diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-02-24 10:25:37 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-02-24 10:25:37 -0800 |
| commit | e229b429bb4af24d9828758c0c851bb6a4169400 (patch) | |
| tree | 95e49922f6c68b5f81cbf7a39349cfad42c5a0f1 /Documentation | |
| parent | 7ac1161c2789be25d0d206e831b051f43028866e (diff) | |
| parent | d19db80a366576d3ffadf2508ed876b4c1faf959 (diff) | |
Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc/whatever driver subsystem updates
for 5.12-rc1. Over time it seems like this tree is collecting more and
more tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86 maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only
reported issue being a merge conflict due to the dfl_device_id
addition from the fpga subsystem in here"
* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
spmi: spmi-pmic-arb: Fix hw_irq overflow
Documentation: coresight: Add PID tracing description
coresight: etm-perf: Support PID tracing for kernel at EL2
coresight: etm-perf: Clarify comment on perf options
ACRN: update MAINTAINERS: mailing list is subscribers-only
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
regmap: sdw: use _no_pm functions in regmap_read/write
soundwire: intel: fix possible crash when no device is detected
MAINTAINERS: replace my with email with replacements
mhi: Fix double dma free
uapi: map_to_7segment: Update example in documentation
uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
firewire: replace tricky statement by two simple ones
vme: make remove callback return void
firmware: google: make coreboot driver's remove callback return void
firmware: xilinx: Use explicit values for all enum values
sample/acrn: Introduce a sample of HSM ioctl interface usage
virt: acrn: Introduce an interface for Service VM to control vCPU
...
Diffstat (limited to 'Documentation')
44 files changed, 1599 insertions, 708 deletions
diff --git a/Documentation/ABI/stable/sysfs-bus-fsl-mc b/Documentation/ABI/stable/sysfs-bus-fsl-mc new file mode 100644 index 000000000000..58f06c7eeed7 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-bus-fsl-mc @@ -0,0 +1,19 @@ +What: /sys/bus/fsl-mc/rescan +Date: January 2021 +KernelVersion: 5.12 +Contact: Ioana Ciornei <ioana.ciornei@nxp.com> +Description: Writing a non-zero value to this attribute will + force a rescan of fsl-mc bus in the system and + synchronize the objects under fsl-mc bus and the + Management Complex firmware. +Users: Userspace drivers and management tools + +What: /sys/bus/fsl-mc/autorescan +Date: January 2021 +KernelVersion: 5.12 +Contact: Ioana Ciornei <ioana.ciornei@nxp.com> +Description: Writing a zero value to this attribute will + disable the DPRC IRQs on which automatic rescan + of the fsl-mc bus is performed. A non-zero value + will enable the DPRC IRQs. +Users: Userspace drivers and management tools diff --git a/Documentation/ABI/stable/sysfs-driver-speakup b/Documentation/ABI/stable/sysfs-driver-speakup index 792f58ba327d..dc2a6ba1674b 100644 --- a/Documentation/ABI/stable/sysfs-driver-speakup +++ b/Documentation/ABI/stable/sysfs-driver-speakup @@ -273,7 +273,7 @@ Description: In `/sys/accessibility/speakup` is a directory corresponding to Below is a description of values and parameters for soft synthesizer, which is currently the most commonly used. -What: /sys/accessibility/speakup/soft/caps_start +What: /sys/accessibility/speakup/<synth-name>/caps_start KernelVersion: 2.6 Contact: speakup@linux-speakup.org Description: This is the string that is sent to the synthesizer to cause it @@ -281,7 +281,7 @@ Description: This is the string that is sent to the synthesizer to cause it and most others, this causes the pitch of the voice to rise above the currently set pitch. -What: /sys/accessibility/speakup/soft/caps_stop +What: /sys/accessibility/speakup/<synth-name>/caps_stop KernelVersion: 2.6 Contact: speakup@linux-speakup.org Description: This is the string sent to the synthesizer to cause it to stop @@ -290,12 +290,12 @@ Description: This is the string sent to the synthesizer to cause it to stop down to the currently set pitch. -What: /sys/accessibility/speakup/soft/delay_time +What: /sys/accessibility/speakup/<synth-name>/delay_time KernelVersion: 2.6 Contact: speakup@linux-speakup.org Description: TODO: -What: /sys/accessibility/speakup/soft/direct +What: /sys/accessibility/speakup/<synth-name>/direct KernelVersion: 2.6 Contact: speakup@linux-speakup.org Description: Controls if punctuation is spoken by speakup, or by the @@ -306,36 +306,43 @@ Description: Controls if punctuation is spoken by speakup, or by the than". Zero lets speakup speak the punctuation. One lets the synthesizer itself speak punctuation. -What: /sys/accessibility/speakup/soft/freq +What: /sys/accessibility/speakup/<synth-name>/freq KernelVersion: 2.6 Contact: speakup@linux-speakup.org Description: Gets or sets the frequency of the speech synthesizer. Range is 0-9. -What: /sys/accessibility/speakup/soft/full_time +What: /sys/accessibility/speakup/<synth-name>/flush_time +KernelVersion: 5.12 +Contact: speakup@linux-speakup.org +Description: Gets or sets the timeout to wait for the synthesizer flush to + complete. This can be used when the cable gets faulty and flush + notifications are getting lost. + +What: /sys/accessibility/speakup/<synth-name>/full_time KernelVersion: 2.6 Contact: speakup@linux-speakup.org Description: TODO: -What: /sys/accessibility/speakup/soft/jiffy_delta +What: /sys/accessibility/speakup/<synth-name>/jiffy_delta KernelVersion: 2.6 Contact: speakup@linux-speakup.org Description: This controls how many jiffys the kernel gives to the synthesizer. Setting this too high can make a system unstable, or even crash it. -What: /sys/accessibility/speakup/soft/pitch +What: /sys/accessibility/speakup/<synth-name>/pitch KernelVersion: 2.6 Contact: speakup@linux-speakup.org Description: Gets or sets the pitch of the synthesizer. The range is 0-9. -What: /sys/accessibility/speakup/soft/inflection +What: /sys/accessibility/speakup/<synth-name>/inflection KernelVersion: 5.8 Contact: speakup@linux-speakup.org Description: Gets or sets the inflection of the synthesizer, i.e. the pitch range. The range is 0-9. -What: /sys/accessibility/speakup/soft/punct +What: /sys/accessibility/speakup/<synth-name>/punct KernelVersion: 2.6 Contact: speakup@linux-speakup.org Description: Gets or sets the amount of punctuation spoken by the @@ -343,13 +350,13 @@ Description: Gets or sets the amount of punctuation spoken by the TODO: How is this related to speakup's punc_level, or reading_punc. -What: /sys/accessibility/speakup/soft/rate +What: /sys/accessibility/speakup/<synth-name>/rate KernelVersion: 2.6 Contact: speakup@linux-speakup.org Description: Gets or sets the rate of the synthesizer. Range is from zero slowest, to nine fastest. -What: /sys/accessibility/speakup/soft/tone +What: /sys/accessibility/speakup/<synth-name>/tone KernelVersion: 2.6 Contact: speakup@linux-speakup.org Description: Gets or sets the tone of the speech synthesizer. The range for @@ -357,12 +364,12 @@ Description: Gets or sets the tone of the speech synthesizer. The range for difference if using espeak and the espeakup connector. TODO: does espeakup support different tonalities? -What: /sys/accessibility/speakup/soft/trigger_time +What: /sys/accessibility/speakup/<synth-name>/trigger_time KernelVersion: 2.6 Contact: speakup@linux-speakup.org Description: TODO: -What: /sys/accessibility/speakup/soft/voice +What: /sys/accessibility/speakup/<synth-name>/voice KernelVersion: 2.6 Contact: speakup@linux-speakup.org Description: Gets or sets the voice used by the synthesizer if the @@ -371,7 +378,7 @@ Description: Gets or sets the voice used by the synthesizer if the voices, this parameter will not set the voice when the espeakup connector is used between speakup and espeak. -What: /sys/accessibility/speakup/soft/vol +What: /sys/accessibility/speakup/<synth-name>/vol KernelVersion: 2.6 Contact: speakup@linux-speakup.org Description: Gets or sets the volume of the speech synthesizer. Range is 0-9, diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs b/Documentation/ABI/testing/debugfs-driver-habanalabs index c5d678d39144..d447a611c41b 100644 --- a/Documentation/ABI/testing/debugfs-driver-habanalabs +++ b/Documentation/ABI/testing/debugfs-driver-habanalabs @@ -1,7 +1,7 @@ What: /sys/kernel/debug/habanalabs/hl<n>/addr Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Sets the device address to be used for read or write through PCI bar, or the device VA of a host mapped memory to be read or written directly from the host. The latter option is allowed @@ -11,7 +11,7 @@ Description: Sets the device address to be used for read or write through What: /sys/kernel/debug/habanalabs/hl<n>/clk_gate Date: May 2020 KernelVersion: 5.8 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Allow the root user to disable/enable in runtime the clock gating mechanism in Gaudi. Due to how Gaudi is built, the clock gating needs to be disabled in order to access the @@ -34,28 +34,28 @@ Description: Allow the root user to disable/enable in runtime the clock What: /sys/kernel/debug/habanalabs/hl<n>/command_buffers Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Displays a list with information about the currently allocated command buffers What: /sys/kernel/debug/habanalabs/hl<n>/command_submission Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Displays a list with information about the currently active command submissions What: /sys/kernel/debug/habanalabs/hl<n>/command_submission_jobs Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Displays a list with detailed information about each JOB (CB) of each active command submission What: /sys/kernel/debug/habanalabs/hl<n>/data32 Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Allows the root user to read or write directly through the device's PCI bar. Writing to this file generates a write transaction while reading from the file generates a read @@ -70,7 +70,7 @@ Description: Allows the root user to read or write directly through the What: /sys/kernel/debug/habanalabs/hl<n>/data64 Date: Jan 2020 KernelVersion: 5.6 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Allows the root user to read or write 64 bit data directly through the device's PCI bar. Writing to this file generates a write transaction while reading from the file generates a read @@ -85,7 +85,7 @@ Description: Allows the root user to read or write 64 bit data directly What: /sys/kernel/debug/habanalabs/hl<n>/device Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Enables the root user to set the device to specific state. Valid values are "disable", "enable", "suspend", "resume". User can read this property to see the valid values @@ -93,28 +93,28 @@ Description: Enables the root user to set the device to specific state. What: /sys/kernel/debug/habanalabs/hl<n>/engines Date: Jul 2019 KernelVersion: 5.3 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Displays the status registers values of the device engines and their derived idle status What: /sys/kernel/debug/habanalabs/hl<n>/i2c_addr Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Sets I2C device address for I2C transaction that is generated by the device's CPU What: /sys/kernel/debug/habanalabs/hl<n>/i2c_bus Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Sets I2C bus address for I2C transaction that is generated by the device's CPU What: /sys/kernel/debug/habanalabs/hl<n>/i2c_data Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Triggers an I2C transaction that is generated by the device's CPU. Writing to this file generates a write transaction while reading from the file generates a read transcation @@ -122,32 +122,32 @@ Description: Triggers an I2C transaction that is generated by the device's What: /sys/kernel/debug/habanalabs/hl<n>/i2c_reg Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Sets I2C register id for I2C transaction that is generated by the device's CPU What: /sys/kernel/debug/habanalabs/hl<n>/led0 Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Sets the state of the first S/W led on the device What: /sys/kernel/debug/habanalabs/hl<n>/led1 Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Sets the state of the second S/W led on the device What: /sys/kernel/debug/habanalabs/hl<n>/led2 Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Sets the state of the third S/W led on the device What: /sys/kernel/debug/habanalabs/hl<n>/mmu Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Displays the hop values and physical address for a given ASID and virtual address. The user should write the ASID and VA into the file and then read the file to get the result. @@ -157,14 +157,14 @@ Description: Displays the hop values and physical address for a given ASID What: /sys/kernel/debug/habanalabs/hl<n>/set_power_state Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Sets the PCI power state. Valid values are "1" for D0 and "2" for D3Hot What: /sys/kernel/debug/habanalabs/hl<n>/userptr Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Displays a list with information about the currently user pointers (user virtual addresses) that are pinned and mapped to DMA addresses @@ -172,13 +172,21 @@ Description: Displays a list with information about the currently user What: /sys/kernel/debug/habanalabs/hl<n>/vm Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Displays a list with information about all the active virtual address mappings per ASID What: /sys/kernel/debug/habanalabs/hl<n>/stop_on_err Date: Mar 2020 KernelVersion: 5.6 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Sets the stop-on_error option for the device engines. Value of "0" is for disable, otherwise enable. + +What: /sys/kernel/debug/habanalabs/hl<n>/dump_security_violations +Date: Jan 2021 +KernelVersion: 5.12 +Contact: ogabbay@kernel.org +Description: Dumps all security violations to dmesg. This will also ack + all security violations meanings those violations will not be + dumped next time user calls this API diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x index 881f0cd99ce4..8e53a32f8150 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x @@ -371,6 +371,14 @@ Contact: Mathieu Poirier <mathieu.poirier@linaro.org> Description: (Read) Print the content of the Device ID Register (0xFC8). The value is taken directly from the HW. +What: /sys/bus/coresight/devices/etm<N>/mgmt/trcdevarch +Date: January 2021 +KernelVersion: 5.12 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (Read) Print the content of the Device Architecture Register + (offset 0xFBC). The value is taken directly read + from the HW. + What: /sys/bus/coresight/devices/etm<N>/mgmt/trcdevtype Date: April 2015 KernelVersion: 4.01 diff --git a/Documentation/ABI/testing/sysfs-bus-dfl-devices-emif b/Documentation/ABI/testing/sysfs-bus-dfl-devices-emif new file mode 100644 index 000000000000..817d14126d4d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-dfl-devices-emif @@ -0,0 +1,25 @@ +What: /sys/bus/dfl/devices/dfl_dev.X/infX_cal_fail +Date: Oct 2020 +KernelVersion: 5.12 +Contact: Xu Yilun <yilun.xu@intel.com> +Description: Read-only. It indicates if the calibration failed on this + memory interface. "1" for calibration failure, "0" for OK. + Format: %u + +What: /sys/bus/dfl/devices/dfl_dev.X/infX_init_done +Date: Oct 2020 +KernelVersion: 5.12 +Contact: Xu Yilun <yilun.xu@intel.com> +Description: Read-only. It indicates if the initialization completed on + this memory interface. "1" for initialization complete, "0" + for not yet. + Format: %u + +What: /sys/bus/dfl/devices/dfl_dev.X/infX_clear +Date: Oct 2020 +KernelVersion: 5.12 +Contact: Xu Yilun <yilun.xu@intel.com> +Description: Write-only. Writing "1" to this file will zero out all memory + data in this memory interface. Writing of other values is + invalid. + Format: %u diff --git a/Documentation/ABI/testing/sysfs-bus-dfl-devices-n3000-nios b/Documentation/ABI/testing/sysfs-bus-dfl-devices-n3000-nios new file mode 100644 index 000000000000..5335d742bcaf --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-dfl-devices-n3000-nios @@ -0,0 +1,47 @@ +What: /sys/bus/dfl/devices/dfl_dev.X/fec_mode +Date: Oct 2020 +KernelVersion: 5.12 +Contact: Xu Yilun <yilun.xu@intel.com> +Description: Read-only. Returns the FEC mode of the 25G links of the + ethernet retimers configured by Nios firmware. "rs" for Reed + Solomon FEC, "kr" for Fire Code FEC, "no" for NO FEC. + "not supported" if the FEC mode setting is not supported, this + happens when the Nios firmware version major < 3, or no link is + configured to 25G. + Format: string + +What: /sys/bus/dfl/devices/dfl_dev.X/retimer_A_mode +Date: Oct 2020 +KernelVersion: 5.12 +Contact: Xu Yilun <yilun.xu@intel.com> +Description: Read-only. Returns the enumeration value of the working mode of + the retimer A configured by the Nios firmware. The value is + read out from shared registers filled by the Nios firmware. Now + the values could be: + + - "0": Reset + - "1": 4x10G + - "2": 4x25G + - "3": 2x25G + - "4": 2x25G+2x10G + - "5": 1x25G + + If the Nios firmware is updated in future to support more + retimer modes, more enumeration value is expected. + Format: 0x%x + +What: /sys/bus/dfl/devices/dfl_dev.X/retimer_B_mode +Date: Oct 2020 +KernelVersion: 5.12 +Contact: Xu Yilun <yilun.xu@intel.com> +Description: Read-only. Returns the enumeration value of the working mode of + the retimer B configured by the Nios firmware. The value format + is the same as retimer_A_mode. + +What: /sys/bus/dfl/devices/dfl_dev.X/nios_fw_version +Date: Oct 2020 +KernelVersion: 5.12 +Contact: Xu Yilun <yilun.xu@intel.com> +Description: Read-only. Returns the version of the Nios firmware in the + FPGA. Its format is "major.minor.patch". + Format: %x.%x.%x diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-pvpanic b/Documentation/ABI/testing/sysfs-bus-pci-devices-pvpanic new file mode 100644 index 000000000000..1936f7324155 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-pvpanic @@ -0,0 +1,24 @@ +What: /sys/devices/pci0000:00/*/QEMU0001:00/capability +Date: Jan 2021 +Contact: zhenwei pi <pizhenwei@bytedance.com> +Description: + Read-only attribute. Capabilities of pvpanic device which + are supported by QEMU. + + Format: %x. + + Detailed bit definition refers to section <Bit Definition> + from pvpanic device specification: + https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/specs/pvpanic.txt + +What: /sys/devices/pci0000:00/*/QEMU0001:00/events +Date: Jan 2021 +Contact: zhenwei pi <pizhenwei@bytedance.com> +Description: + RW attribute. Set/get which features in-use. This attribute + is used to enable/disable feature(s) of pvpanic device. + Notice that this value should be a subset of capability. + + Format: %x. + + Also refer to pvpanic device specification. diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs index 169ae4b2a180..1f127f71d2b4 100644 --- a/Documentation/ABI/testing/sysfs-driver-habanalabs +++ b/Documentation/ABI/testing/sysfs-driver-habanalabs @@ -1,7 +1,7 @@ What: /sys/class/habanalabs/hl<n>/armcp_kernel_ver Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Version of the Linux kernel running on the device's CPU. Will be DEPRECATED in Linux kernel version 5.10, and be replaced with cpucp_kernel_ver @@ -9,7 +9,7 @@ Description: Version of the Linux kernel running on the device's CPU. What: /sys/class/habanalabs/hl<n>/armcp_ver Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Version of the application running on the device's CPU Will be DEPRECATED in Linux kernel version 5.10, and be replaced with cpucp_ver @@ -17,7 +17,7 @@ Description: Version of the application running on the device's CPU What: /sys/class/habanalabs/hl<n>/clk_max_freq_mhz Date: Jun 2019 KernelVersion: not yet upstreamed -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Allows the user to set the maximum clock frequency, in MHz. The device clock might be set to lower value than the maximum. The user should read the clk_cur_freq_mhz to see the actual @@ -27,52 +27,52 @@ Description: Allows the user to set the maximum clock frequency, in MHz. What: /sys/class/habanalabs/hl<n>/clk_cur_freq_mhz Date: Jun 2019 KernelVersion: not yet upstreamed -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Displays the current frequency, in MHz, of the device clock. This property is valid only for the Gaudi ASIC family What: /sys/class/habanalabs/hl<n>/cpld_ver Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Version of the Device's CPLD F/W What: /sys/class/habanalabs/hl<n>/cpucp_kernel_ver Date: Oct 2020 KernelVersion: 5.10 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Version of the Linux kernel running on the device's CPU What: /sys/class/habanalabs/hl<n>/cpucp_ver Date: Oct 2020 KernelVersion: 5.10 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Version of the application running on the device's CPU What: /sys/class/habanalabs/hl<n>/device_type Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Displays the code name of the device according to its type. The supported values are: "GOYA" What: /sys/class/habanalabs/hl<n>/eeprom Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: A binary file attribute that contains the contents of the on-board EEPROM What: /sys/class/habanalabs/hl<n>/fuse_ver Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Displays the device's version from the eFuse What: /sys/class/habanalabs/hl<n>/hard_reset Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Interface to trigger a hard-reset operation for the device. Hard-reset will reset ALL internal components of the device except for the PCI interface and the internal PLLs @@ -80,14 +80,14 @@ Description: Interface to trigger a hard-reset operation for the device. What: /sys/class/habanalabs/hl<n>/hard_reset_cnt Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Displays how many times the device have undergone a hard-reset operation since the driver was loaded What: /sys/class/habanalabs/hl<n>/high_pll Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Allows the user to set the maximum clock frequency for MME, TPC and IC when the power management profile is set to "automatic". This property is valid only for the Goya ASIC family @@ -95,7 +95,7 @@ Description: Allows the user to set the maximum clock frequency for MME, TPC What: /sys/class/habanalabs/hl<n>/ic_clk Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Allows the user to set the maximum clock frequency, in Hz, of the Interconnect fabric. Writes to this parameter affect the device only when the power management profile is set to "manual" @@ -107,27 +107,27 @@ Description: Allows the user to set the maximum clock frequency, in Hz, of What: /sys/class/habanalabs/hl<n>/ic_clk_curr Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Displays the current clock frequency, in Hz, of the Interconnect fabric. This property is valid only for the Goya ASIC family What: /sys/class/habanalabs/hl<n>/infineon_ver Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Version of the Device's power supply F/W code What: /sys/class/habanalabs/hl<n>/max_power Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Allows the user to set the maximum power consumption of the device in milliwatts. What: /sys/class/habanalabs/hl<n>/mme_clk Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Allows the user to set the maximum clock frequency, in Hz, of the MME compute engine. Writes to this parameter affect the device only when the power management profile is set to "manual" @@ -139,21 +139,21 @@ Description: Allows the user to set the maximum clock frequency, in Hz, of What: /sys/class/habanalabs/hl<n>/mme_clk_curr Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Displays the current clock frequency, in Hz, of the MME compute engine. This property is valid only for the Goya ASIC family What: /sys/class/habanalabs/hl<n>/pci_addr Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Displays the PCI address of the device. This is needed so the user would be able to open a device based on its PCI address What: /sys/class/habanalabs/hl<n>/pm_mng_profile Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Power management profile. Values are "auto", "manual". In "auto" mode, the driver will set the maximum clock frequency to a high value when a user-space process opens the device's file (unless @@ -167,13 +167,13 @@ Description: Power management profile. Values are "auto", "manual". In "auto" What: /sys/class/habanalabs/hl<n>/preboot_btl_ver Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Version of the device's preboot F/W code What: /sys/class/habanalabs/hl<n>/soft_reset Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Interface to trigger a soft-reset operation for the device. Soft-reset will reset only the compute and DMA engines of the device @@ -181,26 +181,26 @@ Description: Interface to trigger a soft-reset operation for the device. What: /sys/class/habanalabs/hl<n>/soft_reset_cnt Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Displays how many times the device have undergone a soft-reset operation since the driver was loaded What: /sys/class/habanalabs/hl<n>/status Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Status of the card: "Operational", "Malfunction", "In reset". What: /sys/class/habanalabs/hl<n>/thermal_ver Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Version of the Device's thermal daemon What: /sys/class/habanalabs/hl<n>/tpc_clk Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Allows the user to set the maximum clock frequency, in Hz, of the TPC compute engines. Writes to this parameter affect the device only when the power management profile is set to "manual" @@ -212,12 +212,12 @@ Description: Allows the user to set the maximum clock frequency, in Hz, of What: /sys/class/habanalabs/hl<n>/tpc_clk_curr Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Displays the current clock frequency, in Hz, of the TPC compute engines. This property is valid only for the Goya ASIC family What: /sys/class/habanalabs/hl<n>/uboot_ver Date: Jan 2019 KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com +Contact: ogabbay@kernel.org Description: Version of the u-boot running on the device's CPU
\ No newline at end of file diff --git a/Documentation/admin-guide/spkguide.txt b/Documentation/admin-guide/spkguide.txt index 5ff6a0fe87d1..977ab3f5a0a8 100644 --- a/Documentation/admin-guide/spkguide.txt +++ b/Documentation/admin-guide/spkguide.txt @@ -1033,7 +1033,9 @@ speakup + keypad 3, you would hear: The speakup key is depressed, so the name of the key state is speakup. This part of the message comes from the states collection. -14.2. Loading Your Own Messages +14.2. Changing language + +14.2.1. Loading Your Own Messages The files under the i18n subdirectory all follow the same format. They consist of lines, with one message per line. @@ -1066,8 +1068,50 @@ echo '1 azul' > /speakup/i18n/colors The next time that Speakup says message 1 from the colors group, it will say "azul", rather than "blue." +14.2.2. Choose a language + In the future, translations into various languages will be made available, -and most users will just load the files necessary for their language. +and most users will just load the files necessary for their language. So far, +only French language is available beyond native Canadian English language. + +French is only available after you are logged in. + +Canadian English is the default language. To toggle another language, +download the source of Speakup and untar it in your home directory. The +following command should let you do this: + +tar xvjf speakup-<version>.tar.bz2 + +where <version> is the version number of the application. + +Next, change to the newly created directory, then into the tools/ directory, and +run the script speakup_setlocale. You are asked the language that you want to +use. Type the number associated to your language (e.g. fr for French) then press +Enter. Needed files are copied in the i18n directory. + +Note: the speakupconf must be installed on your system so that settings are saved. +Otherwise, you will have an error: your language will be loaded but you will +have to run the script again every time Speakup restarts. +See section 16.1. for information about speakupconf. + +You will have to repeat these steps for any change of locale, i.e. if you wish +change the speakup's language or charset (iso-8859-15 ou UTF-8). + +If you wish store the settings, note that at your next login, you will need to +do: + +speakup load + +Alternatively, you can add the above line to your file +~/.bashrc or ~/.bash_profile. + +If your system administrator ran himself the script, all the users will be able +to change from English to the language choosed by root and do directly +speakupconf load (or add this to the ~/.bashrc or +~/.bash_profile file). If there are several languages to handle, the +administrator (or every user) will have to run the first steps until speakupconf +save, choosing the appropriate language, in every user's home directory. Every +user will then be able to do speakupconf load, Speakup will load his own settings. 14.3. No Support for Non-Western-European Languages diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index d711676b4a51..7f9c1ca87487 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -34,9 +34,12 @@ its hardware characteristcs. Program Flow Trace Macrocell: "arm,coresight-etm3x", "arm,primecell"; - - Embedded Trace Macrocell (version 4.x): + - Embedded Trace Macrocell (version 4.x), with memory mapped access. "arm,coresight-etm4x", "arm,primecell"; + - Embedded Trace Macrocell (version 4.x), with system register access only. + "arm,coresight-etm4x-sysreg"; + - Coresight programmable Replicator : "arm,coresight-dynamic-replicator", "arm,primecell"; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt index f06f24d405a5..8238a86686be 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt @@ -22,23 +22,7 @@ Required properties: MIPI TX Configuration Module ============================ -The MIPI TX configuration module controls the MIPI D-PHY. - -Required properties: -- compatible: "mediatek,<chip>-mipi-tx" -- the supported chips are mt2701, 7623, mt8173 and mt8183. -- reg: Physical base address and length of the controller's registers -- clocks: PLL reference clock -- clock-output-names: name of the output clock line to the DSI encoder -- #clock-cells: must be <0>; -- #phy-cells: must be <0>. - -Optional properties: -- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And - the step is 200. -- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If - unspecified default values shall be used. -- nvmem-cell-names: Should be "calibration-data" +See phy/mediatek,dsi-phy.yaml Example: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt index 6b1c586403e4..b284ca51b913 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt @@ -53,23 +53,7 @@ Required properties: HDMI PHY ======== - -The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel -output and drives the HDMI pads. - -Required properties: -- compatible: "mediatek,<chip>-hdmi-phy" -- the supported chips are mt2701, mt7623 and mt8173 -- reg: Physical base address and length of the module's registers -- clocks: PLL reference clock -- clock-names: must contain "pll_ref" -- clock-output-names: must be "hdmitx_dig_cts" on mt8173 -- #phy-cells: must be <0> -- #clock-cells: must be <0> - -Optional properties: -- mediatek,ibias: TX DRV bias current for <1.65Gbps, defaults to 0xa -- mediatek,ibias_up: TX DRV bias current for >1.65Gbps, defaults to 0x1c +See phy/mediatek,hdmi-phy.yaml Example: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml deleted file mode 100644 index 3fbb8785fbc9..000000000000 --- a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml +++ /dev/null @@ -1,77 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/interconnect/qcom,qcs404.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm QCS404 Network-On-Chip interconnect - -maintainers: - - Georgi Djakov <georgi.djakov@linaro.org> - -description: | - The Qualcomm QCS404 interconnect providers support adjusting the - bandwidth requirements between the various NoC fabrics. - -properties: - reg: - maxItems: 1 - - compatible: - enum: - - qcom,qcs404-bimc - - qcom,qcs404-pcnoc - - qcom,qcs404-snoc - - '#interconnect-cells': - const: 1 - - clock-names: - items: - - const: bus - - const: bus_a - - clocks: - items: - - description: Bus Clock - - description: Bus A Clock - -required: - - compatible - - reg - - '#interconnect-cells' - - clock-names - - clocks - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,rpmcc.h> - - bimc: interconnect@400000 { - reg = <0x00400000 0x80000>; - compatible = "qcom,qcs404-bimc"; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; - }; - - pnoc: interconnect@500000 { - reg = <0x00500000 0x15080>; - compatible = "qcom,qcs404-pcnoc"; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_PNOC_CLK>, - <&rpmcc RPM_SMD_PNOC_A_CLK>; - }; - - snoc: interconnect@580000 { - reg = <0x00580000 0x23080>; - compatible = "qcom,qcs404-snoc"; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; - }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml index e1009ae4e8f7..983d71fb5399 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml @@ -1,27 +1,35 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/interconnect/qcom,msm8916.yaml# +$id: http://devicetree.org/schemas/interconnect/qcom,rpm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm MSM8916 Network-On-Chip interconnect +title: Qualcomm RPM Network-On-Chip Interconnect maintainers: - Georgi Djakov <georgi.djakov@linaro.org> description: | - The Qualcomm MSM8916 interconnect providers support adjusting the - bandwidth requirements between the various NoC fabrics. + RPM interconnect providers support system bandwidth requirements through + RPM processor. The provider is able to communicate with the RPM through + the RPM shared memory device. properties: + reg: + maxItems: 1 + compatible: enum: - qcom,msm8916-bimc - qcom,msm8916-pcnoc - qcom,msm8916-snoc - - reg: - maxItems: 1 + - qcom,msm8939-bimc + - qcom,msm8939-pcnoc + - qcom,msm8939-snoc + - qcom,msm8939-snoc-mm + - qcom,qcs404-bimc + - qcom,qcs404-pcnoc + - qcom,qcs404-snoc '#interconnect-cells': const: 1 diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index ebcf465c4280..799e73cdb90b 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -45,6 +45,10 @@ properties: - qcom,sdm845-mem-noc - qcom,sdm845-mmss-noc - qcom,sdm845-system-noc + - qcom,sdx55-ipa-virt + - qcom,sdx55-mc-virt + - qcom,sdx55-mem-noc + - qcom,sdx55-system-noc - qcom,sm8150-aggre1-noc - qcom,sm8150-aggre2-noc - qcom,sm8150-camnoc-noc diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt index a8ebb4621f79..7b636b7a8311 100644 --- a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt +++ b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt @@ -4,6 +4,7 @@ Required properties: - compatible : shall be one of: "atmel,at93c46d" "eeprom-93xx46" + "microchip,93lc46b" - data-size : number of data bits per word (either 8 or 16) Optional properties: diff --git a/Documentation/devicetree/bindings/nvmem/rmem.yaml b/Documentation/devicetree/bindings/nvmem/rmem.yaml new file mode 100644 index 000000000000..1d85a0a30846 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/rmem.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/rmem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Reserved Memory Based nvmem Device + +maintainers: + - Nicolas Saenz Julienne <nsaenzjulienne@suse.de> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + items: + - enum: + - raspberrypi,bootloader-config + - const: nvmem-rmem + + no-map: + $ref: /schemas/types.yaml#/definitions/flag + description: + Avoid creating a virtual mapping of the region as part of the OS' + standard mapping of system memory. + +required: + - compatible + - no-map + +unevaluatedProperties: false + +examples: + - | + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + + blconfig: nvram@10000000 { + compatible = "raspberrypi,bootloader-config", "nvmem-rmem"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10000000 0x1000>; + no-map; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt deleted file mode 100644 index 698aacbdcfc4..000000000000 --- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt +++ /dev/null @@ -1,86 +0,0 @@ -Broadcom STB USB PHY - -Required properties: -- compatible: should be one of - "brcm,brcmstb-usb-phy" - "brcm,bcm7216-usb-phy" - "brcm,bcm7211-usb-phy" - -- reg and reg-names properties requirements are specific to the - compatible string. - "brcm,brcmstb-usb-phy": - - reg: 1 or 2 offset and length pairs. One for the base CTRL registers - and an optional pair for systems with USB 3.x support - - reg-names: not specified - "brcm,bcm7216-usb-phy": - - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL - registers - - reg-names: "ctrl", "xhci_ec", "xhci_gbl" - "brcm,bcm7211-usb-phy": - - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL, - USB_PHY and USB_MDIO registers and an optional pair - for the BDC registers - - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec" - -- #phy-cells: Shall be 1 as it expects one argument for setting - the type of the PHY. Possible values are: - - PHY_TYPE_USB2 for USB1.1/2.0 PHY - - PHY_TYPE_USB3 for USB3.x PHY - -Optional Properties: -- clocks : clock phandles. -- clock-names: String, clock name. -- interrupts: wakeup interrupt -- interrupt-names: "wakeup" -- brcm,ipp: Boolean, Invert Port Power. - Possible values are: 0 (Don't invert), 1 (Invert) -- brcm,ioc: Boolean, Invert Over Current detection. - Possible values are: 0 (Don't invert), 1 (Invert) -- dr_mode: String, PHY Device mode. - Possible values are: "host", "peripheral ", "drd" or "typec-pd" - If this property is not defined, the phy will default to "host" mode. -- brcm,syscon-piarbctl: phandle to syscon for handling config registers -NOTE: one or both of the following two properties must be set -- brcm,has-xhci: Boolean indicating the phy has an XHCI phy. -- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy. - - -Example: - -usbphy_0: usb-phy@f0470200 { - reg = <0xf0470200 0xb8>, - <0xf0471940 0x6c0>; - compatible = "brcm,brcmstb-usb-phy"; - #phy-cells = <1>; - dr_mode = "host" - brcm,ioc = <1>; - brcm,ipp = <1>; - brcm,has-xhci; - brcm,has-eohci; - clocks = <&usb20>, <&usb30>; - clock-names = "sw_usb", "sw_usb3"; -}; - -usb-phy@29f0200 { - reg = <0x29f0200 0x200>, - <0x29c0880 0x30>, - <0x29cc100 0x534>, - <0x2808000 0x24>, - <0x2980080 0x8>; - reg-names = "ctrl", - "xhci_ec", - "xhci_gbl", - "usb_phy", - "usb_mdio"; - brcm,ioc = <0x0>; - brcm,ipp = <0x0>; - compatible = "brcm,bcm7211-usb-phy"; - interrupts = <0x30>; - interrupt-parent = <&vpu_intr1_nosec_intc>; - interrupt-names = "wake"; - #phy-cells = <0x1>; - brcm,has-xhci; - syscon-piarbctl = <&syscon_piarbctl>; - clocks = <&scmi_clk 256>; - clock-names = "sw_usb"; -}; diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml new file mode 100644 index 000000000000..0497368d1fca --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml @@ -0,0 +1,196 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/brcm,brcmstb-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom STB USB PHY + +description: Broadcom's PHY that handles EHCI/OHCI and/or XHCI + +maintainers: + - Al Cooper <alcooperx@gmail.com> + - RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + +properties: + compatible: + enum: + - brcm,bcm4908-usb-phy + - brcm,bcm7211-usb-phy + - brcm,bcm7216-usb-phy + - brcm,brcmstb-usb-phy + + reg: + minItems: 1 + maxItems: 6 + items: + - description: the base CTRL register + - description: XHCI EC register + - description: XHCI GBL register + - description: USB PHY register + - description: USB MDIO register + - description: BDC register + + reg-names: + minItems: 1 + maxItems: 6 + items: + - const: ctrl + - const: xhci_ec + - const: xhci_gbl + - const: usb_phy + - const: usb_mdio + - const: bdc_ec + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: sw_usb + - const: sw_usb3 + + interrupts: + description: wakeup interrupt + + interrupt-names: + const: wake + + brcm,ipp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Invert Port Power + minimum: 0 + maximum: 1 + + brcm,ioc: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Invert Over Current detection + minimum: 0 + maximum: 1 + + dr_mode: + description: PHY Device mode. If this property is not defined, the PHY will + default to "host" mode. + enum: + - host + - peripheral + - drd + - typec-pd + + brcm,syscon-piarbctl: + description: phandle to syscon for handling config registers + $ref: /schemas/types.yaml#/definitions/phandle + + brcm,has-xhci: + description: Indicates the PHY has an XHCI PHY. + type: boolean + + brcm,has-eohci: + description: Indicates the PHY has an EHCI/OHCI PHY. + type: boolean + + "#phy-cells": + description: | + Cell allows setting the type of the PHY. Possible values are: + - PHY_TYPE_USB2 for USB1.1/2.0 PHY + - PHY_TYPE_USB3 for USB3.x PHY + const: 1 + +required: + - reg + - "#phy-cells" + +anyOf: + - required: + - brcm,has-xhci + - required: + - brcm,has-eohci + +allOf: + - if: + properties: + compatible: + contains: + enum: + - const: brcm,bcm4908-usb-phy + - const: brcm,brcmstb-usb-phy + then: + properties: + reg: + minItems: 1 + maxItems: 2 + - if: + properties: + compatible: + contains: + const: brcm,bcm7211-usb-phy + then: + properties: + reg: + minItems: 5 + maxItems: 6 + reg-names: + minItems: 5 + maxItems: 6 + - if: + properties: + compatible: + contains: + const: brcm,bcm7216-usb-phy + then: + properties: + reg: + minItems: 3 + maxItems: 3 + reg-names: + minItems: 3 + maxItems: 3 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + + usb-phy@f0470200 { + compatible = "brcm,brcmstb-usb-phy"; + reg = <0xf0470200 0xb8>, + <0xf0471940 0x6c0>; + #phy-cells = <1>; + dr_mode = "host"; + brcm,ioc = <1>; + brcm,ipp = <1>; + brcm,has-xhci; + brcm,has-eohci; + clocks = <&usb20>, <&usb30>; + clock-names = "sw_usb", "sw_usb3"; + }; + - | + #include <dt-bindings/phy/phy.h> + + usb-phy@29f0200 { + compatible = "brcm,bcm7211-usb-phy"; + reg = <0x29f0200 0x200>, + <0x29c0880 0x30>, + <0x29cc100 0x534>, + <0x2808000 0x24>, + <0x2980080 0x8>; + reg-names = "ctrl", + "xhci_ec", + "xhci_gbl", + "usb_phy", + "usb_mdio"; + brcm,ioc = <0x0>; + brcm,ipp = <0x0>; + interrupts = <0x30>; + interrupt-parent = <&vpu_intr1_nosec_intc>; + interrupt-names = "wake"; + #phy-cells = <0x1>; + brcm,has-xhci; + brcm,syscon-piarbctl = <&syscon_piarbctl>; + clocks = <&scmi_clk 256>; + clock-names = "sw_usb"; + }; diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml new file mode 100644 index 000000000000..71d4acea1f66 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,dsi-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MIPI Display Serial Interface (DSI) PHY binding + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + - Chunfeng Yun <chunfeng.yun@mediatek.com> + +description: The MIPI DSI PHY supports up to 4-lane output. + +properties: + $nodename: + pattern: "^dsi-phy@[0-9a-f]+$" + + compatible: + enum: + - mediatek,mt2701-mipi-tx + - mediatek,mt7623-mipi-tx + - mediatek,mt8173-mipi-tx + - mediatek,mt8183-mipi-tx + + reg: + maxItems: 1 + + clocks: + items: + - description: PLL reference clock + + clock-output-names: + maxItems: 1 + + "#phy-cells": + const: 0 + + "#clock-cells": + const: 0 + + nvmem-cells: + maxItems: 1 + description: A phandle to the calibration data provided by a nvmem device, + if unspecified, default values shall be used. + + nvmem-cell-names: + items: + - const: calibration-data + + drive-strength-microamp: + description: adjust driving current + multipleOf: 200 + minimum: 2000 + maximum: 6000 + default: 4600 + +required: + - compatible + - reg + - clocks + - clock-output-names + - "#phy-cells" + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + dsi-phy@10215000 { + compatible = "mediatek,mt8173-mipi-tx"; + reg = <0x10215000 0x1000>; + clocks = <&clk26m>; + clock-output-names = "mipi_tx0_pll"; + drive-strength-microamp = <4000>; + nvmem-cells= <&mipi_tx_calibration>; + nvmem-cell-names = "calibration-data"; + #clock-cells = <0>; + #phy-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml new file mode 100644 index 000000000000..4752517a1446 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,hdmi-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek High Definition Multimedia Interface (HDMI) PHY binding + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + - Chunfeng Yun <chunfeng.yun@mediatek.com> + +description: | + The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel + output and drives the HDMI pads. + +properties: + $nodename: + pattern: "^hdmi-phy@[0-9a-f]+$" + + compatible: + enum: + - mediatek,mt2701-hdmi-phy + - mediatek,mt7623-hdmi-phy + - mediatek,mt8173-hdmi-phy + + reg: + maxItems: 1 + + clocks: + items: + - description: PLL reference clock + + clock-names: + items: + - const: pll_ref + + clock-output-names: + items: + - const: hdmitx_dig_cts + + "#phy-cells": + const: 0 + + "#clock-cells": + const: 0 + + mediatek,ibias: + description: + TX DRV bias current for < 1.65Gbps + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 0xa + + mediatek,ibias_up: + description: + TX DRV bias current for >= 1.65Gbps + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 0x1c + +required: + - compatible + - reg + - clocks + - clock-names + - clock-output-names + - "#phy-cells" + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + hdmi_phy: hdmi-phy@10209100 { + compatible = "mediatek,mt8173-hdmi-phy"; + reg = <0x10209100 0x24>; + clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>; + clock-names = "pll_ref"; + clock-output-names = "hdmitx_dig_cts"; + mediatek,ibias = <0xa>; + mediatek,ibias_up = <0x1c>; + #clock-cells = <0>; + #phy-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml new file mode 100644 index 000000000000..602e6ff45785 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -0,0 +1,260 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek T-PHY Controller Device Tree Bindings + +maintainers: + - Chunfeng Yun <chunfeng.yun@mediatek.com> + +description: | + The T-PHY controller supports physical layer functionality for a number of + controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA. + + Layout differences of banks between T-PHY V1 (mt8173/mt2701) and + T-PHY V2 (mt2712) when works on USB mode: + ----------------------------------- + Version 1: + port offset bank + shared 0x0000 SPLLC + 0x0100 FMREG + u2 port0 0x0800 U2PHY_COM + u3 port0 0x0900 U3PHYD + 0x0a00 U3PHYD_BANK2 + 0x0b00 U3PHYA + 0x0c00 U3PHYA_DA + u2 port1 0x1000 U2PHY_COM + u3 port1 0x1100 U3PHYD + 0x1200 U3PHYD_BANK2 + 0x1300 U3PHYA + 0x1400 U3PHYA_DA + u2 port2 0x1800 U2PHY_COM + ... + + Version 2: + port offset bank + u2 port0 0x0000 MISC + 0x0100 FMREG + 0x0300 U2PHY_COM + u3 port0 0x0700 SPLLC + 0x0800 CHIP + 0x0900 U3PHYD + 0x0a00 U3PHYD_BANK2 + 0x0b00 U3PHYA + 0x0c00 U3PHYA_DA + u2 port1 0x1000 MISC + 0x1100 FMREG + 0x1300 U2PHY_COM + u3 port1 0x1700 SPLLC + 0x1800 CHIP + 0x1900 U3PHYD + 0x1a00 U3PHYD_BANK2 + 0x1b00 U3PHYA + 0x1c00 U3PHYA_DA + u2 port2 0x2000 MISC + ... + + SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back + into each port; a new bank MISC for u2 ports and CHIP for u3 ports are + added on V2. + +properties: + $nodename: + pattern: "^t-phy@[0-9a-f]+$" + + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2701-tphy + - mediatek,mt7623-tphy + - mediatek,mt7622-tphy + - mediatek,mt8516-tphy + - const: mediatek,generic-tphy-v1 + - items: + - enum: + - mediatek,mt2712-tphy + - mediatek,mt7629-tphy + - mediatek,mt8183-tphy + - const: mediatek,generic-tphy-v2 + - const: mediatek,mt2701-u3phy + deprecated: true + - const: mediatek,mt2712-u3phy + deprecated: true + - const: mediatek,mt8173-u3phy + + reg: + description: + Register shared by multiple ports, exclude port's private register. + It is needed for T-PHY V1, such as mt2701 and mt8173, but not for + T-PHY V2, such as mt2712. + maxItems: 1 + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + + # Used with non-empty value if optional 'reg' is not provided. + # The format of the value is an arbitrary number of triplets of + # (child-bus-address, parent-bus-address, length). + ranges: true + + mediatek,src-ref-clk-mhz: + description: + Frequency of reference clock for slew rate calibrate + default: 26 + + mediatek,src-coef: + description: + Coefficient for slew rate calibrate, depends on SoC process + $ref: /schemas/types.yaml#/definitions/uint32 + default: 28 + +# Required child node: +patternProperties: + "^usb-phy@[0-9a-f]+$": + type: object + description: + A sub-node is required for each port the controller provides. + Address range information including the usual 'reg' property + is used inside these nodes to describe the controller's topology. + + properties: + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + items: + - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz) + - description: Reference clock of analog phy + description: + Uses both clocks if the clock of analog and digital phys are + separated, otherwise uses "ref" clock only if needed. + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: ref + - const: da_ref + + "#phy-cells": + const: 1 + description: | + The cells contain the following arguments. + + - description: The PHY type + enum: + - PHY_TYPE_USB2 + - PHY_TYPE_USB3 + - PHY_TYPE_PCIE + - PHY_TYPE_SATA + + # The following optional vendor properties are only for debug or HQA test + mediatek,eye-src: + description: + The value of slew rate calibrate (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,eye-vrt: + description: + The selection of VRT reference voltage (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,eye-term: + description: + The selection of HS_TX TERM reference voltage (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,intr: + description: + The selection of internal resistor (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 31 + + mediatek,discth: + description: + The selection of disconnect threshold (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 15 + + mediatek,bc12: + description: + Specify the flag to enable BC1.2 if support it + type: boolean + + required: + - reg + - "#phy-cells" + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/phy/phy.h> + usb@11271000 { + compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3"; + reg = <0x11271000 0x3000>, <0x11280700 0x0100>; + reg-names = "mac", "ippc"; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>, + <&u2port1 PHY_TYPE_USB2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_USB30_SEL>; + clock-names = "sys_ck"; + }; + + t-phy@11290000 { + compatible = "mediatek,mt8173-u3phy"; + reg = <0x11290000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + u2port0: usb-phy@11290800 { + reg = <0x11290800 0x100>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>, <&clk48m>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + + u3port0: usb-phy@11290900 { + reg = <0x11290900 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + }; + + u2port1: usb-phy@11291000 { + reg = <0x11291000 0x100>; + #phy-cells = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml new file mode 100644 index 000000000000..3a9be82e7f13 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,ufs-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Universal Flash Storage (UFS) M-PHY binding + +maintainers: + - Stanley Chu <stanley.chu@mediatek.com> + - Chunfeng Yun <chunfeng.yun@mediatek.com> + +description: | + UFS M-PHY nodes are defined to describe on-chip UFS M-PHY hardware macro. + Each UFS M-PHY node should have its own node. + To bind UFS M-PHY with UFS host controller, the controller node should + contain a phandle reference to UFS M-PHY node. + +properties: + $nodename: + pattern: "^ufs-phy@[0-9a-f]+$" + + compatible: + const: mediatek,mt8183-ufsphy + + reg: + maxItems: 1 + + clocks: + items: + - description: Unipro core control clock. + - description: M-PHY core control clock. + + clock-names: + items: + - const: unipro + - const: mp + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + ufsphy: ufs-phy@11fa0000 { + compatible = "mediatek,mt8183-ufsphy"; + reg = <0x11fa0000 0xc000>; + clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>, + <&infracfg CLK_INFRA_UFS_MP_SAP_BCLK>; + clock-names = "unipro", "mp"; + #phy-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml new file mode 100644 index 000000000000..598fd2b95c29 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,xsphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek XS-PHY Controller Device Tree Bindings + +maintainers: + - Chunfeng Yun <chunfeng.yun@mediatek.com> + +description: | + The XS-PHY controller supports physical layer functionality for USB3.1 + GEN2 controller on MediaTek SoCs. + + Banks layout of xsphy + ---------------------------------- + port offset bank + u2 port0 0x0000 MISC + 0x0100 FMREG + 0x0300 U2PHY_COM + u2 port1 0x1000 MISC + 0x1100 FMREG + 0x1300 U2PHY_COM + u2 port2 0x2000 MISC + ... + u31 common 0x3000 DIG_GLB + 0x3100 PHYA_GLB + u31 port0 0x3400 DIG_LN_TOP + 0x3500 DIG_LN_TX0 + 0x3600 DIG_LN_RX0 + 0x3700 DIG_LN_DAIF + 0x3800 PHYA_LN + u31 port1 0x3a00 DIG_LN_TOP + 0x3b00 DIG_LN_TX0 + 0x3c00 DIG_LN_RX0 + 0x3d00 DIG_LN_DAIF + 0x3e00 PHYA_LN + ... + DIG_GLB & PHYA_GLB are shared by U31 ports. + +properties: + $nodename: + pattern: "^xs-phy@[0-9a-f]+$" + + compatible: + items: + - enum: + - mediatek,mt3611-xsphy + - mediatek,mt3612-xsphy + - const: mediatek,xsphy + + reg: + description: + Register shared by multiple U3 ports, exclude port's private register, + if only U2 ports provided, shouldn't use the property. + maxItems: 1 + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + + ranges: true + + mediatek,src-ref-clk-mhz: + description: + Frequency of reference clock for slew rate calibrate + default: 26 + + mediatek,src-coef: + description: + Coefficient for slew rate calibrate, depends on SoC process + $ref: /schemas/types.yaml#/definitions/uint32 + default: 17 + +# Required child node: +patternProperties: + "^usb-phy@[0-9a-f]+$": + type: object + description: + A sub-node is required for each port the controller provides. + Address range information including the usual 'reg' property + is used inside these nodes to describe the controller's topology. + + properties: + reg: + maxItems: 1 + + clocks: + items: + - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz) + + clock-names: + items: + - const: ref + + "#phy-cells": + const: 1 + description: | + The cells contain the following arguments. + + - description: The PHY type + enum: + - PHY_TYPE_USB2 + - PHY_TYPE_USB3 + + # The following optional vendor properties are only for debug or HQA test + mediatek,eye-src: + description: + The value of slew rate calibrate (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,eye-vrt: + description: + The selection of VRT reference voltage (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,eye-term: + description: + The selection of HS_TX TERM reference voltage (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,efuse-intr: + description: + The selection of Internal Resistor (U2/U3 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 63 + + mediatek,efuse-tx-imp: + description: + The selection of TX Impedance (U3 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 31 + + mediatek,efuse-rx-imp: + description: + The selection of RX Impedance (U3 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 31 + + required: + - reg + - clocks + - clock-names + - "#phy-cells" + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + + u3phy: xs-phy@11c40000 { + compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy"; + reg = <0x11c43000 0x0200>; + mediatek,src-ref-clk-mhz = <26>; + mediatek,src-coef = <17>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + u2port0: usb-phy@11c40000 { + reg = <0x11c40000 0x0400>; + clocks = <&clk48m>; + clock-names = "ref"; + mediatek,eye-src = <4>; + #phy-cells = <1>; + }; + + u3port0: usb-phy@11c43000 { + reg = <0x11c43400 0x0500>; + clocks = <&clk26m>; + clock-names = "ref"; + mediatek,efuse-intr = <28>; + #phy-cells = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt deleted file mode 100644 index dd75b676b71d..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt +++ /dev/null @@ -1,162 +0,0 @@ -MediaTek T-PHY binding --------------------------- - -T-phy controller supports physical layer functionality for a number of -controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA. - -Required properties (controller (parent) node): - - compatible : should be one of - "mediatek,generic-tphy-v1" - "mediatek,generic-tphy-v2" - "mediatek,mt2701-u3phy" (deprecated) - "mediatek,mt2712-u3phy" (deprecated) - "mediatek,mt8173-u3phy"; - make use of "mediatek,generic-tphy-v1" on mt2701 instead and - "mediatek,generic-tphy-v2" on mt2712 instead. - -- #address-cells: the number of cells used to represent physical - base addresses. -- #size-cells: the number of cells used to represent the size of an address. -- ranges: the address mapping relationship to the parent, defined with - - empty value: if optional 'reg' is used. - - non-empty value: if optional 'reg' is not used. should set - the child's base address to 0, the physical address - within parent's address space, and the length of - the address map. - -Required nodes : a sub-node is required for each port the controller - provides. Address range information including the usual - 'reg' property is used inside these nodes to describe - the controller's topology. - -Optional properties (controller (parent) node): - - reg : offset and length of register shared by multiple ports, - exclude port's private register. It is needed on mt2701 - and mt8173, but not on mt2712. - - mediatek,src-ref-clk-mhz : frequency of reference clock for slew rate - calibrate - - mediatek,src-coef : coefficient for slew rate calibrate, depends on - SoC process - -Required properties (port (child) node): -- reg : address and length of the register set for the port. -- #phy-cells : should be 1 (See second example) - cell after port phandle is phy type from: - - PHY_TYPE_USB2 - - PHY_TYPE_USB3 - - PHY_TYPE_PCIE - - PHY_TYPE_SATA - -Optional properties (PHY_TYPE_USB2 port (child) node): -- clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names -- clock-names : may contain - "ref": 48M reference clock for HighSpeed (digital) phy; and 26M - reference clock for SuperSpeed (digital) phy, sometimes is - 24M, 25M or 27M, depended on platform. - "da_ref": the reference clock of analog phy, used if the clocks - of analog and digital phys are separated, otherwise uses - "ref" clock only if needed. - -- mediatek,eye-src : u32, the value of slew rate calibrate -- mediatek,eye-vrt : u32, the selection of VRT reference voltage -- mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage -- mediatek,bc12 : bool, enable BC12 of u2phy if support it -- mediatek,discth : u32, the selection of disconnect threshold -- mediatek,intr : u32, the selection of internal R (resistance) - -Example: - -u3phy: usb-phy@11290000 { - compatible = "mediatek,mt8173-u3phy"; - reg = <0 0x11290000 0 0x800>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - u2port0: usb-phy@11290800 { - reg = <0 0x11290800 0 0x100>; - clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; - clock-names = "ref"; - #phy-cells = <1>; - }; - - u3port0: usb-phy@11290900 { - reg = <0 0x11290800 0 0x700>; - clocks = <&clk26m>; - clock-names = "ref"; - #phy-cells = <1>; - }; - - u2port1: usb-phy@11291000 { - reg = <0 0x11291000 0 0x100>; - clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; - clock-names = "ref"; - #phy-cells = <1>; - }; -}; - -Specifying phy control of devices ---------------------------------- - -Device nodes should specify the configuration required in their "phys" -property, containing a phandle to the phy port node and a device type; -phy-names for each port are optional. - -Example: - -#include <dt-bindings/phy/phy.h> - -usb30: usb@11270000 { - ... - phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>; - phy-names = "usb2-0", "usb3-0"; - ... -}; - - -Layout differences of banks between mt8173/mt2701 and mt2712 -------------------------------------------------------------- -mt8173 and mt2701: -port offset bank -shared 0x0000 SPLLC - 0x0100 FMREG -u2 port0 0x0800 U2PHY_COM -u3 port0 0x0900 U3PHYD - 0x0a00 U3PHYD_BANK2 - 0x0b00 U3PHYA - 0x0c00 U3PHYA_DA -u2 port1 0x1000 U2PHY_COM -u3 port1 0x1100 U3PHYD - 0x1200 U3PHYD_BANK2 - 0x1300 U3PHYA - 0x1400 U3PHYA_DA -u2 port2 0x1800 U2PHY_COM - ... - -mt2712: -port offset bank -u2 port0 0x0000 MISC - 0x0100 FMREG - 0x0300 U2PHY_COM -u3 port0 0x0700 SPLLC - 0x0800 CHIP - 0x0900 U3PHYD - 0x0a00 U3PHYD_BANK2 - 0x0b00 U3PHYA - 0x0c00 U3PHYA_DA -u2 port1 0x1000 MISC - 0x1100 FMREG - 0x1300 U2PHY_COM -u3 port1 0x1700 SPLLC - 0x1800 CHIP - 0x1900 U3PHYD - 0x1a00 U3PHYD_BANK2 - 0x1b00 U3PHYA - 0x1c00 U3PHYA_DA -u2 port2 0x2000 MISC - ... - - SPLLC shared by u3 ports and FMREG shared by u2 ports on -mt8173/mt2701 are put back into each port; a new bank MISC for -u2 ports and CHIP for u3 ports are added on mt2712. diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt b/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt deleted file mode 100644 index 5789029a1d42..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt +++ /dev/null @@ -1,38 +0,0 @@ -MediaTek Universal Flash Storage (UFS) M-PHY binding --------------------------------------------------------- - -UFS M-PHY nodes are defined to describe on-chip UFS M-PHY hardware macro. -Each UFS M-PHY node should have its own node. - -To bind UFS M-PHY with UFS host controller, the controller node should -contain a phandle reference to UFS M-PHY node. - -Required properties for UFS M-PHY nodes: -- compatible : Compatible list, contains the following controller: - "mediatek,mt8183-ufsphy" for ufs phy - persent on MT81xx chipsets. -- reg : Address and length of the UFS M-PHY register set. -- #phy-cells : This property shall be set to 0. -- clocks : List of phandle and clock specifier pairs. -- clock-names : List of clock input name strings sorted in the same - order as the clocks property. Following clocks are - mandatory. - "unipro": Unipro core control clock. - "mp": M-PHY core control clock. - -Example: - - ufsphy: phy@11fa0000 { - compatible = "mediatek,mt8183-ufsphy"; - reg = <0 0x11fa0000 0 0xc000>; - #phy-cells = <0>; - - clocks = <&infracfg_ao INFRACFG_AO_UNIPRO_SCK_CG>, - <&infracfg_ao INFRACFG_AO_UFS_MP_SAP_BCLK_CG>; - clock-names = "unipro", "mp"; - }; - - ufshci@11270000 { - ... - phys = <&ufsphy>; - }; diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt deleted file mode 100644 index e7caefa0b9c2..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt +++ /dev/null @@ -1,109 +0,0 @@ -MediaTek XS-PHY binding --------------------------- - -The XS-PHY controller supports physical layer functionality for USB3.1 -GEN2 controller on MediaTek SoCs. - -Required properties (controller (parent) node): - - compatible : should be "mediatek,<soc-model>-xsphy", "mediatek,xsphy", - soc-model is the name of SoC, such as mt3611 etc; - when using "mediatek,xsphy" compatible string, you need SoC specific - ones in addition, one of: - - "mediatek,mt3611-xsphy" - - - #address-cells, #size-cells : should use the same values as the root node - - ranges: must be present - -Optional properties (controller (parent) node): - - reg : offset and length of register shared by multiple U3 ports, - exclude port's private register, if only U2 ports provided, - shouldn't use the property. - - mediatek,src-ref-clk-mhz : u32, frequency of reference clock for slew rate - calibrate - - mediatek,src-coef : u32, coefficient for slew rate calibrate, depends on - SoC process - -Required nodes : a sub-node is required for each port the controller - provides. Address range information including the usual - 'reg' property is used inside these nodes to describe - the controller's topology. - -Required properties (port (child) node): -- reg : address and length of the register set for the port. -- clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names -- clock-names : must contain - "ref": 48M reference clock for HighSpeed analog phy; and 26M - reference clock for SuperSpeedPlus analog phy, sometimes is - 24M, 25M or 27M, depended on platform. -- #phy-cells : should be 1 - cell after port phandle is phy type from: - - PHY_TYPE_USB2 - - PHY_TYPE_USB3 - -The following optional properties are only for debug or HQA test -Optional properties (PHY_TYPE_USB2 port (child) node): -- mediatek,eye-src : u32, the value of slew rate calibrate -- mediatek,eye-vrt : u32, the selection of VRT reference voltage -- mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage -- mediatek,efuse-intr : u32, the selection of Internal Resistor - -Optional properties (PHY_TYPE_USB3 port (child) node): -- mediatek,efuse-intr : u32, the selection of Internal Resistor -- mediatek,efuse-tx-imp : u32, the selection of TX Impedance -- mediatek,efuse-rx-imp : u32, the selection of RX Impedance - -Banks layout of xsphy -------------------------------------------------------------- -port offset bank -u2 port0 0x0000 MISC - 0x0100 FMREG - 0x0300 U2PHY_COM -u2 port1 0x1000 MISC - 0x1100 FMREG - 0x1300 U2PHY_COM -u2 port2 0x2000 MISC - ... -u31 common 0x3000 DIG_GLB - 0x3100 PHYA_GLB -u31 port0 0x3400 DIG_LN_TOP - 0x3500 DIG_LN_TX0 - 0x3600 DIG_LN_RX0 - 0x3700 DIG_LN_DAIF - 0x3800 PHYA_LN -u31 port1 0x3a00 DIG_LN_TOP - 0x3b00 DIG_LN_TX0 - 0x3c00 DIG_LN_RX0 - 0x3d00 DIG_LN_DAIF - 0x3e00 PHYA_LN - ... - -DIG_GLB & PHYA_GLB are shared by U31 ports. - -Example: - -u3phy: usb-phy@11c40000 { - compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy"; - reg = <0 0x11c43000 0 0x0200>; - mediatek,src-ref-clk-mhz = <26>; - mediatek,src-coef = <17>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - u2port0: usb-phy@11c40000 { - reg = <0 0x11c40000 0 0x0400>; - clocks = <&clk48m>; - clock-names = "ref"; - mediatek,eye-src = <4>; - #phy-cells = <1>; - }; - - u3port0: usb-phy@11c43000 { - reg = <0 0x11c43400 0 0x0500>; - clocks = <&clk26m>; - clock-names = "ref"; - mediatek,efuse-intr = <28>; - #phy-cells = <1>; - }; -}; diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml index 0ba61979b970..46df6786727a 100644 --- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml +++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml @@ -45,6 +45,12 @@ properties: "#size-cells": const: 0 + vdda1v1-supply: + description: regulator providing 1V1 power supply to the PLL block + + vdda1v8-supply: + description: regulator providing 1V8 power supply to the PLL block + #Required child nodes: patternProperties: @@ -61,12 +67,6 @@ patternProperties: phy-supply: description: regulator providing 3V3 power supply to the PHY. - vdda1v1-supply: - description: regulator providing 1V1 power supply to the PLL block - - vdda1v8-supply: - description: regulator providing 1V8 power supply to the PLL block - "#phy-cells": enum: [ 0x0, 0x1 ] @@ -90,8 +90,6 @@ patternProperties: required: - reg - phy-supply - - vdda1v1-supply - - vdda1v8-supply - "#phy-cells" additionalProperties: false @@ -102,6 +100,8 @@ required: - clocks - "#address-cells" - "#size-cells" + - vdda1v1-supply + - vdda1v8-supply - usb-phy@0 - usb-phy@1 @@ -116,22 +116,20 @@ examples: reg = <0x5a006000 0x1000>; clocks = <&rcc USBPHY_K>; resets = <&rcc USBPHY_R>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; #address-cells = <1>; #size-cells = <0>; usbphyc_port0: usb-phy@0 { reg = <0>; phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; #phy-cells = <0>; }; usbphyc_port1: usb-phy@1 { reg = <1>; phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; #phy-cells = <1>; }; }; diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml index ec05db374645..626447fee092 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml @@ -25,19 +25,32 @@ properties: - qcom,msm8998-qmp-pcie-phy - qcom,msm8998-qmp-ufs-phy - qcom,msm8998-qmp-usb3-phy + - qcom,sc8180x-qmp-ufs-phy + - qcom,sc8180x-qmp-usb3-phy - qcom,sdm845-qhp-pcie-phy - qcom,sdm845-qmp-pcie-phy - qcom,sdm845-qmp-ufs-phy - qcom,sdm845-qmp-usb3-uni-phy - qcom,sm8150-qmp-ufs-phy + - qcom,sm8150-qmp-usb3-phy + - qcom,sm8150-qmp-usb3-uni-phy - qcom,sm8250-qmp-ufs-phy - qcom,sm8250-qmp-gen3x1-pcie-phy - qcom,sm8250-qmp-gen3x2-pcie-phy - qcom,sm8250-qmp-modem-pcie-phy + - qcom,sm8250-qmp-usb3-phy + - qcom,sm8250-qmp-usb3-uni-phy + - qcom,sm8350-qmp-ufs-phy + - qcom,sm8350-qmp-usb3-phy + - qcom,sm8350-qmp-usb3-uni-phy + - qcom,sdx55-qmp-usb3-uni-phy reg: + minItems: 1 + maxItems: 2 items: - description: Address and length of PHY's common serdes block. + - description: Address and length of PHY's DP_COM control block. "#clock-cells": enum: [ 1, 2 ] @@ -136,6 +149,32 @@ allOf: compatible: contains: enum: + - qcom,sdx55-qmp-usb3-uni-phy + then: + properties: + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + - description: 19.2 MHz ref clk. + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + reset-names: + items: + - const: phy + - const: common + - if: + properties: + compatible: + contains: + enum: - qcom,msm8996-qmp-pcie-phy then: properties: @@ -285,6 +324,64 @@ allOf: reset-names: items: - const: phy + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8150-qmp-usb3-phy + - qcom,sm8150-qmp-usb3-uni-phy + - qcom,sm8250-qmp-usb3-uni-phy + - qcom,sm8350-qmp-usb3-uni-phy + then: + properties: + clocks: + items: + - description: Phy aux clock. + - description: 19.2 MHz ref clk source. + - description: 19.2 MHz ref clk. + - description: Phy common block aux clock. + clock-names: + items: + - const: aux + - const: ref_clk_src + - const: ref + - const: com_aux + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + reset-names: + items: + - const: phy + - const: common + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8250-qmp-usb3-phy + - qcom,sm8350-qmp-usb3-phy + then: + properties: + clocks: + items: + - description: Phy aux clock. + - description: 19.2 MHz ref clk. + - description: Phy common block aux clock. + clock-names: + items: + - const: aux + - const: ref_clk_src + - const: com_aux + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + reset-names: + items: + - const: phy + - const: common examples: - | diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index d457fb6a4779..9f9cf07b7d45 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -21,6 +21,8 @@ properties: - qcom,ipq8074-qusb2-phy - qcom,msm8996-qusb2-phy - qcom,msm8998-qusb2-phy + - qcom,sdm660-qusb2-phy + - qcom,ipq6018-qusb2-phy - items: - enum: - qcom,sc7180-qusb2-phy diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml index ca6a0836b53c..abcc4373f39e 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - qcom,usb-hs-28nm-femtophy + - qcom,usb-hs-28nm-mdm9607 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml index 4949a2851532..ee77c6458326 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -17,6 +17,8 @@ properties: enum: - qcom,usb-snps-hs-7nm-phy - qcom,sm8150-usb-hs-phy + - qcom,sm8250-usb-hs-phy + - qcom,sm8350-usb-hs-phy - qcom,usb-snps-femto-v2-phy reg: diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt index 00aa2d349e55..57d28c0d5696 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt @@ -16,11 +16,11 @@ Optional properties: - drive-impedance-ohm: Specifies the drive impedance in Ohm. Possible values are 33, 40, 50, 66 and 100. If not set, the default value of 50 will be applied. - - enable-strobe-pulldown: Enable internal pull-down for the strobe line. - If not set, pull-down is not used. - - output-tapdelay-select: Specifies the phyctrl_otapdlysec register. - If not set, the register defaults to 0x4. - Maximum value 0xf. + - rockchip,enable-strobe-pulldown: Enable internal pull-down for the strobe + line. If not set, pull-down is not used. + - rockchip,output-tapdelay-select: Specifies the phyctrl_otapdlysec register. + If not set, the register defaults to 0x4. + Maximum value 0xf. Example: diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml index c33e9bc79521..bbbd85501ada 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -151,7 +151,7 @@ patternProperties: WIZ node should have '1' subnode for the SERDES. It could be either Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the bindings specified in - Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt + Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml Torrent SERDES should follow the bindings specified in Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index 9ba74e86751b..b0ab367896ab 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -94,7 +94,6 @@ available subsections can be seen below. pps ptp phy/index - pti_intel_mid pwm pldmfw/index rfkill diff --git a/Documentation/driver-api/pti_intel_mid.rst b/Documentation/driver-api/pti_intel_mid.rst deleted file mode 100644 index bacc2a4ee89f..000000000000 --- a/Documentation/driver-api/pti_intel_mid.rst +++ /dev/null @@ -1,108 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -============= -Intel MID PTI -============= - -The Intel MID PTI project is HW implemented in Intel Atom -system-on-a-chip designs based on the Parallel Trace -Interface for MIPI P1149.7 cJTAG standard. The kernel solution -for this platform involves the following files:: - - ./include/linux/pti.h - ./drivers/.../n_tracesink.h - ./drivers/.../n_tracerouter.c - ./drivers/.../n_tracesink.c - ./drivers/.../pti.c - -pti.c is the driver that enables various debugging features -popular on platforms from certain mobile manufacturers. -n_tracerouter.c and n_tracesink.c allow extra system information to -be collected and routed to the pti driver, such as trace -debugging data from a modem. Although n_tracerouter -and n_tracesink are a part of the complete PTI solution, -these two line disciplines can work separately from -pti.c and route any data stream from one /dev/tty node -to another /dev/tty node via kernel-space. This provides -a stable, reliable connection that will not break unless -the user-space application shuts down (plus avoids -kernel->user->kernel context switch overheads of routing -data). - -An example debugging usage for this driver system: - - * Hook /dev/ttyPTI0 to syslogd. Opening this port will also start - a console device to further capture debugging messages to PTI. - * Hook /dev/ttyPTI1 to modem debugging data to write to PTI HW. - This is where n_tracerouter and n_tracesink are used. - * Hook /dev/pti to a user-level debugging application for writing - to PTI HW. - * `Use mipi_` Kernel Driver API in other device drivers for - debugging to PTI by first requesting a PTI write address via - mipi_request_masterchannel(1). - -Below is example pseudo-code on how a 'privileged' application -can hook up n_tracerouter and n_tracesink to any tty on -a system. 'Privileged' means the application has enough -privileges to successfully manipulate the ldisc drivers -but is not just blindly executing as 'root'. Keep in mind -the use of ioctl(,TIOCSETD,) is not specific to the n_tracerouter -and n_tracesink line discpline drivers but is a generic -operation for a program to use a line discpline driver -on a tty port other than the default n_tty: - -.. code-block:: c - - /////////// To hook up n_tracerouter and n_tracesink ///////// - - // Note that n_tracerouter depends on n_tracesink. - #include <errno.h> - #define ONE_TTY "/dev/ttyOne" - #define TWO_TTY "/dev/ttyTwo" - - // needed global to hand onto ldisc connection - static int g_fd_source = -1; - static int g_fd_sink = -1; - - // these two vars used to grab LDISC values from loaded ldisc drivers - // in OS. Look at /proc/tty/ldiscs to get the right numbers from - // the ldiscs loaded in the system. - int source_ldisc_num, sink_ldisc_num = -1; - int retval; - - g_fd_source = open(ONE_TTY, O_RDWR); // must be R/W - g_fd_sink = open(TWO_TTY, O_RDWR); // must be R/W - - if (g_fd_source <= 0) || (g_fd_sink <= 0) { - // doubt you'll want to use these exact error lines of code - printf("Error on open(). errno: %d\n",errno); - return errno; - } - - retval = ioctl(g_fd_sink, TIOCSETD, &sink_ldisc_num); - if (retval < 0) { - printf("Error on ioctl(). errno: %d\n", errno); - return errno; - } - - retval = ioctl(g_fd_source, TIOCSETD, &source_ldisc_num); - if (retval < 0) { - printf("Error on ioctl(). errno: %d\n", errno); - return errno; - } - - /////////// To disconnect n_tracerouter and n_tracesink //////// - - // First make sure data through the ldiscs has stopped. - - // Second, disconnect ldiscs. This provides a - // little cleaner shutdown on tty stack. - sink_ldisc_num = 0; - source_ldisc_num = 0; - ioctl(g_fd_uart, TIOCSETD, &sink_ldisc_num); - ioctl(g_fd_gadget, TIOCSETD, &source_ldisc_num); - - // Three, program closes connection, and cleanup: - close(g_fd_uart); - close(g_fd_gadget); - g_fd_uart = g_fd_gadget = NULL; diff --git a/Documentation/fpga/dfl.rst b/Documentation/fpga/dfl.rst index 0404fe6ffc74..c41ac76ffaae 100644 --- a/Documentation/fpga/dfl.rst +++ b/Documentation/fpga/dfl.rst @@ -501,6 +501,34 @@ Developer only needs to provide a sub feature driver with matched feature id. FME Partial Reconfiguration Sub Feature driver (see drivers/fpga/dfl-fme-pr.c) could be a reference. +Location of DFLs on a PCI Device +================================ +The original method for finding a DFL on a PCI device assumed the start of the +first DFL to offset 0 of bar 0. If the first node of the DFL is an FME, +then further DFLs in the port(s) are specified in FME header registers. +Alternatively, a PCIe vendor specific capability structure can be used to +specify the location of all the DFLs on the device, providing flexibility +for the type of starting node in the DFL. Intel has reserved the +VSEC ID of 0x43 for this purpose. The vendor specific +data begins with a 4 byte vendor specific register for the number of DFLs followed 4 byte +Offset/BIR vendor specific registers for each DFL. Bits 2:0 of Offset/BIR register +indicates the BAR, and bits 31:3 form the 8 byte aligned offset where bits 2:0 are +zero. +:: + + +----------------------------+ + |31 Number of DFLS 0| + +----------------------------+ + |31 Offset 3|2 BIR 0| + +----------------------------+ + . . . + +----------------------------+ + |31 Offset 3|2 BIR 0| + +----------------------------+ + +Being able to specify more than one DFL per BAR has been considered, but it +was determined the use case did not provide value. Specifying a single DFL +per BAR simplifies the implementation and allows for extra error checking. Open discussion =============== diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst index 0b73acb44efa..169749efd8d1 100644 --- a/Documentation/trace/coresight/coresight.rst +++ b/Documentation/trace/coresight/coresight.rst @@ -512,6 +512,38 @@ The --itrace option controls the type and frequency of synthesized events Note that only 64-bit programs are currently supported - further work is required to support instruction decode of 32-bit Arm programs. +2.2) Tracing PID + +The kernel can be built to write the PID value into the PE ContextID registers. +For a kernel running at EL1, the PID is stored in CONTEXTIDR_EL1. A PE may +implement Arm Virtualization Host Extensions (VHE), which the kernel can +run at EL2 as a virtualisation host; in this case, the PID value is stored in +CONTEXTIDR_EL2. + +perf provides PMU formats that program the ETM to insert these values into the +trace data; the PMU formats are defined as below: + + "contextid1": Available on both EL1 kernel and EL2 kernel. When the + kernel is running at EL1, "contextid1" enables the PID + tracing; when the kernel is running at EL2, this enables + tracing the PID of guest applications. + + "contextid2": Only usable when the kernel is running at EL2. When + selected, enables PID tracing on EL2 kernel. + + "contextid": Will be an alias for the option that enables PID + tracing. I.e, + contextid == contextid1, on EL1 kernel. + contextid == contextid2, on EL2 kernel. + +perf will always enable PID tracing at the relevant EL, this is accomplished by +automatically enable the "contextid" config - but for EL2 it is possible to make +specific adjustments using configs "contextid1" and "contextid2", E.g. if a user +wants to trace PIDs for both host and guest, the two configs "contextid1" and +"contextid2" can be set at the same time: + + perf record -e cs_etm/contextid1,contextid2/u -- vm + Generating coverage files for Feedback Directed Optimization: AutoFDO --------------------------------------------------------------------- diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index 2fe16fb8c3af..599bd4493944 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -179,6 +179,7 @@ Code Seq# Include File Comments 'R' 00-1F linux/random.h conflict! 'R' 01 linux/rfkill.h conflict! 'R' C0-DF net/bluetooth/rfcomm.h +'R' E0 uapi/linux/fsl_mc.h 'S' all linux/cdrom.h conflict! 'S' 80-81 scsi/scsi_ioctl.h conflict! 'S' 82-FF scsi/scsi.h conflict! @@ -318,6 +319,7 @@ Code Seq# Include File Comments 0xA0 all linux/sdp/sdp.h Industrial Device Project <mailto:kenji@bitgate.com> 0xA1 0 linux/vtpm_proxy.h TPM Emulator Proxy Driver +0xA2 all uapi/linux/acrn.h ACRN hypervisor 0xA3 80-8F Port ACL in development: <mailto:tlewis@mindspring.com> 0xA3 90-9F linux/dtlk.h diff --git a/Documentation/virt/acrn/cpuid.rst b/Documentation/virt/acrn/cpuid.rst new file mode 100644 index 000000000000..65fa4b9c1798 --- /dev/null +++ b/Documentation/virt/acrn/cpuid.rst @@ -0,0 +1,46 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +ACRN CPUID bits +=============== + +A guest VM running on an ACRN hypervisor can check some of its features using +CPUID. + +ACRN cpuid functions are: + +function: 0x40000000 + +returns:: + + eax = 0x40000010 + ebx = 0x4e524341 + ecx = 0x4e524341 + edx = 0x4e524341 + +Note that this value in ebx, ecx and edx corresponds to the string +"ACRNACRNACRN". The value in eax corresponds to the maximum cpuid function +present in this leaf, and will be updated if more functions are added in the +future. + +function: define ACRN_CPUID_FEATURES (0x40000001) + +returns:: + + ebx, ecx, edx + eax = an OR'ed group of (1 << flag) + +where ``flag`` is defined as below: + +================================= =========== ================================ +flag value meaning +================================= =========== ================================ +ACRN_FEATURE_PRIVILEGED_VM 0 guest VM is a privileged VM +================================= =========== ================================ + +function: 0x40000010 + +returns:: + + ebx, ecx, edx + eax = (Virtual) TSC frequency in kHz. diff --git a/Documentation/virt/acrn/index.rst b/Documentation/virt/acrn/index.rst new file mode 100644 index 000000000000..b5f793e73df5 --- /dev/null +++ b/Documentation/virt/acrn/index.rst @@ -0,0 +1,12 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +ACRN Hypervisor +=============== + +.. toctree:: + :maxdepth: 1 + + introduction + io-request + cpuid diff --git a/Documentation/virt/acrn/introduction.rst b/Documentation/virt/acrn/introduction.rst new file mode 100644 index 000000000000..f8d081bc084d --- /dev/null +++ b/Documentation/virt/acrn/introduction.rst @@ -0,0 +1,43 @@ +.. SPDX-License-Identifier: GPL-2.0 + +ACRN Hypervisor Introduction +============================ + +The ACRN Hypervisor is a Type 1 hypervisor, running directly on bare-metal +hardware. It has a privileged management VM, called Service VM, to manage User +VMs and do I/O emulation. + +ACRN userspace is an application running in the Service VM that emulates +devices for a User VM based on command line configurations. ACRN Hypervisor +Service Module (HSM) is a kernel module in the Service VM which provides +hypervisor services to the ACRN userspace. + +Below figure shows the architecture. + +:: + + Service VM User VM + +----------------------------+ | +------------------+ + | +--------------+ | | | | + | |ACRN userspace| | | | | + | +--------------+ | | | | + |-----------------ioctl------| | | | ... + |kernel space +----------+ | | | | + | | HSM | | | | Drivers | + | +----------+ | | | | + +--------------------|-------+ | +------------------+ + +---------------------hypercall----------------------------------------+ + | ACRN Hypervisor | + +----------------------------------------------------------------------+ + | Hardware | + +----------------------------------------------------------------------+ + +ACRN userspace allocates memory for the User VM, configures and initializes the +devices used by the User VM, loads the virtual bootloader, initializes the +virtual CPU state and handles I/O request accesses from the User VM. It uses +ioctls to communicate with the HSM. HSM implements hypervisor services by +interacting with the ACRN Hypervisor via hypercalls. HSM exports a char device +interface (/dev/acrn_hsm) to userspace. + +The ACRN hypervisor is open for contribution from anyone. The source repo is +available at https://github.com/projectacrn/acrn-hypervisor. diff --git a/Documentation/virt/acrn/io-request.rst b/Documentation/virt/acrn/io-request.rst new file mode 100644 index 000000000000..6cc3ea0fa1f5 --- /dev/null +++ b/Documentation/virt/acrn/io-request.rst @@ -0,0 +1,97 @@ +.. SPDX-License-Identifier: GPL-2.0 + +I/O request handling +==================== + +An I/O request of a User VM, which is constructed by the hypervisor, is +distributed by the ACRN Hypervisor Service Module to an I/O client +corresponding to the address range of the I/O request. Details of I/O request +handling are described in the following sections. + +1. I/O request +-------------- + +For each User VM, there is a shared 4-KByte memory region used for I/O requests +communication between the hypervisor and Service VM. An I/O request is a +256-byte structure buffer, which is 'struct acrn_io_request', that is filled by +an I/O handler of the hypervisor when a trapped I/O access happens in a User +VM. ACRN userspace in the Service VM first allocates a 4-KByte page and passes +the GPA (Guest Physical Address) of the buffer to the hypervisor. The buffer is +used as an array of 16 I/O request slots with each I/O request slot being 256 +bytes. This array is indexed by vCPU ID. + +2. I/O clients +-------------- + +An I/O client is responsible for handling User VM I/O requests whose accessed +GPA falls in a certain range. Multiple I/O clients can be associated with each +User VM. There is a special client associated with each User VM, called the +default client, that handles all I/O requests that do not fit into the range of +any other clients. The ACRN userspace acts as the default client for each User +VM. + +Below illustration shows the relationship between I/O requests shared buffer, +I/O requests and I/O clients. + +:: + + +------------------------------------------------------+ + | Service VM | + |+--------------------------------------------------+ | + || +----------------------------------------+ | | + || | shared page ACRN userspace | | | + || | +-----------------+ +------------+ | | | + || +----+->| acrn_io_request |<-+ default | | | | + || | | | +-----------------+ | I/O client | | | | + || | | | | ... | +------------+ | | | + || | | | +-----------------+ | | | + || | +-|--------------------------------------+ | | + ||---|----|-----------------------------------------| | + || | | kernel | | + || | | +----------------------+ | | + || | | | +-------------+ HSM | | | + || | +--------------+ | | | | + || | | | I/O clients | | | | + || | | | | | | | + || | | +-------------+ | | | + || | +----------------------+ | | + |+---|----------------------------------------------+ | + +----|-------------------------------------------------+ + | + +----|-------------------------------------------------+ + | +-+-----------+ | + | | I/O handler | ACRN Hypervisor | + | +-------------+ | + +------------------------------------------------------+ + +3. I/O request state transition +------------------------------- + +The state transitions of an ACRN I/O request are as follows. + +:: + + FREE -> PENDING -> PROCESSING -> COMPLETE -> FREE -> ... + +- FREE: this I/O request slot is empty +- PENDING: a valid I/O request is pending in this slot +- PROCESSING: the I/O request is being processed +- COMPLETE: the I/O request has been processed + +An I/O request in COMPLETE or FREE state is owned by the hypervisor. HSM and +ACRN userspace are in charge of processing the others. + +4. Processing flow of I/O requests +---------------------------------- + +a. The I/O handler of the hypervisor will fill an I/O request with PENDING + state when a trapped I/O access happens in a User VM. +b. The hypervisor makes an upcall, which is a notification interrupt, to + the Service VM. +c. The upcall handler schedules a worker to dispatch I/O requests. +d. The worker looks for the PENDING I/O requests, assigns them to different + registered clients based on the address of the I/O accesses, updates + their state to PROCESSING, and notifies the corresponding client to handle. +e. The notified client handles the assigned I/O requests. +f. The HSM updates I/O requests states to COMPLETE and notifies the hypervisor + of the completion via hypercalls. diff --git a/Documentation/virt/index.rst b/Documentation/virt/index.rst index 350f5c869b56..edea7fea95a8 100644 --- a/Documentation/virt/index.rst +++ b/Documentation/virt/index.rst @@ -12,6 +12,7 @@ Linux Virtualization Support paravirt_ops guest-halt-polling ne_overview + acrn/index .. only:: html and subproject |