ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 377 deletions

diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
deleted file mode 100644
index e66fa59c2de6..000000000000
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ /dev/null
@@ -1,377 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 ST-Ericsson AB
- */
-
-#include "ste-href-ab8500.dtsi"
-#include "ste-href.dtsi"
-
-/ {
-	model = "ST-Ericsson HREF (v60+) platform with Device Tree";
-	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
-
-	thermal-zones {
-		chassis-thermal {
-			/* Poll every 20 seconds */
-			polling-delay = <20000>;
-			/* Poll every 2nd second when cooling */
-			polling-delay-passive = <2000>;
-
-			thermal-sensors = <&therm1>, <&therm2>;
-
-			/* Tripping points made from rough guess about operating conditions */
-			trips {
-				chassis_alert: chassis-alert {
-					/* At 50 degrees take down the CPU frequency */
-					temperature = <50000>;
-					hysteresis = <3000>;
-					type = "active";
-				};
-				chassis_crit: chassis-crit {
-					/* Just shut down at 70 degrees */
-					temperature = <70000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			/* Push down the operating frequency of the SoC when it gets hot */
-			cooling-maps {
-				map0 {
-					trip = <&chassis_alert>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-					contribution = <100>;
-				};
-			};
-		};
-	};
-
-	/*
-	 * Thermistors on the board, formally to monitor battery temperatures
-	 * but what they measure is the board temperature.
-	 */
-	therm1: thermistor@0 {
-		compatible = "murata,ncp18wb473";
-		io-channels = <&gpadc 0x06>; /* AUX1 */
-		pullup-uv = <1800000>;
-		pullup-ohm = <220000>;
-		pulldown-ohm = <0>;
-		#thermal-sensor-cells = <0>;
-	};
-
-	therm2: thermistor@1 {
-		compatible = "murata,ncp18wb473";
-		io-channels = <&gpadc 0x07>; /* AUX2 */
-		pullup-uv = <1800000>;
-		pullup-ohm = <220000>;
-		pulldown-ohm = <0>;
-		#thermal-sensor-cells = <0>;
-	};
-
-	soc {
-		/* Name the GPIO muxed rails on the HREF boards */
-		gpio@8012e000 {
-			/* GPIOs 0 - 31 */
-			gpio-line-names =
-				     /* GPIO0,1 used for UART0 BT RX/TX */
-				     "", "",
-				     "UART_WAKE",
-				     "BT_WAKE",
-				     "",
-				     "SDMMC_1V8_3V_SEL",
-				     "FLASH_LED_SYNC (FLASH_CTRL_0)",
-				     "XENON_READY (FLASH_CTRL_1)",
-				     "", "", "", "", "", "", "", "",
-				     "", "", "", "",
-				     "",
-				     "FLASH_LED_EN (FLASH_CTRL_3)",
-				     "", "",
-				     "", "", "", "", "",
-				     /* Used by UART2 (console) */
-				     "", "",
-				     "MAGNETOMETER_INT";
-		};
-
-		gpio@8012e080 {
-			/* GPIOs 32 - 63 */
-			gpio-line-names =
-				     "MAGNETOMETER_DRDY",
-				     "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "";
-		};
-
-		gpio@8000e000 {
-			/* GPIOs 64 - 95 */
-			gpio-line-names = "XENON_EN2 (FLASH_CTRL_4)",
-				     "DISP1_RST",
-				     "DISP2_RST",
-				     "TOUCH_INT2",
-				     "LCD_VSI0_A",
-				     "LCD_VSI1_A",
-				     /* GPIO 70-77 used for ETM */
-				     "", "", "", "", "", "", "", "",
-				     /* GPIO 78-81 used for YCBCR */
-				     "", "", "", "",
-				     "ACCELEROMETER_INT1_RDY",
-				     "ACCELEROMETER_INT2",
-				     "TOUCH_INT",
-				     "WLAN_ENA",
-				     "", "", "", "", "",
-				     "FORCE_SENSING_INT",
-				     "FORCE_SENSING_RESET",
-				     "", "",
-				     "SDMMC_CD";
-		};
-
-		gpio@8000e080 {
-			/* GPIOs 96 - 127 */
-			gpio-line-names = "",
-				     "FORCE_SENSING_WU",
-				     "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "";
-		};
-
-		gpio@8000e100 {
-			/* GPIOs 128 - 159 */
-			gpio-line-names = "", "", "", "", "", "", "", "",
-				     "", "", "",
-				     "DIPRO_INT", /* GPIO139 */
-				     "XSHUTDOWN_SECONDARY_SENSOR",
-				     "XSHUTDOWN_PRIMARY_SENSOR",
-				     "NFC_RST (NFC_CTRL_",
-				     "TOUCH_RST",
-				     "NFC_IRQ (NFC_CTRL_1)",
-				     "HAL_SW",
-				     "TOUCH_RST2",
-				     "", "",
-				     "VAUDIO_HF_EN", /* GPIO149 */
-				     "", "", "", "", "", "", "", "", "", "";
-		};
-
-		gpio@8000e180 {
-			/* GPIOs 160 - 191 */
-			gpio-line-names = "", "", "", "", "", "", "", "",
-				     "",
-				     "SDMMC_EN",
-				     "XENON_CHARGE (FLASH_CONTROL_5)",
-				     "GBF_ENA_RESET",
-				     "", "", "", "",
-				     "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "";
-		};
-
-		gpio@8011e000 {
-			/* GPIOs 192 - 223 */
-			gpio-line-names = "HDTV_INTN",
-				     "", "", "",
-				     "HDTV_RSTN",
-				     "", "", "",
-				     "", /* GPIO200 */
-				     "", "", "", "", "", "", "",
-				     /* GPIO208-216 used for WGBF_MC1 */
-				     "", "", "", "", "", "", "", "", "",
-				     "SW_FRONT_PROXIMITY", /* GPIO217 */
-				     "KPD_CTRL_INT", /* Keypad controller */
-				     "", "", "", "", "";
-		};
-
-		gpio@8011e080 {
-			/* GPIOs 224 - 255 */
-			gpio-line-names = "", "",
-				     "HSIT_ACWAKE0",
-				     "", "", "", "", "",
-				     "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "";
-		};
-
-		// External Micro SD slot
-		mmc@80126000 {
-			cd-gpios  = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
-		};
-
-		pinctrl {
-			/*
-			 * Set this up using hogs, as time goes by and as seems fit, these
-			 * can be moved over to being controlled by respective device.
-			 */
-			pinctrl-names = "default";
-			pinctrl-0 = <&ipgpio_hrefv60_mode>,
-				  <&etm_hrefv60_mode>,
-				  <&nahj_hrefv60_mode>,
-				  <&nfc_hrefv60_mode>,
-				  <&force_hrefv60_mode>,
-				  <&dipro_hrefv60_mode>,
-				  <&vaudio_hf_hrefv60_mode>,
-				  <&gbf_hrefv60_mode>,
-				  <&hdtv_hrefv60_mode>,
-				  <&gpios_hrefv60_mode>;
-
-			sdi0 {
-				sdi0_default_mode: sdi0_default {
-					/* SD card detect GPIO pin, extend default state */
-					default_hrefv60_cfg1 {
-						pins = "GPIO95_E8";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			ipgpio {
-				/*
-				 * XENON Flashgun on image processor GPIO (controlled from image
-				 * processor firmware), mux in these image processor GPIO lines 0
-				 * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant
-				 * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias
-				 * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output.
-				 */
-				ipgpio_hrefv60_mode: ipgpio_hrefv60 {
-					hrefv60_mux {
-						function = "ipgpio";
-						groups = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1";
-					};
-					hrefv60_cfg1 {
-						pins = "GPIO6_AF6", "GPIO7_AG5";
-						ste,config = <&in_pu>;
-					};
-					hrefv60_cfg2 {
-						pins = "GPIO21_AB3";
-						ste,config = <&gpio_out_lo>;
-					};
-					hrefv60_cfg3 {
-						pins = "GPIO64_F3";
-						ste,config = <&out_lo>;
-					};
-				};
-			};
-			etm {
-				/*
-				 * Drive D19-D23 for the ETM PTM trace interface low,
-				 * (presumably pins are unconnected therefore grounded here,
-				 * the "other alt C1" setting enables these pins)
-				 */
-				etm_hrefv60_mode: etm_hrefv60 {
-					hrefv60_cfg1 {
-						pins =
-						"GPIO70_G5",
-						"GPIO71_G4",
-						"GPIO72_H4",
-						"GPIO73_H3",
-						"GPIO74_J3";
-						ste,config = <&gpio_out_lo>;
-					};
-				 };
-			};
-			nahj {
-				nahj_hrefv60_mode: nahj_hrefv60 {
-					/* NAHJ CTRL on GPIO76 to low, CTRL_INV on GPIO216 to high */
-					hrefv60_cfg1 {
-						pins = "GPIO76_J2";
-						ste,config = <&gpio_out_lo>;
-					};
-					hrefv60_cfg2 {
-						pins = "GPIO216_AG12";
-						ste,config = <&gpio_out_hi>;
-					};
-				 };
-			};
-			nfc {
-				nfc_hrefv60_mode: nfc_hrefv60 {
-					/* NFC ENA and RESET to low, pulldown IRQ line */
-					hrefv60_cfg1 {
-						pins =
-						"GPIO77_H1", /* NFC_ENA */
-						"GPIO142_C11"; /* NFC_RESET */
-						ste,config = <&gpio_out_lo>;
-					};
-					hrefv60_cfg2 {
-						pins = "GPIO144_B13"; /* NFC_IRQ */
-						ste,config = <&gpio_in_pd>;
-					};
-				 };
-			};
-			force {
-				force_hrefv60_mode: force_hrefv60 {
-					hrefv60_cfg1 {
-						pins = "GPIO91_B6"; /* FORCE_SENSING_INT */
-						ste,config = <&gpio_in_pu>;
-					};
-					hrefv60_cfg2 {
-						pins =
-						"GPIO92_D6", /* FORCE_SENSING_RST */
-						"GPIO97_D9"; /* FORCE_SENSING_WU */
-						ste,config = <&gpio_out_lo>;
-					};
-				 };
-			};
-			dipro {
-				dipro_hrefv60_mode: dipro_hrefv60 {
-					hrefv60_cfg1 {
-						pins = "GPIO139_C9"; /* DIPRO_INT */
-						ste,config = <&gpio_in_pu>;
-					};
-				 };
-			};
-			vaudio_hf {
-				vaudio_hf_hrefv60_mode: vaudio_hf_hrefv60 {
-					/* Audio Amplifier HF enable GPIO */
-					hrefv60_cfg1 {
-						pins = "GPIO149_B14"; /* VAUDIO_HF_EN, enable MAX8968 */
-						ste,config = <&gpio_out_hi>;
-					};
-				 };
-			};
-			gbf {
-				gbf_hrefv60_mode: gbf_hrefv60 {
-					/*
-					 * GBF (GPS, Bluetooth, FM-radio) interface,
-					 * pull low to reset state
-					 */
-					hrefv60_cfg1 {
-						pins = "GPIO171_D23"; /* GBF_ENA_RESET */
-						ste,config = <&gpio_out_lo>;
-					};
-				 };
-			};
-			hdtv {
-				hdtv_hrefv60_mode: hdtv_hrefv60 {
-					/* MSP : HDTV INTERFACE GPIO line */
-					hrefv60_cfg1 {
-						pins = "GPIO192_AJ27";
-						ste,config = <&gpio_in_pd>;
-					};
-				 };
-			};
-			mcde {
-				lcd_hrefv60_mode: lcd_hrefv60 {
-					/*
-					 * Display Interface 1 uses GPIO 65 for RST (reset).
-					 * Display Interface 2 uses GPIO 66 for RST (reset).
-					 * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
-					 */
-					hrefv60_cfg1 {
-						pins = "GPIO65_F1";
-						ste,config = <&gpio_out_hi>;
-					};
-					hrefv60_cfg2 {
-						pins = "GPIO66_G3";
-						ste,config = <&gpio_out_lo>;
-					};
-				};
-			};
-			gpios {
-				/* Dangling GPIO pins */
-				gpios_hrefv60_mode: gpios_hrefv60 {
-					default_cfg1 {
-						/* Normally UART1 RXD, now dangling */
-						pins = "GPIO4_AH6";
-						ste,config = <&in_pu>;
-					};
-				};
-			};
-		};
-	};
-};