Merge tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM DT and driver fixes from Arnd Bergmann:
 "For the devicetree files, there are a total of 20 patches, almost
  entirely for 32-bit machines:

   - The Allwinner/sun9i r40 SoC dtsi file contains a number of issues,
     both for correctness and for style that are addressed in separate
     patches. This causes most of the changed lines of the DT updates
     this time.

   - More Allwinner updates fixing the identification of the security
     system on sun8i/A33, a recent regression of the A83t ethernet, and
     a few board specific issues on the TBS-A711 macine.

   - Several bug fixes for OMAP dts files, most notably fixing the
     timings for the NAND flash on the Nokia N900 that regressed a while
     ago after the move to configuring them from DT. Some other OMAPs
     now set the correct dma limits on the L3 bus, and a regression fix
     addresses lost Ethernet on dm814x

   - One incorrect setting in the newly added Raspberry Pi Zero W that
     may cause issues with the SD card controller.

   - A missing property on the bcm2835 firmware node caused incorrect
     DMA settings.

   - An old bug on the oxnas platform causing spurious interrupts is
     finally addressed.

   - A regression on the Exynos Midas board broke the OLED panel power
     supply.

   - The i.MX6 phycore SoM specified the wrong voltage for the SoC, this
     is now set to the values from the datasheet.

   - Some 64-bit machines use a deprecated string to identify the PSCI
     firmware.

  There are also several small code fixes addressing mostly serious
  issues:

   - Fix the sunxi rsb bus access to no longer return incorrect data
     when mixing 8 and 16 bit I/O.

   - Fix a suspend/resume regression on the OMAP2+ lcdc from a missing
     quirk in the ti-sysc driver

   - Fix a NULL pointer access from a race in the fsl dpio driver

   - Fix a v5.5 regression in the exynos-chipid driver that caused an
     invalid error code probing the device on non-exynos platforms

   - Fix an out-of-bounds access in the AMD TEE driver"

* tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  soc: samsung: chipid: Fix return value on non-Exynos platforms
  arm64: dts: Fix leftover entry-methods for PSCI
  ARM: dts: exynos: Fix regulator node aliasing on Midas-based boards
  ARM: dts: oxnas: Fix clear-mask property
  ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations
  ARM: dts: omap5: Add bus_dma_limit for L3 bus
  ARM: dts: omap4-droid4: Fix lost touchscreen interrupts
  ARM: dts: dra7: Add bus_dma_limit for L3 bus
  ARM: bcm2835-rpi-zero-w: Add missing pinctrl name
  ARM: dts: sun8i: a33: add the new SS compatible
  dt-bindings: crypto: add new compatible for A33 SS
  ARM: dts: sun8i: r40: Move SPI device nodes based on address order
  ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3
  ARM: dts: sun8i: r40: Move AHCI device node based on address order
  ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage
  soc: fsl: dpio: register dpio irq handlers after dpio create
  tee: amdtee: out of bounds read in find_session()
  ARM: dts: N900: fix onenand timings
  bus: ti-sysc: Fix quirk flags for lcdc on am335x
  ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode
  ...

1 files changed, 62 insertions, 63 deletions

diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 8f09a24b36ec..a9d5d6ddbd71 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -181,6 +181,32 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		csi0: csi@1c09000 {
 			compatible = "allwinner,sun8i-r40-csi0",
 				     "allwinner,sun7i-a20-csi0";
@@ -290,6 +316,29 @@
 			resets = <&ccu RST_BUS_CE>;
 		};
 
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun8i-r40-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+			resets = <&ccu RST_BUS_SATA>;
+			reset-names = "ahci";
+			status = "disabled";
+		};
+
 		ehci1: usb@1c19000 {
 			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
 			reg = <0x01c19000 0x100>;
@@ -336,6 +385,19 @@
 			status = "disabled";
 		};
 
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		ccu: clock@1c20000 {
 			compatible = "allwinner,sun8i-r40-ccu";
 			reg = <0x01c20000 0x400>;
@@ -653,69 +715,6 @@
 			#size-cells = <0>;
 		};
 
-		spi0: spi@1c05000 {
-			compatible = "allwinner,sun8i-r40-spi",
-				     "allwinner,sun8i-h3-spi";
-			reg = <0x01c05000 0x1000>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
-			clock-names = "ahb", "mod";
-			resets = <&ccu RST_BUS_SPI0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@1c06000 {
-			compatible = "allwinner,sun8i-r40-spi",
-				     "allwinner,sun8i-h3-spi";
-			reg = <0x01c06000 0x1000>;
-			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
-			clock-names = "ahb", "mod";
-			resets = <&ccu RST_BUS_SPI1>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi2: spi@1c07000 {
-			compatible = "allwinner,sun8i-r40-spi",
-				     "allwinner,sun8i-h3-spi";
-			reg = <0x01c07000 0x1000>;
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
-			clock-names = "ahb", "mod";
-			resets = <&ccu RST_BUS_SPI2>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi3: spi@1c0f000 {
-			compatible = "allwinner,sun8i-r40-spi",
-				     "allwinner,sun8i-h3-spi";
-			reg = <0x01c0f000 0x1000>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
-			clock-names = "ahb", "mod";
-			resets = <&ccu RST_BUS_SPI3>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		ahci: sata@1c18000 {
-			compatible = "allwinner,sun8i-r40-ahci";
-			reg = <0x01c18000 0x1000>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
-			resets = <&ccu RST_BUS_SATA>;
-			reset-names = "ahci";
-			status = "disabled";
-
-		};
-
 		gmac: ethernet@1c50000 {
 			compatible = "allwinner,sun8i-r40-gmac";
 			syscon = <&ccu>;