Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Arnd Bergmann:
 "We add device tree files for a couple of additional SoCs in various
  areas:

  Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for
  networking, Amlogic A113D for audio, and Renesas R-Car V3M for
  automotive.

  As usual, lots of new boards get added based on those and other SoCs:

   - Actions S500 based CubieBoard6 single-board computer

   - Amlogic Meson-AXG A113D based development board
   - Amlogic S912 based Khadas VIM2 single-board computer
   - Amlogic S912 based Tronsmart Vega S96 set-top-box

   - Allwinner H5 based NanoPi NEO Plus2 single-board computer
   - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
   - Allwinner A83T based TBS A711 Tablet

   - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
   - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
     wireless access points and routers

   - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
   - NXP i.MX53 based GE Healthcare PPD biometric monitor
   - NXP i.MX6 based Pistachio single-board computer
   - NXP i.MX6 based Vining-2000 automotive diagnostic interface
   - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants

   - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
   - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet

   - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA

   - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
   - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
   - Renasas r8a7745 based iWave G22D-SODIMM SoM

   - Rockchip rk3288 based Amarula Vyasa single-board computer

   - Samsung Exynos5800 based Odroid HC1 single-board computer

  For existing SoC support, there was a lot of ongoing work, as usual
  most of that concentrated on the Renesas, Rockchip, OMAP, i.MX,
  Amlogic and Allwinner platforms, but others were also active.

  Rob Herring and many others worked on reducing the number of issues
  that the latest version of 'dtc' now warns about. Unfortunately there
  is still a lot left to do.

  A rework of the ARM foundation model introduced several new files for
  common variations of the model"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits)
  arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3
  dt-bindings: bus: Add documentation for the Technologic Systems NBUS
  arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock
  ARM: dts: owl-s500: Add CubieBoard6
  dt-bindings: arm: actions: Add CubieBoard6
  ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock
  ARM: dts: owl-s500: Set power domains for CPU2 and CPU3
  arm: dts: mt7623: remove unused compatible string for pio node
  arm: dts: mt7623: update usb related nodes
  arm: dts: mt7623: update crypto node
  ARM: dts: sun8i: a711: Enable USB OTG
  ARM: dts: sun8i: a711: Add regulator support
  ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1
  ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1
  ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file
  ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes
  ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes
  ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes
  ARM: dts: sunxi: Add dtsi for AXP81x PMIC
  arm64: dts: allwinner: H5: Restore EMAC changes
  ...

1 files changed, 56 insertions, 61 deletions

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 759a72317eb8..90eac0b2a193 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -42,8 +42,6 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton64.dtsi"
-
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 #include <dt-bindings/clock/sun9i-a80-ccu.h>
@@ -54,6 +52,8 @@
 #include <dt-bindings/reset/sun9i-a80-usb.h>
 
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
 	interrupt-parent = <&gic>;
 
 	cpus {
@@ -109,11 +109,6 @@
 		};
 	};
 
-	memory {
-		/* 8GB max. with LPAE */
-		reg = <0 0x20000000 0x02 0>;
-	};
-
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -144,7 +139,7 @@
 		 * would also throw all the PLL clock rates off, or just the
 		 * downstream clocks in the PRCM.
 		 */
-		osc24M: osc24M_clk {
+		osc24M: clk-24M {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -156,7 +151,7 @@
 		 * AC100 codec/RTC chip. This serves as a placeholder for
 		 * board dts files to specify the source.
 		 */
-		osc32k: osc32k_clk {
+		osc32k: clk-32k {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <1>;
@@ -164,7 +159,7 @@
 			clock-output-names = "osc32k";
 		};
 
-		cpus_clk: clk@08001410 {
+		cpus_clk: clk@8001410 {
 			compatible = "allwinner,sun9i-a80-cpus-clk";
 			reg = <0x08001410 0x4>;
 			#clock-cells = <0>;
@@ -174,7 +169,7 @@
 			clock-output-names = "cpus";
 		};
 
-		ahbs: ahbs_clk {
+		ahbs: clk-ahbs {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
 			clock-div = <1>;
@@ -183,7 +178,7 @@
 			clock-output-names = "ahbs";
 		};
 
-		apbs: clk@0800141c {
+		apbs: clk@800141c {
 			compatible = "allwinner,sun8i-a23-apb0-clk";
 			reg = <0x0800141c 0x4>;
 			#clock-cells = <0>;
@@ -191,7 +186,7 @@
 			clock-output-names = "apbs";
 		};
 
-		apbs_gates: clk@08001428 {
+		apbs_gates: clk@8001428 {
 			compatible = "allwinner,sun9i-a80-apbs-gates-clk";
 			reg = <0x08001428 0x4>;
 			#clock-cells = <1>;
@@ -212,7 +207,7 @@
 					"apbs_i2s1", "apbs_twd";
 		};
 
-		r_1wire_clk: clk@08001450 {
+		r_1wire_clk: clk@8001450 {
 			reg = <0x08001450 0x4>;
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-mod0-clk";
@@ -220,7 +215,7 @@
 			clock-output-names = "r_1wire";
 		};
 
-		r_ir_clk: clk@08001454 {
+		r_ir_clk: clk@8001454 {
 			reg = <0x08001454 0x4>;
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-mod0-clk";
@@ -239,7 +234,7 @@
 		 */
 		ranges = <0 0 0 0x20000000>;
 
-		ehci0: usb@00a00000 {
+		ehci0: usb@a00000 {
 			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
 			reg = <0x00a00000 0x100>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
@@ -250,7 +245,7 @@
 			status = "disabled";
 		};
 
-		ohci0: usb@00a00400 {
+		ohci0: usb@a00400 {
 			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
 			reg = <0x00a00400 0x100>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -262,7 +257,7 @@
 			status = "disabled";
 		};
 
-		usbphy1: phy@00a00800 {
+		usbphy1: phy@a00800 {
 			compatible = "allwinner,sun9i-a80-usb-phy";
 			reg = <0x00a00800 0x4>;
 			clocks = <&usb_clocks CLK_USB0_PHY>;
@@ -273,7 +268,7 @@
 			#phy-cells = <0>;
 		};
 
-		ehci1: usb@00a01000 {
+		ehci1: usb@a01000 {
 			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
 			reg = <0x00a01000 0x100>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -284,7 +279,7 @@
 			status = "disabled";
 		};
 
-		usbphy2: phy@00a01800 {
+		usbphy2: phy@a01800 {
 			compatible = "allwinner,sun9i-a80-usb-phy";
 			reg = <0x00a01800 0x4>;
 			clocks = <&usb_clocks CLK_USB1_HSIC>,
@@ -303,7 +298,7 @@
 			phy_type = "hsic";
 		};
 
-		ehci2: usb@00a02000 {
+		ehci2: usb@a02000 {
 			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
 			reg = <0x00a02000 0x100>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -314,7 +309,7 @@
 			status = "disabled";
 		};
 
-		ohci2: usb@00a02400 {
+		ohci2: usb@a02400 {
 			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
 			reg = <0x00a02400 0x100>;
 			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -326,7 +321,7 @@
 			status = "disabled";
 		};
 
-		usbphy3: phy@00a02800 {
+		usbphy3: phy@a02800 {
 			compatible = "allwinner,sun9i-a80-usb-phy";
 			reg = <0x00a02800 0x4>;
 			clocks = <&usb_clocks CLK_USB2_HSIC>,
@@ -343,7 +338,7 @@
 			#phy-cells = <0>;
 		};
 
-		usb_clocks: clock@00a08000 {
+		usb_clocks: clock@a08000 {
 			compatible = "allwinner,sun9i-a80-usb-clks";
 			reg = <0x00a08000 0x8>;
 			clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
@@ -352,7 +347,7 @@
 			#reset-cells = <1>;
 		};
 
-		mmc0: mmc@01c0f000 {
+		mmc0: mmc@1c0f000 {
 			compatible = "allwinner,sun9i-a80-mmc";
 			reg = <0x01c0f000 0x1000>;
 			clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>,
@@ -367,7 +362,7 @@
 			#size-cells = <0>;
 		};
 
-		mmc1: mmc@01c10000 {
+		mmc1: mmc@1c10000 {
 			compatible = "allwinner,sun9i-a80-mmc";
 			reg = <0x01c10000 0x1000>;
 			clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>,
@@ -382,7 +377,7 @@
 			#size-cells = <0>;
 		};
 
-		mmc2: mmc@01c11000 {
+		mmc2: mmc@1c11000 {
 			compatible = "allwinner,sun9i-a80-mmc";
 			reg = <0x01c11000 0x1000>;
 			clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>,
@@ -397,7 +392,7 @@
 			#size-cells = <0>;
 		};
 
-		mmc3: mmc@01c12000 {
+		mmc3: mmc@1c12000 {
 			compatible = "allwinner,sun9i-a80-mmc";
 			reg = <0x01c12000 0x1000>;
 			clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>,
@@ -412,7 +407,7 @@
 			#size-cells = <0>;
 		};
 
-		mmc_config_clk: clk@01c13000 {
+		mmc_config_clk: clk@1c13000 {
 			compatible = "allwinner,sun9i-a80-mmc-config-clk";
 			reg = <0x01c13000 0x10>;
 			clocks = <&ccu CLK_BUS_MMC>;
@@ -425,7 +420,7 @@
 					     "mmc2_config", "mmc3_config";
 		};
 
-		gic: interrupt-controller@01c41000 {
+		gic: interrupt-controller@1c41000 {
 			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
 			reg = <0x01c41000 0x1000>,
 			      <0x01c42000 0x2000>,
@@ -436,7 +431,7 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
-		de_clocks: clock@03000000 {
+		de_clocks: clock@3000000 {
 			compatible = "allwinner,sun9i-a80-de-clks";
 			reg = <0x03000000 0x30>;
 			clocks = <&ccu CLK_DE>,
@@ -450,7 +445,7 @@
 			#reset-cells = <1>;
 		};
 
-		ccu: clock@06000000 {
+		ccu: clock@6000000 {
 			compatible = "allwinner,sun9i-a80-ccu";
 			reg = <0x06000000 0x800>;
 			clocks = <&osc24M>, <&osc32k>;
@@ -459,7 +454,7 @@
 			#reset-cells = <1>;
 		};
 
-		timer@06000c00 {
+		timer@6000c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x06000c00 0xa0>;
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -472,13 +467,13 @@
 			clocks = <&osc24M>;
 		};
 
-		wdt: watchdog@06000ca0 {
+		wdt: watchdog@6000ca0 {
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x06000ca0 0x20>;
 			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		pio: pinctrl@06000800 {
+		pio: pinctrl@6000800 {
 			compatible = "allwinner,sun9i-a80-pinctrl";
 			reg = <0x06000800 0x400>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
@@ -494,12 +489,12 @@
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 
-			i2c3_pins_a: i2c3@0 {
+			i2c3_pins: i2c3-pins {
 				pins = "PG10", "PG11";
 				function = "i2c3";
 			};
 
-			mmc0_pins: mmc0 {
+			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1" ,"PF2", "PF3",
 				       "PF4", "PF5";
 				function = "mmc0";
@@ -507,7 +502,7 @@
 				bias-pull-up;
 			};
 
-			mmc1_pins: mmc1 {
+			mmc1_pins: mmc1-pins {
 				pins = "PG0", "PG1" ,"PG2", "PG3",
 						 "PG4", "PG5";
 				function = "mmc1";
@@ -515,7 +510,7 @@
 				bias-pull-up;
 			};
 
-			mmc2_8bit_pins: mmc2_8bit {
+			mmc2_8bit_pins: mmc2-8bit-pins {
 				pins = "PC6", "PC7", "PC8", "PC9",
 				       "PC10", "PC11", "PC12",
 				       "PC13", "PC14", "PC15",
@@ -525,18 +520,18 @@
 				bias-pull-up;
 			};
 
-			uart0_pins_a: uart0@0 {
+			uart0_ph_pins: uart0-ph-pins {
 				pins = "PH12", "PH13";
 				function = "uart0";
 			};
 
-			uart4_pins_a: uart4@0 {
+			uart4_pins: uart4-pins {
 				pins = "PG12", "PG13", "PG14", "PG15";
 				function = "uart4";
 			};
 		};
 
-		uart0: serial@07000000 {
+		uart0: serial@7000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x07000000 0x400>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
@@ -547,7 +542,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial@07000400 {
+		uart1: serial@7000400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x07000400 0x400>;
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
@@ -558,7 +553,7 @@
 			status = "disabled";
 		};
 
-		uart2: serial@07000800 {
+		uart2: serial@7000800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x07000800 0x400>;
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -569,7 +564,7 @@
 			status = "disabled";
 		};
 
-		uart3: serial@07000c00 {
+		uart3: serial@7000c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x07000c00 0x400>;
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
@@ -580,7 +575,7 @@
 			status = "disabled";
 		};
 
-		uart4: serial@07001000 {
+		uart4: serial@7001000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x07001000 0x400>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
@@ -591,7 +586,7 @@
 			status = "disabled";
 		};
 
-		uart5: serial@07001400 {
+		uart5: serial@7001400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x07001400 0x400>;
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
@@ -602,7 +597,7 @@
 			status = "disabled";
 		};
 
-		i2c0: i2c@07002800 {
+		i2c0: i2c@7002800 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x07002800 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -613,7 +608,7 @@
 			#size-cells = <0>;
 		};
 
-		i2c1: i2c@07002c00 {
+		i2c1: i2c@7002c00 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x07002c00 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -624,7 +619,7 @@
 			#size-cells = <0>;
 		};
 
-		i2c2: i2c@07003000 {
+		i2c2: i2c@7003000 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x07003000 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
@@ -635,7 +630,7 @@
 			#size-cells = <0>;
 		};
 
-		i2c3: i2c@07003400 {
+		i2c3: i2c@7003400 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x07003400 0x400>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -646,7 +641,7 @@
 			#size-cells = <0>;
 		};
 
-		i2c4: i2c@07003800 {
+		i2c4: i2c@7003800 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x07003800 0x400>;
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
@@ -657,19 +652,19 @@
 			#size-cells = <0>;
 		};
 
-		r_wdt: watchdog@08001000 {
+		r_wdt: watchdog@8001000 {
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x08001000 0x20>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		apbs_rst: reset@080014b0 {
+		apbs_rst: reset@80014b0 {
 			reg = <0x080014b0 0x4>;
 			compatible = "allwinner,sun6i-a31-clock-reset";
 			#reset-cells = <1>;
 		};
 
-		nmi_intc: interrupt-controller@080015a0 {
+		nmi_intc: interrupt-controller@80015a0 {
 			compatible = "allwinner,sun9i-a80-nmi";
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -677,7 +672,7 @@
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		r_ir: ir@08002000 {
+		r_ir: ir@8002000 {
 			compatible = "allwinner,sun5i-a13-ir";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -689,7 +684,7 @@
 			status = "disabled";
 		};
 
-		r_uart: serial@08002800 {
+		r_uart: serial@8002800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x08002800 0x400>;
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -700,7 +695,7 @@
 			status = "disabled";
 		};
 
-		r_pio: pinctrl@08002c00 {
+		r_pio: pinctrl@8002c00 {
 			compatible = "allwinner,sun9i-a80-r-pinctrl";
 			reg = <0x08002c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
@@ -713,12 +708,12 @@
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
-			r_ir_pins: r_ir {
+			r_ir_pins: r-ir-pins {
 				pins = "PL6";
 				function = "s_cir_rx";
 			};
 
-			r_rsb_pins: r_rsb {
+			r_rsb_pins: r-rsb-pins {
 				pins = "PN0", "PN1";
 				function = "s_rsb";
 				drive-strength = <20>;
@@ -726,7 +721,7 @@
 			};
 		};
 
-		r_rsb: i2c@08003400 {
+		r_rsb: i2c@8003400 {
 			compatible = "allwinner,sun8i-a23-rsb";
 			reg = <0x08003400 0x400>;
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;