summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-05-16 08:38:17 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2019-05-16 08:38:17 -0700
commite8a1d70117116c8d96c266f0b99e931717670eaf (patch)
tree384082054720dc01ad44f0342faeb80297f7fd8c /arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
parent22c58fd70ca48a29505922b1563826593b08cc00 (diff)
parent6cbc4d88ad208d6f5b9567bac2fff038e1bbfa77 (diff)
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Device-tree updates from Olof Johansson: "Besides new bindings and additional descriptions of hardware blocks for various SoCs and boards, the main new contents here is: SoCs: - Intel Agilex (SoCFPGA) - NXP i.MX8MM (Quad Cortex-A53 with media/graphics focus) New boards: - Allwinner: + RerVision H3-DVK (H3) + Oceanic 5205 5inMFD (H6) + Beelink GS2 (H6) + Orange Pi 3 (H6) - Rockchip: + Orange Pi RK3399 + Nanopi NEO4 + Veyron-Mighty Chromebook variant - Amlogic: + SEI Robotics SEI510 - ST Micro: + stm32mp157a discovery1 + stm32mp157c discovery2 - NXP: + Eckelmann ci4x10 (i.MX6DL) + i.MX8MM EVK (i.MX8MM) + ZII i.MX7 RPU2 (i.MX7) + ZII SPB4 (VF610) + Zii Ultra (i.MX8M) + TQ TQMa7S (i.MX7Solo) + TQ TQMa7D (i.MX7Dual) + Kobo Aura (i.MX50) + Menlosystems M53 (i.MX53)j - Nvidia: + Jetson Nano (Tegra T210)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (593 commits) arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge arm64: dts: bitmain: Add pinctrl support for BM1880 SoC arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board arm64: dts: bitmain: Add GPIO support for BM1880 SoC ARM: dts: gemini: Indent DIR-685 partition table dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20 arm64: dts: msm8998: thermal: Fix number of supported sensors arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones arm64: dts: exynos: Move fixed-clocks out of soc arm64: dts: exynos: Move pmu and timer nodes out of soc ARM: dts: s5pv210: Fix camera clock provider on Goni board ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210 ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250 ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250 ARM: dts: exynos: Move pmu and timer nodes out of soc arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64 arm64: dts: db820c: Add sound card support arm64: dts: apq8096-db820c: Add HDMI display support ...
Diffstat (limited to 'arch/arm/boot/dts/sun8i-h3-orangepi-2.dts')
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-2.dts34
1 files changed, 2 insertions, 32 deletions
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
index f1fc6bdca8be..597c425d08ec 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -75,8 +75,6 @@
leds {
compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
status_led {
label = "orangepi:red:status";
@@ -92,8 +90,6 @@
r_gpio_keys {
compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&sw_r_opc>;
sw2 {
label = "sw2";
@@ -110,8 +106,6 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_pwrseq_pin_orangepi>;
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
};
};
@@ -152,7 +146,7 @@
&ir {
pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
+ pinctrl-0 = <&r_ir_rx_pin>;
status = "okay";
};
@@ -179,30 +173,6 @@
};
};
-&pio {
- leds_opc: led_pins {
- pins = "PA15";
- function = "gpio_out";
- };
-};
-
-&r_pio {
- leds_r_opc: led_pins {
- pins = "PL10";
- function = "gpio_out";
- };
-
- sw_r_opc: key_pins {
- pins = "PL3", "PL4";
- function = "gpio_in";
- };
-
- wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin {
- pins = "PL7";
- function = "gpio_out";
- };
-};
-
&reg_usb1_vbus {
gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
status = "okay";
@@ -210,7 +180,7 @@
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};