ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

18 files changed, 2334 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/xilinx/Makefile b/arch/arm/boot/dts/xilinx/Makefile
new file mode 100644
index 000000000000..9233e539b192
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ZYNQ) += \
+	zynq-cc108.dtb \
+	zynq-ebaz4205.dtb \
+	zynq-microzed.dtb \
+	zynq-parallella.dtb \
+	zynq-zc702.dtb \
+	zynq-zc706.dtb \
+	zynq-zc770-xm010.dtb \
+	zynq-zc770-xm011.dtb \
+	zynq-zc770-xm012.dtb \
+	zynq-zc770-xm013.dtb \
+	zynq-zed.dtb \
+	zynq-zturn.dtb \
+	zynq-zturn-v5.dtb \
+	zynq-zybo.dtb \
+	zynq-zybo-z7.dtb
diff --git a/arch/arm/boot/dts/xilinx/zynq-7000.dtsi b/arch/arm/boot/dts/xilinx/zynq-7000.dtsi
new file mode 100644
index 000000000000..a7db3f3009f2
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-7000.dtsi
@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 - 2014 Xilinx
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,zynq-7000";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&clkc 3>;
+			clock-latency = <1000>;
+			cpu0-supply = <&regulator_vccpint>;
+			operating-points = <
+				/* kHz    uV */
+				666667  1000000
+				333334  1000000
+			>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&clkc 3>;
+		};
+	};
+
+	fpga_full: fpga-full {
+		compatible = "fpga-region";
+		fpga-mgr = <&devcfg>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+	};
+
+	pmu@f8891000 {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 5 4>, <0 6 4>;
+		interrupt-parent = <&intc>;
+		reg = <0xf8891000 0x1000>,
+		      <0xf8893000 0x1000>;
+	};
+
+	regulator_vccpint: fixedregulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCPINT";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	replicator {
+		compatible = "arm,coresight-static-replicator";
+		clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+		clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etb_in_port>;
+				};
+			};
+		};
+		in-ports {
+			/* replicator input port */
+			port {
+				replicator_in_port0: endpoint {
+					remote-endpoint = <&funnel_out_port>;
+				};
+			};
+		};
+	};
+
+	amba: axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+
+		adc: adc@f8007100 {
+			compatible = "xlnx,zynq-xadc-1.00.a";
+			reg = <0xf8007100 0x20>;
+			interrupts = <0 7 4>;
+			interrupt-parent = <&intc>;
+			clocks = <&clkc 12>;
+		};
+
+		can0: can@e0008000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clocks = <&clkc 19>, <&clkc 36>;
+			clock-names = "can_clk", "pclk";
+			reg = <0xe0008000 0x1000>;
+			interrupts = <0 28 4>;
+			interrupt-parent = <&intc>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+		};
+
+		can1: can@e0009000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clocks = <&clkc 20>, <&clkc 37>;
+			clock-names = "can_clk", "pclk";
+			reg = <0xe0009000 0x1000>;
+			interrupts = <0 51 4>;
+			interrupt-parent = <&intc>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+		};
+
+		gpio0: gpio@e000a000 {
+			compatible = "xlnx,zynq-gpio-1.0";
+			#gpio-cells = <2>;
+			clocks = <&clkc 42>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 20 4>;
+			reg = <0xe000a000 0x1000>;
+		};
+
+		i2c0: i2c@e0004000 {
+			compatible = "cdns,i2c-r1p10";
+			status = "disabled";
+			clocks = <&clkc 38>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 25 4>;
+			clock-frequency = <400000>;
+			reg = <0xe0004000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@e0005000 {
+			compatible = "cdns,i2c-r1p10";
+			status = "disabled";
+			clocks = <&clkc 39>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 48 4>;
+			clock-frequency = <400000>;
+			reg = <0xe0005000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		intc: interrupt-controller@f8f01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0xF8F01000 0x1000>,
+			      <0xF8F00100 0x100>;
+		};
+
+		L2: cache-controller@f8f02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xF8F02000 0x1000>;
+			interrupts = <0 2 4>;
+			arm,data-latency = <3 2 2>;
+			arm,tag-latency = <2 2 2>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		mc: memory-controller@f8006000 {
+			compatible = "xlnx,zynq-ddrc-a05";
+			reg = <0xf8006000 0x1000>;
+		};
+
+		uart0: serial@e0000000 {
+			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+			status = "disabled";
+			clocks = <&clkc 23>, <&clkc 40>;
+			clock-names = "uart_clk", "pclk";
+			reg = <0xE0000000 0x1000>;
+			interrupts = <0 27 4>;
+		};
+
+		uart1: serial@e0001000 {
+			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+			status = "disabled";
+			clocks = <&clkc 24>, <&clkc 41>;
+			clock-names = "uart_clk", "pclk";
+			reg = <0xE0001000 0x1000>;
+			interrupts = <0 50 4>;
+		};
+
+		spi0: spi@e0006000 {
+			compatible = "xlnx,zynq-spi-r1p6";
+			reg = <0xe0006000 0x1000>;
+			status = "disabled";
+			interrupt-parent = <&intc>;
+			interrupts = <0 26 4>;
+			clocks = <&clkc 25>, <&clkc 34>;
+			clock-names = "ref_clk", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@e0007000 {
+			compatible = "xlnx,zynq-spi-r1p6";
+			reg = <0xe0007000 0x1000>;
+			status = "disabled";
+			interrupt-parent = <&intc>;
+			interrupts = <0 49 4>;
+			clocks = <&clkc 26>, <&clkc 35>;
+			clock-names = "ref_clk", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		qspi: spi@e000d000 {
+			compatible = "xlnx,zynq-qspi-1.0";
+			reg = <0xe000d000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 19 4>;
+			clocks = <&clkc 10>, <&clkc 43>;
+			clock-names = "ref_clk", "pclk";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gem0: ethernet@e000b000 {
+			compatible = "xlnx,zynq-gem", "cdns,gem";
+			reg = <0xe000b000 0x1000>;
+			status = "disabled";
+			interrupts = <0 22 4>;
+			clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
+			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gem1: ethernet@e000c000 {
+			compatible = "xlnx,zynq-gem", "cdns,gem";
+			reg = <0xe000c000 0x1000>;
+			status = "disabled";
+			interrupts = <0 45 4>;
+			clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
+			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		smcc: memory-controller@e000e000 {
+			compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+			reg = <0xe000e000 0x0001000>;
+			status = "disabled";
+			clock-names = "memclk", "apb_pclk";
+			clocks = <&clkc 11>, <&clkc 44>;
+			ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
+				  0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
+				  0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+			nfc0: nand-controller@0,0 {
+				compatible = "arm,pl353-nand-r2p1";
+				reg = <0 0 0x1000000>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		sdhci0: mmc@e0100000 {
+			compatible = "arasan,sdhci-8.9a";
+			status = "disabled";
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&clkc 21>, <&clkc 32>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 24 4>;
+			reg = <0xe0100000 0x1000>;
+		};
+
+		sdhci1: mmc@e0101000 {
+			compatible = "arasan,sdhci-8.9a";
+			status = "disabled";
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&clkc 22>, <&clkc 33>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 47 4>;
+			reg = <0xe0101000 0x1000>;
+		};
+
+		slcr: slcr@f8000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
+			reg = <0xF8000000 0x1000>;
+			ranges;
+			clkc: clkc@100 {
+				#clock-cells = <1>;
+				compatible = "xlnx,ps7-clkc";
+				fclk-enable = <0>;
+				clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
+						"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
+						"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
+						"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+						"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
+						"dma", "usb0_aper", "usb1_aper", "gem0_aper",
+						"gem1_aper", "sdio0_aper", "sdio1_aper",
+						"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
+						"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
+						"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
+						"dbg_trc", "dbg_apb";
+				reg = <0x100 0x100>;
+			};
+
+			rstc: rstc@200 {
+				compatible = "xlnx,zynq-reset";
+				reg = <0x200 0x48>;
+				#reset-cells = <1>;
+				syscon = <&slcr>;
+			};
+
+			pinctrl0: pinctrl@700 {
+				compatible = "xlnx,pinctrl-zynq";
+				reg = <0x700 0x200>;
+				syscon = <&slcr>;
+			};
+		};
+
+		dmac_s: dma-controller@f8003000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xf8003000 0x1000>;
+			interrupt-parent = <&intc>;
+			/*
+			 * interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
+			 * "dma4", "dma5", "dma6", "dma7";
+			 */
+			interrupts = <0 13 4>,
+			             <0 14 4>, <0 15 4>,
+			             <0 16 4>, <0 17 4>,
+			             <0 40 4>, <0 41 4>,
+			             <0 42 4>, <0 43 4>;
+			#dma-cells = <1>;
+			clocks = <&clkc 27>;
+			clock-names = "apb_pclk";
+		};
+
+		devcfg: devcfg@f8007000 {
+			compatible = "xlnx,zynq-devcfg-1.0";
+			reg = <0xf8007000 0x100>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 8 4>;
+			clocks = <&clkc 12>;
+			clock-names = "ref_clk";
+			syscon = <&slcr>;
+		};
+
+		global_timer: timer@f8f00200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0xf8f00200 0x20>;
+			interrupts = <1 11 0x301>;
+			interrupt-parent = <&intc>;
+			clocks = <&clkc 4>;
+		};
+
+		ttc0: timer@f8001000 {
+			interrupt-parent = <&intc>;
+			interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
+			compatible = "cdns,ttc";
+			clocks = <&clkc 6>;
+			reg = <0xF8001000 0x1000>;
+		};
+
+		ttc1: timer@f8002000 {
+			interrupt-parent = <&intc>;
+			interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
+			compatible = "cdns,ttc";
+			clocks = <&clkc 6>;
+			reg = <0xF8002000 0x1000>;
+		};
+
+		scutimer: timer@f8f00600 {
+			interrupt-parent = <&intc>;
+			interrupts = <1 13 0x301>;
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xf8f00600 0x20>;
+			clocks = <&clkc 4>;
+		};
+
+		usb0: usb@e0002000 {
+			compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
+			status = "disabled";
+			clocks = <&clkc 28>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 21 4>;
+			reg = <0xe0002000 0x1000>;
+			phy_type = "ulpi";
+		};
+
+		usb1: usb@e0003000 {
+			compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
+			status = "disabled";
+			clocks = <&clkc 29>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 44 4>;
+			reg = <0xe0003000 0x1000>;
+			phy_type = "ulpi";
+		};
+
+		watchdog0: watchdog@f8005000 {
+			clocks = <&clkc 45>;
+			compatible = "cdns,wdt-r1p2";
+			interrupt-parent = <&intc>;
+			interrupts = <0 9 1>;
+			reg = <0xf8005000 0x1000>;
+			timeout-sec = <10>;
+		};
+
+		etb@f8801000 {
+			compatible = "arm,coresight-etb10", "arm,primecell";
+			reg = <0xf8801000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			in-ports {
+				port {
+					etb_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port1>;
+					};
+				};
+			};
+		};
+
+		tpiu@f8803000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0xf8803000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			in-ports {
+				port {
+					tpiu_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port0>;
+					};
+				};
+			};
+		};
+
+		funnel@f8804000 {
+			compatible = "arm,coresight-static-funnel", "arm,primecell";
+			reg = <0xf8804000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+			/* funnel output ports */
+			out-ports {
+				port {
+					funnel_out_port: endpoint {
+						remote-endpoint =
+							<&replicator_in_port0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* funnel input ports */
+				port@0 {
+					reg = <0>;
+					funnel0_in_port0: endpoint {
+						remote-endpoint = <&ptm0_out_port>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel0_in_port1: endpoint {
+						remote-endpoint = <&ptm1_out_port>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel0_in_port2: endpoint {
+					};
+				};
+				/* The other input ports are not connect to anything */
+			};
+		};
+
+		ptm@f889c000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0xf889c000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			cpu = <&cpu0>;
+			out-ports {
+				port {
+					ptm0_out_port: endpoint {
+						remote-endpoint = <&funnel0_in_port0>;
+					};
+				};
+			};
+		};
+
+		ptm@f889d000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0xf889d000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			cpu = <&cpu1>;
+			out-ports {
+				port {
+					ptm1_out_port: endpoint {
+						remote-endpoint = <&funnel0_in_port1>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-cc108.dts b/arch/arm/boot/dts/xilinx/zynq-cc108.dts
new file mode 100644
index 000000000000..8b9ab9bba23b
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-cc108.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx CC108 board DTS
+ *
+ * (C) Copyright 2007-2018 Xilinx, Inc.
+ * (C) Copyright 2007-2013 Michal Simek
+ * (C) Copyright 2007-2012 PetaLogix Qld Pty Ltd
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx CC108 board";
+	compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	usb_phy1: phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@1 {
+		reg = <1>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&sdhci1 {
+	status = "okay";
+	broken-cd ;
+	wp-inverted ;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy1>;
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts b/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts
new file mode 100644
index 000000000000..53fa6dbfd8fd
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Michael Walle <michael@walle.cc>
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Ebang EBAZ4205";
+	compatible = "ebang,ebaz4205", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+	fclk-enable = <8>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "mii";
+	phy-handle = <&phy>;
+
+	/* PHY clock */
+	assigned-clocks = <&clkc 18>;
+	assigned-clock-rates = <25000000>;
+
+	phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&nfc0 {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+	};
+};
+
+&pinctrl0 {
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			groups = "gpio0_20_grp", "gpio0_32_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_20_grp", "gpio0_32_grp";
+			io-standard = <3>;
+			slew-rate = <0>;
+		};
+
+		conf-pull-up {
+			pins = "MIO20", "MIO32";
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			io-standard = <3>;
+			slew-rate = <0>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_34_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_34_grp";
+			io-standard = <3>;
+			slew-rate = <0>;
+			bias-high-impedance;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_4_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_4_grp";
+			io-standard = <3>;
+			slew-rate = <0>;
+		};
+
+		conf-rx {
+			pins = "MIO25";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO24";
+			bias-disable;
+		};
+	};
+};
+
+&smcc {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-microzed.dts b/arch/arm/boot/dts/xilinx/zynq-microzed.dts
new file mode 100644
index 000000000000..6ed84fb15902
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-microzed.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 - 2014 Xilinx
+ * Copyright (C) 2016 Jagan Teki <jteki@openedev.com>
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Avnet MicroZed board";
+	compatible = "avnet,zynq-microzed", "xlnx,zynq-microzed", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&pinctrl0 {
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO29", "MIO31", "MIO36";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+			       "MIO35", "MIO37", "MIO38", "MIO39";
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-parallella.dts b/arch/arm/boot/dts/xilinx/zynq-parallella.dts
new file mode 100644
index 000000000000..54592aeb92b9
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-parallella.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ *
+ * Derived from zynq-zed.dts:
+ *
+ *  Copyright (C) 2011 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ *  Copyright (C) 2013 Xilinx
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Adapteva Parallella board";
+	compatible = "adapteva,parallella", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&clkc {
+	fclk-enable = <0xf>;
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		/* Marvell 88E1318 */
+		compatible = "ethernet-phy-id0141.0e90",
+		             "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		device_type = "ethernet-phy";
+		marvell,reg-init = <0x3 0x10 0xff00 0x1e>,
+		                   <0x3 0x11 0xfff0 0xa>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	isl9305: isl9305@68 {
+		compatible = "isil,isl9305";
+		reg = <0x68>;
+
+		regulators {
+			dcd1 {
+				regulator-name = "VDD_DSP";
+				regulator-always-on;
+			};
+			dcd2 {
+				regulator-name = "1P35V";
+				regulator-always-on;
+			};
+			ldo1 {
+				regulator-name = "VDD_ADJ";
+			};
+			ldo2 {
+				regulator-name = "VDD_GPIO";
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&sdhci1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc702.dts b/arch/arm/boot/dts/xilinx/zynq-zc702.dts
new file mode 100644
index 000000000000..6efdbca9d3ef
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-zc702.dts
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Xilinx ZC702 board";
+	compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		serial0 = &uart1;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		switch-14 {
+			label = "sw14";
+			gpios = <&gpio0 12 0>;
+			linux,code = <108>; /* down */
+			wakeup-source;
+			autorepeat;
+		};
+		switch-13 {
+			label = "sw13";
+			gpios = <&gpio0 14 0>;
+			linux,code = <103>; /* up */
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-ds23 {
+			label = "ds23";
+			gpios = <&gpio0 10 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&amba {
+	ocm: sram@fffc0000 {
+		compatible = "mmio-sram";
+		reg = <0xfffc0000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffc0000 0x10000>;
+		ocm-sram@0 {
+			reg = <0x0 0x10000>;
+		};
+	};
+};
+
+&can0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio0 50 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio0 51 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	i2c-mux@74 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			si570: clock-generator@5d {
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				temperature-stability = <50>;
+				reg = <0x5d>;
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			adv7511: hdmi-tx@39 {
+				compatible = "adi,adv7511";
+				reg = <0x39>;
+				adi,input-depth = <8>;
+				adi,input-colorspace = "yuv422";
+				adi,input-clock = "1x";
+				adi,input-style = <3>;
+				adi,input-justification = "right";
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@54 {
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			gpio@21 {
+				compatible = "ti,tca6416";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			hwmon@34 {
+				compatible = "ti,ucd9248";
+				reg = <0x34>;
+			};
+			hwmon@35 {
+				compatible = "ti,ucd9248";
+				reg = <0x35>;
+			};
+			hwmon@36 {
+				compatible = "ti,ucd9248";
+				reg = <0x36>;
+			};
+		};
+	};
+};
+
+&pinctrl0 {
+	pinctrl_can0_default: can0-default {
+		mux {
+			function = "can0";
+			groups = "can0_9_grp";
+		};
+
+		conf {
+			groups = "can0_9_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO46";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO47";
+			bias-disable;
+		};
+	};
+
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7", "MIO8";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_50_grp", "gpio0_51_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_50_grp", "gpio0_51_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO29", "MIO31", "MIO36";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+			       "MIO35", "MIO37", "MIO38", "MIO39";
+			bias-disable;
+		};
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc706.dts b/arch/arm/boot/dts/xilinx/zynq-zc706.dts
new file mode 100644
index 000000000000..77943c16d33f
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-zc706.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC706 board";
+	compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		serial0 = &uart1;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+
+	i2c-mux@74 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			si570: clock-generator@5d {
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				temperature-stability = <50>;
+				reg = <0x5d>;
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			adv7511: hdmi-tx@39 {
+				compatible = "adi,adv7511";
+				reg = <0x39>;
+				adi,input-depth = <8>;
+				adi,input-colorspace = "yuv422";
+				adi,input-clock = "1x";
+				adi,input-style = <3>;
+				adi,input-justification = "evenly";
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@54 {
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			gpio@21 {
+				compatible = "ti,tca6416";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			ucd90120@65 {
+				compatible = "ti,ucd90120";
+				reg = <0x65>;
+			};
+		};
+	};
+};
+
+&pinctrl0 {
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			low-power-enable;
+			bias-disable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO46", "MIO47";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_14_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_14_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO29", "MIO31", "MIO36";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+			       "MIO35", "MIO37", "MIO38", "MIO39";
+			bias-disable;
+		};
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts
new file mode 100644
index 000000000000..0dd352289a45
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM010 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC770 XM010 board";
+	compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		serial0 = &uart1;
+		spi1 = &spi1;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+	flash@1 {
+		compatible = "sst25wf080", "jedec,spi-nor";
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "data";
+				reg = <0x0 0x100000>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts
new file mode 100644
index 000000000000..56732e8f6ca1
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM011 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC770 XM011 board";
+	compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
+
+	aliases {
+		i2c0 = &i2c1;
+		serial0 = &uart1;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	usb_phy1: phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy1>;
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts
new file mode 100644
index 000000000000..d2359b789eb8
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM012 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC770 XM012 board";
+	compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &uart1;
+		spi0 = &spi1;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom0: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom1: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts
new file mode 100644
index 000000000000..38d96adc870c
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM013 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC770 XM013 board";
+	compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem1;
+		i2c0 = &i2c1;
+		serial0 = &uart0;
+		spi1 = &spi0;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&gem1 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	si570: clock-generator@55 {
+		#clock-cells = <0>;
+		compatible = "silabs,si570";
+		temperature-stability = <50>;
+		reg = <0x55>;
+		factory-fout = <156250000>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+	eeprom: eeprom@2 {
+		compatible = "atmel,at25";
+		reg = <2>;
+		spi-max-frequency = <1000000>;
+		size = <8192>;
+		address-width = <16>;
+		pagesize = <32>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zed.dts b/arch/arm/boot/dts/xilinx/zynq-zed.dts
new file mode 100644
index 000000000000..6a5a93aa6552
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-zed.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Avnet ZedBoard board";
+	compatible = "avnet,zynq-zed", "xlnx,zynq-zed", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
new file mode 100644
index 000000000000..dfb1fbafe3aa
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com>
+ *  Copyright (C) 2017 Alexander Graf <agraf@suse.de>
+ *
+ *  Based on zynq-zed.dts which is:
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ *
+ */
+
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	compatible = "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+		serial1 = &uart0;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		usr-led1 {
+			label = "usr-led1";
+			gpios = <&gpio0 0x0 0x1>;
+			default-state = "off";
+		};
+
+		usr-led2 {
+			label = "usr-led2";
+			gpios = <&gpio0 0x9 0x1>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		key {
+			label = "K1";
+			gpios = <&gpio0 0x32 0x1>;
+			linux,code = <0x66>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&can0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	stlm75@49 {
+		status = "okay";
+		compatible = "lm75";
+		reg = <0x49>;
+	};
+
+	accelerometer@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+		interrupt-parent = <&intc>;
+		interrupts = <0x0 0x1e 0x4>;
+	};
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zturn-v5.dts b/arch/arm/boot/dts/xilinx/zynq-zturn-v5.dts
new file mode 100644
index 000000000000..536632a09a25
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-zturn-v5.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+/include/ "zynq-zturn-common.dtsi"
+
+/ {
+	model = "Zynq Z-Turn MYIR Board V5";
+	compatible = "myir,zynq-zturn-v5", "xlnx,zynq-7000";
+};
+
+&gem0 {
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0x3>;
+	};
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zturn.dts b/arch/arm/boot/dts/xilinx/zynq-zturn.dts
new file mode 100644
index 000000000000..620b24a25e06
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-zturn.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+/include/ "zynq-zturn-common.dtsi"
+
+/ {
+	model = "Zynq Z-Turn MYIR Board";
+	compatible = "myir,zynq-zturn", "xlnx,zynq-7000";
+};
+
+&gem0 {
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0x0>;
+	};
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts b/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts
new file mode 100644
index 000000000000..7b87e10d3953
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "zynq-7000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Digilent Zybo Z7 board";
+	compatible = "digilent,zynq-zybo-z7", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-ld4 {
+			label = "zynq-zybo-z7:green:ld4";
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usb_phy0: phy0 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zybo.dts b/arch/arm/boot/dts/xilinx/zynq-zybo.dts
new file mode 100644
index 000000000000..755f6f109d5a
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-zybo.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Digilent Zybo board";
+	compatible = "digilent,zynq-zybo", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio0 46 1>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <50000000>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};