diff options
| author | Marek Vasut <marex@denx.de> | 2020-04-22 12:46:05 +0200 |
|---|---|---|
| committer | Alexandre Torgue <alexandre.torgue@st.com> | 2020-04-29 09:50:39 +0200 |
| commit | 7dd5cbba42c93897d43f9ad21e5e3e8069c21bfc (patch) | |
| tree | 01deb4da5d434aa1ae3fea919a1ca79cc8c76d58 /arch/arm/boot/dts/stm32mp157a-avenger96.dts | |
| parent | 84faf29b2d529a10cd71e609ddb237a5af8551a4 (diff) | |
ARM: dts: stm32: Enable WiFi on AV96
The WiFi/Bluetooth SDIO chip is attached to SDMMC3 on AV96, describe it
in DT to make it available. Remove WiFi LED and turn it into a regulator,
because it is a GPIO controlling the WL_REG_ON input of the WiFi chip.
The LED is just an indicator connected to the same line, but not the
primary function.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Diffstat (limited to 'arch/arm/boot/dts/stm32mp157a-avenger96.dts')
| -rw-r--r-- | arch/arm/boot/dts/stm32mp157a-avenger96.dts | 38 |
1 files changed, 31 insertions, 7 deletions
diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts index 3c068dc74103..310329a456ed 100644 --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts @@ -65,13 +65,6 @@ }; led5 { - label = "yellow:wifi"; - gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tx"; - default-state = "off"; - }; - - led6 { label = "blue:bt"; gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "bluetooth-power"; @@ -103,6 +96,17 @@ regulator-boot-on; vin-supply = <&vdd>; }; + + wlan_pwr: regulator-wlan { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; ðernet0 { @@ -380,6 +384,26 @@ status = "okay"; }; +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_b>; + pinctrl-1 = <&sdmmc3_b4_od_pins_b>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>; + broken-cd; + non-removable; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&wlan_pwr>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + &uart4 { /* On Low speed expansion header */ label = "LS-UART1"; |