Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:

 - Generalise byte swapping assembly

 - Update debug addresses for STI

 - Validate start of physical memory with DTB

 - Do not clear SCTLR.nTLSMD in decompressor

 - amba/locomo/sa1111 devices remove method return type is void

 - address markers for KASAN in page table dump

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled
  ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void
  amba: Make use of bus_type functions
  amba: Make the remove callback return void
  vfio: platform: simplify device removal
  amba: reorder functions
  amba: Fix resource leak for drivers without .remove
  ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header
  ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions
  ARM: 9051/1: vdso: remove unneded extra-y addition
  ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible
  ARM: 9049/1: locomo: make locomo bus's remove callback return void
  ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void
  ARM: 9047/1: smp: remove unused variable
  ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores
  ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB
  ARM: 9042/1: debug: no uncompress debugging while semihosting
  ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support
  ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART
  ARM: 9039/1: assembler: generalize byte swapping macro into rev_l

1 files changed, 28 insertions, 12 deletions

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index c36c5d4c6e9c..9e0b5e7f12af 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1158,10 +1158,9 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on ST SPEAr13xx based platforms.
 
-	config STIH41X_DEBUG_ASC2
+	config DEBUG_STIH41X_ASC2
 		bool "Use StiH415/416 ASC2 UART for low-level debug"
 		depends on ARCH_STI
-		select DEBUG_STI_UART
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on STiH415/416 based platforms like b2000, which has
@@ -1169,10 +1168,9 @@ choice
 
 		  If unsure, say N.
 
-	config STIH41X_DEBUG_SBC_ASC1
+	config DEBUG_STIH41X_SBC_ASC1
 		bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
 		depends on ARCH_STI
-		select DEBUG_STI_UART
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on STiH415/416 based platforms like b2020. which has
@@ -1180,6 +1178,16 @@ choice
 
 		  If unsure, say N.
 
+	config DEBUG_STIH418_SBC_ASC0
+		bool "Use StiH418 SBC ASC0 UART for low-level debug"
+		depends on ARCH_STI
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STiH418 based platforms which has default UART wired
+		  up to SBC ASC0.
+
+		  If unsure, say N.
+
 	config STM32F4_DEBUG_UART
 		bool "Use STM32F4 UART for low-level debug"
 		depends on MACH_STM32F429 || MACH_STM32F469
@@ -1484,10 +1492,6 @@ config DEBUG_TEGRA_UART
 	bool
 	depends on ARCH_TEGRA
 
-config DEBUG_STI_UART
-	bool
-	depends on ARCH_STI
-
 config DEBUG_STM32_UART
 	bool
 	depends on ARCH_STM32
@@ -1546,7 +1550,9 @@ config DEBUG_LL_INCLUDE
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
 	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
 	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
-	default "debug/sti.S" if DEBUG_STI_UART
+	default "debug/sti.S" if DEBUG_STIH41X_ASC2
+	default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
+	default "debug/sti.S" if DEBUG_STIH418_SBC_ASC0
 	default "debug/stm32.S" if DEBUG_STM32_UART
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
 	default "debug/ux500.S" if DEBUG_UX500_UART
@@ -1579,6 +1585,7 @@ config DEBUG_UART_PHYS
 	default 0x02531000 if DEBUG_KEYSTONE_UART1
 	default 0x03010fe0 if ARCH_RPC
 	default 0x07000000 if DEBUG_SUN9I_UART0
+	default 0x09530000 if DEBUG_STIH418_SBC_ASC0
 	default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
 				DEBUG_VEXPRESS_UART0_CA9
 	default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
@@ -1671,7 +1678,9 @@ config DEBUG_UART_PHYS
 	default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfcb00000 if DEBUG_HI3620_UART
 	default 0xfd883000 if DEBUG_ALPINE_UART0
+	default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1
 	default 0xfe800000 if ARCH_IOP32X
+	default 0xfed32000 if DEBUG_STIH41X_ASC2
 	default 0xff690000 if DEBUG_RK32_UART2
 	default 0xffc02000 if DEBUG_SOCFPGA_UART0
 	default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1
@@ -1699,7 +1708,9 @@ config DEBUG_UART_PHYS
 		DEBUG_S3C64XX_UART || \
 		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_DIGICOLOR_UA0 || \
-		DEBUG_AT91_UART || DEBUG_STM32_UART
+		DEBUG_AT91_UART || DEBUG_STM32_UART || \
+		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
+		DEBUG_STIH418_SBC_ASC0
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
@@ -1744,6 +1755,7 @@ config DEBUG_UART_VIRT
 	default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
 	default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
 	default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
+	default 0xf9530000 if DEBUG_STIH418_SBC_ASC0
 	default 0xf9e09000 if DEBUG_AM33XXUART1
 	default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
 	default 0xfa022000 if DEBUG_TI81XXUART2
@@ -1762,7 +1774,9 @@ config DEBUG_UART_VIRT
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfcfe8600 if DEBUG_BCM63XX_UART
 	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
+	default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1
 	default 0xfd883000 if DEBUG_ALPINE_UART0
+	default 0xfdd32000 if DEBUG_STIH41X_ASC2
 	default 0xfe010000 if STM32MP1_DEBUG_UART
 	default 0xfe017000 if DEBUG_MMP_UART2
 	default 0xfe018000 if DEBUG_MMP_UART3
@@ -1803,7 +1817,9 @@ config DEBUG_UART_VIRT
 		DEBUG_S3C64XX_UART || \
 		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_DIGICOLOR_UA0 || \
-		DEBUG_AT91_UART || DEBUG_STM32_UART
+		DEBUG_AT91_UART || DEBUG_STM32_UART || \
+		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
+		DEBUG_STIH418_SBC_ASC0
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
@@ -1837,7 +1853,7 @@ config DEBUG_UNCOMPRESS
 	depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
 	depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
 		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
-		     !DEBUG_BRCMSTB_UART
+		     !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING
 	help
 	  This option influences the normal decompressor output for
 	  multiplatform kernels.  Normally, multiplatform kernels disable