ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 607 deletions

diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
deleted file mode 100644
index f528511c2537..000000000000
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ /dev/null
@@ -1,607 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011-2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-#include <dt-bindings/input/input.h>
-#include "elpida_ecb240abacn.dtsi"
-#include "omap4-mcpdm.dtsi"
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		dsp_memory_region: dsp-memory@98000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x98000000 0x800000>;
-			reusable;
-			status = "okay";
-		};
-
-		ipu_memory_region: ipu-memory@98800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x98800000 0x7000000>;
-			reusable;
-			status = "okay";
-		};
-	};
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	aliases {
-		display0 = &dvi0;
-		display1 = &hdmi0;
-		ethernet = &ethernet;
-	};
-
-	leds: leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <
-			&led_wkgpio_pins
-		>;
-
-		led-heartbeat {
-			label = "pandaboard::status1";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-mmc {
-			label = "pandaboard::status2";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	gpio_keys: gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <
-			&button_pins
-		>;
-
-		buttonS2 {
-			label = "button S2";
-			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
-			linux,code = <BTN_0>;
-			wakeup-source;
-		};
-	};
-
-	sound: sound {
-		compatible = "ti,abe-twl6040";
-		ti,model = "PandaBoard";
-
-		ti,mclk-freq = <38400000>;
-
-		ti,mcpdm = <&mcpdm>;
-
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"Ext Spk", "HFL",
-			"Ext Spk", "HFR",
-			"Line Out", "AUXL",
-			"Line Out", "AUXR",
-			"HSMIC", "Headset Mic",
-			"Headset Mic", "Headset Mic Bias",
-			"AFML", "Line In",
-			"AFMR", "Line In";
-	};
-
-	/* HS USB Port 1 Power */
-	hsusb1_power: hsusb1_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb1_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;	/* gpio_1 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-		/*
-		 * boot-on is required along with always-on as the
-		 * regulator framework doesn't enable the regulator
-		 * if boot-on is not there.
-		 */
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
-		#phy-cells = <0>;
-		vcc-supply = <&hsusb1_power>;
-		clocks = <&auxclk3_ck>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-	};
-
-	/* regulator for wl12xx on sdio5 */
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	tfp410: encoder0 {
-		compatible = "ti,tfp410";
-		powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* gpio_0 */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector0 {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-
-		ddc-i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	tpd12s015: encoder1 {
-		compatible = "ti,tpd12s015";
-
-		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
-			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
-			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	hdmi0: connector1 {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&dss_dpi_pins
-			&tfp410_pins
-			&dss_hdmi_pins
-			&tpd12s015_pins
-			&hsusbb1_pins
-	>;
-
-	twl6040_pins: twl6040-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
-			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
-		>;
-	};
-
-	mcbsp1_pins: mcbsp1-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
-			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
-			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
-			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
-		>;
-	};
-
-	dss_dpi_pins: dss-dpi-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
-			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
-			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
-			OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
-			OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
-			OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
-			OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
-			OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
-			OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
-			OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
-			OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */
-
-			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
-			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
-			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
-			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
-			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
-			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
-			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
-			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
-			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
-			OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
-			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
-			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
-			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
-			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */
-
-			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
-			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
-			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
-		>;
-	};
-
-	tfp410_pins: tfp410-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
-		>;
-	};
-
-	dss_hdmi_pins: dss-hdmi-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
-			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
-			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
-		>;
-	};
-
-	tpd12s015_pins: tpd12s015-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
-			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
-			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
-		>;
-	};
-
-	hsusbb1_pins: hsusbb1-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
-			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
-			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
-			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
-			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
-			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
-			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
-			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
-			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
-			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
-			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
-			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
-		>;
-	};
-
-	i2c1_pins: i2c1-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: i2c2-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: i2c3-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	i2c4_pins: i2c4-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
-		>;
-	};
-
-	/*
-	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
-	 * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
-	 */
-	wl12xx_gpio: wl12xx-gpio-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
-			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
-			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
-		>;
-	};
-
-	/* wl12xx GPIO inputs and SDIO pins */
-	wl12xx_pins: wl12xx-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
-			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
-			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
-			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
-		>;
-	};
-
-	button_pins: button-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpio_121 */
-		>;
-	};
-};
-
-&omap4_pmx_wkup {
-	led_wkgpio_pins: leds-wkpins-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
-			OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		/* IRQ# = 7 */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		#clock-cells = <0>;
-		reg = <0x4b>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&twl6040_pins>;
-
-		/* IRQ# = 119 */
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
-		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
-
-		vio-supply = <&v1v8>;
-		v2v1-supply = <&v2v1>;
-		enable-active-high;
-	};
-};
-
-#include "twl6030.dtsi"
-#include "twl6030_omap4.dtsi"
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <100000>;
-
-	/*
-	 * Display monitor features are burnt in their EEPROM as EDID data.
-	 * The EEPROM is connected as I2C slave device.
-	 */
-	eeprom@50 {
-		compatible = "ti,eeprom";
-		reg = <0x50>;
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&wl12xx_pins>;
-	vmmc-supply = <&wl12xx_vmmc>;
-	interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core 0x10e>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		/* gpio_53 with gpmc_ncs3 pad as wakeup */
-		interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>,
-				      <&omap4_pmx_core 0x3a>;
-		interrupt-names = "irq", "wakeup";
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&emif1 {
-	cs1-used;
-	device-handle = <&elpida_ECB240ABACN>;
-};
-
-&emif2 {
-	cs1-used;
-	device-handle = <&elpida_ECB240ABACN>;
-};
-
-&mcbsp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-	status = "okay";
-};
-
-&twl_usb_comparator {
-	usb-supply = <&vusb>;
-};
-
-&uart2 {
-	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART2_RX>;
-};
-
-&uart3 {
-	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART3_RX>;
-};
-
-&uart4 {
-	interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART4_RX>;
-};
-
-&usb_otg_hs {
-	interface-type = <1>;
-	mode = <3>;
-	power = <50>;
-};
-
-&usbhshost {
-	port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	hub@1 {
-		compatible = "usb424,9514";
-		reg = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethernet: ethernet@1 {
-			compatible = "usb424,ec00";
-			reg = <1>;
-		};
-	};
-};
-
-&dss {
-	status = "okay";
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&dsi2 {
-	status = "okay";
-	vdd-supply = <&vcxio>;
-};
-
-&hdmi {
-	status = "okay";
-	vdda-supply = <&vdac>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
-
-&dsp {
-	status = "okay";
-	memory-region = <&dsp_memory_region>;
-	ti,timers = <&timer5>;
-	ti,watchdog-timers = <&timer6>;
-};
-
-&ipu {
-	status = "okay";
-	memory-region = <&ipu_memory_region>;
-	ti,timers = <&timer3>;
-	ti,watchdog-timers = <&timer9>, <&timer11>;
-};