ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 174 deletions

diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
deleted file mode 100644
index c7207ea437c4..000000000000
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx25-eukrea-cpuimx25.dtsi"
-
-/ {
-	model = "Eukrea MBIMXSD25";
-	compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-
-		button {
-			label = "BP1";
-			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpioled>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "eukrea,asoc-tlv320";
-		eukrea,model = "imx25-eukrea-tlv320aic23";
-		ssi-controller = <&ssi1>;
-		fsl,mux-int-port = <1>;
-		fsl,mux-ext-port = <5>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c1 {
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&iomuxc {
-	imx25-eukrea-mbimxsd25-baseboard {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX25_PAD_KPP_COL3__AUD5_TXFS		0xe0
-				MX25_PAD_KPP_COL2__AUD5_TXC		0xe0
-				MX25_PAD_KPP_COL1__AUD5_RXD		0xe0
-				MX25_PAD_KPP_COL0__AUD5_TXD		0xe0
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX25_PAD_SD1_CMD__ESDHC1_CMD		0x400000c0
-				MX25_PAD_SD1_CLK__ESDHC1_CLK		0x400000c0
-				MX25_PAD_SD1_DATA0__ESDHC1_DAT0		0x400000c0
-				MX25_PAD_SD1_DATA1__ESDHC1_DAT1		0x400000c0
-				MX25_PAD_SD1_DATA2__ESDHC1_DAT2		0x400000c0
-				MX25_PAD_SD1_DATA3__ESDHC1_DAT3		0x400000c0
-			>;
-		};
-
-		pinctrl_gpiokeys: gpiokeysgrp {
-			fsl,pins = <MX25_PAD_VSTBY_ACK__GPIO_3_18 0x80000000>;
-		};
-
-		pinctrl_gpioled: gpioledgrp {
-			fsl,pins = <MX25_PAD_POWER_FAIL__GPIO_3_19 0x80000000>;
-		};
-
-		pinctrl_lcdc: lcdcgrp {
-			fsl,pins = <
-				MX25_PAD_LD0__LD0			0x1
-				MX25_PAD_LD1__LD1			0x1
-				MX25_PAD_LD2__LD2			0x1
-				MX25_PAD_LD3__LD3			0x1
-				MX25_PAD_LD4__LD4			0x1
-				MX25_PAD_LD5__LD5			0x1
-				MX25_PAD_LD6__LD6			0x1
-				MX25_PAD_LD7__LD7			0x1
-				MX25_PAD_LD8__LD8			0x1
-				MX25_PAD_LD9__LD9			0x1
-				MX25_PAD_LD10__LD10			0x1
-				MX25_PAD_LD11__LD11			0x1
-				MX25_PAD_LD12__LD12			0x1
-				MX25_PAD_LD13__LD13			0x1
-				MX25_PAD_LD14__LD14			0x1
-				MX25_PAD_LD15__LD15			0x1
-				MX25_PAD_GPIO_E__LD16			0x1
-				MX25_PAD_GPIO_F__LD17			0x1
-				MX25_PAD_HSYNC__HSYNC			0x80000000
-				MX25_PAD_VSYNC__VSYNC			0x80000000
-				MX25_PAD_LSCLK__LSCLK			0x80000000
-				MX25_PAD_OE_ACD__OE_ACD			0x80000000
-				MX25_PAD_CONTRAST__CONTRAST		0x80000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX25_PAD_UART1_RTS__UART1_RTS		0xe0
-				MX25_PAD_UART1_CTS__UART1_CTS		0xe0
-				MX25_PAD_UART1_TXD__UART1_TXD		0x80000000
-				MX25_PAD_UART1_RXD__UART1_RXD		0xc0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX25_PAD_UART2_RXD__UART2_RXD		0x80000000
-				MX25_PAD_UART2_TXD__UART2_TXD		0x80000000
-				MX25_PAD_UART2_RTS__UART2_RTS		0x80000000
-				MX25_PAD_UART2_CTS__UART2_CTS		0x80000000
-			>;
-		};
-	};
-};
-
-&ssi1 {
-	codec-handle = <&tlv320aic23>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbhost1 {
-	status = "okay";
-};
-
-&usbotg {
-	external-vbus-divider;
-	status = "okay";
-};