ARM: dts: opos6ul/opos6uldev: rework device tree to support i.MX6ULL

Rework the device trees of the OPOS6UL and OPOS6ULDev boards to support
the OPOS6UL SoM with an i.MX6ULL SoC.  The device trees are now as
following:

- imx6ul-imx6ull-opos6ul.dtsi
  common for both i.MX6UL and i.MX6ULL OPOS6UL SoM.
- imx6ul-opos6ul.dtsi
  for i.MX6UL OPOS6UL SoM. It includes imx6ul.dtsi and
  imx6ul-imx6ull-opos6ul.dtsi.
- imx6ull-opos6ul.dtsi
  for i.MX6ULL OPOS6UL SoM. It includes imx6ull.dtsi and
  imx6ul-imx6ull-opos6ul.dtsi.

- imx6ul-imx6ull-opos6uldev.dtsi
  OPOS6ULDev base device tree.
- imx6ul-opos6uldev.dts
  OPOS6ULDev board with an i.MX6UL OPOS6UL SoM. It includes
  imx6ul-opos6ul.dtsi and imx6ul-imx6ull-opos6uldevdtsi.
- imx6ull-opos6uldev.dts
  OPOS6ULDev board with an i.MX6ULL OPOS6UL SoM. It includes
  imx6ull-opos6ul.dtsi and imx6ul-imx6ull-opos6uldevdtsi.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

1 files changed, 8 insertions, 374 deletions

diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts
index 8ecdb9ad2b2e..375b98d7205a 100644
--- a/arch/arm/boot/dts/imx6ul-opos6uldev.dts
+++ b/arch/arm/boot/dts/imx6ul-opos6uldev.dts
@@ -1,293 +1,21 @@
-/*
- * Copyright 2017 Armadeus Systems <support@armadeus.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2017 Armadeus Systems <support@armadeus.com>
 
 /dts-v1/;
 #include "imx6ul-opos6ul.dtsi"
+#include "imx6ul-imx6ull-opos6uldev.dtsi"
 
 / {
-	model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board";
-	compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 191000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_5v>;
-		status = "okay";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		user-button {
-			label = "User button";
-			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user-led {
-			label = "User";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_led>;
-			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	onewire {
-		compatible = "w1-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_w1>;
-		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	panel: panel {
-		compatible = "armadeus,st0700-adapt";
-		power-supply = <&reg_3v3>;
-		backlight = <&backlight>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lcdif_out>;
-			};
-		};
-	};
-
-	reg_5v: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbotg1_vbus: regulator-usbotg1vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbotg1vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg1_vbus>;
-		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usbotg2_vbus: regulator-usbotg2vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbotg2vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg2_vbus>;
-		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_3v3>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&ecspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <5000000>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock_frequency = <400000>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock_frequency = <400000>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif>;
-	status = "okay";
-
-	port {
-		lcdif_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "disabled";
-};
-
-&tsc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
-	measure-delay-time = <0xffff>;
-	pre-charge-time = <0xffff>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1_id>;
-	vbus-supply = <&reg_usbotg1_vbus>;
-	dr_mode = "otg";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usbotg2_vbus>;
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
+	model = "Armadeus Systems OPOS6UL SoM (i.MX6UL) on OPOS6ULDev board";
+	compatible = "armadeus,imx6ul-opos6uldev", "armadeus,imx6ul-opos6ul", "fsl,imx6ul";
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpios>;
+	pinctrl-0 = <&pinctrl_gpios>, <&pinctrl_tamper_gpios>;
 
-	pinctrl_ecspi4: ecspi4grp {
+	pinctrl_tamper_gpios: tampergpiosgrp {
 		fsl,pins = <
-			MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK	0x1b0b0
-			MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI	0x1b0b0
-			MX6UL_PAD_NAND_DATA06__ECSPI4_MISO	0x1b0b0
-			MX6UL_PAD_NAND_DATA01__GPIO4_IO03	0x1b0b0
-			MX6UL_PAD_NAND_DATA07__GPIO4_IO09	0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
-			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x0b0b0
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_gpios: gpiosgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x0b0b0
-			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x0b0b0
-			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x0b0b0
-			MX6UL_PAD_NAND_RE_B__GPIO4_IO00		0x0b0b0
-			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x0b0b0
-			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0b0b0
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0b0b0
-			MX6UL_PAD_NAND_WE_B__GPIO4_IO01		0x0b0b0
 			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0b0b0
 			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x0b0b0
 			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x0b0b0
@@ -299,100 +27,6 @@
 		>;
 	};
 
-	pinctrl_gpio_keys: gpiokeysgrp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x0b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
-			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
-		>;
-	};
-
-	pinctrl_lcdif: lcdifgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x100b1
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x100b1
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x100b1
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x100b1
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x100b1
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x100b1
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x100b1
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x100b1
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x100b1
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x100b1
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x100b1
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x100b1
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x100b1
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x100b1
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x100b1
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x100b1
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x100b1
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x100b1
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x100b1
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x100b1
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x100b1
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x100b1
-		>;
-	};
-
-	pinctrl_led: ledgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0x0b0b0
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_ALE__PWM3_OUT		0x1b0b0
-		>;
-	};
-
-	pinctrl_tsc: tscgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01       0xb0
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02       0xb0
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03       0xb0
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04       0xb0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1_id: usbotg1idgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x1b0b0
-		>;
-	};
-
-	pinctrl_usbotg1_vbus: usbotg1vbusgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x1b0b0
-		>;
-	};
-
 	pinctrl_usbotg2_vbus: usbotg2vbusgrp {
 		fsl,pins = <
 			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x1b0b0