ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 172 deletions

diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
deleted file mode 100644
index c905c2643a12..000000000000
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree for the ST-Ericsson Nomadik S8815 board
- * Produced by Calao Systems
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "ste-nomadik-stn8815.dtsi"
-
-/ {
-	model = "Calao Systems USB-S8815";
-	compatible = "calaosystems,usb-s8815";
-
-	chosen {
-		bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
-	};
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	gpio3: gpio@101e7000 {
-		/* This hog will bias the MMC/SD card detect line */
-		mmcsd-gpio {
-			gpio-hog;
-			gpios = <16 0x0>;
-			output-low;
-			line-name = "card detect bias";
-		};
-	};
-
-	src@101e0000 {
-		/* These chrystal drivers are not used on this board */
-		disable-sxtalo;
-		disable-mxtalo;
-	};
-
-	pinctrl {
-		/* Hog CD pins */
-		pinctrl-names = "default";
-		pinctrl-0 = <&cd_default_mode>;
-
-		uart0 {
-			/* Only use RX/TX pins */
-			uart0_s8815_mode: uart0_mux {
-				u0_default_mux {
-					function = "u0";
-					groups = "u0txrx_a_1";
-				};
-			};
-		};
-		mmcsd-cd {
-			cd_default_mode: cd_default {
-				cd_default_cfg1 {
-					/* CD input GPIO */
-					pins = "GPIO111_H21";
-					ste,input = <0>;
-				};
-				cd_default_cfg2 {
-					/* CD GPIO biasing */
-					pins = "GPIO112_J21";
-					ste,output = <0>;
-				};
-			};
-		};
-		gpioi2c {
-			gpioi2c_default_mode: gpioi2c_default {
-				gpioi2c_default_cfg {
-					pins = "GPIO73_C21", "GPIO74_C20";
-					ste,input = <0>;
-				};
-			};
-		};
-		user-led {
-			user_led_default_mode: user_led_default {
-				user_led_default_cfg {
-					pins = "GPIO2_C5";
-					ste,output = <1>;
-				};
-			};
-		};
-		user-button {
-			user_button_default_mode: user_button_default {
-				user_button_default_cfg {
-					pins = "GPIO3_A4";
-					ste,input = <0>;
-				};
-			};
-		};
-	};
-
-	/* Ethernet */
-	external-bus@34000000 {
-		compatible = "simple-bus";
-		reg = <0x34000000 0x1000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x34000000 0x1000000>;
-		ethernet@300 {
-			compatible = "smsc,lan91c111";
-			reg = <0x300 0x0fd00>;
-			interrupt-parent = <&gpio3>;
-			interrupts = <8 IRQ_TYPE_EDGE_RISING>;
-		};
-	};
-
-	i2c1 {
-		lis3lv02dl@1d {
-			/* Accelerometer */
-			compatible = "st,lis3lv02dl-accel";
-			reg = <0x1d>;
-		};
-	};
-
-	/* GPIO I2C connected to the USB portions of the STw4811 only */
-	gpio-i2c {
-		compatible = "i2c-gpio";
-		gpios = <&gpio2 10 0>, /* sda */
-			<&gpio2 9 0>; /* scl */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpioi2c_default_mode>;
-
-		stw4811@2d {
-			   compatible = "st,stw4811-usb";
-			   reg = <0x2d>;
-		};
-	};
-
-
-	amba {
-		/* Activate RXTX on UART 0 */
-		uart0: serial@101fd000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_s8815_mode>;
-			status = "okay";
-		};
-		/* Configure card detect for the uSD slot */
-		mmc@101f6000 {
-			cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	/* The user LED on the board is set up to be used for heartbeat */
-	leds {
-		compatible = "gpio-leds";
-		user-led {
-			label = "user_led";
-			gpios = <&gpio0 2 0x1>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-			pinctrl-names = "default";
-			pinctrl-0 = <&user_led_default_mode>;
-		};
-	};
-
-	/* User key mapped in as "escape" */
-	gpio-keys {
-		compatible = "gpio-keys";
-		user-button {
-			label = "user_button";
-			gpios = <&gpio0 3 0x1>;
-			linux,code = <1>; /* KEY_ESC */
-			wakeup-source;
-			pinctrl-names = "default";
-			pinctrl-0 = <&user_button_default_mode>;
-		};
-	};
-};