ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 276 deletions

diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
deleted file mode 100644
index a57351270551..000000000000
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ /dev/null
@@ -1,276 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board
- *
- *  Copyright (C) 2014 Microchip
- *  Alexandre Belloni <alexandre.belloni@free-electrons.com>
- */
-/dts-v1/;
-#include "at91sam9rl.dtsi"
-
-/ {
-	model = "Atmel at91sam9rlek";
-	compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		fb0: fb@500000 {
-			display = <&display0>;
-			status = "okay";
-
-			display0: panel {
-				bits-per-pixel = <16>;
-				atmel,lcdcon-backlight;
-				atmel,dmacon = <0x1>;
-				atmel,lcdcon2 = <0x80008002>;
-				atmel,guard-time = <1>;
-				atmel,lcd-wiring-mode = "RGB";
-
-				display-timings {
-					native-mode = <&timing0>;
-					timing0: timing0 {
-						clock-frequency = <4965000>;
-						hactive = <240>;
-						vactive = <320>;
-						hback-porch = <1>;
-						hfront-porch = <33>;
-						vback-porch = <1>;
-						vfront-porch = <0>;
-						hsync-len = <5>;
-						vsync-len = <1>;
-						hsync-active = <1>;
-						vsync-active = <1>;
-					};
-				};
-			};
-		};
-
-		ebi: ebi@10000000 {
-			pinctrl-0 = <&pinctrl_ebi_addr_nand>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_oe_we
-					     &pinctrl_nand_cs
-					     &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x40000>;
-						};
-
-						bootloader@40000 {
-							label = "bootloader";
-							reg = <0x40000 0x80000>;
-						};
-
-						bootloaderenv@c0000 {
-							label = "bootloader env";
-							reg = <0xc0000 0xc0000>;
-						};
-
-						dtb@180000 {
-							label = "device tree";
-							reg = <0x180000 0x80000>;
-						};
-
-						kernel@200000 {
-							label = "kernel";
-							reg = <0x200000 0x600000>;
-						};
-
-						rootfs@800000 {
-							label = "rootfs";
-							reg = <0x800000 0x0f800000>;
-						};
-					};
-				};
-			};
-		};
-
-		apb {
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			mmc0: mmc@fffa4000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc0
-					&pinctrl_mmc0_clk
-					&pinctrl_mmc0_slot0_cmd_dat0
-					&pinctrl_mmc0_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			usart0: serial@fffb0000 {
-				pinctrl-0 = <
-					&pinctrl_usart0
-					&pinctrl_usart0_rts
-					&pinctrl_usart0_cts>;
-				status = "okay";
-			};
-
-			adc0: adc@fffd0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <
-					&pinctrl_adc0_ad0
-					&pinctrl_adc0_ad1
-					&pinctrl_adc0_ad2
-					&pinctrl_adc0_ad3
-					&pinctrl_adc0_ad4
-					&pinctrl_adc0_ad5
-					&pinctrl_adc0_adtrg>;
-				atmel,adc-ts-wires = <4>;
-				status = "okay";
-			};
-
-			usb0: gadget@fffd4000 {
-				atmel,vbus-gpio = <&pioA 8 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			spi0: spi@fffcc000 {
-				status = "okay";
-				cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
-				flash@0 {
-					compatible = "atmel,at45", "atmel,dataflash";
-					spi-max-frequency = <15000000>;
-					reg = <0>;
-				};
-			};
-
-			pwm0: pwm@fffc8000 {
-				status = "okay";
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_pwm0_pwm1_2>,
-					<&pinctrl_pwm0_pwm2_2>;
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			pinctrl@fffff400 {
-				mmc0 {
-					pinctrl_board_mmc0: mmc0-board {
-						atmel,pins =
-							<AT91_PIOA 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-				};
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-
-			rtc@fffffd20 {
-				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
-			};
-
-			rtc@fffffe00 {
-				status = "okay";
-			};
-		};
-	};
-
-	led-controller-1 {
-		compatible = "pwm-leds";
-
-		led-1 {
-			label = "ds1";
-			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-		};
-
-		led-2 {
-			label = "ds2";
-			pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-		};
-	};
-
-	led-controller-2 {
-		compatible = "gpio-leds";
-
-		led-3 {
-			label = "ds3";
-			gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-right-click {
-			label = "right_click";
-			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
-			linux,code = <273>;
-			wakeup-source;
-		};
-
-		button-left-click {
-			label = "left_click";
-			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
-			linux,code = <272>;
-			wakeup-source;
-		};
-	};
-
-	i2c-gpio-0 {
-		status = "okay";
-	};
-
-	i2c-gpio-1 {
-		status = "okay";
-	};
-};