ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 508 deletions

diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
deleted file mode 100644
index 974410918f35..000000000000
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ /dev/null
@@ -1,508 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * NXP LPC32xx SoC
- *
- * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com>
- * Copyright 2012 Roland Stigge <stigge@antcom.de>
- */
-
-#include <dt-bindings/clock/lpc32xx-clock.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "nxp,lpc3220";
-	interrupt-parent = <&mic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0x0>;
-		};
-	};
-
-	clocks {
-		xtal_32k: xtal_32k {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "xtal_32k";
-		};
-
-		xtal: xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <13000000>;
-			clock-output-names = "xtal";
-		};
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x00000000 0x10000000>,
-			 <0x20000000 0x20000000 0x30000000>,
-			 <0xe0000000 0xe0000000 0x04000000>;
-
-		iram: sram@8000000 {
-			compatible = "mmio-sram";
-			reg = <0x08000000 0x20000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 0x08000000 0x20000>;
-		};
-
-		/*
-		 * Enable either SLC or MLC
-		 */
-		slc: flash@20020000 {
-			compatible = "nxp,lpc3220-slc";
-			reg = <0x20020000 0x1000>;
-			clocks = <&clk LPC32XX_CLK_SLC>;
-			status = "disabled";
-		};
-
-		mlc: flash@200a8000 {
-			compatible = "nxp,lpc3220-mlc";
-			reg = <0x200a8000 0x11000>;
-			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk LPC32XX_CLK_MLC>;
-			status = "disabled";
-		};
-
-		dma: dma@31000000 {
-			compatible = "arm,pl080", "arm,primecell";
-			reg = <0x31000000 0x1000>;
-			interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk LPC32XX_CLK_DMA>;
-			clock-names = "apb_pclk";
-		};
-
-		usb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0x0 0x31020000 0x00001000>;
-
-			/*
-			 * Enable either ohci or usbd (gadget)!
-			 */
-			ohci: ohci@0 {
-				compatible = "nxp,ohci-nxp", "usb-ohci";
-				reg = <0x0 0x300>;
-				interrupt-parent = <&sic1>;
-				interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&usbclk LPC32XX_USB_CLK_HOST>;
-				status = "disabled";
-			};
-
-			usbd: usbd@0 {
-				compatible = "nxp,lpc3220-udc";
-				reg = <0x0 0x300>;
-				interrupt-parent = <&sic1>;
-				interrupts = <29 IRQ_TYPE_LEVEL_HIGH>,
-					     <30 IRQ_TYPE_LEVEL_HIGH>,
-					     <28 IRQ_TYPE_LEVEL_HIGH>,
-					     <26 IRQ_TYPE_LEVEL_LOW>;
-				clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>;
-				status = "disabled";
-			};
-
-			i2cusb: i2c@300 {
-				compatible = "nxp,pnx-i2c";
-				reg = <0x300 0x100>;
-				interrupt-parent = <&sic1>;
-				interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&usbclk LPC32XX_USB_CLK_I2C>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			usbclk: clock-controller@f00 {
-				compatible = "nxp,lpc3220-usb-clk";
-				reg = <0xf00 0x100>;
-				#clock-cells = <1>;
-			};
-		};
-
-		clcd: clcd@31040000 {
-			compatible = "arm,pl111", "arm,primecell";
-			reg = <0x31040000 0x1000>;
-			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>;
-			clock-names = "clcdclk", "apb_pclk";
-			status = "disabled";
-		};
-
-		mac: ethernet@31060000 {
-			compatible = "nxp,lpc-eth";
-			reg = <0x31060000 0x1000>;
-			interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk LPC32XX_CLK_MAC>;
-			status = "disabled";
-		};
-
-		emc: memory-controller@31080000 {
-			compatible = "arm,pl175", "arm,primecell";
-			reg = <0x31080000 0x1000>;
-			clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>;
-			clock-names = "mpmcclk", "apb_pclk";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xe0000000 0x01000000>,
-				 <1 0xe1000000 0x01000000>,
-				 <2 0xe2000000 0x01000000>,
-				 <3 0xe3000000 0x01000000>;
-			status = "disabled";
-		};
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0x20000000 0x20000000 0x30000000>;
-
-			/*
-			 * ssp0 and spi1 are shared pins;
-			 * enable one in your board dts, as needed.
-			 */
-			ssp0: spi@20084000 {
-				compatible = "arm,pl022", "arm,primecell";
-				reg = <0x20084000 0x1000>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk LPC32XX_CLK_SSP0>;
-				clock-names = "apb_pclk";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			spi1: spi@20088000 {
-				compatible = "nxp,lpc3220-spi";
-				reg = <0x20088000 0x1000>;
-				clocks = <&clk LPC32XX_CLK_SPI1>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			/*
-			 * ssp1 and spi2 are shared pins;
-			 * enable one in your board dts, as needed.
-			 */
-			ssp1: spi@2008c000 {
-				compatible = "arm,pl022", "arm,primecell";
-				reg = <0x2008c000 0x1000>;
-				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk LPC32XX_CLK_SSP1>;
-				clock-names = "apb_pclk";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			spi2: spi@20090000 {
-				compatible = "nxp,lpc3220-spi";
-				reg = <0x20090000 0x1000>;
-				clocks = <&clk LPC32XX_CLK_SPI2>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2s0: i2s@20094000 {
-				compatible = "nxp,lpc3220-i2s";
-				reg = <0x20094000 0x1000>;
-				status = "disabled";
-			};
-
-			sd: sd@20098000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				reg = <0x20098000 0x1000>;
-				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
-					     <13 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk LPC32XX_CLK_SD>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			i2s1: i2s@2009c000 {
-				compatible = "nxp,lpc3220-i2s";
-				reg = <0x2009c000 0x1000>;
-				status = "disabled";
-			};
-
-			/* UART5 first since it is the default console, ttyS0 */
-			uart5: serial@40090000 {
-				/* actually, ns16550a w/ 64 byte fifos! */
-				compatible = "nxp,lpc3220-uart";
-				reg = <0x40090000 0x1000>;
-				interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
-				reg-shift = <2>;
-				clocks = <&clk LPC32XX_CLK_UART5>;
-				status = "disabled";
-			};
-
-			uart3: serial@40080000 {
-				compatible = "nxp,lpc3220-uart";
-				reg = <0x40080000 0x1000>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-				reg-shift = <2>;
-				clocks = <&clk LPC32XX_CLK_UART3>;
-				status = "disabled";
-			};
-
-			uart4: serial@40088000 {
-				compatible = "nxp,lpc3220-uart";
-				reg = <0x40088000 0x1000>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-				reg-shift = <2>;
-				clocks = <&clk LPC32XX_CLK_UART4>;
-				status = "disabled";
-			};
-
-			uart6: serial@40098000 {
-				compatible = "nxp,lpc3220-uart";
-				reg = <0x40098000 0x1000>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-				reg-shift = <2>;
-				clocks = <&clk LPC32XX_CLK_UART6>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@400a0000 {
-				compatible = "nxp,pnx-i2c";
-				reg = <0x400a0000 0x100>;
-				interrupt-parent = <&sic1>;
-				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk LPC32XX_CLK_I2C1>;
-			};
-
-			i2c2: i2c@400a8000 {
-				compatible = "nxp,pnx-i2c";
-				reg = <0x400a8000 0x100>;
-				interrupt-parent = <&sic1>;
-				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clk LPC32XX_CLK_I2C2>;
-			};
-
-			mpwm: mpwm@400e8000 {
-				compatible = "nxp,lpc3220-motor-pwm";
-				reg = <0x400e8000 0x78>;
-				status = "disabled";
-				#pwm-cells = <2>;
-			};
-		};
-
-		fab {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0x20000000 0x20000000 0x30000000>;
-
-			/* System Control Block */
-			scb {
-				compatible = "simple-bus";
-				ranges = <0x0 0x40004000 0x00001000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				clk: clock-controller@0 {
-					compatible = "nxp,lpc3220-clk";
-					reg = <0x00 0x114>;
-					#clock-cells = <1>;
-
-					clocks = <&xtal_32k>, <&xtal>;
-					clock-names = "xtal_32k", "xtal";
-				};
-			};
-
-			mic: interrupt-controller@40008000 {
-				compatible = "nxp,lpc3220-mic";
-				reg = <0x40008000 0x4000>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			sic1: interrupt-controller@4000c000 {
-				compatible = "nxp,lpc3220-sic";
-				reg = <0x4000c000 0x4000>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-
-				interrupt-parent = <&mic>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
-					     <30 IRQ_TYPE_LEVEL_LOW>;
-				};
-
-			sic2: interrupt-controller@40010000 {
-				compatible = "nxp,lpc3220-sic";
-				reg = <0x40010000 0x4000>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-
-				interrupt-parent = <&mic>;
-				interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
-					     <31 IRQ_TYPE_LEVEL_LOW>;
-			};
-
-			uart1: serial@40014000 {
-				compatible = "nxp,lpc3220-hsuart";
-				reg = <0x40014000 0x1000>;
-				interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			uart2: serial@40018000 {
-				compatible = "nxp,lpc3220-hsuart";
-				reg = <0x40018000 0x1000>;
-				interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			uart7: serial@4001c000 {
-				compatible = "nxp,lpc3220-hsuart";
-				reg = <0x4001c000 0x1000>;
-				interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			rtc: rtc@40024000 {
-				compatible = "nxp,lpc3220-rtc";
-				reg = <0x40024000 0x1000>;
-				interrupt-parent = <&sic1>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk LPC32XX_CLK_RTC>;
-			};
-
-			gpio: gpio@40028000 {
-				compatible = "nxp,lpc3220-gpio";
-				reg = <0x40028000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <3>; /* bank, pin, flags */
-			};
-
-			timer4: timer@4002c000 {
-				compatible = "nxp,lpc3220-timer";
-				reg = <0x4002c000 0x1000>;
-				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-				clocks = <&clk LPC32XX_CLK_TIMER4>;
-				clock-names = "timerclk";
-				status = "disabled";
-			};
-
-			timer5: timer@40030000 {
-				compatible = "nxp,lpc3220-timer";
-				reg = <0x40030000 0x1000>;
-				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-				clocks = <&clk LPC32XX_CLK_TIMER5>;
-				clock-names = "timerclk";
-				status = "disabled";
-			};
-
-			watchdog: watchdog@4003c000 {
-				compatible = "nxp,pnx4008-wdt";
-				reg = <0x4003c000 0x1000>;
-				clocks = <&clk LPC32XX_CLK_WDOG>;
-			};
-
-			timer0: timer@40044000 {
-				compatible = "nxp,lpc3220-timer";
-				reg = <0x40044000 0x1000>;
-				clocks = <&clk LPC32XX_CLK_TIMER0>;
-				clock-names = "timerclk";
-				interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-			};
-
-			/*
-			 * TSC vs. ADC: Since those two share the same
-			 * hardware, you need to choose from one of the
-			 * following two and do 'status = "okay";' for one of
-			 * them
-			 */
-
-			adc: adc@40048000 {
-				compatible = "nxp,lpc3220-adc";
-				reg = <0x40048000 0x1000>;
-				interrupt-parent = <&sic1>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk LPC32XX_CLK_ADC>;
-				status = "disabled";
-			};
-
-			tsc: tsc@40048000 {
-				compatible = "nxp,lpc3220-tsc";
-				reg = <0x40048000 0x1000>;
-				interrupt-parent = <&sic1>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk LPC32XX_CLK_ADC>;
-				status = "disabled";
-			};
-
-			timer1: timer@4004c000 {
-				compatible = "nxp,lpc3220-timer";
-				reg = <0x4004c000 0x1000>;
-				interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-				clocks = <&clk LPC32XX_CLK_TIMER1>;
-				clock-names = "timerclk";
-			};
-
-			key: key@40050000 {
-				compatible = "nxp,lpc3220-key";
-				reg = <0x40050000 0x1000>;
-				clocks = <&clk LPC32XX_CLK_KEY>;
-				interrupt-parent = <&sic1>;
-				interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			timer2: timer@40058000 {
-				compatible = "nxp,lpc3220-timer";
-				reg = <0x40058000 0x1000>;
-				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
-				clocks = <&clk LPC32XX_CLK_TIMER2>;
-				clock-names = "timerclk";
-				status = "disabled";
-			};
-
-			pwm1: pwm@4005c000 {
-				compatible = "nxp,lpc3220-pwm";
-				reg = <0x4005c000 0x4>;
-				clocks = <&clk LPC32XX_CLK_PWM1>;
-				assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
-				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
-				status = "disabled";
-			};
-
-			pwm2: pwm@4005c004 {
-				compatible = "nxp,lpc3220-pwm";
-				reg = <0x4005c004 0x4>;
-				clocks = <&clk LPC32XX_CLK_PWM2>;
-				assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
-				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
-				status = "disabled";
-			};
-
-			timer3: timer@40060000 {
-				compatible = "nxp,lpc3220-timer";
-				reg = <0x40060000 0x1000>;
-				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
-				clocks = <&clk LPC32XX_CLK_TIMER3>;
-				clock-names = "timerclk";
-				status = "disabled";
-			};
-		};
-	};
-};