Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM/arm64 Devicetree updates from Olof Johansson:
 "As usual, device tree updates is the bulk of our material in this
  merge window. This time around, 559 patches affecting both 32- and
  64-bit platforms.

  Changes are too many to list individually, but some of the larger
  ones:

  New platform/SoC support:

   - Automotive:
     + Renesas R-Car D3 (R8A77995)
     + TI DT76x
     + MediaTek mt2712e
   - Communication-oriented:
     + Qualcomm IPQ8074
     + Broadcom Stingray
     + Marvell Armada 8080
   - Set top box:
     + Uniphier PXs3

  Besides some vendor reference boards for the SoC above, there are also
  several new boards/machines:

   - TI AM335x Moxa UC-8100-ME-T open platform
   - TI AM57xx Beaglebone X15 Rev C
   - Microchip/Atmel sama5d27 SoM1 EK
   - Broadcom Raspberry Pi Zero W
   - Gemini-based D-Link DIR-685 router
   - Freescale i.MX6:
     + Toradex Apalis module + Apalis and Ixora carrier boards
     + Engicam GEAM6UL Starter Kit
   - Freescale i.MX53-based Beckhoff CX9020 Embedded PC
   - Mediatek mt7623-based BananaPi R2
   - Several Allwinner-based single-board computers:
  + Cubietruck plus
  + Bananapi M3, M2M and M64
  + NanoPi A64
  + A64-OLinuXino
  + Pine64
   - Rockchip RK3328 Pine64/Rock64 board support
   - Rockchip RK3399 boards:
  + RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
  + Theobroma Systems RK3399-Q7 SoM
   - ZTE ZX296718 PCBOX Board"

* tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits)
  ARM: dts: at91: at91sam9g45: add AC97
  arm64: dts: marvell: mcbin: enable more networking ports
  arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
  arm64: dts: marvell: add TX interrupts for PPv2.2
  arm64: dts: uniphier: add PXs3 SoC support
  ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
  ARM: dts: uniphier: fix size of sdctrl nodes
  ARM: dts: uniphier: add AIDET nodes
  arm64: dts: uniphier: fix size of sdctrl node
  arm64: dts: uniphier: add AIDET nodes
  Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
  arm64: dts: uniphier: add reset controller node of analog amplifier
  arm64: dts: marvell: add Device Tree files for Armada-8KP
  arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
  arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
  dt-bindings: add rk3399-q7 SoM
  ARM: dts: rockchip: enable usb for rv1108-evb
  ARM: dts: rockchip: add usb nodes for rv1108 SoCs
  dt-bindings: update grf-binding for rv1108 SoCs
  ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
  ...

1 files changed, 58 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx6dl-gw53xx.dts b/arch/arm/boot/dts/imx6dl-gw53xx.dts
index 6844b708d2f8..9bfc620d37bd 100644
--- a/arch/arm/boot/dts/imx6dl-gw53xx.dts
+++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts
@@ -17,3 +17,61 @@
 	model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX";
 	compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
 };
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi1_mux: endpoint {
+				remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi1>;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi1: ipu1_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};