Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

Pull "Amlogic 32-bit platforms: DT updates for v4.15"

- add SDIO MMC controller
- reserved memory fixes
- SoC info driver nodes
- enable USB host controller

* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson: add the SDIO MMC controller
  ARM: dts: meson8b: add reserved memory zone to fix silent freezes
  ARM: dts: meson: add SoC information nodes
  dt-bindings: Amlogic: add documentation for the SoC info register areas
  ARM: dts: meson: fixing USB support on Meson6, Meson8 and Meson8b
  ARM: dts: meson: enabling the USB Host controller on Odroid-C1/C1+ board

4 files changed, 78 insertions, 2 deletions

diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index cd6ad072e72c..290a183e87c5 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -80,6 +80,11 @@
 			#size-cells = <1>;
 			ranges = <0x0 0xc1100000 0x200000>;
 
+			assist: assist@7c00 {
+				compatible = "amlogic,meson-mx-assist", "syscon";
+				reg = <0x7c00 0x200>;
+			};
+
 			hwrng: rng@8100 {
 				compatible = "amlogic,meson-rng";
 				reg = <0x8100 0x8>;
@@ -160,6 +165,15 @@
 				status = "disabled";
 			};
 
+			sdio: mmc@8c20 {
+				compatible = "amlogic,meson-mx-sdio";
+				reg = <0x8c20 0x20>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			spifc: spi@8c80 {
 				compatible = "amlogic,meson6-spifc";
 				reg = <0x8c80 0x80>;
@@ -217,7 +231,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xc9040000 0x40000>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb0_phy>;
 			phy-names = "usb2-phy";
 			dr_mode = "host";
@@ -229,7 +243,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xc90c0000 0x40000>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb1_phy>;
 			phy-names = "usb2-phy";
 			dr_mode = "host";
@@ -252,5 +266,10 @@
 			#size-cells = <1>;
 			ranges = <0 0xd9000000 0x20000>;
 		};
+
+		bootrom: bootrom@d9040000 {
+			compatible = "amlogic,meson-mx-bootrom", "syscon";
+			reg = <0xd9040000 0x10000>;
+		};
 	};
 }; /* end of / */
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index b98d44fde6b6..e6abcc7a1084 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -173,6 +173,11 @@
 		reg = <0x8000 0x4>, <0x4000 0x460>;
 	};
 
+	analog_top: analog-top@81a8 {
+		compatible = "amlogic,meson8-analog-top", "syscon";
+		reg = <0x81a8 0x14>;
+	};
+
 	pwm_ef: pwm@86c0 {
 		compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
 		reg = <0x86c0 0x10>;
@@ -294,6 +299,12 @@
 	clock-names = "clkin", "core", "sana";
 };
 
+&sdio {
+	compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
+	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+	clock-names = "core", "clkin";
+};
+
 &spifc {
 	clocks = <&clkc CLKID_CLK81>;
 };
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index e50f1a1fdbc7..9ff6ca4e20d0 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -76,3 +76,26 @@
 	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
+
+&gpio_ao {
+	/*
+	 * WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal
+	 * to be turned high in order to be detected by the USB Controller.
+	 * This signal should be handled by a USB specific power sequence
+	 * in order to reset the Hub when USB bus is powered down.
+	 */
+	usb-hub {
+		gpio-hog;
+		gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index bc278da7df0d..283c68c6b1f4 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -83,6 +83,18 @@
 		};
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* 2 MiB reserved for Hardware ROM Firmware? */
+		hwrom@0 {
+			reg = <0x0 0x200000>;
+			no-map;
+		};
+	};
+
 	scu@c4300000 {
 		compatible = "arm,cortex-a5-scu";
 		reg = <0xc4300000 0x100>;
@@ -130,6 +142,11 @@
 		#reset-cells = <1>;
 	};
 
+	analog_top: analog-top@81a8 {
+		compatible = "amlogic,meson8b-analog-top", "syscon";
+		reg = <0x81a8 0x14>;
+	};
+
 	pwm_ef: pwm@86c0 {
 		compatible = "amlogic,meson8b-pwm";
 		reg = <0x86c0 0x10>;
@@ -190,6 +207,12 @@
 	clock-names = "clkin", "core", "sana";
 };
 
+&sdio {
+	compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
+	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+	clock-names = "core", "clkin";
+};
+
 &uart_AO {
 	clocks = <&clkc CLKID_CLK81>;
 };