ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 180 deletions

diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
deleted file mode 100644
index 5aa4669ae254..000000000000
--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
+++ /dev/null
@@ -1,180 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * kirkwood-pogoplug-series-4.dts - Device tree file for PogoPlug Series 4
- * inspired by the board files made by Kevin Mihelich for ArchLinux,
- * and their DTS file.
- *
- * Copyright (C) 2015 Linus Walleij <linus.walleij@linaro.org>
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6192.dtsi"
-#include <dt-bindings/input/linux-event-codes.h>
-
-/ {
-	model = "Cloud Engines PogoPlug Series 4";
-	compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
-		     "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	chosen {
-		stdout-path = "uart0:115200n8";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_eject>;
-		pinctrl-names = "default";
-
-		eject {
-			debounce-interval = <50>;
-			wakeup-source;
-			linux,code = <KEY_EJECTCD>;
-			label = "Eject Button";
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_green &pmx_led_red>;
-		pinctrl-names = "default";
-
-		health {
-			label = "pogoplugv4:green:health";
-			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		fault {
-			label = "pogoplugv4:red:fault";
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pinctrl {
-	pmx_sata0: pmx-sata0 {
-		marvell,pins = "mpp21";
-		marvell,function = "sata0";
-	};
-
-	pmx_sata1: pmx-sata1 {
-		marvell,pins = "mpp20";
-		marvell,function = "sata1";
-	};
-
-	pmx_sdio_cd: pmx-sdio-cd {
-		marvell,pins = "mpp27";
-		marvell,function = "gpio";
-	};
-
-	pmx_sdio_wp: pmx-sdio-wp {
-		marvell,pins = "mpp28";
-		marvell,function = "gpio";
-	};
-
-	pmx_button_eject: pmx-button-eject {
-		marvell,pins = "mpp29";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_green: pmx-led-green {
-		marvell,pins = "mpp22";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_red: pmx-led-red {
-		marvell,pins = "mpp24";
-		marvell,function = "gpio";
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-/*
- * This PCIE controller has a USB 3.0 XHCI controller at 1,0
- */
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-	pinctrl-names = "default";
-	nr-ports = <1>;
-};
-
-&sdio {
-	status = "okay";
-	pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
-	pinctrl-names = "default";
-	cd-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-};
-
-&nand {
-	/* 128 MiB of NAND flash */
-	chip-delay = <40>;
-	status = "okay";
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x00000000 0x200000>;
-			read-only;
-		};
-
-		partition@200000 {
-			label = "uImage";
-			reg = <0x00200000 0x300000>;
-		};
-
-		partition@500000 {
-			label = "uImage2";
-			reg = <0x00500000 0x300000>;
-		};
-
-		partition@800000 {
-			label = "failsafe";
-			reg = <0x00800000 0x800000>;
-		};
-
-		partition@1000000 {
-			label = "root";
-			reg = <0x01000000 0x7000000>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};