summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2009-09-14 10:37:28 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2009-09-14 10:37:28 -0700
commitd7e9660ad9d5e0845f52848bce31bcf5cdcdea6b (patch)
treec6c67d145771187b194d79d603742b31090a59d6 /Documentation
parentb8cb48aae1b8c50b37dcb7710363aa69a7a0d9ca (diff)
parent13af7a6ea502fcdd4c0e3d7de6e332b102309491 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits) netxen: update copyright netxen: fix tx timeout recovery netxen: fix file firmware leak netxen: improve pci memory access netxen: change firmware write size tg3: Fix return ring size breakage netxen: build fix for INET=n cdc-phonet: autoconfigure Phonet address Phonet: back-end for autoconfigured addresses Phonet: fix netlink address dump error handling ipv6: Add IFA_F_DADFAILED flag net: Add DEVTYPE support for Ethernet based devices mv643xx_eth.c: remove unused txq_set_wrr() ucc_geth: Fix hangs after switching from full to half duplex ucc_geth: Rearrange some code to avoid forward declarations phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs drivers/net/phy: introduce missing kfree drivers/net/wan: introduce missing kfree net: force bridge module(s) to be GPL Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded ... Fixed up trivial conflicts: - arch/x86/include/asm/socket.h converted to <asm-generic/socket.h> in the x86 tree. The generic header has the same new #define's, so that works out fine. - drivers/net/tun.c fix conflict between 89f56d1e9 ("tun: reuse struct sock fields") that switched over to using 'tun->socket.sk' instead of the redundantly available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks to the TUN driver") which added a new 'tun->sk' use. Noted in 'next' by Stephen Rothwell.
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/00-INDEX2
-rw-r--r--Documentation/btmrvl.txt119
-rw-r--r--Documentation/connector/Makefile5
-rw-r--r--Documentation/connector/cn_test.c33
-rw-r--r--Documentation/connector/connector.txt119
-rw-r--r--Documentation/connector/ucon.c62
-rw-r--r--Documentation/feature-removal-schedule.txt54
-rw-r--r--Documentation/kernel-parameters.txt5
-rw-r--r--Documentation/networking/00-INDEX2
-rw-r--r--Documentation/networking/ieee802154.txt20
-rw-r--r--Documentation/networking/ip-sysctl.txt47
11 files changed, 342 insertions, 126 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index d05737aaa84b..06b982affe76 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -82,6 +82,8 @@ block/
- info on the Block I/O (BIO) layer.
blockdev/
- info on block devices & drivers
+btmrvl.txt
+ - info on Marvell Bluetooth driver usage.
cachetlb.txt
- describes the cache/TLB flushing interfaces Linux uses.
cdrom/
diff --git a/Documentation/btmrvl.txt b/Documentation/btmrvl.txt
new file mode 100644
index 000000000000..34916a46c099
--- /dev/null
+++ b/Documentation/btmrvl.txt
@@ -0,0 +1,119 @@
+=======================================================================
+ README for btmrvl driver
+=======================================================================
+
+
+All commands are used via debugfs interface.
+
+=====================
+Set/get driver configurations:
+
+Path: /debug/btmrvl/config/
+
+gpiogap=[n]
+hscfgcmd
+ These commands are used to configure the host sleep parameters.
+ bit 8:0 -- Gap
+ bit 16:8 -- GPIO
+
+ where GPIO is the pin number of GPIO used to wake up the host.
+ It could be any valid GPIO pin# (e.g. 0-7) or 0xff (SDIO interface
+ wakeup will be used instead).
+
+ where Gap is the gap in milli seconds between wakeup signal and
+ wakeup event, or 0xff for special host sleep setting.
+
+ Usage:
+ # Use SDIO interface to wake up the host and set GAP to 0x80:
+ echo 0xff80 > /debug/btmrvl/config/gpiogap
+ echo 1 > /debug/btmrvl/config/hscfgcmd
+
+ # Use GPIO pin #3 to wake up the host and set GAP to 0xff:
+ echo 0x03ff > /debug/btmrvl/config/gpiogap
+ echo 1 > /debug/btmrvl/config/hscfgcmd
+
+psmode=[n]
+pscmd
+ These commands are used to enable/disable auto sleep mode
+
+ where the option is:
+ 1 -- Enable auto sleep mode
+ 0 -- Disable auto sleep mode
+
+ Usage:
+ # Enable auto sleep mode
+ echo 1 > /debug/btmrvl/config/psmode
+ echo 1 > /debug/btmrvl/config/pscmd
+
+ # Disable auto sleep mode
+ echo 0 > /debug/btmrvl/config/psmode
+ echo 1 > /debug/btmrvl/config/pscmd
+
+
+hsmode=[n]
+hscmd
+ These commands are used to enable host sleep or wake up firmware
+
+ where the option is:
+ 1 -- Enable host sleep
+ 0 -- Wake up firmware
+
+ Usage:
+ # Enable host sleep
+ echo 1 > /debug/btmrvl/config/hsmode
+ echo 1 > /debug/btmrvl/config/hscmd
+
+ # Wake up firmware
+ echo 0 > /debug/btmrvl/config/hsmode
+ echo 1 > /debug/btmrvl/config/hscmd
+
+
+======================
+Get driver status:
+
+Path: /debug/btmrvl/status/
+
+Usage:
+ cat /debug/btmrvl/status/<args>
+
+where the args are:
+
+curpsmode
+ This command displays current auto sleep status.
+
+psstate
+ This command display the power save state.
+
+hsstate
+ This command display the host sleep state.
+
+txdnldrdy
+ This command displays the value of Tx download ready flag.
+
+
+=====================
+
+Use hcitool to issue raw hci command, refer to hcitool manual
+
+ Usage: Hcitool cmd <ogf> <ocf> [Parameters]
+
+ Interface Control Command
+ hcitool cmd 0x3f 0x5b 0xf5 0x01 0x00 --Enable All interface
+ hcitool cmd 0x3f 0x5b 0xf5 0x01 0x01 --Enable Wlan interface
+ hcitool cmd 0x3f 0x5b 0xf5 0x01 0x02 --Enable BT interface
+ hcitool cmd 0x3f 0x5b 0xf5 0x00 0x00 --Disable All interface
+ hcitool cmd 0x3f 0x5b 0xf5 0x00 0x01 --Disable Wlan interface
+ hcitool cmd 0x3f 0x5b 0xf5 0x00 0x02 --Disable BT interface
+
+=======================================================================
+
+
+SD8688 firmware:
+
+/lib/firmware/sd8688_helper.bin
+/lib/firmware/sd8688.bin
+
+
+The images can be downloaded from:
+
+git.infradead.org/users/dwmw2/linux-firmware.git/libertas/
diff --git a/Documentation/connector/Makefile b/Documentation/connector/Makefile
index 8df1a7285a06..d98e4df98e24 100644
--- a/Documentation/connector/Makefile
+++ b/Documentation/connector/Makefile
@@ -9,3 +9,8 @@ hostprogs-y := ucon
always := $(hostprogs-y)
HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include
+
+all: modules
+
+modules clean:
+ $(MAKE) -C ../.. SUBDIRS=$(PWD) $@
diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c
index 6a5be5d5c8e4..1711adc33373 100644
--- a/Documentation/connector/cn_test.c
+++ b/Documentation/connector/cn_test.c
@@ -19,6 +19,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) "cn_test: " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -27,18 +29,17 @@
#include <linux/connector.h>
-static struct cb_id cn_test_id = { 0x123, 0x456 };
+static struct cb_id cn_test_id = { CN_NETLINK_USERS + 3, 0x456 };
static char cn_test_name[] = "cn_test";
static struct sock *nls;
static struct timer_list cn_test_timer;
-void cn_test_callback(void *data)
+static void cn_test_callback(struct cn_msg *msg)
{
- struct cn_msg *msg = (struct cn_msg *)data;
-
- printk("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n",
- __func__, jiffies, msg->id.idx, msg->id.val,
- msg->seq, msg->ack, msg->len, (char *)msg->data);
+ pr_info("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n",
+ __func__, jiffies, msg->id.idx, msg->id.val,
+ msg->seq, msg->ack, msg->len,
+ msg->len ? (char *)msg->data : "");
}
/*
@@ -63,9 +64,7 @@ static int cn_test_want_notify(void)
skb = alloc_skb(size, GFP_ATOMIC);
if (!skb) {
- printk(KERN_ERR "Failed to allocate new skb with size=%u.\n",
- size);
-
+ pr_err("failed to allocate new skb with size=%u\n", size);
return -ENOMEM;
}
@@ -114,12 +113,12 @@ static int cn_test_want_notify(void)
//netlink_broadcast(nls, skb, 0, ctl->group, GFP_ATOMIC);
netlink_unicast(nls, skb, 0, 0);
- printk(KERN_INFO "Request was sent. Group=0x%x.\n", ctl->group);
+ pr_info("request was sent: group=0x%x\n", ctl->group);
return 0;
nlmsg_failure:
- printk(KERN_ERR "Failed to send %u.%u\n", msg->seq, msg->ack);
+ pr_err("failed to send %u.%u\n", msg->seq, msg->ack);
kfree_skb(skb);
return -EINVAL;
}
@@ -131,6 +130,8 @@ static void cn_test_timer_func(unsigned long __data)
struct cn_msg *m;
char data[32];
+ pr_debug("%s: timer fired with data %lu\n", __func__, __data);
+
m = kzalloc(sizeof(*m) + sizeof(data), GFP_ATOMIC);
if (m) {
@@ -150,7 +151,7 @@ static void cn_test_timer_func(unsigned long __data)
cn_test_timer_counter++;
- mod_timer(&cn_test_timer, jiffies + HZ);
+ mod_timer(&cn_test_timer, jiffies + msecs_to_jiffies(1000));
}
static int cn_test_init(void)
@@ -168,8 +169,10 @@ static int cn_test_init(void)
}
setup_timer(&cn_test_timer, cn_test_timer_func, 0);
- cn_test_timer.expires = jiffies + HZ;
- add_timer(&cn_test_timer);
+ mod_timer(&cn_test_timer, jiffies + msecs_to_jiffies(1000));
+
+ pr_info("initialized with id={%u.%u}\n",
+ cn_test_id.idx, cn_test_id.val);
return 0;
diff --git a/Documentation/connector/connector.txt b/Documentation/connector/connector.txt
index ad6e0ba7b38c..81e6bf6ead57 100644
--- a/Documentation/connector/connector.txt
+++ b/Documentation/connector/connector.txt
@@ -5,10 +5,10 @@ Kernel Connector.
Kernel connector - new netlink based userspace <-> kernel space easy
to use communication module.
-Connector driver adds possibility to connect various agents using
-netlink based network. One must register callback and
-identifier. When driver receives special netlink message with
-appropriate identifier, appropriate callback will be called.
+The Connector driver makes it easy to connect various agents using a
+netlink based network. One must register a callback and an identifier.
+When the driver receives a special netlink message with the appropriate
+identifier, the appropriate callback will be called.
From the userspace point of view it's quite straightforward:
@@ -17,10 +17,10 @@ From the userspace point of view it's quite straightforward:
send();
recv();
-But if kernelspace want to use full power of such connections, driver
-writer must create special sockets, must know about struct sk_buff
-handling... Connector allows any kernelspace agents to use netlink
-based networking for inter-process communication in a significantly
+But if kernelspace wants to use the full power of such connections, the
+driver writer must create special sockets, must know about struct sk_buff
+handling, etc... The Connector driver allows any kernelspace agents to use
+netlink based networking for inter-process communication in a significantly
easier way:
int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
@@ -32,15 +32,15 @@ struct cb_id
__u32 val;
};
-idx and val are unique identifiers which must be registered in
-connector.h for in-kernel usage. void (*callback) (void *) - is a
-callback function which will be called when message with above idx.val
-will be received by connector core. Argument for that function must
+idx and val are unique identifiers which must be registered in the
+connector.h header for in-kernel usage. void (*callback) (void *) is a
+callback function which will be called when a message with above idx.val
+is received by the connector core. The argument for that function must
be dereferenced to struct cn_msg *.
struct cn_msg
{
- struct cb_id id;
+ struct cb_id id;
__u32 seq;
__u32 ack;
@@ -55,92 +55,95 @@ Connector interfaces.
int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
-Registers new callback with connector core.
+ Registers new callback with connector core.
-struct cb_id *id - unique connector's user identifier.
- It must be registered in connector.h for legal in-kernel users.
-char *name - connector's callback symbolic name.
-void (*callback) (void *) - connector's callback.
+ struct cb_id *id - unique connector's user identifier.
+ It must be registered in connector.h for legal in-kernel users.
+ char *name - connector's callback symbolic name.
+ void (*callback) (void *) - connector's callback.
Argument must be dereferenced to struct cn_msg *.
+
void cn_del_callback(struct cb_id *id);
-Unregisters new callback with connector core.
+ Unregisters new callback with connector core.
+
+ struct cb_id *id - unique connector's user identifier.
-struct cb_id *id - unique connector's user identifier.
int cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask);
-Sends message to the specified groups. It can be safely called from
-softirq context, but may silently fail under strong memory pressure.
-If there are no listeners for given group -ESRCH can be returned.
+ Sends message to the specified groups. It can be safely called from
+ softirq context, but may silently fail under strong memory pressure.
+ If there are no listeners for given group -ESRCH can be returned.
-struct cn_msg * - message header(with attached data).
-u32 __group - destination group.
+ struct cn_msg * - message header(with attached data).
+ u32 __group - destination group.
If __group is zero, then appropriate group will
be searched through all registered connector users,
and message will be delivered to the group which was
created for user with the same ID as in msg.
If __group is not zero, then message will be delivered
to the specified group.
-int gfp_mask - GFP mask.
+ int gfp_mask - GFP mask.
-Note: When registering new callback user, connector core assigns
-netlink group to the user which is equal to it's id.idx.
+ Note: When registering new callback user, connector core assigns
+ netlink group to the user which is equal to it's id.idx.
/*****************************************/
Protocol description.
/*****************************************/
-Current offers transport layer with fixed header. Recommended
-protocol which uses such header is following:
+The current framework offers a transport layer with fixed headers. The
+recommended protocol which uses such a header is as following:
msg->seq and msg->ack are used to determine message genealogy. When
-someone sends message it puts there locally unique sequence and random
-acknowledge numbers. Sequence number may be copied into
+someone sends a message, they use a locally unique sequence and random
+acknowledge number. The sequence number may be copied into
nlmsghdr->nlmsg_seq too.
-Sequence number is incremented with each message to be sent.
+The sequence number is incremented with each message sent.
-If we expect reply to our message, then sequence number in received
-message MUST be the same as in original message, and acknowledge
-number MUST be the same + 1.
+If you expect a reply to the message, then the sequence number in the
+received message MUST be the same as in the original message, and the
+acknowledge number MUST be the same + 1.
-If we receive message and it's sequence number is not equal to one we
-are expecting, then it is new message. If we receive message and it's
-sequence number is the same as one we are expecting, but it's
-acknowledge is not equal acknowledge number in original message + 1,
-then it is new message.
+If we receive a message and its sequence number is not equal to one we
+are expecting, then it is a new message. If we receive a message and
+its sequence number is the same as one we are expecting, but its
+acknowledge is not equal to the acknowledge number in the original
+message + 1, then it is a new message.
-Obviously, protocol header contains above id.
+Obviously, the protocol header contains the above id.
-connector allows event notification in the following form: kernel
+The connector allows event notification in the following form: kernel
driver or userspace process can ask connector to notify it when
-selected id's will be turned on or off(registered or unregistered it's
-callback). It is done by sending special command to connector
-driver(it also registers itself with id={-1, -1}).
+selected ids will be turned on or off (registered or unregistered its
+callback). It is done by sending a special command to the connector
+driver (it also registers itself with id={-1, -1}).
-As example of usage Documentation/connector now contains cn_test.c -
-testing module which uses connector to request notification and to
-send messages.
+As example of this usage can be found in the cn_test.c module which
+uses the connector to request notification and to send messages.
/*****************************************/
Reliability.
/*****************************************/
-Netlink itself is not reliable protocol, that means that messages can
+Netlink itself is not a reliable protocol. That means that messages can
be lost due to memory pressure or process' receiving queue overflowed,
-so caller is warned must be prepared. That is why struct cn_msg [main
-connector's message header] contains u32 seq and u32 ack fields.
+so caller is warned that it must be prepared. That is why the struct
+cn_msg [main connector's message header] contains u32 seq and u32 ack
+fields.
/*****************************************/
Userspace usage.
/*****************************************/
+
2.6.14 has a new netlink socket implementation, which by default does not
-allow to send data to netlink groups other than 1.
-So, if to use netlink socket (for example using connector)
-with different group number userspace application must subscribe to
-that group. It can be achieved by following pseudocode:
+allow people to send data to netlink groups other than 1.
+So, if you wish to use a netlink socket (for example using connector)
+with a different group number, the userspace application must subscribe to
+that group first. It can be achieved by the following pseudocode:
s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
@@ -160,8 +163,8 @@ if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
}
Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket
-option. To drop multicast subscription one should call above socket option
-with NETLINK_DROP_MEMBERSHIP parameter which is defined as 0.
+option. To drop a multicast subscription, one should call the above socket
+option with the NETLINK_DROP_MEMBERSHIP parameter which is defined as 0.
2.6.14 netlink code only allows to select a group which is less or equal to
the maximum group number, which is used at netlink_kernel_create() time.
diff --git a/Documentation/connector/ucon.c b/Documentation/connector/ucon.c
index c5092ad0ce4b..4848db8c71ff 100644
--- a/Documentation/connector/ucon.c
+++ b/Documentation/connector/ucon.c
@@ -30,18 +30,24 @@
#include <arpa/inet.h>
+#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <errno.h>
#include <time.h>
+#include <getopt.h>
#include <linux/connector.h>
#define DEBUG
#define NETLINK_CONNECTOR 11
+/* Hopefully your userspace connector.h matches this kernel */
+#define CN_TEST_IDX CN_NETLINK_USERS + 3
+#define CN_TEST_VAL 0x456
+
#ifdef DEBUG
#define ulog(f, a...) fprintf(stdout, f, ##a)
#else
@@ -83,6 +89,25 @@ static int netlink_send(int s, struct cn_msg *msg)
return err;
}
+static void usage(void)
+{
+ printf(
+ "Usage: ucon [options] [output file]\n"
+ "\n"
+ "\t-h\tthis help screen\n"
+ "\t-s\tsend buffers to the test module\n"
+ "\n"
+ "The default behavior of ucon is to subscribe to the test module\n"
+ "and wait for state messages. Any ones received are dumped to the\n"
+ "specified output file (or stdout). The test module is assumed to\n"
+ "have an id of {%u.%u}\n"
+ "\n"
+ "If you get no output, then verify the cn_test module id matches\n"
+ "the expected id above.\n"
+ , CN_TEST_IDX, CN_TEST_VAL
+ );
+}
+
int main(int argc, char *argv[])
{
int s;
@@ -94,17 +119,34 @@ int main(int argc, char *argv[])
FILE *out;
time_t tm;
struct pollfd pfd;
+ bool send_msgs = false;
- if (argc < 2)
- out = stdout;
- else {
- out = fopen(argv[1], "a+");
+ while ((s = getopt(argc, argv, "hs")) != -1) {
+ switch (s) {
+ case 's':
+ send_msgs = true;
+ break;
+
+ case 'h':
+ usage();
+ return 0;
+
+ default:
+ /* getopt() outputs an error for us */
+ usage();
+ return 1;
+ }
+ }
+
+ if (argc != optind) {
+ out = fopen(argv[optind], "a+");
if (!out) {
ulog("Unable to open %s for writing: %s\n",
argv[1], strerror(errno));
out = stdout;
}
- }
+ } else
+ out = stdout;
memset(buf, 0, sizeof(buf));
@@ -115,9 +157,11 @@ int main(int argc, char *argv[])
}
l_local.nl_family = AF_NETLINK;
- l_local.nl_groups = 0x123; /* bitmask of requested groups */
+ l_local.nl_groups = -1; /* bitmask of requested groups */
l_local.nl_pid = 0;
+ ulog("subscribing to %u.%u\n", CN_TEST_IDX, CN_TEST_VAL);
+
if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
perror("bind");
close(s);
@@ -130,15 +174,15 @@ int main(int argc, char *argv[])
setsockopt(s, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, &on, sizeof(on));
}
#endif
- if (0) {
+ if (send_msgs) {
int i, j;
memset(buf, 0, sizeof(buf));
data = (struct cn_msg *)buf;
- data->id.idx = 0x123;
- data->id.val = 0x456;
+ data->id.idx = CN_TEST_IDX;
+ data->id.val = CN_TEST_VAL;
data->seq = seq++;
data->ack = 0;
data->len = 0;
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index bb3a53cdfbc3..503d21216d58 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -6,6 +6,35 @@ be removed from this file.
---------------------------
+What: PRISM54
+When: 2.6.34
+
+Why: prism54 FullMAC PCI / Cardbus devices used to be supported only by the
+ prism54 wireless driver. After Intersil stopped selling these
+ devices in preference for the newer more flexible SoftMAC devices
+ a SoftMAC device driver was required and prism54 did not support
+ them. The p54pci driver now exists and has been present in the kernel for
+ a while. This driver supports both SoftMAC devices and FullMAC devices.
+ The main difference between these devices was the amount of memory which
+ could be used for the firmware. The SoftMAC devices support a smaller
+ amount of memory. Because of this the SoftMAC firmware fits into FullMAC
+ devices's memory. p54pci supports not only PCI / Cardbus but also USB
+ and SPI. Since p54pci supports all devices prism54 supports
+ you will have a conflict. I'm not quite sure how distributions are
+ handling this conflict right now. prism54 was kept around due to
+ claims users may experience issues when using the SoftMAC driver.
+ Time has passed users have not reported issues. If you use prism54
+ and for whatever reason you cannot use p54pci please let us know!
+ E-mail us at: linux-wireless@vger.kernel.org
+
+ For more information see the p54 wiki page:
+
+ http://wireless.kernel.org/en/users/Drivers/p54
+
+Who: Luis R. Rodriguez <lrodriguez@atheros.com>
+
+---------------------------
+
What: IRQF_SAMPLE_RANDOM
Check: IRQF_SAMPLE_RANDOM
When: July 2009
@@ -217,31 +246,6 @@ Who: Thomas Gleixner <tglx@linutronix.de>
---------------------------
What (Why):
- - include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files
- (superseded by xt_TOS/xt_tos target & match)
-
- - "forwarding" header files like ipt_mac.h in
- include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/
-
- - xt_CONNMARK match revision 0
- (superseded by xt_CONNMARK match revision 1)
-
- - xt_MARK target revisions 0 and 1
- (superseded by xt_MARK match revision 2)
-
- - xt_connmark match revision 0
- (superseded by xt_connmark match revision 1)
-
- - xt_conntrack match revision 0
- (superseded by xt_conntrack match revision 1)
-
- - xt_iprange match revision 0,
- include/linux/netfilter_ipv4/ipt_iprange.h
- (superseded by xt_iprange match revision 1)
-
- - xt_mark match revision 0
- (superseded by xt_mark match revision 1)
-
- xt_recent: the old ipt_recent proc dir
(superseded by /proc/net/xt_recent)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 5d4427d17281..cb3a169e372a 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1543,6 +1543,11 @@ and is between 256 and 4096 characters. It is defined in the file
symbolic names: lapic and ioapic
Example: nmi_watchdog=2 or nmi_watchdog=panic,lapic
+ netpoll.carrier_timeout=
+ [NET] Specifies amount of time (in seconds) that
+ netpoll should wait for a carrier. By default netpoll
+ waits 4 seconds.
+
no387 [BUGS=X86-32] Tells the kernel to use the 387 maths
emulation library even if a 387 maths coprocessor
is present.
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index 1634c6dcecae..50189bf07d53 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -60,6 +60,8 @@ framerelay.txt
- info on using Frame Relay/Data Link Connection Identifier (DLCI).
generic_netlink.txt
- info on Generic Netlink
+ieee802154.txt
+ - Linux IEEE 802.15.4 implementation, API and drivers
ip-sysctl.txt
- /proc/sys/net/ipv4/* variables
ip_dynaddr.txt
diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt
index a0280ad2edc9..23c995e64032 100644
--- a/Documentation/networking/ieee802154.txt
+++ b/Documentation/networking/ieee802154.txt
@@ -22,7 +22,7 @@ int sd = socket(PF_IEEE802154, SOCK_DGRAM, 0);
.....
The address family, socket addresses etc. are defined in the
-include/net/ieee802154/af_ieee802154.h header or in the special header
+include/net/af_ieee802154.h header or in the special header
in our userspace package (see either linux-zigbee sourceforge download page
or git tree at git://linux-zigbee.git.sourceforge.net/gitroot/linux-zigbee).
@@ -33,7 +33,7 @@ MLME - MAC Level Management
============================
Most of IEEE 802.15.4 MLME interfaces are directly mapped on netlink commands.
-See the include/net/ieee802154/nl802154.h header. Our userspace tools package
+See the include/net/nl802154.h header. Our userspace tools package
(see above) provides CLI configuration utility for radio interfaces and simple
coordinator for IEEE 802.15.4 networks as an example users of MLME protocol.
@@ -54,10 +54,14 @@ Those types of devices require different approach to be hooked into Linux kernel
HardMAC
=======
-See the header include/net/ieee802154/netdevice.h. You have to implement Linux
+See the header include/net/ieee802154_netdev.h. You have to implement Linux
net_device, with .type = ARPHRD_IEEE802154. Data is exchanged with socket family
-code via plain sk_buffs. The control block of sk_buffs will contain additional
-info as described in the struct ieee802154_mac_cb.
+code via plain sk_buffs. On skb reception skb->cb must contain additional
+info as described in the struct ieee802154_mac_cb. During packet transmission
+the skb->cb is used to provide additional data to device's header_ops->create
+function. Be aware, that this data can be overriden later (when socket code
+submits skb to qdisc), so if you need something from that cb later, you should
+store info in the skb->data on your own.
To hook the MLME interface you have to populate the ml_priv field of your
net_device with a pointer to struct ieee802154_mlme_ops instance. All fields are
@@ -69,8 +73,8 @@ We provide an example of simple HardMAC driver at drivers/ieee802154/fakehard.c
SoftMAC
=======
-We are going to provide intermediate layer impelementing IEEE 802.15.4 MAC
+We are going to provide intermediate layer implementing IEEE 802.15.4 MAC
in software. This is currently WIP.
-See header include/net/ieee802154/mac802154.h and several drivers in
-drivers/ieee802154/
+See header include/net/mac802154.h and several drivers in drivers/ieee802154/.
+
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 8be76235fe67..fbe427a6580c 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -311,9 +311,12 @@ tcp_no_metrics_save - BOOLEAN
connections.
tcp_orphan_retries - INTEGER
- How may times to retry before killing TCP connection, closed
- by our side. Default value 7 corresponds to ~50sec-16min
- depending on RTO. If you machine is loaded WEB server,
+ This value influences the timeout of a locally closed TCP connection,
+ when RTO retransmissions remain unacknowledged.
+ See tcp_retries2 for more details.
+
+ The default value is 7.
+ If your machine is a loaded WEB server,
you should think about lowering this value, such sockets
may consume significant resources. Cf. tcp_max_orphans.
@@ -327,16 +330,28 @@ tcp_retrans_collapse - BOOLEAN
certain TCP stacks.
tcp_retries1 - INTEGER
- How many times to retry before deciding that something is wrong
- and it is necessary to report this suspicion to network layer.
- Minimal RFC value is 3, it is default, which corresponds
- to ~3sec-8min depending on RTO.
+ This value influences the time, after which TCP decides, that
+ something is wrong due to unacknowledged RTO retransmissions,
+ and reports this suspicion to the network layer.
+ See tcp_retries2 for more details.
+
+ RFC 1122 recommends at least 3 retransmissions, which is the
+ default.
tcp_retries2 - INTEGER
- How may times to retry before killing alive TCP connection.
- RFC1122 says that the limit should be longer than 100 sec.
- It is too small number. Default value 15 corresponds to ~13-30min
- depending on RTO.
+ This value influences the timeout of an alive TCP connection,
+ when RTO retransmissions remain unacknowledged.
+ Given a value of N, a hypothetical TCP connection following
+ exponential backoff with an initial RTO of TCP_RTO_MIN would
+ retransmit N times before killing the connection at the (N+1)th RTO.
+
+ The default value of 15 yields a hypothetical timeout of 924.6
+ seconds and is a lower bound for the effective timeout.
+ TCP will effectively time out at the first RTO which exceeds the
+ hypothetical timeout.
+
+ RFC 1122 recommends at least 100 seconds for the timeout,
+ which corresponds to a value of at least 8.
tcp_rfc1337 - BOOLEAN
If set, the TCP stack behaves conforming to RFC1337. If unset,
@@ -1282,6 +1297,16 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
sctp_wmem - vector of 3 INTEGERs: min, default, max
See tcp_wmem for a description.
+addr_scope_policy - INTEGER
+ Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00
+
+ 0 - Disable IPv4 address scoping
+ 1 - Enable IPv4 address scoping
+ 2 - Follow draft but allow IPv4 private addresses
+ 3 - Follow draft but allow IPv4 link local addresses
+
+ Default: 1
+
/proc/sys/net/core/*
dev_weight - INTEGER