ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 329 deletions

diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
deleted file mode 100644
index c105932f642e..000000000000
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ /dev/null
@@ -1,329 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the iWave-RZG1E SODIMM carrier board
- *
- * Copyright (C) 2017 Renesas Electronics Corp.
- */
-
-/*
- * SSI-SGTL5000
- *
- * This command is required when Playback/Capture
- *
- *      amixer set "DVC Out" 100%
- *      amixer set "DVC In" 100%
- *
- * You can use Mute
- *
- *      amixer set "DVC Out Mute" on
- *      amixer set "DVC In Mute" on
- *
- * You can use Volume Ramp
- *
- *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
- *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
- *      amixer set "DVC Out Ramp" on
- *      aplay xxx.wav &
- *      amixer set "DVC Out"  80%  // Volume Down
- *      amixer set "DVC Out" 100%  // Volume Up
- */
-
-/dts-v1/;
-#include "r8a7745-iwg22m.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "iWave Systems RainboW-G22D-SODIMM board based on RZ/G1E";
-	compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745";
-
-	aliases {
-		ethernet0 = &avb;
-		serial3 = &scif4;
-		serial5 = &hscif1;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial3:115200n8";
-	};
-
-	audio_clock: audio_clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	backlight_lcd: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-
-	lcd_panel: lcd {
-		compatible = "edt,etm043080dh6gp";
-		power-supply = <&vccq_panel>;
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&du_out_rgb0>;
-			};
-		};
-	};
-
-	vccq_panel: regulator-vccq-panel {
-		compatible = "regulator-fixed";
-		regulator-name = "Panel VccQ";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator-vccq-sdhi0 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	rsnd_sgtl5000: sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sndcodec>;
-		simple-audio-card,frame-master = <&sndcodec>;
-
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-		};
-	};
-};
-
-&avb {
-	pinctrl-0 = <&avb_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy3>;
-	phy-mode = "gmii";
-	renesas,no-ether-link;
-	status = "okay";
-
-	phy3: ethernet-phy@3 {
-	/*
-	 * On some older versions of the platform (before R4.0) the phy address
-	 * may be 1 or 3. The address is fixed to 3 for R4.0 onwards.
-	 */
-		compatible = "ethernet-phy-id0022.1622",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <3>;
-		micrel,led-mode = <1>;
-	};
-};
-
-&can0 {
-	pinctrl-0 = <&can0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&du {
-	pinctrl-0 = <&du0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&lcd_in>;
-			};
-		};
-	};
-};
-
-&hscif1 {
-	pinctrl-0 = <&hscif1_pins>;
-	pinctrl-names = "default";
-
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&hsusb {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&i2c5 {
-	pinctrl-0 = <&i2c5_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		clocks = <&audio_clock>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	stmpe811@44 {
-		compatible = "st,stmpe811";
-		reg = <0x44>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-
-		/* 3.25 MHz ADC clock speed */
-		st,adc-freq = <1>;
-		/* ADC conversion time: 80 clocks */
-		st,sample-time = <4>;
-		/* 12-bit ADC */
-		st,mod-12b = <1>;
-		/* internal ADC reference */
-		st,ref-sel = <0>;
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			/* 8 sample average control */
-			st,ave-ctrl = <3>;
-			/* 7 length fractional part in z */
-			st,fraction-z = <7>;
-			/*
-			 * 50 mA typical 80 mA max touchscreen drivers
-			 * current limit value
-			 */
-			st,i-drive = <1>;
-			/* 1 ms panel driver settling time */
-			st,settling = <3>;
-			/* 5 ms touch detect interrupt delay */
-			st,touch-det-delay = <5>;
-		};
-	};
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&pfc {
-	avb_pins: avb {
-		groups = "avb_mdio", "avb_gmii";
-		function = "avb";
-	};
-
-	backlight_pins: backlight {
-		groups = "tpu_to3_c";
-		function = "tpu";
-	};
-
-	can0_pins: can0 {
-		groups = "can0_data";
-		function = "can0";
-	};
-
-	du0_pins: du0 {
-		groups = "du0_rgb666", "du0_sync", "du0_disp", "du0_clk0_out";
-		function = "du0";
-	};
-
-	hscif1_pins: hscif1 {
-		groups = "hscif1_data", "hscif1_ctrl";
-		function = "hscif1";
-	};
-
-	i2c5_pins: i2c5 {
-		groups = "i2c5_b";
-		function = "i2c5";
-	};
-
-	scif4_pins: scif4 {
-		groups = "scif4_data_b";
-		function = "scif4";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <3300>;
-	};
-
-	sound_pins: sound {
-		groups = "ssi34_ctrl", "ssi3_data", "ssi4_data";
-		function = "ssi";
-	};
-
-	usb0_pins: usb0 {
-		groups = "usb0";
-		function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		groups = "usb1";
-		function = "usb1";
-	};
-};
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	/* Single DAI */
-
-	#sound-dai-cells = <0>;
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi3>, <&src3>, <&dvc0>;
-			capture = <&ssi4>, <&src4>, <&dvc1>;
-		};
-	};
-};
-
-&scif4 {
-	pinctrl-0 = <&scif4_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ssi4 {
-	shared-pin;
-};
-
-&tpu {
-	pinctrl-0 = <&backlight_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};