summaryrefslogtreecommitdiff
path: root/arch/arc/plat-axs10x
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-05-19 09:46:18 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2016-05-19 09:46:18 -0700
commit0efacbbaee1e94e9942da0912f5b46ffd45a74bd (patch)
treea17933437de955f4ce5e74760610bab75f2ae385 /arch/arc/plat-axs10x
parentf4f27d0028aabce57e44c16c2fdefccd6310d2f3 (diff)
parent776d7f1694a7d678291354a05f0243965708306a (diff)
Merge tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC updates from Vineet Gupta: "We have a relatively big changeset for ARC for 4.7. The highlight is support for EZChip (now Mellanox) NPS-400 network processor, a 400-Gb throughput C-programmable packet processor based on ARC700 cores from Synopsys. See http://www.mellanox.com/related-docs/prod_npu/PB_NPS-400.pdf Also present are irqchip and clocksource drivers for NPS as agreed with respective maintainers to go via ARC tree due to an soc header dependency. I have the needed ACKs from Jason, Marc, Daniel. You might run into a trivial merge conflict in drivers/irqchip/* This EZChip platform support required some deep changes in ARC architecture code and also opportunity to cleanup past sins (legacy irq domains, missing irq domain lookup, hard coded timer irqs...) Summary: - Support for EZChip (now Mellanox) NPS-400 Network processor based on ARC700 - NPS interrupt controller and clocksource drivers - ARC timers probed off DT - ARC iqrchips switching to linear domain (upgrade from legacy domains)" * tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (37 commits) arc: axs103_smp: Fix CPU frequency to 100MHz for dual-core arc: axs10x: Add DT bindings for I2S PLL Clock ARC: pae: STRICT_MM_TYPECHECKS was broken ARC: Add eznps platform to Kconfig and Makefile ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE ARC: [plat-eznps] Use dedicated cpu_relax() ARC: [plat-eznps] Use dedicated identity auxiliary register. ARC: [plat-eznps] Use dedicated SMP barriers ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg ARC: [plat-eznps] Use dedicated user stack top ARC: [plat-eznps] Add eznps platform ARC: [plat-eznps] Add eznps board defconfig and dts ARC: Mark secondary cpu online only after all HW setup is done ARC: rwlock: disable interrupts in !LLSC variant ARC: Make vmalloc size configurable ARC: clean out UAPI byteorder.h clean off Kconfig symbol irqchip: add nps Internal and external irqchips clocksource: Add NPS400 timers driver soc: Support for EZchip SoC Documentation: Add EZchip vendor to binding list ...
Diffstat (limited to 'arch/arc/plat-axs10x')
-rw-r--r--arch/arc/plat-axs10x/axs10x.c27
1 files changed, 20 insertions, 7 deletions
diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
index 1b0f0f458a2b..86548701023c 100644
--- a/arch/arc/plat-axs10x/axs10x.c
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -14,10 +14,11 @@
*
*/
+#include <linux/of_fdt.h>
#include <linux/of_platform.h>
+#include <linux/libfdt.h>
#include <asm/asm-offsets.h>
-#include <asm/clk.h>
#include <asm/io.h>
#include <asm/mach_desc.h>
#include <asm/mcip.h>
@@ -389,6 +390,13 @@ axs103_set_freq(unsigned int id, unsigned int fd, unsigned int od)
static void __init axs103_early_init(void)
{
+ int offset = fdt_path_offset(initial_boot_params, "/cpu_card/core_clk");
+ const struct fdt_property *prop = fdt_get_property(initial_boot_params,
+ offset,
+ "clock-frequency",
+ NULL);
+ u32 freq = be32_to_cpu(*(u32*)(prop->data)) / 1000000, orig = freq;
+
/*
* AXS103 configurations for SMP/QUAD configurations share device tree
* which defaults to 90 MHz. However recent failures of Quad config
@@ -401,12 +409,10 @@ static void __init axs103_early_init(void)
#ifdef CONFIG_ARC_MCIP
unsigned int num_cores = (read_aux_reg(ARC_REG_MCIP_BCR) >> 16) & 0x3F;
if (num_cores > 2)
- arc_set_core_freq(50 * 1000000);
- else if (num_cores == 2)
- arc_set_core_freq(75 * 1000000);
+ freq = 50;
#endif
- switch (arc_get_core_freq()/1000000) {
+ switch (freq) {
case 33:
axs103_set_freq(1, 1, 1);
break;
@@ -431,11 +437,18 @@ static void __init axs103_early_init(void)
* DT "clock-frequency" might not match with board value.
* Hence update it to match the board value.
*/
- arc_set_core_freq(axs103_get_freq() * 1000000);
+ freq = axs103_get_freq();
break;
}
- pr_info("Freq is %dMHz\n", axs103_get_freq());
+ pr_info("Freq is %dMHz\n", freq);
+
+ /* Patching .dtb in-place with new core clock value */
+ if (freq != orig ) {
+ freq = cpu_to_be32(freq * 1000000);
+ fdt_setprop_inplace(initial_boot_params, offset,
+ "clock-frequency", &freq, sizeof(freq));
+ }
/* Memory maps already config in pre-bootloader */