket, the established sockets in accept queue won't +have the new keys. + +At this moment, the resolution for the two races: +``setsockopt(TCP_AO_ADD_KEY)`` vs ``accept()`` +and ``setsockopt(TCP_AO_DEL_KEY)`` vs ``accept()`` is delegated to userspace. +This means that it's expected that userspace would check the MKTs on the socket +that was returned by ``accept()`` to verify that any key rotation that +happened on listen socket is reflected on the newly established connection. + +This is a similar "do-nothing" approach to TCP-MD5 from the kernel side and +may be changed later by introducing new flags to ``tcp_ao_add`` +and ``tcp_ao_del``. + +Note that this race is rare for it needs TCP-AO key rotation to happen +during the 3-way handshake for the new TCP connection. + +5. Interaction with TCP-MD5 +=========================== + +A TCP connection can not migrate between TCP-AO and TCP-MD5 options. The +established sockets that have either AO or MD5 keys are restricted for +adding keys of the other option. + +For listening sockets the picture is different: BGP server may want to receive +both TCP-AO and (deprecated) TCP-MD5 clients. As a result, both types of keys +may be added to TCP_CLOSED or TCP_LISTEN sockets. It's not allowed to add +different types of keys for the same peer. + +6. SNE Linux implementation +=========================== + +RFC 5925 [6.2] describes the algorithm of how to extend TCP sequence numbers +with SNE. In short: TCP has to track the previous sequence numbers and set +sne_flag when the current SEQ number rolls over. The flag is cleared when +both current and previous SEQ numbers cross 0x7fff, which is 32Kb. + +In times when sne_flag is set, the algorithm compares SEQ for each packet with +0x7fff and if it's higher than 32Kb, it assumes that the packet should be +verified with SNE before the increment. As a result, there's +this [0; 32Kb] window, when packets with (SNE - 1) can be accepted. + +Linux implementation simplifies this a bit: as the network stack already tracks +the first SEQ byte that ACK is wanted for (snd_una) and the next SEQ byte that +is wanted (rcv_nxt) - that's enough information for a rough estimation +on where in the 4GB SEQ number space both sender and receiver are. +When they roll over to zero, the corresponding SNE gets incremented. + +tcp_ao_compute_sne() is called for each TCP-AO segment. It compares SEQ numbers +from the segment with snd_una or rcv_nxt and fits the result into a 2GB window around them, +detecting SEQ numbers rolling over. That simplifies the code a lot and only +requires SNE numbers to be stored on every TCP-AO socket. + +The 2GB window at first glance seems much more permissive compared to +RFC 5926. But that is only used to pick the correct SNE before/after +a rollover. It allows more TCP segment replays, but yet all regular +TCP checks in tcp_sequence() are applied on the verified segment. +So, it trades a bit more permissive acceptance of replayed/retransmitted +segments for the simplicity of the algorithm and what seems better behaviour +for large TCP windows. + +7. Links +======== + +RFC 5925 The TCP Authentication Option + https://www.rfc-editor.org/rfc/pdfrfc/rfc5925.txt.pdf + +RFC 5926 Cryptographic Algorithms for the TCP Authentication Option (TCP-AO) + https://www.rfc-editor.org/rfc/pdfrfc/rfc5926.txt.pdf + +Draft "SHA-2 Algorithm for the TCP Authentication Option (TCP-AO)" + https://datatracker.ietf.org/doc/html/draft-nayak-tcp-sha2-03 + +RFC 2385 Protection of BGP Sessions via the TCP MD5 Signature Option + https://www.rfc-editor.org/rfc/pdfrfc/rfc2385.txt.pdf + +:Author: Dmitry Safonov <dima@arista.com> diff --git a/Documentation/networking/xdp-rx-metadata.rst b/Documentation/networking/xdp-rx-metadata.rst index 25ce72af81c2..205696780b78 100644 --- a/Documentation/networking/xdp-rx-metadata.rst +++ b/Documentation/networking/xdp-rx-metadata.rst @@ -105,6 +105,13 @@ bpf_tail_call Adding programs that access metadata kfuncs to the ``BPF_MAP_TYPE_PROG_ARRAY`` is currently not supported. +Supported Devices +================= + +It is possible to query which kfunc the particular netdev implements via +netlink. See ``xdp-rx-metadata-features`` attribute set in +``Documentation/netlink/specs/netdev.yaml``. + Example ======= diff --git a/Documentation/process/7.AdvancedTopics.rst b/Documentation/process/7.AdvancedTopics.rst index bf7cbfb4caa5..43291704338e 100644 --- a/Documentation/process/7.AdvancedTopics.rst +++ b/Documentation/process/7.AdvancedTopics.rst @@ -146,6 +146,7 @@ pull. The git request-pull command can be helpful in this regard; it will format the request as other developers expect, and will also check to be sure that you have remembered to push those changes to the public server. +.. _development_advancedtopics_reviews: Reviewing patches ----------------- @@ -167,6 +168,12 @@ comments as questions rather than criticisms. Asking "how does the lock get released in this path?" will always work better than stating "the locking here is wrong." +Another technique that is useful in case of a disagreement is to ask for others +to chime in. If a discussion reaches a stalemate after a few exchanges, +then call for opinions of other reviewers or maintainers. Often those in +agreement with a reviewer remain silent unless called upon. +The opinion of multiple people carries exponentially more weight. + Different developers will review code from different points of view. Some are mostly concerned with coding style and whether code lines have trailing white space. Others will focus primarily on whether the change implemented @@ -176,3 +183,14 @@ security issues, duplication of code found elsewhere, adequate documentation, adverse effects on performance, user-space ABI changes, etc. All types of review, if they lead to better code going into the kernel, are welcome and worthwhile. + +There is no strict requirement to use specific tags like ``Reviewed-by``. +In fact reviews in plain English are more informative and encouraged +even when a tag is provided, e.g. "I looked at aspects A, B and C of this +submission and it looks good to me." +Some form of a review message or reply is obviously necessary otherwise +maintainers will not know that the reviewer has looked at the patch at all! + +Last but not least patch review may become a negative process, focused +on pointing out problems. Please throw in a compliment once in a while, +particularly for newbies! diff --git a/Documentation/process/maintainer-netdev.rst b/Documentation/process/maintainer-netdev.rst index 09dcf6377c27..7feacc20835e 100644 --- a/Documentation/process/maintainer-netdev.rst +++ b/Documentation/process/maintainer-netdev.rst @@ -441,6 +441,21 @@ in a way which would break what would normally be considered uAPI. new ``netdevsim`` features must be accompanied by selftests under ``tools/testing/selftests/``. +Reviewer guidance +----------------- + +Reviewing other people's patches on the list is highly encouraged, +regardless of the level of expertise. For general guidance and +helpful tips please see :ref:`development_advancedtopics_reviews`. + +It's safe to assume that netdev maintainers know the community and the level +of expertise of the reviewers. The reviewers should not be concerned about +their comments impeding or derailing the patch flow. + +Less experienced reviewers are highly encouraged to do more in-depth +review of submissions and not focus exclusively on trivial or subjective +matters like code formatting, tags etc. + Testimonials / feedback ----------------------- diff --git a/Documentation/userspace-api/netlink/genetlink-legacy.rst b/Documentation/userspace-api/netlink/genetlink-legacy.rst index 40b82ad5d54a..70a77387f6c4 100644 --- a/Documentation/userspace-api/netlink/genetlink-legacy.rst +++ b/Documentation/userspace-api/netlink/genetlink-legacy.rst @@ -11,6 +11,20 @@ the ``genetlink-legacy`` protocol level. Specification ============= +Globals +------- + +Attributes listed directly at the root level of the spec file. + +version +~~~~~~~ + +Generic Netlink family version, default is 1. + +``version`` has historically been used to introduce family changes +which may break backwards compatibility. Since compatibility breaking changes +are generally not allowed ``version`` is very rarely used. + Attribute type nests -------------------- @@ -168,7 +182,7 @@ members - ``name`` - The attribute name of the struct member - ``type`` - One of the scalar types ``u8``, ``u16``, ``u32``, ``u64``, ``s8``, - ``s16``, ``s32``, ``s64``, ``string`` or ``binary``. + ``s16``, ``s32``, ``s64``, ``string``, ``binary`` or ``bitfield32``. - ``byte-order`` - ``big-endian`` or ``little-endian`` - ``doc``, ``enum``, ``enum-as-flags``, ``display-hint`` - Same as for :ref:`attribute definitions <attribute_properties>` diff --git a/Documentation/userspace-api/netlink/specs.rst b/Documentation/userspace-api/netlink/specs.rst index cc4e2430997e..c1b951649113 100644 --- a/Documentation/userspace-api/netlink/specs.rst +++ b/Documentation/userspace-api/netlink/specs.rst @@ -86,11 +86,6 @@ name Name of the family. Name identifies the family in a unique way, since the Family IDs are allocated dynamically. -version -~~~~~~~ - -Generic Netlink family version, default is 1. - protocol ~~~~~~~~ @@ -408,10 +403,21 @@ This section describes the attribute types supported by the ``genetlink`` compatibility level. Refer to documentation of different levels for additional attribute types. -Scalar integer types +Common integer types -------------------- -Fixed-width integer types: +``sint`` and ``uint`` represent signed and unsigned 64 bit integers. +If the value can fit on 32 bits only 32 bits are carried in netlink +messages, otherwise full 64 bits are carried. Note that the payload +is only aligned to 4B, so the full 64 bit value may be unaligned! + +Common integer types should be preferred over fix-width types in majority +of cases. + +Fix-width integer types +----------------------- + +Fixed-width integer types include: ``u8``, ``u16``, ``u32``, ``u64``, ``s8``, ``s16``, ``s32``, ``s64``. Note that types smaller than 32 bit should be avoided as using them @@ -421,6 +427,9 @@ See :ref:`pad_type` for padding of 64 bit attributes. The payload of the attribute is the integer in host order unless ``byte-order`` specifies otherwise. +64 bit values are usually aligned by the kernel but it is recommended +that the user space is able to deal with unaligned values. + .. _pad_type: pad |