ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 367 deletions

diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
deleted file mode 100644
index f804ff95a6ad..000000000000
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ /dev/null
@@ -1,367 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2014 FEDEVEL, Inc.
- *
- * Author: Robert Nelson <robertcnelson@gmail.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usbh1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			pinctrl-names = "default";
-			regulator-name = "usbh1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			pinctrl-names = "default";
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led0: led-usr {
-			label = "usr";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6-rex-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6-rex-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pca9535: gpio-expander@27 {
-		compatible = "nxp,pca9535";
-		reg = <0x27>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pca9535>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	eeprom@57 {
-		compatible = "atmel,24c02";
-		reg = <0x57>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-rex {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SGTL5000 sys_mclk */
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x030b0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				/* CS */
-				MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x000b1
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
-				/* CS */
-				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-				/* Phy reset */
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				/* user led */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000
-			>;
-		};
-
-		pinctrl_pca9535: pca9535grp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x17059
-		   >;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x10b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x10b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				/* CD */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* WP */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1f0b0
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				/* CD */
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
-				/* WP */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1f0b0
-			>;
-		};
-	};
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};