ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 406 deletions

diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
deleted file mode 100644
index 820033727088..000000000000
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ /dev/null
@@ -1,406 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
- *
- *  Copyright (C) 2014 Atmel,
- *		  2014 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-/dts-v1/;
-#include "sama5d36.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "SAMA5D3 Xplained";
-	compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x10000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			mmc0: mmc@f0000000 {
-				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
-				vmmc-supply = <&vcc_mmc0_reg>;
-				vqmmc-supply = <&vcc_3v3_reg>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <8>;
-					cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
-				};
-			};
-
-			mmc1: mmc@f8000000 {
-				vmmc-supply = <&vcc_3v3_reg>;
-				vqmmc-supply = <&vcc_3v3_reg>;
-				status = "disabled";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
-				};
-			};
-
-			spi0: spi@f0004000 {
-				pinctrl-names = "default", "cs";
-				pinctrl-1 = <&pinctrl_spi0_cs>;
-				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
-				status = "okay";
-			};
-
-			can0: can@f000c000 {
-				status = "okay";
-			};
-
-			tcb0: timer@f0010000 {
-				timer0: timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>;
-				};
-
-				timer1: timer@1 {
-					compatible = "atmel,tcb-timer";
-					reg = <1>;
-				};
-			};
-
-			i2c0: i2c@f0014000 {
-				pinctrl-0 = <&pinctrl_i2c0_pu>;
-				status = "okay";
-			};
-
-			i2c1: i2c@f0018000 {
-				status = "okay";
-
-				pmic: act8865@5b {
-					compatible = "active-semi,act8865";
-					reg = <0x5b>;
-					status = "disabled";
-
-					regulators {
-						vcc_1v8_reg: DCDC_REG1 {
-							regulator-name = "VCC_1V8";
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <1800000>;
-							regulator-always-on;
-						};
-
-						vcc_1v2_reg: DCDC_REG2 {
-							regulator-name = "VCC_1V2";
-							regulator-min-microvolt = <1200000>;
-							regulator-max-microvolt = <1200000>;
-							regulator-always-on;
-						};
-
-						vcc_3v3_reg: DCDC_REG3 {
-							regulator-name = "VCC_3V3";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-
-						vddfuse_reg: LDO_REG1 {
-							regulator-name = "FUSE_2V5";
-							regulator-min-microvolt = <2500000>;
-							regulator-max-microvolt = <2500000>;
-						};
-
-						vddana_reg: LDO_REG2 {
-							regulator-name = "VDDANA";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-					};
-				};
-			};
-
-			macb0: ethernet@f0028000 {
-				phy-mode = "rgmii-rxid";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "okay";
-
-				ethernet-phy@7 {
-					reg = <0x7>;
-				};
-			};
-
-			pwm0: pwm@f002c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>;
-				status = "okay";
-			};
-
-			usart0: serial@f001c000 {
-				status = "okay";
-			};
-
-			usart1: serial@f0020000 {
-				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
-				status = "okay";
-			};
-
-			uart0: serial@f0024000 {
-				status = "okay";
-			};
-
-			mmc1: mmc@f8000000 {
-				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			spi1: spi@f8008000 {
-				pinctrl-names = "default", "cs";
-				pinctrl-1 = <&pinctrl_spi1_cs>;
-				cs-gpios = <&pioC 25 0>;
-				status = "okay";
-			};
-
-			adc0: adc@f8018000 {
-				atmel,adc-vref = <3300>;
-				atmel,adc-channels-used = <0xfe>;
-				pinctrl-0 = <
-					&pinctrl_adc0_adtrg
-					&pinctrl_adc0_ad1
-					&pinctrl_adc0_ad2
-					&pinctrl_adc0_ad3
-					&pinctrl_adc0_ad4
-					&pinctrl_adc0_ad5
-					&pinctrl_adc0_ad6
-					&pinctrl_adc0_ad7
-					>;
-				status = "okay";
-			};
-
-			i2c2: i2c@f801c000 {
-				dmas = <0>, <0>;	/* Do not use DMA for i2c2 */
-				pinctrl-0 = <&pinctrl_i2c2_pu>;
-				status = "okay";
-			};
-
-			macb1: ethernet@f802c000 {
-				phy-mode = "rmii";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "okay";
-
-				ethernet-phy@1 {
-					reg = <0x1>;
-				};
-			};
-
-			dbgu: serial@ffffee00 {
-				status = "okay";
-			};
-
-			pinctrl@fffff200 {
-				board {
-					pinctrl_i2c0_pu: i2c0_pu {
-						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_i2c2_pu: i2c2_pu {
-						atmel,pins =
-							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_key_gpio: key_gpio_0 {
-						atmel,pins =
-							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-
-					pinctrl_mmc0_cd: mmc0_cd {
-						atmel,pins =
-							<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-
-					pinctrl_mmc1_cd: mmc1_cd {
-						atmel,pins =
-							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-
-					pinctrl_usba_vbus: usba_vbus {
-						atmel,pins =
-							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
-					};
-					pinctrl_usb_default: usb_default {
-						atmel,pins =
-							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-							 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_gpio_leds: gpio_leds_default {
-						atmel,pins =
-							<AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-							 AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_spi0_cs: spi0_cs_default {
-						atmel,pins =
-							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
-							 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_spi1_cs: spi1_cs_default {
-						atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default {
-						atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-				};
-			};
-		};
-
-		usb0: gadget@500000 {
-			atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;	/* PE9, conflicts with A9 */
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "okay";
-		};
-
-		usb1: ohci@600000 {
-			num-ports = <3>;
-			atmel,vbus-gpio = <0
-					   &pioE 3 GPIO_ACTIVE_LOW
-					   &pioE 4 GPIO_ACTIVE_LOW
-					  >;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb_default>;
-			status = "okay";
-		};
-
-		usb2: ehci@700000 {
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			pinctrl-0 = <&pinctrl_ebi_nand_addr>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-
-				nand@3 {
-					reg = <0x3 0x0 0x2>;
-					atmel,rb = <0>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "hw";
-					nand-ecc-strength = <4>;
-					nand-ecc-step-size = <512>;
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x40000>;
-						};
-
-						bootloader@40000 {
-							label = "bootloader";
-							reg = <0x40000 0xc0000>;
-						};
-
-						bootloaderenvred@100000 {
-							label = "bootloader env redundant";
-							reg = <0x100000 0x40000>;
-						};
-
-						bootloaderenv@140000 {
-							label = "bootloader env";
-							reg = <0x140000 0x40000>;
-						};
-
-						dtb@180000 {
-							label = "device tree";
-							reg = <0x180000 0x80000>;
-						};
-
-						kernel@200000 {
-							label = "kernel";
-							reg = <0x200000 0x600000>;
-						};
-
-						rootfs@800000 {
-							label = "rootfs";
-							reg = <0x800000 0x0f800000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	vcc_mmc0_reg: fixedregulator_mmc0 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
-		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
-		regulator-name = "mmc0-card-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio>;
-
-		button {
-			label = "PB_USER";
-			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PROG1>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-		status = "okay";
-
-		led-d2 {
-			label = "d2";
-			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-d3 {
-			label = "d3"; /* Conflict with EBI CS0, USART2 CTS. */
-			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};