Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "We get a moderate number of new machines this time, and only one new
  SoC variant (Actions S700):

  Actions:
   - S700 Soc and CubieBoard7 development board
   - Allo.com Sparky Single-board-computer

  Allwinner:
   - Orange Pi R1 development board
   - Libre Computer Board ALL-H3-CC H3 single-board computer

  ASpeed ast2x00:
   - Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
   - Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
   - Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400

  AT91:
   - Axentia Nattis/Natte digital signage
   - sama5d2 PTC-ek Evaluation board

  Freescale/NXP i.MX:
   - SolidRun Humminboard2 development board
   - Variscite DART-MX6 SoM and Carrier-board
   - Technologic TS-4600 and TS-7970 development board
   - Toradex Colibri iMX7D SoM board
   - v1.5 variant of Solidrun Cubox-i and Hummingboard

  Freescale/NXP Layerscape:
   - Moxa UC-8410A Series industrial computer

  Gemini:
   - D-Link DNS-313 NAS enclosure

  OMAP:
   - LogicPD OMAP35xx SOM-LV devkit
   - LogicPD OMAP35xx Torpedo devkit

  Renesas:
   - r8a77970 (V3M) Starter Kit board
   - r8a7795 (M3-W) Salvator-XS board

  We finally managed to get the dtc warnings under control, with no more
  build-time warnings for bad device tree files. This includes fixes for
  the majority of platforms, including nomadik, samsung, lpc32xx, STi,
  spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood,
  renesas, hisilicon, and broadcom.

  Files get rearranged on a few platforms, in particular the Marvell
  Armada 7K/8K device tree files are changed in preparation for future
  SoC support, based on more than two of the same chips in one package,
  and some boards get renamed for oxnas for consistency.

  Finally, many existing SoCs gain descriptions for additional on-chip
  devices that we can now support with kernel drivers:

   - Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG)
   - Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi)
   - Aspeed clk controller support
   - Freescale LS1088A, LS1021A device support
   - Gemini Ethernet, PCI, TVE, panel
   - Keystone gpio, qspi, more uarts
   - Mediatek cpufreq, regulator, clock, reset
   - Marvell thermal, cpufreq, nand
   - Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu
   - Rockchip Mipi, GPU, display
   - Samsung Exynos5433 PMU, power domain, nfc
   - Spreadtrum: sc9860 clocks
   - Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..."

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits)
  arm64: dts: stratix10: fix SPI settings
  ARM: dts: socfpga: add i2c reset signals
  arm64: dts: stratix10: add USB ECC reset bit
  arm64: dts: stratix10: enable USB on the devkit
  ARM: dts: socfpga: disable over-current for Arria10 USB devkit
  ARM: dts: Nokia N9: add support for up/down keys in the dts
  ARM: dts: nomadik: add interrupt-parent for clcd
  ARM: dts: Add ethernet to a bunch of platforms
  ARM: dts: Add ethernet to the Gemini SoC
  ARM: dts: rename oxnas dts files
  ARM: dts: s5pv210: add interrupt-parent for ohci
  ARM: lpc3250: fix uda1380 gpio numbers
  ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property
  ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones
  ARM: dts: n900: Add aliases for lcd and tvout displays
  ARM: dts: Update ti-sysc data for existing users
  ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance
  arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string
  arm: spear13xx: Fix spics gpio controller's warning
  arm: spear13xx: Fix dmas cells
  ...

1 files changed, 51 insertions, 25 deletions

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 8aa2cc7aa125..2f3cb2a97f71 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * SAMSUNG EXYNOS5420 SoC device tree source
  *
@@ -7,10 +8,6 @@
  * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file.
  * EXYNOS5420 based board files can include this file and provide
  * values for board specfic bindings.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include "exynos54xx.dtsi"
@@ -188,6 +185,7 @@
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
 				 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
 			clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
+			power-domains = <&mau_pd>;
 		};
 
 		mfc: codec@11000000 {
@@ -237,37 +235,37 @@
 			status = "disabled";
 		};
 
-		nocp_mem0_0: nocp@10CA1000 {
+		nocp_mem0_0: nocp@10ca1000 {
 			compatible = "samsung,exynos5420-nocp";
 			reg = <0x10CA1000 0x200>;
 			status = "disabled";
 		};
 
-		nocp_mem0_1: nocp@10CA1400 {
+		nocp_mem0_1: nocp@10ca1400 {
 			compatible = "samsung,exynos5420-nocp";
 			reg = <0x10CA1400 0x200>;
 			status = "disabled";
 		};
 
-		nocp_mem1_0: nocp@10CA1800 {
+		nocp_mem1_0: nocp@10ca1800 {
 			compatible = "samsung,exynos5420-nocp";
 			reg = <0x10CA1800 0x200>;
 			status = "disabled";
 		};
 
-		nocp_mem1_1: nocp@10CA1C00 {
+		nocp_mem1_1: nocp@10ca1c00 {
 			compatible = "samsung,exynos5420-nocp";
 			reg = <0x10CA1C00 0x200>;
 			status = "disabled";
 		};
 
-		nocp_g3d_0: nocp@11A51000 {
+		nocp_g3d_0: nocp@11a51000 {
 			compatible = "samsung,exynos5420-nocp";
 			reg = <0x11A51000 0x200>;
 			status = "disabled";
 		};
 
-		nocp_g3d_1: nocp@11A51400 {
+		nocp_g3d_1: nocp@11a51400 {
 			compatible = "samsung,exynos5420-nocp";
 			reg = <0x11A51400 0x200>;
 			status = "disabled";
@@ -309,7 +307,7 @@
 			label = "MSC";
 		};
 
-		disp_pd: power-domain@100440C0 {
+		disp_pd: power-domain@100440c0 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x100440C0 0x20>;
 			#power-domain-cells = <0>;
@@ -322,6 +320,13 @@
 			clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1";
 		};
 
+		mau_pd: power-domain@100440e0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100440E0 0x20>;
+			#power-domain-cells = <0>;
+			label = "MAU";
+		};
+
 		pinctrl_0: pinctrl@13400000 {
 			compatible = "samsung,exynos5420-pinctrl";
 			reg = <0x13400000 0x1000>;
@@ -356,6 +361,7 @@
 			compatible = "samsung,exynos5420-pinctrl";
 			reg = <0x03860000 0x1000>;
 			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&mau_pd>;
 		};
 
 		amba {
@@ -374,9 +380,10 @@
 				#dma-cells = <1>;
 				#dma-channels = <6>;
 				#dma-requests = <16>;
+				power-domains = <&mau_pd>;
 			};
 
-			pdma0: pdma@121A0000 {
+			pdma0: pdma@121a0000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x121A0000 0x1000>;
 				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
@@ -387,7 +394,7 @@
 				#dma-requests = <32>;
 			};
 
-			pdma1: pdma@121B0000 {
+			pdma1: pdma@121b0000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x121B0000 0x1000>;
 				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
@@ -409,7 +416,7 @@
 				#dma-requests = <1>;
 			};
 
-			mdma1: mdma@11C10000 {
+			mdma1: mdma@11c10000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x11C10000 0x1000>;
 				interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
@@ -446,10 +453,11 @@
 			samsung,idma-addr = <0x03000000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2s0_bus>;
+			power-domains = <&mau_pd>;
 			status = "disabled";
 		};
 
-		i2s1: i2s@12D60000 {
+		i2s1: i2s@12d60000 {
 			compatible = "samsung,exynos5420-i2s";
 			reg = <0x12D60000 0x100>;
 			dmas = <&pdma1 12
@@ -465,7 +473,7 @@
 			status = "disabled";
 		};
 
-		i2s2: i2s@12D70000 {
+		i2s2: i2s@12d70000 {
 			compatible = "samsung,exynos5420-i2s";
 			reg = <0x12D70000 0x100>;
 			dmas = <&pdma0 12
@@ -554,7 +562,7 @@
 			status = "disabled";
 		};
 
-		adc: adc@12D10000 {
+		adc: adc@12d10000 {
 			compatible = "samsung,exynos-adc-v2";
 			reg = <0x12D10000 0x100>;
 			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
@@ -566,7 +574,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_8: i2c@12E00000 {
+		hsi2c_8: i2c@12e00000 {
 			compatible = "samsung,exynos5250-hsi2c";
 			reg = <0x12E00000 0x1000>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
@@ -579,7 +587,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_9: i2c@12E10000 {
+		hsi2c_9: i2c@12e10000 {
 			compatible = "samsung,exynos5250-hsi2c";
 			reg = <0x12E10000 0x1000>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
@@ -592,7 +600,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_10: i2c@12E20000 {
+		hsi2c_10: i2c@12e20000 {
 			compatible = "samsung,exynos5250-hsi2c";
 			reg = <0x12E20000 0x1000>;
 			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
@@ -618,13 +626,14 @@
 			samsung,syscon-phandle = <&pmu_system_controller>;
 			status = "disabled";
 			power-domains = <&disp_pd>;
+			#sound-dai-cells = <0>;
 		};
 
-		hdmiphy: hdmiphy@145D0000 {
+		hdmiphy: hdmiphy@145d0000 {
 			reg = <0x145D0000 0x20>;
 		};
 
-		hdmicec: cec@101B0000 {
+		hdmicec: cec@101b0000 {
 			compatible = "samsung,s5p-cec";
 			reg = <0x101B0000 0x200>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -649,7 +658,7 @@
 			status = "disabled";
 		};
 
-		rotator: rotator@11C00000 {
+		rotator: rotator@11c00000 {
 			compatible = "samsung,exynos5250-rotator";
 			reg = <0x11C00000 0x64>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -678,7 +687,7 @@
 			iommus = <&sysmmu_gscl1>;
 		};
 
-		jpeg_0: jpeg@11F50000 {
+		jpeg_0: jpeg@11f50000 {
 			compatible = "samsung,exynos5420-jpeg";
 			reg = <0x11F50000 0x1000>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
@@ -687,7 +696,7 @@
 			iommus = <&sysmmu_jpeg0>;
 		};
 
-		jpeg_1: jpeg@11F60000 {
+		jpeg_1: jpeg@11f60000 {
 			compatible = "samsung,exynos5420-jpeg";
 			reg = <0x11F60000 0x1000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
@@ -1349,6 +1358,13 @@
 	iommu-names = "m0", "m1";
 };
 
+&g2d {
+	iommus = <&sysmmu_g2dr>, <&sysmmu_g2dw>;
+	clocks = <&clock CLK_G2D>;
+	clock-names = "fimg2d";
+	status = "okay";
+};
+
 &i2c_0 {
 	clocks = <&clock CLK_I2C0>;
 	clock-names = "i2c";
@@ -1410,6 +1426,11 @@
 	clock-names = "fin_pll", "mct";
 };
 
+&prng {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
 &pwm {
 	clocks = <&clock CLK_PWM>;
 	clock-names = "timers";
@@ -1455,6 +1476,11 @@
 	clock-names = "secss";
 };
 
+&trng {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
 &usbdrd3_0 {
 	clocks = <&clock CLK_USBD300>;
 	clock-names = "usbdrd30";