Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Arnd Bergmann:
 "We add device tree files for a couple of additional SoCs in various
  areas:

  Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for
  networking, Amlogic A113D for audio, and Renesas R-Car V3M for
  automotive.

  As usual, lots of new boards get added based on those and other SoCs:

   - Actions S500 based CubieBoard6 single-board computer

   - Amlogic Meson-AXG A113D based development board
   - Amlogic S912 based Khadas VIM2 single-board computer
   - Amlogic S912 based Tronsmart Vega S96 set-top-box

   - Allwinner H5 based NanoPi NEO Plus2 single-board computer
   - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
   - Allwinner A83T based TBS A711 Tablet

   - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
   - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
     wireless access points and routers

   - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
   - NXP i.MX53 based GE Healthcare PPD biometric monitor
   - NXP i.MX6 based Pistachio single-board computer
   - NXP i.MX6 based Vining-2000 automotive diagnostic interface
   - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants

   - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
   - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet

   - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA

   - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
   - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
   - Renasas r8a7745 based iWave G22D-SODIMM SoM

   - Rockchip rk3288 based Amarula Vyasa single-board computer

   - Samsung Exynos5800 based Odroid HC1 single-board computer

  For existing SoC support, there was a lot of ongoing work, as usual
  most of that concentrated on the Renesas, Rockchip, OMAP, i.MX,
  Amlogic and Allwinner platforms, but others were also active.

  Rob Herring and many others worked on reducing the number of issues
  that the latest version of 'dtc' now warns about. Unfortunately there
  is still a lot left to do.

  A rework of the ARM foundation model introduced several new files for
  common variations of the model"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits)
  arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3
  dt-bindings: bus: Add documentation for the Technologic Systems NBUS
  arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock
  ARM: dts: owl-s500: Add CubieBoard6
  dt-bindings: arm: actions: Add CubieBoard6
  ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock
  ARM: dts: owl-s500: Set power domains for CPU2 and CPU3
  arm: dts: mt7623: remove unused compatible string for pio node
  arm: dts: mt7623: update usb related nodes
  arm: dts: mt7623: update crypto node
  ARM: dts: sun8i: a711: Enable USB OTG
  ARM: dts: sun8i: a711: Add regulator support
  ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1
  ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1
  ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file
  ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes
  ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes
  ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes
  ARM: dts: sunxi: Add dtsi for AXP81x PMIC
  arm64: dts: allwinner: H5: Restore EMAC changes
  ...

1 files changed, 105 insertions, 94 deletions

diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 6c7eb54be9e2..5b03ba3beda9 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -95,7 +95,7 @@
 		};
 	};
 
-	intc: interrupt-controller@00a01000 {
+	intc: interrupt-controller@a01000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -153,13 +153,13 @@
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		ocram: sram@00900000 {
+		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
 			clocks = <&clks IMX6SX_CLK_OCRAM>;
 		};
 
-		L2: l2-cache@00a02000 {
+		L2: l2-cache@a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -169,7 +169,7 @@
 			arm,data-latency = <4 2 3>;
 		};
 
-		gpu: gpu@01800000 {
+		gpu: gpu@1800000 {
 			compatible = "vivante,gc";
 			reg = <0x01800000 0x4000>;
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
@@ -179,7 +179,7 @@
 			clock-names = "bus", "core", "shader";
 		};
 
-		dma_apbh: dma-apbh@01804000 {
+		dma_apbh: dma-apbh@1804000 {
 			compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x01804000 0x2000>;
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -192,7 +192,7 @@
 			clocks = <&clks IMX6SX_CLK_APBH_DMA>;
 		};
 
-		gpmi: gpmi-nand@01806000{
+		gpmi: gpmi-nand@1806000{
 			compatible = "fsl,imx6sx-gpmi-nand";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -212,21 +212,21 @@
 			status = "disabled";
 		};
 
-		aips1: aips-bus@02000000 {
+		aips1: aips-bus@2000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x02000000 0x100000>;
 			ranges;
 
-			spba-bus@02000000 {
+			spba-bus@2000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x02000000 0x40000>;
 				ranges;
 
-				spdif: spdif@02004000 {
+				spdif: spdif@2004000 {
 					compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif";
 					reg = <0x02004000 0x4000>;
 					interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
@@ -248,7 +248,7 @@
 					status = "disabled";
 				};
 
-				ecspi1: ecspi@02008000 {
+				ecspi1: ecspi@2008000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -260,7 +260,7 @@
 					status = "disabled";
 				};
 
-				ecspi2: ecspi@0200c000 {
+				ecspi2: ecspi@200c000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -272,7 +272,7 @@
 					status = "disabled";
 				};
 
-				ecspi3: ecspi@02010000 {
+				ecspi3: ecspi@2010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -284,7 +284,7 @@
 					status = "disabled";
 				};
 
-				ecspi4: ecspi@02014000 {
+				ecspi4: ecspi@2014000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -296,7 +296,7 @@
 					status = "disabled";
 				};
 
-				uart1: serial@02020000 {
+				uart1: serial@2020000 {
 					compatible = "fsl,imx6sx-uart",
 						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
@@ -309,7 +309,7 @@
 					status = "disabled";
 				};
 
-				esai: esai@02024000 {
+				esai: esai@2024000 {
 					reg = <0x02024000 0x4000>;
 					interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
@@ -322,7 +322,7 @@
 					status = "disabled";
 				};
 
-				ssi1: ssi@02028000 {
+				ssi1: ssi@2028000 {
 					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
 					reg = <0x02028000 0x4000>;
@@ -336,7 +336,7 @@
 					status = "disabled";
 				};
 
-				ssi2: ssi@0202c000 {
+				ssi2: ssi@202c000 {
 					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
 					reg = <0x0202c000 0x4000>;
@@ -350,7 +350,7 @@
 					status = "disabled";
 				};
 
-				ssi3: ssi@02030000 {
+				ssi3: ssi@2030000 {
 					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
 					reg = <0x02030000 0x4000>;
@@ -364,7 +364,7 @@
 					status = "disabled";
 				};
 
-				asrc: asrc@02034000 {
+				asrc: asrc@2034000 {
 					reg = <0x02034000 0x4000>;
 					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
@@ -381,7 +381,7 @@
 				};
 			};
 
-			pwm1: pwm@02080000 {
+			pwm1: pwm@2080000 {
 				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 				reg = <0x02080000 0x4000>;
 				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -391,7 +391,7 @@
 				#pwm-cells = <2>;
 			};
 
-			pwm2: pwm@02084000 {
+			pwm2: pwm@2084000 {
 				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 				reg = <0x02084000 0x4000>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -401,7 +401,7 @@
 				#pwm-cells = <2>;
 			};
 
-			pwm3: pwm@02088000 {
+			pwm3: pwm@2088000 {
 				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 				reg = <0x02088000 0x4000>;
 				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -411,7 +411,7 @@
 				#pwm-cells = <2>;
 			};
 
-			pwm4: pwm@0208c000 {
+			pwm4: pwm@208c000 {
 				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 				reg = <0x0208c000 0x4000>;
 				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -421,7 +421,7 @@
 				#pwm-cells = <2>;
 			};
 
-			flexcan1: can@02090000 {
+			flexcan1: can@2090000 {
 				compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
 				reg = <0x02090000 0x4000>;
 				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -431,7 +431,7 @@
 				status = "disabled";
 			};
 
-			flexcan2: can@02094000 {
+			flexcan2: can@2094000 {
 				compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
 				reg = <0x02094000 0x4000>;
 				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
@@ -441,7 +441,7 @@
 				status = "disabled";
 			};
 
-			gpt: gpt@02098000 {
+			gpt: gpt@2098000 {
 				compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -450,7 +450,7 @@
 				clock-names = "ipg", "per";
 			};
 
-			gpio1: gpio@0209c000 {
+			gpio1: gpio@209c000 {
 				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 				reg = <0x0209c000 0x4000>;
 				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
@@ -462,7 +462,7 @@
 				gpio-ranges = <&iomuxc 0 5 26>;
 			};
 
-			gpio2: gpio@020a0000 {
+			gpio2: gpio@20a0000 {
 				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 				reg = <0x020a0000 0x4000>;
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
@@ -474,7 +474,7 @@
 				gpio-ranges = <&iomuxc 0 31 20>;
 			};
 
-			gpio3: gpio@020a4000 {
+			gpio3: gpio@20a4000 {
 				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 				reg = <0x020a4000 0x4000>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
@@ -486,7 +486,7 @@
 				gpio-ranges = <&iomuxc 0 51 29>;
 			};
 
-			gpio4: gpio@020a8000 {
+			gpio4: gpio@20a8000 {
 				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 				reg = <0x020a8000 0x4000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
@@ -498,7 +498,7 @@
 				gpio-ranges = <&iomuxc 0 80 32>;
 			};
 
-			gpio5: gpio@020ac000 {
+			gpio5: gpio@20ac000 {
 				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 				reg = <0x020ac000 0x4000>;
 				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
@@ -510,7 +510,7 @@
 				gpio-ranges = <&iomuxc 0 112 24>;
 			};
 
-			gpio6: gpio@020b0000 {
+			gpio6: gpio@20b0000 {
 				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 				reg = <0x020b0000 0x4000>;
 				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
@@ -522,7 +522,7 @@
 				gpio-ranges = <&iomuxc 0 136 12>, <&iomuxc 12 158 11>;
 			};
 
-			gpio7: gpio@020b4000 {
+			gpio7: gpio@20b4000 {
 				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 				reg = <0x020b4000 0x4000>;
 				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
@@ -534,7 +534,7 @@
 				gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>;
 			};
 
-			kpp: kpp@020b8000 {
+			kpp: kpp@20b8000 {
 				compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -542,14 +542,14 @@
 				status = "disabled";
 			};
 
-			wdog1: wdog@020bc000 {
+			wdog1: wdog@20bc000 {
 				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_DUMMY>;
 			};
 
-			wdog2: wdog@020c0000 {
+			wdog2: wdog@20c0000 {
 				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -557,7 +557,7 @@
 				status = "disabled";
 			};
 
-			clks: ccm@020c4000 {
+			clks: ccm@20c4000 {
 				compatible = "fsl,imx6sx-ccm";
 				reg = <0x020c4000 0x4000>;
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -567,7 +567,7 @@
 				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
 			};
 
-			anatop: anatop@020c8000 {
+			anatop: anatop@20c8000 {
 				compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
 					     "syscon", "simple-bus";
 				reg = <0x020c8000 0x1000>;
@@ -675,11 +675,12 @@
 				compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				fsl,tempmon = <&anatop>;
-				fsl,tempmon-data = <&ocotp>;
+				nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+				nvmem-cell-names = "calib", "temp_grade";
 				clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
 			};
 
-			usbphy1: usbphy@020c9000 {
+			usbphy1: usbphy@20c9000 {
 				compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020c9000 0x1000>;
 				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
@@ -687,7 +688,7 @@
 				fsl,anatop = <&anatop>;
 			};
 
-			usbphy2: usbphy@020ca000 {
+			usbphy2: usbphy@20ca000 {
 				compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020ca000 0x1000>;
 				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -695,7 +696,7 @@
 				fsl,anatop = <&anatop>;
 			};
 
-			snvs: snvs@020cc000 {
+			snvs: snvs@20cc000 {
 				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 				reg = <0x020cc000 0x4000>;
 
@@ -724,17 +725,17 @@
 				};
 			};
 
-			epit1: epit@020d0000 {
+			epit1: epit@20d0000 {
 				reg = <0x020d0000 0x4000>;
 				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			epit2: epit@020d4000 {
+			epit2: epit@20d4000 {
 				reg = <0x020d4000 0x4000>;
 				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			src: src@020d8000 {
+			src: src@20d8000 {
 				compatible = "fsl,imx6sx-src", "fsl,imx51-src";
 				reg = <0x020d8000 0x4000>;
 				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -742,7 +743,7 @@
 				#reset-cells = <1>;
 			};
 
-			gpc: gpc@020dc000 {
+			gpc: gpc@20dc000 {
 				compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
 				reg = <0x020dc000 0x4000>;
 				interrupt-controller;
@@ -751,18 +752,18 @@
 				interrupt-parent = <&intc>;
 			};
 
-			iomuxc: iomuxc@020e0000 {
+			iomuxc: iomuxc@20e0000 {
 				compatible = "fsl,imx6sx-iomuxc";
 				reg = <0x020e0000 0x4000>;
 			};
 
-			gpr: iomuxc-gpr@020e4000 {
+			gpr: iomuxc-gpr@20e4000 {
 				compatible = "fsl,imx6sx-iomuxc-gpr",
 					     "fsl,imx6q-iomuxc-gpr", "syscon";
 				reg = <0x020e4000 0x4000>;
 			};
 
-			sdma: sdma@020ec000 {
+			sdma: sdma@20ec000 {
 				compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -775,7 +776,7 @@
 			};
 		};
 
-		aips2: aips-bus@02100000 {
+		aips2: aips-bus@2100000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -809,7 +810,7 @@
 				};
 			};
 
-			usbotg1: usb@02184000 {
+			usbotg1: usb@2184000 {
 				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
 				reg = <0x02184000 0x200>;
 				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
@@ -823,7 +824,7 @@
 				status = "disabled";
 			};
 
-			usbotg2: usb@02184200 {
+			usbotg2: usb@2184200 {
 				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
 				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
@@ -836,7 +837,7 @@
 				status = "disabled";
 			};
 
-			usbh: usb@02184400 {
+			usbh: usb@2184400 {
 				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
 				reg = <0x02184400 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
@@ -851,14 +852,14 @@
 				status = "disabled";
 			};
 
-			usbmisc: usbmisc@02184800 {
+			usbmisc: usbmisc@2184800 {
 				#index-cells = <1>;
 				compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc";
 				reg = <0x02184800 0x200>;
 				clocks = <&clks IMX6SX_CLK_USBOH3>;
 			};
 
-			fec1: ethernet@02188000 {
+			fec1: ethernet@2188000 {
 				compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
 				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
@@ -875,7 +876,7 @@
 				status = "disabled";
 			};
 
-			mlb: mlb@0218c000 {
+			mlb: mlb@218c000 {
 				reg = <0x0218c000 0x4000>;
 				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
@@ -884,7 +885,7 @@
 				status = "disabled";
 			};
 
-			usdhc1: usdhc@02190000 {
+			usdhc1: usdhc@2190000 {
 				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -896,7 +897,7 @@
 				status = "disabled";
 			};
 
-			usdhc2: usdhc@02194000 {
+			usdhc2: usdhc@2194000 {
 				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -908,7 +909,7 @@
 				status = "disabled";
 			};
 
-			usdhc3: usdhc@02198000 {
+			usdhc3: usdhc@2198000 {
 				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -920,7 +921,7 @@
 				status = "disabled";
 			};
 
-			usdhc4: usdhc@0219c000 {
+			usdhc4: usdhc@219c000 {
 				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -932,7 +933,7 @@
 				status = "disabled";
 			};
 
-			i2c1: i2c@021a0000 {
+			i2c1: i2c@21a0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
@@ -942,7 +943,7 @@
 				status = "disabled";
 			};
 
-			i2c2: i2c@021a4000 {
+			i2c2: i2c@21a4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
@@ -952,7 +953,7 @@
 				status = "disabled";
 			};
 
-			i2c3: i2c@021a8000 {
+			i2c3: i2c@21a8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
@@ -962,12 +963,12 @@
 				status = "disabled";
 			};
 
-			mmdc: mmdc@021b0000 {
+			mmdc: mmdc@21b0000 {
 				compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
 				reg = <0x021b0000 0x4000>;
 			};
 
-			fec2: ethernet@021b4000 {
+			fec2: ethernet@21b4000 {
 				compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
 				reg = <0x021b4000 0x4000>;
 				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
@@ -982,7 +983,7 @@
 				status = "disabled";
 			};
 
-			weim: weim@021b8000 {
+			weim: weim@21b8000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
@@ -993,13 +994,23 @@
 				status = "disabled";
 			};
 
-			ocotp: ocotp@021bc000 {
+			ocotp: ocotp@21bc000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
 				compatible = "fsl,imx6sx-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
 				clocks = <&clks IMX6SX_CLK_OCOTP>;
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
 			};
 
-			sai1: sai@021d4000 {
+			sai1: sai@21d4000 {
 				compatible = "fsl,imx6sx-sai";
 				reg = <0x021d4000 0x4000>;
 				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -1012,13 +1023,13 @@
 				status = "disabled";
 			};
 
-			audmux: audmux@021d8000 {
+			audmux: audmux@21d8000 {
 				compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux";
 				reg = <0x021d8000 0x4000>;
 				status = "disabled";
 			};
 
-			sai2: sai@021dc000 {
+			sai2: sai@21dc000 {
 				compatible = "fsl,imx6sx-sai";
 				reg = <0x021dc000 0x4000>;
 				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -1031,7 +1042,7 @@
 				status = "disabled";
 			};
 
-			qspi1: qspi@021e0000 {
+			qspi1: qspi@21e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6sx-qspi";
@@ -1044,7 +1055,7 @@
 				status = "disabled";
 			};
 
-			qspi2: qspi@021e4000 {
+			qspi2: qspi@21e4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6sx-qspi";
@@ -1057,7 +1068,7 @@
 				status = "disabled";
 			};
 
-			uart2: serial@021e8000 {
+			uart2: serial@21e8000 {
 				compatible = "fsl,imx6sx-uart",
 					     "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021e8000 0x4000>;
@@ -1070,7 +1081,7 @@
 				status = "disabled";
 			};
 
-			uart3: serial@021ec000 {
+			uart3: serial@21ec000 {
 				compatible = "fsl,imx6sx-uart",
 					     "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021ec000 0x4000>;
@@ -1083,7 +1094,7 @@
 				status = "disabled";
 			};
 
-			uart4: serial@021f0000 {
+			uart4: serial@21f0000 {
 				compatible = "fsl,imx6sx-uart",
 					     "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f0000 0x4000>;
@@ -1096,7 +1107,7 @@
 				status = "disabled";
 			};
 
-			uart5: serial@021f4000 {
+			uart5: serial@21f4000 {
 				compatible = "fsl,imx6sx-uart",
 					     "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f4000 0x4000>;
@@ -1109,7 +1120,7 @@
 				status = "disabled";
 			};
 
-			i2c4: i2c@021f8000 {
+			i2c4: i2c@21f8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
@@ -1120,21 +1131,21 @@
 			};
 		};
 
-		aips3: aips-bus@02200000 {
+		aips3: aips-bus@2200000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x02200000 0x100000>;
 			ranges;
 
-			spba-bus@02200000 {
+			spba-bus@2200000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x02240000 0x40000>;
 				ranges;
 
-				csi1: csi@02214000 {
+				csi1: csi@2214000 {
 					reg = <0x02214000 0x4000>;
 					interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
@@ -1144,7 +1155,7 @@
 					status = "disabled";
 				};
 
-				pxp: pxp@02218000 {
+				pxp: pxp@2218000 {
 					reg = <0x02218000 0x4000>;
 					interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SX_CLK_PXP_AXI>,
@@ -1153,7 +1164,7 @@
 					status = "disabled";
 				};
 
-				csi2: csi@0221c000 {
+				csi2: csi@221c000 {
 					reg = <0x0221c000 0x4000>;
 					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
@@ -1163,7 +1174,7 @@
 					status = "disabled";
 				};
 
-				lcdif1: lcdif@02220000 {
+				lcdif1: lcdif@2220000 {
 					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
 					reg = <0x02220000 0x4000>;
 					interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>;
@@ -1174,7 +1185,7 @@
 					status = "disabled";
 				};
 
-				lcdif2: lcdif@02224000 {
+				lcdif2: lcdif@2224000 {
 					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
 					reg = <0x02224000 0x4000>;
 					interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>;
@@ -1185,7 +1196,7 @@
 					status = "disabled";
 				};
 
-				vadc: vadc@02228000 {
+				vadc: vadc@2228000 {
 					reg = <0x02228000 0x4000>, <0x0222c000 0x4000>;
 					reg-names = "vadc-vafe", "vadc-vdec";
 					clocks = <&clks IMX6SX_CLK_VADC>,
@@ -1195,7 +1206,7 @@
 				};
 			};
 
-			adc1: adc@02280000 {
+			adc1: adc@2280000 {
 				compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
 				reg = <0x02280000 0x4000>;
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
@@ -1206,7 +1217,7 @@
 				status = "disabled";
 			};
 
-			adc2: adc@02284000 {
+			adc2: adc@2284000 {
 				compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
 				reg = <0x02284000 0x4000>;
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
@@ -1217,7 +1228,7 @@
 				status = "disabled";
 			};
 
-			wdog3: wdog@02288000 {
+			wdog3: wdog@2288000 {
 				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 				reg = <0x02288000 0x4000>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -1225,7 +1236,7 @@
 				status = "disabled";
 			};
 
-			ecspi5: ecspi@0228c000 {
+			ecspi5: ecspi@228c000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -1237,7 +1248,7 @@
 				status = "disabled";
 			};
 
-			uart6: serial@022a0000 {
+			uart6: serial@22a0000 {
 				compatible = "fsl,imx6sx-uart",
 					     "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x022a0000 0x4000>;
@@ -1250,7 +1261,7 @@
 				status = "disabled";
 			};
 
-			pwm5: pwm@022a4000 {
+			pwm5: pwm@22a4000 {
 				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 				reg = <0x022a4000 0x4000>;
 				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -1260,7 +1271,7 @@
 				#pwm-cells = <2>;
 			};
 
-			pwm6: pwm@022a8000 {
+			pwm6: pwm@22a8000 {
 				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 				reg = <0x022a8000 0x4000>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -1270,7 +1281,7 @@
 				#pwm-cells = <2>;
 			};
 
-			pwm7: pwm@022ac000 {
+			pwm7: pwm@22ac000 {
 				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 				reg = <0x022ac000 0x4000>;
 				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -1280,7 +1291,7 @@
 				#pwm-cells = <2>;
 			};
 
-			pwm8: pwm@0022b0000 {
+			pwm8: pwm@22b0000 {
 				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 				reg = <0x0022b0000 0x4000>;
 				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;