Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:

 - A relatively large patch restores booting on i.MX platforms that
   failed to boot after a cleanup was merged for v4.10.

 - A quirk for USB needs to be enabled on the STi platform

 - On the Meson platform, we saw memory corruption with part of the
   memory used by the secure monitor, so we have to stay out of that
   area.

 - The same platform also has a problem with ethernet under load, which
   is fixed by disabling EEE negotiation.

 - imx6dl has an incorrect pin configuration, which prevents SPI from
   working.

 - Two maintainers have lost their access to their email addresses, so
   we should update the MAINTAINERS file before the release

 - Renaming one of the orion5x linkstation models to help simplify the
   debian install.

 - A couple of fixes for build warnings that were introduced during
   v4.10-rc.

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: defconfigs: make NF_CT_PROTO_SCTP and NF_CT_PROTO_UDPLITE built-in
  MAINTAINERS: socfpga: update email for Dinh Nguyen
  ARM: orion5x: fix Makefile for linkstation-lschl.dtb
  ARM: dts: orion5x-lschl: More consistent naming on linkstation series
  ARM: dts: orion5x-lschl: Fix model name
  MAINTAINERS: change email address from atmel to microchip
  MAINTAINERS: at91: change email address
  ARM64: dts: meson-gx: Add firmware reserved memory zones
  ARM64: dts: meson-gxbb-odroidc2: fix GbE tx link breakage
  ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk
  ARM: dts: imx: Pass 'chosen' and 'memory' nodes
  ARM: dts: imx6dl: fix GPIO4 range
  ARM: imx: hide unused variable in #ifdef

1 files changed, 171 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/orion5x-linkstation-lschl.dts b/arch/arm/boot/dts/orion5x-linkstation-lschl.dts
new file mode 100644
index 000000000000..ea6c881634b9
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-linkstation-lschl.dts
@@ -0,0 +1,171 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-CHLv3
+ *
+ * Copyright (C) 2016 Ash Hughes <ashley.hughes@blueyonder.co.uk>
+ * Copyright (C) 2015-2017
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "orion5x-linkstation.dtsi"
+#include "mvebu-linkstation-gpio-simple.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Buffalo Linkstation LiveV3 (LS-CHL)";
+	compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	gpio_keys {
+		func {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		power-on-switch {
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info &pmx_led_func>;
+		blue-power-led {
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		red-alarm-led {
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		amber-info-led {
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		func {
+			label = "lschl:func:blue:top";
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		gpios = <&gpio0 14 GPIO_ACTIVE_LOW
+			 &gpio0 16 GPIO_ACTIVE_LOW>;
+
+		alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	pmx_led_power: pmx-leds {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_switch: pmx-power-switch {
+		marvell,pins = "mpp8", "mpp10", "mpp15";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_high: pmx-fan-high {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_low: pmx-fan-low {
+		marvell,pins = "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_func: pmx-leds {
+		marvell,pins = "mpp17";
+		marvell,function = "gpio";
+	};
+
+	pmx_sw_init: pmx-sw-init {
+		marvell,pins = "mpp7";
+		marvell,function = "gpio";
+	};
+};
+
+&hdd_power {
+	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_power {
+	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+};
+