ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 644 deletions

diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
deleted file mode 100644
index 2de877d4ccc5..000000000000
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ /dev/null
@@ -1,644 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos3250 based Monk board device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Monk board which is based on
- * Samsung Exynos3250 SoC.
- */
-
-/dts-v1/;
-#include "exynos3250.dtsi"
-#include "exynos4412-ppmu-common.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/samsung,s2mps11.h>
-
-/ {
-	model = "Samsung Monk board";
-	compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3";
-
-	aliases {
-		i2c7 = &i2c_max77836;
-		mmc0 = &mshc_0;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x1ff00000>;
-	};
-
-	firmware@205f000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0205f000 0x1000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power-key {
-			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			label = "power key";
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	vemmc_reg: voltage-regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "V_EMMC_2.8V-fixed";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	i2c_max77836: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		max77836: pmic@25 {
-			compatible = "maxim,max77836";
-			interrupt-parent = <&gpx1>;
-			interrupts = <5 IRQ_TYPE_NONE>;
-			reg = <0x25>;
-			wakeup-source;
-
-			extcon {
-				compatible = "maxim,max77836-muic";
-			};
-
-			regulators {
-				compatible = "maxim,max77836-regulator";
-				safeout_reg: SAFEOUT {
-					regulator-name = "SAFEOUT";
-				};
-
-				charger_reg: CHARGER {
-					regulator-name = "CHARGER";
-					regulator-min-microamp = <45000>;
-					regulator-max-microamp = <475000>;
-					regulator-boot-on;
-				};
-
-				motor_reg: LDO1 {
-					regulator-name = "MOT_2.7V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <2700000>;
-				};
-
-				LDO2 {
-					regulator-name = "UNUSED_LDO2";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <3950000>;
-				};
-			};
-
-			charger {
-				compatible = "maxim,max77836-charger";
-
-				maxim,constant-uvolt = <4350000>;
-				maxim,fast-charge-uamp = <225000>;
-				maxim,eoc-uamp = <7500>;
-				maxim,ovp-uvolt = <6500000>;
-			};
-		};
-	};
-
-	haptics {
-		compatible = "regulator-haptic";
-		haptic-supply = <&motor_reg>;
-		min-microvolt = <1100000>;
-		max-microvolt = <2700000>;
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			cooling-maps {
-				map0 {
-					/* Correspond to 500MHz at freq_table */
-					cooling-device = <&cpu0 5 5>,
-							 <&cpu1 5 5>;
-				};
-				map1 {
-					/* Correspond to 200MHz at freq_table */
-					cooling-device = <&cpu0 8 8>,
-							 <&cpu1 8 8>;
-				};
-			};
-		};
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo3_reg>;
-	status = "okay";
-	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
-	assigned-clock-rates = <6000000>;
-
-	thermistor-ap {
-		compatible = "murata,ncp15wb473";
-		pullup-uv = <1800000>;
-		pullup-ohm = <100000>;
-		pulldown-ohm = <100000>;
-		io-channels = <&adc 0>;
-	};
-
-	thermistor-battery {
-		compatible = "murata,ncp15wb473";
-		pullup-uv = <1800000>;
-		pullup-ohm = <100000>;
-		pulldown-ohm = <100000>;
-		io-channels = <&adc 1>;
-	};
-};
-
-&bus_dmc {
-	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
-	vdd-supply = <&buck1_reg>;
-	status = "okay";
-};
-
-&cmu {
-	clocks = <&xusbxti>;
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&exynos_usbphy {
-	vbus-supply = <&safeout_reg>;
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&buck3_reg>;
-	status = "okay";
-};
-
-&hsotg {
-	vusb_d-supply = <&ldo15_reg>;
-	vusb_a-supply = <&ldo12_reg>;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&i2c_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	status = "okay";
-
-	pmic@66 {
-		compatible = "samsung,s2mps14-pmic";
-		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		reg = <0x66>;
-		wakeup-source;
-
-		s2mps14_osc: clocks {
-			compatible = "samsung,s2mps14-clk";
-			#clock-cells = <1>;
-			clock-output-names = "s2mps14_ap", "unused",
-				"s2mps14_bt";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VAP_ALIVE_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VAP_M1_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VCC_AP_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VAP_AVDD_PLL1";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "VAP_PLL_ISO_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "VAP_MIPI_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VAP_AVDD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "VAP_USB_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "V_LPDDR_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "UNUSED_LDO10";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "V_EMMC_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "V_EMMC_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "VSENSOR_2.85V";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				regulator-always-on;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "UNUSED_LDO14";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "TSP_AVDD_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "LCD_VDD_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "UNUSED_LDO17";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "UNUSED_LDO18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "TSP_VDD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "LCD_VDD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "UNUSED_LDO21";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo22_reg: LDO22 {
-				regulator-name = "UNUSED_LDO22";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "UNUSED_LDO23";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "UNUSED_LDO24";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "UNUSED_LDO25";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VAP_MIF_1.0V";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <900000>;
-				regulator-always-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "VAP_ARM_1.0V";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-always-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "VAP_INT3D_1.0V";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "VCC_SUB_1.95V";
-				regulator-min-microvolt = <1950000>;
-				regulator-max-microvolt = <1950000>;
-				regulator-always-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VCC_SUB_1.35V";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c_1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-	status = "okay";
-
-	fuelgauge@36 {
-		compatible = "maxim,max77836-battery";
-		interrupt-parent = <&gpx1>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		reg = <0x36>;
-	};
-};
-
-&i2s2 {
-	status = "okay";
-};
-
-&mshc_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	broken-cd;
-	non-removable;
-	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
-	card-detect-delay = <200>;
-	vmmc-supply = <&vemmc_reg>;
-	clock-frequency = <100000000>;
-	max-frequency = <100000000>;
-	mmc-ddr-1_8v;
-	samsung,dw-mshc-ciu-div = <1>;
-	samsung,dw-mshc-sdr-timing = <0 1>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&serial_0 {
-	assigned-clocks = <&cmu CLK_SCLK_UART0>;
-	assigned-clock-rates = <100000000>;
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&tmu {
-	vtmu-supply = <&ldo7_reg>;
-	status = "okay";
-};
-
-&rtc {
-	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-	status = "okay";
-};
-
-&xusbxti {
-	clock-frequency = <24000000>;
-};
-
-&pinctrl_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep0>;
-
-	sleep0: sleep-state {
-		PIN_SLP(gpa0-0, INPUT, DOWN);
-		PIN_SLP(gpa0-1, INPUT, DOWN);
-		PIN_SLP(gpa0-2, INPUT, DOWN);
-		PIN_SLP(gpa0-3, INPUT, DOWN);
-		PIN_SLP(gpa0-4, INPUT, DOWN);
-		PIN_SLP(gpa0-5, INPUT, DOWN);
-		PIN_SLP(gpa0-6, INPUT, DOWN);
-		PIN_SLP(gpa0-7, INPUT, DOWN);
-
-		PIN_SLP(gpa1-0, INPUT, DOWN);
-		PIN_SLP(gpa1-1, INPUT, DOWN);
-		PIN_SLP(gpa1-2, INPUT, DOWN);
-		PIN_SLP(gpa1-3, INPUT, DOWN);
-		PIN_SLP(gpa1-4, INPUT, DOWN);
-		PIN_SLP(gpa1-5, INPUT, DOWN);
-
-		PIN_SLP(gpb-0, PREV, NONE);
-		PIN_SLP(gpb-1, PREV, NONE);
-		PIN_SLP(gpb-2, PREV, NONE);
-		PIN_SLP(gpb-3, PREV, NONE);
-		PIN_SLP(gpb-4, INPUT, DOWN);
-		PIN_SLP(gpb-5, INPUT, DOWN);
-		PIN_SLP(gpb-6, INPUT, DOWN);
-		PIN_SLP(gpb-7, INPUT, DOWN);
-
-		PIN_SLP(gpc0-0, INPUT, DOWN);
-		PIN_SLP(gpc0-1, INPUT, DOWN);
-		PIN_SLP(gpc0-2, INPUT, DOWN);
-		PIN_SLP(gpc0-3, INPUT, DOWN);
-		PIN_SLP(gpc0-4, INPUT, DOWN);
-
-		PIN_SLP(gpc1-0, INPUT, DOWN);
-		PIN_SLP(gpc1-1, INPUT, DOWN);
-		PIN_SLP(gpc1-2, INPUT, DOWN);
-		PIN_SLP(gpc1-3, INPUT, DOWN);
-		PIN_SLP(gpc1-4, INPUT, DOWN);
-
-		PIN_SLP(gpd0-0, INPUT, DOWN);
-		PIN_SLP(gpd0-1, INPUT, DOWN);
-		PIN_SLP(gpd0-2, INPUT, NONE);
-		PIN_SLP(gpd0-3, INPUT, NONE);
-
-		PIN_SLP(gpd1-0, INPUT, NONE);
-		PIN_SLP(gpd1-1, INPUT, NONE);
-		PIN_SLP(gpd1-2, INPUT, NONE);
-		PIN_SLP(gpd1-3, INPUT, NONE);
-	};
-};
-
-&pinctrl_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&initial1 &sleep1>;
-
-	initial1: initial-state {
-		PIN_IN(gpk2-0, DOWN, LV1);
-		PIN_IN(gpk2-1, DOWN, LV1);
-		PIN_IN(gpk2-2, DOWN, LV1);
-		PIN_IN(gpk2-3, DOWN, LV1);
-		PIN_IN(gpk2-4, DOWN, LV1);
-		PIN_IN(gpk2-5, DOWN, LV1);
-		PIN_IN(gpk2-6, DOWN, LV1);
-	};
-
-	sleep1: sleep-state {
-		PIN_SLP(gpe0-0, PREV, NONE);
-		PIN_SLP(gpe0-1, PREV, NONE);
-		PIN_SLP(gpe0-2, INPUT, DOWN);
-		PIN_SLP(gpe0-3, INPUT, DOWN);
-		PIN_SLP(gpe0-4, PREV, NONE);
-		PIN_SLP(gpe0-5, INPUT, DOWN);
-		PIN_SLP(gpe0-6, INPUT, DOWN);
-		PIN_SLP(gpe0-7, INPUT, DOWN);
-
-		PIN_SLP(gpe1-0, INPUT, DOWN);
-		PIN_SLP(gpe1-1, PREV, NONE);
-		PIN_SLP(gpe1-2, INPUT, DOWN);
-		PIN_SLP(gpe1-3, INPUT, DOWN);
-		PIN_SLP(gpe1-4, INPUT, DOWN);
-		PIN_SLP(gpe1-5, INPUT, DOWN);
-		PIN_SLP(gpe1-6, INPUT, DOWN);
-		PIN_SLP(gpe1-7, INPUT, NONE);
-
-		PIN_SLP(gpe2-0, INPUT, NONE);
-		PIN_SLP(gpe2-1, INPUT, NONE);
-		PIN_SLP(gpe2-2, INPUT, NONE);
-
-		PIN_SLP(gpk0-0, INPUT, DOWN);
-		PIN_SLP(gpk0-1, INPUT, DOWN);
-		PIN_SLP(gpk0-2, OUT0, NONE);
-		PIN_SLP(gpk0-3, INPUT, DOWN);
-		PIN_SLP(gpk0-4, INPUT, DOWN);
-		PIN_SLP(gpk0-5, INPUT, DOWN);
-		PIN_SLP(gpk0-6, INPUT, DOWN);
-		PIN_SLP(gpk0-7, INPUT, DOWN);
-
-		PIN_SLP(gpk1-0, PREV, NONE);
-		PIN_SLP(gpk1-1, PREV, NONE);
-		PIN_SLP(gpk1-2, INPUT, DOWN);
-		PIN_SLP(gpk1-3, PREV, NONE);
-		PIN_SLP(gpk1-4, PREV, NONE);
-		PIN_SLP(gpk1-5, PREV, NONE);
-		PIN_SLP(gpk1-6, PREV, NONE);
-
-		PIN_SLP(gpk2-0, INPUT, DOWN);
-		PIN_SLP(gpk2-1, INPUT, DOWN);
-		PIN_SLP(gpk2-2, INPUT, DOWN);
-		PIN_SLP(gpk2-3, INPUT, DOWN);
-		PIN_SLP(gpk2-4, INPUT, DOWN);
-		PIN_SLP(gpk2-5, INPUT, DOWN);
-		PIN_SLP(gpk2-6, INPUT, DOWN);
-
-		PIN_SLP(gpl0-0, INPUT, DOWN);
-		PIN_SLP(gpl0-1, INPUT, DOWN);
-		PIN_SLP(gpl0-2, INPUT, DOWN);
-		PIN_SLP(gpl0-3, INPUT, DOWN);
-
-		PIN_SLP(gpm0-0, INPUT, DOWN);
-		PIN_SLP(gpm0-1, INPUT, DOWN);
-		PIN_SLP(gpm0-2, INPUT, DOWN);
-		PIN_SLP(gpm0-3, INPUT, DOWN);
-		PIN_SLP(gpm0-4, INPUT, DOWN);
-		PIN_SLP(gpm0-5, INPUT, DOWN);
-		PIN_SLP(gpm0-6, INPUT, DOWN);
-		PIN_SLP(gpm0-7, INPUT, DOWN);
-
-		PIN_SLP(gpm1-0, INPUT, DOWN);
-		PIN_SLP(gpm1-1, INPUT, DOWN);
-		PIN_SLP(gpm1-2, INPUT, DOWN);
-		PIN_SLP(gpm1-3, INPUT, DOWN);
-		PIN_SLP(gpm1-4, INPUT, DOWN);
-		PIN_SLP(gpm1-5, INPUT, DOWN);
-		PIN_SLP(gpm1-6, INPUT, DOWN);
-
-		PIN_SLP(gpm2-0, INPUT, DOWN);
-		PIN_SLP(gpm2-1, INPUT, DOWN);
-		PIN_SLP(gpm2-2, INPUT, DOWN);
-		PIN_SLP(gpm2-3, INPUT, DOWN);
-		PIN_SLP(gpm2-4, INPUT, DOWN);
-
-		PIN_SLP(gpm3-0, INPUT, DOWN);
-		PIN_SLP(gpm3-1, INPUT, DOWN);
-		PIN_SLP(gpm3-2, INPUT, DOWN);
-		PIN_SLP(gpm3-3, INPUT, DOWN);
-		PIN_SLP(gpm3-4, INPUT, DOWN);
-		PIN_SLP(gpm3-5, INPUT, DOWN);
-		PIN_SLP(gpm3-6, INPUT, DOWN);
-		PIN_SLP(gpm3-7, INPUT, DOWN);
-
-		PIN_SLP(gpm4-0, INPUT, DOWN);
-		PIN_SLP(gpm4-1, INPUT, DOWN);
-		PIN_SLP(gpm4-2, INPUT, DOWN);
-		PIN_SLP(gpm4-3, INPUT, DOWN);
-		PIN_SLP(gpm4-4, INPUT, DOWN);
-		PIN_SLP(gpm4-5, INPUT, DOWN);
-		PIN_SLP(gpm4-6, INPUT, DOWN);
-		PIN_SLP(gpm4-7, INPUT, DOWN);
-	};
-};