diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-11-02 06:20:58 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-11-02 06:20:58 -0700 |
| commit | fc02cb2b37fe2cbf1d3334b9f0f0eab9431766c4 (patch) | |
| tree | 93b16bc48fdc3be4a1adccbf4c7de92a5e8440e1 /Documentation | |
| parent | bfc484fe6abba4b89ec9330e0e68778e2a9856b2 (diff) | |
| parent | 84882cf72cd774cf16fd338bdbf00f69ac9f9194 (diff) | |
Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
Diffstat (limited to 'Documentation')
35 files changed, 1611 insertions, 305 deletions
diff --git a/Documentation/ABI/testing/sysfs-timecard b/Documentation/ABI/testing/sysfs-timecard new file mode 100644 index 000000000000..97f6773794a5 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-timecard @@ -0,0 +1,174 @@ +What: /sys/class/timecard/ +Date: September 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: This directory contains files and directories + providing a standardized interface to the ancillary + features of the OpenCompute timecard. + +What: /sys/class/timecard/ocpN/ +Date: September 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: This directory contains the attributes of the Nth timecard + registered. + +What: /sys/class/timecard/ocpN/available_clock_sources +Date: September 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RO) The list of available time sources that the PHC + uses for clock adjustments. + + ==== ================================================= + NONE no adjustments + PPS adjustments come from the PPS1 selector (default) + TOD adjustments from the GNSS/TOD module + IRIG adjustments from external IRIG-B signal + DCF adjustments from external DCF signal + ==== ================================================= + +What: /sys/class/timecard/ocpN/available_sma_inputs +Date: September 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RO) Set of available destinations (sinks) for a SMA + input signal. + + ===== ================================================ + 10Mhz signal is used as the 10Mhz reference clock + PPS1 signal is sent to the PPS1 selector + PPS2 signal is sent to the PPS2 selector + TS1 signal is sent to timestamper 1 + TS2 signal is sent to timestamper 2 + IRIG signal is sent to the IRIG-B module + DCF signal is sent to the DCF module + ===== ================================================ + +What: /sys/class/timecard/ocpN/available_sma_outputs +Date: May 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RO) Set of available sources for a SMA output signal. + + ===== ================================================ + 10Mhz output is from the 10Mhz reference clock + PHC output PPS is from the PHC clock + MAC output PPS is from the Miniature Atomic Clock + GNSS output PPS is from the GNSS module + GNSS2 output PPS is from the second GNSS module + IRIG output is from the PHC, in IRIG-B format + DCF output is from the PHC, in DCF format + ===== ================================================ + +What: /sys/class/timecard/ocpN/clock_source +Date: September 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RW) Contains the current synchronization source used by + the PHC. May be changed by writing one of the listed + values from the available_clock_sources attribute set. + +What: /sys/class/timecard/ocpN/gnss_sync +Date: September 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RO) Indicates whether a valid GNSS signal is received, + or when the signal was lost. + +What: /sys/class/timecard/ocpN/i2c +Date: September 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: This optional attribute links to the associated i2c device. + +What: /sys/class/timecard/ocpN/irig_b_mode +Date: September 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RW) An integer from 0-7 indicating the timecode format + of the IRIG-B output signal: B00<n> + +What: /sys/class/timecard/ocpN/pps +Date: September 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: This optional attribute links to the associated PPS device. + +What: /sys/class/timecard/ocpN/ptp +Date: September 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: This attribute links to the associated PTP device. + +What: /sys/class/timecard/ocpN/serialnum +Date: September 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RO) Provides the serial number of the timecard. + +What: /sys/class/timecard/ocpN/sma1 +What: /sys/class/timecard/ocpN/sma2 +What: /sys/class/timecard/ocpN/sma3 +What: /sys/class/timecard/ocpN/sma4 +Date: September 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RW) These attributes specify the direction of the signal + on the associated SMA connectors, and also the signal sink + or source. + + The display format of the attribute is a space separated + list of signals, prefixed by the input/output direction. + + The signal direction may be changed (if supported) by + prefixing the signal list with either "in:" or "out:". + If neither prefix is present, then the direction is unchanged. + + The output signal may be changed by writing one of the listed + values from the available_sma_outputs attribute set. + + The input destinations may be changed by writing multiple + values from the available_sma_inputs attribute set, + separated by spaces. If there are duplicated input + destinations between connectors, the lowest numbered SMA + connector is given priority. + + Note that not all input combinations may make sense. + + The 10Mhz reference clock input is currently only valid + on SMA1 and may not be combined with other destination sinks. + +What: /sys/class/timecard/ocpN/ts_window_adjust +Date: September 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RW) When retrieving the PHC with the PTP SYS_OFFSET_EXTENDED + ioctl, a system timestamp is made before and after the PHC + time is retrieved. The midpoint between the two system + timestamps is usually taken to be the SYS time associated + with the PHC time. This estimate may be wrong, as it depends + on PCI latencies, and when the PHC time was latched + + The attribute value reduces the end timestamp by the given + number of nanoseconds, so the computed midpoint matches the + retrieved PHC time. + + The initial value is set based on measured PCI latency and + the estimated point where the FPGA latches the PHC time. This + value may be changed by writing an unsigned integer. + +What: /sys/class/timecard/ocpN/ttyGNSS +What: /sys/class/timecard/ocpN/ttyGNSS2 +Date: September 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: These optional attributes link to the TTY serial ports + associated with the GNSS devices. + +What: /sys/class/timecard/ocpN/ttyMAC +Date: September 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: This optional attribute links to the TTY serial port + associated with the Miniature Atomic Clock. + +What: /sys/class/timecard/ocpN/ttyNMEA +Date: September 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: This optional attribute links to the TTY serial port + which outputs the PHC time in NMEA ZDA format. + +What: /sys/class/timecard/ocpN/utc_tai_offset +Date: September 2021 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RW) The DCF and IRIG output signals are in UTC, while the + TimeCard operates on TAI. This attribute allows setting the + offset in seconds, which is added to the TAI timebase for + these formats. + + The offset may be changed by writing an unsigned integer. diff --git a/Documentation/bpf/bpf_licensing.rst b/Documentation/bpf/bpf_licensing.rst new file mode 100644 index 000000000000..b19c433f41d2 --- /dev/null +++ b/Documentation/bpf/bpf_licensing.rst @@ -0,0 +1,92 @@ +============= +BPF licensing +============= + +Background +========== + +* Classic BPF was BSD licensed + +"BPF" was originally introduced as BSD Packet Filter in +http://www.tcpdump.org/papers/bpf-usenix93.pdf. The corresponding instruction +set and its implementation came from BSD with BSD license. That original +instruction set is now known as "classic BPF". + +However an instruction set is a specification for machine-language interaction, +similar to a programming language. It is not a code. Therefore, the +application of a BSD license may be misleading in a certain context, as the +instruction set may enjoy no copyright protection. + +* eBPF (extended BPF) instruction set continues to be BSD + +In 2014, the classic BPF instruction set was significantly extended. We +typically refer to this instruction set as eBPF to disambiguate it from cBPF. +The eBPF instruction set is still BSD licensed. + +Implementations of eBPF +======================= + +Using the eBPF instruction set requires implementing code in both kernel space +and user space. + +In Linux Kernel +--------------- + +The reference implementations of the eBPF interpreter and various just-in-time +compilers are part of Linux and are GPLv2 licensed. The implementation of +eBPF helper functions is also GPLv2 licensed. Interpreters, JITs, helpers, +and verifiers are called eBPF runtime. + +In User Space +------------- + +There are also implementations of eBPF runtime (interpreter, JITs, helper +functions) under +Apache2 (https://github.com/iovisor/ubpf), +MIT (https://github.com/qmonnet/rbpf), and +BSD (https://github.com/DPDK/dpdk/blob/main/lib/librte_bpf). + +In HW +----- + +The HW can choose to execute eBPF instruction natively and provide eBPF runtime +in HW or via the use of implementing firmware with a proprietary license. + +In other operating systems +-------------------------- + +Other kernels or user space implementations of eBPF instruction set and runtime +can have proprietary licenses. + +Using BPF programs in the Linux kernel +====================================== + +Linux Kernel (while being GPLv2) allows linking of proprietary kernel modules +under these rules: +Documentation/process/license-rules.rst + +When a kernel module is loaded, the linux kernel checks which functions it +intends to use. If any function is marked as "GPL only," the corresponding +module or program has to have GPL compatible license. + +Loading BPF program into the Linux kernel is similar to loading a kernel +module. BPF is loaded at run time and not statically linked to the Linux +kernel. BPF program loading follows the same license checking rules as kernel +modules. BPF programs can be proprietary if they don't use "GPL only" BPF +helper functions. + +Further, some BPF program types - Linux Security Modules (LSM) and TCP +Congestion Control (struct_ops), as of Aug 2021 - are required to be GPL +compatible even if they don't use "GPL only" helper functions directly. The +registration step of LSM and TCP congestion control modules of the Linux +kernel is done through EXPORT_SYMBOL_GPL kernel functions. In that sense LSM +and struct_ops BPF programs are implicitly calling "GPL only" functions. +The same restriction applies to BPF programs that call kernel functions +directly via unstable interface also known as "kfunc". + +Packaging BPF programs with user space applications +==================================================== + +Generally, proprietary-licensed applications and GPL licensed BPF programs +written for the Linux kernel in the same package can co-exist because they are +separate executable processes. This applies to both cBPF and eBPF programs. diff --git a/Documentation/bpf/btf.rst b/Documentation/bpf/btf.rst index 846354cd2d69..9ad4218a751f 100644 --- a/Documentation/bpf/btf.rst +++ b/Documentation/bpf/btf.rst @@ -85,6 +85,7 @@ sequentially and type id is assigned to each recognized type starting from id #define BTF_KIND_VAR 14 /* Variable */ #define BTF_KIND_DATASEC 15 /* Section */ #define BTF_KIND_FLOAT 16 /* Floating point */ + #define BTF_KIND_DECL_TAG 17 /* Decl Tag */ Note that the type section encodes debug info, not just pure types. ``BTF_KIND_FUNC`` is not a type, and it represents a defined subprogram. @@ -106,7 +107,7 @@ Each type contains the following common data:: * "size" tells the size of the type it is describing. * * "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT, - * FUNC and FUNC_PROTO. + * FUNC, FUNC_PROTO and DECL_TAG. * "type" is a type_id referring to another type. */ union { @@ -465,6 +466,32 @@ map definition. No additional type data follow ``btf_type``. +2.2.17 BTF_KIND_DECL_TAG +~~~~~~~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: offset to a non-empty string + * ``info.kind_flag``: 0 + * ``info.kind``: BTF_KIND_DECL_TAG + * ``info.vlen``: 0 + * ``type``: ``struct``, ``union``, ``func``, ``var`` or ``typedef`` + +``btf_type`` is followed by ``struct btf_decl_tag``.:: + + struct btf_decl_tag { + __u32 component_idx; + }; + +The ``name_off`` encodes btf_decl_tag attribute string. +The ``type`` should be ``struct``, ``union``, ``func``, ``var`` or ``typedef``. +For ``var`` or ``typedef`` type, ``btf_decl_tag.component_idx`` must be ``-1``. +For the other three types, if the btf_decl_tag attribute is +applied to the ``struct``, ``union`` or ``func`` itself, +``btf_decl_tag.component_idx`` must be ``-1``. Otherwise, +the attribute is applied to a ``struct``/``union`` member or +a ``func`` argument, and ``btf_decl_tag.component_idx`` should be a +valid index (starting from 0) pointing to a member or an argument. + 3. BTF Kernel API ***************** diff --git a/Documentation/bpf/index.rst b/Documentation/bpf/index.rst index 1ceb5d704a97..37f273a7e8b6 100644 --- a/Documentation/bpf/index.rst +++ b/Documentation/bpf/index.rst @@ -82,6 +82,15 @@ Testing and debugging BPF s390 +Licensing +========= + +.. toctree:: + :maxdepth: 1 + + bpf_licensing + + Other ===== diff --git a/Documentation/bpf/libbpf/libbpf_naming_convention.rst b/Documentation/bpf/libbpf/libbpf_naming_convention.rst index 9c68d5014ff1..f86360f734a8 100644 --- a/Documentation/bpf/libbpf/libbpf_naming_convention.rst +++ b/Documentation/bpf/libbpf/libbpf_naming_convention.rst @@ -150,6 +150,46 @@ mirror of the mainline's version of libbpf for a stand-alone build. However, all changes to libbpf's code base must be upstreamed through the mainline kernel tree. + +API documentation convention +============================ + +The libbpf API is documented via comments above definitions in +header files. These comments can be rendered by doxygen and sphinx +for well organized html output. This section describes the +convention in which these comments should be formated. + +Here is an example from btf.h: + +.. code-block:: c + + /** + * @brief **btf__new()** creates a new instance of a BTF object from the raw + * bytes of an ELF's BTF section + * @param data raw bytes + * @param size number of bytes passed in `data` + * @return new BTF object instance which has to be eventually freed with + * **btf__free()** + * + * On error, error-code-encoded-as-pointer is returned, not a NULL. To extract + * error code from such a pointer `libbpf_get_error()` should be used. If + * `libbpf_set_strict_mode(LIBBPF_STRICT_CLEAN_PTRS)` is enabled, NULL is + * returned on error instead. In both cases thread-local `errno` variable is + * always set to error code as well. + */ + +The comment must start with a block comment of the form '/\*\*'. + +The documentation always starts with a @brief directive. This line is a short +description about this API. It starts with the name of the API, denoted in bold +like so: **api_name**. Please include an open and close parenthesis if this is a +function. Follow with the short description of the API. A longer form description +can be added below the last directive, at the bottom of the comment. + +Parameters are denoted with the @param directive, there should be one for each +parameter. If this is a function with a non-void return, use the @return directive +to document it. + License ------------------- diff --git a/Documentation/devicetree/bindings/net/asix,ax88796c.yaml b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml new file mode 100644 index 000000000000..699ebf452479 --- /dev/null +++ b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/asix,ax88796c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASIX AX88796C SPI Ethernet Adapter + +maintainers: + - Łukasz Stelmach <l.stelmach@samsung.com> + +description: | + ASIX AX88796C is an Ethernet controller with a built in PHY. This + describes SPI mode of the chip. + + The node for this driver must be a child node of an SPI controller, + hence all mandatory properties described in + ../spi/spi-controller.yaml must be specified. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: asix,ax88796c + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 40000000 + + interrupts: + maxItems: 1 + + reset-gpios: + description: + A GPIO line handling reset of the chip. As the line is active low, + it should be marked GPIO_ACTIVE_LOW. + maxItems: 1 + + local-mac-address: true + + mac-address: true + +required: + - compatible + - reg + - spi-max-frequency + - interrupts + - reset-gpios + +additionalProperties: false + +examples: + # Artik5 eval board + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@0 { + compatible = "asix,ax88796c"; + reg = <0x0>; + local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ + interrupt-parent = <&gpx2>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <40000000>; + reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt index 33a0d67e4ce5..0b5994fba35f 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt @@ -2,7 +2,8 @@ Required properties: - compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2", - "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5", "brcm,bcm2711-genet-v5". + "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5", "brcm,bcm2711-genet-v5" or + "brcm,bcm7712-genet-v5". - reg: address and length of the register set for the device - interrupts and/or interrupts-extended: must be two cells, the first cell is the general purpose interrupt line, while the second cell is the diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index 16aa192c118e..2ad7f79ad371 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -46,6 +46,9 @@ patternProperties: type: object description: Ethernet switch ports + allOf: + - $ref: "http://devicetree.org/schemas/net/ethernet-controller.yaml#" + properties: reg: description: Port number @@ -73,11 +76,14 @@ patternProperties: dsa-tag-protocol: description: Instead of the default, the switch will use this tag protocol if - possible. Useful when a device supports multiple protcols and + possible. Useful when a device supports multiple protocols and the default is incompatible with the Ethernet device. enum: - dsa - edsa + - ocelot + - ocelot-8021q + - seville phy-handle: true @@ -91,6 +97,10 @@ patternProperties: managed: true + rx-internal-delay-ps: true + + tx-internal-delay-ps: true + required: - reg diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml index f978f8719d8e..24cd733c11d1 100644 --- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml @@ -74,10 +74,42 @@ properties: - compatible - reg +patternProperties: + "^(ethernet-)?ports$": + patternProperties: + "^(ethernet-)?port@[0-9]+$": + allOf: + - if: + properties: + phy-mode: + contains: + enum: + - rgmii + - rgmii-rxid + - rgmii-txid + - rgmii-id + then: + properties: + rx-internal-delay-ps: + $ref: "#/$defs/internal-delay-ps" + tx-internal-delay-ps: + $ref: "#/$defs/internal-delay-ps" + required: - compatible - reg +$defs: + internal-delay-ps: + description: + Disable tunable delay lines using 0 ps, or enable them and select + the phase between 1640 ps (73.8 degree shift at 1Gbps) and 2260 ps + (101.7 degree shift) in increments of 0.9 degrees (20 ps). + enum: + [0, 1640, 1660, 1680, 1700, 1720, 1740, 1760, 1780, 1800, 1820, 1840, + 1860, 1880, 1900, 1920, 1940, 1960, 1980, 2000, 2020, 2040, 2060, 2080, + 2100, 2120, 2140, 2160, 2180, 2200, 2220, 2240, 2260] + unevaluatedProperties: false examples: @@ -97,29 +129,40 @@ examples: port@0 { phy-handle = <&rgmii_phy6>; phy-mode = "rgmii-id"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; reg = <0>; }; port@1 { phy-handle = <&rgmii_phy3>; phy-mode = "rgmii-id"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; reg = <1>; }; port@2 { phy-handle = <&rgmii_phy4>; phy-mode = "rgmii-id"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; reg = <2>; }; port@3 { + phy-handle = <&rgmii_phy4>; phy-mode = "rgmii-id"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; reg = <3>; }; port@4 { ethernet = <&enet2>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; reg = <4>; fixed-link { diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt deleted file mode 100644 index 8c73f67c43ca..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt +++ /dev/null @@ -1,215 +0,0 @@ -* Qualcomm Atheros QCA8xxx switch family - -Required properties: - -- compatible: should be one of: - "qca,qca8327" - "qca,qca8334" - "qca,qca8337" - -- #size-cells: must be 0 -- #address-cells: must be 1 - -Optional properties: - -- reset-gpios: GPIO to be used to reset the whole device - -Subnodes: - -The integrated switch subnode should be specified according to the binding -described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external -mdio-bus each subnode describing a port needs to have a valid phandle -referencing the internal PHY it is connected to. This is because there's no -N:N mapping of port and PHY id. -To declare the internal mdio-bus configuration, declare a mdio node in the -switch node and declare the phandle for the port referencing the internal -PHY is connected to. In this config a internal mdio-bus is registered and -the mdio MASTER is used as communication. - -Don't use mixed external and internal mdio-bus configurations, as this is -not supported by the hardware. - -The CPU port of this switch is always port 0. - -A CPU port node has the following optional node: - -- fixed-link : Fixed-link subnode describing a link to a non-MDIO - managed entity. See - Documentation/devicetree/bindings/net/fixed-link.txt - for details. - -For QCA8K the 'fixed-link' sub-node supports only the following properties: - -- 'speed' (integer, mandatory), to indicate the link speed. Accepted - values are 10, 100 and 1000 -- 'full-duplex' (boolean, optional), to indicate that full duplex is - used. When absent, half duplex is assumed. - -Examples: - -for the external mdio-bus configuration: - - &mdio0 { - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - - reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - fixed-link { - speed = 1000; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-handle = <&phy_port5>; - }; - }; - }; - }; - -for the internal master mdio-bus configuration: - - &mdio0 { - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - - reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - fixed-link { - speed = 1000; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml new file mode 100644 index 000000000000..48de0ace265d --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml @@ -0,0 +1,362 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/qca8k.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Atheros QCA83xx switch family + +maintainers: + - John Crispin <john@phrozen.org> + +description: + If the QCA8K switch is connect to an SoC's external mdio-bus, each subnode + describing a port needs to have a valid phandle referencing the internal PHY + it is connected to. This is because there is no N:N mapping of port and PHY + ID. To declare the internal mdio-bus configuration, declare an MDIO node in + the switch node and declare the phandle for the port, referencing the internal + PHY it is connected to. In this config, an internal mdio-bus is registered and + the MDIO master is used for communication. Mixed external and internal + mdio-bus configurations are not supported by the hardware. + +properties: + compatible: + oneOf: + - enum: + - qca,qca8327 + - qca,qca8328 + - qca,qca8334 + - qca,qca8337 + description: | + qca,qca8328: referenced as AR8328(N)-AK1(A/B) QFN 176 pin package + qca,qca8327: referenced as AR8327(N)-AL1A DR-QFN 148 pin package + qca,qca8334: referenced as QCA8334-AL3C QFN 88 pin package + qca,qca8337: referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package + + reg: + maxItems: 1 + + reset-gpios: + description: + GPIO to be used to reset the whole device + maxItems: 1 + + qca,ignore-power-on-sel: + $ref: /schemas/types.yaml#/definitions/flag + description: + Ignore power-on pin strapping to configure LED open-drain or EEPROM + presence. This is needed for devices with incorrect configuration or when + the OEM has decided not to use pin strapping and falls back to SW regs. + + qca,led-open-drain: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set LEDs to open-drain mode. This requires the qca,ignore-power-on-sel to + be set, otherwise the driver will fail at probe. This is required if the + OEM does not use pin strapping to set this mode and prefers to set it + using SW regs. The pin strappings related to LED open-drain mode are + B68 on the QCA832x and B49 on the QCA833x. + + mdio: + type: object + description: Qca8k switch have an internal mdio to access switch port. + If this is not present, the legacy mapping is used and the + internal mdio access is used. + With the legacy mapping the reg corresponding to the internal + mdio is the switch reg with an offset of -1. + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + patternProperties: + "^(ethernet-)?phy@[0-4]$": + type: object + + allOf: + - $ref: "http://devicetree.org/schemas/net/mdio.yaml#" + + properties: + reg: + maxItems: 1 + + required: + - reg + +patternProperties: + "^(ethernet-)?ports$": + type: object + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + patternProperties: + "^(ethernet-)?port@[0-6]$": + type: object + description: Ethernet switch ports + + properties: + reg: + description: Port number + + label: + description: + Describes the label associated with this port, which will become + the netdev name + $ref: /schemas/types.yaml#/definitions/string + + link: + description: + Should be a list of phandles to other switch's DSA port. This + port is used as the outgoing port towards the phandle ports. The + full routing information must be given, not just the one hop + routes to neighbouring switches + $ref: /schemas/types.yaml#/definitions/phandle-array + + ethernet: + description: + Should be a phandle to a valid Ethernet device node. This host + device is what the switch port is connected to + $ref: /schemas/types.yaml#/definitions/phandle + + phy-handle: true + + phy-mode: true + + fixed-link: true + + mac-address: true + + sfp: true + + qca,sgmii-rxclk-falling-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set the receive clock phase to falling edge. Mostly commonly used on + the QCA8327 with CPU port 0 set to SGMII. + + qca,sgmii-txclk-falling-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set the transmit clock phase to falling edge. + + qca,sgmii-enable-pll: + $ref: /schemas/types.yaml#/definitions/flag + description: + For SGMII CPU port, explicitly enable PLL, TX and RX chain along with + Signal Detection. On the QCA8327 this should not be enabled, otherwise + the SGMII port will not initialize. When used on the QCA8337, revision 3 + or greater, a warning will be displayed. When the CPU port is set to + SGMII on the QCA8337, it is advised to set this unless a communication + issue is observed. + + required: + - reg + + additionalProperties: false + +oneOf: + - required: + - ports + - required: + - ethernet-ports + +required: + - compatible + - reg + +additionalProperties: true + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + external_phy_port1: ethernet-phy@0 { + reg = <0>; + }; + + external_phy_port2: ethernet-phy@1 { + reg = <1>; + }; + + external_phy_port3: ethernet-phy@2 { + reg = <2>; + }; + + external_phy_port4: ethernet-phy@3 { + reg = <3>; + }; + + external_phy_port5: ethernet-phy@4 { + reg = <4>; + }; + + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&external_phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-handle = <&external_phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan3"; + phy-handle = <&external_phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan4"; + phy-handle = <&external_phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-handle = <&external_phy_port5>; + }; + }; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&internal_phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&internal_phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&internal_phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&internal_phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&internal_phy_port5>; + }; + + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "sgmii"; + + qca,sgmii-rxclk-falling-edge; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + internal_phy_port1: ethernet-phy@0 { + reg = <0>; + }; + + internal_phy_port2: ethernet-phy@1 { + reg = <1>; + }; + + internal_phy_port3: ethernet-phy@2 { + reg = <2>; + }; + + internal_phy_port4: ethernet-phy@3 { + reg = <3>; + }; + + internal_phy_port5: ethernet-phy@4 { + reg = <4>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt b/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt index b6ae8541bd55..7959ec237983 100644 --- a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt +++ b/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt @@ -9,6 +9,7 @@ SMI-based Realtek devices. Required properties: - compatible: must be exactly one of: + "realtek,rtl8365mb" (4+1 ports) "realtek,rtl8366" "realtek,rtl8366rb" (4+1 ports) "realtek,rtl8366s" (4+1 ports) @@ -62,6 +63,8 @@ and subnodes of DSA switches. Examples: +An example for the RTL8366RB: + switch { compatible = "realtek,rtl8366rb"; /* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */ @@ -151,3 +154,87 @@ switch { }; }; }; + +An example for the RTL8365MB-VC: + +switch { + compatible = "realtek,rtl8365mb"; + mdc-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; + mdio-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + + switch_intc: interrupt-controller { + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + port@0 { + reg = <0>; + label = "swp0"; + phy-handle = <ðphy0>; + }; + port@1 { + reg = <1>; + label = "swp1"; + phy-handle = <ðphy1>; + }; + port@2 { + reg = <2>; + label = "swp2"; + phy-handle = <ðphy2>; + }; + port@3 { + reg = <3>; + label = "swp3"; + phy-handle = <ðphy3>; + }; + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&fec1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <2000>; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + + mdio { + compatible = "realtek,smi-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: phy@0 { + reg = <0>; + interrupt-parent = <&switch_intc>; + interrupts = <0>; + }; + ethphy1: phy@1 { + reg = <1>; + interrupt-parent = <&switch_intc>; + interrupts = <1>; + }; + ethphy2: phy@2 { + reg = <2>; + interrupt-parent = <&switch_intc>; + interrupts = <2>; + }; + ethphy3: phy@3 { + reg = <3>; + interrupt-parent = <&switch_intc>; + interrupts = <3>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml b/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml new file mode 100644 index 000000000000..437502c5ca96 --- /dev/null +++ b/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq Xway ETOP Ethernet driver + +maintainers: + - John Crispin <john@phrozen.org> + +properties: + $nodename: + pattern: "^ethernet@[0-9a-f]+$" + + compatible: + const: lantiq,etop-xway + + reg: + maxItems: 1 + + interrupts: + items: + - description: TX interrupt + - description: RX interrupt + + interrupt-names: + items: + - const: tx + - const: rx + + lantiq,tx-burst-length: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + TX programmable burst length. + enum: [2, 4, 8] + + lantiq,rx-burst-length: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + RX programmable burst length. + enum: [2, 4, 8] + + phy-mode: true + +required: + - compatible + - reg + - interrupt-parent + - interrupts + - interrupt-names + - lantiq,tx-burst-length + - lantiq,rx-burst-length + - phy-mode + +additionalProperties: false + +examples: + - | + ethernet@e180000 { + compatible = "lantiq,etop-xway"; + reg = <0xe180000 0x40000>; + interrupt-parent = <&icu0>; + interrupts = <73>, <78>; + interrupt-names = "tx", "rx"; + lantiq,tx-burst-length = <8>; + lantiq,rx-burst-length = <8>; + phy-mode = "rmii"; + }; diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt deleted file mode 100644 index 5ff5e68bbbb6..000000000000 --- a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt +++ /dev/null @@ -1,21 +0,0 @@ -Lantiq xRX200 GSWIP PMAC Ethernet driver -================================== - -Required properties: - -- compatible : "lantiq,xrx200-net" for the PMAC of the embedded - : GSWIP in the xXR200 -- reg : memory range of the PMAC core inside of the GSWIP core -- interrupts : TX and RX DMA interrupts. Use interrupt-names "tx" for - : the TX interrupt and "rx" for the RX interrupt. - -Example: - -ethernet@e10b308 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-net"; - reg = <0xe10b308 0xcf8>; - interrupts = <73>, <72>; - interrupt-names = "tx", "rx"; -}; diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml new file mode 100644 index 000000000000..7bc074a42369 --- /dev/null +++ b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/lantiq,xrx200-net.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq xRX200 GSWIP PMAC Ethernet driver + +maintainers: + - Hauke Mehrtens <hauke@hauke-m.de> + +properties: + $nodename: + pattern: "^ethernet@[0-9a-f]+$" + + compatible: + const: lantiq,xrx200-net + + reg: + maxItems: 1 + + interrupts: + items: + - description: TX interrupt + - description: RX interrupt + + interrupt-names: + items: + - const: tx + - const: rx + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + - interrupt-parent + - interrupts + - interrupt-names + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + ethernet@e10b308 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-net"; + reg = <0xe10b308 0xcf8>; + interrupt-parent = <&icu0>; + interrupts = <73>, <72>; + interrupt-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index af9df2f01a1c..a1b06fd1962e 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -30,6 +30,10 @@ Required properties: Optional elements: 'tsu_clk' - clocks: Phandles to input clocks. +Optional properties: +- mdio: node containing PHY children. If this node is not present, then PHYs + will be direct children. + The MAC address will be determined using the optional properties defined in ethernet.txt. diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml index 948677ade6d1..d7748dd33199 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml @@ -51,6 +51,9 @@ examples: switch@10 { compatible = "qca,qca8337"; reg = <0x10>; - /* ... */ + + ports { + /* ... */ + }; }; }; diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml index c101a1ec846e..06b38c9bc6ec 100644 --- a/Documentation/devicetree/bindings/net/renesas,ether.yaml +++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml @@ -100,15 +100,18 @@ additionalProperties: false examples: # Lager board - | - #include <dt-bindings/clock/r8a7790-clock.h> - #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/r8a7790-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7790-sysc.h> + #include <dt-bindings/gpio/gpio.h> ethernet@ee700000 { compatible = "renesas,ether-r8a7790", "renesas,rcar-gen2-ether"; reg = <0xee700000 0x400>; - interrupt-parent = <&gic>; - interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp8_clks R8A7790_CLK_ETHER>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 813>; phy-mode = "rmii"; phy-handle = <&phy1>; renesas,ether-link-active-low; @@ -116,8 +119,12 @@ examples: #size-cells = <0>; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml index 4c927d2c17d3..bda821065a2b 100644 --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -287,6 +287,7 @@ examples: "ch13", "ch14", "ch15", "ch16", "ch17", "ch18", "ch19", "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; + clock-names = "fck"; iommus = <&ipmmu_ds0 16>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 812>; @@ -298,6 +299,8 @@ examples: #size-cells = <0>; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml index 8a03a24a2019..6bc61c42418f 100644 --- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml @@ -24,6 +24,7 @@ properties: - socionext,uniphier-ld11-ave4 - socionext,uniphier-ld20-ave4 - socionext,uniphier-pxs3-ave4 + - socionext,uniphier-nx1-ave4 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml index 3e2c2e43175e..1489d3c1cd6e 100644 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml @@ -47,6 +47,11 @@ properties: ieee80211-freq-limit: true + mediatek,eeprom-data: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + EEPROM data embedded as array. + mediatek,mtd-eeprom: $ref: /schemas/types.yaml#/definitions/phandle-array description: diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt deleted file mode 100644 index aaaeeb5f935b..000000000000 --- a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt +++ /dev/null @@ -1,48 +0,0 @@ -* Qualcomm Atheros ath9k wireless devices - -This node provides properties for configuring the ath9k wireless device. The -node is expected to be specified as a child node of the PCI controller to -which the wireless chip is connected. - -Required properties: -- compatible: For PCI and PCIe devices this should be an identifier following - the format as defined in "PCI Bus Binding to Open Firmware" - Revision 2.1. One of the possible formats is "pciVVVV,DDDD" - where VVVV is the PCI vendor ID and DDDD is PCI device ID. - Typically QCA's PCI vendor ID 168c is used while the PCI device - ID depends on the chipset - see the following (possibly - incomplete) list: - - 0023 for AR5416 - - 0024 for AR5418 - - 0027 for AR9160 - - 0029 for AR9220 and AR9223 - - 002a for AR9280 and AR9283 - - 002b for AR9285 - - 002c for AR2427 - - 002d for AR9227 - - 002e for AR9287 - - 0030 for AR9380, AR9381 and AR9382 - - 0032 for AR9485 - - 0033 for AR9580 and AR9590 - - 0034 for AR9462 - - 0036 for AR9565 - - 0037 for AR9485 -- reg: Address and length of the register set for the device. - -Optional properties: -- qca,no-eeprom: Indicates that there is no physical EEPROM connected to the - ath9k wireless chip (in this case the calibration / - EEPROM data will be loaded from userspace using the - kernel firmware loader). - -The MAC address will be determined using the optional properties defined in -net/ethernet.txt. - -In this example, the node is defined as child node of the PCI controller: -&pci0 { - wifi@168c,002d { - compatible = "pci168c,002d"; - reg = <0x7000 0 0 0 0x1000>; - qca,no-eeprom; - }; -}; diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml new file mode 100644 index 000000000000..8cd0adbf7021 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/qca,ath9k.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Atheros ath9k wireless devices Generic Binding + +maintainers: + - Kalle Valo <kvalo@codeaurora.org> + +description: | + This node provides properties for configuring the ath9k wireless device. + The node is expected to be specified as a child node of the PCI controller + to which the wireless chip is connected. + +allOf: + - $ref: ieee80211.yaml# + +properties: + compatible: + enum: + - pci168c,0023 # AR5416 + - pci168c,0024 # AR5418 + - pci168c,0027 # AR9160 + - pci168c,0029 # AR9220 and AR9223 + - pci168c,002a # AR9280 and AR9283 + - pci168c,002b # AR9285 + - pci168c,002c # AR2427 - 802.11n bonded out + - pci168c,002d # AR9227 + - pci168c,002e # AR9287 + - pci168c,0030 # AR9380, AR9381 and AR9382 + - pci168c,0032 # AR9485 + - pci168c,0033 # AR9580 and AR9590 + - pci168c,0034 # AR9462 + - pci168c,0036 # AR9565 + - pci168c,0037 # AR1111 and AR9485 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + ieee80211-freq-limit: true + + qca,no-eeprom: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates that there is no physical EEPROM connected + + nvmem-cells: + items: + - description: Reference to an nvmem node for the MAC address + - description: Reference to an nvmem node for calibration data + + nvmem-cell-names: + items: + - const: mac-address + - const: calibration + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pcie0 { + #address-cells = <3>; + #size-cells = <2>; + wifi@0,0 { + compatible = "pci168c,002d"; + reg = <0 0 0 0 0>; + interrupts = <3>; + qca,no-eeprom; + }; + }; + - | + pci0 { + #address-cells = <3>; + #size-cells = <2>; + wifi@0,11 { + compatible = "pci168c,0029"; + reg = <0x8800 0 0 0 0>; + nvmem-cells = <&macaddr_art_c>, <&cal_art_1000>; + nvmem-cell-names = "mac-address", "calibration"; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 952553759ac4..0aa9e7676fcf 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -131,6 +131,8 @@ patternProperties: description: Asahi Kasei Corp. "^asc,.*": description: All Sensors Corporation + "^asix,.*": + description: ASIX Electronics Corporation "^aspeed,.*": description: ASPEED Technology Inc. "^asus,.*": diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5.rst index 4b59cf2c599f..5edf50d7dbd5 100644 --- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5.rst +++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5.rst @@ -543,6 +543,8 @@ The CR-space dump uses vsc interface which is valid even if the FW command interface is not functional, which is the case in most FW fatal errors. The recover function runs recover flow which reloads the driver and triggers fw reset if needed. +On firmware error, the health buffer is dumped into the dmesg. The log +level is derived from the error's severity (given in health buffer). User commands examples: @@ -700,3 +702,61 @@ Eswitch QoS tracepoints: $ cat /sys/kernel/debug/tracing/trace ... <...>-27418 [006] .... 76547.187258: mlx5_esw_group_qos_destroy: (0000:82:00.0) group=000000007b576bb3 tsar_ix=1 + +SF tracepoints: + +- mlx5_sf_add: trace addition of the SF port:: + + $ echo mlx5:mlx5_sf_add >> /sys/kernel/debug/tracing/set_event + $ cat /sys/kernel/debug/tracing/trace + ... + devlink-9363 [031] ..... 24610.188722: mlx5_sf_add: (0000:06:00.0) port_index=32768 controller=0 hw_id=0x8000 sfnum=88 + +- mlx5_sf_free: trace freeing of the SF port:: + + $ echo mlx5:mlx5_sf_free >> /sys/kernel/debug/tracing/set_event + $ cat /sys/kernel/debug/tracing/trace + ... + devlink-9830 [038] ..... 26300.404749: mlx5_sf_free: (0000:06:00.0) port_index=32768 controller=0 hw_id=0x8000 + +- mlx5_sf_hwc_alloc: trace allocating of the hardware SF context:: + + $ echo mlx5:mlx5_sf_hwc_alloc >> /sys/kernel/debug/tracing/set_event + $ cat /sys/kernel/debug/tracing/trace + ... + devlink-9775 [031] ..... 26296.385259: mlx5_sf_hwc_alloc: (0000:06:00.0) controller=0 hw_id=0x8000 sfnum=88 + +- mlx5_sf_hwc_free: trace freeing of the hardware SF context:: + + $ echo mlx5:mlx5_sf_hwc_free >> /sys/kernel/debug/tracing/set_event + $ cat /sys/kernel/debug/tracing/trace + ... + kworker/u128:3-9093 [046] ..... 24625.365771: mlx5_sf_hwc_free: (0000:06:00.0) hw_id=0x8000 + +- mlx5_sf_hwc_deferred_free : trace deferred freeing of the hardware SF context:: + + $ echo mlx5:mlx5_sf_hwc_deferred_free >> /sys/kernel/debug/tracing/set_event + $ cat /sys/kernel/debug/tracing/trace + ... + devlink-9519 [046] ..... 24624.400271: mlx5_sf_hwc_deferred_free: (0000:06:00.0) hw_id=0x8000 + +- mlx5_sf_vhca_event: trace SF vhca event and state:: + + $ echo mlx5:mlx5_sf_vhca_event >> /sys/kernel/debug/tracing/set_event + $ cat /sys/kernel/debug/tracing/trace + ... + kworker/u128:3-9093 [046] ..... 24625.365525: mlx5_sf_vhca_event: (0000:06:00.0) hw_id=0x8000 sfnum=88 vhca_state=1 + +- mlx5_sf_dev_add : trace SF device add event:: + + $ echo mlx5:mlx5_sf_dev_add>> /sys/kernel/debug/tracing/set_event + $ cat /sys/kernel/debug/tracing/trace + ... + kworker/u128:3-9093 [000] ..... 24616.524495: mlx5_sf_dev_add: (0000:06:00.0) sfdev=00000000fc5d96fd aux_id=4 hw_id=0x8000 sfnum=88 + +- mlx5_sf_dev_del : trace SF device delete event:: + + $ echo mlx5:mlx5_sf_dev_del >> /sys/kernel/debug/tracing/set_event + $ cat /sys/kernel/debug/tracing/trace + ... + kworker/u128:3-9093 [044] ..... 24624.400749: mlx5_sf_dev_del: (0000:06:00.0) sfdev=00000000fc5d96fd aux_id=4 hw_id=0x8000 sfnum=88 diff --git a/Documentation/networking/devlink/bnxt.rst b/Documentation/networking/devlink/bnxt.rst index 3dfd84ccb1c7..a4fb27663cd6 100644 --- a/Documentation/networking/devlink/bnxt.rst +++ b/Documentation/networking/devlink/bnxt.rst @@ -22,6 +22,8 @@ Parameters - Permanent * - ``msix_vec_per_pf_min`` - Permanent + * - ``enable_remote_dev_reset`` + - Runtime The ``bnxt`` driver also implements the following driver-specific parameters. diff --git a/Documentation/networking/devlink/devlink-region.rst b/Documentation/networking/devlink/devlink-region.rst index 58fe95e9a49d..f06dca9a1eb6 100644 --- a/Documentation/networking/devlink/devlink-region.rst +++ b/Documentation/networking/devlink/devlink-region.rst @@ -44,8 +44,8 @@ example usage # Show all of the exposed regions with region sizes: $ devlink region show - pci/0000:00:05.0/cr-space: size 1048576 snapshot [1 2] - pci/0000:00:05.0/fw-health: size 64 snapshot [1 2] + pci/0000:00:05.0/cr-space: size 1048576 snapshot [1 2] max 8 + pci/0000:00:05.0/fw-health: size 64 snapshot [1 2] max 8 # Delete a snapshot using: $ devlink region del pci/0000:00:05.0/cr-space snapshot 1 diff --git a/Documentation/networking/devlink/ice.rst b/Documentation/networking/devlink/ice.rst index 5d97cee9457b..59c78e9717d2 100644 --- a/Documentation/networking/devlink/ice.rst +++ b/Documentation/networking/devlink/ice.rst @@ -142,6 +142,10 @@ Users can request an immediate capture of a snapshot via the .. code:: shell + $ devlink region show + pci/0000:01:00.0/nvm-flash: size 10485760 snapshot [] max 1 + pci/0000:01:00.0/device-caps: size 4096 snapshot [] max 10 + $ devlink region new pci/0000:01:00.0/nvm-flash snapshot 1 $ devlink region dump pci/0000:01:00.0/nvm-flash snapshot 1 diff --git a/Documentation/networking/devlink/index.rst b/Documentation/networking/devlink/index.rst index 45b5f8b341df..443123772f44 100644 --- a/Documentation/networking/devlink/index.rst +++ b/Documentation/networking/devlink/index.rst @@ -47,3 +47,5 @@ parameters, info versions, and other features it supports. ti-cpsw-switch am65-nuss-cpsw-switch prestera + iosm + octeontx2 diff --git a/Documentation/networking/devlink/iosm.rst b/Documentation/networking/devlink/iosm.rst new file mode 100644 index 000000000000..6136181339aa --- /dev/null +++ b/Documentation/networking/devlink/iosm.rst @@ -0,0 +1,162 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +iosm devlink support +==================== + +This document describes the devlink features implemented by the ``iosm`` +device driver. + +Parameters +========== + +The ``iosm`` driver implements the following driver-specific parameters. + +.. list-table:: Driver-specific parameters implemented + :widths: 5 5 5 85 + + * - Name + - Type + - Mode + - Description + * - ``erase_full_flash`` + - u8 + - runtime + - erase_full_flash parameter is used to check if full erase is required for + the device during firmware flashing. + If set, Full nand erase command will be sent to the device. By default, + only conditional erase support is enabled. + + +Flash Update +============ + +The ``iosm`` driver implements support for flash update using the +``devlink-flash`` interface. + +It supports updating the device flash using a combined flash image which contains +the Bootloader images and other modem software images. + +The driver uses DEVLINK_SUPPORT_FLASH_UPDATE_COMPONENT to identify type of +firmware image that need to be flashed as requested by user space application. +Supported firmware image types. + +.. list-table:: Firmware Image types + :widths: 15 85 + + * - Name + - Description + * - ``PSI RAM`` + - Primary Signed Image + * - ``EBL`` + - External Bootloader + * - ``FLS`` + - Modem Software Image + +PSI RAM and EBL are the RAM images which are injected to the device when the +device is in BOOT ROM stage. Once this is successful, the actual modem firmware +image is flashed to the device. The modem software image contains multiple files +each having one secure bin file and at least one Loadmap/Region file. For flashing +these files, appropriate commands are sent to the modem device along with the +data required for flashing. The data like region count and address of each region +has to be passed to the driver using the devlink param command. + +If the device has to be fully erased before firmware flashing, user application +need to set the erase_full_flash parameter using devlink param command. +By default, conditional erase feature is supported. + +Flash Commands: +=============== +1) When modem is in Boot ROM stage, user can use below command to inject PSI RAM +image using devlink flash command. + +$ devlink dev flash pci/0000:02:00.0 file <PSI_RAM_File_name> + +2) If user want to do a full erase, below command need to be issued to set the +erase full flash param (To be set only if full erase required). + +$ devlink dev param set pci/0000:02:00.0 name erase_full_flash value true cmode runtime + +3) Inject EBL after the modem is in PSI stage. + +$ devlink dev flash pci/0000:02:00.0 file <EBL_File_name> + +4) Once EBL is injected successfully, then the actual firmware flashing takes +place. Below is the sequence of commands used for each of the firmware images. + +a) Flash secure bin file. + +$ devlink dev flash pci/0000:02:00.0 file <Secure_bin_file_name> + +b) Flashing the Loadmap/Region file + +$ devlink dev flash pci/0000:02:00.0 file <Load_map_file_name> + +Regions +======= + +The ``iosm`` driver supports dumping the coredump logs. + +In case a firmware encounters an exception, a snapshot will be taken by the +driver. Following regions are accessed for device internal data. + +.. list-table:: Regions implemented + :widths: 15 85 + + * - Name + - Description + * - ``report.json`` + - The summary of exception details logged as part of this region. + * - ``coredump.fcd`` + - This region contains the details related to the exception occurred in the + device (RAM dump). + * - ``cdd.log`` + - This region contains the logs related to the modem CDD driver. + * - ``eeprom.bin`` + - This region contains the eeprom logs. + * - ``bootcore_trace.bin`` + - This region contains the current instance of bootloader logs. + * - ``bootcore_prev_trace.bin`` + - This region contains the previous instance of bootloader logs. + + +Region commands +=============== + +$ devlink region show + +$ devlink region new pci/0000:02:00.0/report.json + +$ devlink region dump pci/0000:02:00.0/report.json snapshot 0 + +$ devlink region del pci/0000:02:00.0/report.json snapshot 0 + +$ devlink region new pci/0000:02:00.0/coredump.fcd + +$ devlink region dump pci/0000:02:00.0/coredump.fcd snapshot 1 + +$ devlink region del pci/0000:02:00.0/coredump.fcd snapshot 1 + +$ devlink region new pci/0000:02:00.0/cdd.log + +$ devlink region dump pci/0000:02:00.0/cdd.log snapshot 2 + +$ devlink region del pci/0000:02:00.0/cdd.log snapshot 2 + +$ devlink region new pci/0000:02:00.0/eeprom.bin + +$ devlink region dump pci/0000:02:00.0/eeprom.bin snapshot 3 + +$ devlink region del pci/0000:02:00.0/eeprom.bin snapshot 3 + +$ devlink region new pci/0000:02:00.0/bootcore_trace.bin + +$ devlink region dump pci/0000:02:00.0/bootcore_trace.bin snapshot 4 + +$ devlink region del pci/0000:02:00.0/bootcore_trace.bin snapshot 4 + +$ devlink region new pci/0000:02:00.0/bootcore_prev_trace.bin + +$ devlink region dump pci/0000:02:00.0/bootcore_prev_trace.bin snapshot 5 + +$ devlink region del pci/0000:02:00.0/bootcore_prev_trace.bin snapshot 5 diff --git a/Documentation/networking/devlink/octeontx2.rst b/Documentation/networking/devlink/octeontx2.rst new file mode 100644 index 000000000000..610de99b728a --- /dev/null +++ b/Documentation/networking/devlink/octeontx2.rst @@ -0,0 +1,42 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================= +octeontx2 devlink support +========================= + +This document describes the devlink features implemented by the ``octeontx2 AF, PF and VF`` +device drivers. + +Parameters +========== + +The ``octeontx2 PF and VF`` drivers implement the following driver-specific parameters. + +.. list-table:: Driver-specific parameters implemented + :widths: 5 5 5 85 + + * - Name + - Type + - Mode + - Description + * - ``mcam_count`` + - u16 + - runtime + - Select number of match CAM entries to be allocated for an interface. + The same is used for ntuple filters of the interface. Supported by + PF and VF drivers. + +The ``octeontx2 AF`` driver implements the following driver-specific parameters. + +.. list-table:: Driver-specific parameters implemented + :widths: 5 5 5 85 + + * - Name + - Type + - Mode + - Description + * - ``dwrr_mtu`` + - u32 + - runtime + - Use to set the quantum which hardware uses for scheduling among transmit queues. + Hardware uses weighted DWRR algorithm to schedule among all transmit queues. diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index d9b55b7a1a4d..7b598c7e3912 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -41,6 +41,11 @@ In the message structure descriptions below, if an attribute name is suffixed with "+", parent nest can contain multiple attributes of the same type. This implements an array of entries. +Attributes that need to be filled-in by device drivers and that are dumped to +user space based on whether they are valid or not should not use zero as a +valid value. This avoids the need to explicitly signal the validity of the +attribute in the device driver API. + Request header ============== @@ -179,7 +184,7 @@ according to message purpose: Userspace to kernel: - ===================================== ================================ + ===================================== ================================= ``ETHTOOL_MSG_STRSET_GET`` get string set ``ETHTOOL_MSG_LINKINFO_GET`` get link settings ``ETHTOOL_MSG_LINKINFO_SET`` set link settings @@ -213,7 +218,9 @@ Userspace to kernel: ``ETHTOOL_MSG_MODULE_EEPROM_GET`` read SFP module EEPROM ``ETHTOOL_MSG_STATS_GET`` get standard statistics ``ETHTOOL_MSG_PHC_VCLOCKS_GET`` get PHC virtual clocks info - ===================================== ================================ + ``ETHTOOL_MSG_MODULE_SET`` set transceiver module parameters + ``ETHTOOL_MSG_MODULE_GET`` get transceiver module parameters + ===================================== ================================= Kernel to userspace: @@ -252,6 +259,7 @@ Kernel to userspace: ``ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY`` read SFP module EEPROM ``ETHTOOL_MSG_STATS_GET_REPLY`` standard statistics ``ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY`` PHC virtual clocks info + ``ETHTOOL_MSG_MODULE_GET_REPLY`` transceiver module parameters ======================================== ================================= ``GET`` requests are sent by userspace applications to retrieve device @@ -520,6 +528,8 @@ Link extended states: power required from cable or module ``ETHTOOL_LINK_EXT_STATE_OVERHEAT`` The module is overheated + + ``ETHTOOL_LINK_EXT_STATE_MODULE`` Transceiver module issue ================================================ ============================================ Link extended substates: @@ -613,6 +623,14 @@ Link extended substates: ``ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE`` Cable test failure =================================================== ============================================ + Transceiver module issue substates: + + =================================================== ============================================ + ``ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY`` The CMIS Module State Machine did not reach + the ModuleReady state. For example, if the + module is stuck at ModuleFault state + =================================================== ============================================ + DEBUG_GET ========= @@ -1521,6 +1539,63 @@ Kernel response contents: ``ETHTOOL_A_PHC_VCLOCKS_INDEX`` s32 PHC index array ==================================== ====== ========================== +MODULE_GET +========== + +Gets transceiver module parameters. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_MODULE_HEADER`` nested request header + ===================================== ====== ========================== + +Kernel response contents: + + ====================================== ====== ========================== + ``ETHTOOL_A_MODULE_HEADER`` nested reply header + ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` u8 power mode policy + ``ETHTOOL_A_MODULE_POWER_MODE`` u8 operational power mode + ====================================== ====== ========================== + +The optional ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` attribute encodes the +transceiver module power mode policy enforced by the host. The default policy +is driver-dependent, but "auto" is the recommended default and it should be +implemented by new drivers and drivers where conformance to a legacy behavior +is not critical. + +The optional ``ETHTHOOL_A_MODULE_POWER_MODE`` attribute encodes the operational +power mode policy of the transceiver module. It is only reported when a module +is plugged-in. Possible values are: + +.. kernel-doc:: include/uapi/linux/ethtool.h + :identifiers: ethtool_module_power_mode + +MODULE_SET +========== + +Sets transceiver module parameters. + +Request contents: + + ====================================== ====== ========================== + ``ETHTOOL_A_MODULE_HEADER`` nested request header + ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` u8 power mode policy + ====================================== ====== ========================== + +When set, the optional ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` attribute is used +to set the transceiver module power policy enforced by the host. Possible +values are: + +.. kernel-doc:: include/uapi/linux/ethtool.h + :identifiers: ethtool_module_power_mode_policy + +For SFF-8636 modules, low power mode is forced by the host according to table +6-10 in revision 2.10a of the specification. + +For CMIS modules, low power mode is forced by the host according to table 6-12 +in revision 5.0 of the specification. + Request translation =================== @@ -1620,4 +1695,6 @@ are netlink only. n/a ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT`` n/a ``ETHTOOL_MSG_TUNNEL_INFO_GET`` n/a ``ETHTOOL_MSG_PHC_VCLOCKS_GET`` + n/a ``ETHTOOL_MSG_MODULE_GET`` + n/a ``ETHTOOL_MSG_MODULE_SET`` =================================== ===================================== diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index d91ab28718d4..c61cc0219f4c 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -989,14 +989,6 @@ tcp_challenge_ack_limit - INTEGER in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks) Default: 1000 -tcp_rx_skb_cache - BOOLEAN - Controls a per TCP socket cache of one skb, that might help - performance of some workloads. This might be dangerous - on systems with a lot of TCP sockets, since it increases - memory usage. - - Default: 0 (disabled) - UDP variables ============= @@ -1619,6 +1611,15 @@ arp_accept - BOOLEAN gratuitous arp frame, the arp table will be updated regardless if this setting is on or off. +arp_evict_nocarrier - BOOLEAN + Clears the ARP cache on NOCARRIER events. This option is important for + wireless devices where the ARP cache should not be cleared when roaming + between access points on the same network. In most cases this should + remain as the default (1). + + - 1 - (default): Clear the ARP cache on NOCARRIER events + - 0 - Do not clear ARP cache on NOCARRIER events + mcast_solicit - INTEGER The maximum number of multicast probes in INCOMPLETE state, when the associated hardware address is unknown. Defaults @@ -2349,6 +2350,15 @@ ndisc_tclass - INTEGER * 0 - (default) +ndisc_evict_nocarrier - BOOLEAN + Clears the neighbor discovery table on NOCARRIER events. This option is + important for wireless devices where the neighbor discovery cache should + not be cleared when roaming between access points on the same network. + In most cases this should remain as the default (1). + + - 1 - (default): Clear neighbor discover cache on NOCARRIER events. + - 0 - Do not clear neighbor discovery cache on NOCARRIER events. + mldv1_unsolicited_report_interval - INTEGER The interval in milliseconds in which the next unsolicited MLDv1 report retransmit will take place. diff --git a/Documentation/networking/ipvs-sysctl.rst b/Documentation/networking/ipvs-sysctl.rst index 2afccc63856e..95ef56d62077 100644 --- a/Documentation/networking/ipvs-sysctl.rst +++ b/Documentation/networking/ipvs-sysctl.rst @@ -300,3 +300,14 @@ sync_version - INTEGER Kernels with this sync_version entry are able to receive messages of both version 1 and version 2 of the synchronisation protocol. + +run_estimation - BOOLEAN + 0 - disabled + not 0 - enabled (default) + + If disabled, the estimation will be stop, and you can't see + any update on speed estimation data. + + You can always re-enable estimation by setting this value to 1. + But be careful, the first estimation after re-enable is not + accurate. diff --git a/Documentation/networking/mctp.rst b/Documentation/networking/mctp.rst index fa7730dbf7b9..46f74bffce0f 100644 --- a/Documentation/networking/mctp.rst +++ b/Documentation/networking/mctp.rst @@ -211,3 +211,62 @@ remote address is already known, or the message does not require a reply. Like the send calls, sockets will only receive responses to requests they have sent (TO=1) and may only respond (TO=0) to requests they have received. + +Kernel internals +================ + +There are a few possible packet flows in the MCTP stack: + +1. local TX to remote endpoint, message <= MTU:: + + sendmsg() + -> mctp_local_output() + : route lookup + -> rt->output() (== mctp_route_output) + -> dev_queue_xmit() + +2. local TX to remote endpoint, message > MTU:: + + sendmsg() + -> mctp_local_output() + -> mctp_do_fragment_route() + : creates packet-sized skbs. For each new skb: + -> rt->output() (== mctp_route_output) + -> dev_queue_xmit() + +3. remote TX to local endpoint, single-packet message:: + + mctp_pkttype_receive() + : route lookup + -> rt->output() (== mctp_route_input) + : sk_key lookup + -> sock_queue_rcv_skb() + +4. remote TX to local endpoint, multiple-packet message:: + + mctp_pkttype_receive() + : route lookup + -> rt->output() (== mctp_route_input) + : sk_key lookup + : stores skb in struct sk_key->reasm_head + + mctp_pkttype_receive() + : route lookup + -> rt->output() (== mctp_route_input) + : sk_key lookup + : finds existing reassembly in sk_key->reasm_head + : appends new fragment + -> sock_queue_rcv_skb() + +Key refcounts +------------- + + * keys are refed by: + + - a skb: during route output, stored in ``skb->cb``. + + - netns and sock lists. + + * keys can be associated with a device, in which case they hold a + reference to the dev (set through ``key->dev``, counted through + ``dev->key_count``). Multiple keys can reference the device. |