ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 284 deletions

diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
deleted file mode 100644
index 74110bbcd9d4..000000000000
--- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
+++ /dev/null
@@ -1,284 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX27";
-	compatible = "eukrea,cpuimx27", "fsl,imx27";
-
-	memory@a0000000 {
-		device_type = "memory";
-		reg = <0xa0000000 0x04000000>;
-	};
-
-	clk14745600: clk-uart {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <14745600>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&owire {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_owire>;
-	status = "okay";
-};
-
-&sdhci2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhc2>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh2>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	phy_type = "ulpi";
-	disable-over-current;
-	status = "okay";
-};
-
-&weim {
-	status = "okay";
-
-	nor: nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0 0x00000000 0x04000000>;
-		bank-width = <2>;
-		linux,mtd-name = "physmap-flash.0";
-		fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
-	};
-
-	uart8250@3,200000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart8250_1>;
-		compatible = "ns8250";
-		clocks = <&clk14745600>;
-		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
-		interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
-		reg = <3 0x200000 0x1000>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		no-loopback-test;
-	};
-
-	uart8250@3,400000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart8250_2>;
-		compatible = "ns8250";
-		clocks = <&clk14745600>;
-		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
-		interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
-		reg = <3 0x400000 0x1000>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		no-loopback-test;
-	};
-
-	uart8250@3,800000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart8250_3>;
-		compatible = "ns8250";
-		clocks = <&clk14745600>;
-		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
-		interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
-		reg = <3 0x800000 0x1000>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		no-loopback-test;
-	};
-
-	uart8250@3,1000000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart8250_4>;
-		compatible = "ns8250";
-		clocks = <&clk14745600>;
-		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
-		interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
-		reg = <3 0x1000000 0x1000>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		no-loopback-test;
-	};
-};
-
-&iomuxc {
-	imx27-eukrea-cpuimx27 {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0		0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1		0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2		0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3		0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER		0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1		0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2		0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3		0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO		0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC		0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS		0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK		0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0		0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV		0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK		0x0
-				MX27_PAD_ATA_DATA13__FEC_COL		0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER		0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN		0x0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX27_PAD_I2C_DATA__I2C_DATA		0x0
-				MX27_PAD_I2C_CLK__I2C_CLK		0x0
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX27_PAD_NFRB__NFRB			0x0
-				MX27_PAD_NFCLE__NFCLE			0x0
-				MX27_PAD_NFWP_B__NFWP_B			0x0
-				MX27_PAD_NFCE_B__NFCE_B			0x0
-				MX27_PAD_NFALE__NFALE			0x0
-				MX27_PAD_NFRE_B__NFRE_B			0x0
-				MX27_PAD_NFWE_B__NFWE_B			0x0
-			>;
-		};
-
-		pinctrl_owire: owiregrp {
-			fsl,pins = <
-				MX27_PAD_RTCK__OWIRE			0x0
-			>;
-		};
-
-		pinctrl_sdhc2: sdhc2grp {
-			fsl,pins = <
-				MX27_PAD_SD2_CLK__SD2_CLK		0x0
-				MX27_PAD_SD2_CMD__SD2_CMD		0x0
-				MX27_PAD_SD2_D0__SD2_D0			0x0
-				MX27_PAD_SD2_D1__SD2_D1			0x0
-				MX27_PAD_SD2_D2__SD2_D2			0x0
-				MX27_PAD_SD2_D3__SD2_D3			0x0
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX27_PAD_USBH1_TXDM__UART4_TXD		0x0
-				MX27_PAD_USBH1_RXDP__UART4_RXD		0x0
-				MX27_PAD_USBH1_TXDP__UART4_CTS		0x0
-				MX27_PAD_USBH1_FS__UART4_RTS		0x0
-			>;
-		};
-
-		pinctrl_uart8250_1: uart82501grp {
-			fsl,pins = <
-				MX27_PAD_USB_PWR__GPIO2_23		0x0
-			>;
-		};
-
-		pinctrl_uart8250_2: uart82502grp {
-			fsl,pins = <
-				MX27_PAD_USBH1_SUSP__GPIO2_22		0x0
-			>;
-		};
-
-		pinctrl_uart8250_3: uart82503grp {
-			fsl,pins = <
-				MX27_PAD_USBH1_OE_B__GPIO2_27		0x0
-			>;
-		};
-
-		pinctrl_uart8250_4: uart82504grp {
-			fsl,pins = <
-				MX27_PAD_USBH1_RXDM__GPIO2_30		0x0
-			>;
-		};
-
-		pinctrl_usbh2: usbh2grp {
-			fsl,pins = <
-				MX27_PAD_USBH2_CLK__USBH2_CLK		0x0
-				MX27_PAD_USBH2_DIR__USBH2_DIR		0x0
-				MX27_PAD_USBH2_NXT__USBH2_NXT		0x0
-				MX27_PAD_USBH2_STP__USBH2_STP		0x0
-				MX27_PAD_CSPI2_SCLK__USBH2_DATA0	0x0
-				MX27_PAD_CSPI2_MOSI__USBH2_DATA1	0x0
-				MX27_PAD_CSPI2_MISO__USBH2_DATA2	0x0
-				MX27_PAD_CSPI2_SS1__USBH2_DATA3		0x0
-				MX27_PAD_CSPI2_SS2__USBH2_DATA4		0x0
-				MX27_PAD_CSPI1_SS2__USBH2_DATA5		0x0
-				MX27_PAD_CSPI2_SS0__USBH2_DATA6		0x0
-				MX27_PAD_USBH2_DATA7__USBH2_DATA7	0x0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX27_PAD_USBOTG_CLK__USBOTG_CLK		0x0
-				MX27_PAD_USBOTG_DIR__USBOTG_DIR		0x0
-				MX27_PAD_USBOTG_NXT__USBOTG_NXT		0x0
-				MX27_PAD_USBOTG_STP__USBOTG_STP		0x0
-				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0	0x0
-				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1	0x0
-				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2	0x0
-				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3	0x0
-				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4	0x0
-				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5	0x0
-				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6	0x0
-				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7	0x0
-			>;
-		};
-	};
-};