ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 309 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts b/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts
new file mode 100644
index 000000000000..fec7269088d1
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox3-hs.dts - Device Tree file for Overkiz KIZBOX3-HS board
+ *
+ * Copyright (C) 2018 Overkiz SAS
+ *
+ * Authors: Dorian Rocipon <d.rocipon@overkiz.com>
+ *          Kevin Carli <k.carli@overkiz.com>
+ *          Mickael Gardet <m.gardet@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox3_common.dtsi"
+
+/ {
+	model = "Overkiz KIZBOX3-HS";
+	compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5";
+
+	led-controller-1 {
+		status = "okay";
+
+		led-1 {
+			status = "okay";
+		};
+
+		led-2 {
+			status = "okay";
+		};
+
+		led-3 {
+			status = "okay";
+		};
+
+		led-4 {
+			status = "okay";
+		};
+	};
+
+	led-controller-2  {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_red
+			     &pinctrl_led_white>;
+		status = "okay";
+
+		led-5 {
+			label = "pio:red:user";
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-6 {
+			label = "pio:white:user";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default" , "default", "default",
+				"default", "default" ;
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+		pinctrl-1 = <&pinctrl_pio_rf &pinctrl_pio_wifi>;
+		pinctrl-2 = <&pinctrl_pio_io_boot
+			     &pinctrl_pio_io_reset
+			     &pinctrl_pio_io_test_radio>;
+		pinctrl-3 = <&pinctrl_pio_zbe_test_radio
+			     &pinctrl_pio_zbe_rst>;
+		pinctrl-4 = <&pinctrl_pio_input>;
+
+		switch-1 {
+			label = "SW1";
+			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x101>;
+			wakeup-source;
+		};
+
+		switch-2 {
+			label = "SW2";
+			gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			wakeup-source;
+		};
+
+		switch-3 {
+			label = "SW3";
+			gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		switch-7 {
+			label = "SW7";
+			gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
+			linux,code = <0x107>;
+			wakeup-source;
+		};
+
+		switch-8 {
+			label = "SW8";
+			gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
+			linux,code = <0x108>;
+			wakeup-source;
+		};
+	};
+
+	gpios {
+		compatible = "gpio";
+		status = "okay";
+
+		rf_on {
+			label = "rf on";
+			gpio = <&pioA PIN_PC19 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		wifi_on {
+			label = "wifi on";
+			gpio = <&pioA PIN_PC20 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		zbe_test_radio {
+			label = "zbe test radio";
+			gpio = <&pioA PIN_PB21 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		zbe_rst {
+			label = "zbe rst";
+			gpio = <&pioA PIN_PB25 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_reset {
+			label = "io reset";
+			gpio = <&pioA PIN_PB30 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_test_radio {
+			label = "io test radio";
+			gpio = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_boot_0 {
+			label = "io boot 0";
+			gpio = <&pioA PIN_PC11 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_boot_1 {
+			label = "io boot 1";
+			gpio = <&pioA PIN_PC17 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		verbose_bootloader {
+			label = "verbose bootloader";
+			gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		 nail_bed_detection  {
+			label = "nail bed detection";
+			gpio = <&pioA PIN_PB12 GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		 id_usba {
+			label = "id usba";
+			gpio = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>;
+			input;
+		};
+	};
+};
+
+&pioA {
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PA22__GPIO>,
+		<PIN_PA24__GPIO>,
+		<PIN_PA26__GPIO>,
+		<PIN_PA29__GPIO>,
+		<PIN_PA18__GPIO>;
+		bias-disable;
+		};
+
+	pinctrl_gpio {
+		pinctrl_pio_rf: gpio_rf {
+			pinmux = <PIN_PC19__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_wifi: gpio_wifi {
+			pinmux = <PIN_PC20__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_io_boot: gpio_io_boot {
+			pinmux =
+			<PIN_PC11__GPIO>,
+			<PIN_PC17__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_io_test_radio: gpio_io_test_radio {
+			pinmux = <PIN_PC9__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_zbe_test_radio: gpio_zbe_test_radio {
+			pinmux = <PIN_PB21__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_zbe_rst: gpio_zbe_rst {
+			pinmux = <PIN_PB25__GPIO>;
+			bias-disable;
+		};
+		/* stm32 reset must be open drain (internal pull up) */
+		pinctrl_pio_io_reset: gpio_io_reset {
+			pinmux = <PIN_PB30__GPIO>;
+			bias-disable;
+			drive-open-drain;
+			output-low;
+		};
+		pinctrl_pio_input: gpio_input {
+			pinmux =
+			<PIN_PB11__GPIO>,
+			<PIN_PB12__GPIO>,
+			<PIN_PC0__GPIO>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_leds {
+		pinctrl_led_red: led_red {
+			pinmux = <PIN_PB1__GPIO>;
+			bias-disable;
+		};
+		pinctrl_led_white: led_white {
+			pinmux = <PIN_PB8__GPIO>;
+			bias-disable;
+		};
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&flx0 {
+	status = "okay";
+
+	uart5: serial@200  {
+			status = "okay";
+	};
+};
+
+&flx3 {
+	status = "okay";
+	uart8: serial@200 {
+		status = "okay";
+	};
+};
+
+&flx4 {
+	status = "okay";
+
+	i2c6: i2c@600 {
+		status = "okay";
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};