ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 573 deletions

diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
deleted file mode 100644
index 3836c61cfb76..000000000000
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ /dev/null
@@ -1,573 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
- */
-
-#include <dt-bindings/input/input.h>
-#include "rk3288.dtsi"
-
-/ {
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x80000000>;
-	};
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 1>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1800000>;
-
-		button-recovery {
-			label = "Recovery";
-			linux,code = <KEY_VENDOR>;
-			press-threshold-microvolt = <0>;
-		};
-	};
-
-	dovdd_1v8: dovdd-1v8-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "dovdd_1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc28_dvp>;
-	};
-
-	ext_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-		clock-output-names = "ext_gmac";
-	};
-
-	ir: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ir_int>;
-	};
-
-	keys: gpio-keys {
-		compatible = "gpio-keys";
-
-		key-power {
-			wakeup-source;
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "GPIO Power";
-			linux,code = <KEY_POWER>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pwr_key>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		work_led: led-0 {
-			gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
-			label = "firefly:blue:user";
-			linux,default-trigger = "rc-feedback";
-			pinctrl-names = "default";
-			pinctrl-0 = <&work_led_pin>;
-		};
-
-		power_led: led-1 {
-			gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
-			label = "firefly:green:power";
-			linux,default-trigger = "default-on";
-			pinctrl-names = "default";
-			pinctrl-0 = <&power_led_pin>;
-		};
-	};
-
-	vbat_wl: vcc_sys: vsys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_sys";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_sd: sdmmc-regulator {
-		compatible = "regulator-fixed";
-		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc_pwr>;
-		regulator-name = "vcc_sd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <100000>;
-		vin-supply = <&vcc_io>;
-	};
-
-	vcc_flash: flash-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_flash";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_io>;
-	};
-
-	vcc_5v: usb-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc_sys>;
-	};
-
-	vcc_host_5v: usb-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&host_vbus_drv>;
-		regulator-name = "vcc_host_5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&vcc_5v>;
-	};
-
-	vcc_otg_5v: usb-otg-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&otg_vbus_drv>;
-		regulator-name = "vcc_otg_5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&vcc_5v>;
-	};
-
-	/*
-	 * A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled
-	 * by the dvp_pwr pin.
-	 */
-	vcc28_dvp: vcc28-dvp-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dvp_pwr>;
-		regulator-name = "vcc28_dvp";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		regulator-always-on;
-		vin-supply = <&vcc_io>;
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_cpu>;
-};
-
-&emmc {
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	disable-wp;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
-	vmmc-supply = <&vcc_io>;
-	vqmmc-supply = <&vcc_flash>;
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_MAC>;
-	assigned-clock-parents = <&ext_gmac>;
-	clock_in_out = "input";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
-	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 1000000>;
-	snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
-	tx_delay = <0x30>;
-	rx_delay = <0x10>;
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c5>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	vdd_cpu: syr827@40 {
-		compatible = "silergy,syr827";
-		fcs,suspend-voltage-selector = <1>;
-		reg = <0x40>;
-		regulator-name = "vdd_cpu";
-		regulator-min-microvolt = <850000>;
-		regulator-max-microvolt = <1350000>;
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-enable-ramp-delay = <300>;
-		regulator-ramp-delay = <8000>;
-		vin-supply = <&vcc_sys>;
-	};
-
-	vdd_gpu: syr828@41 {
-		compatible = "silergy,syr828";
-		fcs,suspend-voltage-selector = <1>;
-		reg = <0x41>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <850000>;
-		regulator-max-microvolt = <1350000>;
-		regulator-always-on;
-		vin-supply = <&vcc_sys>;
-	};
-
-	hym8563: rtc@51 {
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-		#clock-cells = <0>;
-		clock-output-names = "xin32k";
-		interrupt-parent = <&gpio7>;
-		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&rtc_int>;
-	};
-
-	act8846: act8846@5a {
-		compatible = "active-semi,act8846";
-		reg = <0x5a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
-		system-power-controller;
-
-		vp1-supply = <&vcc_sys>;
-		vp2-supply = <&vcc_sys>;
-		vp3-supply = <&vcc_sys>;
-		vp4-supply = <&vcc_sys>;
-		inl1-supply = <&vcc_sys>;
-		inl2-supply = <&vcc_sys>;
-		inl3-supply = <&vcc_20>;
-
-		regulators {
-			vcc_ddr: REG1 {
-				regulator-name = "vcc_ddr";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vcc_io: REG2 {
-				regulator-name = "vcc_io";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_log: REG3 {
-				regulator-name = "vdd_log";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			vcc_20: REG4 {
-				regulator-name = "vcc_20";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			vccio_sd: REG5 {
-				regulator-name = "vccio_sd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd10_lcd: REG6 {
-				regulator-name = "vdd10_lcd";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			vcca_18: REG7 {
-				regulator-name = "vcca_18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vcca_33: REG8 {
-				regulator-name = "vcca_33";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vcc_lan: REG9 {
-				regulator-name = "vcc_lan";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vdd_10: REG10 {
-				regulator-name = "vdd_10";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			vccio_wl: vcc_18: REG11 {
-				regulator-name = "vcc_18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vcc18_lcd: REG12 {
-				regulator-name = "vcc18_lcd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&io_domains {
-	status = "okay";
-
-	audio-supply = <&vcca_33>;
-	bb-supply = <&vcc_io>;
-	dvp-supply = <&dovdd_1v8>;
-	flash0-supply = <&vcc_flash>;
-	flash1-supply = <&vcc_lan>;
-	gpio30-supply = <&vcc_io>;
-	gpio1830-supply = <&vcc_io>;
-	lcdc-supply = <&vcc_io>;
-	sdcard-supply = <&vccio_sd>;
-	wifi-supply = <&vccio_wl>;
-};
-
-&pinctrl {
-	pcfg_output_high: pcfg-output-high {
-		output-high;
-	};
-
-	pcfg_output_low: pcfg-output-low {
-		output-low;
-	};
-
-	pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
-		bias-pull-up;
-		drive-strength = <12>;
-	};
-
-	act8846 {
-		pwr_hold: pwr-hold {
-			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>;
-		};
-	};
-
-	dvp {
-		dvp_pwr: dvp-pwr {
-			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	gmac {
-		phy_int: phy-int {
-			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		phy_pmeb: phy-pmeb {
-			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		phy_rst: phy-rst {
-			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
-		};
-	};
-
-	hym8563 {
-		rtc_int: rtc-int {
-			rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	keys {
-		pwr_key: pwr-key {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	leds {
-		power_led_pin: power-led-pin {
-			rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		work_led_pin: work-led-pin {
-			rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	sdmmc {
-		/*
-		 * Default drive strength isn't enough to achieve even
-		 * high-speed mode on firefly board so bump up to 12ma.
-		 */
-		sdmmc_bus4: sdmmc-bus4 {
-			rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>,
-					<6 RK_PC1 1 &pcfg_pull_up_drv_12ma>,
-					<6 RK_PC2 1 &pcfg_pull_up_drv_12ma>,
-					<6 RK_PC3 1 &pcfg_pull_up_drv_12ma>;
-		};
-
-		sdmmc_clk: sdmmc-clk {
-			rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>;
-		};
-
-		sdmmc_cmd: sdmmc-cmd {
-			rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>;
-		};
-
-		sdmmc_pwr: sdmmc-pwr {
-			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb_host {
-		host_vbus_drv: host-vbus-drv {
-			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		usbhub_rst: usbhub-rst {
-			rockchip,pins = <8 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>;
-		};
-	};
-
-	usb_otg {
-		otg_vbus_drv: otg-vbus-drv {
-			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&saradc {
-	vref-supply = <&vcc_18>;
-	status = "okay";
-};
-
-&sdio0 {
-	bus-width = <4>;
-	disable-wp;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
-	vmmc-supply = <&vbat_wl>;
-	vqmmc-supply = <&vccio_wl>;
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	disable-wp;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
-	vmmc-supply = <&vcc_sd>;
-	vqmmc-supply = <&vccio_sd>;
-	status = "okay";
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>;
-	status = "okay";
-};
-
-&tsadc {
-	rockchip,hw-tshut-mode = <0>;
-	rockchip,hw-tshut-polarity = <0>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&usb_host1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usbhub_rst>;
-	status = "okay";
-};
-
-&usb_otg {
-	status = "okay";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};