ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 247 deletions

diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
deleted file mode 100644
index 93281c47c9ba..000000000000
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ /dev/null
@@ -1,247 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Broadcom BCM63138 DSL SoCs Device Tree
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "brcm,bcm63138", "brcm,bcmbca";
-	model = "Broadcom BCM963138 Reference Board";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		uart0 = &serial0;
-		uart1 = &serial1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0>;
-			enable-method = "brcm,bcm63138";
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <1>;
-			enable-method = "brcm,bcm63138";
-			resets = <&pmb0 4 1>;
-		};
-	};
-
-	clocks {
-		/* UBUS peripheral clock */
-		periph_clk: periph_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-			clock-output-names = "periph";
-		};
-
-		/* peripheral clock for system timer */
-		axi_clk: axi_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&armpll>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		/* APB bus clock */
-		apb_clk: apb_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&armpll>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-
-		hsspi_pll: hsspi-pll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <400000000>;
-		};
-	};
-
-	/* ARM bus */
-	axi@80000000 {
-		compatible = "simple-bus";
-		ranges = <0 0x80000000 0x784000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		L2: cache-controller@1d000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x1d000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-			cache-size = <524288>;
-			cache-sets = <1024>;
-			cache-line-size = <32>;
-			interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		scu: scu@1e000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0x1e000 0x100>;
-		};
-
-		gic: interrupt-controller@1f000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0x1f000 0x1000
-				0x1e100 0x100>;
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-		};
-
-		global_timer: timer@1e200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x1e200 0x20>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&axi_clk>;
-		};
-
-		local_timer: local-timer@1e600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x1e600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&axi_clk>;
-		};
-
-		twd_watchdog: watchdog@1e620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0x1e620 0x20>;
-			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		armpll: armpll@20000 {
-			#clock-cells = <0>;
-			compatible = "brcm,bcm63138-armpll";
-			clocks = <&periph_clk>;
-			reg = <0x20000 0xf00>;
-		};
-
-		pmb0: reset-controller@4800c0 {
-			compatible = "brcm,bcm63138-pmb";
-			reg = <0x4800c0 0x10>;
-			#reset-cells = <2>;
-		};
-
-		pmb1: reset-controller@4800e0 {
-			compatible = "brcm,bcm63138-pmb";
-			reg = <0x4800e0 0x10>;
-			#reset-cells = <2>;
-		};
-
-		ahci: sata@a000 {
-			compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci";
-			reg-names = "ahci", "top-ctrl";
-			reg = <0xa000 0x9ac>, <0x8040 0x24>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&pmb0 3 1>;
-			reset-names = "ahci";
-			status = "disabled";
-
-			sata0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata_phy0>;
-			};
-		};
-
-		sata_phy: sata-phy@8100 {
-			compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3";
-			reg = <0x8100 0x1e00>;
-			reg-names = "phy";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata_phy0: sata-phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-			};
-		};
-	};
-
-	/* Legacy UBUS base */
-	ubus@fffe8000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xfffe8000 0x8100>;
-
-		timer: timer@80 {
-			compatible = "brcm,bcm6328-timer", "syscon";
-			reg = <0x80 0x3c>;
-		};
-
-		serial0: serial@600 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x600 0x1b>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&periph_clk>;
-			clock-names = "periph";
-			status = "disabled";
-		};
-
-		serial1: serial@620 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x620 0x1b>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&periph_clk>;
-			clock-names = "periph";
-			status = "disabled";
-		};
-
-		hsspi: spi@1000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0";
-			reg = <0x1000 0x600>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&hsspi_pll &hsspi_pll>;
-			clock-names = "hsspi", "pll";
-			num-cs = <8>;
-			status = "disabled";
-		};
-
-		nand_controller: nand-controller@2000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
-			reg = <0x2000 0x600>, <0xf0 0x10>;
-			reg-names = "nand", "nand-int-base";
-			status = "disabled";
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "nand";
-		};
-
-		bootlut: bootlut@8000 {
-			compatible = "brcm,bcm63138-bootlut";
-			reg = <0x8000 0x50>;
-		};
-
-		reboot {
-			compatible = "syscon-reboot";
-			regmap = <&timer>;
-			offset = <0x34>;
-			mask = <1>;
-		};
-	};
-};