Merge 4.3-rc4 into char-misc-next

This is needed due to the duplicated iommu stuff to help with the merge
and to prevent future issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 files changed, 60 insertions, 18 deletions

diff --git a/Documentation/Changes b/Documentation/Changes
index 6d8863004858..f447f0516f07 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -43,7 +43,7 @@ o  udev                   081                     # udevd --version
 o  grub                   0.93                    # grub --version || grub-install --version
 o  mcelog                 0.6                     # mcelog --version
 o  iptables               1.4.2                   # iptables -V
-o  openssl & libcrypto    1.0.1k                  # openssl version
+o  openssl & libcrypto    1.0.0                   # openssl version
 
 
 Kernel compilation
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
index 635a3b036630..8d91ba9ff2fd 100644
--- a/Documentation/devicetree/bindings/input/cypress,cyapa.txt
+++ b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
@@ -25,7 +25,7 @@ Example:
 		/* Cypress Gen3 touchpad */
 		touchpad@67 {
 			compatible = "cypress,cyapa";
-			reg = <0x24>;
+			reg = <0x67>;
 			interrupt-parent = <&gpio>;
 			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;	/* GPIO 2 */
 			wakeup-source;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
index 391717a68f3b..ec96b1f01478 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
@@ -4,8 +4,8 @@ The MISC interrupt controller is a secondary controller for lower priority
 interrupt.
 
 Required Properties:
-- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc"
-  as fallback
+- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc" or
+  "qca,<soctype>-cpu-intc", "qca,ar7240-misc-intc"
 - reg: Base address and size of the controllers memory area
 - interrupt-parent: phandle of the parent interrupt controller.
 - interrupts: Interrupt specifier for the controllers interrupt.
@@ -13,6 +13,9 @@ Required Properties:
 - #interrupt-cells : Specifies the number of cells needed to encode interrupt
 		     source, should be 1
 
+Compatible fallback depends on the SoC. Use ar7100 for ar71xx and ar913x,
+use ar7240 for all other SoCs.
+
 Please refer to interrupts.txt in this directory for details of the common
 Interrupt Controllers bindings used by client devices.
 
@@ -28,3 +31,16 @@ Example:
 		interrupt-controller;
 		#interrupt-cells = <1>;
 	};
+
+Another example:
+
+	interrupt-controller@18060010 {
+		compatible = "qca,ar9331-misc-intc", qca,ar7240-misc-intc";
+		reg = <0x18060010 0x4>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <6>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index b85d000faeb4..c51f1146f3bd 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -361,7 +361,7 @@ For win8 devices with both T and C coordinates, the position mapping is
    ABS_MT_POSITION_X := T_X
    ABS_MT_POSITION_Y := T_Y
    ABS_MT_TOOL_X := C_X
-   ABS_MT_TOOL_X := C_Y
+   ABS_MT_TOOL_Y := C_Y
 
 Unfortunately, there is not enough information to specify both the touching
 ellipse and the tool ellipse, so one has to resort to approximations.  One
diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.txt
index 62328d76b55b..b0e911e0e8f5 100644
--- a/Documentation/power/pci.txt
+++ b/Documentation/power/pci.txt
@@ -979,20 +979,45 @@ every time right after the runtime_resume() callback has returned
 (alternatively, the runtime_suspend() callback will have to check if the
 device should really be suspended and return -EAGAIN if that is not the case).
 
-The runtime PM of PCI devices is disabled by default.  It is also blocked by
-pci_pm_init() that runs the pm_runtime_forbid() helper function.  If a PCI
-driver implements the runtime PM callbacks and intends to use the runtime PM
-framework provided by the PM core and the PCI subsystem, it should enable this
-feature by executing the pm_runtime_enable() helper function.  However, the
-driver should not call the pm_runtime_allow() helper function unblocking
-the runtime PM of the device.  Instead, it should allow user space or some
-platform-specific code to do that (user space can do it via sysfs), although
-once it has called pm_runtime_enable(), it must be prepared to handle the
+The runtime PM of PCI devices is enabled by default by the PCI core.  PCI
+device drivers do not need to enable it and should not attempt to do so.
+However, it is blocked by pci_pm_init() that runs the pm_runtime_forbid()
+helper function.  In addition to that, the runtime PM usage counter of
+each PCI device is incremented by local_pci_probe() before executing the
+probe callback provided by the device's driver.
+
+If a PCI driver implements the runtime PM callbacks and intends to use the
+runtime PM framework provided by the PM core and the PCI subsystem, it needs
+to decrement the device's runtime PM usage counter in its probe callback
+function.  If it doesn't do that, the counter will always be different from
+zero for the device and it will never be runtime-suspended.  The simplest
+way to do that is by calling pm_runtime_put_noidle(), but if the driver
+wants to schedule an autosuspend right away, for example, it may call
+pm_runtime_put_autosuspend() instead for this purpose.  Generally, it
+just needs to call a function that decrements the devices usage counter
+from its probe routine to make runtime PM work for the device.
+
+It is important to remember that the driver's runtime_suspend() callback
+may be executed right after the usage counter has been decremented, because
+user space may already have cuased the pm_runtime_allow() helper function
+unblocking the runtime PM of the device to run via sysfs, so the driver must
+be prepared to cope with that.
+
+The driver itself should not call pm_runtime_allow(), though.  Instead, it
+should let user space or some platform-specific code do that (user space can
+do it via sysfs as stated above), but it must be prepared to handle the
 runtime PM of the device correctly as soon as pm_runtime_allow() is called
-(which may happen at any time).  [It also is possible that user space causes
-pm_runtime_allow() to be called via sysfs before the driver is loaded, so in
-fact the driver has to be prepared to handle the runtime PM of the device as
-soon as it calls pm_runtime_enable().]
+(which may happen at any time, even before the driver is loaded).
+
+When the driver's remove callback runs, it has to balance the decrementation
+of the device's runtime PM usage counter at the probe time.  For this reason,
+if it has decremented the counter in its probe callback, it must run
+pm_runtime_get_noresume() in its remove callback.  [Since the core carries
+out a runtime resume of the device and bumps up the device's usage counter
+before running the driver's remove callback, the runtime PM of the device
+is effectively disabled for the duration of the remove execution and all
+runtime PM helper functions incrementing the device's usage counter are
+then effectively equivalent to pm_runtime_get_noresume().]
 
 The runtime PM framework works by processing requests to suspend or resume
 devices, or to check if they are idle (in which cases it is reasonable to
diff --git a/Documentation/ptp/testptp.c b/Documentation/ptp/testptp.c
index 2bc8abc57fa0..6c6247aaa7b9 100644
--- a/Documentation/ptp/testptp.c
+++ b/Documentation/ptp/testptp.c
@@ -18,6 +18,7 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #define _GNU_SOURCE
+#define __SANE_USERSPACE_TYPES__        /* For PPC64, to get LL64 types */
 #include <errno.h>
 #include <fcntl.h>
 #include <inttypes.h>