ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 578 deletions

diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
deleted file mode 100644
index b7af1befa126..000000000000
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ /dev/null
@@ -1,578 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the SILK board
- *
- * Copyright (C) 2014 Renesas Electronics Corporation
- * Copyright (C) 2014-2015 Renesas Solutions Corp.
- * Copyright (C) 2014-2015 Cogent Embedded, Inc.
- */
-
-/*
- * SSI-AK4643
- *
- * SW1: 2-1: AK4643
- *      2-3: ADV7511
- *
- * This command is required before playback/capture:
- *
- *	amixer set "LINEOUT Mixer DACL" on
- */
-
-/dts-v1/;
-#include "r8a7794.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "SILK";
-	compatible = "renesas,silk", "renesas,r8a7794";
-
-	aliases {
-		serial0 = &scif2;
-		i2c9 = &gpioi2c1;
-		i2c10 = &i2chdmi;
-		mmc0 = &mmcif0;
-		mmc1 = &sdhi1;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	keyboard {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&keyboard_pins>;
-		pinctrl-names = "default";
-
-		key-3 {
-			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_3>;
-			label = "SW3";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-4 {
-			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_4>;
-			label = "SW4";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-6 {
-			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_6>;
-			label = "SW6";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-a {
-			gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_A>;
-			label = "SW12-1";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-b {
-			gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_B>;
-			label = "SW12-2";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-c {
-			gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_C>;
-			label = "SW12-3";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-d {
-			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_D>;
-			label = "SW12-4";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-	};
-
-	d3_3v: regulator-d3-3v {
-		compatible = "regulator-fixed";
-		regulator-name = "D3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcc_sdhi1: regulator-vcc-sdhi1 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI1 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi1: regulator-vccq-sdhi1 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI1 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	vga-encoder {
-		compatible = "adi,adv7123";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7123_in: endpoint {
-					remote-endpoint = <&du_out_rgb1>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				adv7123_out: endpoint {
-					remote-endpoint = <&vga_in>;
-				};
-			};
-		};
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con: endpoint {
-				remote-endpoint = <&adv7511_out>;
-			};
-		};
-	};
-
-	vga {
-		compatible = "vga-connector";
-
-		port {
-			vga_in: endpoint {
-				remote-endpoint = <&adv7123_out>;
-			};
-		};
-	};
-
-	x2_clk: x2-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <148500000>;
-	};
-
-	x3_clk: x3-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <74250000>;
-	};
-
-	x9_clk: audio_clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12288000>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,format = "left_j";
-		simple-audio-card,bitclock-master = <&soundcodec>;
-		simple-audio-card,frame-master = <&soundcodec>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-
-		soundcodec: simple-audio-card,codec {
-			sound-dai = <&ak4643>;
-			clocks = <&x9_clk>;
-		};
-	};
-
-	gpioi2c1: i2c-9 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		status = "disabled";
-		scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	/*
-	 * A fallback to GPIO is provided for I2C1.
-	 */
-	i2chdmi: i2c-10 {
-		compatible = "i2c-demux-pinctrl";
-		i2c-parent = <&i2c1>, <&gpioi2c1>;
-		i2c-bus-name = "i2c-hdmi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ak4643: codec@12 {
-			compatible = "asahi-kasei,ak4643";
-			#sound-dai-cells = <0>;
-			reg = <0x12>;
-		};
-
-		composite-in@20 {
-			compatible = "adi,adv7180";
-			reg = <0x20>;
-
-			port {
-				adv7180: endpoint {
-					bus-width = <8>;
-					remote-endpoint = <&vin0ep>;
-				};
-			};
-		};
-
-		hdmi@39 {
-			compatible = "adi,adv7511w";
-			reg = <0x39>;
-			interrupt-parent = <&gpio5>;
-			interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
-
-			adi,input-depth = <8>;
-			adi,input-colorspace = "rgb";
-			adi,input-clock = "1x";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					adv7511_in: endpoint {
-						remote-endpoint = <&du_out_rgb0>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					adv7511_out: endpoint {
-						remote-endpoint = <&hdmi_con>;
-					};
-				};
-			};
-		};
-
-		eeprom@50 {
-			compatible = "renesas,r1ex24002", "atmel,24c02";
-			reg = <0x50>;
-			pagesize = <16>;
-		};
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
-	scif2_pins: scif2 {
-		groups = "scif2_data";
-		function = "scif2";
-	};
-
-	scif_clk_pins: scif_clk {
-		groups = "scif_clk";
-		function = "scif_clk";
-	};
-
-	ether_pins: ether {
-		groups = "eth_link", "eth_mdio", "eth_rmii";
-		function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		groups = "intc_irq8";
-		function = "intc";
-	};
-
-	i2c1_pins: i2c1 {
-		groups = "i2c1";
-		function = "i2c1";
-	};
-
-	mmcif0_pins: mmcif0 {
-		groups = "mmc_data8", "mmc_ctrl";
-		function = "mmc";
-	};
-
-	sdhi1_pins: sd1 {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-	};
-
-	qspi_pins: qspi {
-		groups = "qspi_ctrl", "qspi_data4";
-		function = "qspi";
-	};
-
-	vin0_pins: vin0 {
-		groups = "vin0_data8", "vin0_clk";
-		function = "vin0";
-	};
-
-	usb0_pins: usb0 {
-		groups = "usb0";
-		function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		groups = "usb1";
-		function = "usb1";
-	};
-
-	du0_pins: du0 {
-		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
-		function = "du0";
-	};
-
-	du1_pins: du1 {
-		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
-		function = "du1";
-	};
-
-	keyboard_pins: keyboard {
-		pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12";
-		bias-pull-up;
-	};
-
-	ssi_pins: sound {
-		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
-		function = "ssi";
-	};
-
-	audio_clk_pins: audio_clk {
-		groups = "audio_clkc";
-		function = "audio_clk";
-	};
-};
-
-&scif2 {
-	pinctrl-0 = <&scif2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif_clk {
-	clock-frequency = <14745600>;
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-id0022.1537",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&i2c1 {
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "i2c-hdmi";
-
-	clock-frequency = <400000>;
-};
-
-&i2c7 {
-	status = "okay";
-	clock-frequency = <100000>;
-
-	pmic@58 {
-		compatible = "dlg,da9063";
-		reg = <0x58>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		onkey {
-			compatible = "dlg,da9063-onkey";
-		};
-
-		rtc {
-			compatible = "dlg,da9063-rtc";
-		};
-
-		watchdog {
-			compatible = "dlg,da9063-watchdog";
-		};
-	};
-};
-
-&mmcif0 {
-	pinctrl-0 = <&mmcif0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&d3_3v>;
-	vqmmc-supply = <&d3_3v>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&sdhi1 {
-	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi1>;
-	vqmmc-supply = <&vccq_sdhi1>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash@0 {
-		compatible = "spansion,s25fl512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		spi-cpol;
-		spi-cpha;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "loader";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "user";
-				reg = <0x00040000 0x00400000>;
-				read-only;
-			};
-			partition@440000 {
-				label = "flash";
-				reg = <0x00440000 0x03bc0000>;
-			};
-		};
-	};
-};
-
-/* composite video input */
-&vin0 {
-	status = "okay";
-	pinctrl-0 = <&vin0_pins>;
-	pinctrl-names = "default";
-
-	port {
-		vin0ep: endpoint {
-			remote-endpoint = <&adv7180>;
-			bus-width = <8>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&du {
-	pinctrl-0 = <&du0_pins>, <&du1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
-		 <&x2_clk>, <&x3_clk>;
-	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&adv7511_in>;
-			};
-		};
-		port@1 {
-			endpoint {
-				remote-endpoint = <&adv7123_in>;
-			};
-		};
-	};
-};
-
-&rcar_sound {
-	pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi0>;
-			capture  = <&ssi1>;
-		};
-	};
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&ssi1 {
-	shared-pin;
-};