ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 973 deletions

diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
deleted file mode 100644
index db4c791b2e2f..000000000000
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ /dev/null
@@ -1,973 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
-#include "qcom-msm8660.dtsi"
-
-/ {
-	model = "Qualcomm APQ8060 Dragonboard";
-	compatible = "qcom,apq8060-dragonboard", "qcom,msm8660";
-
-	aliases {
-		serial0 = &gsbi12_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	/* Main power of the board: 3.7V */
-	vph: regulator-fixed {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-		regulator-name = "VPH";
-		regulator-type = "voltage";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	/* GPIO controlled ethernet power regulator */
-	dragon_veth: xc622a331mrg {
-		compatible = "regulator-fixed";
-		regulator-name = "XC6222A331MR-G";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vph>;
-		gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dragon_veth_gpios>;
-		regulator-always-on;
-	};
-
-	/* VDDvario fixed regulator */
-	dragon_vario: nds332p {
-		compatible = "regulator-fixed";
-		regulator-name = "NDS332P";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&pm8058_s3>;
-	};
-
-	/* This is a levelshifter for SDCC5 */
-	dragon_vio_txb: txb0104rgyr {
-		compatible = "regulator-fixed";
-		regulator-name = "Dragon SDCC levelshifter";
-		vin-supply = <&pm8058_l14>;
-		regulator-always-on;
-	};
-
-	/*
-	 * Capella CM3605 light and proximity sensor mounted directly
-	 * on the sensor board.
-	 */
-	cm3605 {
-		compatible = "capella,cm3605";
-		vdd-supply = <&pm8058_l14>; // 2.85V
-		aset-gpios = <&pm8058_gpio 35 GPIO_ACTIVE_LOW>;
-		capella,aset-resistance-ohms = <100000>;
-		/* Trig on both edges - getting close or far away */
-		interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
-		/* MPP05 analog input to the XOADC */
-		io-channels = <&xoadc 0x00 0x05>;
-		io-channel-names = "aout";
-		pinctrl-names = "default";
-		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
-	};
-};
-
-&ebi2 {
-	/* The EBI2 will instantiate first, then populate its children */
-	pinctrl-names = "default";
-	pinctrl-0 = <&dragon_ebi2_pins>;
-	status = "okay";
-
-	/*
-	 * An on-board SMSC LAN9221 chip for "debug ethernet",
-	 * which is actually just an ordinary ethernet on the
-	 * EBI2. This has a 25MHz chrystal next to it, so no
-	 * clocking is needed.
-	 */
-	ethernet@2,0 {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		reg = <2 0x0 0x100>;
-		/*
-		 * The second interrupt is the PME interrupt
-		 * for network wakeup, connected to the TLMM.
-		 */
-		interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
-				    <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
-		reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
-		vdd33a-supply = <&dragon_veth>;
-		vddvario-supply = <&dragon_vario>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dragon_ethernet_gpios>;
-		phy-mode = "mii";
-		reg-io-width = <2>;
-		smsc,force-external-phy;
-		smsc,irq-push-pull;
-
-		/*
-		 * SLOW chipselect config
-		 * Delay 9 cycles (140ns@64MHz) between SMSC
-		 * LAN9221 Ethernet controller reads and writes
-		 * on CS2.
-		 */
-		qcom,xmem-recovery-cycles = <0>;
-		qcom,xmem-write-hold-cycles = <3>;
-		qcom,xmem-write-delta-cycles = <31>;
-		qcom,xmem-read-delta-cycles = <28>;
-		qcom,xmem-write-wait-cycles = <9>;
-		qcom,xmem-read-wait-cycles = <9>;
-	};
-};
-
-&gsbi3 {
-	qcom,mode = <GSBI_PROT_I2C>;
-	status = "okay";
-};
-
-&gsbi3_i2c {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dragon_gsbi3_i2c_pins>;
-	status = "okay";
-
-	touchscreen@24 {
-		compatible = "cypress,cy8ctma340";
-		reg = <0x24>;
-		/* Certainly we can do at least 400 kHz */
-		clock-frequency = <400000>;
-		/* IRQ on GPIO61 called /CTP_INT */
-		interrupt-parent = <&tlmm>;
-		interrupts = <61 IRQ_TYPE_EDGE_FALLING>;
-		/*
-		 * The I2C bus is using a PCA9306 level translator from L16A
-		 * to L2B so these two voltages are needed and L16A is
-		 * kind of the IO voltage, however L16Aisn't really fed to
-		 * the TMA340, which relies entirely on L2B (PM8901 L2).
-		 */
-		vcpin-supply = <&pm8058_l16>;
-		vdd-supply = <&pm8901_l2>;
-		/* GPIO58, called WAKE_CTP */
-		reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-		touchscreen-size-x = <480>;
-		touchscreen-size-y = <800>;
-		active-interval-ms = <0>;
-		touch-timeout-ms = <255>;
-		lowpower-interval-ms = <10>;
-		bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dragon_tma340_gpios>;
-	};
-};
-
-&gsbi8 {
-	qcom,mode = <GSBI_PROT_I2C>;
-	status = "okay";
-};
-
-&gsbi8_i2c {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
-	status = "okay";
-
-	eeprom@52 {
-		/* A 16KiB Platform ID EEPROM on the CPU carrier board */
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-		vcc-supply = <&pm8058_s3>;
-		pagesize = <64>;
-	};
-	wm8903: wm8903@1a {
-		/* This Woolfson Micro device has an unrouted interrupt line */
-		compatible = "wlf,wm8903";
-		reg = <0x1a>;
-
-		AVDD-supply = <&pm8058_l16>;
-		CPVDD-supply = <&pm8058_l16>;
-		DBVDD-supply = <&pm8058_s3>;
-		DCVDD-supply = <&pm8058_l0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		micdet-cfg = <0>;
-		micdet-delay = <100>;
-		gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-	};
-};
-
-&gsbi12 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-};
-
-&gsbi12_serial {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dragon_gsbi12_serial_pins>;
-	status = "okay";
-};
-
-&gsbi12_i2c {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
-	status = "okay";
-
-	ak8975@c {
-		compatible = "asahi-kasei,ak8975";
-		reg = <0x0c>;
-		interrupt-parent = <&pm8058_gpio>;
-		interrupts = <33 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dragon_ak8975_gpios>;
-		vid-supply = <&pm8058_lvs0>; // 1.8V
-		vdd-supply = <&pm8058_l14>; // 2.85V
-	};
-	bmp085@77 {
-		compatible = "bosch,bmp085";
-		reg = <0x77>;
-		interrupt-parent = <&pm8058_gpio>;
-		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
-		reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dragon_bmp085_gpios>;
-		vddd-supply = <&pm8058_lvs0>; // 1.8V
-		vdda-supply = <&pm8058_l14>; // 2.85V
-	};
-	mpu3050@68 {
-		compatible = "invensense,mpu3050";
-		reg = <0x68>;
-		/*
-		 * GPIO17 is pulled high by a 10k
-		 * resistor to VLOGIC so needs to be
-		 * active low/falling edge.
-		 */
-		interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dragon_mpu3050_gpios>;
-		vlogic-supply = <&pm8058_lvs0>; // 1.8V
-		vdd-supply = <&pm8058_l14>; // 2.85V
-
-		/*
-		 * The MPU-3050 acts as a hub for the
-		 * accelerometer.
-		 */
-		i2c-gate {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			kxsd9@18 {
-				compatible = "kionix,kxsd9";
-				reg = <0x18>;
-				interrupt-parent = <&tlmm>;
-				interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_kxsd9_gpios>;
-				iovdd-supply = <&pm8058_lvs0>; // 1.8V
-				vdd-supply = <&pm8058_l14>; // 2.85V
-			};
-		};
-	};
-};
-
-&pm8058_gpio {
-	dragon_ethernet_gpios: ethernet-state {
-		pinconf {
-			pins = "gpio7";
-			function = "normal";
-			input-enable;
-			bias-disable;
-			power-source = <PM8058_GPIO_S3>;
-		};
-	};
-	dragon_bmp085_gpios: bmp085-state {
-		pinconf {
-			pins = "gpio16";
-			function = "normal";
-			input-enable;
-			bias-disable;
-			power-source = <PM8058_GPIO_S3>;
-		};
-	};
-	dragon_mpu3050_gpios: mpu3050-state {
-		pinconf {
-			pins = "gpio17";
-			function = "normal";
-			input-enable;
-			bias-disable;
-			power-source = <PM8058_GPIO_S3>;
-		};
-	};
-	dragon_sdcc3_gpios: sdcc3-state {
-		pinconf {
-			pins = "gpio22";
-			function = "normal";
-			input-enable;
-			bias-disable;
-			power-source = <PM8058_GPIO_S3>;
-		};
-	};
-	dragon_sdcc5_gpios: sdcc5-state {
-		pinconf {
-			pins = "gpio26";
-			function = "normal";
-			input-enable;
-			bias-pull-up;
-			qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
-			power-source = <PM8058_GPIO_S3>;
-		};
-	};
-	dragon_ak8975_gpios: ak8975-state {
-		pinconf {
-			pins = "gpio33";
-			function = "normal";
-			input-enable;
-			bias-disable;
-			power-source = <PM8058_GPIO_S3>;
-		};
-	};
-	dragon_cm3605_gpios: cm3605-state {
-		/* Pin 34 connected to the proxy IRQ */
-		gpio34-pins {
-			pins = "gpio34";
-			function = "normal";
-			input-enable;
-			bias-disable;
-			power-source = <PM8058_GPIO_S3>;
-		};
-		/* Pin 35 connected to ASET */
-		gpio35-pins {
-			pins = "gpio35";
-			function = "normal";
-			output-high;
-			bias-disable;
-			power-source = <PM8058_GPIO_S3>;
-		};
-	};
-	dragon_veth_gpios: veth-state {
-		pinconf {
-			pins = "gpio40";
-			function = "normal";
-			bias-disable;
-			drive-push-pull;
-		};
-	};
-};
-
-&pm8058_keypad {
-	linux,keymap = <
-		MATRIX_KEY(0, 0, KEY_MENU)
-		MATRIX_KEY(0, 2, KEY_1)
-		MATRIX_KEY(0, 3, KEY_4)
-		MATRIX_KEY(0, 4, KEY_7)
-		MATRIX_KEY(1, 0, KEY_UP)
-		MATRIX_KEY(1, 1, KEY_LEFT)
-		MATRIX_KEY(1, 2, KEY_DOWN)
-		MATRIX_KEY(1, 3, KEY_5)
-		MATRIX_KEY(1, 3, KEY_8)
-		MATRIX_KEY(2, 0, KEY_HOME)
-		MATRIX_KEY(2, 1, KEY_REPLY)
-		MATRIX_KEY(2, 2, KEY_2)
-		MATRIX_KEY(2, 3, KEY_6)
-		MATRIX_KEY(3, 0, KEY_VOLUMEUP)
-		MATRIX_KEY(3, 1, KEY_RIGHT)
-		MATRIX_KEY(3, 2, KEY_3)
-		MATRIX_KEY(3, 3, KEY_9)
-		MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE)
-		MATRIX_KEY(4, 0, KEY_VOLUMEDOWN)
-		MATRIX_KEY(4, 1, KEY_BACK)
-		MATRIX_KEY(4, 2, KEY_CAMERA)
-		MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
-	>;
-	keypad,num-rows = <6>;
-	keypad,num-columns = <5>;
-};
-
-&pm8058_led48 {
-	/*
-	 * The keypad LED @0x48 is routed to
-	 * the sensor board where it is
-	 * connected to an infrared LED
-	 * SFH4650 (60mW, @850nm) next to the
-	 * ambient light and proximity sensor
-	 * Capella Microsystems CM3605.
-	 */
-	label = "pm8058:infrared:proximitysensor";
-	default-state = "off";
-	linux,default-trigger = "cm3605";
-	status = "okay";
-};
-
-&pm8058_led131 {
-	label = "pm8058:red";
-	color = <LED_COLOR_ID_RED>;
-	default-state = "off";
-	status = "okay";
-};
-
-&pm8058_led132 {
-	/*
-	 * This is actually green too on my
-	 * board, but documented as yellow.
-	 */
-	label = "pm8058:yellow";
-	color = <LED_COLOR_ID_YELLOW>;
-	default-state = "off";
-	linux,default-trigger = "mmc0";
-	status = "okay";
-};
-
-&pm8058_led133 {
-	label = "pm8058:green";
-	function = LED_FUNCTION_HEARTBEAT;
-	color = <LED_COLOR_ID_GREEN>;
-	default-state = "on";
-	linux,default-trigger = "heartbeat";
-	status = "okay";
-};
-
-&pm8058_mpps {
-	dragon_cm3605_mpps: cm3605-mpps-state {
-		pins = "mpp5";
-		function = "analog";
-		input-enable;
-		bias-high-impedance;
-		/* Let's use channel 5 */
-		qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
-		power-source = <PM8058_GPIO_S3>;
-	};
-};
-
-&rpm {
-	/*
-	 * Set up of the PMIC RPM regulators for this board
-	 * PM8901 supplies "preliminary regulators" whatever
-	 * that means
-	 */
-	regulators-0 {
-		vdd_l0-supply = <&pm8901_s4>;
-		vdd_l1-supply = <&vph>;
-		vdd_l2-supply = <&vph>;
-		vdd_l3-supply = <&vph>;
-		vdd_l4-supply = <&vph>;
-		vdd_l5-supply = <&vph>;
-		vdd_l6-supply = <&vph>;
-		/* vdd_s0-supply, vdd_s1-supply: SAW regulators */
-		vdd_s2-supply = <&vph>;
-		vdd_s3-supply = <&vph>;
-		vdd_s4-supply = <&vph>;
-		lvs0_in-supply = <&pm8058_s3>;
-		lvs1_in-supply = <&pm8901_s4>;
-		lvs2_in-supply = <&pm8058_l0>;
-		lvs3_in-supply = <&pm8058_s2>;
-		mvs_in-supply = <&pm8058_s3>;
-
-		l0 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-		};
-		l1 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			bias-pull-down;
-		};
-		l2 {
-			/* TMA340 requires strictly 3.3V */
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			bias-pull-down;
-		};
-		l3 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			bias-pull-down;
-		};
-		l4 {
-			regulator-min-microvolt = <2600000>;
-			regulator-max-microvolt = <2600000>;
-			bias-pull-down;
-		};
-		l5 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-			bias-pull-down;
-		};
-		l6 {
-			regulator-min-microvolt = <2200000>;
-			regulator-max-microvolt = <2200000>;
-			bias-pull-down;
-		};
-
-		/* s0 and s1 are SAW regulators controlled over SPM */
-		s2 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			qcom,switch-mode-frequency = <1600000>;
-			bias-pull-down;
-		};
-		s3 {
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-			qcom,switch-mode-frequency = <1600000>;
-			bias-pull-down;
-		};
-		s4 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-			qcom,switch-mode-frequency = <1600000>;
-			bias-pull-down;
-		};
-
-		/* LVS0 thru 3 and mvs are just switches */
-		lvs0 {
-			regulator-always-on;
-		};
-		lvs1 { };
-		lvs2 { };
-		lvs3 { };
-		mvs { };
-
-	};
-
-	regulators-1 {
-		vdd_l0_l1_lvs-supply = <&pm8058_s3>;
-		vdd_l2_l11_l12-supply = <&vph>;
-		vdd_l3_l4_l5-supply = <&vph>;
-		vdd_l6_l7-supply = <&vph>;
-		vdd_l8-supply = <&vph>;
-		vdd_l9-supply = <&vph>;
-		vdd_l10-supply = <&vph>;
-		vdd_l13_l16-supply = <&pm8058_s4>;
-		vdd_l14_l15-supply = <&vph>;
-		vdd_l17_l18-supply = <&vph>;
-		vdd_l19_l20-supply = <&vph>;
-		vdd_l21-supply = <&pm8058_s3>;
-		vdd_l22-supply = <&pm8058_s3>;
-		vdd_l23_l24_l25-supply = <&pm8058_s3>;
-		vdd_s0-supply = <&vph>;
-		vdd_s1-supply = <&vph>;
-		vdd_s2-supply = <&vph>;
-		vdd_s3-supply = <&vph>;
-		vdd_s4-supply = <&vph>;
-		vdd_ncp-supply = <&vph>;
-
-		l0 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-		};
-		l1 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-		};
-		l2 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2600000>;
-			bias-pull-down;
-		};
-		l3 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-		l4 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-			bias-pull-down;
-		};
-		l5 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-			bias-pull-down;
-		};
-		l6 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3600000>;
-			bias-pull-down;
-		};
-		l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-		l8 {
-			regulator-min-microvolt = <2900000>;
-			regulator-max-microvolt = <3050000>;
-			bias-pull-down;
-		};
-		l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-		l10 {
-			regulator-min-microvolt = <2600000>;
-			regulator-max-microvolt = <2600000>;
-			bias-pull-down;
-		};
-		l11 {
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			bias-pull-down;
-		};
-		l12 {
-			regulator-min-microvolt = <2900000>;
-			regulator-max-microvolt = <2900000>;
-			bias-pull-down;
-		};
-		l13 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-			bias-pull-down;
-		};
-		l14 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-		l15 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-			bias-pull-down;
-		};
-		l16 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-			regulator-always-on;
-		};
-		l17 {
-			// 1.5V according to schematic
-			regulator-min-microvolt = <2600000>;
-			regulator-max-microvolt = <2600000>;
-			bias-pull-down;
-		};
-		l18 {
-			regulator-min-microvolt = <2200000>;
-			regulator-max-microvolt = <2200000>;
-			bias-pull-down;
-		};
-		l19 {
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			bias-pull-down;
-		};
-		l20 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			bias-pull-down;
-		};
-		l21 {
-			// 1.1 V according to schematic
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-			regulator-always-on;
-		};
-		l22 {
-			// 1.2 V according to schematic
-			regulator-min-microvolt = <1150000>;
-			regulator-max-microvolt = <1150000>;
-			bias-pull-down;
-		};
-		l23 {
-			// Unused
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-		};
-		l24 {
-			// Unused
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-		};
-		l25 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			bias-pull-down;
-		};
-
-		s0 {
-			// regulator-min-microvolt = <500000>;
-			// regulator-max-microvolt = <1325000>;
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-			qcom,switch-mode-frequency = <1600000>;
-			bias-pull-down;
-		};
-		s1 {
-			// regulator-min-microvolt = <500000>;
-			// regulator-max-microvolt = <1250000>;
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-			qcom,switch-mode-frequency = <1600000>;
-			bias-pull-down;
-		};
-		s2 {
-			// 1.3 V according to schematic
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1400000>;
-			qcom,switch-mode-frequency = <1600000>;
-			bias-pull-down;
-		};
-		s3 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			qcom,switch-mode-frequency = <1600000>;
-			regulator-always-on;
-			bias-pull-down;
-		};
-		s4 {
-			regulator-min-microvolt = <2200000>;
-			regulator-max-microvolt = <2200000>;
-			qcom,switch-mode-frequency = <1600000>;
-			regulator-always-on;
-			bias-pull-down;
-		};
-
-		/* LVS0 and LVS1 are just switches */
-		lvs0 {
-			bias-pull-down;
-		};
-		lvs1 {
-			bias-pull-down;
-		};
-
-		ncp {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			qcom,switch-mode-frequency = <1600000>;
-		};
-	};
-};
-
-/* Internal 3.69 GiB eMMC */
-&sdcc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dragon_sdcc1_pins>;
-	vmmc-supply = <&pm8901_l5>;
-	vqmmc-supply = <&pm8901_lvs0>;
-	status = "okay";
-};
-
-/* External micro SD card, directly connected, pulled up to 2.85 V */
-&sdcc3 {
-	/* Enable SSBI GPIO 22 as input, use for card detect */
-	pinctrl-names = "default";
-	pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>;
-	cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&pm8058_l14>;
-	status = "okay";
-};
-
-/*
- * Second external micro SD card, using two TXB104RGYR levelshifters
- * to lift from 1.8 V to 2.85 V
- */
-&sdcc5 {
-	/* Enable SSBI GPIO 26 as input, use for card detect */
-	pinctrl-names = "default";
-	pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>;
-	cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&pm8058_l14>;
-	vqmmc-supply = <&dragon_vio_txb>;
-	status = "okay";
-};
-
-&tlmm {
-	/* eMMC pins, all 8 data lines connected */
-	dragon_sdcc1_pins: sdcc1-state {
-		clk-pins {
-			pins = "gpio167"; /* SDC1 CLK */
-			function = "sdc1";
-			drive-strength = <16>;
-			bias-disable;
-		};
-		cmd-pins {
-			pins = "gpio168"; /* SDC1 CMD */
-			function = "sdc1";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-		data-pins {
-			/* SDC1 D0 to D7 */
-			pins = "gpio159", "gpio160", "gpio161", "gpio162",
-			     "gpio163", "gpio164", "gpio165", "gpio166";
-			function = "sdc1";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-
-	/*
-	 * The SDCC3 pins are hardcoded (non-muxable) but need some pin
-	 * configuration.
-	 */
-	dragon_sdcc3_pins: sdcc3-state {
-		clk-pins {
-			pins = "sdc3_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		cmd-pins {
-			pins = "sdc3_cmd";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		data-pins {
-			pins = "sdc3_data";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	/* Second SD card slot pins */
-	dragon_sdcc5_pins: sdcc5-state {
-		clk-pins {
-			pins = "gpio97"; /* SDC5 CLK */
-			function = "sdc5";
-			drive-strength = <16>;
-			bias-disable;
-		};
-		cmd-pins {
-			pins = "gpio95"; /* SDC5 CMD */
-			function = "sdc5";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-		data-pins {
-			/* SDC5 D0 to D3 */
-			pins = "gpio96", "gpio98", "gpio99", "gpio100";
-			function = "sdc5";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-
-	dragon_gsbi3_i2c_pins: gsbi3-i2c-state {
-		pins = "gpio43", "gpio44";
-		function = "gsbi3";
-		drive-strength = <8>;
-		/* These have external pull-up 2.2kOhm to 1.8V */
-		bias-disable;
-	};
-
-	dragon_gsbi8_i2c_pins: gsbi8-i2c-state {
-		pins = "gpio64", "gpio65";
-		function = "gsbi8";
-		drive-strength = <16>;
-		/* These have external pull-up 2.2kOhm to 1.8V */
-		bias-disable;
-	};
-
-	dragon_gsbi12_i2c_pins: gsbi12-i2c-state {
-		pins = "gpio115", "gpio116";
-		function = "gsbi12";
-		drive-strength = <16>;
-		/* These have external pull-up 4.7kOhm to 1.8V */
-		bias-disable;
-	};
-
-	/* Primary serial port uart 0 pins */
-	dragon_gsbi12_serial_pins: gsbi12-serial-state {
-		tx-pins {
-			pins = "gpio117";
-			function = "gsbi12";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		rx-pins {
-			pins = "gpio118";
-			function = "gsbi12";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	dragon_ebi2_pins: ebi2-state {
-		/*
-		 * Pins used by EBI2 on the Dragonboard, actually only
-		 * CS2 is used by a real peripheral. CS0 is just
-		 * routed to a test point.
-		 */
-		mux0-pins {
-			pins =
-			    /* "gpio39", CS1A_N this is not good to mux */
-			    "gpio40", /* CS2A_N */
-			    "gpio134"; /* CS0_N testpoint TP29 */
-			function = "ebi2cs";
-		};
-		mux1-pins {
-			pins =
-			    /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
-			    "gpio123", "gpio124", "gpio125", "gpio126",
-			    "gpio127", "gpio128", "gpio129", "gpio130",
-			    /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */
-			    "gpio135", "gpio136", "gpio137", "gpio138",
-			    "gpio139", "gpio140", "gpio141", "gpio142",
-			    "gpio143", "gpio144", "gpio145", "gpio146",
-			    "gpio147", "gpio148", "gpio149", "gpio150",
-			    "gpio151", /* EBI2_OE_N */
-			    "gpio153", /* EBI2_ADV */
-			    "gpio157"; /* EBI2_WE_N */
-			function = "ebi2";
-		};
-	};
-
-	/* Interrupt line for the KXSD9 accelerometer */
-	dragon_kxsd9_gpios: kxsd9-state {
-		pins = "gpio57"; /* IRQ line */
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	dragon_tma340_gpios: tma340-state {
-		reset-pins {
-			/* RESET line, TS_ATTN, WAKE_CTP */
-			pins = "gpio58";
-			function = "gpio";
-			drive-strength = <6>;
-			bias-disable;
-		};
-		irq-pins {
-			pins = "gpio61"; /* IRQ line */
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
-
-&xoadc {
-	/* Reference voltage 2.2 V */
-	xoadc-ref-supply = <&pm8058_l18>;
-
-	/* Board-specific channels */
-	mpp5@5 {
-		/* Connected to AOUT of ALS sensor */
-		reg = <0x00 0x05>;
-	};
-	mpp6@6 {
-		/* Connected to test point TP43 */
-		reg = <0x00 0x06>;
-	};
-	mpp7@7 {
-		/* Connected to battery thermistor */
-		reg = <0x00 0x07>;
-	};
-	mpp8@8 {
-		/* Connected to battery ID detector */
-		reg = <0x00 0x08>;
-	};
-	mpp9@9 {
-		/* Connected to XO thermistor */
-		reg = <0x00 0x09>;
-	};
-};