ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 161 deletions

diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
deleted file mode 100644
index e33723160ce7..000000000000
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ /dev/null
@@ -1,161 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/ {
-	mbus@f1000000 {
-		pciec: pcie@82000000 {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-			        0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0       1 0 /* Port 1.0 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0       1 0 /* Port 1.0 IO  */>;
-
-			pcie0: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-names = "intx", "error";
-				interrupts = <9>, <44>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
-						<0 0 0 2 &pcie0_intc 1>,
-						<0 0 0 3 &pcie0_intc 2>,
-						<0 0 0 4 &pcie0_intc 3>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-
-				pcie0_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie1: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-names = "intx", "error";
-				interrupts = <10>, <45>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
-						<0 0 0 2 &pcie1_intc 1>,
-						<0 0 0 3 &pcie1_intc 2>,
-						<0 0 0 4 &pcie1_intc 3>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 18>;
-				status = "disabled";
-
-				pcie1_intc: interrupt-controller {
-					interrupt-controller;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-	};
-	ocp@f1000000 {
-
-		pinctrl: pin-controller@10000 {
-			compatible = "marvell,88f6282-pinctrl";
-
-			pmx_sata0: pmx-sata0 {
-				marvell,pins = "mpp5", "mpp21", "mpp23";
-				marvell,function = "sata0";
-			};
-			pmx_sata1: pmx-sata1 {
-				marvell,pins = "mpp4", "mpp20", "mpp22";
-				marvell,function = "sata1";
-			};
-
-			/*
-			 * Default I2C1 pinctrl setting on mpp36/mpp37,
-			 * overwrite marvell,pins on board level if required.
-			 */
-			pmx_twsi1: pmx-twsi1 {
-				marvell,pins = "mpp36", "mpp37";
-				marvell,function = "twsi1";
-			};
-
-			pmx_sdio: pmx-sdio {
-				marvell,pins = "mpp12", "mpp13", "mpp14",
-					       "mpp15", "mpp16", "mpp17";
-				marvell,function = "sdio";
-			};
-		};
-
-		thermal: thermal@10078 {
-			compatible = "marvell,kirkwood-thermal";
-			reg = <0x10078 0x4>;
-			status = "okay";
-		};
-
-		rtc: rtc@10300 {
-			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
-			reg = <0x10300 0x20>;
-			interrupts = <53>;
-			clocks = <&gate_clk 7>;
-		};
-
-		i2c1: i2c@11100 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0x11100 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <32>;
-			clock-frequency = <100000>;
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_twsi1>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		sata: sata@80000 {
-			compatible = "marvell,orion-sata";
-			reg = <0x80000 0x5000>;
-			interrupts = <21>;
-			clocks = <&gate_clk 14>, <&gate_clk 15>;
-			clock-names = "0", "1";
-			phys = <&sata_phy0>, <&sata_phy1>;
-			phy-names = "port0", "port1";
-			status = "disabled";
-		};
-
-		sdio: mvsdio@90000 {
-			compatible = "marvell,orion-sdio";
-			reg = <0x90000 0x200>;
-			interrupts = <28>;
-			clocks = <&gate_clk 4>;
-			pinctrl-0 = <&pmx_sdio>;
-			pinctrl-names = "default";
-			bus-width = <4>;
-			cap-sdio-irq;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			status = "disabled";
-		};
-	};
-};