summaryrefslogtreecommitdiff
path: root/arch/arc/plat-arcfpga
diff options
context:
space:
mode:
authorVineet Gupta <vgupta@synopsys.com>2014-06-03 13:28:32 +0530
committerVineet Gupta <vgupta@synopsys.com>2014-06-03 13:28:32 +0530
commitc00bfd974fb0b7a5a501aebada2a94945e38a9a5 (patch)
treee36f63dce62f4a10beaadb6381f5b5693d7d6563 /arch/arc/plat-arcfpga
parent26bc8a9fcf4f9b3a562daaf28cf3ebda4fb80c65 (diff)
ARC: [arcfpga] Get rid of legacy BVCI latency unit support
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Diffstat (limited to 'arch/arc/plat-arcfpga')
-rw-r--r--arch/arc/plat-arcfpga/Kconfig32
-rw-r--r--arch/arc/plat-arcfpga/platform.c55
2 files changed, 0 insertions, 87 deletions
diff --git a/arch/arc/plat-arcfpga/Kconfig b/arch/arc/plat-arcfpga/Kconfig
index 33058aa40e77..e27bb5cc3c1e 100644
--- a/arch/arc/plat-arcfpga/Kconfig
+++ b/arch/arc/plat-arcfpga/Kconfig
@@ -48,36 +48,4 @@ config ARC_SERIAL_BAUD
help
Baud rate for the ARC UART
-menuconfig ARC_HAS_BVCI_LAT_UNIT
- bool "BVCI Bus Latency Unit"
- depends on ARC_BOARD_ML509 || ARC_BOARD_ANGEL4
- help
- IP to add artificial latency to BVCI Bus Based FPGA builds.
- The default latency (even worst case) for FPGA is non-realistic
- (~10 SDRAM, ~5 SSRAM).
-
-config BVCI_LAT_UNITS
- hex "Latency Unit(s) Bitmap"
- default "0x0"
- depends on ARC_HAS_BVCI_LAT_UNIT
- help
- There are multiple Latency Units corresponding to the many
- interfaces of the system bus arbiter (both CPU side as well as
- the peripheral side).
- To add latency to ALL memory transaction, choose Unit 0, otherwise
- for finer grainer - interface wise latency, specify a bitmap (1 bit
- per unit) of all units. e.g. 1,2,12 will be 0x1003
-
- Unit 0 - System Arb and Mem Controller
- Unit 1 - I$ and System Bus
- Unit 2 - D$ and System Bus
- ..
- Unit 12 - IDE Disk controller and System Bus
-
-config BVCI_LAT_CYCLES
- int "Latency Value in cycles"
- range 0 63
- default "30"
- depends on ARC_HAS_BVCI_LAT_UNIT
-
endif
diff --git a/arch/arc/plat-arcfpga/platform.c b/arch/arc/plat-arcfpga/platform.c
index 213394a15cd2..f09e771b4bbd 100644
--- a/arch/arc/plat-arcfpga/platform.c
+++ b/arch/arc/plat-arcfpga/platform.c
@@ -22,59 +22,6 @@
#include <plat/smp.h>
#include <plat/irq.h>
-/*-----------------------BVCI Latency Unit -----------------------------*/
-
-#ifdef CONFIG_ARC_HAS_BVCI_LAT_UNIT
-
-int lat_cycles = CONFIG_BVCI_LAT_CYCLES;
-
-/* BVCI Bus Profiler: Latency Unit */
-static void __init setup_bvci_lat_unit(void)
-{
-#define MAX_BVCI_UNITS 12
-
- unsigned int i;
- unsigned int *base = (unsigned int *)BVCI_LAT_UNIT_BASE;
- const unsigned long units_req = CONFIG_BVCI_LAT_UNITS;
- const unsigned int REG_UNIT = 21;
- const unsigned int REG_VAL = 22;
-
- /*
- * There are multiple Latency Units corresponding to the many
- * interfaces of the system bus arbiter (both CPU side as well as
- * the peripheral side).
- *
- * Unit 0 - System Arb and Mem Controller - adds latency to all
- * memory trasactions
- * Unit 1 - I$ and System Bus
- * Unit 2 - D$ and System Bus
- * ..
- * Unit 12 - IDE Disk controller and System Bus
- *
- * The programmers model requires writing to lat_unit reg first
- * and then the latency value (cycles) to lat_value reg
- */
-
- if (CONFIG_BVCI_LAT_UNITS == 0) {
- writel(0, base + REG_UNIT);
- writel(lat_cycles, base + REG_VAL);
- pr_info("BVCI Latency for all Memory Transactions %d cycles\n",
- lat_cycles);
- } else {
- for_each_set_bit(i, &units_req, MAX_BVCI_UNITS) {
- writel(i + 1, base + REG_UNIT); /* loop is 0 based */
- writel(lat_cycles, base + REG_VAL);
- pr_info("BVCI Latency for Unit[%d] = %d cycles\n",
- (i + 1), lat_cycles);
- }
- }
-}
-#else
-static void __init setup_bvci_lat_unit(void)
-{
-}
-#endif
-
/*----------------------- Platform Devices -----------------------------*/
#if IS_ENABLED(CONFIG_SERIAL_ARC)
@@ -165,8 +112,6 @@ static void __init plat_fpga_early_init(void)
{
pr_info("[plat-arcfpga]: registering early dev resources\n");
- setup_bvci_lat_unit();
-
arc_fpga_serial_init();
#ifdef CONFIG_ISS_SMP_EXTN