Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "There are close to 800 indivudal changesets in this branch again,
  which feels like a lot. There are particularly many changes for the
  NVIDIA Tegra platform this time, in fact more than it has seen in the
  two years since the v4.9 merge window. Aside from this, it's been
  fairly normal, with lots of changes going into Renesas R-CAR, NXP
  i.MX, Allwinner Sunxi, Samsung Exynos, and TI OMAP.

  Most of the changes are for adding new features into existing boards,
  for brevity I'm only mentioning completely new machines and SoCs here.
  For the first time I think we have (slightly) more new 64-bit hardware
  than 32-bit:

  Two boards get added for TI OMAP: Moxa UC-2101 is an industrial
  computer, see https://www.moxa.com/product/UC-2100.htm; GTA04A5 is a
  minor variation of the motherboards of the GTA04 phone, see
  https://shop.goldelico.com/wiki.php?page=GTA04A5

  Clearfog is a nice little board for quad-core Marvell Armada 8040
  network processor, see
  https://www.solid-run.com/marvell-armada-family/clearfog-gt-8k/

  Two additional server boards come with the Aspeed baseboard management
  controllers: Stardragon4800 is an arm64 reference platform made by HXT
  (based on Qualcomm's server chips), and TiogaPass is an Open Compute
  mainboard with x86 CPUs. Both use the ARM11 based AST2500 chips in the
  BMC.

  NXP i.MX usually sees a lot of new boards each release. This time
  there we only add one minor variant: ConnectCore 6UL SBC Pro uses the
  same SoM design as the ConnectCore 6UL SBC Express added later.
  However, there is a new chip, the i.MX6ULZ, which is an even smaller
  variant of the i.MX6ULL, with features removed. There is also support
  for the reference board design, the i.MX6ULZ 14x14 EVK.

  A new Raspberry Pi variant gets added, this one is the CM3 compute
  module based on bcm2837, it was launched in early 2017 but only now
  added to the kernel, both as 32-bit and as 64-bit files, as we tend to
  do for Raspberry Pi.

  On the Allwinner side, everything is again about cheap development
  boards, usually of the "Fruit Pi" variety. The new ones this time are:
   - Orange Pi Zero Plus2: http://www.orangepi.org/OrangePiZeroPlus2/
   - Orange Pi One Plus: http://www.orangepi.org/OrangePiOneplus/
   - Pine64 LTS: https://www.pine64.org/?product=pine-a64-lts
   - Banana Pi M2+ H5: http://www.banana-pi.org/m2plus.html
  The last one of these is now a 64-bit version of the earlier Banana Pi
  M2+ H3, with the same board layout.

  Similarly, for Rockchips, get get another variant of the 32-bit Asus
  Tinker board, the model 'S' based on rk3288, and three now boards
  based on the popular RK3399 chip:
   - ROC-RK3399-PC: https://libre.computer/products/boards/roc-rk3399-pc/
   - Rock960: https://www.96boards.org/product/rock960/
   - RockPro64: https://www.pine64.org/?page_id=61454
  These are all quite powerful boards with lots of RAM and I/O, and the
  RK3399 is the same chip used in several Chromebooks. Finally, we get
  support for the PX30 (aka rk3326) chip, which is based on the low-end
  64-bit Cortex-A35 CPU core. So far, only the evaluation board is
  supported.

  One more Banana Pi is added with a Mediatek chip: Banana Pi R64 is
  based on the MT7622 WiFi router platform, and the first product I've
  seen with a 64-bit Mediatek chip in that market:
  http://www.banana-pi.org/r64.html

  For HiSilicon, we gain support for the Hi3670 SoC and HiKey 370
  development board, which are similar to the Hi3660 and Hikey 360
  respectively, but add support for an NPU.

  Amlogic gets initial support for the Meson-G12A chip (S905D2), another
  quad-core Cortex-A53 SoC, and its evaluation platform. On the 32-bit
  side, we gain support for an actual end-user product, the Endless
  Computers Endless Mini based on Meson8b (S805), see
  https://endlessos.com/computers/

  Qualcomm adds support for their MSM8998 SoC and evaluation platform.
  This chip is commonly known as the Snapdragon 835, and is used in
  high-end phones as well as low-end laptops.

  For Renesas, a very bare support for the r8a774a1 (RZ/G2M) is added,
  but no boards for this one. However, we do add boards for the
  previously added r8a77965 (R-Car M3-N): the M3NULCB Kingfisher and the
  M3NULCB Starter Kit Pro.

  While we have lots of DT changes for NVIDIA to update the existing
  files, the only board that gets added is the Toradex Colibri T20 on
  Colibri Evaluation Board for the old Tegra2.

  Synaptics add support for their AS370 SoC, which is part of the
  (formerly Marvell) Berlin line of set-top-box chips used e.g. in the
  various Google Chromecast. Only the .dtsi gets added at this point, no
  actual machines"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (721 commits)
  ARM: dts: socfgpa: remove ethernet aliases from dtsi
  arm64: dts: stratix10: add ethernet aliases
  dt-bindings: mediatek: Add bindig for MT7623 IOMMU and SMI
  dt-bindings: mediatek: Add JPEG Decoder binding for MT7623
  dt-bindings: iommu: mediatek: Add binding for MT7623
  dt-bindings: clock: mediatek: add support for MT7623
  ARM: dts: mvebu: armada-385-db-88f6820-amc: auto-detect nand ECC properites
  ARM: dts: da850-lego-ev3: slow down A/DC as much as possible
  ARM: dts: da850-evm: Enable tca6416 on baseboard
  arm64: dts: uniphier: Add USB2 PHY nodes
  arm64: dts: uniphier: Add USB3 controller nodes
  ARM: dts: uniphier: Add USB2 PHY nodes
  ARM: dts: uniphier: Add USB3 controller nodes
  arm64: dts: meson-axg: s400: disable emmc
  arm64: dts: meson-axg: s400: add missing emmc pwrseq
  arm64: dts: clearfog-gt-8k: add PCIe slot description
  ARM: dts: at91: sama5d4_xplained: even nand memory partitions
  ARM: dts: at91: sama5d3_xplained: even nand memory partitions
  ARM: dts: at91: at91sam9x5cm: even nand memory partitions
  ARM: dts: at91: sama5d2_ptc_ek: fix bootloader env offsets
  ...

320 files changed, 12134 insertions, 3728 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b5bd3de87c33..b0e966d625b9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2836-rpi-2-b.dtb \
 	bcm2837-rpi-3-b.dtb \
 	bcm2837-rpi-3-b-plus.dtb \
+	bcm2837-rpi-cm3-io3.dtb \
 	bcm2835-rpi-zero.dtb \
 	bcm2835-rpi-zero-w.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
@@ -321,6 +322,7 @@ dtb-$(CONFIG_MACH_MESON6) += \
 	meson6-atv1200.dtb
 dtb-$(CONFIG_MACH_MESON8) += \
 	meson8-minix-neo-x8.dtb \
+	meson8b-ec100.dtb \
 	meson8b-mxq.dtb \
 	meson8b-odroidc1.dtb \
 	meson8m2-mxiii-plus.dtb
@@ -548,6 +550,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
 dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-14x14-evk.dtb \
 	imx6ul-ccimx6ulsbcexpress.dtb \
+	imx6ul-ccimx6ulsbcpro.dtb \
 	imx6ul-geam.dtb \
 	imx6ul-isiot-emmc.dtb \
 	imx6ul-isiot-nand.dtb \
@@ -559,7 +562,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-tx6ul-mainboard.dtb \
 	imx6ull-14x14-evk.dtb \
 	imx6ull-colibri-eval-v3.dtb \
-	imx6ull-colibri-wifi-eval-v3.dtb
+	imx6ull-colibri-wifi-eval-v3.dtb \
+	imx6ulz-14x14-evk.dtb
 dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-cl-som-imx7.dtb \
 	imx7d-colibri-emmc-eval-v3.dtb \
@@ -649,6 +653,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	omap3-gta04a3.dtb \
 	omap3-gta04a4.dtb \
 	omap3-gta04a5.dtb \
+	omap3-gta04a5one.dtb \
 	omap3-ha.dtb \
 	omap3-ha-lcd.dtb \
 	omap3-igep0020.dtb \
@@ -706,6 +711,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-evmsk.dtb \
 	am335x-icev2.dtb \
 	am335x-lxm.dtb \
+	am335x-moxa-uc-2101.dtb \
 	am335x-moxa-uc-8100-me-t.dtb \
 	am335x-nano.dtb \
 	am335x-pdu001.dtb \
@@ -864,6 +870,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3288-r89.dtb \
 	rk3288-rock2-square.dtb \
 	rk3288-tinker.dtb \
+	rk3288-tinker-s.dtb \
 	rk3288-veyron-brain.dtb \
 	rk3288-veyron-jaq.dtb \
 	rk3288-veyron-jerry.dtb \
@@ -892,7 +899,7 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \
 	socfpga_arria10_socdk_sdmmc.dtb \
 	socfpga_cyclone5_mcvevk.dtb \
 	socfpga_cyclone5_socdk.dtb \
-	socfpga_cyclone5_de0_sockit.dtb \
+	socfpga_cyclone5_de0_nano_soc.dtb \
 	socfpga_cyclone5_sockit.dtb \
 	socfpga_cyclone5_socrates.dtb \
 	socfpga_cyclone5_sodia.dtb \
@@ -1033,6 +1040,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-h2-plus-orangepi-r1.dtb \
 	sun8i-h2-plus-orangepi-zero.dtb \
 	sun8i-h3-bananapi-m2-plus.dtb \
+	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
 	sun8i-h3-beelink-x2.dtb \
 	sun8i-h3-libretech-all-h3-cc.dtb \
 	sun8i-h3-nanopi-m1.dtb	\
@@ -1046,6 +1054,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-h3-orangepi-pc-plus.dtb \
 	sun8i-h3-orangepi-plus.dtb \
 	sun8i-h3-orangepi-plus2e.dtb \
+	sun8i-h3-orangepi-zero-plus2.dtb \
 	sun8i-r16-bananapi-m2m.dtb \
 	sun8i-r16-nintendo-nes-classic.dtb \
 	sun8i-r16-nintendo-super-nes-classic.dtb \
@@ -1061,6 +1070,7 @@ dtb-$(CONFIG_ARCH_TANGO) += \
 	tango4-vantage-1172.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
 	tegra20-harmony.dtb \
+	tegra20-colibri-eval-v3.dtb \
 	tegra20-colibri-iris.dtb \
 	tegra20-medcom-wide.dtb \
 	tegra20-paz00.dtb \
@@ -1071,6 +1081,7 @@ dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
 	tegra20-ventana.dtb
 dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
 	tegra30-apalis-eval.dtb \
+	tegra30-apalis-v1.1-eval.dtb \
 	tegra30-beaver.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
@@ -1149,6 +1160,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
 dtb-$(CONFIG_MACH_ARMADA_375) += \
 	armada-375-db.dtb
 dtb-$(CONFIG_MACH_ARMADA_38X) += \
+	armada-385-db-88f6820-amc.dtb \
 	armada-385-db-ap.dtb \
 	armada-385-linksys-caiman.dtb \
 	armada-385-linksys-cobra.dtb \
@@ -1199,6 +1211,8 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
 dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-ast2500-evb.dtb \
 	aspeed-bmc-arm-centriq2400-rep.dtb \
+	aspeed-bmc-arm-stardragon4800-rep2.dtb \
+	aspeed-bmc-facebook-tiogapass.dtb \
 	aspeed-bmc-intel-s2600wf.dtb \
 	aspeed-bmc-opp-lanyang.dtb \
 	aspeed-bmc-opp-palmetto.dtb \
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 73b514dddf65..9e5e75ea87f5 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -379,7 +379,7 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
 };
 
@@ -396,6 +396,10 @@
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &mmc1 {
diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
index 325daae40278..e543c2bee8c2 100644
--- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi
+++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include <dt-bindings/display/tda998x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 &ldo3_reg {
 	regulator-min-microvolt = <1800000>;
@@ -88,9 +89,11 @@
 };
 
 &i2c0 {
-	tda19988: tda19988 {
+	tda19988: tda19988@70 {
 		compatible = "nxp,tda998x";
 		reg = <0x70>;
+		nxp,calib-gpios = <&gpio1 25 0>;
+		interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
 
 		pinctrl-names = "default", "off";
 		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
index 59431b235944..9c2a947aacf5 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -140,10 +140,14 @@
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
 };
 
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index 947c81b7aaaf..c4d3e1f1a95e 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -486,10 +486,14 @@ status = "okay";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 };
 
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index c87d01297a01..98ec9c3e49ba 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -713,6 +713,7 @@
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
+	slaves = <1>;
 };
 
 &davinci_mdio {
@@ -720,15 +721,14 @@
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
-};
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 };
 
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index bf1a40e45c97..245868f58fe3 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -639,16 +639,24 @@
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <2>;
 };
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index a5769a8f5fc8..55b4c94cfafb 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -102,15 +102,24 @@
 
 &davinci_mdio {
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
+
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
 };
 
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index 1d6c6fa703e4..481edcfaf121 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -317,13 +317,13 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <5>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <2>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <4>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <3>;
 };
@@ -345,6 +345,14 @@
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@5 {
+		reg = <5>;
+	};
+
+	ethphy1: ethernet-phy@4 {
+		reg = <4>;
+	};
 };
 
 &mmc1 {
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
new file mode 100644
index 000000000000..14f781953475
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
+ *
+ * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
+ *          Wes Huang (黃淵河) <wes.huang@moxa.com>
+ *          Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
+ */
+
+#include "am33xx.dtsi"
+
+/ {
+	vbat: vbat-regulator {
+		compatible = "regulator-fixed";
+	};
+
+	/* Power supply provides a fixed 3.3V @3A */
+	vmmcsd_fixed: vmmcsd-regulator {
+	      compatible = "regulator-fixed";
+	      regulator-name = "vmmcsd_fixed";
+	      regulator-min-microvolt = <3300000>;
+	      regulator-max-microvolt = <3300000>;
+	      regulator-boot-on;
+	};
+
+	buttons: push_button {
+		compatible = "gpio-keys";
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	push_button_pins: pinmux_push_button {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_hsync.gpio2_23 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	mmc1_pins_default: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			/* eMMC */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad12.mmc1_dat0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad13.mmc1_dat1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad14.mmc1_dat2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad15.mmc1_dat3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad8.mmc1_dat4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad9.mmc1_dat5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad10.mmc1_dat6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad11.mmc1_dat7 */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+		>;
+	};
+
+	spi0_pins: pinmux_spi0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0)	 /* spi0_sclk.spi0_sclk */
+			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0)	 /* spi0_cs0.spi0_cs0 */
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0)	 /* spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)	 /* spi0_d1.spi0_d1 */
+		>;
+	};
+};
+
+&uart0 {
+	/* Console */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	rtc_wdt: rtc_wdt@68 {
+		compatible = "dallas,ds1374";
+		reg = <0x68>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+/* Power */
+&vbat {
+	regulator-name = "vbat";
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+};
+
+&mac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_default>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&davinci_mdio_default>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	status = "okay";
+};
+
+&cpsw_emac1 {
+	status = "okay";
+};
+
+&phy_sel {
+	reg= <0x44e10650 0xf5>;
+	rmii-clock-ext;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0 {
+	ti,no-reset-on-init;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	pinctrl-0 = <&mmc1_pins_default>;
+	ti,non-removable;
+	status = "okay";
+};
+
+&buttons {
+	pinctrl-names = "default";
+	pinctrl-0 = <&push_button_pins>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	button@0 {
+		label = "push_button";
+		linux,code = <0x100>;
+		gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* SPI Busses */
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+
+	m25p80@0 {
+		compatible = "mx25l6405d";
+		spi-max-frequency = <40000000>;
+
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* reg : The partition's offset and size within the mtd bank. */
+			partitions@0 {
+				label = "MLO";
+				reg = <0x0 0x80000>;
+			};
+
+			partitions@1 {
+				label = "U-Boot";
+				reg = <0x80000 0x100000>;
+			};
+
+			partitions@2 {
+				label = "U-Boot Env";
+				reg = <0x180000 0x40000>;
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+
+	tpm_spi_tis@0 {
+		compatible = "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <500000>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
new file mode 100644
index 000000000000..48aee6de4cdb
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
+ *
+ * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
+ *          Wes Huang (黃淵河) <wes.huang@moxa.com>
+ *          Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
+ */
+
+/dts-v1/;
+
+#include "am335x-moxa-uc-2100-common.dtsi"
+
+/ {
+	model = "Moxa UC-2101";
+	compatible = "moxa,uc-2101", "ti,am33xx";
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "UC2100:GREEN:USER";
+			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mii1_refclk.rmii1_refclk */
+		>;
+	};
+
+	spi1_pins: pinmux_spi1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4)	 /* ecap0_in_pwm0_out.spi1_sclk */
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE4)	 /* uart1_ctsn.spi1_cs0 */
+			AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4)	 /* uart0_ctsn.spi1_d0 */
+			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4)	 /* uart0_rtsn.spi1_d1 */
+		>;
+	};
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&cpsw_emac0 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rmii";
+};
+
+&cpsw_emac1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
index f82233cd18e0..5a58efc0c874 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
@@ -422,18 +422,26 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+
+	ethphy1: ethernet-phy@5 {
+		reg = <5>;
+	};
 };
 
 &cpsw_emac0 {
 	status = "okay";
-	phy_id = <&davinci_mdio>, <4>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	status = "okay";
-	phy_id = <&davinci_mdio>, <5>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <2>;
 };
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index 946d7069f417..9c9143ed4003 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -380,16 +380,24 @@
 
 &davinci_mdio {
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "mii";
 	dual_emac_res_vlan = <2>;
 };
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
index 4d969013f99a..85cd1d0a73ca 100644
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
@@ -161,7 +161,7 @@
 		invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/
 	};
 
-	bmp280: pressure@78 {
+	bmp280: pressure@76 {
 		compatible = "bosch,bmp280";
 		reg = <0x76>;
 	};
@@ -424,7 +424,7 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <4>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 };
 
@@ -441,6 +441,10 @@
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@4 {
+		reg = <4>;
+	};
 };
 
 &mmc1 {
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
index 1ad530a39a95..6dd9d487aaeb 100644
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -373,7 +373,7 @@
 	ti,pindir-d0-out-d1-in;
 	status = "okay";
 
-	cfaf240320a032t {
+	display-controller@0 {
 		compatible = "orisetech,otm3225a";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
@@ -533,16 +533,24 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "mii";
 	dual_emac_res_vlan = <2>;
 };
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 9fb7426070ce..6be79b8349ac 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -265,13 +265,13 @@
 /* Ethernet */
 &cpsw_emac0 {
 	status = "okay";
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 
 &cpsw_emac1 {
 	status = "okay";
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 };
 
@@ -279,6 +279,14 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio_pins>;
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &mac {
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
index 7b8e7417a11e..35527fdf56cc 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -103,10 +103,14 @@
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 };
 
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index 4f6a286ea293..1d925ed2b102 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -206,7 +206,6 @@
 	status = "okay";
 	slaves = <1>;
 	cpsw_emac0: slave@4a100200  {
-		phy_id = <&davinci_mdio>, <0>;
 		phy-mode = "mii";
 		phy-handle = <&ethernetphy0>;
 	};
diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/am3517-evm-ui.dtsi
new file mode 100644
index 000000000000..e841918c1c26
--- /dev/null
+++ b/arch/arm/boot/dts/am3517-evm-ui.dtsi
@@ -0,0 +1,220 @@
+/*
+ * Copyright (C) 2018 Logic PD, Inc - http://www.logicpd.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	codec1 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tlv320aic23-hifi";
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic In",
+			"Line", "Line In",
+			"Line", "Line Out";
+
+		simple-audio-card,routing =
+			"Line Out", "LOUT",
+			"Line Out", "ROUT",
+			"LLINEIN", "Line In",
+			"RLINEIN", "Line In",
+			"MICIN", "Mic In";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcbsp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic23_1>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+
+	codec2 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tlv320aic23-hifi";
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic In",
+			"Line", "Line In",
+			"Line", "Line Out";
+
+		simple-audio-card,routing =
+			"Line Out", "LOUT",
+			"Line Out", "ROUT",
+			"LLINEIN", "Line In",
+			"RLINEIN", "Line In",
+			"MICIN", "Mic In";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master2>;
+		simple-audio-card,frame-master = <&sound_master2>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcbsp2>;
+		};
+
+		sound_master2: simple-audio-card,codec {
+			sound-dai = <&tlv320aic23_2>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+
+	expander-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		record {
+			label = "Record";
+			/* linux,code = <BTN_0>; */
+			gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>;
+		};
+
+		play {
+			label = "Play";
+			linux,code = <KEY_PLAY>;
+			gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>;
+		};
+
+		Stop {
+			label = "Stop";
+			linux,code = <KEY_STOP>;
+			gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>;
+		};
+
+		fwd {
+			label = "FWD";
+			linux,code = <KEY_FASTFORWARD>;
+			gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>;
+		};
+
+		rwd {
+			label = "RWD";
+			linux,code = <KEY_REWIND>;
+			gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>;
+		};
+
+		shift {
+			label = "Shift";
+			linux,code = <KEY_LEFTSHIFT>;
+			gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>;
+		};
+
+		Mode {
+			label = "Mode";
+			linux,code = <BTN_MODE>;
+			gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>;
+		};
+
+		Menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>;
+		};
+
+		Up {
+			label = "Up";
+			linux,code = <KEY_UP>;
+			gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>;
+		};
+
+		Down {
+			label = "Down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c2 {
+	/* Audio codecs */
+	tlv320aic23_1: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+
+	tlv320aic23_2: codec@1b {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1b>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+};
+
+&i2c3 {
+	/* Audio codecs */
+	tlv320aic23_3: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+
+	/* GPIO Expanders */
+	tca6416_2: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vdd_io_reg>;
+	};
+
+	tca6416_3: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vdd_io_reg>;
+	};
+
+	/* TVP5146 Analog Video decoder input */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&mcbsp1 {
+	status = "ok";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 {
+	status = "ok";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&omap3_pmx_core {
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dx */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dr */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0)	/* mcbsp_clks.mcbsp1_fsx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0)	/* mcbsp1_clkx.mcbsp1_clkx */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2.dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx.mcbsp2_dx */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index 1d158cfda15f..d4d33cd7adad 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -9,6 +9,7 @@
 
 #include "am3517.dtsi"
 #include "am3517-som.dtsi"
+#include "am3517-evm-ui.dtsi"
 #include <dt-bindings/input/input.h>
 
 / {
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index d4b7c59eec68..a68e89dae7a1 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -1101,7 +1101,7 @@
 			};
 		};
 
-		qspi: qspi@47900000 {
+		qspi: spi@47900000 {
 			compatible = "ti,am4372-qspi";
 			reg = <0x47900000 0x100>,
 			      <0x30000000 0x4000000>;
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
index bff5abe69bdb..4fcf647815a2 100644
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -339,16 +339,24 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <2>;
 };
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 5b97c20c5ed4..601bf4daaeb7 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -831,10 +831,14 @@
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 20132477a871..bb285409473e 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -499,10 +499,14 @@
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index d4be3fd0b6f4..088cba09d34d 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -799,16 +799,24 @@
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+
+	ethphy1: ethernet-phy@5 {
+		reg = <5>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <4>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <5>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <2>;
 };
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 6502d3397653..4ea753b3ee43 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -575,10 +575,14 @@
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@16 {
+		reg = <16>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <16>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
 };
 
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index d9a2049a1ea8..6432309b39e3 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -64,6 +64,82 @@
 			linux,default-trigger = "mmc0";
 		};
 	};
+
+	idk-leds {
+		status = "disabled";
+		compatible = "gpio-leds";
+		red0-led {
+			label = "idk:red0";
+			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green0-led {
+			label = "idk:green0";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue0-led {
+			label = "idk:blue0";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red1-led {
+			label = "idk:red1";
+			gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green1-led {
+			label = "idk:green1";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue1-led {
+			label = "idk:blue1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red2-led {
+			label = "idk:red2";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green2-led {
+			label = "idk:green2";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue2-led {
+			label = "idk:blue2";
+			gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red3-led {
+			label = "idk:red3";
+			gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green3-led {
+			label = "idk:green3";
+			gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue3-led {
+			label = "idk:blue3";
+			gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
 };
 
 &extcon_usb2 {
@@ -71,6 +147,10 @@
 	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
 };
 
+&sn65hvs882 {
+	load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+};
+
 &mailbox5 {
 	status = "okay";
 	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
@@ -114,7 +194,3 @@
 	pinctrl-1 = <&mmc2_pins_hs>;
 	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
 };
-
-&cpu0 {
-	vdd-supply = <&smps12_reg>;
-};
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
index 784639ddf451..a064f13b3880 100644
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -55,6 +55,82 @@
 			linux,default-trigger = "mmc0";
 		};
 	};
+
+	idk-leds {
+		status = "disabled";
+		compatible = "gpio-leds";
+		red0-led {
+			label = "idk:red0";
+			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green0-led {
+			label = "idk:green0";
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue0-led {
+			label = "idk:blue0";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red1-led {
+			label = "idk:red1";
+			gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green1-led {
+			label = "idk:green1";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue1-led {
+			label = "idk:blue1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red2-led {
+			label = "idk:red2";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green2-led {
+			label = "idk:green2";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue2-led {
+			label = "idk:blue2";
+			gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red3-led {
+			label = "idk:red3";
+			gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green3-led {
+			label = "idk:green3";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue3-led {
+			label = "idk:blue3";
+			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
 };
 
 &extcon_usb2 {
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 3ef9111d0e8b..b2fb6e097be7 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -36,7 +36,3 @@
 	pinctrl-1 = <&mmc2_pins_hs>;
 	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
 };
-
-&cpu0 {
-	vdd-supply = <&smps12_reg>;
-};
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 203266f88480..4748ce8747ad 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -518,7 +518,7 @@
 	};
 
 	/* touch controller */
-	ads7846@0 {
+	touchscreen@1 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ads7846_pins>;
 
@@ -558,13 +558,13 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <0>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <1>;
 };
@@ -573,6 +573,14 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_pins_default>;
 	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &usb2_phy1 {
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index c9063ffca524..f7bd26458915 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -372,17 +372,27 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <2>;
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &usb2_phy1 {
 	phy-supply = <&ldousb_reg>;
 };
@@ -478,3 +488,7 @@
 		};
 	};
 };
+
+&cpu0 {
+	vdd-supply = <&smps12_reg>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index a917cf8825ca..0e4c7c4c8c09 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -371,7 +371,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		ssp: ssp@1000d000 {
+		ssp: spi@1000d000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index f935b72d3d96..f2a1d25eb6cf 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -380,7 +380,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		pb1176_ssp: ssp@1010b000 {
+		pb1176_ssp: spi@1010b000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1010b000 0x1000>;
 			interrupt-parent = <&intc_dc1176>;
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
index 36203288de42..7f9cbdf33a51 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -523,7 +523,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		ssp@1000d000 {
+		spi@1000d000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			interrupt-parent = <&intc_pb11mp>;
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index 10868ba3277f..a5676697ff3b 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -362,7 +362,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		ssp: ssp@1000d000 {
+		ssp: spi@1000d000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
diff --git a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
new file mode 100644
index 000000000000..7881df3b28a0
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 385 AMC board
+ * (DB-88F6820-AMC)
+ *
+ * Copyright (C) 2017 Allied Telesis Labs
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 385 AMC";
+	compatible = "marvell,a385-db-amc", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		spi1 = &spi1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&uart0 {
+	/*
+	 * Exported on the micro USB connector CON3
+	 * through an FTDI
+	 */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+
+&eth0 {
+	pinctrl-names = "default";
+	/*
+	 * The Reference Clock 0 is used to provide a
+	 * clock to the PHY
+	 */
+	pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "sgmii";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy1: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x40000000>;
+				label = "user";
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	/* Port 0, Lane 0 */
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x00100000>;
+				label = "u-boot";
+			};
+			partition@100000 {
+				reg = <0x00100000 0x00040000>;
+				label = "u-boot-env";
+			};
+		};
+	};
+};
+
+&refclk {
+	clock-frequency = <20000000>;
+};
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi
index 7c6ad2afb094..1b0d0680c8b6 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
@@ -48,7 +48,7 @@
 					     &clearfog_sdhci_cd_pins>;
 				pinctrl-names = "default";
 				status = "okay";
-				vmmc = <&reg_3p3v>;
+				vmmc-supply = <&reg_3p3v>;
 				wp-inverted;
 			};
 
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index 8d708cc22495..59753470cd34 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -189,7 +189,7 @@
 				};
 			};
 
-			nand: nand@d0000 {
+			nand_controller: nand-controller@d0000 {
 				clocks = <&dfx_coredivclk 0>;
 			};
 
@@ -243,7 +243,7 @@
 			ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
 
 			pp0: packet-processor@0 {
-				compatible = "marvell,prestera-98dx3236";
+				compatible = "marvell,prestera-98dx3236", "marvell,prestera";
 				reg = <0 0x4000000>;
 				interrupts = <33>, <34>, <35>;
 				dfx = <&dfx>;
diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
index 2f5fc67dd6dc..1d9d8a8ea60c 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
@@ -35,5 +35,5 @@
 };
 
 &pp0 {
-	compatible = "marvell,prestera-98dx3336";
+	compatible = "marvell,prestera-98dx3336", "marvell,prestera";
 };
diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
index 7a9e8839880b..48ffdc72bfc7 100644
--- a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
@@ -49,6 +49,6 @@
 };
 
 &pp0 {
-	compatible = "marvell,prestera-98dx4251";
+	compatible = "marvell,prestera-98dx4251", "marvell,prestera";
 	interrupts = <33>, <34>, <35>, <36>;
 };
diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
index f42fc6118b7c..8a3aa616bbd0 100644
--- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
+++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
@@ -68,14 +68,18 @@
 	status = "okay";
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
-	label = "pxa3xx_nand-0";
-	num-cs = <1>;
-	marvell,nand-keep-config;
-	nand-on-flash-bbt;
-	nand-ecc-strength = <4>;
-	nand-ecc-step-size = <512>;
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+	};
 };
 
 &sdio {
diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
index 8432f517e346..df048050615f 100644
--- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
+++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
@@ -67,14 +67,18 @@
 	status = "okay";
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
-	label = "pxa3xx_nand-0";
-	num-cs = <1>;
-	marvell,nand-keep-config;
-	nand-on-flash-bbt;
-	nand-ecc-strength = <4>;
-	nand-ecc-step-size = <512>;
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+	};
 };
 
 &spi0 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
new file mode 100644
index 000000000000..bdfd8c9f3a7c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HXT StarDragon 4800 REP2 AST2520";
+	compatible = "hxt,stardragon4800-rep2-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+						<&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		system_fault1 {
+			label = "System_fault1";
+			gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		system_fault2 {
+			label = "System_fault2";
+			gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+			&pinctrl_spi2miso_default
+			&pinctrl_spi2mosi_default
+			&pinctrl_spi2cs0_default>;
+};
+
+&uart3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+	current-speed = <115200>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default>;
+	use-ncsi;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp421@1e {
+		compatible = "ti,tmp421";
+		reg = <0x1e>;
+	};
+	tmp421@2a {
+		compatible = "ti,tmp421";
+		reg = <0x2a>;
+	};
+	tmp421@1c {
+		compatible = "ti,tmp421";
+		reg = <0x1c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	nvt210@4c {
+		compatible = "nvt210";
+		reg = <0x4c>;
+	};
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca9641@70 {
+		compatible = "nxp,pca9641";
+		reg = <0x70>;
+		i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+			dps650ab@58 {
+				compatible = "dps650ab";
+				reg = <0x58>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&gpio {
+	pin_gpio_c7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BIOS_SPI_MUX_S";
+	};
+	pin_gpio_d1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PHY2_RESET_N";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
new file mode 100644
index 000000000000..f8e7b71af7e6
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+// Author: Vijay Khemka <vijaykhemka@fb.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Facebook TiogaPass BMC";
+	compatible = "facebook,tiogapass-bmc", "aspeed,ast2500";
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart1 {
+	// Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+};
+
+&i2c0 {
+	status = "okay";
+	//Airmax Conn B, CPU0 PIROM, CPU1 PIROM
+};
+
+&i2c1 {
+	status = "okay";
+	//X24 Riser
+};
+
+&i2c2 {
+	status = "okay";
+	// Mezz Management SMBus
+};
+
+&i2c3 {
+	status = "okay";
+	// SMBus to Board ID EEPROM
+};
+
+&i2c4 {
+	status = "okay";
+	// BMC Debug Header
+};
+
+&i2c5 {
+	status = "okay";
+	// CPU Voltage regulators
+};
+
+&i2c6 {
+	status = "okay";
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	//HSC, AirMax Conn A
+};
+
+&i2c8 {
+	status = "okay";
+	//Mezz Sensor SMBus
+};
+
+&i2c9 {
+	status = "okay";
+	//USB Debug Connector
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
index 76aa6ea1f988..385c0f4b69ee 100644
--- a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
@@ -7,6 +7,25 @@
 	model = "Quanta Q71L BMC";
 	compatible = "quanta,q71l-bmc", "aspeed,ast2400";
 
+	aliases {
+		i2c14 = &i2c_pcie2;
+		i2c15 = &i2c_pcie3;
+		i2c16 = &i2c_pcie6;
+		i2c17 = &i2c_pcie7;
+		i2c18 = &i2c_pcie1;
+		i2c19 = &i2c_pcie4;
+		i2c20 = &i2c_pcie5;
+		i2c21 = &i2c_pcie8;
+		i2c22 = &i2c_pcie9;
+		i2c23 = &i2c_pcie10;
+		i2c24 = &i2c_ssd1;
+		i2c25 = &i2c_ssd2;
+		i2c26 = &i2c_psu4;
+		i2c27 = &i2c_psu1;
+		i2c28 = &i2c_psu3;
+		i2c29 = &i2c_psu2;
+	};
+
 	chosen {
 		stdout-path = &uart5;
 		bootargs = "console=ttyS4,115200 earlyprintk";
@@ -93,6 +112,10 @@
 			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
 };
 
+&ibt {
+	status = "okay";
+};
+
 &lpc_snoop {
 	status = "okay";
 	snoop-ports = <0x80>;
@@ -299,24 +322,44 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+
+			psu@59 {
+				compatible = "pmbus";
+				reg = <0x59>;
+			};
 		};
 
 		i2c_psu1: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
+
+			psu@58 {
+				compatible = "pmbus";
+				reg = <0x58>;
+			};
 		};
 
 		i2c_psu3: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
+
+			psu@58 {
+				compatible = "pmbus";
+				reg = <0x58>;
+			};
 		};
 
 		i2c_psu2: i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
+
+			psu@59 {
+				compatible = "pmbus";
+				reg = <0x59>;
+			};
 		};
 	};
 
@@ -345,6 +388,10 @@
 	status = "okay";
 };
 
+&adc {
+	status = "okay";
+};
+
 &pwm_tacho {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b23a983f95a5..69f6b9d2e7e7 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -350,7 +350,7 @@
 				status = "disabled";
 			};
 
-			i2c: i2c@1e78a000 {
+			i2c: bus@1e78a000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 87fdc146ff52..d107459fc0f8 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -410,7 +410,7 @@
 				status = "disabled";
 			};
 
-			i2c: i2c@1e78a000 {
+			i2c: bus@1e78a000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
index bb86f17ed5ed..21876da7c442 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
@@ -70,9 +70,9 @@
 &i2c1 {
 	status = "okay";
 
-	eeprom@87 {
+	eeprom@57 {
 		compatible = "giantec,gt24c32a", "atmel,24c32";
-		reg = <87>;
+		reg = <0x57>;
 		pagesize = <32>;
 	};
 };
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
index 4b9176dc5d02..df0f0cc575c1 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
@@ -59,9 +59,9 @@
 &i2c1 {
 	status = "okay";
 
-	ft5426@56 {
+	ft5426@38 {
 		compatible = "focaltech,ft5426", "edt,edt-ft5406";
-		reg = <56>;
+		reg = <0x38>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_lcd_ctp_int>;
 
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index af9f38456d04..911d2c7c1500 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -16,46 +16,6 @@
 	compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
 		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
 
-	ahb {
-		apb {
-			pinctrl@fffff200 {
-				nattis {
-					pinctrl_usba_vbus: usba_vbus {
-						atmel,pins =
-							<AT91_PIOD 28
-							 AT91_PERIPH_GPIO
-							 AT91_PINCTRL_DEGLITCH>;
-					};
-
-					pinctrl_mmc0_cd: mmc0_cd {
-						atmel,pins =
-							<AT91_PIOD 5
-							 AT91_PERIPH_GPIO
-							 AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-
-					pinctrl_lcd_prlud0: lcd_prlud0 {
-						atmel,pins =
-							<AT91_PIOA 21
-							 AT91_PERIPH_GPIO
-							 AT91_PINCTRL_OUTPUT_VAL(0)>;
-					};
-
-					pinctrl_lcd_hipow0: lcd_hipow0 {
-						atmel,pins =
-							<AT91_PIOA 23
-							 AT91_PERIPH_GPIO
-							 AT91_PINCTRL_OUTPUT_VAL(0)>;
-					};
-				};
-			};
-
-			watchdog@fffffe40 {
-				status = "okay";
-			};
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -103,10 +63,29 @@
 	};
 
 	panel: panel {
-		compatible = "sharp,lq150x1lg11";
+		compatible = "sharp,lq150x1lg11", "panel-lvds";
+
 		backlight = <&panel_bl>;
 		power-supply = <&panel_reg>;
 
+		width-mm = <304>;
+		height-mm = <228>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			// 1024x768 @ 60Hz (typical)
+			clock-frequency = <50000000 65000000 80000000>;
+			hactive = <1024>;
+			vactive = <768>;
+			hfront-porch = <48 88 88>;
+			hback-porch = <96 168 168>;
+			hsync-len = <32 64 64>;
+			vsync-len = <3 13 74>;
+			vfront-porch = <3 13 74>;
+			vback-porch = <3 12 74>;
+		};
+
 		port {
 			panel_input: endpoint {
 				remote-endpoint = <&lvds_encoder_output>;
@@ -115,7 +94,10 @@
 	};
 
 	lvds-encoder {
-		compatible = "lvds-encoder";
+		compatible = "ti,ds90c185", "lvds-encoder";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_prlud0 &pinctrl_lvds_hipow0>;
 
 		ports {
 			#address-cells = <1>;
@@ -159,6 +141,36 @@
 	};
 };
 
+&pinctrl {
+	nattis {
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins = <AT91_PIOD  5 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		pinctrl_lvds_prlud0: lvds_prlud0 {
+			atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+
+		pinctrl_lvds_hipow0: lvds_hipow0 {
+			atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -195,14 +207,12 @@
 
 	hlcdc-display-controller {
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd_base
-			     &pinctrl_lcd_rgb565
-			     &pinctrl_lcd_prlud0
-			     &pinctrl_lcd_hipow0>;
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
 
 		port@0 {
 			hlcdc_output: endpoint {
 				remote-endpoint = <&lvds_encoder_input>;
+				bus-width = <16>;
 			};
 		};
 	};
@@ -219,6 +229,7 @@
 		reg = <0>;
 		bus-width = <4>;
 		cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+		cd-inverted;
 	};
 };
 
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index e86e0c00eb6b..363a43d77424 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -283,6 +283,13 @@
 				status = "okay";
 			};
 
+			adc: adc@fc030000 {
+				vddana-supply = <&vddana>;
+				vref-supply = <&advref>;
+
+				status = "disabled";
+			};
+
 			pinctrl@fc038000 {
 
 				pinctrl_can1_default: can1_default {
@@ -549,4 +556,39 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	vddin_3v3: fixed-regulator-vddin_3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDIN_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		status = "okay";
+	};
+
+	vddana: fixed-regulator-vddana {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDANA";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vddin_3v3>;
+		status = "okay";
+	};
+
+	advref: fixed-regulator-advref {
+		compatible = "regulator-fixed";
+
+		regulator-name = "advref";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vddana>;
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index 3b1baa8605a7..2214bfe7aa20 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -92,13 +92,13 @@
 							reg = <0x40000 0xc0000>;
 						};
 
-						bootloaderenv@0x100000 {
-							label = "bootloader env";
+						bootloaderenvred@0x100000 {
+							label = "bootloader env redundant";
 							reg = <0x100000 0x40000>;
 						};
 
-						bootloaderenvred@0x140000 {
-							label = "bootloader env redundant";
+						bootloaderenv@0x140000 {
+							label = "bootloader env";
 							reg = <0x140000 0x40000>;
 						};
 
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index fcc85d70f36e..518e2b095ccf 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -281,6 +281,12 @@
 				status = "okay";
 			};
 
+			i2s0: i2s@f8050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2s0_default>;
+				status = "disabled"; /* conflict with can0 */
+			};
+
 			can0: can@f8054000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can0_default>;
@@ -424,6 +430,24 @@
 					bias-disable;
 				};
 
+				pinctrl_i2s0_default: i2s0_default {
+					pinmux = <PIN_PC1__I2SC0_CK>,
+						 <PIN_PC2__I2SC0_MCK>,
+						 <PIN_PC3__I2SC0_WS>,
+						 <PIN_PC4__I2SC0_DI0>,
+						 <PIN_PC5__I2SC0_DO0>;
+					bias-disable;
+				};
+
+				pinctrl_i2s1_default: i2s1_default {
+					pinmux = <PIN_PA15__I2SC1_CK>,
+						 <PIN_PA14__I2SC1_MCK>,
+						 <PIN_PA16__I2SC1_WS>,
+						 <PIN_PA17__I2SC1_DI0>,
+						 <PIN_PA18__I2SC1_DO0>;
+					bias-disable;
+				};
+
 				pinctrl_key_gpio_default: key_gpio_default {
 					pinmux = <PIN_PB9__GPIO>;
 					bias-pull-up;
@@ -546,6 +570,12 @@
 				status = "okay";
 			};
 
+			i2s1: i2s@fc04c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2s1_default>;
+				status = "disabled"; /* conflict with spi0, sdmmc1 */
+			};
+
 			can1: can@fc050000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can1_default>;
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 02c1d2958d78..322a744e4363 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -297,12 +297,17 @@
 
 						bootloader@40000 {
 							label = "bootloader";
-							reg = <0x40000 0x80000>;
+							reg = <0x40000 0xc0000>;
 						};
 
-						bootloaderenv@c0000 {
+						bootloaderenvred@100000 {
+							label = "bootloader env redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						bootloaderenv@140000 {
 							label = "bootloader env";
-							reg = <0xc0000 0xc0000>;
+							reg = <0x140000 0x40000>;
 						};
 
 						dtb@180000 {
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 4b7c762d5f22..43aef56ac74a 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -232,12 +232,17 @@
 
 						bootloader@40000 {
 							label = "bootloader";
-							reg = <0x40000 0x80000>;
+							reg = <0x40000 0xc0000>;
 						};
 
-						bootloaderenv@c0000 {
+						bootloaderenvred@100000 {
+							label = "bootloader env redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						bootloaderenv@140000 {
 							label = "bootloader env";
-							reg = <0xc0000 0xc0000>;
+							reg = <0x140000 0x40000>;
 						};
 
 						dtb@180000 {
@@ -252,7 +257,7 @@
 
 						rootfs@800000 {
 							label = "rootfs";
-							reg = <0x800000 0x0f800000>;
+							reg = <0x800000 0x1f800000>;
 						};
 					};
 				};
diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts
index 2fbec69d9cd6..fe8876eaf917 100644
--- a/arch/arm/boot/dts/at91-tse850-3.dts
+++ b/arch/arm/boot/dts/at91-tse850-3.dts
@@ -16,25 +16,6 @@
 	compatible = "axentia,tse850v3", "axentia,linea",
 		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
 
-	ahb {
-		apb {
-			pinctrl@fffff200 {
-				tse850 {
-					pinctrl_usba_vbus: usba-vbus {
-						atmel,pins =
-							<AT91_PIOC 31
-							 AT91_PERIPH_GPIO
-							 AT91_PINCTRL_DEGLITCH>;
-					};
-				};
-			};
-
-			watchdog@fffffe40 {
-				status = "okay";
-			};
-		};
-	};
-
 	sck: oscillator {
 		compatible = "fixed-clock";
 
@@ -253,6 +234,19 @@
 	};
 };
 
+&pinctrl {
+	tse850 {
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins = <AT91_PIOC 31 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_DEGLITCH>;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
 &usart0 {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
index 1be9889a2b3a..430277291e02 100644
--- a/arch/arm/boot/dts/at91-vinco.dts
+++ b/arch/arm/boot/dts/at91-vinco.dts
@@ -128,7 +128,7 @@
 			i2c2: i2c@f8024000 {
 				status = "okay";
 
-				rtc1: rtc@64 {
+				rtc1: rtc@32 {
 					compatible = "epson,rx8900";
 					reg = <0x32>;
 				};
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
index d2b865f60293..07d1b571e601 100644
--- a/arch/arm/boot/dts/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -127,7 +127,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@0 {
+				mtd_dataflash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index a29fc0494076..a57f2d435dca 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -160,7 +160,7 @@
 					spi-max-frequency = <15000000>;
 				};
 
-				tsc2046@0 {
+				tsc2046@2 {
 					reg = <2>;
 					compatible = "ti,ads7843";
 					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 71df3adfc7ca..ec1f17ab6753 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -109,7 +109,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@0 {
+				mtd_dataflash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 1ee25a475be8..d16db1fa7e15 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -570,7 +570,7 @@
 					};
 				};
 
-				uart1 {
+				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
 							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 4908ee07e628..c4cc9cc945fa 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -85,12 +85,22 @@
 
 						uboot@40000 {
 							label = "u-boot";
-							reg = <0x40000 0x80000>;
+							reg = <0x40000 0xc0000>;
 						};
 
-						ubootenv@c0000 {
+						ubootenvred@100000 {
+							label = "U-Boot Env Redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						ubootenv@140000 {
 							label = "U-Boot Env";
-							reg = <0xc0000 0x140000>;
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
 						};
 
 						kernel@200000 {
@@ -100,7 +110,7 @@
 
 						rootfs@800000 {
 							label = "rootfs";
-							reg = <0x800000 0x1f800000>;
+							reg = <0x800000 0x0f800000>;
 						};
 					};
 				};
diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
index 3084a7c95733..e4d49731287f 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -216,7 +216,7 @@
 			reg = <0x33000 0x14>;
 		};
 
-		qspi: qspi@27200 {
+		qspi: spi@27200 {
 			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
 			reg = <0x027200 0x184>,
 			      <0x027000 0x124>,
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 09ba85046322..2fd111d9d59c 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -273,7 +273,7 @@
 			brcm,nand-has-wp;
 		};
 
-		qspi: qspi@27200 {
+		qspi: spi@27200 {
 			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
 			reg = <0x027200 0x184>,
 			      <0x027000 0x124>,
@@ -377,7 +377,36 @@
 
 		srab: srab@36000 {
 			compatible = "brcm,nsp-srab";
-			reg = <0x36000 0x1000>;
+			reg = <0x36000 0x1000>,
+			      <0x3f308 0x8>,
+			      <0x3f410 0xc>;
+			reg-names = "srab", "mux_config", "sgmii";
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "link_state_p0",
+					  "link_state_p1",
+					  "link_state_p2",
+					  "link_state_p3",
+					  "link_state_p4",
+					  "link_state_p5",
+					  "link_state_p7",
+					  "link_state_p8",
+					  "phy",
+					  "ts",
+					  "imp_sleep_timer_p5",
+					  "imp_sleep_timer_p7",
+					  "imp_sleep_timer_p8";
 			#address-cells = <1>;
 			#size-cells = <0>;
 
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
new file mode 100644
index 000000000000..6c8233a36d86
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837-rpi-cm3.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
+	model = "Raspberry Pi Compute Module 3 IO board V3.0";
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "GPIO0",
+			  "GPIO1",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "GPIO32",
+			  "GPIO33",
+			  "GPIO34",
+			  "GPIO35",
+			  "GPIO36",
+			  "GPIO37",
+			  "GPIO38",
+			  "GPIO39",
+			  "GPIO40",
+			  "GPIO41",
+			  "GPIO42",
+			  "GPIO43",
+			  "GPIO44",
+			  "GPIO45",
+			  "GPIO46",
+			  "GPIO47",
+			  /* Used by eMMC */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
new file mode 100644
index 000000000000..7b7ab6aea988
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2835-rpi.dtsi"
+
+/ {
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	reg_3v3: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1v8: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "HDMI_HPD_N",
+				  "EMMC_EN_N",
+				  "NC",
+				  "NC",
+				  "NC",
+				  "NC",
+				  "NC",
+				  "NC";
+		status = "okay";
+	};
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
index 9403da0990d0..70bece63f9a7 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
@@ -1,4 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/net/microchip-lan78xx.h>
+
 / {
 	aliases {
 		ethernet0 = &ethernet;
@@ -21,6 +23,18 @@
 			ethernet: ethernet@1 {
 				compatible = "usb424,7800";
 				reg = <1>;
+
+				mdio {
+					#address-cells = <0x1>;
+					#size-cells = <0x0>;
+					eth_phy: ethernet-phy@1 {
+						reg = <1>;
+						microchip,led-modes = <
+							LAN78XX_LINK_1000_ACTIVITY
+							LAN78XX_LINK_10_100_ACTIVITY
+						>;
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
index 5f663f848db1..189cc3dcd6ef 100644
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -94,6 +94,34 @@
 
 &spi_nor {
 	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot@0 {
+			label = "boot";
+			reg = <0x000000 0x040000>;
+			read-only;
+		};
+
+		os-image@100000 {
+			label = "os-image";
+			reg = <0x040000 0x200000>;
+			compatible = "brcm,trx";
+		};
+
+		rootfs@240000 {
+			label = "rootfs";
+			reg = <0x240000 0xc00000>;
+		};
+
+		nvram@ff0000 {
+			label = "nvram";
+			reg = <0xff0000 0x010000>;
+		};
+	};
 };
 
 &usb2 {
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index 2033411240c7..4cb10f88a95e 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -66,3 +66,34 @@
 &usb3_phy {
 	status = "okay";
 };
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot@0 {
+			label = "boot";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+
+		nvram@80000 {
+			label = "nvram";
+			reg = <0x00080000 0x00180000>;
+		};
+
+		firmware@200000 {
+			label = "firmware";
+			reg = <0x00200000 0x07cc0000>;
+			compatible = "brcm,trx";
+		};
+
+		asus@7ec0000 {
+			label = "asus";
+			reg = <0x07ec0000 0x00140000>;
+			read-only;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index c7143a9daa1a..b527d2ff987e 100644
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -103,6 +103,34 @@
 
 &spi_nor {
 	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot@0 {
+			label = "boot";
+			reg = <0x000000 0x040000>;
+			read-only;
+		};
+
+		os-image@100000 {
+			label = "os-image";
+			reg = <0x040000 0x200000>;
+			compatible = "brcm,trx";
+		};
+
+		rootfs@240000 {
+			label = "rootfs";
+			reg = <0x240000 0xc00000>;
+		};
+
+		nvram@ff0000 {
+			label = "nvram";
+			reg = <0xff0000 0x010000>;
+		};
+	};
 };
 
 &usb3_phy {
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
index e5a2d62daf92..925a7c9ce5b7 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
@@ -12,6 +12,10 @@
 			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			partitions {
+				compatible = "brcm,bcm947xx-cfe-partitions";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index bc607d11eef8..7a5c188c2676 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -475,8 +475,11 @@
 			compatible = "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
-			linux,part-probe = "ofpart", "bcm47xxpart";
 			status = "disabled";
+
+			partitions {
+				compatible = "brcm,bcm947xx-cfe-partitions";
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index ea3fc194f8f3..a53a2f629d74 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -58,6 +58,24 @@
 		open-source;
 		priority = <200>;
 	};
+
+	/* Hardware I2C block cannot do more than 63 bytes per transfer,
+	 * which would prevent reading from a SFP's EEPROM (256 byte).
+	 */
+	i2c1: i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpioa 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioa 26 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &amac0 {
@@ -210,6 +228,14 @@
 			reg = <4>;
 		};
 
+		port@5 {
+			label = "sfp";
+			phy-mode = "sgmii";
+			reg = <5>;
+			sfp = <&sfp>;
+			managed = "in-band-status";
+		};
+
 		port@8 {
 			ethernet = <&amac2>;
 			label = "cpu";
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index f9b757905845..a3c9b346721d 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -221,6 +221,12 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+	tca6416_bb: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
 
 &wdt {
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index c4729d0e6c19..66fcadf0ba91 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -352,7 +352,8 @@
 		compatible = "ti,ads7957";
 		reg = <3>;
 		#io-channel-cells = <1>;
-		spi-max-frequency = <10000000>;
+		spi-max-frequency = <1000000>;
+		ti,spi-wdelay = <63>;
 		vref-supply = <&adc_ref>;
 	};
 };
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
index 85d7b5148b0a..2d201719ba69 100644
--- a/arch/arm/boot/dts/dm8148-evm.dts
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -27,15 +27,25 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &gpmc {
 	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
 
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
index c46a227b543d..63301bcacf19 100644
--- a/arch/arm/boot/dts/dm8148-t410.dts
+++ b/arch/arm/boot/dts/dm8148-t410.dts
@@ -36,15 +36,25 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc1 {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 580e3cbcfbf7..3e1584e787ae 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -87,7 +87,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 
-	si5351: clock-generator {
+	si5351: clock-generator@60 {
 		compatible = "silabs,si5351a-msop";
 		reg = <0x60>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 4a0a5115b298..250ad0535e8c 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -155,7 +155,7 @@
 				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
 				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
 
-			spi0: spi-ctrl@10600 {
+			spi0: spi@10600 {
 				compatible = "marvell,orion-spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -168,7 +168,7 @@
 				status = "disabled";
 			};
 
-			i2c: i2c-ctrl@11000 {
+			i2c: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;
@@ -218,7 +218,7 @@
 				status = "disabled";
 			};
 
-			spi1: spi-ctrl@14600 {
+			spi1: spi@14600 {
 				compatible = "marvell,orion-spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
index 31b824ad5d29..906aedde045d 100644
--- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts
+++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -27,15 +27,25 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &gpmc {
 	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
 
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 6ed5f9156270..cc079064a23b 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -512,17 +512,27 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <2>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <3>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <2>;
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	ethphy1: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
 &dcan1 {
 	status = "ok";
 	pinctrl-names = "default", "sleep", "active";
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index a0ddf497e8cd..7ce24b282d42 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -336,6 +336,7 @@
 						<0 0 0 2 &pcie1_intc 2>,
 						<0 0 0 3 &pcie1_intc 3>,
 						<0 0 0 4 &pcie1_intc 4>;
+				ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
 				status = "disabled";
 				pcie1_intc: interrupt-controller {
 					interrupt-controller;
@@ -354,7 +355,7 @@
 				ti,hwmods = "pcie1";
 				phys = <&pcie1_phy>;
 				phy-names = "pcie-phy0";
-				ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
+				ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
 				status = "disabled";
 			};
 		};
@@ -387,6 +388,7 @@
 						<0 0 0 2 &pcie2_intc 2>,
 						<0 0 0 3 &pcie2_intc 3>,
 						<0 0 0 4 &pcie2_intc 4>;
+				ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
 				pcie2_intc: interrupt-controller {
 					interrupt-controller;
 					#address-cells = <0>;
@@ -1369,7 +1371,7 @@
 			status = "disabled";
 		};
 
-		qspi: qspi@4b300000 {
+		qspi: spi@4b300000 {
 			compatible = "ti,dra7xxx-qspi";
 			reg = <0x4b300000 0x100>,
 			      <0x5c000000 0x4000000>;
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index c471bf3277b4..82cc7ec37af0 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -203,13 +203,13 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <2>;
+	phy-handle = <&dp83867_0>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <3>;
+	phy-handle = <&dp83867_1>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 };
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
index bf588d00728d..fafc2a4d7bb9 100644
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -61,13 +61,13 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <2>;
+	phy-handle = <&dp83867_0>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <3>;
+	phy-handle = <&dp83867_1>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 };
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index c572693b1665..154b0a0ceb18 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -51,10 +51,16 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <3>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
 &mmc1 {
 	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
 	pinctrl-0 = <&mmc1_pins_default>;
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 5a46163d465f..8a57895fd8f3 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -375,13 +375,13 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <2>;
+	phy-handle = <&dp83867_0>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <3>;
+	phy-handle = <&dp83867_1>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 };
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 620b50c19ead..7c22cbf6f3d4 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -69,6 +69,8 @@
 		compatible = "samsung,s2mps14-pmic";
 		interrupt-parent = <&gpx3>;
 		interrupts = <5 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps14_irq>;
 		reg = <0x66>;
 
 		s2mps14_osc: clocks {
@@ -350,6 +352,11 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
 		samsung,pin-val = <1>;
 	};
+
+	s2mps14_irq: s2mps14-irq {
+		samsung,pins = "gpx3-5";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };
 
 &rtc {
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 2ab99f9f3d0a..dd9ec05eb0f7 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -151,6 +151,8 @@
 		reg = <0x66>;
 		interrupt-parent = <&gpx0>;
 		interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max8997_irq>;
 
 		max8997,pmic-buck1-dvs-voltage = <1350000>;
 		max8997,pmic-buck2-dvs-voltage = <1100000>;
@@ -288,6 +290,13 @@
 	};
 };
 
+&pinctrl_1 {
+	max8997_irq: max8997-irq {
+		samsung,pins = "gpx0-3", "gpx0-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
 &sdhci_0 {
 	bus-width = <4>;
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 6f1d76cb7951..f9bbc6315cd9 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -385,6 +385,12 @@
 			     regulator-max-microvolt = <1800000>;
 			};
 
+			tflash_reg: LDO17 {
+			     regulator-name = "VTF_2.8V";
+			     regulator-min-microvolt = <2800000>;
+			     regulator-max-microvolt = <2800000>;
+			};
+
 			vddq_reg: LDO21 {
 			     regulator-name = "VDDQ_M1M2_1.2V";
 			     regulator-min-microvolt = <1200000>;
@@ -452,6 +458,15 @@
 	status = "okay";
 };
 
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&tflash_reg>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
 &serial_0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 4e6ff97e1ec4..5c3d98654f13 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -310,6 +310,9 @@
 
 	pmic@66 {
 		compatible = "national,lp3974";
+		interrupts-extended = <&gpx0 7 0>, <&gpx2 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lp3974_irq>;
 		reg = <0x66>;
 
 		max8998,pmic-buck1-default-dvs-idx = <0>;
@@ -503,6 +506,11 @@
 };
 
 &pinctrl_1 {
+	lp3974_irq: lp3974-irq {
+		samsung,pins = "gpx0-7", "gpx2-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
 	hdmi_hpd: hdmi-hpd {
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -537,8 +545,7 @@
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
 	pinctrl-names = "default";
 	vmmc-supply = <&ldo5_reg>;
-	cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index c0476c290977..aed2f2e2b0d1 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -1269,8 +1269,7 @@
 
 &sdhci_2 {
 	bus-width = <4>;
-	cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
 	pinctrl-names = "default";
 	vmmc-supply = <&ldo21_reg>;
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index a09e46c9dbc0..2caa3132f34e 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -539,8 +539,7 @@
 	pinctrl-names = "default";
 	vmmc-supply = <&ldo21_reg>;
 	vqmmc-supply = <&ldo4_reg>;
-	cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpk2 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 7a8a5c55701a..7d1f2dc59038 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -71,6 +71,17 @@
 		};
 	};
 
+	panel: panel {
+		compatible = "boe,hv070wsa-100";
+		power-supply = <&vcc_3v3_reg>;
+		enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
+		port {
+			panel_ep: endpoint {
+				remote-endpoint = <&bridge_out_ep>;
+			};
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -97,6 +108,30 @@
 			reg = <2>;
 			regulator-name = "hdmi-en";
 		};
+
+		vcc_1v2_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "VCC_1V2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vcc_1v8_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "VCC_1V8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vcc_3v3_reg: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "VCC_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
 	};
 
 	fixed-rate-clocks {
@@ -119,6 +154,32 @@
 	cpu0-supply = <&buck2_reg>;
 };
 
+&dsi_0 {
+	vddcore-supply = <&ldo8_reg>;
+	vddio-supply = <&ldo10_reg>;
+	samsung,pll-clock-frequency = <24000000>;
+	samsung,burst-clock-frequency = <320000000>;
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	bridge@0 {
+		reg = <0>;
+		compatible = "toshiba,tc358764";
+		vddc-supply = <&vcc_1v2_reg>;
+		vddio-supply = <&vcc_1v8_reg>;
+		vddlvds-supply = <&vcc_3v3_reg>;
+		reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@1 {
+			reg = <1>;
+			bridge_out_ep: endpoint {
+				remote-endpoint = <&panel_ep>;
+			};
+		};
+	};
+};
+
 &dp {
 	status = "okay";
 	samsung,color-space = <0>;
@@ -149,9 +210,11 @@
 };
 
 &hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd>;
 	status = "okay";
-	ddc = <&i2c_2>;
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>;
+	ddc = <&i2c_ddc>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	vdd_osc-supply = <&ldo10_reg>;
 	vdd_pll-supply = <&ldo8_reg>;
 	vdd-supply = <&ldo8_reg>;
@@ -168,6 +231,8 @@
 		reg = <0x66>;
 		interrupt-parent = <&gpx3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s5m8767_irq>;
 
 		vinb1-supply = <&main_dc_reg>;
 		vinb2-supply = <&main_dc_reg>;
@@ -452,13 +517,6 @@
 	};
 };
 
-&i2c_2 {
-	status = "okay";
-	/* used by HDMI DDC */
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
 &i2c_3 {
 	status = "okay";
 
@@ -535,6 +593,13 @@
 	cap-sd-highspeed;
 };
 
+&pinctrl_0 {
+	s5m8767_irq: s5m8767-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
 &rtc {
 	status = "okay";
 };
@@ -547,3 +612,22 @@
 	status = "okay";
 	samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
 };
+
+&soc {
+	/*
+	 * For unknown reasons HDMI-DDC does not work with Exynos I2C
+	 * controllers. Lets use software I2C over GPIO pins as a workaround.
+	 */
+	i2c_ddc: i2c-gpio {
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_gpio_bus>;
+		status = "okay";
+		compatible = "i2c-gpio";
+		gpios = <&gpa0 6 0 /* sda */
+			 &gpa0 7 0 /* scl */
+			>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 6ff6dea29d44..d31a68672bfa 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -225,6 +225,12 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
+	i2c2_gpio_bus: i2c2-gpio-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -593,6 +599,11 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
+
+	hdmi_hpd: hdmi-hpd {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };
 
 &pinctrl_1 {
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
index 0348b1c49a69..7cbfc6f1f4b8 100644
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -20,6 +20,14 @@
 
 		samsung,model = "Snow-I2S-MAX98090";
 		samsung,audio-codec = <&max98090>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&max98090 0>, <&hdmi>;
+		};
 	};
 };
 
@@ -31,6 +39,9 @@
 		interrupt-parent = <&gpx0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max98090_irq>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "mclk";
+		#sound-dai-cells = <1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index da163a40af15..5044f754e6e5 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -54,62 +54,109 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
-			clock-frequency = <1700000000>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
-			clock-latency = <140000>;
-
-			operating-points = <
-				1700000 1300000
-				1600000 1250000
-				1500000 1225000
-				1400000 1200000
-				1300000 1150000
-				1200000 1125000
-				1100000 1100000
-				1000000 1075000
-				 900000 1050000
-				 800000 1025000
-				 700000 1012500
-				 600000 1000000
-				 500000  975000
-				 400000  950000
-				 300000  937500
-				 200000  925000
-			>;
+			operating-points-v2 = <&cpu0_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
-			clock-frequency = <1700000000>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
-			clock-latency = <140000>;
-
-			operating-points = <
-				1700000 1300000
-				1600000 1250000
-				1500000 1225000
-				1400000 1200000
-				1300000 1150000
-				1200000 1125000
-				1100000 1100000
-				1000000 1075000
-				 900000 1050000
-				 800000 1025000
-				 700000 1012500
-				 600000 1000000
-				 500000  975000
-				 400000  950000
-				 300000  937500
-				 200000  925000
-			>;
+			operating-points-v2 = <&cpu0_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <937500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <1012500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1025000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1050000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1075000>;
+			clock-latency-ns = <140000>;
+			opp-suspend;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1125000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1150000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1225000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <1250000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <1300000>;
+			clock-latency-ns = <140000>;
+		};
+	};
+
 	soc: soc {
 		sysram@2020000 {
 			compatible = "mmio-sram";
@@ -756,6 +803,27 @@
 			#phy-cells = <0>;
 		};
 
+		mipi_phy: video-phy@10040710 {
+			compatible = "samsung,s5pv210-mipi-video-phy";
+			reg = <0x10040710 0x100>;
+			#phy-cells = <1>;
+			syscon = <&pmu_system_controller>;
+		};
+
+		dsi_0: dsi@14500000 {
+			compatible = "samsung,exynos4210-mipi-dsi";
+			reg = <0x14500000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,power-domain = <&pd_disp1>;
+			phys = <&mipi_phy 3>;
+			phy-names = "dsim";
+			clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI1>;
+			clock-names = "bus_clk", "sclk_mipi";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		adc: adc@12d10000 {
 			compatible = "samsung,exynos-adc-v1";
 			reg = <0x12D10000 0x100>;
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index a2046f5f998c..434a7591ff63 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -530,7 +530,7 @@
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4 &sd2_wp>;
 	bus-width = <4>;
 	cap-sd-highspeed;
 	vmmc-supply = <&ldo21_reg>;
@@ -545,6 +545,14 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
+	sd2_wp: sd2-wp {
+		samsung,pins = "gpm5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		/* Pin is floating so be sure to disable write-protect */
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
 	pmic_dvs_3: pmic-dvs-3 {
 		samsung,pins = "gpx0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 57c2332bf282..f78db6809cca 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -153,7 +153,7 @@
 
 &clock_audss {
 	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
-	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-parents = <&clock CLK_MAU_EPLL>;
 };
 
 &cpu0 {
@@ -312,6 +312,7 @@
 				regulator-name = "vdd_1v35";
 				regulator-min-microvolt = <1350000>;
 				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -333,6 +334,7 @@
 				regulator-name = "vdd_2v";
 				regulator-min-microvolt = <2000000>;
 				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -343,6 +345,7 @@
 				regulator-name = "vdd_1v8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 2f4f40882dab..2fac4baf1eb4 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -154,6 +154,13 @@
 				regulator-always-on;
 			};
 
+			ldo2_reg: LDO2 {
+				regulator-name = "vdd_ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
 			ldo3_reg: LDO3 {
 				regulator-name = "vddq_mmc0";
 				regulator-min-microvolt = <1800000>;
@@ -216,10 +223,10 @@
 			};
 
 			ldo12_reg: LDO12 {
+				/* Unused */
 				regulator-name = "vdd_ldo12";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
 			};
 
 			ldo13_reg: LDO13 {
@@ -228,6 +235,13 @@
 				regulator-max-microvolt = <2800000>;
 			};
 
+			ldo14_reg: LDO14 {
+				/* Unused */
+				regulator-name = "vdd_ldo14";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
 			ldo15_reg: LDO15 {
 				regulator-name = "vdd_ldo15";
 				regulator-min-microvolt = <3300000>;
@@ -236,10 +250,10 @@
 			};
 
 			ldo16_reg: LDO16 {
+				/* Unused */
 				regulator-name = "vdd_ldo16";
-				regulator-min-microvolt = <2200000>;
-				regulator-max-microvolt = <2200000>;
-				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
 			};
 
 			ldo17_reg: LDO17 {
@@ -261,20 +275,139 @@
 				regulator-max-microvolt = <2800000>;
 			};
 
-			ldo24_reg: LDO24 {
-				regulator-name = "tsp_io";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
+			ldo20_reg: LDO20 {
+				/* Unused */
+				regulator-name = "vdd_ldo20";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo21_reg: LDO21 {
+				/* Unused */
+				regulator-name = "vdd_ldo21";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo22_reg: LDO22 {
+				/* Unused */
+				regulator-name = "vdd_ldo22";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "vdd_mifs";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
 			};
 
+			ldo24_reg: LDO24 {
+				/* Unused */
+				regulator-name = "vdd_ldo24";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo25_reg: LDO25 {
+				/* Unused */
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
 			ldo26_reg: LDO26 {
+				/* Used on XU3, XU3-Lite and XU4 */
 				regulator-name = "vdd_ldo26";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "vdd_g3ds";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
 			};
 
+			ldo28_reg: LDO28 {
+				/* Used on XU3 */
+				regulator-name = "vdd_ldo28";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo29_reg: LDO29 {
+				/* Unused */
+				regulator-name = "vdd_ldo29";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo30_reg: LDO30 {
+				/* Unused */
+				regulator-name = "vdd_ldo30";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo31_reg: LDO31 {
+				/* Unused */
+				regulator-name = "vdd_ldo31";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo32_reg: LDO32 {
+				/* Unused */
+				regulator-name = "vdd_ldo32";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo33_reg: LDO33 {
+				/* Unused */
+				regulator-name = "vdd_ldo33";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo34_reg: LDO34 {
+				/* Unused */
+				regulator-name = "vdd_ldo34";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo35_reg: LDO35 {
+				/* Unused */
+				regulator-name = "vdd_ldo35";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+			};
+
+			ldo36_reg: LDO36 {
+				/* Unused */
+				regulator-name = "vdd_ldo36";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo37_reg: LDO37 {
+				/* Unused */
+				regulator-name = "vdd_ldo37";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo38_reg: LDO38 {
+				/* Unused */
+				regulator-name = "vdd_ldo38";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
 			buck1_reg: BUCK1 {
 				regulator-name = "vdd_mif";
 				regulator-min-microvolt = <800000>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 96e281c0a118..e522edb2bb82 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -367,6 +367,12 @@
 	status = "okay";
 };
 
+&ldo26_reg {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-always-on;
+};
+
 &mixer {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index 0322f281912c..db0bc17a667b 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -49,6 +49,12 @@
 	};
 };
 
+&ldo28_reg {
+	regulator-name = "dp_p3v3";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
 &pwm {
 	/*
 	 * PWM 0 -- fan
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index d80ab9085da1..e0f470fe54c8 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -153,7 +153,7 @@
 
 &clock_audss {
 	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
-	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-parents = <&clock CLK_MAU_EPLL>;
 };
 
 &cpu0 {
@@ -312,6 +312,7 @@
 				regulator-name = "vdd_1v35";
 				regulator-min-microvolt = <1350000>;
 				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -333,6 +334,7 @@
 				regulator-name = "vdd_2v";
 				regulator-min-microvolt = <2000000>;
 				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -343,6 +345,7 @@
 				regulator-name = "vdd_1v8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index 44044f275115..0f917b272ff3 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -277,10 +277,11 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		port {
-			etb0_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&replicator0_out_port0>;
+		in-ports {
+			port {
+				etb0_in_port: endpoint@0 {
+					remote-endpoint = <&replicator0_out_port0>;
+				};
 			};
 		};
 	};
@@ -291,10 +292,11 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		port {
-			etb1_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&replicator1_out_port0>;
+		in-ports {
+			port {
+				etb1_in_port: endpoint@0 {
+					remote-endpoint = <&replicator1_out_port0>;
+				};
 			};
 		};
 	};
@@ -305,10 +307,11 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		port {
-			etb2_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&replicator2_out_port0>;
+		in-ports {
+			port {
+				etb2_in_port: endpoint@0 {
+					remote-endpoint = <&replicator2_out_port0>;
+				};
 			};
 		};
 	};
@@ -319,10 +322,11 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		port {
-			etb3_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&replicator3_out_port0>;
+		in-ports {
+			port {
+				etb3_in_port: endpoint@0 {
+					remote-endpoint = <&replicator3_out_port0>;
+				};
 			};
 		};
 	};
@@ -333,10 +337,11 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		port {
-			tpiu_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&funnel4_out_port0>;
+		in-ports {
+			port {
+				tpiu_in_port: endpoint@0 {
+					remote-endpoint = <&funnel4_out_port0>;
+				};
 			};
 		};
 	};
@@ -347,7 +352,7 @@
 		 */
 		compatible = "arm,coresight-replicator";
 
-		ports {
+		out-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -365,12 +370,11 @@
 					remote-endpoint = <&funnel4_in_port0>;
 				};
 			};
+		};
 
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
+		in-ports {
+			port {
 				replicator0_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&funnel0_out_port0>;
 				};
 			};
@@ -383,7 +387,7 @@
 		 */
 		compatible = "arm,coresight-replicator";
 
-		ports {
+		out-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -401,12 +405,11 @@
 					remote-endpoint = <&funnel4_in_port1>;
 				};
 			};
+		};
 
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
+		in-ports {
+			port {
 				replicator1_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&funnel1_out_port0>;
 				};
 			};
@@ -419,11 +422,10 @@
 		 */
 		compatible = "arm,coresight-replicator";
 
-		ports {
+		out-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			/* replicator output ports */
 			port@0 {
 				reg = <0>;
 				replicator2_out_port0: endpoint {
@@ -437,12 +439,11 @@
 					remote-endpoint = <&funnel4_in_port2>;
 				};
 			};
+		};
 
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
+		in-ports {
+			port {
 				replicator2_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&funnel2_out_port0>;
 				};
 			};
@@ -455,11 +456,10 @@
 		 */
 		compatible = "arm,coresight-replicator";
 
-		ports {
+		out-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			/* replicator output ports */
 			port@0 {
 				reg = <0>;
 				replicator3_out_port0: endpoint {
@@ -473,12 +473,11 @@
 					remote-endpoint = <&funnel4_in_port3>;
 				};
 			};
+		};
 
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
+		in-ports {
+			port {
 				replicator3_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&funnel3_out_port0>;
 				};
 			};
@@ -491,48 +490,43 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
+		out-ports {
+			port {
 				funnel0_out_port0: endpoint {
 					remote-endpoint =
 						<&replicator0_in_port0>;
 				};
 			};
+		};
 
-			/* funnel input ports */
-			port@1 {
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
 				funnel0_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm0_out_port>;
 				};
 			};
 
-			port@2 {
+			port@1 {
 				reg = <1>;
 				funnel0_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm1_out_port>;
 				};
 			};
 
-			port@3 {
+			port@2 {
 				reg = <2>;
 				funnel0_in_port2: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm2_out_port>;
 				};
 			};
 
-			port@4 {
+			port@3 {
 				reg = <3>;
 				funnel0_in_port3: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm3_out_port>;
 				};
 			};
@@ -545,48 +539,43 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
+		out-ports {
+			port {
 				funnel1_out_port0: endpoint {
 					remote-endpoint =
 						<&replicator1_in_port0>;
 				};
 			};
+		};
 
-			/* funnel input ports */
-			port@1 {
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
 				funnel1_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm4_out_port>;
 				};
 			};
 
-			port@2 {
+			port@1 {
 				reg = <1>;
 				funnel1_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm5_out_port>;
 				};
 			};
 
-			port@3 {
+			port@2 {
 				reg = <2>;
 				funnel1_in_port2: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm6_out_port>;
 				};
 			};
 
-			port@4 {
+			port@3 {
 				reg = <3>;
 				funnel1_in_port3: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm7_out_port>;
 				};
 			};
@@ -599,48 +588,43 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
+		out-ports {
+			port {
 				funnel2_out_port0: endpoint {
 					remote-endpoint =
 						<&replicator2_in_port0>;
 				};
 			};
+		};
 
-			/* funnel input ports */
-			port@1 {
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
 				funnel2_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm8_out_port>;
 				};
 			};
 
-			port@2 {
+			port@1 {
 				reg = <1>;
 				funnel2_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm9_out_port>;
 				};
 			};
 
-			port@3 {
+			port@2 {
 				reg = <2>;
 				funnel2_in_port2: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm10_out_port>;
 				};
 			};
 
-			port@4 {
+			port@3 {
 				reg = <3>;
 				funnel2_in_port3: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm11_out_port>;
 				};
 			};
@@ -653,48 +637,43 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
+		out-ports {
+			port {
 				funnel3_out_port0: endpoint {
 					remote-endpoint =
 						<&replicator3_in_port0>;
 				};
 			};
+		};
 
-			/* funnel input ports */
-			port@1 {
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
 				funnel3_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm12_out_port>;
 				};
 			};
 
-			port@2 {
+			port@1 {
 				reg = <1>;
 				funnel3_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm13_out_port>;
 				};
 			};
 
-			port@3 {
+			port@2 {
 				reg = <2>;
 				funnel3_in_port2: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm14_out_port>;
 				};
 			};
 
-			port@4 {
+			port@3 {
 				reg = <3>;
 				funnel3_in_port3: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm15_out_port>;
 				};
 			};
@@ -707,50 +686,45 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
+		out-ports {
+			port {
 				funnel4_out_port0: endpoint {
 					remote-endpoint = <&tpiu_in_port>;
 				};
 			};
+		};
 
-			/* funnel input ports */
-			port@1 {
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
 				funnel4_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint =
 						<&replicator0_out_port1>;
 				};
 			};
 
-			port@2 {
+			port@1 {
 				reg = <1>;
 				funnel4_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint =
 						<&replicator1_out_port1>;
 				};
 			};
 
-			port@3 {
+			port@2 {
 				reg = <2>;
 				funnel4_in_port2: endpoint {
-					slave-mode;
 					remote-endpoint =
 						<&replicator2_out_port1>;
 				};
 			};
 
-			port@4 {
+			port@3 {
 				reg = <3>;
 				funnel4_in_port3: endpoint {
-					slave-mode;
 					remote-endpoint =
 						<&replicator3_out_port1>;
 				};
@@ -765,9 +739,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU0>;
-		port {
-			ptm0_out_port: endpoint {
-				remote-endpoint = <&funnel0_in_port0>;
+		out-ports {
+			port {
+				ptm0_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port0>;
+				};
 			};
 		};
 	};
@@ -779,9 +755,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU1>;
-		port {
-			ptm1_out_port: endpoint {
-				remote-endpoint = <&funnel0_in_port1>;
+		out-ports {
+			port {
+				ptm1_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port1>;
+				};
 			};
 		};
 	};
@@ -793,9 +771,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU2>;
-		port {
-			ptm2_out_port: endpoint {
-				remote-endpoint = <&funnel0_in_port2>;
+		out-ports {
+			port {
+				ptm2_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port2>;
+				};
 			};
 		};
 	};
@@ -807,9 +787,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU3>;
-		port {
-			ptm3_out_port: endpoint {
-				remote-endpoint = <&funnel0_in_port3>;
+		out-ports {
+			port {
+				ptm3_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port3>;
+				};
 			};
 		};
 	};
@@ -821,9 +803,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU4>;
-		port {
-			ptm4_out_port: endpoint {
-				remote-endpoint = <&funnel1_in_port0>;
+		out-ports {
+			port {
+				ptm4_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port0>;
+				};
 			};
 		};
 	};
@@ -835,9 +819,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU5>;
-		port {
-			ptm5_out_port: endpoint {
-				remote-endpoint = <&funnel1_in_port1>;
+		out-ports {
+			port {
+				ptm5_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port1>;
+				};
 			};
 		};
 	};
@@ -849,9 +835,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU6>;
-		port {
-			ptm6_out_port: endpoint {
-				remote-endpoint = <&funnel1_in_port2>;
+		out-ports {
+			port {
+				ptm6_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port2>;
+				};
 			};
 		};
 	};
@@ -863,9 +851,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU7>;
-		port {
-			ptm7_out_port: endpoint {
-				remote-endpoint = <&funnel1_in_port3>;
+		out-ports {
+			port {
+				ptm7_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port3>;
+				};
 			};
 		};
 	};
@@ -877,9 +867,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU8>;
-		port {
-			ptm8_out_port: endpoint {
-				remote-endpoint = <&funnel2_in_port0>;
+		out-ports {
+			port {
+				ptm8_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port0>;
+				};
 			};
 		};
 	};
@@ -890,9 +882,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU9>;
-		port {
-			ptm9_out_port: endpoint {
-				remote-endpoint = <&funnel2_in_port1>;
+		out-ports {
+			port {
+				ptm9_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port1>;
+				};
 			};
 		};
 	};
@@ -904,9 +898,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU10>;
-		port {
-			ptm10_out_port: endpoint {
-				remote-endpoint = <&funnel2_in_port2>;
+		out-ports {
+			port {
+				ptm10_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port2>;
+				};
 			};
 		};
 	};
@@ -918,9 +914,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU11>;
-		port {
-			ptm11_out_port: endpoint {
-				remote-endpoint = <&funnel2_in_port3>;
+		out-ports {
+			port {
+				ptm11_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port3>;
+				};
 			};
 		};
 	};
@@ -932,9 +930,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU12>;
-		port {
-			ptm12_out_port: endpoint {
-				remote-endpoint = <&funnel3_in_port0>;
+		out-ports {
+			port {
+				ptm12_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port0>;
+				};
 			};
 		};
 	};
@@ -946,9 +946,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU13>;
-		port {
-			ptm13_out_port: endpoint {
-				remote-endpoint = <&funnel3_in_port1>;
+		out-ports {
+			port {
+				ptm13_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port1>;
+				};
 			};
 		};
 	};
@@ -960,9 +962,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU14>;
-		port {
-			ptm14_out_port: endpoint {
-				remote-endpoint = <&funnel3_in_port2>;
+		out-ports {
+			port {
+				ptm14_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port2>;
+				};
 			};
 		};
 	};
@@ -974,9 +978,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU15>;
-		port {
-			ptm15_out_port: endpoint {
-				remote-endpoint = <&funnel3_in_port3>;
+		out-ports {
+			port {
+				ptm15_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port3>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi
index 3edc7b5550d8..b00ece16b853 100644
--- a/arch/arm/boot/dts/imx1.dtsi
+++ b/arch/arm/boot/dts/imx1.dtsi
@@ -164,7 +164,7 @@
 			reg = <0x00210000 0x10000>;
 			ranges;
 
-			cspi1: cspi@213000 {
+			cspi1: spi@213000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx1-cspi";
@@ -186,7 +186,7 @@
 				status = "disabled";
 			};
 
-			cspi2: cspi@219000 {
+			cspi2: spi@219000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx1-cspi";
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index ad2ae25b7b4d..98efe1aeb26a 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -58,7 +58,7 @@
 				status = "okay";
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index e9351774c619..31b1e3581ac0 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -25,7 +25,7 @@
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
@@ -59,7 +59,7 @@
 				};
 			};
 
-			ssp1: ssp@80034000 {
+			ssp1: spi@80034000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx23-spi";
diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts
index 67de7863ad79..faf701b2adb2 100644
--- a/arch/arm/boot/dts/imx23-sansa.dts
+++ b/arch/arm/boot/dts/imx23-sansa.dts
@@ -55,7 +55,7 @@
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
@@ -65,7 +65,7 @@
 				status = "okay";
 			};
 
-			ssp1: ssp@80034000 {
+			ssp1: spi@80034000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc1_8bit_pins_a>;
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
index 95c7b918f6d6..2ff6cdf71a55 100644
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -22,7 +22,7 @@
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts
index 9616e500b996..db53089fb7fb 100644
--- a/arch/arm/boot/dts/imx23-xfi3.dts
+++ b/arch/arm/boot/dts/imx23-xfi3.dts
@@ -54,7 +54,7 @@
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
@@ -64,7 +64,7 @@
 				status = "okay";
 			};
 
-			ssp1: ssp@80034000 {
+			ssp1: spi@80034000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc1_4bit_pins_a>;
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 71bfd2b15609..ea259927eef6 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -93,7 +93,7 @@
 				status = "disabled";
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				reg = <0x80010000 0x2000>;
 				interrupts = <15>;
 				clocks = <&clks 33>;
@@ -457,7 +457,7 @@
 				status = "disabled";
 			};
 
-			ssp1: ssp@80034000 {
+			ssp1: spi@80034000 {
 				reg = <0x80034000 0x2000>;
 				interrupts = <2>;
 				clocks = <&clks 33>;
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 85c15ee63272..b25309d26ea5 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -168,7 +168,7 @@
 				status = "disabled";
 			};
 
-			spi1: cspi@43fa4000 {
+			spi1: spi@43fa4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
@@ -209,7 +209,7 @@
 			reg = <0x50000000 0x40000>;
 			ranges;
 
-			spi3: cspi@50004000 {
+			spi3: spi@50004000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
@@ -238,7 +238,7 @@
 				status = "disabled";
 			};
 
-			spi2: cspi@50010000 {
+			spi2: spi@50010000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 753d88df1627..151b0eb17dda 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -209,7 +209,7 @@
 				status = "disabled";
 			};
 
-			cspi1: cspi@1000e000 {
+			cspi1: spi@1000e000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx27-cspi";
@@ -221,7 +221,7 @@
 				status = "disabled";
 			};
 
-			cspi2: cspi@1000f000 {
+			cspi2: spi@1000f000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx27-cspi";
@@ -373,7 +373,7 @@
 				status = "disabled";
 			};
 
-			cspi3: cspi@10017000 {
+			cspi3: spi@10017000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx27-cspi";
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index c4fadbc1b400..8df5ec470376 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -18,7 +18,7 @@
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a
@@ -27,7 +27,7 @@
 				status = "okay";
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				compatible = "fsl,imx28-spi";
 				pinctrl-names = "default";
 				pinctrl-0 = <&spi2_pins_a>;
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 96faa53ba44c..6c9b498305c0 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -18,7 +18,7 @@
 				status = "okay";
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
@@ -26,7 +26,7 @@
 				status = "okay";
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index e54f5aba7091..8337ca21e281 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -66,7 +66,7 @@
 
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
index 97084e463d7c..f4f2b3d16c8e 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
@@ -25,7 +25,7 @@
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_8bit_pins_a
@@ -36,7 +36,7 @@
 				non-removable;
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc2_4bit_pins_b
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
index 22215337f72a..71d0fcbc2d8c 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
@@ -26,7 +26,7 @@
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_8bit_pins_a
@@ -37,7 +37,7 @@
 				non-removable;
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc2_4bit_pins_b
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
index 13e7b134da9e..6580ec6e26ba 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
@@ -29,7 +29,7 @@
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_8bit_pins_a
@@ -40,7 +40,7 @@
 				non-removable;
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				compatible = "fsl,imx28-spi";
 				pinctrl-names = "default";
 				pinctrl-0 = <&spi2_pins_a>;
diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts
index 88556c93b00f..693634edae99 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2.dts
@@ -25,7 +25,7 @@
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_8bit_pins_a
@@ -36,7 +36,7 @@
 				non-removable;
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc2_4bit_pins_b
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
index f286bfe699be..16f524428ed7 100644
--- a/arch/arm/boot/dts/imx28-duckbill.dts
+++ b/arch/arm/boot/dts/imx28-duckbill.dts
@@ -24,7 +24,7 @@
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a
@@ -34,7 +34,7 @@
 				status = "okay";
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				compatible = "fsl,imx28-spi";
 				pinctrl-names = "default";
 				pinctrl-0 = <&spi2_pins_a>;
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 93ab5bdfe068..5778300f44e8 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -103,7 +103,7 @@
 				status = "okay";
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_8bit_pins_a
@@ -114,13 +114,13 @@
 				status = "okay";
 			};
 
-			ssp1: ssp@80012000 {
+			ssp1: spi@80012000 {
 				compatible = "fsl,imx28-mmc";
 				bus-width = <8>;
 				wp-gpios = <&gpio0 28 0>;
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx28-spi";
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
index 3bb5ffc644d6..8883d36a51b5 100644
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -41,7 +41,7 @@
 				};
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a
@@ -52,7 +52,7 @@
 				status = "okay";
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc2_4bit_pins_a
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 7d97a0ce74a3..893886d17b2d 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -18,7 +18,7 @@
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_8bit_pins_a
@@ -30,7 +30,7 @@
 				status = "okay";
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx28-spi";
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 2393e83979e0..ea9212f6ecda 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -40,7 +40,7 @@
 
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a>;
@@ -48,7 +48,7 @@
 				status = "okay";
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx28-spi";
diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts
index f8a09a8c2c36..dccdd6bcd0b2 100644
--- a/arch/arm/boot/dts/imx28-ts4600.dts
+++ b/arch/arm/boot/dts/imx28-ts4600.dts
@@ -25,7 +25,7 @@
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 5107fdc482ea..2b7efb659fc0 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -117,7 +117,7 @@
 				status = "disabled";
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80010000 0x2000>;
@@ -128,7 +128,7 @@
 				status = "disabled";
 			};
 
-			ssp1: ssp@80012000 {
+			ssp1: spi@80012000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80012000 0x2000>;
@@ -139,7 +139,7 @@
 				status = "disabled";
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80014000 0x2000>;
@@ -150,7 +150,7 @@
 				status = "disabled";
 			};
 
-			ssp3: ssp@80016000 {
+			ssp3: spi@80016000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80016000 0x2000>;
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index ca1419ca303c..af7afccf5f2f 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -206,7 +206,7 @@
 				status = "disabled";
 			};
 
-			spi2: cspi@50010000 {
+			spi2: spi@50010000 {
 				compatible = "fsl,imx31-cspi";
 				reg = <0x50010000 0x4000>;
 				interrupts = <13>;
@@ -241,7 +241,7 @@
 				#clock-cells = <1>;
 			};
 
-			spi3: cspi@53f84000 {
+			spi3: spi@53f84000 {
 				compatible = "fsl,imx31-cspi";
 				reg = <0x53f84000 0x4000>;
 				interrupts = <17>;
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 1c50b785cad4..a1c3d28e8771 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -133,7 +133,7 @@
 				status = "disabled";
 			};
 
-			spi1: cspi@43fa4000 {
+			spi1: spi@43fa4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx35-cspi";
@@ -174,7 +174,7 @@
 				status = "disabled";
 			};
 
-			spi2: cspi@50010000 {
+			spi2: spi@50010000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx35-cspi";
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index 7fae2ffb76fe..95b7fba58300 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -140,7 +140,7 @@
 					status = "disabled";
 				};
 
-				ecspi1: ecspi@50010000 {
+				ecspi1: spi@50010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
@@ -403,7 +403,7 @@
 				status = "disabled";
 			};
 
-			ecspi2: ecspi@63fac000 {
+			ecspi2: spi@63fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
@@ -426,7 +426,7 @@
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
 			};
 
-			cspi: cspi@63fc0000 {
+			cspi: spi@63fc0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index ba60b0cb3cc1..35ee1b4247c3 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -204,6 +204,7 @@
 		reg = <0>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
 		fsl,mc13xxx-uses-rtc;
 
 		regulators {
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index 469cce2c0357..e45a15ceb94b 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -508,7 +508,7 @@
 	};
 
 	ds1341: rtc@68 {
-		compatible = "maxim,ds1341";
+		compatible = "dallas,ds1341";
 		reg = <0x68>;
 	};
 
diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
index 26cf08549df4..243d1c8cab0a 100644
--- a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
+++ b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
@@ -342,6 +342,14 @@
 	vcc-supply = <&vusb2_reg>;
 };
 
+&vpu {
+	status = "disabled";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
 &iomuxc {
 	pinctrl_ecspi1: ecspi1grp {
 		fsl,pins = <
diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
index e6ebac8f43e4..14b207778114 100644
--- a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
+++ b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
@@ -350,6 +350,10 @@
 	vcc-supply = <&vusb2_reg>;
 };
 
+&vpu {
+	status = "disabled";
+};
+
 &wdog1 {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 5c4ba91e43ba..67d462715048 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -197,7 +197,7 @@
 					status = "disabled";
 				};
 
-				ecspi1: ecspi@70010000 {
+				ecspi1: spi@70010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx51-ecspi";
@@ -464,7 +464,7 @@
 				status = "disabled";
 			};
 
-			ecspi2: ecspi@83fac000 {
+			ecspi2: spi@83fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-ecspi";
@@ -487,7 +487,7 @@
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
 			};
 
-			cspi: cspi@83fc0000 {
+			cspi: spi@83fc0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
@@ -608,7 +608,7 @@
 				status = "disabled";
 			};
 
-			vpu@83ff4000 {
+			vpu: vpu@83ff4000 {
 				compatible = "fsl,imx51-vpu", "cnm,codahx4";
 				reg = <0x83ff4000 0x1000>;
 				interrupts = <9>;
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index cdb90bee7b4a..b560ff88459b 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -319,7 +319,6 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
-	num-chipselects = <1>;
 	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 6386185ae234..207eb557c90e 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -259,7 +259,7 @@
 					status = "disabled";
 				};
 
-				ecspi1: ecspi@50010000 {
+				ecspi1: spi@50010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -684,7 +684,7 @@
 				status = "disabled";
 			};
 
-			ecspi2: ecspi@63fac000 {
+			ecspi2: spi@63fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -707,7 +707,7 @@
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
 			};
 
-			cspi: cspi@63fc0000 {
+			cspi: spi@63fc0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index 9de45a717356..d08e0402793b 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -146,7 +146,7 @@
 &ecspi4 {
 	status = "okay";
 
-	mcp251x0: mcp251x@1 {
+	mcp251x0: mcp251x@0 {
 		compatible = "microchip,mcp2515";
 		reg = <0>;
 		clocks = <&clk16m>;
diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
index bf53f0552aa1..e43bccb78ab2 100644
--- a/arch/arm/boot/dts/imx6dl-icore-mipi.dts
+++ b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright (C) 2018 Engicam S.r.l.
  * Copyright (C) 2018 Amarula Solutions B.V.
diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
index 1281bc39b7ab..73d710d34b9d 100644
--- a/arch/arm/boot/dts/imx6dl-icore-rqs.dts
+++ b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright (C) 2016 Amarula Solutions B.V.
  * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts
index 971f9fc39c66..80fa60607ab1 100644
--- a/arch/arm/boot/dts/imx6dl-icore.dts
+++ b/arch/arm/boot/dts/imx6dl-icore.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright (C) 2016 Amarula Solutions B.V.
  * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index dd3226fe5ecd..8e51491e68cf 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -84,6 +84,10 @@
 	status = "okay";
 };
 
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
@@ -164,6 +168,7 @@
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <16 8>;
+		fsl,pmic-stby-poweroff;
 
 		regulators {
 			reg_vddcore: sw1ab {				/* VDDARM_IN */
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
index 707ac9a46115..0edd3043d9c1 100644
--- a/arch/arm/boot/dts/imx6q-apalis-eval.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts
@@ -196,6 +196,8 @@
 };
 
 &pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
 	/* active-high meaning opposite of regular PERST# active-low polarity */
 	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 	reset-gpio-active-high;
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
index 4e1c8feaef82..b94bb687be6b 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
@@ -196,6 +196,8 @@
 };
 
 &pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
 	/* active-high meaning opposite of regular PERST# active-low polarity */
 	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 	reset-gpio-active-high;
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index 469e3d0e2827..302fd6adc8a7 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -200,6 +200,8 @@
 };
 
 &pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
 	/* active-high meaning opposite of regular PERST# active-low polarity */
 	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 	reset-gpio-active-high;
diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/imx6q-icore-mipi.dts
index 95b2efda17b4..d51745268dbf 100644
--- a/arch/arm/boot/dts/imx6q-icore-mipi.dts
+++ b/arch/arm/boot/dts/imx6q-icore-mipi.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright (C) 2017 Engicam S.r.l.
  * Copyright (C) 2017 Amarula Solutions B.V.
@@ -8,10 +8,10 @@
 /dts-v1/;
 
 #include "imx6q.dtsi"
-#include "imx6qdl-icore.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
 
 / {
-	model = "Engicam i.CoreM6 Quad/Dual MIPI Starter Kit";
+	model = "Engicam i.CoreM6 1.5 Quad/Dual MIPI Starter Kit";
 	compatible = "engicam,imx6-icore", "fsl,imx6q";
 };
 
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
index 49b60ca20e6d..81cc346dd149 100644
--- a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2016 Amarula Solutions B.V.
  * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
index 6e27c8143f82..241811c52b62 100644
--- a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2016 Amarula Solutions B.V.
  * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts
index b81f48c6a8c6..cf6ba724f497 100644
--- a/arch/arm/boot/dts/imx6q-icore-rqs.dts
+++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts
@@ -1,42 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2015 Amarula Solutions B.V.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2015 Engicam S.r.l.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
index 5613dd9dc469..fe28c3cf54c0 100644
--- a/arch/arm/boot/dts/imx6q-icore.dts
+++ b/arch/arm/boot/dts/imx6q-icore.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright (C) 2016 Amarula Solutions B.V.
  * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 0193ee6fe964..8381d24eff7d 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -163,7 +163,7 @@
 
 		aips-bus@2000000 { /* AIPS1 */
 			spba-bus@2000000 {
-				ecspi5: ecspi@2018000 {
+				ecspi5: spi@2018000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 05f07ea3e8c8..3dc99dd8dde1 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -482,10 +482,6 @@
 };
 
 &iomuxc {
-	/* pins used on module */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_moci>;
-
 	pinctrl_apalis_gpio1: gpio2io04grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
diff --git a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
new file mode 100644
index 000000000000..d91d46b5898f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jacopo Mondi <jacopo@jmondi.org>
+ */
+
+#include "imx6qdl-icore.dtsi"
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	phy-mode = "rmii";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index acc3b11fba2a..ba93026ecee8 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -1,42 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright (C) 2015 Amarula Solutions B.V.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2015 Engicam S.r.l.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -316,7 +281,7 @@
 };
 
 &iomuxc {
-	pinctrl_audmux: audmux {
+	pinctrl_audmux: audmuxgrp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
 			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 9ce993776160..84d03c65f4c8 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright (C) 2016 Amarula Solutions B.V.
  * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -310,7 +274,7 @@
 };
 
 &iomuxc {
-	pinctrl_audmux: audmux {
+	pinctrl_audmux: audmuxgrp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
 			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
@@ -349,7 +313,7 @@
 		>;
 	};
 
-	pinctrl_gpmi_nand: gpmi-nand {
+	pinctrl_gpmi_nand: gpminandgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
 			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 9f11f1fcc3e6..a6dc5c42c632 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -4,6 +4,7 @@
 // Copyright 2011 Linaro Ltd.
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	chosen {
@@ -25,6 +26,47 @@
 		};
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		home {
+			label = "Home";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+
+		program {
+			label = "Program";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROGRAM>;
+			wakeup-source;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
 	clocks {
 		codec_osc: anaclk2 {
 			compatible = "fixed-clock";
@@ -375,6 +417,15 @@
 		VLC-supply = <&reg_audio>;
 	};
 
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_egalax_int>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &i2c3 {
@@ -410,6 +461,12 @@
 			>;
 		};
 
+		pinctrl_egalax_int: egalax-intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
+			>;
+		};
+
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
 				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
@@ -446,6 +503,16 @@
 			>;
 		};
 
+		pinctrl_gpio_keys: gpiokeysgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__GPIO1_IO11		0x1b0b0
+				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x1b0b0
+				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12		0x1b0b0
+				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b0
+				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			>;
+		};
+
 		pinctrl_gpio_leds: gpioledsgrp {
 			fsl,pins = <
 				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 381bf61fcd28..b7d5fb421404 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -8,6 +8,10 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	sound {
 		compatible = "fsl,imx6-wandboard-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 7fff3717cf7c..85e79a33bcd4 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -813,6 +813,10 @@
 	status = "okay";
 };
 
+&snvs_rtc {
+	status = "disabled";
+};
+
 &ssi1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 61d2d26afbf4..e4daf150881a 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -317,7 +317,7 @@
 					status = "disabled";
 				};
 
-				ecspi1: ecspi@2008000 {
+				ecspi1: spi@2008000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -331,7 +331,7 @@
 					status = "disabled";
 				};
 
-				ecspi2: ecspi@200c000 {
+				ecspi2: spi@200c000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -345,7 +345,7 @@
 					status = "disabled";
 				};
 
-				ecspi3: ecspi@2010000 {
+				ecspi3: spi@2010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -359,7 +359,7 @@
 					status = "disabled";
 				};
 
-				ecspi4: ecspi@2014000 {
+				ecspi4: spi@2014000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 7a4f5dace902..7a3ae7160c12 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -168,7 +168,7 @@
 					status = "disabled";
 				};
 
-				ecspi1: ecspi@2008000 {
+				ecspi1: spi@2008000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
@@ -180,7 +180,7 @@
 					status = "disabled";
 				};
 
-				ecspi2: ecspi@200c000 {
+				ecspi2: spi@200c000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
@@ -192,7 +192,7 @@
 					status = "disabled";
 				};
 
-				ecspi3: ecspi@2010000 {
+				ecspi3: spi@2010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
@@ -204,7 +204,7 @@
 					status = "disabled";
 				};
 
-				ecspi4: ecspi@2014000 {
+				ecspi4: spi@2014000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 000e6136a9d6..ed9a980bce85 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -375,10 +375,12 @@
 				reg = <0x0209c000 0x4000>;
 				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO1>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>;
 			};
 
 			gpio2: gpio@20a0000 {
@@ -386,10 +388,12 @@
 				reg = <0x020a0000 0x4000>;
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO2>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 50 32>;
 			};
 
 			gpio3: gpio@20a4000 {
@@ -397,10 +401,14 @@
 				reg = <0x020a4000 0x4000>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO3>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>,
+					      <&iomuxc 16 101 2>, <&iomuxc 18 5 1>,
+					      <&iomuxc 21 6 11>;
 			};
 
 			gpio4: gpio@20a8000 {
@@ -408,10 +416,20 @@
 				reg = <0x020a8000 0x4000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO4>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>,
+					      <&iomuxc 16 151 1>, <&iomuxc 17 149 1>,
+					      <&iomuxc 18 146 1>, <&iomuxc 19 144 1>,
+					      <&iomuxc 20 142 1>, <&iomuxc 21 143 1>,
+					      <&iomuxc 22 150 1>, <&iomuxc 23 148 1>,
+					      <&iomuxc 24 147 1>, <&iomuxc 25 145 1>,
+					      <&iomuxc 26 152 1>, <&iomuxc 27 125 1>,
+					      <&iomuxc 28 131 1>, <&iomuxc 29 134 1>,
+					      <&iomuxc 30 129 1>, <&iomuxc 31 133 1>;
 			};
 
 			gpio5: gpio@20ac000 {
@@ -419,10 +437,22 @@
 				reg = <0x020ac000 0x4000>;
 				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO5>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>,
+					      <&iomuxc 2 132 1>, <&iomuxc 3 130 1>,
+					      <&iomuxc 4 127 1>, <&iomuxc 5 126 1>,
+					      <&iomuxc 6 120 1>, <&iomuxc 7 123 1>,
+					      <&iomuxc 8 118 1>, <&iomuxc 9 122 1>,
+					      <&iomuxc 10 124 1>, <&iomuxc 11 117 1>,
+					      <&iomuxc 12 121 1>, <&iomuxc 13 119 1>,
+					      <&iomuxc 14 116 1>, <&iomuxc 15 115 1>,
+					      <&iomuxc 16 140 2>, <&iomuxc 18 136 1>,
+					      <&iomuxc 19 138 1>, <&iomuxc 20 139 1>,
+					      <&iomuxc 21 137 1>;
 			};
 
 			gpio6: gpio@20b0000 {
@@ -430,6 +460,7 @@
 				reg = <0x020b0000 0x4000>;
 				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO6>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index f8f31872fa14..53b3408b5fab 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -40,12 +40,14 @@
 			label = "Volume Up";
 			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
 		};
 
 		volume-down {
 			label = "Volume Down";
 			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 844caa39364f..95a3c1cb877d 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -268,7 +268,7 @@
 					status = "disabled";
 				};
 
-				ecspi1: ecspi@2008000 {
+				ecspi1: spi@2008000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -280,7 +280,7 @@
 					status = "disabled";
 				};
 
-				ecspi2: ecspi@200c000 {
+				ecspi2: spi@200c000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -292,7 +292,7 @@
 					status = "disabled";
 				};
 
-				ecspi3: ecspi@2010000 {
+				ecspi3: spi@2010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -304,7 +304,7 @@
 					status = "disabled";
 				};
 
-				ecspi4: ecspi@2014000 {
+				ecspi4: spi@2014000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
@@ -1079,7 +1079,7 @@
 				status = "disabled";
 			};
 
-			qspi1: qspi@21e0000 {
+			qspi1: spi@21e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6sx-qspi";
@@ -1092,7 +1092,7 @@
 				status = "disabled";
 			};
 
-			qspi2: qspi@21e4000 {
+			qspi2: spi@21e4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6sx-qspi";
@@ -1273,7 +1273,7 @@
 				status = "disabled";
 			};
 
-			ecspi5: ecspi@228c000 {
+			ecspi5: spi@228c000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
new file mode 100644
index 000000000000..11966d12af76
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Digi International's ConnectCore6UL SBC Pro board device tree source
+ *
+ * Copyright 2018 Digi International, Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6ul.dtsi"
+#include "imx6ul-ccimx6ulsom.dtsi"
+
+/ {
+	model = "Digi International ConnectCore 6UL SBC Pro.";
+	compatible = "digi,ccimx6ulsbcpro", "digi,ccimx6ulsom", "fsl,imx6ul";
+
+	lcd_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm5 0 50000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&ext_3v3>;
+	status = "okay";
+};
+
+/* CAN2 is multiplexed with UART2 RTS/CTS */
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&ext_3v3>;
+	status = "disabled";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_master>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <26>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			smsc,disable-energy-detect;
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			smsc,disable-energy-detect;
+			reg = <1>;
+		};
+	};
+};
+
+&gpio5 {
+	emmc-usd-mux {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat0_17
+		     &pinctrl_lcdif_clken
+		     &pinctrl_lcdif_hvsync>;
+	lcd-supply = <&ldo4_ext>;       /* BU90T82 LVDS bridge power */
+	status = "okay";
+};
+
+&ldo4_ext {
+	regulator-max-microvolt = <1800000>;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&pwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm5>;
+	status = "okay";
+};
+
+&pwm6 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&pwm8 {
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_sai2>;
+	pinctrl-1 = <&pinctrl_sai2_sleep>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			  <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>,
+			  <&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-rates = <0>, <786432000>, <12288000>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	status = "okay";
+};
+
+/* UART2 RTS/CTS muxed with CAN2 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_4wires>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* UART3 RTS/CTS muxed with CAN 1 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_2wires>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* USDHC2 (microSD conflicts with eMMC) */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	broken-cd;	/* no carrier detect line (use polling) */
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			/* EXP_GPIO_2 -> GPIO1_3/ADC1_IN3 */
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03        0xb0
+		>;
+	};
+
+	pinctrl_ecspi1_master: ecspi1grp1 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x10b0
+			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x10b0
+			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x10b0
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x10b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x40017051
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x40017051
+		>;
+	};
+
+	pinctrl_enet2_mdio: mdioenet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp{
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+		>;
+	};
+	pinctrl_flexcan2: flexcan2grp{
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+		>;
+	};
+
+	pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+		>;
+	};
+
+	pinctrl_lcdif_clken: lcdifctrlgrp1 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x17050
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+		>;
+	};
+
+	pinctrl_lcdif_hvsync: lcdifctrlgrp2 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__PWM4_OUT          0x110b0
+		>;
+	};
+
+	pinctrl_pwm5: pwm5grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__PWM5_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			/* Interrupt */
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x10b0
+		>;
+	};
+
+	pinctrl_sai2_sleep: sai2grp-sleep {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x3000
+			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x3000
+			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x3000
+			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x3000
+			/* Interrupt */
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x3000
+		>;
+	};
+
+	pinctrl_uart2_4wires: uart2grp-4wires {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_2wires: uart3grp-2wires {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10039
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
+			/* Mux selector between eMMC/SD# */
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x79
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x17059
+			MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts
index d81d20f8fc8d..e22ec5be2b78 100644
--- a/arch/arm/boot/dts/imx6ul-geam.dts
+++ b/arch/arm/boot/dts/imx6ul-geam.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright (C) 2016 Amarula Solutions B.V.
  * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -328,7 +292,7 @@
 		>;
 	};
 
-	pinctrl_gpmi_nand: gpmi-nand {
+	pinctrl_gpmi_nand: gpminandgrp {
 		fsl,pins = <
 			MX6UL_PAD_NAND_CLE__RAWNAND_CLE         0xb0b1
 			MX6UL_PAD_NAND_ALE__RAWNAND_ALE         0xb0b1
diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
index f5b422898e61..1df3e376ae2c 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
+++ b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright (C) 2016 Amarula Solutions B.V.
  * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -50,28 +14,5 @@
 };
 
 &usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
-	bus-width = <8>;
-	no-1-8-v;
 	status = "okay";
 };
-
-&iomuxc {
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK      0x17070
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD      0x10070
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0  0x17070
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1  0x17070
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2  0x17070
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3  0x17070
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4  0x17070
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5  0x17070
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6  0x17070
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7  0x17070
-			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B   0x17070
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
index de15e1c75dd1..8c26d4d1a7bf 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-nand.dts
+++ b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright (C) 2016 Amarula Solutions B.V.
  * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -50,30 +14,5 @@
 };
 
 &gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
 	status = "okay";
 };
-
-&iomuxc {
-	pinctrl_gpmi_nand: gpmi-nand {
-		fsl,pins = <
-			MX6UL_PAD_NAND_CLE__RAWNAND_CLE         0xb0b1
-			MX6UL_PAD_NAND_ALE__RAWNAND_ALE         0xb0b1
-			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B       0xb0b1
-			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
-			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B     0xb0b1
-			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B       0xb0b1
-			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B       0xb0b1
-			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00   0xb0b1
-			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01   0xb0b1
-			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02   0xb0b1
-			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03   0xb0b1
-			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04   0xb0b1
-			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05   0xb0b1
-			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0xb0b1
-			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07   0xb0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi
index cd9928551154..b1fa3f0a684d 100644
--- a/arch/arm/boot/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright (C) 2016 Amarula Solutions B.V.
  * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -133,6 +97,13 @@
 	};
 };
 
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@@ -243,6 +214,15 @@
 	status = "okay";
 };
 
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+	bus-width = <8>;
+	no-1-8-v;
+	status = "disabled";
+};
+
 &iomuxc {
 	pinctrl_enet1: enet1grp {
 		fsl,pins = <
@@ -259,6 +239,26 @@
 		>;
 	};
 
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE         0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE         0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B       0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B     0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B       0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B       0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00   0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01   0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02   0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03   0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04   0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05   0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07   0xb0b1
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
@@ -366,4 +366,20 @@
 			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
 		>;
 	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK      0x17070
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD      0x10070
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0  0x17070
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1  0x17070
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2  0x17070
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3  0x17070
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4  0x17070
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5  0x17070
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6  0x17070
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7  0x17070
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B   0x17070
+		>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 6dc0b569acdf..083d3446c41d 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -89,6 +89,8 @@
 				      "pll1_sys";
 			arm-supply = <&reg_arm>;
 			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 	};
 
@@ -156,7 +158,6 @@
 		compatible = "arm,cortex-a7-pmu";
 		interrupt-parent = <&gpc>;
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
 	};
 
 	soc {
@@ -218,7 +219,7 @@
 				reg = <0x02000000 0x40000>;
 				ranges;
 
-				ecspi1: ecspi@2008000 {
+				ecspi1: spi@2008000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -230,7 +231,7 @@
 					status = "disabled";
 				};
 
-				ecspi2: ecspi@200c000 {
+				ecspi2: spi@200c000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -242,7 +243,7 @@
 					status = "disabled";
 				};
 
-				ecspi3: ecspi@2010000 {
+				ecspi3: spi@2010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -254,7 +255,7 @@
 					status = "disabled";
 				};
 
-				ecspi4: ecspi@2014000 {
+				ecspi4: spi@2014000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
@@ -918,6 +919,17 @@
 				reg = <0x021b0000 0x4000>;
 			};
 
+			weim: weim@21b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
+				reg = <0x021b8000 0x4000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_EIM>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
+			};
+
 			ocotp: ocotp-ctrl@21bc000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -932,6 +944,10 @@
 				tempmon_temp_grade: temp-grade@20 {
 					reg = <0x20 4>;
 				};
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
 			};
 
 			lcdif: lcdif@21c8000 {
@@ -945,7 +961,7 @@
 				status = "disabled";
 			};
 
-			qspi: qspi@21e0000 {
+			qspi: spi@21e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
index 30ef60344af3..0ba64546c13b 100644
--- a/arch/arm/boot/dts/imx6ull-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
@@ -45,7 +45,7 @@
 #include "imx6ul-14x14-evk.dtsi"
 
 / {
-	model = "Freescale i.MX6 UlltraLite 14x14 EVK Board";
+	model = "Freescale i.MX6 UltraLiteLite 14x14 EVK Board";
 	compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
 };
 
diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h
index fdc46bb09cc1..a282a31a4bae 100644
--- a/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ b/arch/arm/boot/dts/imx6ull-pinfunc.h
@@ -14,14 +14,38 @@
  * The pin function ID is a tuple of
  * <mux_reg conf_reg input_reg mux_mode input_val>
  */
+/* signals common for i.MX6UL and i.MX6ULL */
+#undef MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX                    0x00BC 0x0348 0x0644 0x0 0x6
+#undef MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX                    0x00C0 0x034C 0x0644 0x0 0x7
+#undef MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS                     0x00CC 0x0358 0x0640 0x1 0x5
+#undef MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS                  0x00D0 0x035C 0x0640 0x1 0x6
+#undef MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS
+#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS                      0x01EC 0x0478 0x0640 0x8 0x7
+
+/* signals for i.MX6ULL only */
+#define MX6ULL_PAD_UART1_TX_DATA__UART5_DCE_TX                    0x0084 0x0310 0x0000 0x9 0x0
 #define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX                    0x0084 0x0310 0x0644 0x9 0x4
 #define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX                    0x0088 0x0314 0x0644 0x9 0x5
-#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_RTS                     0x008C 0x0318 0x0640 0x9 0x3
-#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_RTS                     0x0090 0x031C 0x0640 0x9 0x4
-#define MX6ULL_PAD_UART5_TX_DATA__UART5_DTE_RX                    0x00BC 0x0348 0x0644 0x0 0x6
-#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX                    0x00C0 0x034C 0x0644 0x0 0x7
-#define MX6ULL_PAD_ENET1_RX_EN__UART5_DCE_RTS                     0x00CC 0x0358 0x0640 0x1 0x5
-#define MX6ULL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS                  0x00D0 0x035C 0x0640 0x1 0x6
+#define MX6ULL_PAD_UART1_RX_DATA__UART5_DTE_TX                    0x0088 0x0314 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_CTS                     0x008C 0x0318 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_CTS_B__UART5_DTE_RTS                     0x008C 0x0318 0x0640 0x9 0x3
+#define MX6ULL_PAD_UART1_RTS_B__UART5_DCE_RTS                     0x0090 0x031C 0x0640 0x9 0x4
+#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_CTS                     0x0090 0x031C 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART4_RX_DATA__EPDC_PWRCTRL01                  0x00B8 0x0344 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_TX_DATA__EPDC_PWRCTRL02                  0x00BC 0x0348 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_RX_DATA__EPDC_PWRCTRL03                  0x00C0 0x034C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_DATA0__EPDC_SDCE04                    0x00C4 0x0350 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_DATA1__EPDC_SDCE05                    0x00C8 0x0354 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_EN__EPDC_SDCE06                       0x00CC 0x0358 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_DATA0__EPDC_SDCE07                    0x00D0 0x035C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_DATA1__EPDC_SDCE08                    0x00D4 0x0360 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_EN__EPDC_SDCE09                       0x00D8 0x0364 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_CLK__EPDC_SDOED                       0x00DC 0x0368 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_ER__EPDC_SDOEZ                        0x00E0 0x036C 0x0000 0x9 0x0
 #define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08                    0x00E4 0x0370 0x0000 0x9 0x0
 #define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09                    0x00E8 0x0374 0x0000 0x9 0x0
 #define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10                       0x00EC 0x0378 0x0000 0x9 0x0
@@ -48,6 +72,8 @@
 #define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK                         0x0158 0x03E4 0x0000 0x9 0x0
 #define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP                          0x015C 0x03E8 0x0000 0x9 0x0
 #define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1                         0x016C 0x03F8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA22__EPDC_SDCE02                        0x0170 0x03FC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA23__EPDC_SDCE03                        0x0174 0x0400 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2                         0x01D4 0x0460 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3                       0x01D8 0x0464 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1                        0x01DC 0x0468 0x0000 0x9 0x0
@@ -55,7 +81,6 @@
 #define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK                     0x01E4 0x0470 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK                     0x01E8 0x0474 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS                         0x01EC 0x0478 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA02__UART5_DCE_RTS                      0x01EC 0x0478 0x0640 0x8 0x7
 #define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK                        0x01F0 0x047C 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index cd1776a7015a..796ed35d4ac9 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -22,7 +22,7 @@
 	>;
 	fsl,soc-operating-points = <
 		/* KHz	uV */
-		900000	1175000
+		900000	1250000
 		792000	1175000
 		528000	1175000
 		396000	1175000
diff --git a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
new file mode 100644
index 000000000000..6f1af240e0ce
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+/dts-v1/;
+
+#include "imx6ulz.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
+
+/delete-node/ &fec1;
+/delete-node/ &fec2;
+/delete-node/ &lcdif;
+/delete-node/ &tsc;
+
+/ {
+	model = "Freescale i.MX6 ULZ 14x14 EVK Board";
+	compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
+
+	/delete-node/ panel;
+};
diff --git a/arch/arm/boot/dts/imx6ulz.dtsi b/arch/arm/boot/dts/imx6ulz.dtsi
new file mode 100644
index 000000000000..ae6d7e593769
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ulz.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+#include "imx6ull.dtsi"
+
+/ {
+	aliases {
+		/delete-property/ ethernet0;
+		/delete-property/ ethernet1;
+		/delete-property/ i2c2;
+		/delete-property/ i2c3;
+		/delete-property/ serial4;
+		/delete-property/ serial5;
+		/delete-property/ serial6;
+		/delete-property/ serial7;
+		/delete-property/ spi2;
+		/delete-property/ spi3;
+	};
+};
+
+/delete-node/ &adc1;
+/delete-node/ &can1;
+/delete-node/ &can2;
+/delete-node/ &ecspi3;
+/delete-node/ &ecspi4;
+/delete-node/ &epit2;
+/delete-node/ &gpt2;
+/delete-node/ &i2c3;
+/delete-node/ &i2c4;
+/delete-node/ &pwm5;
+/delete-node/ &pwm6;
+/delete-node/ &pwm7;
+/delete-node/ &pwm8;
+/delete-node/ &uart5;
+/delete-node/ &uart6;
+/delete-node/ &uart7;
+/delete-node/ &uart8;
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index c9b3c60b0eb2..f1bafdaa7e1a 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -27,12 +27,14 @@
 			label = "Volume Up";
 			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
 		};
 
 		volume-down {
 			label = "Volume Down";
 			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index efbdeaaa8dcd..826224bf7f4f 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -20,6 +20,7 @@
 			reg = <1>;
 			clock-frequency = <996000000>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-idle-states = <&cpu_sleep_wait>;
 		};
 	};
 
@@ -63,9 +64,11 @@
 			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 			clock-names = "apb_pclk";
 
-			port {
-				etm1_out_port: endpoint {
-					remote-endpoint = <&ca_funnel_in_port1>;
+			out-ports {
+				port {
+					etm1_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port1>;
+					};
 				};
 			};
 		};
@@ -153,11 +156,13 @@
 	};
 };
 
-&ca_funnel_ports {
+&ca_funnel_in_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
 	port@1 {
 		reg = <1>;
 		ca_funnel_in_port1: endpoint {
-			slave-mode;
 			remote-endpoint = <&etm1_out_port>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index fa390da636de..f7ba2c0a24ad 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -1,44 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2016 NXP Semiconductors.
  * Author: Fabio Estevam <fabio.estevam@nxp.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -216,6 +179,13 @@
 	status = "okay";
 };
 
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
 &i2c4 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@@ -346,6 +316,13 @@
 		>;
 	};
 
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA	0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL	0x4000007f
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
 			MX7D_PAD_I2C4_SCL__I2C4_SCL	0x4000007f
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index a052198f6e96..aa8df7d93b2e 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -54,6 +54,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		idle-states {
+			entry-method = "psci";
+
+			cpu_sleep_wait: cpu-sleep-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <100>;
+				exit-latency-us = <50>;
+				min-residency-us = <1000>;
+			};
+		};
+
 		cpu0: cpu@0 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
@@ -61,6 +74,7 @@
 			clock-frequency = <792000000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clks IMX7D_CLK_ARM>;
+			cpu-idle-states = <&cpu_sleep_wait>;
 		};
 	};
 
@@ -106,7 +120,7 @@
 		 */
 		compatible = "arm,coresight-replicator";
 
-		ports {
+		out-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 				/* replicator output ports */
@@ -123,12 +137,11 @@
 					remote-endpoint = <&etr_in_port>;
 				};
 			};
+		};
 
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
+		in-ports {
+			port {
 				replicator_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&etf_out_port>;
 				};
 			};
@@ -168,28 +181,23 @@
 			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 			clock-names = "apb_pclk";
 
-			ca_funnel_ports: ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/* funnel input ports */
-				port@0 {
-					reg = <0>;
+			ca_funnel_in_ports: in-ports {
+				port {
 					ca_funnel_in_port0: endpoint {
-						slave-mode;
 						remote-endpoint = <&etm0_out_port>;
 					};
 				};
 
-				/* funnel output port */
-				port@2 {
-					reg = <0>;
+				/* the other input ports are not connect to anything */
+			};
+
+			out-ports {
+				port {
 					ca_funnel_out_port0: endpoint {
 						remote-endpoint = <&hugo_funnel_in_port0>;
 					};
 				};
 
-				/* the other input ports are not connect to anything */
 			};
 		};
 
@@ -200,9 +208,11 @@
 			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 			clock-names = "apb_pclk";
 
-			port {
-				etm0_out_port: endpoint {
-					remote-endpoint = <&ca_funnel_in_port0>;
+			out-ports {
+				port {
+					etm0_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port0>;
+					};
 				};
 			};
 		};
@@ -213,15 +223,13 @@
 			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 			clock-names = "apb_pclk";
 
-			ports {
+			in-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				/* funnel input ports */
 				port@0 {
 					reg = <0>;
 					hugo_funnel_in_port0: endpoint {
-						slave-mode;
 						remote-endpoint = <&ca_funnel_out_port0>;
 					};
 				};
@@ -229,18 +237,18 @@
 				port@1 {
 					reg = <1>;
 					hugo_funnel_in_port1: endpoint {
-						slave-mode; /* M4 input */
+						/* M4 input */
 					};
 				};
+				/* the other input ports are not connect to anything */
+			};
 
-				port@2 {
-					reg = <0>;
+			out-ports {
+				port {
 					hugo_funnel_out_port0: endpoint {
 						remote-endpoint = <&etf_in_port>;
 					};
 				};
-
-				/* the other input ports are not connect to anything */
 			};
 		};
 
@@ -250,20 +258,16 @@
 			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 			clock-names = "apb_pclk";
 
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+			in-ports {
+				port {
 					etf_in_port: endpoint {
-						slave-mode;
 						remote-endpoint = <&hugo_funnel_out_port0>;
 					};
 				};
+			};
 
-				port@1 {
-					reg = <0>;
+			out-ports {
+				port {
 					etf_out_port: endpoint {
 						remote-endpoint = <&replicator_in_port0>;
 					};
@@ -277,10 +281,11 @@
 			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 			clock-names = "apb_pclk";
 
-			port {
-				etr_in_port: endpoint {
-					slave-mode;
-					remote-endpoint = <&replicator_out_port1>;
+			in-ports {
+				port {
+					etr_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port1>;
+					};
 				};
 			};
 		};
@@ -291,10 +296,11 @@
 			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 			clock-names = "apb_pclk";
 
-			port {
-				tpiu_in_port: endpoint {
-					slave-mode;
-					remote-endpoint = <&replicator_out_port0>;
+			in-ports {
+				port {
+					tpiu_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port0>;
+					};
 				};
 			};
 		};
@@ -563,14 +569,6 @@
 					clock-names = "snvs-rtc";
 				};
 
-				snvs_poweroff: snvs-poweroff {
-					compatible = "syscon-poweroff";
-					regmap = <&snvs>;
-					offset = <0x38>;
-					value = <0x60>;
-					mask = <0x60>;
-				};
-
 				snvs_pwrkey: snvs-powerkey {
 					compatible = "fsl,sec-v4.0-pwrkey";
 					regmap = <&snvs>;
@@ -644,7 +642,7 @@
 				status = "disabled";
 			};
 
-			ecspi4: ecspi@30630000 {
+			ecspi4: spi@30630000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
@@ -725,7 +723,7 @@
 				reg = <0x30800000 0x100000>;
 				ranges;
 
-				ecspi1: ecspi@30820000 {
+				ecspi1: spi@30820000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
@@ -737,7 +735,7 @@
 					status = "disabled";
 				};
 
-				ecspi2: ecspi@30830000 {
+				ecspi2: spi@30830000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
@@ -749,7 +747,7 @@
 					status = "disabled";
 				};
 
-				ecspi3: ecspi@30840000 {
+				ecspi3: spi@30840000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
@@ -974,6 +972,25 @@
 				status = "disabled";
 			};
 
+			mu0a: mailbox@30aa0000 {
+				compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_MU_ROOT_CLK>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu0b: mailbox@30ab0000 {
+				compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
+				reg = <0x30ab0000 0x10000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_MU_ROOT_CLK>;
+				#mbox-cells = <2>;
+				fsl,mu-side-b;
+				status = "disabled";
+			};
+
 			usbotg1: usb@30b10000 {
 				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x30b10000 0x200>;
diff --git a/arch/arm/boot/dts/imx7ulp-pinfunc.h b/arch/arm/boot/dts/imx7ulp-pinfunc.h
index fe511775b518..85f6b017803a 100644
--- a/arch/arm/boot/dts/imx7ulp-pinfunc.h
+++ b/arch/arm/boot/dts/imx7ulp-pinfunc.h
@@ -116,6 +116,7 @@
 #define IMX7ULP_PAD_PTC13__LPI2C7_SDA                                0x0034 0x030c 0x5 0x1
 #define IMX7ULP_PAD_PTC13__TPM7_CLKIN                                0x0034 0x02f4 0x6 0x1
 #define IMX7ULP_PAD_PTC13__FB_AD13                                   0x0034 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC13__USB0_ID                                   0x0034 0x0338 0xb 0x1
 #define IMX7ULP_PAD_PTC14__PTC14                                     0x0038 0x0000 0x1 0x0
 #define IMX7ULP_PAD_PTC14__TRACE_D1                                  0x0038 0x0000 0xa 0x0
 #define IMX7ULP_PAD_PTC14__FXIO1_D10                                 0x0038 0x022c 0x2 0x1
@@ -136,6 +137,7 @@
 #define IMX7ULP_PAD_PTC16__LPSPI3_SIN                                0x0040 0x0324 0x3 0x1
 #define IMX7ULP_PAD_PTC16__TPM7_CH2                                  0x0040 0x02e4 0x6 0x1
 #define IMX7ULP_PAD_PTC16__FB_ALE_FB_CS1_B_FB_TS_B                   0x0040 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC16__USB1_OC2                                  0x0040 0x0334 0xb 0x1
 #define IMX7ULP_PAD_PTC17__PTC17                                     0x0044 0x0000 0x1 0x0
 #define IMX7ULP_PAD_PTC17__FXIO1_D13                                 0x0044 0x0238 0x2 0x1
 #define IMX7ULP_PAD_PTC17__LPSPI3_SOUT                               0x0044 0x0328 0x3 0x1
@@ -146,11 +148,16 @@
 #define IMX7ULP_PAD_PTC18__LPSPI3_SCK                                0x0048 0x0320 0x3 0x1
 #define IMX7ULP_PAD_PTC18__TPM6_CH0                                  0x0048 0x02d0 0x6 0x1
 #define IMX7ULP_PAD_PTC18__FB_OE_B                                   0x0048 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC18__USB0_ID                                   0x0048 0x0338 0xb 0x2
+#define IMX7ULP_PAD_PTC18__VIU_DE                                    0x0048 0x033c 0xc 0x1
 #define IMX7ULP_PAD_PTC19__PTC19                                     0x004c 0x0000 0x1 0x0
 #define IMX7ULP_PAD_PTC19__FXIO1_D15                                 0x004c 0x0240 0x2 0x1
 #define IMX7ULP_PAD_PTC19__LPSPI3_PCS0                               0x004c 0x0310 0x3 0x1
 #define IMX7ULP_PAD_PTC19__TPM6_CH1                                  0x004c 0x02d4 0x6 0x1
 #define IMX7ULP_PAD_PTC19__FB_A16                                    0x004c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC19__USB0_ID                                   0x004c 0x0338 0xa 0x3
+#define IMX7ULP_PAD_PTC19__USB1_PWR2                                 0x004c 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTC19__VIU_DE                                    0x004c 0x033c 0xc 0x3
 #define IMX7ULP_PAD_PTD0__PTD0                                       0x0080 0x0000 0x1 0x0
 #define IMX7ULP_PAD_PTD0__SDHC0_RESET_B                              0x0080 0x0000 0x8 0x0
 #define IMX7ULP_PAD_PTD1__PTD1                                       0x0084 0x0000 0x1 0x0
@@ -218,6 +225,7 @@
 #define IMX7ULP_PAD_PTE5__LPI2C5_SDA                                 0x0114 0x02c0 0x5 0x2
 #define IMX7ULP_PAD_PTE5__TPM5_CH0                                   0x0114 0x02c4 0x6 0x2
 #define IMX7ULP_PAD_PTE5__SDHC1_D2                                   0x0114 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE5__VIU_DE                                     0x0114 0x033c 0xc 0x2
 #define IMX7ULP_PAD_PTE6__PTE6                                       0x0118 0x0000 0x1 0x0
 #define IMX7ULP_PAD_PTE6__FXIO1_D25                                  0x0118 0x0000 0x2 0x0
 #define IMX7ULP_PAD_PTE6__LPSPI2_SCK                                 0x0118 0x02ac 0x3 0x2
@@ -226,8 +234,10 @@
 #define IMX7ULP_PAD_PTE6__TPM7_CH3                                   0x0118 0x02e8 0x6 0x2
 #define IMX7ULP_PAD_PTE6__SDHC1_D4                                   0x0118 0x0000 0x8 0x0
 #define IMX7ULP_PAD_PTE6__FB_A17                                     0x0118 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE6__USB0_OC                                    0x0118 0x0330 0xb 0x1
 #define IMX7ULP_PAD_PTE7__PTE7                                       0x011c 0x0000 0x1 0x0
 #define IMX7ULP_PAD_PTE7__TRACE_D7                                   0x011c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE7__USB0_PWR                                   0x011c 0x0000 0xb 0x0
 #define IMX7ULP_PAD_PTE7__VIU_FID                                    0x011c 0x0000 0xc 0x0
 #define IMX7ULP_PAD_PTE7__FXIO1_D24                                  0x011c 0x0000 0x2 0x0
 #define IMX7ULP_PAD_PTE7__LPSPI2_PCS0                                0x011c 0x029c 0x3 0x2
@@ -278,6 +288,7 @@
 #define IMX7ULP_PAD_PTE11__FB_A20                                    0x012c 0x0000 0x9 0x0
 #define IMX7ULP_PAD_PTE12__PTE12                                     0x0130 0x0000 0x1 0x0
 #define IMX7ULP_PAD_PTE12__TRACE_D2                                  0x0130 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE12__USB1_OC2                                  0x0130 0x0334 0xb 0x2
 #define IMX7ULP_PAD_PTE12__VIU_D20                                   0x0130 0x0000 0xc 0x0
 #define IMX7ULP_PAD_PTE12__FXIO1_D19                                 0x0130 0x0000 0x2 0x0
 #define IMX7ULP_PAD_PTE12__LPSPI3_SIN                                0x0130 0x0324 0x3 0x2
@@ -288,6 +299,7 @@
 #define IMX7ULP_PAD_PTE12__FB_A21                                    0x0130 0x0000 0x9 0x0
 #define IMX7ULP_PAD_PTE13__PTE13                                     0x0134 0x0000 0x1 0x0
 #define IMX7ULP_PAD_PTE13__TRACE_D1                                  0x0134 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE13__USB1_PWR2                                 0x0134 0x0000 0xb 0x0
 #define IMX7ULP_PAD_PTE13__VIU_D21                                   0x0134 0x0000 0xc 0x0
 #define IMX7ULP_PAD_PTE13__FXIO1_D18                                 0x0134 0x0000 0x2 0x0
 #define IMX7ULP_PAD_PTE13__LPSPI3_SOUT                               0x0134 0x0328 0x3 0x2
@@ -298,6 +310,7 @@
 #define IMX7ULP_PAD_PTE13__FB_A22                                    0x0134 0x0000 0x9 0x0
 #define IMX7ULP_PAD_PTE14__PTE14                                     0x0138 0x0000 0x1 0x0
 #define IMX7ULP_PAD_PTE14__TRACE_D0                                  0x0138 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE14__USB0_OC                                   0x0138 0x0330 0xb 0x2
 #define IMX7ULP_PAD_PTE14__VIU_D22                                   0x0138 0x0000 0xc 0x0
 #define IMX7ULP_PAD_PTE14__FXIO1_D17                                 0x0138 0x0000 0x2 0x0
 #define IMX7ULP_PAD_PTE14__LPSPI3_SCK                                0x0138 0x0320 0x3 0x2
@@ -308,6 +321,7 @@
 #define IMX7ULP_PAD_PTE14__FB_A23                                    0x0138 0x0000 0x9 0x0
 #define IMX7ULP_PAD_PTE15__PTE15                                     0x013c 0x0000 0x1 0x0
 #define IMX7ULP_PAD_PTE15__TRACE_CLKOUT                              0x013c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE15__USB0_PWR                                  0x013c 0x0000 0xb 0x0
 #define IMX7ULP_PAD_PTE15__VIU_D23                                   0x013c 0x0000 0xc 0x0
 #define IMX7ULP_PAD_PTE15__FXIO1_D16                                 0x013c 0x0000 0x2 0x0
 #define IMX7ULP_PAD_PTE15__LPSPI3_PCS0                               0x013c 0x0310 0x3 0x2
@@ -315,7 +329,7 @@
 #define IMX7ULP_PAD_PTE15__TPM6_CH1                                  0x013c 0x02d4 0x6 0x2
 #define IMX7ULP_PAD_PTE15__FB_A24                                    0x013c 0x0000 0x9 0x0
 #define IMX7ULP_PAD_PTF0__PTF0                                       0x0180 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF0__VIU_DE                                     0x0180 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF0__VIU_DE                                     0x0180 0x033c 0xc 0x0
 #define IMX7ULP_PAD_PTF0__LPUART4_CTS_B                              0x0180 0x0244 0x4 0x3
 #define IMX7ULP_PAD_PTF0__LPI2C4_SCL                                 0x0180 0x0278 0x5 0x3
 #define IMX7ULP_PAD_PTF0__TPM4_CLKIN                                 0x0180 0x0298 0x6 0x3
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 5cae74eb6cdd..ca9154dd8052 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -160,10 +160,6 @@
 	clock-frequency = <100000000>;
 };
 
-&pciec {
-	status = "okay";
-};
-
 &pfc {
 	can0_pins: can0 {
 		groups = "can0_data_d";
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 738b44cf2b0b..1c833105d6c5 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -416,7 +416,7 @@
 			clock-names = "fck", "mmchsdb_fck";
 		};
 
-		qspi: qspi@2940000 {
+		qspi: spi@2940000 {
 			compatible = "ti,k2g-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index abff7ef7c9cd..b7303a4e4236 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -179,7 +179,7 @@
 			 * ssp0 and spi1 are shared pins;
 			 * enable one in your board dts, as needed.
 			 */
-			ssp0: ssp@20084000 {
+			ssp0: spi@20084000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x20084000 0x1000>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
@@ -199,7 +199,7 @@
 			 * ssp1 and spi2 are shared pins;
 			 * enable one in your board dts, as needed.
 			 */
-			ssp1: ssp@2008c000 {
+			ssp1: spi@2008c000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x2008c000 0x1000>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 499f41a2c6f0..923a25760516 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -1,5 +1,6 @@
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -235,6 +236,7 @@
 		#size-cells = <1>;
 		compatible = "cfi-flash";
 		reg = <0x0 0x0 0x8000000>;
+		big-endian;
 		bank-width = <2>;
 		device-width = <1>;
 	};
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index f0c949d74833..8b48c3c7cd21 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -1,5 +1,6 @@
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -203,6 +204,7 @@
 		#size-cells = <1>;
 		compatible = "cfi-flash";
 		reg = <0x0 0x0 0x8000000>;
+		big-endian;
 		bank-width = <2>;
 		device-width = <1>;
 	};
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index f18490548c78..bdd6e66a79ad 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -163,7 +163,7 @@
 			big-endian;
 		};
 
-		qspi: quadspi@1550000 {
+		qspi: spi@1550000 {
 			compatible = "fsl,ls1021a-qspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -330,7 +330,7 @@
 			};
 		};
 
-		dspi0: dspi@2100000 {
+		dspi0: spi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -343,7 +343,7 @@
 			status = "disabled";
 		};
 
-		dspi1: dspi@2110000 {
+		dspi1: spi@2110000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -364,6 +364,8 @@
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 39>, <&edma0 1 38>;
 			status = "disabled";
 		};
 
@@ -375,6 +377,8 @@
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 37>, <&edma0 1 36>;
 			status = "disabled";
 		};
 
@@ -386,6 +390,8 @@
 			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 35>, <&edma0 1 34>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index d77dcf890cfc..7162e0ca05b0 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -194,7 +194,7 @@
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		compatible = "amlogic,meson8-clkc";
-		reg = <0x8000 0x4>, <0x4000 0x460>;
+		reg = <0x8000 0x4>, <0x4000 0x400>;
 	};
 
 	reset: reset-controller@4404 {
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
new file mode 100644
index 000000000000..0872f6e3abf5
--- /dev/null
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "meson8b.dtsi"
+
+/ {
+	model = "Endless Computers Endless Mini";
+	compatible = "endless,ec100", "amlogic,meson8b";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		pal-switch {
+			label = "pal";
+			linux,input-type = <EV_SW>;
+			linux,code = <KEY_SWITCHVIDEOMODE>;
+			gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
+		};
+
+		ntsc-switch {
+			label = "ntsc";
+			linux,input-type = <EV_SW>;
+			linux,code = <KEY_SWITCHVIDEOMODE>;
+			gpios = <&gpio GPIOH_8 GPIO_ACTIVE_HIGH>;
+		};
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio GPIOH_9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		/*
+		 * shutdown is managed by the EC (embedded micro-controller)
+		 * which is configured through GPIOAO_2 (poweroff GPIO) and
+		 * GPIOAO_7 (power LED, which has to go LOW as well).
+		 */
+		gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		timeout-ms = <20000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "ec100:red:power";
+			/*
+			 * Needs to go LOW (together with the poweroff GPIO)
+			 * during shutdown to allow the EC (embedded
+			 * micro-controller) to shutdown the system. Setting
+			 * the output to LOW signals the EC to start a
+			 * "breathing"/pulsing effect until the power is fully
+			 * turned off.
+			 */
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_5v: regulator-vcc5v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC5V";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcck: regulator-vcck {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwms = <&pwm_cd 0 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	snps,reset-gpio = <&gpio GPIOH_4 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101A/G (0x02430c54) */
+			reg = <0>;
+		};
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+
+	rt5640: codec@1c {
+		compatible = "realtek,rt5640";
+		reg = <0x1c>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */
+		realtek,in1-differential;
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+		cd-inverted;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_c1_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_XTAL>;
+	clock-names = "clkin0";
+};
+
+/* exposed through the pin headers labeled "URDUG1" on the top of the PCB */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/*
+ * connected to the Bluetooth part of the RTL8723BS SDIO wifi / Bluetooth
+ * combo chip. This is only available on the variant with 2GB RAM.
+ */
+&uart_B {
+	status = "okay";
+	pinctrl-0 = <&uart_b0_pins>, <&uart_b0_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&usb1 {
+	status = "okay";
+	vbus-supply = <&usb_vbus>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index ef3177d3da3d..58669abda259 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -57,6 +57,10 @@
 		mmc0 = &sd_card_slot;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		reg = <0x40000000 0x40000000>;
 	};
@@ -71,6 +75,14 @@
 		};
 	};
 
+	p5v0: regulator-p5v0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "P5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
 	tflash_vdd: regulator-tflash_vdd {
 		/*
 		 * signal name from schematics: TFLASH_VDD_EN
@@ -81,6 +93,8 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
+		vin-supply = <&vcc_3v3>;
+
 		gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
@@ -92,6 +106,8 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 
+		vin-supply = <&vcc_3v3>;
+
 		/*
 		 * signal name from schematics: TF_3V3N_1V8_EN
 		 */
@@ -101,6 +117,86 @@
 		states = <3300000 0
 			  1800000 1>;
 	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		/*
+		 * RICHTEK RT9179 configured for a fixed output voltage of
+		 * 1.8V. This supplies not only VCC1V8 but also IOREF_1V8 and
+		 * VDD1V8 according to the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&p5v0>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		/*
+		 * Monolithic Power Systems MP2161 configured for a fixed
+		 * output voltage of 3.3V. This supplies not only VCC3V3 but
+		 * also VDD3V3 and VDDIO_AO3V3 according to the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&p5v0>;
+	};
+
+	vcck: regulator-vcck {
+		/* Monolithic Power Systems MP2161 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		vin-supply = <&p5v0>;
+
+		pwms = <&pwm_cd 0 12218 0>;
+		pwm-dutycycle-range = <91 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddc_ddr: regulator-vddc-ddr {
+		/*
+		 * Monolithic Power Systems MP2161 configured for a fixed
+		 * output voltage of 1.5V. This supplies not only DDR_VDDC but
+		 * also DDR3_1V5 according to the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "DDR_VDDC";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		vin-supply = <&p5v0>;
+	};
+
+	vdd_rtc: regulator-vdd-rtc {
+		/*
+		 * Torex Semiconductor XC6215 configured for a fixed output of
+		 * 0.9V.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_RTC";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&vcc_3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
 };
 
 &ethmac {
@@ -154,6 +250,11 @@
 	pinctrl-names = "default";
 };
 
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
 &sdio {
 	status = "okay";
 
@@ -180,6 +281,14 @@
 	};
 };
 
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_c1_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_XTAL>;
+	clock-names = "clkin0";
+};
+
 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 08f7f6be7254..cd1ca9dda126 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -163,7 +163,7 @@
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		compatible = "amlogic,meson8b-clkc";
-		reg = <0x8000 0x4>, <0x4000 0x460>;
+		reg = <0x8000 0x4>, <0x4000 0x400>;
 	};
 
 	reset: reset-controller@4404 {
@@ -223,6 +223,28 @@
 			};
 		};
 
+		eth_rmii_pins: eth-rmii {
+			mux {
+				groups = "eth_tx_en",
+					 "eth_txd1_0",
+					 "eth_txd0_0",
+					 "eth_rx_clk",
+					 "eth_rx_dv",
+					 "eth_rxd1",
+					 "eth_rxd0",
+					 "eth_mdio_en",
+					 "eth_mdc";
+				function = "ethernet";
+			};
+		};
+
+		i2c_a_pins: i2c-a {
+			mux {
+				groups = "i2c_sda_a", "i2c_sck_a";
+				function = "i2c_a";
+			};
+		};
+
 		sd_b_pins: sd-b {
 			mux {
 				groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
@@ -230,6 +252,29 @@
 				function = "sd_b";
 			};
 		};
+
+		pwm_c1_pins: pwm-c1 {
+			mux {
+				groups = "pwm_c1";
+				function = "pwm_c";
+			};
+		};
+
+		uart_b0_pins: uart-b0 {
+			mux {
+				groups = "uart_tx_b0",
+				       "uart_rx_b0";
+				function = "uart_b";
+			};
+		};
+
+		uart_b0_cts_rts_pins: uart-b0-cts-rts {
+			mux {
+				groups = "uart_cts_b0",
+				       "uart_rts_b0";
+				function = "uart_b";
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 1cdc346a05e8..d01bdee6f2f3 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/power/mt2701-power.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/phy/phy.h>
+#include <dt-bindings/memory/mt2701-larb-port.h>
 #include <dt-bindings/reset/mt2701-resets.h>
 #include <dt-bindings/thermal/thermal.h>
 
@@ -121,6 +122,15 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	system_clk: dummy13m {
 		compatible = "fixed-clock";
 		clock-frequency = <13000000>;
@@ -277,6 +287,17 @@
 		clock-names = "system-clk", "rtc-clk";
 	};
 
+	smi_common: smi@1000c000 {
+		compatible = "mediatek,mt7623-smi-common",
+			     "mediatek,mt2701-smi-common";
+		reg = <0 0x1000c000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_SMI>,
+			 <&mmsys CLK_MM_SMI_COMMON>,
+			 <&infracfg CLK_INFRA_SMI>;
+		clock-names = "apb", "smi", "async";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
 	pwrap: pwrap@1000d000 {
 		compatible = "mediatek,mt7623-pwrap",
 			     "mediatek,mt2701-pwrap";
@@ -308,6 +329,17 @@
 		reg = <0 0x10200100 0 0x1c>;
 	};
 
+	iommu: mmsys_iommu@10205000 {
+		compatible = "mediatek,mt7623-m4u",
+			     "mediatek,mt2701-m4u";
+		reg = <0 0x10205000 0 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,larbs = <&larb0 &larb1 &larb2>;
+		#iommu-cells = <1>;
+	};
+
 	efuse: efuse@10206000 {
 		compatible = "mediatek,mt7623-efuse",
 			     "mediatek,mt8173-efuse";
@@ -683,6 +715,90 @@
 		status = "disabled";
 	};
 
+	g3dsys: syscon@13000000 {
+		compatible = "mediatek,mt7623-g3dsys",
+			     "mediatek,mt2701-g3dsys",
+			     "syscon";
+		reg = <0 0x13000000 0 0x200>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	mmsys: syscon@14000000 {
+		compatible = "mediatek,mt7623-mmsys",
+			     "mediatek,mt2701-mmsys",
+			     "syscon";
+		reg = <0 0x14000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb0: larb@14010000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x14010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <0>;
+		clocks = <&mmsys CLK_MM_SMI_LARB0>,
+			 <&mmsys CLK_MM_SMI_LARB0>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
+	imgsys: syscon@15000000 {
+		compatible = "mediatek,mt7623-imgsys",
+			     "mediatek,mt2701-imgsys",
+			     "syscon";
+		reg = <0 0x15000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb2: larb@15001000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x15001000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <2>;
+		clocks = <&imgsys CLK_IMG_SMI_COMM>,
+			 <&imgsys CLK_IMG_SMI_COMM>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+	};
+
+	jpegdec: jpegdec@15004000 {
+		compatible = "mediatek,mt7623-jpgdec",
+			     "mediatek,mt2701-jpgdec";
+		reg = <0 0x15004000 0 0x1000>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
+			  <&imgsys CLK_IMG_JPGDEC>;
+		clock-names = "jpgdec-smi",
+			      "jpgdec";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+		mediatek,larb = <&larb2>;
+		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+	};
+
+	vdecsys: syscon@16000000 {
+		compatible = "mediatek,mt7623-vdecsys",
+			     "mediatek,mt2701-vdecsys",
+			     "syscon";
+		reg = <0 0x16000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb1: larb@16010000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x16010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <1>;
+		clocks = <&vdecsys CLK_VDEC_CKGEN>,
+			 <&vdecsys CLK_VDEC_LARB>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+	};
+
 	hifsys: syscon@1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
@@ -937,6 +1053,14 @@
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
 		status = "disabled";
 	};
+
+	bdpsys: syscon@1c000000 {
+		compatible = "mediatek,mt7623-bdpsys",
+			     "mediatek,mt2701-bdpsys",
+			     "syscon";
+		reg = <0 0x1c000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
 };
 
 &pio {
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index f1d6de8b3c19..000bf16de651 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -114,7 +114,7 @@
 			dma-names = "tx", "rx";
 		};
 
-		mcspi1: mcspi@48098000 {
+		mcspi1: spi@48098000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi1";
 			reg = <0x48098000 0x100>;
@@ -125,7 +125,7 @@
 				    "tx2", "rx2", "tx3", "rx3";
 		};
 
-		mcspi2: mcspi@4809a000 {
+		mcspi2: spi@4809a000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi2";
 			reg = <0x4809a000 0x100>;
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 84635eeb99cd..7f57af2f10ac 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -285,7 +285,7 @@
 			ti,timer-alwon;
 		};
 
-		mcspi3: mcspi@480b8000 {
+		mcspi3: spi@480b8000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi3";
 			reg = <0x480b8000 0x100>;
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index d80587de0bbf..9985ee2aae0c 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -160,10 +160,11 @@
 
 		clocks = <&emu_src_ck>;
 		clock-names = "apb_pclk";
-		port {
-			etb_in: endpoint {
-				slave-mode;
-				remote-endpoint = <&etm_out>;
+		in-ports {
+			port {
+				etb_in: endpoint {
+					remote-endpoint = <&etm_out>;
+				};
 			};
 		};
 	};
@@ -174,9 +175,11 @@
 
 		clocks = <&emu_src_ck>;
 		clock-names = "apb_pclk";
-		port {
-			etm_out: endpoint {
-				remote-endpoint = <&etb_in>;
+		out-ports {
+			port {
+				etm_out: endpoint {
+					remote-endpoint = <&etb_in>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 3ca8991a6c3e..91bb50ad9a4f 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -147,10 +147,11 @@
 
 		clocks = <&emu_src_ck>;
 		clock-names = "apb_pclk";
-		port {
-			etb_in: endpoint {
-				slave-mode;
-				remote-endpoint = <&etm_out>;
+		in-ports {
+			port {
+				etb_in: endpoint {
+					remote-endpoint = <&etm_out>;
+				};
 			};
 		};
 	};
@@ -161,9 +162,11 @@
 
 		clocks = <&emu_src_ck>;
 		clock-names = "apb_pclk";
-		port {
-			etm_out: endpoint {
-				remote-endpoint = <&etb_in>;
+		out-ports {
+			port {
+				etm_out: endpoint {
+					remote-endpoint = <&etb_in>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index ac830b917776..d5fe55392230 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -10,6 +10,7 @@
 /dts-v1/;
 
 #include "omap36xx.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "OMAP3 GTA04";
@@ -28,6 +29,7 @@
 
 	aliases {
 		display0 = &lcd;
+		display1 = &tv0;
 	};
 
 	/* fixed 26MHz oscillator */
@@ -42,12 +44,27 @@
 
 		aux-button {
 			label = "aux";
-			linux,code = <169>;
+			linux,code = <KEY_PHONE>;
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			wakeup-source;
 		};
 	};
 
+	antenna-detect {
+		compatible = "gpio-keys";
+
+		gps_antenna_button: gps-antenna-button {
+			label = "GPS_EXT_ANT";
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LINEIN_INSERT>;
+			gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */
+			interrupt-parent = <&gpio5>;
+			interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
 	sound {
 		compatible = "ti,omap-twl4030";
 		ti,model = "gta04";
@@ -55,7 +72,7 @@
 		ti,mcbsp = <&mcbsp2>;
 	};
 
-	 /* GSM audio */
+	/* GSM audio */
 	sound_telephony {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "GTA04 voice";
@@ -78,7 +95,7 @@
 		#sound-dai-cells = <0>;
 	};
 
-	spi_lcd {
+	spi_lcd: spi_lcd {
 		compatible = "spi-gpio";
 		#address-cells = <0x1>;
 		#size-cells = <0x0>;
@@ -131,7 +148,7 @@
 	};
 
 	tv0: connector {
-		compatible = "svideo-connector";
+		compatible = "composite-video-connector";
 		label = "tv";
 
 		port {
@@ -143,7 +160,7 @@
 
 	tv_amp: opa362 {
 		compatible = "ti,opa362";
-		enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;	/* GPIO_23 to enable video out amplifier */
 
 		ports {
 			#address-cells = <1>;
@@ -169,6 +186,42 @@
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>;	/* W2CBW003 reset through tca6507 */
 	};
+
+	/* devconf0 setup for mcbsp1 clock pins */
+	pinmux_mcbsp1@48002274 {
+		compatible = "pinctrl-single";
+		reg = <0x48002274 4>;   /* CONTROL_DEVCONF0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,bit-per-mux;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x7>;	/* MCBSP1 CLK pinmux */
+		#pinctrl-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcbsp1_devconf0_pins>;
+		mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins {
+			/*                   offset bits mask */
+			pinctrl-single,bits = <0x00 0x08 0x1c>;	/* set MCBSP1_CLKR */
+		};
+	};
+
+	/* devconf1 setup for tvout pins */
+	pinmux_tv_out@480022d8 {
+		compatible = "pinctrl-single";
+		reg = <0x480022d8 4>;	/* CONTROL_DEVCONF1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,bit-per-mux;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x81>;	/* TV out pin control */
+		#pinctrl-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tv_acbias_devconf1_pins>;
+		tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins {
+			/*			offset	bits	mask */
+			pinctrl-single,bits = <0x00 0x40800 0x40800>;	/* set TVOUTBYPASS and TVOUTACEN */
+		};
+	};
 };
 
 &omap3_pmx_core {
@@ -220,14 +273,14 @@
 		>;
 	};
 
-	backlight_pins: backlight_pins_pimnux {
+	backlight_pins: backlight_pins_pinmux {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3)		/* gpt11/gpio57 */
 		>;
 	};
 
 	dss_dpi_pins: pinmux_dss_dpi_pins {
-               pinctrl-single,pins = <
+		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
 			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
@@ -265,6 +318,12 @@
 		>;
 	};
 
+	bmp085_pins: pinmux_bmp085_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */
+		>;
+	};
+
 	bma180_pins: pinmux_bma180_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
@@ -282,6 +341,78 @@
 			OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
 		>;
 	};
+
+	penirq_pins: pinmux_penirq_pins {
+		pinctrl-single,pins = <
+			/* here we could enable to wakeup the cpu from suspend by a pen touch */
+			OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
+		>;
+	};
+
+	camera_pins: pinmux_camera_pins {
+		pinctrl-single,pins = <
+			/* set up parallel camera interface */
+			OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */
+			OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */
+			OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
+			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */
+			OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */
+			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */
+			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */
+			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */
+			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */
+			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */
+			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */
+			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */
+			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */
+			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */
+			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */
+			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+			OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+			OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */
+			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */
+			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */
+			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_clkr.mcbsp1_fsr */
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dx */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dr */
+			/* mcbsp_clks is used as PENIRQ */
+			/* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0)	/* mcbsp_clks.mcbsp_clks */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0)	/* mcbsp_clks.mcbsp1_fsx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0)	/* mcbsp1_clkx.mcbsp1_clkx */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2_dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2_dx */
+		>;
+	};
+
+	mcbsp3_pins: pinmux_mcbsp3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0)	/* mcbsp3_dx.mcbsp3_dx */
+			OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0)	/* mcbsp3_dx.mcbsp3_dr */
+			OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0)	/* mcbsp3_clkx.mcbsp3_clkx */
+			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0)	/* mcbsp3_clkx.mcbsp3_fsx */
+		>;
+	};
+
+	mcbsp4_pins: pinmux_mcbsp4_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp4_clkx.mcbsp4_clkx */
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp4_clkx.mcbsp4_dr */
+			OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp4_dx.mcbsp4_fsx */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
@@ -347,6 +478,8 @@
 	bmp085@77 {
 		compatible = "bosch,bmp085";
 		reg = <0x77>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bmp085_pins>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
 	};
@@ -402,7 +535,7 @@
 			reg = <0x4>;
 		};
 
-		wifi_reset: wifi_reset@6 {
+		wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
 			reg = <0x6>;
 			compatible = "gpio";
 		};
@@ -422,10 +555,19 @@
 	tsc2007@48 {
 		compatible = "ti,tsc2007";
 		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&penirq_pins>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
-		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
+		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;	/* GPIO_160 */
 		ti,x-plate-ohms = <600>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <640>;
+		touchscreen-max-pressure = <1000>;
+		touchscreen-fuzz-x = <3>;
+		touchscreen-fuzz-y = <8>;
+		touchscreen-fuzz-pressure = <10>;
+		touchscreen-inverted-y;
 	};
 
 	/* RFID EEPROM */
@@ -462,6 +604,7 @@
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
 	ti,non-removable;
+	broken-cd;	/* hardware has no CD */
 };
 
 &mmc2 {
@@ -476,6 +619,19 @@
 	status = "disabled";
 };
 
+#define BIT(x) (1 << (x))
+&twl_gpio {
+	/* pullups: BIT(2) */
+	ti,pullups = <BIT(2)>;
+	/*
+	 * pulldowns:
+	 * BIT(0),  BIT(1), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) |
+			 BIT(13) | BIT(15) | BIT(16) | BIT(17))>;
+};
+
 &twl_keypad {
 	status = "disabled";
 };
@@ -493,6 +649,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 };
 
 &charger {
@@ -510,7 +667,7 @@
 &vaux2 {
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
-	regulator-always-on;
+	regulator-always-on;	/* we should never switch off while vio is on! */
 };
 
 /* camera */
@@ -531,6 +688,12 @@
 	regulator-max-microvolt = <3150000>;
 };
 
+/* Needed to power the DPI pins */
+
+&vpll2 {
+	regulator-always-on;
+};
+
 &dss {
 	pinctrl-names = "default";
 	pinctrl-0 = < &dss_dpi_pins >;
@@ -551,10 +714,14 @@
 
 	vdda-supply = <&vdac>;
 
+	#address-cells = <1>;
+	#size-cells = <0>;
+
 	port {
+		reg = <0>;
 		venc_out: endpoint {
 			remote-endpoint = <&opa_in>;
-			ti,channels = <2>;
+			ti,channels = <1>;
 			ti,invert-polarity;
 		};
 	};
@@ -569,27 +736,27 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		ti,nand-ecc-opt = "ham1";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-		gpmc,sync-clk-ps = <0>;
+		gpmc,device-width = <2>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
 		gpmc,cs-wr-off-ns = <44>;
 		gpmc,adv-on-ns = <6>;
 		gpmc,adv-rd-off-ns = <34>;
 		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
 		gpmc,oe-off-ns = <54>;
+		gpmc,we-off-ns = <40>;
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
-		gpmc,device-width = <2>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
+		gpmc,sync-clk-ps = <0>;
 
 		x-loader@0 {
 			label = "X-Loader";
@@ -598,28 +765,51 @@
 
 		bootloaders@80000 {
 			label = "U-Boot";
-			reg = <0x80000 0x1e0000>;
+			reg = <0x80000 0x1c0000>;
 		};
 
-		bootloaders_env@260000 {
+		bootloaders_env@240000 {
 			label = "U-Boot Env";
-			reg = <0x260000 0x20000>;
+			reg = <0x240000 0x40000>;
 		};
 
 		kernel@280000 {
 			label = "Kernel";
-			reg = <0x280000 0x400000>;
+			reg = <0x280000 0x600000>;
 		};
 
-		filesystem@680000 {
+		filesystem@880000 {
 			label = "File System";
-			reg = <0x680000 0xf980000>;
+			reg = <0x880000 0>;	/* 0 = MTDPART_SIZ_FULL */
 		};
 	};
 };
 
-&mcbsp2 {
-	status = "okay";
+&mcbsp1 { /* FM Transceiver PCM */
+	status = "ok";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 { /* TPS65950 I2S */
+	status = "ok";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&mcbsp3 { /* Bluetooth PCM */
+	status = "ok";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp3_pins>;
+};
+
+&mcbsp4 { /* GSM voice PCM */
+	status = "ok";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp4_pins>;
 };
 
 &hdqw1w {
@@ -627,6 +817,22 @@
         pinctrl-0 = <&hdq_pins>;
 };
 
-&mcbsp4 {
-	status = "okay";
+/* image signal processor within OMAP3 SoC */
+&isp {
+	ports {
+		port@0 {
+			reg = <0>;
+			parallel_ep: endpoint {
+				ti,isp-clock-divisor = <1>;
+				ti,strobe-mode;
+				bus-width = <8>;/* Used data lines */
+				data-shift = <2>; /* Lines 9:2 are used */
+				hsync-active = <0>; /* Active low */
+				vsync-active = <1>; /* Active high */
+				data-active = <1>;/* Active high */
+				pclk-sample = <1>;/* Falling */
+			};
+		};
+		/* port@1 and port@2 are not used by GTA04 */
+	};
 };
diff --git a/arch/arm/boot/dts/omap3-gta04a3.dts b/arch/arm/boot/dts/omap3-gta04a3.dts
index 3099a892cf50..cc9244956679 100644
--- a/arch/arm/boot/dts/omap3-gta04a3.dts
+++ b/arch/arm/boot/dts/omap3-gta04a3.dts
@@ -9,7 +9,7 @@
 #include "omap3-gta04.dtsi"
 
 / {
-	model = "Goldelico GTA04A3";
+	model = "Goldelico GTA04A3/Letux 2804";
 };
 
 &i2c2 {
diff --git a/arch/arm/boot/dts/omap3-gta04a4.dts b/arch/arm/boot/dts/omap3-gta04a4.dts
index c918bb1f0529..77afc711fe4f 100644
--- a/arch/arm/boot/dts/omap3-gta04a4.dts
+++ b/arch/arm/boot/dts/omap3-gta04a4.dts
@@ -9,5 +9,5 @@
 #include "omap3-gta04.dtsi"
 
 / {
-	model = "Goldelico GTA04A4";
+	model = "Goldelico GTA04A4/Letux 2804";
 };
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
index 600b6ca5a1bd..bd232b1b24cb 100644
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com>
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -9,9 +9,132 @@
 #include "omap3-gta04.dtsi"
 
 / {
-	model = "Goldelico GTA04A5";
+	model = "Goldelico GTA04A5/Letux 2804";
 
 	sound {
-		ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;    /* GTA04A5 only */
+		ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;	/* GTA04A5 only */
+	};
+
+	wlan_en: wlan_en_regulator {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_pins>;
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* GPIO_138 */
+
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pps_pins>;
+
+		gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */
+	};
+
+};
+
+&gpio5 {
+	irda_en {
+		gpio-hog;
+		gpios = <(175-160) GPIO_ACTIVE_HIGH>;
+		output-high;	/* activate gpio_175 to disable IrDA receiver */
+	};
+};
+
+&omap3_pmx_core {
+	bt_pins: pinmux_bt_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat5 = mmc3_dat1 = gpio137 */
+		>;
+	};
+
+	wlan_pins: pinmux_wlan_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat6 = mmc3_dat2 = gpio138 */
+		>;
+	};
+
+	wlan_irq_pin: pinmux_wlan_irq_pin {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4)	/* mmc2_dat7 = mmc3_dat3 = gpio139 */
+		>;
+	};
+
+	irda_pins: pinmux_irda {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* mcspi1_cs1 = gpio175 */
+		>;
+	};
+
+	pps_pins: pinmux_pps_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
+		>;
+	};
+
+};
+
+/*
+ * for WL183x module see
+ * http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+ */
+
+&wifi_pwrseq {
+	/delete-property/ reset-gpios;
+};
+
+&mmc2 {
+	vmmc-supply = <&wlan_en>;
+	bus-width = <4>;
+	cap-power-off-card;
+	non-removable;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&wlan_irq_pin>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/delete-property/ mmc-pwrseq;
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;	/* GPIO_139 */
+		ref-clock-frequency = <26000000>;
+	};
+};
+
+&i2c2 {
+	/delete-node/ bmp085@77;
+	/delete-node/ bma180@41;
+	/delete-node/ itg3200@68;
+	/delete-node/ hmc5843@1e;
+
+	bmg160@69 {
+		compatible = "bosch,bmg160";
+		reg = <0x69>;
+	};
+
+	bmc150@10 {
+		compatible = "bosch,bmc150_accel";
+		reg = <0x10>;
+	};
+
+	bmc150@12 {
+		compatible = "bosch,bmc150_magn";
+		reg = <0x12>;
+	};
+
+	bme280@76 {
+		compatible = "bosch,bme280";
+		reg = <0x76>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-gta04a5one.dts b/arch/arm/boot/dts/omap3-gta04a5one.dts
new file mode 100644
index 000000000000..9b7bbdc344b3
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-gta04a5one.dts
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-gta04a5.dts"
+
+&omap3_pmx_core {
+	model = "Goldelico GTA04A5/Letux 2804 with OneNAND";
+
+	gpmc_pins: pinmux_gpmc_pins {
+		pinctrl-single,pins = <
+
+			/* address lines */
+			OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
+			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
+			OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
+
+			/* data lines, gpmc_d0..d7 not muxable according to TRM */
+			OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
+			OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
+			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
+			OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
+			OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
+			OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
+			OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
+			OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
+
+			/*
+			 * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
+			 * according to TRM. OneNAND seems to require PIN_INPUT on clock.
+			 */
+			OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
+			OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
+		>;
+	};
+};
+
+&gpmc {
+	/* switch inherited setup to OneNAND */
+
+	ranges = <0 0 0x04000000 0x1000000>;	/* CS0: 16MB for OneNAND */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmc_pins>;
+
+	/delete-node/ nand@0,0;
+
+	onenand@0,0 {
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ti,omap2-onenand";
+		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
+
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,burst-write;
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <87>;
+		gpmc,cs-wr-off-ns = <87>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <87>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <87>;
+		gpmc,rd-cycle-ns = <112>;
+		gpmc,wr-cycle-ns = <112>;
+		gpmc,access-ns = <81>;
+		gpmc,page-burst-access-ns = <15>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <81>;
+		gpmc,sync-clk-ps = <15000>;
+
+		x-loader@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+
+		bootloaders_env@240000 {
+			label = "U-Boot Env";
+			reg = <0x240000 0x40000>;
+		};
+
+		kernel@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x600000>;
+		};
+
+		filesystem@880000 {
+			label = "File System";
+			reg = <0x880000 0>;	/* 0 = MTDPART_SIZ_FULL */
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
index ded5fcf084eb..1f91646b8951 100644
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -40,7 +40,7 @@
 };
 
 &i2c3 {
-	ak8975@0f {
+	ak8975@f {
 		compatible = "asahi-kasei,ak8975";
 		reg = <0x0f>;
 	};
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index ab6f640b282b..bf7ca00f4c21 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -700,6 +700,10 @@
 	vbus-supply = <&smps10_out1_reg>;
 };
 
+&dwc3 {
+	dr_mode = "otg";
+};
+
 &mcspi1 {
 
 };
diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi
index ebd93df5d07a..b6c9b85951ea 100644
--- a/arch/arm/boot/dts/orion5x-linkstation.dtsi
+++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi
@@ -156,7 +156,7 @@
 &i2c {
 	status = "okay";
 
-	rtc {
+	rtc@32 {
 		compatible = "ricoh,rs5c372a";
 		reg = <0x32>;
 	};
diff --git a/arch/arm/boot/dts/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/owl-s500-cubieboard6.dts
index ea4e01bce8d1..7c96c59b610d 100644
--- a/arch/arm/boot/dts/owl-s500-cubieboard6.dts
+++ b/arch/arm/boot/dts/owl-s500-cubieboard6.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Cubietech CubieBoard6
  *
  * Copyright (c) 2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
index 7be1d2eaf3f0..e610d49395d2 100644
--- a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
+++ b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016-2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/owl-s500-guitar.dtsi b/arch/arm/boot/dts/owl-s500-guitar.dtsi
index 079b2c02cc13..81cc39871f17 100644
--- a/arch/arm/boot/dts/owl-s500-guitar.dtsi
+++ b/arch/arm/boot/dts/owl-s500-guitar.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * LeMaker Guitar SoM
  *
  * Copyright (c) 2016-2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
 #include "owl-s500.dtsi"
diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
index 43c9980a4260..5ceb6cc4451d 100644
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ b/arch/arm/boot/dts/owl-s500.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Actions Semi S500 SoC
  *
  * Copyright (c) 2016-2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi
index 95d59be97213..8494b5787170 100644
--- a/arch/arm/boot/dts/pxa25x.dtsi
+++ b/arch/arm/boot/dts/pxa25x.dtsi
@@ -80,6 +80,10 @@
 			#pwm-cells = <1>;
 			clocks = <&clks CLK_PWM1>;
 		};
+
+		rtc@40900000 {
+			clocks = <&clks CLK_OSC32k768>;
+		};
 	};
 
 	timer@40a00000 {
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index 747f750f675d..3228ad5fb725 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -71,7 +71,7 @@
 			clocks = <&clks CLK_PWM1>;
 		};
 
-		pwri2c: i2c@40f000180 {
+		pwri2c: i2c@40f00180 {
 			compatible = "mrvl,pxa-i2c";
 			reg = <0x40f00180 0x24>;
 			interrupts = <6>;
@@ -113,6 +113,10 @@
 
 			status = "disabled";
 		};
+
+		rtc@40900000 {
+			clocks = <&clks CLK_OSC32k768>;
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
index a520b4c14ea9..080d5c5169b5 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -9,6 +9,25 @@
 #include "skeleton.dtsi"
 #include "dt-bindings/clock/pxa-clock.h"
 
+#define PMGROUP(pin) #pin
+#define PMMUX(func, pin, af)			\
+	mux- ## func {				\
+		groups = PMGROUP(P ## pin);	\
+		function = #af;			\
+	}
+#define PMMUX_LPM_LOW(func, pin, af)		\
+	mux- ## func {				\
+		groups = PMGROUP(P ## pin);	\
+		function = #af;			\
+		low-power-disable;		\
+	}
+#define PMMUX_LPM_HIGH(func, pin, af)		\
+	mux- ## func {				\
+		groups = PMGROUP(P ## pin);	\
+		function = #af;			\
+		low-power-enable;		\
+	}
+
 / {
 	model = "Marvell PXA2xx family SoC";
 	compatible = "marvell,pxa2xx";
@@ -76,7 +95,7 @@
 			};
 		};
 
-		ffuart: uart@40100000 {
+		ffuart: serial@40100000 {
 			compatible = "mrvl,pxa-uart";
 			reg = <0x40100000 0x30>;
 			interrupts = <22>;
@@ -84,7 +103,7 @@
 			status = "disabled";
 		};
 
-		btuart: uart@40200000 {
+		btuart: serial@40200000 {
 			compatible = "mrvl,pxa-uart";
 			reg = <0x40200000 0x30>;
 			interrupts = <21>;
@@ -92,7 +111,7 @@
 			status = "disabled";
 		};
 
-		stuart: uart@40700000 {
+		stuart: serial@40700000 {
 			compatible = "mrvl,pxa-uart";
 			reg = <0x40700000 0x30>;
 			interrupts = <20>;
@@ -100,7 +119,7 @@
 			status = "disabled";
 		};
 
-		hwuart: uart@41100000 {
+		hwuart: serial@41100000 {
 			compatible = "mrvl,pxa-uart";
 			reg = <0x41100000 0x30>;
 			interrupts = <7>;
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 4a99c9255104..48c3cf427610 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1611,10 +1611,11 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 
-			port {
-				etb_in: endpoint {
-					slave-mode;
-					remote-endpoint = <&replicator_out0>;
+			in-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint = <&replicator_out0>;
+					};
 				};
 			};
 		};
@@ -1626,10 +1627,11 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 
-			port {
-				tpiu_in: endpoint {
-					slave-mode;
-					remote-endpoint = <&replicator_out1>;
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint = <&replicator_out1>;
+					};
 				};
 			};
 		};
@@ -1640,7 +1642,7 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 
-			ports {
+			out-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1656,10 +1658,11 @@
 						remote-endpoint = <&tpiu_in>;
 					};
 				};
-				port@2 {
-					reg = <0>;
+			};
+
+			in-ports {
+				port {
 					replicator_in: endpoint {
-						slave-mode;
 						remote-endpoint = <&funnel_out>;
 					};
 				};
@@ -1673,7 +1676,7 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 
-			ports {
+			in-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1687,33 +1690,31 @@
 				port@0 {
 					reg = <0>;
 					funnel_in0: endpoint {
-						slave-mode;
 						remote-endpoint = <&etm0_out>;
 					};
 				};
 				port@1 {
 					reg = <1>;
 					funnel_in1: endpoint {
-						slave-mode;
 						remote-endpoint = <&etm1_out>;
 					};
 				};
 				port@4 {
 					reg = <4>;
 					funnel_in4: endpoint {
-						slave-mode;
 						remote-endpoint = <&etm2_out>;
 					};
 				};
 				port@5 {
 					reg = <5>;
 					funnel_in5: endpoint {
-						slave-mode;
 						remote-endpoint = <&etm3_out>;
 					};
 				};
-				port@8 {
-					reg = <0>;
+			};
+
+			out-ports {
+				port {
 					funnel_out: endpoint {
 						remote-endpoint = <&replicator_in>;
 					};
@@ -1730,9 +1731,11 @@
 
 			cpu = <&CPU0>;
 
-			port {
-				etm0_out: endpoint {
-					remote-endpoint = <&funnel_in0>;
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&funnel_in0>;
+					};
 				};
 			};
 		};
@@ -1746,9 +1749,11 @@
 
 			cpu = <&CPU1>;
 
-			port {
-				etm1_out: endpoint {
-					remote-endpoint = <&funnel_in1>;
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&funnel_in1>;
+					};
 				};
 			};
 		};
@@ -1762,9 +1767,11 @@
 
 			cpu = <&CPU2>;
 
-			port {
-				etm2_out: endpoint {
-					remote-endpoint = <&funnel_in4>;
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&funnel_in4>;
+					};
 				};
 			};
 		};
@@ -1778,9 +1785,11 @@
 
 			cpu = <&CPU3>;
 
-			port {
-				etm3_out: endpoint {
-					remote-endpoint = <&funnel_in5>;
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&funnel_in5>;
+					};
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 78db67337ed4..2d56008d8d6b 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -52,78 +52,85 @@
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
-			enable-method = "qcom,kpss-acc-v1";
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
 			reg = <0x0>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			operating-points = <
-				/* kHz	uV (fixed) */
-				48000	1100000
-				200000	1100000
-				500000	1100000
-				716000  1100000
-			>;
 			clock-latency = <256000>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
-			enable-method = "qcom,kpss-acc-v1";
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
 			reg = <0x1>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			operating-points = <
-				/* kHz	uV (fixed) */
-				48000	1100000
-				200000	1100000
-				500000	1100000
-				666000	1100000
-			>;
 			clock-latency = <256000>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
-			enable-method = "qcom,kpss-acc-v1";
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
 			qcom,acc = <&acc2>;
 			qcom,saw = <&saw2>;
 			reg = <0x2>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			operating-points = <
-				/* kHz	uV (fixed) */
-				48000	1100000
-				200000	1100000
-				500000	1100000
-				666000	1100000
-			>;
 			clock-latency = <256000>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
-			enable-method = "qcom,kpss-acc-v1";
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
 			qcom,acc = <&acc3>;
 			qcom,saw = <&saw3>;
 			reg = <0x3>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			operating-points = <
-				/* kHz	uV (fixed) */
-				48000	1100000
-				200000	1100000
-				500000	1100000
-				666000	1100000
-			>;
 			clock-latency = <256000>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-48000000 {
+			opp-hz = /bits/ 64 <48000000>;
+			clock-latency-ns = <256000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			clock-latency-ns = <256000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <256000>;
+		};
+		opp-716000000 {
+			opp-hz = /bits/ 64 <716000000>;
+			clock-latency-ns = <256000>;
+ 		};
 	};
 
 	pmu {
@@ -291,49 +298,49 @@
 			status = "disabled";
 		};
 
-                acc0: clock-controller@b088000 {
-                        compatible = "qcom,kpss-acc-v1";
-                        reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
-                };
+		acc0: clock-controller@b088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
+		};
 
-                acc1: clock-controller@b098000 {
-                        compatible = "qcom,kpss-acc-v1";
-                        reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
-                };
+		acc1: clock-controller@b098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
+		};
 
-                acc2: clock-controller@b0a8000 {
-                        compatible = "qcom,kpss-acc-v1";
-                        reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
-                };
+		acc2: clock-controller@b0a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
+		};
 
-                acc3: clock-controller@b0b8000 {
-                        compatible = "qcom,kpss-acc-v1";
-                        reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
-                };
+		acc3: clock-controller@b0b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
+		};
 
-                saw0: regulator@b089000 {
-                        compatible = "qcom,saw2";
-                        reg = <0x02089000 0x1000>, <0x0b009000 0x1000>;
+		saw0: regulator@b089000 {
+			compatible = "qcom,saw2";
+			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
                         regulator;
-                };
+		};
 
-                saw1: regulator@b099000 {
-                        compatible = "qcom,saw2";
-                        reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
-                        regulator;
-                };
+		saw1: regulator@b099000 {
+			compatible = "qcom,saw2";
+			reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
+			regulator;
+		};
 
-                saw2: regulator@b0a9000 {
-                        compatible = "qcom,saw2";
-                        reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
-                        regulator;
-                };
+		saw2: regulator@b0a9000 {
+			compatible = "qcom,saw2";
+			reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
+			regulator;
+		};
 
-                saw3: regulator@b0b9000 {
-                        compatible = "qcom,saw2";
-                        reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
-                        regulator;
-                };
+		saw3: regulator@b0b9000 {
+			compatible = "qcom,saw2";
+			reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
+			regulator;
+		};
 
 		blsp1_uart1: serial@78af000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
@@ -387,7 +394,7 @@
 			#size-cells = <2>;
 
 			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
-				  0x82000000 0 0x48000000 0x48000000 0 0x10000000>;
+				  0x82000000 0 0x40300000 0x40300000 0 0x400000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "msi";
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index bcf53e37ed93..554c65e7aa0e 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -2,26 +2,8 @@
 #include "qcom-ipq8064-v1.0.dtsi"
 
 / {
-	model = "Qualcomm IPQ8064/AP148";
-	compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
-
-	aliases {
-		serial0 = &gsbi4_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
+	model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
+	compatible = "qcom,ipq8064-ap148";
 
 	soc {
 		pinmux@800000 {
@@ -31,73 +13,22 @@
 				bias-disable;
 			};
 
-			spi_pins: spi_pins {
+			buttons_pins: buttons_pins {
 				mux {
-					pins = "gpio18", "gpio19", "gpio21";
-					function = "gsbi5";
-					drive-strength = <10>;
-					bias-none;
+					pins = "gpio54", "gpio65";
+					drive-strength = <2>;
+					bias-pull-up;
 				};
 			};
 		};
 
 		gsbi@16300000 {
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
-			serial@16340000 {
+			i2c@16380000 {
 				status = "ok";
-			};
-
-			i2c4: i2c@16380000 {
-				status = "ok";
-
 				clock-frequency = <200000>;
-
 				pinctrl-0 = <&i2c4_pins>;
 				pinctrl-names = "default";
 			};
 		};
-
-		gsbi5: gsbi@1a200000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "ok";
-
-			spi4: spi@1a280000 {
-				status = "ok";
-				spi-max-frequency = <50000000>;
-
-				pinctrl-0 = <&spi_pins>;
-				pinctrl-names = "default";
-
-				cs-gpios = <&qcom_pinmux 20 0>;
-
-				flash: m25p80@0 {
-					compatible = "s25fl256s1";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-
-					partition@0 {
-						label = "rootfs";
-						reg = <0x0 0x1000000>;
-					};
-
-					partition@1 {
-						label = "scratch";
-						reg = <0x1000000 0x1000000>;
-					};
-				};
-			};
-		};
-
-		sata-phy@1b400000 {
-			status = "ok";
-		};
-
-		sata@29000000 {
-			ports-implemented = <0x1>;
-			status = "ok";
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
index e1181194e8d3..e239a0486936 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -1,2 +1,127 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-ipq8064.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
+
+	aliases {
+		serial0 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		gsbi@16300000 {
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			status = "ok";
+
+			serial@16340000 {
+				status = "ok";
+			};
+		};
+
+		gsbi5: gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "ok";
+
+			spi4: spi@1a280000 {
+				status = "ok";
+				spi-max-frequency = <50000000>;
+
+				pinctrl-0 = <&spi_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 20 0>;
+
+				flash: m25p80@0 {
+					compatible = "s25fl256s1";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+
+					partition@0 {
+						label = "rootfs";
+						reg = <0x0 0x1000000>;
+					};
+
+					partition@1 {
+						label = "scratch";
+						reg = <0x1000000 0x1000000>;
+					};
+				};
+			};
+		};
+
+		sata-phy@1b400000 {
+			status = "ok";
+		};
+
+		sata@29000000 {
+			ports-implemented = <0x1>;
+			status = "ok";
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&buttons_pins>;
+			pinctrl-names = "default";
+
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+			button@2 {
+				label = "wps";
+				linux,code = <KEY_WPS_BUTTON>;
+				gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&leds_pins>;
+			pinctrl-names = "default";
+
+			led@7 {
+				label = "led_usb1";
+				gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "usbdev";
+				default-state = "off";
+			};
+
+			led@8 {
+				label = "led_usb3";
+				gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "usbdev";
+				default-state = "off";
+			};
+
+			led@9 {
+				label = "status_led_fail";
+				gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			led@26 {
+				label = "sata_led";
+				gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			led@53 {
+				label = "status_led_pass";
+				gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 70790ac242d1..f793cd1ad6d0 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -2,8 +2,11 @@
 /dts-v1/;
 
 #include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
 #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
@@ -114,6 +117,61 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+
+			pcie0_pins: pcie0_pinmux {
+				mux {
+					pins = "gpio3";
+					function = "pcie1_rst";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			pcie1_pins: pcie1_pinmux {
+				mux {
+					pins = "gpio48";
+					function = "pcie2_rst";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			pcie2_pins: pcie2_pinmux {
+				mux {
+					pins = "gpio63";
+					function = "pcie3_rst";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			spi_pins: spi_pins {
+				mux {
+					pins = "gpio18", "gpio19", "gpio21";
+					function = "gsbi5";
+					drive-strength = <10>;
+					bias-none;
+				};
+			};
+
+			leds_pins: leds_pins {
+				mux {
+					pins = "gpio7", "gpio8", "gpio9",
+					       "gpio26", "gpio53";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+					output-low;
+				};
+			};
+
+			buttons_pins: buttons_pins {
+				mux {
+					pins = "gpio54";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		intc: interrupt-controller@2000000 {
@@ -373,5 +431,233 @@
 			#reset-cells = <1>;
 		};
 
+		pcie0: pci@1b500000 {
+			compatible = "qcom,pcie-ipq8064";
+			reg = <0x1b500000 0x1000
+			       0x1b502000 0x80
+			       0x1b600000 0x100
+			       0x0ff00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000   /* downstream I/O */
+				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
+
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc PCIE_A_CLK>,
+				 <&gcc PCIE_H_CLK>,
+				 <&gcc PCIE_PHY_CLK>,
+				 <&gcc PCIE_AUX_CLK>,
+				 <&gcc PCIE_ALT_REF_CLK>;
+			clock-names = "core", "iface", "phy", "aux", "ref";
+
+			assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc PCIE_ACLK_RESET>,
+				 <&gcc PCIE_HCLK_RESET>,
+				 <&gcc PCIE_POR_RESET>,
+				 <&gcc PCIE_PCI_RESET>,
+				 <&gcc PCIE_PHY_RESET>,
+				 <&gcc PCIE_EXT_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+			pinctrl-0 = <&pcie0_pins>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+			perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+		};
+
+		pcie1: pci@1b700000 {
+			compatible = "qcom,pcie-ipq8064";
+			reg = <0x1b700000 0x1000
+			       0x1b702000 0x80
+			       0x1b800000 0x100
+			       0x31f00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000   /* downstream I/O */
+				  0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
+
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc PCIE_1_A_CLK>,
+				 <&gcc PCIE_1_H_CLK>,
+				 <&gcc PCIE_1_PHY_CLK>,
+				 <&gcc PCIE_1_AUX_CLK>,
+				 <&gcc PCIE_1_ALT_REF_CLK>;
+			clock-names = "core", "iface", "phy", "aux", "ref";
+
+			assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc PCIE_1_ACLK_RESET>,
+				 <&gcc PCIE_1_HCLK_RESET>,
+				 <&gcc PCIE_1_POR_RESET>,
+				 <&gcc PCIE_1_PCI_RESET>,
+				 <&gcc PCIE_1_PHY_RESET>,
+				 <&gcc PCIE_1_EXT_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+			pinctrl-0 = <&pcie1_pins>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+			perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+		};
+
+		pcie2: pci@1b900000 {
+			compatible = "qcom,pcie-ipq8064";
+			reg = <0x1b900000 0x1000
+			       0x1b902000 0x80
+			       0x1ba00000 0x100
+			       0x35f00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000   /* downstream I/O */
+				  0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
+
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc PCIE_2_A_CLK>,
+				 <&gcc PCIE_2_H_CLK>,
+				 <&gcc PCIE_2_PHY_CLK>,
+				 <&gcc PCIE_2_AUX_CLK>,
+				 <&gcc PCIE_2_ALT_REF_CLK>;
+			clock-names = "core", "iface", "phy", "aux", "ref";
+
+			assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc PCIE_2_ACLK_RESET>,
+				 <&gcc PCIE_2_HCLK_RESET>,
+				 <&gcc PCIE_2_POR_RESET>,
+				 <&gcc PCIE_2_PCI_RESET>,
+				 <&gcc PCIE_2_PHY_RESET>,
+				 <&gcc PCIE_2_EXT_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+			pinctrl-0 = <&pcie2_pins>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+			perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+		};
+
+		vsdcc_fixed: vsdcc-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "SDCC Power";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		sdcc1bam:dma@12402000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x8000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc3bam:dma@12182000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x8000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sdcc@12400000 {
+				status          = "disabled";
+				compatible      = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg             = <0x12400000 0x2000>;
+				interrupts      = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks          = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names     = "mclk", "apb_pclk";
+				bus-width       = <8>;
+				max-frequency   = <96000000>;
+				non-removable;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				mmc-ddr-1_8v;
+				vmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+				dma-names = "tx", "rx";
+			};
+
+			sdcc@12180000 {
+				compatible      = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status          = "disabled";
+				reg             = <0x12180000 0x2000>;
+				interrupts      = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks          = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names     = "mclk", "apb_pclk";
+				bus-width       = <8>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency   = <192000000>;
+				#mmc-ddr-1_8v;
+				sd-uhs-sdr104;
+				sd-uhs-ddr50;
+				vqmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+				dma-names = "tx", "rx";
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index c2dc9d09484a..ed8f064d0895 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -241,6 +241,33 @@
 				bias-pull-up;
 			};
 		};
+
+		i2c3_pins: i2c3 {
+			mux {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		i2c12_pins: i2c12 {
+			mux {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		mpu6515_pin: mpu6515 {
+			irq {
+				pins = "gpio73";
+				function = "gpio";
+				bias-disable;
+				input-enable;
+			};
+		};
 	};
 
 	sdhci@f9824900 {
@@ -277,6 +304,62 @@
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 	};
+
+	i2c@f9968000 {
+		status = "ok";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c12_pins>;
+		clock-frequency = <100000>;
+		qcom,src-freq = <50000000>;
+
+		mpu6515@68 {
+			compatible = "invensense,mpu6515";
+			reg = <0x68>;
+			interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>;
+			vddio-supply = <&pm8941_lvs1>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&mpu6515_pin>;
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ak8963@f {
+					compatible = "asahi-kasei,ak8963";
+					reg = <0x0f>;
+					// Currently only works in polling mode.
+					// gpios = <&msmgpio 61 0>;
+					vid-supply = <&pm8941_lvs1>;
+					vdd-supply = <&pm8941_l17>;
+				};
+
+				bmp280@76 {
+					compatible = "bosch,bmp280";
+					reg = <0x76>;
+					vdda-supply = <&pm8941_lvs1>;
+					vddd-supply = <&pm8941_l17>;
+				};
+			};
+		};
+	};
+
+	i2c@f9925000 {
+		status = "ok";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_pins>;
+		clock-frequency = <100000>;
+		qcom,src-freq = <50000000>;
+
+		avago_apds993@39 {
+			compatible = "avago,apds9930";
+			reg = <0x39>;
+			interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
+			vdd-supply = <&pm8941_l17>;
+			vddio-supply = <&pm8941_lvs1>;
+			led-max-microamp = <100000>;
+			amstaos,proximity-diodes = <0>;
+		};
+	};
 };
 
 &spmi_bus {
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index d9019a49b292..aba159d5a95a 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -67,7 +67,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		interrupts = <1 9 0xf04>;
+		interrupts = <GIC_PPI 9 0xf04>;
 
 		CPU0: cpu@0 {
 			compatible = "qcom,krait";
@@ -214,7 +214,7 @@
 
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
-		interrupts = <1 7 0xf04>;
+		interrupts = <GIC_PPI 7 0xf04>;
 	};
 
 	clocks {
@@ -233,17 +233,17 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 2 0xf08>,
-			     <1 3 0xf08>,
-			     <1 4 0xf08>,
-			     <1 1 0xf08>;
+		interrupts = <GIC_PPI 2 0xf08>,
+			     <GIC_PPI 3 0xf08>,
+			     <GIC_PPI 4 0xf08>,
+			     <GIC_PPI 1 0xf08>;
 		clock-frequency = <19200000>;
 	};
 
 	adsp-pil {
 		compatible = "qcom,msm8974-adsp-pil";
 
-		interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+		interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
 				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
 				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -275,7 +275,7 @@
 		qcom,smem = <443>, <429>;
 
 		interrupt-parent = <&intc>;
-		interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
 
 		qcom,ipc = <&apcs 8 10>;
 
@@ -300,7 +300,7 @@
 		qcom,smem = <435>, <428>;
 
 		interrupt-parent = <&intc>;
-		interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
 
 		qcom,ipc = <&apcs 8 14>;
 
@@ -325,7 +325,7 @@
 		qcom,smem = <451>, <431>;
 
 		interrupt-parent = <&intc>;
-		interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
 
 		qcom,ipc = <&apcs 8 18>;
 
@@ -364,7 +364,7 @@
 
 		modem_smsm: modem@1 {
 			reg = <1>;
-			interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -372,7 +372,7 @@
 
 		adsp_smsm: adsp@2 {
 			reg = <2>;
-			interrupts = <0 157 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
 
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -380,7 +380,7 @@
 
 		wcnss_smsm: wcnss@7 {
 			reg = <7>;
-			interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
 
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -445,50 +445,50 @@
 
 			frame@f9021000 {
 				frame-number = <0>;
-				interrupts = <0 8 0x4>,
-					     <0 7 0x4>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9021000 0x1000>,
 				      <0xf9022000 0x1000>;
 			};
 
 			frame@f9023000 {
 				frame-number = <1>;
-				interrupts = <0 9 0x4>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9023000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9024000 {
 				frame-number = <2>;
-				interrupts = <0 10 0x4>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9024000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9025000 {
 				frame-number = <3>;
-				interrupts = <0 11 0x4>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9025000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9026000 {
 				frame-number = <4>;
-				interrupts = <0 12 0x4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9026000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9027000 {
 				frame-number = <5>;
-				interrupts = <0 13 0x4>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9027000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9028000 {
 				frame-number = <6>;
-				interrupts = <0 14 0x4>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9028000 0x1000>;
 				status = "disabled";
 			};
@@ -586,7 +586,7 @@
 		blsp1_uart1: serial@f991d000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991d000 0x1000>;
-			interrupts = <0 107 0x0>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			status = "disabled";
@@ -595,7 +595,7 @@
 		blsp1_uart2: serial@f991e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991e000 0x1000>;
-			interrupts = <0 108 0x0>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			status = "disabled";
@@ -605,7 +605,8 @@
 			compatible = "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
 			reg-names = "hc_mem", "core_mem";
-			interrupts = <0 123 0>, <0 138 0>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&gcc GCC_SDCC1_AHB_CLK>,
@@ -618,8 +619,8 @@
 			compatible = "qcom,sdhci-msm-v4";
 			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
 			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
-				     <GIC_SPI 224 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC3_APPS_CLK>,
 				 <&gcc GCC_SDCC3_AHB_CLK>,
@@ -632,7 +633,8 @@
 			compatible = "qcom,sdhci-msm-v4";
 			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
 			reg-names = "hc_mem", "core_mem";
-			interrupts = <0 125 0>, <0 221 0>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&gcc GCC_SDCC2_AHB_CLK>,
@@ -699,25 +701,36 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			interrupts = <0 208 0>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		i2c@f9924000 {
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9924000 0x1000>;
-			interrupts = <0 96 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
+		blsp_i2c3: i2c@f9925000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9925000 0x1000>;
+			interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		blsp_i2c8: i2c@f9964000 {
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9964000 0x1000>;
-			interrupts = <0 102 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
 			#address-cells = <1>;
@@ -728,7 +741,7 @@
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9967000 0x1000>;
-			interrupts = <0 105 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
 			#address-cells = <1>;
@@ -737,6 +750,17 @@
 			dma-names = "tx", "rx";
 		};
 
+		blsp_i2c12: i2c@f9968000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9968000 0x1000>;
+			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		spmi_bus: spmi@fc4cf000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg-names = "core", "intr", "cnfg";
@@ -744,7 +768,7 @@
 			      <0xfc4cb000 0x1000>,
 			      <0xfc4ca000 0x1000>;
 			interrupt-names = "periph_irq";
-			interrupts = <0 190 0>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
 			#address-cells = <2>;
@@ -770,10 +794,11 @@
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			port {
-				etr_in: endpoint {
-					slave-mode;
-					remote-endpoint = <&replicator_out0>;
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out0>;
+					};
 				};
 			};
 		};
@@ -785,10 +810,11 @@
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			port {
-				tpiu_in: endpoint {
-					 slave-mode;
-					 remote-endpoint = <&replicator_out1>;
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint = <&replicator_out1>;
+					};
 				 };
 			};
 		};
@@ -800,7 +826,7 @@
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			ports {
+			out-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -816,10 +842,11 @@
 						remote-endpoint = <&tpiu_in>;
 					};
 				};
-				port@2 {
-					reg = <0>;
+			};
+
+			in-ports {
+				port {
 					replicator_in: endpoint {
-						slave-mode;
 						remote-endpoint = <&etf_out>;
 					};
 				};
@@ -833,20 +860,17 @@
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+			out-ports {
+				port {
 					etf_out: endpoint {
 						remote-endpoint = <&replicator_in>;
 					};
 				};
-				port@1 {
-					reg = <0>;
+			};
+
+			in-ports {
+				port {
 					etf_in: endpoint {
-						slave-mode;
 						remote-endpoint = <&merger_out>;
 					};
 				};
@@ -860,7 +884,7 @@
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			ports {
+			in-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -873,12 +897,13 @@
 				port@1 {
 					reg = <1>;
 					merger_in1: endpoint {
-						slave-mode;
 						remote-endpoint = <&funnel1_out>;
 					};
 				};
-				port@8 {
-					reg = <0>;
+			};
+
+			out-ports {
+				port {
 					merger_out: endpoint {
 						remote-endpoint = <&etf_in>;
 					};
@@ -893,7 +918,7 @@
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			ports {
+			in-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -910,12 +935,13 @@
 				port@5 {
 					reg = <5>;
 					funnel1_in5: endpoint {
-						slave-mode;
 						remote-endpoint = <&kpss_out>;
 					};
 				};
-				port@8 {
-					reg = <0>;
+			};
+
+			out-ports {
+				port {
 					funnel1_out: endpoint {
 						remote-endpoint = <&merger_in1>;
 					};
@@ -930,40 +956,38 @@
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			ports {
+			in-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
 				port@0 {
 					reg = <0>;
 					kpss_in0: endpoint {
-						slave-mode;
 						remote-endpoint = <&etm0_out>;
 					};
 				};
 				port@1 {
 					reg = <1>;
 					kpss_in1: endpoint {
-						slave-mode;
 						remote-endpoint = <&etm1_out>;
 					};
 				};
 				port@2 {
 					reg = <2>;
 					kpss_in2: endpoint {
-						slave-mode;
 						remote-endpoint = <&etm2_out>;
 					};
 				};
 				port@3 {
 					reg = <3>;
 					kpss_in3: endpoint {
-						slave-mode;
 						remote-endpoint = <&etm3_out>;
 					};
 				};
-				port@8 {
-					reg = <0>;
+			};
+
+			out-ports {
+				port {
 					kpss_out: endpoint {
 						remote-endpoint = <&funnel1_in5>;
 					};
@@ -980,9 +1004,11 @@
 
 			cpu = <&CPU0>;
 
-			port {
-				etm0_out: endpoint {
-					remote-endpoint = <&kpss_in0>;
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&kpss_in0>;
+					};
 				};
 			};
 		};
@@ -996,9 +1022,11 @@
 
 			cpu = <&CPU1>;
 
-			port {
-				etm1_out: endpoint {
-					remote-endpoint = <&kpss_in1>;
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&kpss_in1>;
+					};
 				};
 			};
 		};
@@ -1012,9 +1040,11 @@
 
 			cpu = <&CPU2>;
 
-			port {
-				etm2_out: endpoint {
-					remote-endpoint = <&kpss_in2>;
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&kpss_in2>;
+					};
 				};
 			};
 		};
@@ -1028,9 +1058,11 @@
 
 			cpu = <&CPU3>;
 
-			port {
-				etm3_out: endpoint {
-					remote-endpoint = <&kpss_in3>;
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&kpss_in3>;
+					};
 				};
 			};
 		};
@@ -1040,21 +1072,21 @@
 		compatible = "qcom,smd";
 
 		adsp {
-			interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
 
 			qcom,ipc = <&apcs 8 8>;
 			qcom,smd-edge = <1>;
 		};
 
 		modem {
-			interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
 
 			qcom,ipc = <&apcs 8 12>;
 			qcom,smd-edge = <0>;
 		};
 
 		rpm {
-			interrupts = <0 168 1>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
 			qcom,ipc = <&apcs 8 0>;
 			qcom,smd-edge = <15>;
 
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
index 327545119ee3..0d006aea99da 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
@@ -14,3 +14,7 @@
 	model = "iW-RainboW-G20D-Q7 RZ/G1M based plus camera daughter board";
 	compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
 };
+
+&pciec {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
index b683db4da8b1..498e223a5f93 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
+++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
@@ -13,3 +13,7 @@
 	model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M";
 	compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
 };
+
+&pciec {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index e3585daafdd6..22da819f186b 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -35,6 +35,8 @@
 
 	phy3: ethernet-phy@3 {
 		reg = <3>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
 	};
 };
@@ -43,6 +45,16 @@
 	clock-frequency = <20000000>;
 };
 
+&pfc {
+	scif1_pins: scif1 {
+		groups = "scif1_data_b";
+		function = "scif1";
+	};
+};
+
 &scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 87d32d3e23de..9ec78d3d0ca8 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/r8a77470-cpg-mssr.h>
+#include <dt-bindings/power/r8a77470-sysc.h>
 / {
 	compatible = "renesas,r8a77470";
 	#address-cells = <2>;
@@ -16,6 +17,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -23,16 +25,25 @@
 			reg = <0>;
 			clock-frequency = <1000000000>;
 			clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
-			power-domains = <&sysc 5>;
+			power-domains = <&sysc R8A77470_PD_CA7_CPU0>;
 			next-level-cache = <&L2_CA7>;
 		};
 
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
+			power-domains = <&sysc R8A77470_PD_CA7_CPU1>;
+			next-level-cache = <&L2_CA7>;
+		};
 
 		L2_CA7: cache-controller-0 {
 			compatible = "cache";
 			cache-unified;
 			cache-level = <2>;
-			power-domains = <&sysc 21>;
+			power-domains = <&sysc R8A77470_PD_CA7_SCU>;
 		};
 	};
 
@@ -60,6 +71,102 @@
 		#size-cells = <2>;
 		ranges;
 
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77470",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 23>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77470",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 23>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77470",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77470",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 30>;
+			gpio-reserved-ranges = <17 10>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77470",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77470",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a77470";
+			reg = <0 0xe6060000 0 0x118>;
+		};
+
 		cpg: clock-controller@e6150000 {
 			compatible = "renesas,r8a77470-cpg-mssr";
 			reg = <0 0xe6150000 0 0x1000>;
@@ -70,6 +177,12 @@
 			#reset-cells = <1>;
 		};
 
+		apmu@e6151000 {
+			compatible = "renesas,r8a77470-apmu", "renesas,apmu";
+			reg = <0 0xe6151000 0 0x188>;
+			cpus = <&cpu0 &cpu1>;
+		};
+
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a77470-rst";
 			reg = <0 0xe6160000 0 0x100>;
@@ -97,7 +210,7 @@
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
 		};
 
@@ -124,6 +237,20 @@
 			reg = <0 0xe6300000 0 0x20000>;
 		};
 
+		i2c4: i2c@e6520000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77470",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a77470",
 				     "renesas,rcar-dmac";
@@ -151,7 +278,7 @@
 					  "ch12", "ch13", "ch14";
 			clocks = <&cpg CPG_MOD 219>;
 			clock-names = "fck";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
 			resets = <&cpg 219>;
 			#dma-cells = <1>;
 			dma-channels = <15>;
@@ -184,7 +311,7 @@
 					  "ch12", "ch13", "ch14";
 			clocks = <&cpg CPG_MOD 218>;
 			clock-names = "fck";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
 			resets = <&cpg 218>;
 			#dma-cells = <1>;
 			dma-channels = <15>;
@@ -196,7 +323,7 @@
 			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
 			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 812>;
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -214,7 +341,7 @@
 			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
 			       <&dmac1 0x29>, <&dmac1 0x2a>;
 			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
 			resets = <&cpg 721>;
 			status = "disabled";
 		};
@@ -230,7 +357,7 @@
 			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
 			       <&dmac1 0x2d>, <&dmac1 0x2e>;
 			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
 			resets = <&cpg 720>;
 			status = "disabled";
 		};
@@ -246,7 +373,7 @@
 			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
 			       <&dmac1 0x2b>, <&dmac1 0x2c>;
 			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
 			resets = <&cpg 719>;
 			status = "disabled";
 		};
@@ -262,7 +389,7 @@
 			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
 			       <&dmac1 0x2f>, <&dmac1 0x30>;
 			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
 			resets = <&cpg 718>;
 			status = "disabled";
 		};
@@ -278,7 +405,7 @@
 			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
 			       <&dmac1 0xfb>, <&dmac1 0xfc>;
 			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
 			resets = <&cpg 715>;
 			status = "disabled";
 		};
@@ -294,11 +421,26 @@
 			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
 			       <&dmac1 0xfd>, <&dmac1 0xfe>;
 			dma-names = "tx", "rx", "tx", "rx";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
 			resets = <&cpg 714>;
 			status = "disabled";
 		};
 
+		sdhi2: sd@ee160000 {
+			compatible = "renesas,sdhi-r8a77470",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee160000 0 0x328>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+			       <&dmac1 0xd3>, <&dmac1 0xd4>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@f1001000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -309,7 +451,7 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&cpg CPG_MOD 408>;
 			clock-names = "clk";
-			power-domains = <&sysc 32>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
 			resets = <&cpg 408>;
 		};
 
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index de808d2ea856..cecb22924ec4 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Reference Device Tree Source for the Bock-W board
+ * Reference Device Tree Source for the R-Car M1A (R8A77781) Bock-W board
  *
  * Copyright (C) 2013  Renesas Solutions Corp.
  * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 1bce16cc6b20..05db0ccad7a6 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for Renesas r8a7778
+ * Device Tree Source for the R-Car M1A (R8A77781) SoC
  *
  * Copyright (C) 2013  Renesas Solutions Corp.
  * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index a4d0038363f0..abc14e7a4c93 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the Marzen board
+ * Device Tree Source for the R-Car H1 (R8A77790) Marzen board
  *
  * Copyright (C) 2013 Renesas Solutions Corp.
  * Copyright (C) 2013 Simon Horman
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 6b997bc016ee..3bc133d9489c 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for Renesas r8a7779
+ * Device Tree Source for the R-Car H1 (R8A77790) SoC
  *
  * Copyright (C) 2013 Renesas Solutions Corp.
  * Copyright (C) 2013 Simon Horman
@@ -344,7 +344,7 @@
 
 	sata: sata@fc600000 {
 		compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
-		reg = <0xfc600000 0x2000>;
+		reg = <0xfc600000 0x200000>;
 		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7779_CLK_SATA>;
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
index a13a92c26645..629da4cee1b9 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -318,6 +318,10 @@
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 
+		onkey {
+			compatible = "dlg,da9063-onkey";
+		};
+
 		rtc {
 			compatible = "dlg,da9063-rtc";
 		};
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 0925bdca438f..5a2747758f67 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the r8a7790 SoC
+ * Device Tree Source for the R-Car H2 (R8A77900) SoC
  *
  * Copyright (C) 2015 Renesas Electronics Corporation
  * Copyright (C) 2013-2014 Renesas Solutions Corp.
@@ -1559,7 +1559,7 @@
 		sata0: sata@ee300000 {
 			compatible = "renesas,sata-r8a7790",
 				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee300000 0 0x2000>;
+			reg = <0 0xee300000 0 0x200000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 815>;
 			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
@@ -1570,7 +1570,7 @@
 		sata1: sata@ee500000 {
 			compatible = "renesas,sata-r8a7790",
 				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee500000 0 0x2000>;
+			reg = <0 0xee500000 0 0x200000>;
 			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 814>;
 			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 991ac6feedd5..6f875502453c 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the r8a7791 SoC
+ * Device Tree Source for the R-Car M2-W (R8A77910) SoC
  *
  * Copyright (C) 2013-2015 Renesas Electronics Corporation
  * Copyright (C) 2013-2014 Renesas Solutions Corp.
@@ -1543,7 +1543,7 @@
 		sata0: sata@ee300000 {
 			compatible = "renesas,sata-r8a7791",
 				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee300000 0 0x2000>;
+			reg = <0 0xee300000 0 0x200000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 815>;
 			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
@@ -1554,7 +1554,7 @@
 		sata1: sata@ee500000 {
 			compatible = "renesas,sata-r8a7791",
 				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee500000 0 0x2000>;
+			reg = <0 0xee500000 0 0x200000>;
 			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 814>;
 			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 63a978ec81cc..8e9eb4b704d3 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the r8a7792 SoC
+ * Device Tree Source for the R-Car V2H (R8A77920) SoC
  *
  * Copyright (C) 2016 Cogent Embedded Inc.
  */
@@ -829,7 +829,6 @@
 		du: display@feb00000 {
 			compatible = "renesas,du-r8a7792";
 			reg = <0 0xfeb00000 0 0x40000>;
-			reg-names = "du";
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 724>,
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 6b2f3a4fd13d..f51601af89a2 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -596,6 +596,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+};
+
 &rwdt {
 	timeout-sec = <60>;
 	status = "okay";
@@ -725,6 +729,18 @@
 			compatible = "dlg,da9063-watchdog";
 		};
 	};
+
+	vdd_dvfs: regulator@68 {
+		compatible = "dlg,da9210";
+		reg = <0x68>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &i2c4 {
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 620a570307ff..bf05110fac4e 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the r8a7793 SoC
+ * Device Tree Source for the R-Car M2-N (R8A77930) SoC
  *
  * Copyright (C) 2014-2015 Renesas Electronics Corporation
  */
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index daec965889d3..60e91ebfa65d 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -405,6 +405,31 @@
 	clock-frequency = <400000>;
 };
 
+&i2c7 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+		};
+
+		rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+	};
+};
+
 &mmcif0 {
 	pinctrl-0 = <&mmcif0_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index ea2ca4bdaf1c..8d797d34816e 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the r8a7794 SoC
+ * Device Tree Source for the R-Car E2 (R8A77940) SoC
  *
  * Copyright (C) 2014 Renesas Electronics Corporation
  * Copyright (C) 2014 Ulrich Hecht
@@ -1349,7 +1349,6 @@
 		du: display@feb00000 {
 			compatible = "renesas,du-r8a7794";
 			reg = <0 0xfeb00000 0 0x40000>;
-			reg-names = "du";
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index afe29c95a006..eaf94976ed6d 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a06g032-sysctrl.h>
 
 / {
 	compatible = "renesas,r9a06g032";
@@ -21,14 +22,14 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0>;
-			clocks = <&sysctrl 84>;
+			clocks = <&sysctrl R9A06G032_CLK_A7MP>;
 		};
 
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <1>;
-			clocks = <&sysctrl 84>;
+			clocks = <&sysctrl R9A06G032_CLK_A7MP>;
 			enable-method = "renesas,r9a06g032-smp";
 			cpu-release-addr = <0 0x4000c204>;
 		};
@@ -77,13 +78,90 @@
 		};
 
 		uart0: serial@40060000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
 			reg = <0x40060000 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&sysctrl 146>;
-			clock-names = "baudclk";
+			clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>;
+			clock-names = "baudclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: serial@40061000 {
+			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
+			reg = <0x40061000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&sysctrl R9A06G032_CLK_UART1>, <&sysctrl R9A06G032_HCLK_UART1>;
+			clock-names = "baudclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@40062000 {
+			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
+			reg = <0x40062000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&sysctrl R9A06G032_CLK_UART2>, <&sysctrl R9A06G032_HCLK_UART2>;
+			clock-names = "baudclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart3: serial@50000000 {
+			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+			reg = <0x50000000 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
+			clock-names = "baudclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart4: serial@50001000 {
+			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+			reg = <0x50001000 0x400>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
+			clock-names = "baudclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart5: serial@50002000 {
+			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+			reg = <0x50002000 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
+			clock-names = "baudclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart6: serial@50003000 {
+			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+			reg = <0x50003000 0x400>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
+			clock-names = "baudclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart7: serial@50004000 {
+			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+			reg = <0x50004000 0x400>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
+			clock-names = "baudclk", "apb_pclk";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 67f57200d9a0..d560fc4051c5 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -733,7 +733,7 @@
 			/* no rts / cts for uart2 */
 		};
 
-		spi {
+		spi-pins {
 			spi_txd:spi-txd {
 				rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
 			};
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 45fd2b302dda..4a2890618f6f 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -93,6 +93,8 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
 		startup-delay-us = <100000>;
 		vin-supply = <&vcc_io>;
 	};
@@ -315,6 +317,12 @@
 		};
 	};
 
+	sd0 {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	usb {
 		host_vbus_drv: host-vbus-drv {
 			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index aa123f93f181..b6f790973736 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -56,6 +56,11 @@
 		};
 	};
 
+	display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop0_out>, <&vop1_out>;
+	};
+
 	sram: sram@10080000 {
 		compatible = "mmio-sram";
 		reg = <0x10080000 0x8000>;
@@ -69,6 +74,38 @@
 		};
 	};
 
+	vop0: vop@1010c000 {
+		compatible = "rockchip,rk3188-vop";
+		reg = <0x1010c000 0x1000>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC0>, <&cru DCLK_LCDC0>, <&cru HCLK_LCDC0>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vop0_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	vop1: vop@1010e000 {
+		compatible = "rockchip,rk3188-vop";
+		reg = <0x1010e000 0x1000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC1>, <&cru DCLK_LCDC1>, <&cru HCLK_LCDC1>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vop1_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	timer3: timer@2000e000 {
 		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
 		reg = <0x2000e000 0x20>;
@@ -309,6 +346,51 @@
 			};
 		};
 
+		lcdc1 {
+			lcdc1_dclk: lcdc1-dclk {
+				rockchip,pins = <2 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			lcdc1_den: lcdc1-den {
+				rockchip,pins = <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			lcdc1_hsync: lcdc1-hsync {
+				rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			lcdc1_vsync: lcdc1-vsync {
+				rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			lcdc1_rgb24: ldcd1-rgb24 {
+				rockchip,pins = <2 RK_PA0 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PA1 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PA2 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PA3 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PA4 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PA5 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PA6 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PA7 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB0 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB1 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB2 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB3 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB4 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB5 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB7 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC0 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC2 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC3 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC4 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC5 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC6 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
 		pwm0 {
 			pwm0_out: pwm0-out {
 				rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-tinker-s.dts b/arch/arm/boot/dts/rk3288-tinker-s.dts
new file mode 100644
index 000000000000..37093922b482
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-tinker-s.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rk3288-tinker.dtsi"
+
+/ {
+	model = "Rockchip RK3288 Asus Tinker Board S";
+	compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	max-frequency = <150000000>;
+	mmc-hs200-1_8v;
+	mmc-ddr-1_8v;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
index ceade5962899..1e43527aa196 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dts
+++ b/arch/arm/boot/dts/rk3288-tinker.dts
@@ -5,503 +5,9 @@
 
 /dts-v1/;
 
-#include "rk3288.dtsi"
-#include <dt-bindings/input/input.h>
+#include "rk3288-tinker.dtsi"
 
 / {
-	model = "Rockchip RK3288 Tinker Board";
+	model = "Rockchip RK3288 Asus Tinker Board";
 	compatible = "asus,rk3288-tinker", "rockchip,rk3288";
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	memory {
-		reg = <0x0 0x0 0x0 0x80000000>;
-		device_type = "memory";
-	};
-
-	ext_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-		clock-output-names = "ext_gmac";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwrbtn>;
-
-		button@0 {
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			label = "GPIO Key Power";
-			linux,input-type = <1>;
-			wakeup-source;
-			debounce-interval = <100>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		act-led {
-			gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger="mmc0";
-		};
-
-		heartbeat-led {
-			gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger="heartbeat";
-		};
-
-		pwr-led {
-			gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,name = "rockchip,tinker-codec";
-		simple-audio-card,mclk-fs = <512>;
-
-		simple-audio-card,codec {
-			sound-dai = <&hdmi>;
-		};
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s>;
-		};
-	};
-
-	vcc_sys: vsys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_sys";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_sd: sdmmc-regulator {
-		compatible = "regulator-fixed";
-		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc_pwr>;
-		regulator-name = "vcc_sd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <100000>;
-		vin-supply = <&vcc_io>;
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_cpu>;
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_MAC>;
-	assigned-clock-parents = <&ext_gmac>;
-	clock_in_out = "input";
-	phy-mode = "rgmii";
-	phy-supply = <&vcc33_lan>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio4 7 0>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 1000000>;
-	tx_delay = <0x30>;
-	rx_delay = <0x10>;
-	status = "ok";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c5>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-		dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
-				<&gpio0 12 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc_sys>;
-		vcc2-supply = <&vcc_sys>;
-		vcc3-supply = <&vcc_sys>;
-		vcc4-supply = <&vcc_sys>;
-		vcc6-supply = <&vcc_sys>;
-		vcc7-supply = <&vcc_sys>;
-		vcc8-supply = <&vcc_io>;
-		vcc9-supply = <&vcc_io>;
-		vcc10-supply = <&vcc_io>;
-		vcc11-supply = <&vcc_sys>;
-		vcc12-supply = <&vcc_io>;
-		vddio-supply = <&vcc_io>;
-
-		regulators {
-			vdd_cpu: DCDC_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-name = "vdd_arm";
-				regulator-ramp-delay = <6000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_gpu: DCDC_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-name = "vdd_gpu";
-				regulator-ramp-delay = <6000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_ddr";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_io: DCDC_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_io";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc18_ldo1: LDO_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc18_ldo1";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc33_mipi: LDO_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc33_mipi";
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_10: LDO_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd_10";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
-				};
-			};
-
-			vcc18_codec: LDO_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc18_codec";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vccio_sd: LDO_REG5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vccio_sd";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vdd10_lcd: LDO_REG6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd10_lcd";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
-				};
-			};
-
-			vcc_18: LDO_REG7 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_18";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc18_lcd: LDO_REG8 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc18_lcd";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc33_sd: SWITCH_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc33_sd";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc33_lan: SWITCH_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc33_lan";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2s {
-	#sound-dai-cells = <0>;
-	status = "okay";
-};
-
-&io_domains {
-	status = "okay";
-
-	sdcard-supply = <&vccio_sd>;
-};
-
-&pinctrl {
-	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
-		drive-strength = <8>;
-	};
-
-	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
-		bias-pull-up;
-		drive-strength = <8>;
-	};
-
-	backlight {
-		bl_en: bl-en {
-			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	buttons {
-		pwrbtn: pwrbtn {
-			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	eth_phy {
-		eth_phy_pwr: eth-phy-pwr {
-			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		pmic_int: pmic-int {
-			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
-					&pcfg_pull_up>;
-		};
-
-		dvs_1: dvs-1 {
-			rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
-					&pcfg_pull_down>;
-		};
-
-		dvs_2: dvs-2 {
-			rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
-					&pcfg_pull_down>;
-		};
-	};
-
-	sdmmc {
-		sdmmc_bus4: sdmmc-bus4 {
-			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
-					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
-					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
-					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
-		};
-
-		sdmmc_clk: sdmmc-clk {
-			rockchip,pins = <6 20 RK_FUNC_1 \
-					&pcfg_pull_none_drv_8ma>;
-		};
-
-		sdmmc_cmd: sdmmc-cmd {
-			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
-		};
-
-		sdmmc_pwr: sdmmc-pwr {
-			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb {
-		host_vbus_drv: host-vbus-drv {
-			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		pwr_3g: pwr-3g {
-			rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcc18_ldo1>;
-	status ="okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	disable-wp;			/* wp not hooked up */
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
-	status = "okay";
-	vmmc-supply = <&vcc33_sd>;
-	vqmmc-supply = <&vccio_sd>;
-};
-
-&tsadc {
-	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
-	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host1 {
-	status = "okay";
-};
-
-&usb_otg {
-	status= "okay";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
new file mode 100644
index 000000000000..aa107ee41b8b
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -0,0 +1,502 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include "rk3288.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		reg = <0x0 0x0 0x0 0x80000000>;
+		device_type = "memory";
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		button@0 {
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		act-led {
+			gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger="mmc0";
+		};
+
+		heartbeat-led {
+			gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger="heartbeat";
+		};
+
+		pwr-led {
+			gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "rockchip,tinker-codec";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s>;
+		};
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	phy-supply = <&vcc33_lan>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
+				<&gpio0 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vcc_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-ramp-delay = <6000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-ramp-delay = <6000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc18_ldo1: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_ldo1";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc33_mipi: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33_mipi";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc18_codec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_codec";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc33_sd: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc33_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc33_lan: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc33_lan";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2s {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	sdcard-supply = <&vccio_sd>;
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	backlight {
+		bl_en: bl-en {
+			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	eth_phy {
+		eth_phy_pwr: eth-phy-pwr {
+			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
+					&pcfg_pull_up>;
+		};
+
+		dvs_1: dvs-1 {
+			rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
+					&pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
+					&pcfg_pull_down>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 \
+					&pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pwr_3g: pwr-3g {
+			rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc18_ldo1>;
+	status ="okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;			/* wp not hooked up */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+	vmmc-supply = <&vcc33_sd>;
+	vqmmc-supply = <&vccio_sd>;
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status= "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 67358562a6ea..75f454a210d6 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -120,7 +120,7 @@
 			interrupts = <30>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
+				compatible = "samsung,s5pv210-wakeup-eint";
 				interrupts = <16>;
 				interrupt-parent = <&vic0>;
 			};
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 61f68e5c48e9..843052f14f1c 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -47,6 +47,7 @@
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
 
 / {
 	model = "Atmel SAMA5D2 family SoC";
@@ -58,6 +59,8 @@
 		serial1 = &uart3;
 		tcb0 = &tcb0;
 		tcb1 = &tcb1;
+		i2s0 = &i2s0;
+		i2s1 = &i2s1;
 	};
 
 	cpus {
@@ -84,10 +87,11 @@
 		clocks = <&mck>;
 		clock-names = "apb_pclk";
 
-		port {
-			etb_in: endpoint {
-				slave-mode;
-				remote-endpoint = <&etm_out>;
+		in-ports {
+			port {
+				etb_in: endpoint {
+					remote-endpoint = <&etm_out>;
+				};
 			};
 		};
 	};
@@ -99,9 +103,11 @@
 		clocks = <&mck>;
 		clock-names = "apb_pclk";
 
-		port {
-			etm_out: endpoint {
-				remote-endpoint = <&etb_in>;
+		out-ports {
+			port {
+				etm_out: endpoint {
+					remote-endpoint = <&etb_in>;
+				};
 			};
 		};
 	};
@@ -323,44 +329,6 @@
 			};
 		};
 
-		nand0: nand@80000000 {
-			compatible = "atmel,sama5d2-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			reg = < /* EBI CS3 */
-				0x80000000 0x08000000
-				/* SMC PMECC regs */
-				0xf8014070 0x00000490
-				/* SMC PMECC Error Location regs */
-				0xf8014500 0x00000200
-				/* ROM Galois tables */
-				0x00040000 0x00018000
-				>;
-			interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
-			atmel,nand-addr-offset = <21>;
-			atmel,nand-cmd-offset = <22>;
-			atmel,nand-has-dma;
-			atmel,has-pmecc;
-			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
-			status = "disabled";
-
-			nfc@c0000000 {
-				compatible = "atmel,sama5d3-nfc";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = < /* NFC Command Registers */
-					0xc0000000 0x08000000
-					/* NFC HSMC regs */
-					0xf8014000 0x00000070
-					/* NFC SRAM banks */
-					0x00100000 0x00100000
-					>;
-				clocks = <&hsmc_clk>;
-				atmel,write-by-sram;
-			};
-		};
-
 		sdmmc0: sdio-host@a0000000 {
 			compatible = "atmel,sama5d2-sdhci";
 			reg = <0xa0000000 0x300>;
@@ -992,6 +960,24 @@
 						atmel,clk-output-range = <0 100000000>;
 					};
 				};
+
+				i2s_clkmux {
+					compatible = "atmel,sama5d2-clk-i2s-mux";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					i2s0muxck: i2s0_muxclk {
+						clocks = <&i2s0_clk>, <&i2s0_gclk>;
+						#clock-cells = <0>;
+						reg = <0>;
+					};
+
+					i2s1muxck: i2s1_muxclk {
+						clocks = <&i2s1_clk>, <&i2s1_gclk>;
+						#clock-cells = <0>;
+						reg = <1>;
+					};
+				};
 			};
 
 			qspi0: spi@f0020000 {
@@ -1295,6 +1281,24 @@
 				clocks = <&clk32k>;
 			};
 
+			i2s0: i2s@f8050000 {
+				compatible = "atmel,sama5d2-i2s";
+				reg = <0xf8050000 0x100>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(31))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(32))>;
+				dma-names = "tx", "rx";
+				clocks = <&i2s0_clk>, <&i2s0_gclk>;
+				clock-names = "pclk", "gclk";
+				assigned-clocks = <&i2s0muxck>;
+				assigned-clock-parents = <&i2s0_gclk>;
+				status = "disabled";
+			};
+
 			can0: can@f8054000 {
 				compatible = "bosch,m_can";
 				reg = <0xf8054000 0x4000>, <0x210000 0x4000>;
@@ -1437,6 +1441,17 @@
 				atmel,max-sample-rate-hz = <20000000>;
 				atmel,startup-time-ms = <4>;
 				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			resistive_touch: resistive-touch {
+				compatible = "resistive-adc-touch";
+				io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+					      <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+					      <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+				io-channel-names = "x", "y", "pressure";
+				touchscreen-min-pressure = <50000>;
 				status = "disabled";
 			};
 
@@ -1488,6 +1503,24 @@
 				status = "disabled";
 			};
 
+			i2s1: i2s@fc04c000 {
+				compatible = "atmel,sama5d2-i2s";
+				reg = <0xfc04c000 0x100>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(33))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(34))>;
+				dma-names = "tx", "rx";
+				clocks = <&i2s1_clk>, <&i2s1_gclk>;
+				clock-names = "pclk", "gclk";
+				assigned-clocks = <&i2s1muxck>;
+				assigned-parrents = <&i2s1_gclk>;
+				status = "disabled";
+			};
+
 			can1: can@fc050000 {
 				compatible = "bosch,m_can";
 				reg = <0xfc050000 0x4000>, <0x210000 0x4000>;
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 92a35a1942b6..7371f2a0460f 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -1323,13 +1323,13 @@
 				};
 			};
 
-			rstc@fc068600 {
+			reset_controller: rstc@fc068600 {
 				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
 				reg = <0xfc068600 0x10>;
 				clocks = <&clk32k>;
 			};
 
-			shdwc@fc068610 {
+			shutdown_controller: shdwc@fc068610 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfc068610 0x10>;
 				clocks = <&clk32k>;
@@ -1342,7 +1342,7 @@
 				clocks = <&h32ck>;
 			};
 
-			watchdog@fc068640 {
+			watchdog: watchdog@fc068640 {
 				compatible = "atmel,sama5d4-wdt";
 				reg = <0xfc068640 0x10>;
 				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -1376,7 +1376,7 @@
 			};
 
 
-			pinctrl@fc06a000 {
+			pinctrl: pinctrl@fc06a000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index b38f8c240558..2d300396f0ed 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -22,8 +22,6 @@
 	#size-cells = <1>;
 
 	aliases {
-		ethernet0 = &gmac0;
-		ethernet1 = &gmac1;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		timer0 = &timer0;
@@ -483,10 +481,17 @@
 						clk-gate = <0xa0 9>;
 					};
 
+					nand_ecc_clk: nand_ecc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&nand_x_clk>;
+						clk-gate = <0xa0 9>;
+					};
+
 					nand_clk: nand_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-gate-clk";
-						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clocks = <&nand_x_clk>;
 						clk-gate = <0xa0 10>;
 						fixed-divider = <4>;
 					};
@@ -754,7 +759,8 @@
 			reg-names = "nand_data", "denali_reg";
 			interrupts = <0x0 0x90 0x4>;
 			dma-mask = <0xffffffff>;
-			clocks = <&nand_x_clk>;
+			clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+			clock-names = "nand", "nand_x", "ecc";
 			status = "disabled";
 		};
 
@@ -841,6 +847,8 @@
 			reg = <0xffc08000 0x1000>;
 			clocks = <&l4_sp_clk>;
 			clock-names = "timer";
+			resets = <&rst SPTIMER0_RESET>;
+			reset-names = "timer";
 		};
 
 		timer1: timer1@ffc09000 {
@@ -849,6 +857,8 @@
 			reg = <0xffc09000 0x1000>;
 			clocks = <&l4_sp_clk>;
 			clock-names = "timer";
+			resets = <&rst SPTIMER1_RESET>;
+			reset-names = "timer";
 		};
 
 		timer2: timer2@ffd00000 {
@@ -857,6 +867,8 @@
 			reg = <0xffd00000 0x1000>;
 			clocks = <&osc1>;
 			clock-names = "timer";
+			resets = <&rst OSC1TIMER0_RESET>;
+			reset-names = "timer";
 		};
 
 		timer3: timer3@ffd01000 {
@@ -865,6 +877,8 @@
 			reg = <0xffd01000 0x1000>;
 			clocks = <&osc1>;
 			clock-names = "timer";
+			resets = <&rst OSC1TIMER1_RESET>;
+			reset-names = "timer";
 		};
 
 		uart0: serial0@ffc02000 {
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index a4dcb68f4322..59ef13e37536 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -377,13 +377,28 @@
 						clk-gate = <0xC8 11>;
 					};
 
-					nand_clk: nand_clk {
+					nand_x_clk: nand_x_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-a10-gate-clk";
 						clocks = <&l4_mp_clk>;
 						clk-gate = <0xC8 10>;
 					};
 
+					nand_ecc_clk: nand_ecc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&nand_x_clk>;
+						clk-gate = <0xC8 10>;
+					};
+
+					nand_clk: nand_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&nand_x_clk>;
+						fixed-divider = <4>;
+						clk-gate = <0xC8 10>;
+					};
+
 					spi_m_clk: spi_m_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-a10-gate-clk";
@@ -613,7 +628,7 @@
 			status = "disabled";
 		};
 
-		sdr: sdr@ffc25000 {
+		sdr: sdr@ffcfb100 {
 			compatible = "altr,sdr-ctl", "syscon";
 			reg = <0xffcfb100 0x80>;
 		};
@@ -650,7 +665,8 @@
 			reg-names = "nand_data", "denali_reg";
 			interrupts = <0 99 4>;
 			dma-mask = <0xffffffff>;
-			clocks = <&nand_clk>;
+			clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+			clock-names = "nand", "nand_x", "ecc";
 			status = "disabled";
 		};
 
@@ -760,7 +776,7 @@
 		timer@ffffc600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xffffc600 0x100>;
-			interrupts = <1 13 0xf04>;
+			interrupts = <1 13 0xf01>;
 			clocks = <&mpu_periph_clk>;
 		};
 
@@ -770,6 +786,8 @@
 			reg = <0xffc02700 0x100>;
 			clocks = <&l4_sp_clk>;
 			clock-names = "timer";
+			resets = <&rst SPTIMER0_RESET>;
+			reset-names = "timer";
 		};
 
 		timer1: timer1@ffc02800 {
@@ -778,6 +796,8 @@
 			reg = <0xffc02800 0x100>;
 			clocks = <&l4_sp_clk>;
 			clock-names = "timer";
+			resets = <&rst SPTIMER1_RESET>;
+			reset-names = "timer";
 		};
 
 		timer2: timer2@ffd00000 {
@@ -786,6 +806,8 @@
 			reg = <0xffd00000 0x100>;
 			clocks = <&l4_sys_free_clk>;
 			clock-names = "timer";
+			resets = <&rst L4SYSTIMER0_RESET>;
+			reset-names = "timer";
 		};
 
 		timer3: timer3@ffd00100 {
@@ -794,6 +816,8 @@
 			reg = <0xffd01000 0x100>;
 			clocks = <&l4_sys_free_clk>;
 			clock-names = "timer";
+			resets = <&rst L4SYSTIMER1_RESET>;
+			reset-names = "timer";
 		};
 
 		uart0: serial0@ffc02000 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
index b280e6494193..31b01a998b2e 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
@@ -88,7 +88,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 
-	adxl345: adxl345@0 {
+	adxl345: adxl345@53 {
 		compatible = "adi,adxl345";
 		reg = <0x53>;
 
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
index 53bf99eef66d..031c721441ff 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -21,8 +21,13 @@
 	model = "EBV SOCrates";
 	compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga";
 
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@0 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
index f50b19447de6..e61efe16e79c 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -54,7 +54,8 @@
 	compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@0 {
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 2310a4e97768..e6ed7c0354a2 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -15,9 +15,14 @@
 #include <dt-bindings/arm/ux500_pm_domains.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/ste-ab8500.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -67,9 +72,11 @@
 			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
 			clock-names = "apb_pclk", "atclk";
 			cpu = <&CPU0>;
-			port {
-				ptm0_out_port: endpoint {
-					remote-endpoint = <&funnel_in_port0>;
+			out-ports {
+				port {
+					ptm0_out_port: endpoint {
+						remote-endpoint = <&funnel_in_port0>;
+					};
 				};
 			};
 		};
@@ -81,9 +88,11 @@
 			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
 			clock-names = "apb_pclk", "atclk";
 			cpu = <&CPU1>;
-			port {
-				ptm1_out_port: endpoint {
-					remote-endpoint = <&funnel_in_port1>;
+			out-ports {
+				port {
+					ptm1_out_port: endpoint {
+						remote-endpoint = <&funnel_in_port1>;
+					};
 				};
 			};
 		};
@@ -94,32 +103,29 @@
 
 			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
 			clock-names = "apb_pclk", "atclk";
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/* funnel output ports */
-				port@0 {
-					reg = <0>;
+			out-ports {
+				port {
 					funnel_out_port: endpoint {
 						remote-endpoint =
 							<&replicator_in_port0>;
 					};
 				};
+			};
 
-				/* funnel input ports */
-				port@1 {
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
 					reg = <0>;
 					funnel_in_port0: endpoint {
-						slave-mode;
 						remote-endpoint = <&ptm0_out_port>;
 					};
 				};
 
-				port@2 {
+				port@1 {
 					reg = <1>;
 					funnel_in_port1: endpoint {
-						slave-mode;
 						remote-endpoint = <&ptm1_out_port>;
 					};
 				};
@@ -131,11 +137,10 @@
 			clocks = <&prcmu_clk PRCMU_APEATCLK>;
 			clock-names = "atclk";
 
-			ports {
+			out-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				/* replicator output ports */
 				port@0 {
 					reg = <0>;
 					replicator_out_port0: endpoint {
@@ -148,12 +153,11 @@
 						remote-endpoint = <&etb_in_port>;
 					};
 				};
+			};
 
-				/* replicator input port */
-				port@2 {
-					reg = <0>;
+			in-ports {
+				port {
 					replicator_in_port0: endpoint {
-						slave-mode;
 						remote-endpoint = <&funnel_out_port>;
 					};
 				};
@@ -166,10 +170,11 @@
 
 			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
 			clock-names = "apb_pclk", "atclk";
-			port {
-				tpiu_in_port: endpoint {
-					slave-mode;
-					remote-endpoint = <&replicator_out_port0>;
+			in-ports {
+				port {
+					tpiu_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port0>;
+					};
 				};
 			};
 		};
@@ -180,10 +185,11 @@
 
 			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
 			clock-names = "apb_pclk", "atclk";
-			port {
-				etb_in_port: endpoint {
-					slave-mode;
-					remote-endpoint = <&replicator_out_port1>;
+			in-ports {
+				port {
+					etb_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port1>;
+					};
 				};
 			};
 		};
@@ -197,7 +203,7 @@
 			      <0xa0410100 0x100>;
 		};
 
-		scu@a04100000 {
+		scu@a0410000 {
 			compatible = "arm,cortex-a9-scu";
 			reg = <0xa0410000 0x100>;
 		};
@@ -487,7 +493,7 @@
 		};
 
 		prcmu: prcmu@80157000 {
-			compatible = "stericsson,db8500-prcmu";
+			compatible = "stericsson,db8500-prcmu", "syscon";
 			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
 			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
 			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
@@ -878,7 +884,7 @@
 			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80002000 0x1000>;
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -892,7 +898,7 @@
 			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
-		ssp@80003000 {
+		spi@80003000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80003000 0x1000>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
index 5c5cea232743..1ec193b0c506 100644
--- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
@@ -607,16 +607,20 @@
 
 			mcde {
 				lcd_default_mode: lcd_default {
-					default_mux {
+					default_mux1 {
 						/* Mux in VSI0 and all the data lines */
 						function = "lcd";
 						groups =
 						"lcdvsi0_a_1", /* VSI0 for LCD */
 						"lcd_d0_d7_a_1", /* Data lines */
 						"lcd_d8_d11_a_1", /* TV-out */
-						"lcdaclk_b_1", /* Clock line for TV-out */
 						"lcdvsi1_a_1"; /* VSI1 for HDMI */
 					};
+					default_mux2 {
+						function = "lcda";
+						groups =
+						"lcdaclk_b_1"; /* Clock line for TV-out */
+					};
 					default_cfg1 {
 						pins =
 						"GPIO68_E1", /* VSI0 */
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 9e359e4f342e..feb682a3d363 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -15,6 +15,7 @@
 
 / {
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x20000000>;
 	};
 
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 3f14b4df69b4..94eeb7f1c947 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -57,7 +57,7 @@
 			};
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			/*
 			 * On the first generation boards, this SSP/SPI port was connected
 			 * to the AB8500.
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index b0b94d053098..2de3ce79e496 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -26,6 +26,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x20000000>;
 	};
 
@@ -376,7 +377,7 @@
 			pinctrl-1 = <&i2c3_sleep_mode>;
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&ssp0_snowball_mode>;
 		};
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 62ecb6a2fa39..1bd1aba3322f 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -442,7 +442,7 @@
 			dma-names = "rx";
 		};
 
-		spi: ssp@c0006000 {
+		spi: spi@c0006000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0xc0006000 0x1000>;
 			interrupt-parent = <&vica>;
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index 155caa8c002a..4ee6d51d8d1e 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -61,8 +61,11 @@
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "STI-B2260";
 		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		simple-audio-card,dai-link0 {
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
 			/* DAC */
 			format = "i2s";
 			mclk-fs = <128>;
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 4dedfcb0fcb3..97e05f55fb6e 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -27,8 +27,11 @@
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "STI-B2120";
 		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		simple-audio-card,dai-link0 {
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
 			/* HDMI */
 			format = "i2s";
 			mclk-fs = <128>;
@@ -41,7 +44,8 @@
 			};
 		};
 
-		simple-audio-card,dai-link1 {
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
 			/* DAC */
 			format = "i2s";
 			mclk-fs = <256>;
@@ -55,7 +59,8 @@
 			};
 		};
 
-		simple-audio-card,dai-link2 {
+		simple-audio-card,dai-link@2 {
+			reg = <2>;
 			/* SPDIF */
 			format = "left_j";
 			mclk-fs = <128>;
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 7eb786a2d624..ed7d7f46465e 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -264,8 +264,7 @@
 &sdio {
 	status = "okay";
 	vmmc-supply = <&mmc_vcard>;
-	cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default", "opendrain";
 	pinctrl-0 = <&sdio_pins>;
 	pinctrl-1 = <&sdio_pins_od>;
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index e35d782e7e5f..8d6f028ae285 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -58,7 +58,7 @@
 			clock-frequency = <0>;
 		};
 
-		clk-lse {
+		clk_lse: clk-lse {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 3ee768cb86fc..7937b43d7788 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -210,8 +210,7 @@
 &sdio {
 	status = "okay";
 	vmmc-supply = <&mmc_vcard>;
-	cd-gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
 	broken-cd;
 	pinctrl-names = "default", "opendrain";
 	pinctrl-0 = <&sdio_pins>;
diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
index f9ad71f7c807..e3a7bd338d61 100644
--- a/arch/arm/boot/dts/stm32f746-disco.dts
+++ b/arch/arm/boot/dts/stm32f746-disco.dts
@@ -101,8 +101,7 @@
 &sdio1 {
 	status = "okay";
 	vmmc-supply = <&mmc_vcard>;
-	cd-gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default", "opendrain";
 	pinctrl-0 = <&sdio_pins_a>;
 	pinctrl-1 = <&sdio_pins_od_a>;
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index 677276ba4dbe..483d896e2bc1 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -126,8 +126,7 @@
 &sdio2 {
 	status = "okay";
 	vmmc-supply = <&mmc_vcard>;
-	cd-gpios = <&gpioi 15 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
 	broken-cd;
 	pinctrl-names = "default", "opendrain";
 	pinctrl-0 = <&sdio_pins_b>;
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 637beffe5067..cbdd69ca9e7a 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -472,7 +472,7 @@
 			interrupt-parent = <&exti>;
 			interrupts = <17 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "alarm";
-			st,syscfg = <&pwrcfg>;
+			st,syscfg = <&pwrcfg 0x00 0x100>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 372bc2ea6b92..063ee8ac5dcb 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "stm32mp157c-ed1.dts"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
@@ -19,6 +20,58 @@
 		serial0 = &uart4;
 		ethernet0 = &ethernet0;
 	};
+
+	panel_backlight: panel-backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;
+		default-on;
+		status = "okay";
+	};
+};
+
+&cec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cec_pins_a>;
+	status = "okay";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+
+	panel-dsi@0 {
+		compatible = "raydium,rm68200";
+		reg = <0>;
+		reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
+		backlight = <&panel_backlight>;
+		status = "okay";
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
 };
 
 &ethernet0 {
@@ -40,12 +93,6 @@
 	};
 };
 
-&cec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cec_pins_a>;
-	status = "okay";
-};
-
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
@@ -62,6 +109,20 @@
 	status = "okay";
 };
 
+&ltdc {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
 &m_can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&m_can1_pins_a>;
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 185541a5b69f..c50c36baba75 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -947,7 +947,7 @@
 			dma-requests = <48>;
 		};
 
-		qspi: qspi@58003000 {
+		qspi: spi@58003000 {
 			compatible = "st,stm32f469-qspi";
 			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
 			reg-names = "qspi", "qspi_mm";
diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
index 8acbaab14fe5..d2a2eb8b3f26 100644
--- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
@@ -92,7 +92,8 @@
 	 */
 	clock-frequency = <400000>;
 
-	touchscreen: touchscreen {
+	touchscreen: touchscreen@40 {
+		reg = <0x40>;
 		interrupt-parent = <&pio>;
 		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 8bfb36651177..9cd65c46720b 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -108,6 +108,21 @@
 		};
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		cma_pool: cma@4a000000 {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x4a000000 0x6000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
 	soc@1c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -294,6 +309,17 @@
 			};
 		};
 
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun5i-a13-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_VE>;
+			interrupts = <53>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
 		mmc0: mmc@1c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 9c52712af241..02e40da9f028 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -174,6 +174,21 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		cma_pool: cma@4a000000 {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x4a000000 0x6000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -479,6 +494,17 @@
 			};
 		};
 
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun7i-a20-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_VE>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
 		mmc0: mmc@1c0f000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 4e92741b24a7..c1cc8f09dd9a 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -190,6 +190,21 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		cma_pool: cma@4a000000 {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x4a000000 0x6000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
 	sound: sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "sun8i-a33-audio";
@@ -254,6 +269,17 @@
 			};
 		};
 
+		video-codec@01c0e000 {
+			compatible = "allwinner,sun8i-a33-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
 		crypto: crypto-engine@1c15000 {
 			compatible = "allwinner,sun4i-a10-crypto";
 			reg = <0x01c15000 0x1000>;
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index c7ce4158d6c8..742d2946b08b 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -191,6 +191,11 @@
 	status = "okay";
 };
 
+&r_cir {
+	clock-frequency = <3000000>;
+	status = "okay";
+};
+
 &r_rsb {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 00a02b037320..5617dd387fd3 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -990,6 +990,19 @@
 			reg = <0x1f01c00 0x400>;
 		};
 
+		r_cir: ir@1f02000 {
+			compatible = "allwinner,sun8i-a83t-ir",
+				"allwinner,sun5i-a13-ir";
+			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_APB0_IR>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x400>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_cir_pin>;
+			status = "disabled";
+		};
+
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun8i-a83t-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
@@ -1002,6 +1015,11 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
+			r_cir_pin: r-cir-pin {
+				pins = "PL12";
+				function = "s_cir_rx";
+			};
+
 			r_rsb_pins: r-rsb-pins {
 				pins = "PL0", "PL1";
 				function = "s_rsb";
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts
new file mode 100644
index 000000000000..fc4a8c3d084d
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-bananapi-m2-plus-v1.2.dtsi"
+
+/ {
+	model = "Banana Pi BPI-M2-Plus v1.2 H3";
+	compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun8i-h3";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
index 30540dc8e0c5..195a75da13f1 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -42,195 +42,9 @@
 
 /dts-v1/;
 #include "sun8i-h3.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "sunxi-bananapi-m2-plus.dtsi"
 
 / {
-	model = "Banana Pi BPI-M2-Plus";
+	model = "Banana Pi BPI-M2-Plus H3";
 	compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
-
-	aliases {
-		ethernet0 = &emac;
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	connector {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_in: endpoint {
-				remote-endpoint = <&hdmi_out_con>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-
-		pwr_led {
-			label = "bananapi-m2-plus:red:pwr";
-			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
-			default-state = "on";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-
-		sw4 {
-			label = "power";
-			linux,code = <BTN_0>;
-			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	reg_gmac_3v3: gmac-3v3 {
-		      compatible = "regulator-fixed";
-		      regulator-name = "gmac-3v3";
-		      regulator-min-microvolt = <3300000>;
-		      regulator-max-microvolt = <3300000>;
-		      startup-delay-us = <100000>;
-		      enable-active-high;
-		      gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-	};
-
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-	};
-};
-
-&de {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&ehci2 {
-	status = "okay";
-};
-
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-
-	status = "okay";
-};
-
-&external_mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&hdmi_out {
-	hdmi_out_con: endpoint {
-		remote-endpoint = <&hdmi_con_in>;
-	};
-};
-
-&ir {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
-	status = "okay";
-};
-
-&mmc0 {
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <4>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
-	status = "okay";
-};
-
-&mmc1 {
-	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc3v3>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&pio>;
-		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
-		interrupt-names = "host-wake";
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_8bit_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc3v3>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&ohci2 {
-	status = "okay";
-};
-
-&reg_usb0_vbus {
-	gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usbphy {
-	usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
-	usb0_vbus-supply = <&reg_usb0_vbus>;
-	/* USB host VBUS is on as long as VCC-IO is on */
-	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
new file mode 100644
index 000000000000..c834048c325e
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ * Copyright (C) 2018 Diego Rondini <diego.rondini@kynetics.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi Zero Plus2 H3";
+	compatible = "xunlong,orangepi-zero-plus2-h3", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>;	/* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index f0096074a467..3ecfabb10151 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -119,6 +119,20 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		cma_pool: cma@4a000000 {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x4a000000 0x6000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
 	soc {
 		system-control@1c00000 {
 			compatible = "allwinner,sun8i-h3-system-control";
@@ -142,6 +156,17 @@
 			};
 		};
 
+		video-codec@01c0e000 {
+			compatible = "allwinner,sun8i-h3-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
 		mali: gpu@1c40000 {
 			compatible = "allwinner,sun8i-h3-mali", "arm,mali-400";
 			reg = <0x01c40000 0x10000>;
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index c39b9169ea64..438b7b44dab3 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -105,6 +105,12 @@
 	};
 };
 
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo3>;
+	status = "okay";
+};
+
 &de {
 	status = "okay";
 };
@@ -159,8 +165,7 @@
 &mmc0 {
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
-	cd-inverted;
+	cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
 	status = "okay";
 };
 
@@ -251,6 +256,18 @@
 	regulator-name = "vcc-wifi";
 };
 
+&reg_dldo4 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd1v2-sata";
+};
+
 &tcon_tv0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 5f547c161baf..6f4c9ca5a3ee 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -529,6 +529,19 @@
 			#size-cells = <0>;
 		};
 
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun8i-r40-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+			resets = <&ccu RST_BUS_SATA>;
+			resets-name = "ahci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+		};
+
 		gmac: ethernet@1c50000 {
 			compatible = "allwinner,sun8i-r40-gmac";
 			syscon = <&ccu>;
diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
index 880096c7e252..5e8a95af89b8 100644
--- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
@@ -69,7 +69,8 @@
 	 */
 	clock-frequency = <400000>;
 
-	touchscreen: touchscreen@0 {
+	touchscreen: touchscreen@40 {
+		reg = <0x40>;
 		interrupt-parent = <&pio>;
 		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index 35859d8f3267..bf97f6244c23 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -95,7 +95,7 @@
 &i2c0 {
 	status = "okay";
 
-	axp22x: pmic@68 {
+	axp22x: pmic@34 {
 		compatible = "x-powers,axp221";
 		reg = <0x34>;
 		interrupt-parent = <&nmi_intc>;
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 25591d6883ef..d9532fb1ef65 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -1196,7 +1196,7 @@
 			};
 		};
 
-		r_rsb: i2c@8003400 {
+		r_rsb: rsb@8003400 {
 			compatible = "allwinner,sun8i-a23-rsb";
 			reg = <0x08003400 0x400>;
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
new file mode 100644
index 000000000000..53edd1faee99
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include "sunxi-bananapi-m2-plus.dtsi"
+
+/ {
+	/*
+	 * Bananapi M2+ v1.2 uses a GPIO line to change the effective
+	 * resistance on the CPU regulator's feedback pin.
+	 */
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+		gpios-states = <0x1>;
+		states = <1100000 0x0
+			  1300000 0x1>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
new file mode 100644
index 000000000000..b3283aeb5b7d
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
@@ -0,0 +1,231 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+
+		pwr_led {
+			label = "bananapi-m2-plus:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+
+		sw4 {
+			label = "power";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		      compatible = "regulator-fixed";
+		      regulator-name = "gmac-3v3";
+		      regulator-min-microvolt = <3300000>;
+		      regulator-max-microvolt = <3300000>;
+		      startup-delay-us = <100000>;
+		      enable-active-high;
+		      gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	/* USB host VBUS is on as long as VCC-IO is on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index fc6131315c47..4b1530ebe427 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -816,7 +816,7 @@
 			clock-names = "apb", "ir";
 			resets = <&r_ccu RST_APB0_IR>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x01f02000 0x40>;
+			reg = <0x01f02000 0x400>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index a6ad759dddb4..eaee10ef6512 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -72,6 +72,7 @@
 	host1x@50000000 {
 		hdmi@54280000 {
 			status = "okay";
+			hdmi-supply = <&reg_5v0>;
 		};
 	};
 
@@ -122,7 +123,7 @@
 	/*
 	 * GEN2_I2C: I2C2_SDA/SCL (DDC) on MXM3 pin 205/207 (e.g. display EDID)
 	 */
-	hdmi_ddc: i2c@7000c400 {
+	i2c@7000c400 {
 		status = "okay";
 	};
 
@@ -141,29 +142,19 @@
 	spi@7000d400 {
 		status = "okay";
 		spi-max-frequency = <50000000>;
-
-		spidev0: spidev@0 {
-			compatible = "spidev";
-			reg = <0>;
-			spi-max-frequency = <50000000>;
-		};
 	};
 
 	/* SPI4: Apalis SPI2 */
 	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <50000000>;
-
-		spidev1: spidev@0 {
-			compatible = "spidev";
-			reg = <0>;
-			spi-max-frequency = <50000000>;
-		};
 	};
 
 	/* Apalis Serial ATA */
 	sata@70020000 {
 		status = "okay";
+		target-5v-supply = <&reg_5v0>;
+		target-12v-supply = <&reg_12v0>;
 	};
 
 	hda@70030000 {
@@ -177,18 +168,18 @@
 	/* Apalis MMC1 */
 	sdhci@700b0000 {
 		status = "okay";
+		bus-width = <4>;
 		/* MMC1_CD# */
 		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
-		bus-width = <4>;
 		vqmmc-supply = <&vddio_sdmmc1>;
 	};
 
 	/* Apalis SD1 */
 	sdhci@700b0400 {
 		status = "okay";
+		bus-width = <4>;
 		/* SD1_CD# */
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-		bus-width = <4>;
 		vqmmc-supply = <&vddio_sdmmc3>;
 	};
 
@@ -225,11 +216,12 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>; /* BKL1_PWM */
 		brightness-levels = <255 231 223 207 191 159 127 0>;
 		default-brightness-level = <6>;
 		/* BKL1_ON */
 		enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 3 5000000>; /* BKL1_PWM */
 	};
 
 	gpio-keys {
@@ -244,6 +236,13 @@
 		};
 	};
 
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_5v0: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "5V_SW";
@@ -251,6 +250,13 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "12V_SW";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
 	/* USBO1_EN */
 	reg_usbo1_vbus: regulator-usbo1-vbus {
 		compatible = "regulator-fixed";
@@ -276,7 +282,7 @@
 
 &gpio {
 	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex_perst_n {
+	pex-perst-n {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
index 8a8d5fa0ecd1..7961eb4bd803 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
@@ -11,7 +11,8 @@
 / {
 	model = "Toradex Apalis TK1 on Apalis Evaluation Board";
 	compatible = "toradex,apalis-tk1-v1.2-eval", "toradex,apalis-tk1-eval",
-		     "toradex,apalis-tk1", "nvidia,tegra124";
+		     "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1",
+		     "nvidia,tegra124";
 
 	aliases {
 		rtc0 = "/i2c@7000c000/rtc@68";
@@ -36,6 +37,7 @@
 	host1x@50000000 {
 		hdmi@54280000 {
 			status = "okay";
+			hdmi-supply = <&reg_5v0>;
 		};
 	};
 
@@ -98,7 +100,7 @@
 	 * I2C4 (DDC): I2C4_SDA/SCL (DDC) on MXM3 pin 205/207
 	 * (e.g. display EDID)
 	 */
-	hdmi_ddc: i2c@7000c700 {
+	i2c@7000c700 {
 		status = "okay";
 	};
 
@@ -106,29 +108,19 @@
 	spi@7000d400 {
 		status = "okay";
 		spi-max-frequency = <50000000>;
-
-		spidev0: spidev@0 {
-			compatible = "spidev";
-			reg = <0>;
-			spi-max-frequency = <50000000>;
-		};
 	};
 
 	/* SPI4: Apalis SPI2 */
 	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <50000000>;
-
-		spidev1: spidev@0 {
-			compatible = "spidev";
-			reg = <0>;
-			spi-max-frequency = <50000000>;
-		};
 	};
 
 	/* Apalis Serial ATA */
 	sata@70020000 {
 		status = "okay";
+		target-5v-supply = <&reg_5v0>;
+		target-12v-supply = <&reg_12v0>;
 	};
 
 	hda@70030000 {
@@ -142,18 +134,18 @@
 	/* Apalis MMC1 */
 	sdhci@700b0000 {
 		status = "okay";
+		bus-width = <4>;
 		/* MMC1_CD# */
 		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
-		bus-width = <4>;
 		vqmmc-supply = <&vddio_sdmmc1>;
 	};
 
 	/* Apalis SD1 */
 	sdhci@700b0400 {
 		status = "okay";
+		bus-width = <4>;
 		/* SD1_CD# */
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-		bus-width = <4>;
 		vqmmc-supply = <&vddio_sdmmc3>;
 	};
 
@@ -190,11 +182,12 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>; /* BKL1_PWM */
 		brightness-levels = <255 231 223 207 191 159 127 0>;
 		default-brightness-level = <6>;
 		/* BKL1_ON */
 		enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 3 5000000>; /* BKL1_PWM */
 	};
 
 	gpio-keys {
@@ -209,6 +202,13 @@
 		};
 	};
 
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_5v0: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "5V_SW";
@@ -216,6 +216,13 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "12V_SW";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
 	/* USBO1_EN */
 	reg_usbo1_vbus: regulator-usbo1-vbus {
 		compatible = "regulator-fixed";
@@ -241,7 +248,7 @@
 
 &gpio {
 	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex_perst_n {
+	pex-perst-n {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index 573aaa50fff1..367eb8c86098 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -11,23 +11,19 @@
  * Compatible for Revisions 2GB: V1.2A
  */
 / {
-	model = "Toradex Apalis TK1";
-	compatible = "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1",
-		     "nvidia,tegra124";
-
 	memory@80000000 {
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
 	pcie@1003000 {
 		status = "okay";
-		avddio-pex-supply = <&vdd_1v05>;
-		avdd-pex-pll-supply = <&vdd_1v05>;
-		avdd-pll-erefe-supply = <&avdd_1v05>;
-		dvddio-pex-supply = <&vdd_1v05>;
-		hvdd-pex-pll-e-supply = <&reg_3v3>;
-		hvdd-pex-supply = <&reg_3v3>;
-		vddio-pex-ctl-supply = <&reg_3v3>;
+		avddio-pex-supply = <&reg_1v05_vdd>;
+		avdd-pex-pll-supply = <&reg_1v05_vdd>;
+		avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+		dvddio-pex-supply = <&reg_1v05_vdd>;
+		hvdd-pex-pll-e-supply = <&reg_module_3v3>;
+		hvdd-pex-supply = <&reg_module_3v3>;
+		vddio-pex-ctl-supply = <&reg_module_3v3>;
 
 		/* Apalis PCIe (additional lane Apalis type specific) */
 		pci@1,0 {
@@ -42,16 +38,21 @@
 			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
 			phy-names = "pcie-0";
 			status = "okay";
+
+			pcie@0 {
+				reg = <0 0 0 0 0>;
+				local-mac-address = [00 00 00 00 00 00];
+			};
 		};
 	};
 
 	host1x@50000000 {
 		hdmi@54280000 {
-			pll-supply = <&reg_1v05_avdd_hdmi_pll>;
-			vdd-supply = <&reg_3v3_avdd_hdmi>;
 			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
 			nvidia,hpd-gpio =
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			pll-supply = <&reg_1v05_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
 		};
 	};
 
@@ -60,44 +61,44 @@
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
 		 */
-		vdd-supply = <&vdd_gpu>;
+		vdd-supply = <&reg_vdd_gpu>;
 	};
 
-	pinmux: pinmux@70000868 {
+	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
 
 		state_default: pinmux {
 			/* Analogue Audio (On-module) */
-			dap3_fs_pp0 {
+			dap3-fs-pp0 {
 				nvidia,pins = "dap3_fs_pp0";
 				nvidia,function = "i2s2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap3_din_pp1 {
+			dap3-din-pp1 {
 				nvidia,pins = "dap3_din_pp1";
 				nvidia,function = "i2s2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			dap3_dout_pp2 {
+			dap3-dout-pp2 {
 				nvidia,pins = "dap3_dout_pp2";
 				nvidia,function = "i2s2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap3_sclk_pp3 {
+			dap3-sclk-pp3 {
 				nvidia,pins = "dap3_sclk_pp3";
 				nvidia,function = "i2s2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap_mclk1_pw4 {
+			dap-mclk1-pw4 {
 				nvidia,pins = "dap_mclk1_pw4";
 				nvidia,function = "extperiph1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -124,7 +125,7 @@
 			};
 
 			/* Apalis CAM1_MCLK */
-			cam_mclk_pcc0 {
+			cam-mclk-pcc0 {
 				nvidia,pins = "cam_mclk_pcc0";
 				nvidia,function = "vi_alt3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -133,28 +134,28 @@
 			};
 
 			/* Apalis Digital Audio */
-			dap2_fs_pa2 {
+			dap2-fs-pa2 {
 				nvidia,pins = "dap2_fs_pa2";
 				nvidia,function = "hda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			dap2_sclk_pa3 {
+			dap2-sclk-pa3 {
 				nvidia,pins = "dap2_sclk_pa3";
 				nvidia,function = "hda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			dap2_din_pa4 {
+			dap2-din-pa4 {
 				nvidia,pins = "dap2_din_pa4";
 				nvidia,function = "hda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			dap2_dout_pa5 {
+			dap2-dout-pa5 {
 				nvidia,pins = "dap2_dout_pa5";
 				nvidia,function = "hda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -167,7 +168,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			clk3_out_pee0 {
+			clk3-out-pee0 {
 				nvidia,pins = "clk3_out_pee0";
 				nvidia,function = "extperiph3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -176,7 +177,7 @@
 			};
 
 			/* Apalis GPIO */
-			usb_vbus_en0_pn4 {
+			usb-vbus-en0-pn4 {
 				nvidia,pins = "usb_vbus_en0_pn4";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -184,7 +185,7 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
 			};
-			usb_vbus_en1_pn5 {
+			usb-vbus-en1-pn5 {
 				nvidia,pins = "usb_vbus_en1_pn5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -192,35 +193,35 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
 			};
-			pex_l0_rst_n_pdd1 {
+			pex-l0-rst-n-pdd1 {
 				nvidia,pins = "pex_l0_rst_n_pdd1";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			pex_l0_clkreq_n_pdd2 {
+			pex-l0-clkreq-n-pdd2 {
 				nvidia,pins = "pex_l0_clkreq_n_pdd2";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			pex_l1_rst_n_pdd5 {
+			pex-l1-rst-n-pdd5 {
 				nvidia,pins = "pex_l1_rst_n_pdd5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			pex_l1_clkreq_n_pdd6 {
+			pex-l1-clkreq-n-pdd6 {
 				nvidia,pins = "pex_l1_clkreq_n_pdd6";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			dp_hpd_pff0 {
+			dp-hpd-pff0 {
 				nvidia,pins = "dp_hpd_pff0";
 				nvidia,function = "dp";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -244,7 +245,7 @@
 			};
 
 			/* Apalis HDMI1_CEC */
-			hdmi_cec_pee3 {
+			hdmi-cec-pee3 {
 				nvidia,pins = "hdmi_cec_pee3";
 				nvidia,function = "cec";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -254,7 +255,7 @@
 			};
 
 			/* Apalis HDMI1_HPD */
-			hdmi_int_pn7 {
+			hdmi-int-pn7 {
 				nvidia,pins = "hdmi_int_pn7";
 				nvidia,function = "rsvd1";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -264,7 +265,7 @@
 			};
 
 			/* Apalis I2C1 */
-			gen1_i2c_scl_pc4 {
+			gen1-i2c-scl-pc4 {
 				nvidia,pins = "gen1_i2c_scl_pc4";
 				nvidia,function = "i2c1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -272,7 +273,7 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
 			};
-			gen1_i2c_sda_pc5 {
+			gen1-i2c-sda-pc5 {
 				nvidia,pins = "gen1_i2c_sda_pc5";
 				nvidia,function = "i2c1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -282,7 +283,7 @@
 			};
 
 			/* Apalis I2C3 (CAM) */
-			cam_i2c_scl_pbb1 {
+			cam-i2c-scl-pbb1 {
 				nvidia,pins = "cam_i2c_scl_pbb1";
 				nvidia,function = "i2c3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -290,7 +291,7 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
 			};
-			cam_i2c_sda_pbb2 {
+			cam-i2c-sda-pbb2 {
 				nvidia,pins = "cam_i2c_sda_pbb2";
 				nvidia,function = "i2c3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -300,7 +301,7 @@
 			};
 
 			/* Apalis I2C4 (DDC) */
-			ddc_scl_pv4 {
+			ddc-scl-pv4 {
 				nvidia,pins = "ddc_scl_pv4";
 				nvidia,function = "i2c4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -308,7 +309,7 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
 			};
-			ddc_sda_pv5 {
+			ddc-sda-pv5 {
 				nvidia,pins = "ddc_sda_pv5";
 				nvidia,function = "i2c4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -318,77 +319,77 @@
 			};
 
 			/* Apalis MMC1 */
-			sdmmc1_cd_n_pv3 { /* CD# GPIO */
+			sdmmc1-cd-n-pv3 { /* CD# GPIO */
 				nvidia,pins = "sdmmc1_wp_n_pv3";
 				nvidia,function = "sdmmc1";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			clk2_out_pw5 { /* D5 GPIO */
+			clk2-out-pw5 { /* D5 GPIO */
 				nvidia,pins = "clk2_out_pw5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc1_dat3_py4 {
+			sdmmc1-dat3-py4 {
 				nvidia,pins = "sdmmc1_dat3_py4";
 				nvidia,function = "sdmmc1";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc1_dat2_py5 {
+			sdmmc1-dat2-py5 {
 				nvidia,pins = "sdmmc1_dat2_py5";
 				nvidia,function = "sdmmc1";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc1_dat1_py6 {
+			sdmmc1-dat1-py6 {
 				nvidia,pins = "sdmmc1_dat1_py6";
 				nvidia,function = "sdmmc1";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc1_dat0_py7 {
+			sdmmc1-dat0-py7 {
 				nvidia,pins = "sdmmc1_dat0_py7";
 				nvidia,function = "sdmmc1";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc1_clk_pz0 {
+			sdmmc1-clk-pz0 {
 				nvidia,pins = "sdmmc1_clk_pz0";
 				nvidia,function = "sdmmc1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc1_cmd_pz1 {
+			sdmmc1-cmd-pz1 {
 				nvidia,pins = "sdmmc1_cmd_pz1";
 				nvidia,function = "sdmmc1";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			clk2_req_pcc5 { /* D4 GPIO */
+			clk2-req-pcc5 { /* D4 GPIO */
 				nvidia,pins = "clk2_req_pcc5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */
+			sdmmc3-clk-lb-in-pee5 { /* D6 GPIO */
 				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			usb_vbus_en2_pff1 { /* D7 GPIO */
+			usb-vbus-en2-pff1 { /* D7 GPIO */
 				nvidia,pins = "usb_vbus_en2_pff1";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -428,7 +429,7 @@
 			};
 
 			/* Apalis SATA1_ACT# */
-			dap1_dout_pn2 {
+			dap1-dout-pn2 {
 				nvidia,pins = "dap1_dout_pn2";
 				nvidia,function = "gmi";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -437,49 +438,49 @@
 			};
 
 			/* Apalis SD1 */
-			sdmmc3_clk_pa6 {
+			sdmmc3-clk-pa6 {
 				nvidia,pins = "sdmmc3_clk_pa6";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc3_cmd_pa7 {
+			sdmmc3-cmd-pa7 {
 				nvidia,pins = "sdmmc3_cmd_pa7";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc3_dat3_pb4 {
+			sdmmc3-dat3-pb4 {
 				nvidia,pins = "sdmmc3_dat3_pb4";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc3_dat2_pb5 {
+			sdmmc3-dat2-pb5 {
 				nvidia,pins = "sdmmc3_dat2_pb5";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc3_dat1_pb6 {
+			sdmmc3-dat1-pb6 {
 				nvidia,pins = "sdmmc3_dat1_pb6";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc3_dat0_pb7 {
+			sdmmc3-dat0-pb7 {
 				nvidia,pins = "sdmmc3_dat0_pb7";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc3_cd_n_pv2 { /* CD# GPIO */
+			sdmmc3-cd-n-pv2 { /* CD# GPIO */
 				nvidia,pins = "sdmmc3_cd_n_pv2";
 				nvidia,function = "rsvd3";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -488,14 +489,14 @@
 			};
 
 			/* Apalis SPDIF */
-			spdif_out_pk5 {
+			spdif-out-pk5 {
 				nvidia,pins = "spdif_out_pk5";
 				nvidia,function = "spdif";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			spdif_in_pk6 {
+			spdif-in-pk6 {
 				nvidia,pins = "spdif_in_pk6";
 				nvidia,function = "spdif";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -504,28 +505,28 @@
 			};
 
 			/* Apalis SPI1 */
-			ulpi_clk_py0 {
+			ulpi-clk-py0 {
 				nvidia,pins = "ulpi_clk_py0";
 				nvidia,function = "spi1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			ulpi_dir_py1 {
+			ulpi-dir-py1 {
 				nvidia,pins = "ulpi_dir_py1";
 				nvidia,function = "spi1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			ulpi_nxt_py2 {
+			ulpi-nxt-py2 {
 				nvidia,pins = "ulpi_nxt_py2";
 				nvidia,function = "spi1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			ulpi_stp_py3 {
+			ulpi-stp-py3 {
 				nvidia,pins = "ulpi_stp_py3";
 				nvidia,function = "spi1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -578,42 +579,42 @@
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			uart1_txd_pu0 {
+			uart1-txd-pu0 {
 				nvidia,pins = "pu0";
 				nvidia,function = "uarta";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			uart1_rxd_pu1 {
+			uart1-rxd-pu1 {
 				nvidia,pins = "pu1";
 				nvidia,function = "uarta";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			uart1_cts_n_pu2 {
+			uart1-cts-n-pu2 {
 				nvidia,pins = "pu2";
 				nvidia,function = "uarta";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			uart1_rts_n_pu3 {
+			uart1-rts-n-pu3 {
 				nvidia,pins = "pu3";
 				nvidia,function = "uarta";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			uart3_cts_n_pa1 { /* DSR GPIO */
+			uart3-cts-n-pa1 { /* DSR GPIO */
 				nvidia,pins = "uart3_cts_n_pa1";
 				nvidia,function = "gmi";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			uart3_rts_n_pc0 { /* DTR GPIO */
+			uart3-rts-n-pc0 { /* DTR GPIO */
 				nvidia,pins = "uart3_rts_n_pc0";
 				nvidia,function = "gmi";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -622,28 +623,28 @@
 			};
 
 			/* Apalis UART2 */
-			uart2_txd_pc2 {
+			uart2-txd-pc2 {
 				nvidia,pins = "uart2_txd_pc2";
 				nvidia,function = "irda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			uart2_rxd_pc3 {
+			uart2-rxd-pc3 {
 				nvidia,pins = "uart2_rxd_pc3";
 				nvidia,function = "irda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			uart2_cts_n_pj5 {
+			uart2-cts-n-pj5 {
 				nvidia,pins = "uart2_cts_n_pj5";
 				nvidia,function = "uartb";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			uart2_rts_n_pj6 {
+			uart2-rts-n-pj6 {
 				nvidia,pins = "uart2_rts_n_pj6";
 				nvidia,function = "uartb";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -652,14 +653,14 @@
 			};
 
 			/* Apalis UART3 */
-			uart3_txd_pw6 {
+			uart3-txd-pw6 {
 				nvidia,pins = "uart3_txd_pw6";
 				nvidia,function = "uartc";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			uart3_rxd_pw7 {
+			uart3-rxd-pw7 {
 				nvidia,pins = "uart3_rxd_pw7";
 				nvidia,function = "uartc";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -668,14 +669,14 @@
 			};
 
 			/* Apalis UART4 */
-			uart4_rxd_pb0 {
+			uart4-rxd-pb0 {
 				nvidia,pins = "pb0";
 				nvidia,function = "uartd";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			uart4_txd_pj7 {
+			uart4-txd-pj7 {
 				nvidia,pins = "pj7";
 				nvidia,function = "uartd";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -684,7 +685,7 @@
 			};
 
 			/* Apalis USBH_EN */
-			gen2_i2c_sda_pt6 {
+			gen2-i2c-sda-pt6 {
 				nvidia,pins = "gen2_i2c_sda_pt6";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -703,7 +704,7 @@
 			};
 
 			/* Apalis USBO1_EN */
-			gen2_i2c_scl_pt5 {
+			gen2-i2c-scl-pt5 {
 				nvidia,pins = "gen2_i2c_scl_pt5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -722,7 +723,7 @@
 			};
 
 			/* Apalis WAKE1_MICO */
-			pex_wake_n_pdd3 {
+			pex-wake-n-pdd3 {
 				nvidia,pins = "pex_wake_n_pdd3";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -731,7 +732,7 @@
 			};
 
 			/* CORE_PWR_REQ */
-			core_pwr_req {
+			core-pwr-req {
 				nvidia,pins = "core_pwr_req";
 				nvidia,function = "pwron";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -740,7 +741,7 @@
 			};
 
 			/* CPU_PWR_REQ */
-			cpu_pwr_req {
+			cpu-pwr-req {
 				nvidia,pins = "cpu_pwr_req";
 				nvidia,function = "cpu";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -749,14 +750,14 @@
 			};
 
 			/* DVFS */
-			dvfs_pwm_px0 {
+			dvfs-pwm-px0 {
 				nvidia,pins = "dvfs_pwm_px0";
 				nvidia,function = "cldvfs";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dvfs_clk_px2 {
+			dvfs-clk-px2 {
 				nvidia,pins = "dvfs_clk_px2";
 				nvidia,function = "cldvfs";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -765,70 +766,70 @@
 			};
 
 			/* eMMC */
-			sdmmc4_dat0_paa0 {
+			sdmmc4-dat0-paa0 {
 				nvidia,pins = "sdmmc4_dat0_paa0";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_dat1_paa1 {
+			sdmmc4-dat1-paa1 {
 				nvidia,pins = "sdmmc4_dat1_paa1";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_dat2_paa2 {
+			sdmmc4-dat2-paa2 {
 				nvidia,pins = "sdmmc4_dat2_paa2";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_dat3_paa3 {
+			sdmmc4-dat3-paa3 {
 				nvidia,pins = "sdmmc4_dat3_paa3";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_dat4_paa4 {
+			sdmmc4-dat4-paa4 {
 				nvidia,pins = "sdmmc4_dat4_paa4";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_dat5_paa5 {
+			sdmmc4-dat5-paa5 {
 				nvidia,pins = "sdmmc4_dat5_paa5";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_dat6_paa6 {
+			sdmmc4-dat6-paa6 {
 				nvidia,pins = "sdmmc4_dat6_paa6";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_dat7_paa7 {
+			sdmmc4-dat7-paa7 {
 				nvidia,pins = "sdmmc4_dat7_paa7";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_clk_pcc4 {
+			sdmmc4-clk-pcc4 {
 				nvidia,pins = "sdmmc4_clk_pcc4";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_cmd_pt7 {
+			sdmmc4-cmd-pt7 {
 				nvidia,pins = "sdmmc4_cmd_pt7";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -837,7 +838,7 @@
 			};
 
 			/* JTAG_RTCK */
-			jtag_rtck {
+			jtag-rtck {
 				nvidia,pins = "jtag_rtck";
 				nvidia,function = "rtck";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -846,7 +847,7 @@
 			};
 
 			/* LAN_DEV_OFF# */
-			ulpi_data5_po6 {
+			ulpi-data5-po6 {
 				nvidia,pins = "ulpi_data5_po6";
 				nvidia,function = "ulpi";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -855,7 +856,7 @@
 			};
 
 			/* LAN_RESET# */
-			kb_row10_ps2 {
+			kb-row10-ps2 {
 				nvidia,pins = "kb_row10_ps2";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -864,7 +865,7 @@
 			};
 
 			/* LAN_WAKE# */
-			ulpi_data4_po5 {
+			ulpi-data4-po5 {
 				nvidia,pins = "ulpi_data4_po5";
 				nvidia,function = "ulpi";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -918,35 +919,35 @@
 			};
 
 			/* MCU SPI */
-			gpio_x4_aud_px4 {
+			gpio-x4-aud-px4 {
 				nvidia,pins = "gpio_x4_aud_px4";
 				nvidia,function = "spi2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			gpio_x5_aud_px5 {
+			gpio-x5-aud-px5 {
 				nvidia,pins = "gpio_x5_aud_px5";
 				nvidia,function = "spi2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			gpio_x6_aud_px6 { /* MCU_CS */
+			gpio-x6-aud-px6 { /* MCU_CS */
 				nvidia,pins = "gpio_x6_aud_px6";
 				nvidia,function = "spi2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			gpio_x7_aud_px7 {
+			gpio-x7-aud-px7 {
 				nvidia,pins = "gpio_x7_aud_px7";
 				nvidia,function = "spi2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			gpio_w2_aud_pw2 { /* MCU_CSEZP */
+			gpio-w2-aud-pw2 { /* MCU_CSEZP */
 				nvidia,pins = "gpio_w2_aud_pw2";
 				nvidia,function = "spi2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -955,7 +956,7 @@
 			};
 
 			/* PMIC_CLK_32K */
-			clk_32k_in {
+			clk-32k-in {
 				nvidia,pins = "clk_32k_in";
 				nvidia,function = "clk";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -964,7 +965,7 @@
 			};
 
 			/* PMIC_CPU_OC_INT */
-			clk_32k_out_pa0 {
+			clk-32k-out-pa0 {
 				nvidia,pins = "clk_32k_out_pa0";
 				nvidia,function = "soc";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -973,7 +974,7 @@
 			};
 
 			/* PWR_I2C */
-			pwr_i2c_scl_pz6 {
+			pwr-i2c-scl-pz6 {
 				nvidia,pins = "pwr_i2c_scl_pz6";
 				nvidia,function = "i2cpwr";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -981,7 +982,7 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
 			};
-			pwr_i2c_sda_pz7 {
+			pwr-i2c-sda-pz7 {
 				nvidia,pins = "pwr_i2c_sda_pz7";
 				nvidia,function = "i2cpwr";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -991,7 +992,7 @@
 			};
 
 			/* PWR_INT_N */
-			pwr_int_n {
+			pwr-int-n {
 				nvidia,pins = "pwr_int_n";
 				nvidia,function = "pmi";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -1009,7 +1010,7 @@
 			};
 
 			/* RESET_OUT_N */
-			reset_out_n {
+			reset-out-n {
 				nvidia,pins = "reset_out_n";
 				nvidia,function = "reset_out_n";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1018,14 +1019,14 @@
 			};
 
 			/* SHIFT_CTRL_DIR_IN */
-			kb_row0_pr0 {
+			kb-row0-pr0 {
 				nvidia,pins = "kb_row0_pr0";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row1_pr1 {
+			kb-row1-pr1 {
 				nvidia,pins = "kb_row1_pr1";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1034,7 +1035,7 @@
 			};
 
 			/* Configure level-shifter as output for HDA */
-			kb_row11_ps3 {
+			kb-row11-ps3 {
 				nvidia,pins = "kb_row11_ps3";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -1043,21 +1044,21 @@
 			};
 
 			/* SHIFT_CTRL_DIR_OUT */
-			kb_col5_pq5 {
+			kb-col5-pq5 {
 				nvidia,pins = "kb_col5_pq5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_col6_pq6 {
+			kb-col6-pq6 {
 				nvidia,pins = "kb_col6_pq6";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_col7_pq7 {
+			kb-col7-pq7 {
 				nvidia,pins = "kb_col7_pq7";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -1066,35 +1067,35 @@
 			};
 
 			/* SHIFT_CTRL_OE */
-			kb_col0_pq0 {
+			kb-col0-pq0 {
 				nvidia,pins = "kb_col0_pq0";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_col1_pq1 {
+			kb-col1-pq1 {
 				nvidia,pins = "kb_col1_pq1";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_col2_pq2 {
+			kb-col2-pq2 {
 				nvidia,pins = "kb_col2_pq2";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_col4_pq4 {
+			kb-col4-pq4 {
 				nvidia,pins = "kb_col4_pq4";
 				nvidia,function = "kbc";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row2_pr2 {
+			kb-row2-pr2 {
 				nvidia,pins = "kb_row2_pr2";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1112,7 +1113,7 @@
 			};
 
 			/* TOUCH_INT */
-			gpio_w3_aud_pw3 {
+			gpio-w3-aud-pw3 {
 				nvidia,pins = "gpio_w3_aud_pw3";
 				nvidia,function = "spi6";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1253,189 +1254,189 @@
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap1_fs_pn0 { /* NC */
+			dap1-fs-pn0 { /* NC */
 				nvidia,pins = "dap1_fs_pn0";
 				nvidia,function = "rsvd4";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap1_din_pn1 { /* NC */
+			dap1-din-pn1 { /* NC */
 				nvidia,pins = "dap1_din_pn1";
 				nvidia,function = "rsvd4";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap1_sclk_pn3 { /* NC */
+			dap1-sclk-pn3 { /* NC */
 				nvidia,pins = "dap1_sclk_pn3";
 				nvidia,function = "rsvd4";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			ulpi_data7_po0 { /* NC */
+			ulpi-data7-po0 { /* NC */
 				nvidia,pins = "ulpi_data7_po0";
 				nvidia,function = "ulpi";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			ulpi_data0_po1 { /* NC */
+			ulpi-data0-po1 { /* NC */
 				nvidia,pins = "ulpi_data0_po1";
 				nvidia,function = "ulpi";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			ulpi_data1_po2 { /* NC */
+			ulpi-data1-po2 { /* NC */
 				nvidia,pins = "ulpi_data1_po2";
 				nvidia,function = "ulpi";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			ulpi_data2_po3 { /* NC */
+			ulpi-data2-po3 { /* NC */
 				nvidia,pins = "ulpi_data2_po3";
 				nvidia,function = "ulpi";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			ulpi_data3_po4 { /* NC */
+			ulpi-data3-po4 { /* NC */
 				nvidia,pins = "ulpi_data3_po4";
 				nvidia,function = "ulpi";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			ulpi_data6_po7 { /* NC */
+			ulpi-data6-po7 { /* NC */
 				nvidia,pins = "ulpi_data6_po7";
 				nvidia,function = "ulpi";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap4_fs_pp4 { /* NC */
+			dap4-fs-pp4 { /* NC */
 				nvidia,pins = "dap4_fs_pp4";
 				nvidia,function = "rsvd4";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap4_din_pp5 { /* NC */
+			dap4-din-pp5 { /* NC */
 				nvidia,pins = "dap4_din_pp5";
 				nvidia,function = "rsvd3";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap4_dout_pp6 { /* NC */
+			dap4-dout-pp6 { /* NC */
 				nvidia,pins = "dap4_dout_pp6";
 				nvidia,function = "rsvd4";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap4_sclk_pp7 { /* NC */
+			dap4-sclk-pp7 { /* NC */
 				nvidia,pins = "dap4_sclk_pp7";
 				nvidia,function = "rsvd3";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_col3_pq3 { /* NC */
+			kb-col3-pq3 { /* NC */
 				nvidia,pins = "kb_col3_pq3";
 				nvidia,function = "kbc";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row3_pr3 { /* NC */
+			kb-row3-pr3 { /* NC */
 				nvidia,pins = "kb_row3_pr3";
 				nvidia,function = "kbc";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row4_pr4 { /* NC */
+			kb-row4-pr4 { /* NC */
 				nvidia,pins = "kb_row4_pr4";
 				nvidia,function = "rsvd3";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row5_pr5 { /* NC */
+			kb-row5-pr5 { /* NC */
 				nvidia,pins = "kb_row5_pr5";
 				nvidia,function = "rsvd3";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row6_pr6 { /* NC */
+			kb-row6-pr6 { /* NC */
 				nvidia,pins = "kb_row6_pr6";
 				nvidia,function = "kbc";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row7_pr7 { /* NC */
+			kb-row7-pr7 { /* NC */
 				nvidia,pins = "kb_row7_pr7";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row8_ps0 { /* NC */
+			kb-row8-ps0 { /* NC */
 				nvidia,pins = "kb_row8_ps0";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row9_ps1 { /* NC */
+			kb-row9-ps1 { /* NC */
 				nvidia,pins = "kb_row9_ps1";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row12_ps4 { /* NC */
+			kb-row12-ps4 { /* NC */
 				nvidia,pins = "kb_row12_ps4";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row13_ps5 { /* NC */
+			kb-row13-ps5 { /* NC */
 				nvidia,pins = "kb_row13_ps5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row14_ps6 { /* NC */
+			kb-row14-ps6 { /* NC */
 				nvidia,pins = "kb_row14_ps6";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row15_ps7 { /* NC */
+			kb-row15-ps7 { /* NC */
 				nvidia,pins = "kb_row15_ps7";
 				nvidia,function = "rsvd3";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row16_pt0 { /* NC */
+			kb-row16-pt0 { /* NC */
 				nvidia,pins = "kb_row16_pt0";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row17_pt1 { /* NC */
+			kb-row17-pt1 { /* NC */
 				nvidia,pins = "kb_row17_pt1";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1467,14 +1468,14 @@
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			gpio_x1_aud_px1 { /* NC */
+			gpio-x1-aud-px1 { /* NC */
 				nvidia,pins = "gpio_x1_aud_px1";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			gpio_x3_aud_px3 { /* NC */
+			gpio-x3-aud-px3 { /* NC */
 				nvidia,pins = "gpio_x3_aud_px3";
 				nvidia,function = "rsvd4";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1502,14 +1503,14 @@
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			clk3_req_pee1 { /* NC */
+			clk3-req-pee1 { /* NC */
 				nvidia,pins = "clk3_req_pee1";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap_mclk1_req_pee2 { /* NC */
+			dap-mclk1-req-pee2 { /* NC */
 				nvidia,pins = "dap_mclk1_req_pee2";
 				nvidia,function = "rsvd4";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1525,7 +1526,7 @@
 			 * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
 			 * bits being set to 0xfffd according to the TRM!
 			 */
-			sdmmc3_clk_lb_out_pee4 { /* NC */
+			sdmmc3-clk-lb-out-pee4 { /* NC */
 				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1560,8 +1561,9 @@
 		sgtl5000: codec@a {
 			compatible = "fsl,sgtl5000";
 			reg = <0x0a>;
-			VDDA-supply = <&reg_3v3>;
-			VDDIO-supply = <&vddio_1v8>;
+			VDDA-supply = <&reg_module_3v3_audio>;
+			VDDD-supply = <&reg_1v8_vddio>;
+			VDDIO-supply = <&reg_1v8_vddio>;
 			clocks = <&tegra_car TEGRA124_CLK_EXTERN1>;
 		};
 
@@ -1578,14 +1580,14 @@
 			pinctrl-0 = <&as3722_default>;
 
 			as3722_default: pinmux {
-				gpio2_7 {
+				gpio2-7 {
 					pins = "gpio2", /* PWR_EN_+V3.3 */
 					       "gpio7"; /* +V1.6_LPO */
 					function = "gpio";
 					bias-pull-up;
 				};
 
-				gpio0_1_3_4_5_6 {
+				gpio0-1-3-4-5-6 {
 					pins = "gpio0", "gpio1", "gpio3",
 					       "gpio4", "gpio5", "gpio6";
 					bias-high-impedance;
@@ -1593,18 +1595,18 @@
 			};
 
 			regulators {
-				vsup-sd2-supply = <&reg_3v3>;
-				vsup-sd3-supply = <&reg_3v3>;
-				vsup-sd4-supply = <&reg_3v3>;
-				vsup-sd5-supply = <&reg_3v3>;
-				vin-ldo0-supply = <&vddio_ddr_1v35>;
-				vin-ldo1-6-supply = <&reg_3v3>;
-				vin-ldo2-5-7-supply = <&vddio_1v8>;
-				vin-ldo3-4-supply = <&reg_3v3>;
-				vin-ldo9-10-supply = <&reg_3v3>;
-				vin-ldo11-supply = <&reg_3v3>;
-
-				vdd_cpu: sd0 {
+				vsup-sd2-supply = <&reg_module_3v3>;
+				vsup-sd3-supply = <&reg_module_3v3>;
+				vsup-sd4-supply = <&reg_module_3v3>;
+				vsup-sd5-supply = <&reg_module_3v3>;
+				vin-ldo0-supply = <&reg_1v35_vddio_ddr>;
+				vin-ldo1-6-supply = <&reg_module_3v3>;
+				vin-ldo2-5-7-supply = <&reg_1v8_vddio>;
+				vin-ldo3-4-supply = <&reg_module_3v3>;
+				vin-ldo9-10-supply = <&reg_module_3v3>;
+				vin-ldo11-supply = <&reg_module_3v3>;
+
+				reg_vdd_cpu: sd0 {
 					regulator-name = "+VDD_CPU_AP";
 					regulator-min-microvolt = <700000>;
 					regulator-max-microvolt = <1400000>;
@@ -1626,7 +1628,7 @@
 					ams,ext-control = <1>;
 				};
 
-				vddio_ddr_1v35: sd2 {
+				reg_1v35_vddio_ddr: sd2 {
 					regulator-name =
 						"+V1.35_VDDIO_DDR(sd2)";
 					regulator-min-microvolt = <1350000>;
@@ -1644,13 +1646,13 @@
 					regulator-boot-on;
 				};
 
-				vdd_1v05: sd4 {
+				reg_1v05_vdd: sd4 {
 					regulator-name = "+V1.05";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
 				};
 
-				vddio_1v8: sd5 {
+				reg_1v8_vddio: sd5 {
 					regulator-name = "+V1.8";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -1658,7 +1660,7 @@
 					regulator-always-on;
 				};
 
-				vdd_gpu: sd6 {
+				reg_vdd_gpu: sd6 {
 					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
@@ -1668,7 +1670,7 @@
 					regulator-always-on;
 				};
 
-				avdd_1v05: ldo0 {
+				reg_1v05_avdd: ldo0 {
 					regulator-name = "+V1.05_AVDD";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
@@ -1743,12 +1745,13 @@
 		 * TMP451 temperature sensor
 		 * Note: THERM_N directly connected to AS3722 PMIC THERM
 		 */
-		temperature-sensor@4c {
+		temp-sensor@4c {
 			compatible = "ti,tmp451";
 			reg = <0x4c>;
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
 			#thermal-sensor-cells = <1>;
+			vcc-supply = <&reg_module_3v3>;
 		};
 	};
 
@@ -1780,9 +1783,9 @@
 	sata@70020000 {
 		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
 		phy-names = "sata-0";
-		avdd-supply = <&vdd_1v05>;
-		hvdd-supply = <&reg_3v3>;
-		vddio-supply = <&vdd_1v05>;
+		avdd-supply = <&reg_1v05_vdd>;
+		hvdd-supply = <&reg_module_3v3>;
+		vddio-supply = <&reg_1v05_vdd>;
 	};
 
 	usb@70090000 {
@@ -1793,14 +1796,14 @@
 		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
 		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
 		phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
-		avddio-pex-supply = <&vdd_1v05>;
-		avdd-pll-erefe-supply = <&avdd_1v05>;
-		avdd-pll-utmip-supply = <&vddio_1v8>;
-		avdd-usb-ss-pll-supply = <&vdd_1v05>;
-		avdd-usb-supply = <&reg_3v3>;
-		dvddio-pex-supply = <&vdd_1v05>;
-		hvdd-usb-ss-pll-e-supply = <&reg_3v3>;
-		hvdd-usb-ss-supply = <&reg_3v3>;
+		avddio-pex-supply = <&reg_1v05_vdd>;
+		avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+		avdd-pll-utmip-supply = <&reg_1v8_vddio>;
+		avdd-usb-ss-pll-supply = <&reg_1v05_vdd>;
+		avdd-usb-supply = <&reg_module_3v3>;
+		dvddio-pex-supply = <&reg_1v05_vdd>;
+		hvdd-usb-ss-pll-e-supply = <&reg_module_3v3>;
+		hvdd-usb-ss-supply = <&reg_module_3v3>;
 	};
 
 	padctl@7009f000 {
@@ -1810,18 +1813,18 @@
 
 				lanes {
 					usb2-0 {
-						nvidia,function = "xusb";
 						status = "okay";
+						nvidia,function = "xusb";
 					};
 
 					usb2-1 {
-						nvidia,function = "xusb";
 						status = "okay";
+						nvidia,function = "xusb";
 					};
 
 					usb2-2 {
-						nvidia,function = "xusb";
 						status = "okay";
+						nvidia,function = "xusb";
 					};
 				};
 			};
@@ -1831,28 +1834,28 @@
 
 				lanes {
 					pcie-0 {
-						nvidia,function = "usb3-ss";
 						status = "okay";
+						nvidia,function = "usb3-ss";
 					};
 
 					pcie-1 {
-						nvidia,function = "usb3-ss";
 						status = "okay";
+						nvidia,function = "usb3-ss";
 					};
 
 					pcie-2 {
-						nvidia,function = "pcie";
 						status = "okay";
+						nvidia,function = "pcie";
 					};
 
 					pcie-3 {
-						nvidia,function = "pcie";
 						status = "okay";
+						nvidia,function = "pcie";
 					};
 
 					pcie-4 {
-						nvidia,function = "pcie";
 						status = "okay";
+						nvidia,function = "pcie";
 					};
 				};
 			};
@@ -1862,8 +1865,8 @@
 
 				lanes {
 					sata-0 {
-						nvidia,function = "sata";
 						status = "okay";
+						nvidia,function = "sata";
 					};
 				};
 			};
@@ -1874,7 +1877,6 @@
 			usb2-0 {
 				status = "okay";
 				mode = "otg";
-
 				vbus-supply = <&reg_usbo1_vbus>;
 			};
 
@@ -1882,7 +1884,6 @@
 			usb2-1 {
 				status = "okay";
 				mode = "host";
-
 				vbus-supply = <&reg_usbh_vbus>;
 			};
 
@@ -1890,18 +1891,19 @@
 			usb2-2 {
 				status = "okay";
 				mode = "host";
-
 				vbus-supply = <&reg_usbh_vbus>;
 			};
 
 			usb3-0 {
-				nvidia,usb2-companion = <2>;
 				status = "okay";
+				nvidia,usb2-companion = <2>;
+				vbus-supply = <&reg_usbh_vbus>;
 			};
 
 			usb3-1 {
-				nvidia,usb2-companion = <0>;
 				status = "okay";
+				nvidia,usb2-companion = <0>;
+				vbus-supply = <&reg_usbo1_vbus>;
 			};
 		};
 	};
@@ -1911,13 +1913,16 @@
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
+		vmmc-supply = <&reg_module_3v3>; /* VCC */
+		vqmmc-supply = <&reg_1v8_vddio>; /* VCCQ */
+		mmc-ddr-1_8v;
 	};
 
 	/* CPU DFLL clock */
 	clock@70110000 {
 		status = "okay";
-		vdd-cpu-supply = <&vdd_cpu>;
 		nvidia,i2c-fs-rate = <400000>;
+		vdd-cpu-supply = <&reg_vdd_cpu>;
 	};
 
 	ahub@70300000 {
@@ -1926,22 +1931,15 @@
 		};
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
 	};
 
 	cpus {
 		cpu@0 {
-			vdd-cpu-supply = <&vdd_cpu>;
+			vdd-cpu-supply = <&reg_vdd_cpu>;
 		};
 	};
 
@@ -1951,7 +1949,7 @@
 		regulator-min-microvolt = <1050000>;
 		regulator-max-microvolt = <1050000>;
 		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
-		vin-supply = <&vdd_1v05>;
+		vin-supply = <&reg_1v05_vdd>;
 	};
 
 	reg_3v3_mxm: regulator-3v3-mxm {
@@ -1963,7 +1961,15 @@
 		regulator-boot-on;
 	};
 
-	reg_3v3: regulator-3v3 {
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_1v05_vdd>;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "+V3.3";
 		regulator-min-microvolt = <3300000>;
@@ -1976,12 +1982,12 @@
 		vin-supply = <&reg_3v3_mxm>;
 	};
 
-	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+	reg_module_3v3_audio: regulator-module-3v3-audio {
 		compatible = "regulator-fixed";
-		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-name = "+V3.3_AUDIO_AVDD_S";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vdd_1v05>;
+		regulator-always-on;
 	};
 
 	sound {
@@ -2035,7 +2041,7 @@
 
 &gpio {
 	/* I210 Gigabit Ethernet Controller Reset */
-	lan_reset_n {
+	lan-reset-n {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -2043,7 +2049,7 @@
 	};
 
 	/* Control MXM3 pin 26 Reset Module Output Carrier Input */
-	reset_moci_ctrl {
+	reset-moci-ctrl {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 0f0d4a4988b9..13c93cd507d8 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -47,22 +47,19 @@
  * Compatible for Revisions 2GB: V1.0A, V1.0B, V1.1A
  */
 / {
-	model = "Toradex Apalis TK1";
-	compatible = "toradex,apalis-tk1", "nvidia,tegra124";
-
 	memory@80000000 {
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
 	pcie@1003000 {
 		status = "okay";
-		avddio-pex-supply = <&vdd_1v05>;
-		avdd-pex-pll-supply = <&vdd_1v05>;
-		avdd-pll-erefe-supply = <&avdd_1v05>;
-		dvddio-pex-supply = <&vdd_1v05>;
-		hvdd-pex-pll-e-supply = <&reg_3v3>;
-		hvdd-pex-supply = <&reg_3v3>;
-		vddio-pex-ctl-supply = <&reg_3v3>;
+		avddio-pex-supply = <&reg_1v05_vdd>;
+		avdd-pex-pll-supply = <&reg_1v05_vdd>;
+		avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+		dvddio-pex-supply = <&reg_1v05_vdd>;
+		hvdd-pex-pll-e-supply = <&reg_module_3v3>;
+		hvdd-pex-supply = <&reg_module_3v3>;
+		vddio-pex-ctl-supply = <&reg_module_3v3>;
 
 		/* Apalis PCIe (additional lane Apalis type specific) */
 		pci@1,0 {
@@ -77,16 +74,21 @@
 			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
 			phy-names = "pcie-0";
 			status = "okay";
+
+			pcie@0 {
+				reg = <0 0 0 0 0>;
+				local-mac-address = [00 00 00 00 00 00];
+			};
 		};
 	};
 
 	host1x@50000000 {
 		hdmi@54280000 {
-			pll-supply = <&reg_1v05_avdd_hdmi_pll>;
-			vdd-supply = <&reg_3v3_avdd_hdmi>;
 			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
 			nvidia,hpd-gpio =
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			pll-supply = <&reg_1v05_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
 		};
 	};
 
@@ -95,44 +97,44 @@
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
 		 */
-		vdd-supply = <&vdd_gpu>;
+		vdd-supply = <&reg_vdd_gpu>;
 	};
 
-	pinmux: pinmux@70000868 {
+	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
 
 		state_default: pinmux {
 			/* Analogue Audio (On-module) */
-			dap3_fs_pp0 {
+			dap3-fs-pp0 {
 				nvidia,pins = "dap3_fs_pp0";
 				nvidia,function = "i2s2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap3_din_pp1 {
+			dap3-din-pp1 {
 				nvidia,pins = "dap3_din_pp1";
 				nvidia,function = "i2s2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			dap3_dout_pp2 {
+			dap3-dout-pp2 {
 				nvidia,pins = "dap3_dout_pp2";
 				nvidia,function = "i2s2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap3_sclk_pp3 {
+			dap3-sclk-pp3 {
 				nvidia,pins = "dap3_sclk_pp3";
 				nvidia,function = "i2s2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap_mclk1_pw4 {
+			dap-mclk1-pw4 {
 				nvidia,pins = "dap_mclk1_pw4";
 				nvidia,function = "extperiph1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -159,7 +161,7 @@
 			};
 
 			/* Apalis CAM1_MCLK */
-			cam_mclk_pcc0 {
+			cam-mclk-pcc0 {
 				nvidia,pins = "cam_mclk_pcc0";
 				nvidia,function = "vi_alt3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -168,28 +170,28 @@
 			};
 
 			/* Apalis Digital Audio */
-			dap2_fs_pa2 {
+			dap2-fs-pa2 {
 				nvidia,pins = "dap2_fs_pa2";
 				nvidia,function = "hda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			dap2_sclk_pa3 {
+			dap2-sclk-pa3 {
 				nvidia,pins = "dap2_sclk_pa3";
 				nvidia,function = "hda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			dap2_din_pa4 {
+			dap2-din-pa4 {
 				nvidia,pins = "dap2_din_pa4";
 				nvidia,function = "hda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			dap2_dout_pa5 {
+			dap2-dout-pa5 {
 				nvidia,pins = "dap2_dout_pa5";
 				nvidia,function = "hda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -202,7 +204,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			clk3_out_pee0 {
+			clk3-out-pee0 {
 				nvidia,pins = "clk3_out_pee0";
 				nvidia,function = "extperiph3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -211,49 +213,49 @@
 			};
 
 			/* Apalis GPIO */
-			ddc_scl_pv4 {
+			ddc-scl-pv4 {
 				nvidia,pins = "ddc_scl_pv4";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			ddc_sda_pv5 {
+			ddc-sda-pv5 {
 				nvidia,pins = "ddc_sda_pv5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			pex_l0_rst_n_pdd1 {
+			pex-l0-rst-n-pdd1 {
 				nvidia,pins = "pex_l0_rst_n_pdd1";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			pex_l0_clkreq_n_pdd2 {
+			pex-l0-clkreq-n-pdd2 {
 				nvidia,pins = "pex_l0_clkreq_n_pdd2";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			pex_l1_rst_n_pdd5 {
+			pex-l1-rst-n-pdd5 {
 				nvidia,pins = "pex_l1_rst_n_pdd5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			pex_l1_clkreq_n_pdd6 {
+			pex-l1-clkreq-n-pdd6 {
 				nvidia,pins = "pex_l1_clkreq_n_pdd6";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			dp_hpd_pff0 {
+			dp-hpd-pff0 {
 				nvidia,pins = "dp_hpd_pff0";
 				nvidia,function = "dp";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -277,7 +279,7 @@
 			};
 
 			/* Apalis HDMI1_CEC */
-			hdmi_cec_pee3 {
+			hdmi-cec-pee3 {
 				nvidia,pins = "hdmi_cec_pee3";
 				nvidia,function = "cec";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -287,7 +289,7 @@
 			};
 
 			/* Apalis HDMI1_HPD */
-			hdmi_int_pn7 {
+			hdmi-int-pn7 {
 				nvidia,pins = "hdmi_int_pn7";
 				nvidia,function = "rsvd1";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -297,7 +299,7 @@
 			};
 
 			/* Apalis I2C1 */
-			gen1_i2c_scl_pc4 {
+			gen1-i2c-scl-pc4 {
 				nvidia,pins = "gen1_i2c_scl_pc4";
 				nvidia,function = "i2c1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -305,7 +307,7 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
 			};
-			gen1_i2c_sda_pc5 {
+			gen1-i2c-sda-pc5 {
 				nvidia,pins = "gen1_i2c_sda_pc5";
 				nvidia,function = "i2c1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -315,7 +317,7 @@
 			};
 
 			/* Apalis I2C2 (DDC) */
-			gen2_i2c_scl_pt5 {
+			gen2-i2c-scl-pt5 {
 				nvidia,pins = "gen2_i2c_scl_pt5";
 				nvidia,function = "i2c2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -323,7 +325,7 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
 			};
-			gen2_i2c_sda_pt6 {
+			gen2-i2c-sda-pt6 {
 				nvidia,pins = "gen2_i2c_sda_pt6";
 				nvidia,function = "i2c2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -333,7 +335,7 @@
 			};
 
 			/* Apalis I2C3 (CAM) */
-			cam_i2c_scl_pbb1 {
+			cam-i2c-scl-pbb1 {
 				nvidia,pins = "cam_i2c_scl_pbb1";
 				nvidia,function = "i2c3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -341,7 +343,7 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
 			};
-			cam_i2c_sda_pbb2 {
+			cam-i2c-sda-pbb2 {
 				nvidia,pins = "cam_i2c_sda_pbb2";
 				nvidia,function = "i2c3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -351,77 +353,77 @@
 			};
 
 			/* Apalis MMC1 */
-			sdmmc1_cd_n_pv3 { /* CD# GPIO */
+			sdmmc1-cd-n-pv3 { /* CD# GPIO */
 				nvidia,pins = "sdmmc1_wp_n_pv3";
 				nvidia,function = "sdmmc1";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			clk2_out_pw5 { /* D5 GPIO */
+			clk2-out-pw5 { /* D5 GPIO */
 				nvidia,pins = "clk2_out_pw5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc1_dat3_py4 {
+			sdmmc1-dat3-py4 {
 				nvidia,pins = "sdmmc1_dat3_py4";
 				nvidia,function = "sdmmc1";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc1_dat2_py5 {
+			sdmmc1-dat2-py5 {
 				nvidia,pins = "sdmmc1_dat2_py5";
 				nvidia,function = "sdmmc1";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc1_dat1_py6 {
+			sdmmc1-dat1-py6 {
 				nvidia,pins = "sdmmc1_dat1_py6";
 				nvidia,function = "sdmmc1";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc1_dat0_py7 {
+			sdmmc1-dat0-py7 {
 				nvidia,pins = "sdmmc1_dat0_py7";
 				nvidia,function = "sdmmc1";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc1_clk_pz0 {
+			sdmmc1-clk-pz0 {
 				nvidia,pins = "sdmmc1_clk_pz0";
 				nvidia,function = "sdmmc1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc1_cmd_pz1 {
+			sdmmc1-cmd-pz1 {
 				nvidia,pins = "sdmmc1_cmd_pz1";
 				nvidia,function = "sdmmc1";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			clk2_req_pcc5 { /* D4 GPIO */
+			clk2-req-pcc5 { /* D4 GPIO */
 				nvidia,pins = "clk2_req_pcc5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */
+			sdmmc3-clk-lb-in-pee5 { /* D6 GPIO */
 				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			usb_vbus_en2_pff1 { /* D7 GPIO */
+			usb-vbus-en2-pff1 { /* D7 GPIO */
 				nvidia,pins = "usb_vbus_en2_pff1";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -461,7 +463,7 @@
 			};
 
 			/* Apalis SATA1_ACT# */
-			dap1_dout_pn2 {
+			dap1-dout-pn2 {
 				nvidia,pins = "dap1_dout_pn2";
 				nvidia,function = "gmi";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -470,49 +472,49 @@
 			};
 
 			/* Apalis SD1 */
-			sdmmc3_clk_pa6 {
+			sdmmc3-clk-pa6 {
 				nvidia,pins = "sdmmc3_clk_pa6";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc3_cmd_pa7 {
+			sdmmc3-cmd-pa7 {
 				nvidia,pins = "sdmmc3_cmd_pa7";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc3_dat3_pb4 {
+			sdmmc3-dat3-pb4 {
 				nvidia,pins = "sdmmc3_dat3_pb4";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc3_dat2_pb5 {
+			sdmmc3-dat2-pb5 {
 				nvidia,pins = "sdmmc3_dat2_pb5";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc3_dat1_pb6 {
+			sdmmc3-dat1-pb6 {
 				nvidia,pins = "sdmmc3_dat1_pb6";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc3_dat0_pb7 {
+			sdmmc3-dat0-pb7 {
 				nvidia,pins = "sdmmc3_dat0_pb7";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc3_cd_n_pv2 { /* CD# GPIO */
+			sdmmc3-cd-n-pv2 { /* CD# GPIO */
 				nvidia,pins = "sdmmc3_cd_n_pv2";
 				nvidia,function = "rsvd3";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -521,14 +523,14 @@
 			};
 
 			/* Apalis SPDIF */
-			spdif_out_pk5 {
+			spdif-out-pk5 {
 				nvidia,pins = "spdif_out_pk5";
 				nvidia,function = "spdif";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			spdif_in_pk6 {
+			spdif-in-pk6 {
 				nvidia,pins = "spdif_in_pk6";
 				nvidia,function = "spdif";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -537,28 +539,28 @@
 			};
 
 			/* Apalis SPI1 */
-			ulpi_clk_py0 {
+			ulpi-clk-py0 {
 				nvidia,pins = "ulpi_clk_py0";
 				nvidia,function = "spi1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			ulpi_dir_py1 {
+			ulpi-dir-py1 {
 				nvidia,pins = "ulpi_dir_py1";
 				nvidia,function = "spi1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			ulpi_nxt_py2 {
+			ulpi-nxt-py2 {
 				nvidia,pins = "ulpi_nxt_py2";
 				nvidia,function = "spi1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			ulpi_stp_py3 {
+			ulpi-stp-py3 {
 				nvidia,pins = "ulpi_stp_py3";
 				nvidia,function = "spi1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -611,42 +613,42 @@
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			uart1_txd_pu0 {
+			uart1-txd-pu0 {
 				nvidia,pins = "pu0";
 				nvidia,function = "uarta";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			uart1_rxd_pu1 {
+			uart1-rxd-pu1 {
 				nvidia,pins = "pu1";
 				nvidia,function = "uarta";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			uart1_cts_n_pu2 {
+			uart1-cts-n-pu2 {
 				nvidia,pins = "pu2";
 				nvidia,function = "uarta";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			uart1_rts_n_pu3 {
+			uart1-rts-n-pu3 {
 				nvidia,pins = "pu3";
 				nvidia,function = "uarta";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			uart3_cts_n_pa1 { /* DSR GPIO */
+			uart3-cts-n-pa1 { /* DSR GPIO */
 				nvidia,pins = "uart3_cts_n_pa1";
 				nvidia,function = "gmi";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			uart3_rts_n_pc0 { /* DTR GPIO */
+			uart3-rts-n-pc0 { /* DTR GPIO */
 				nvidia,pins = "uart3_rts_n_pc0";
 				nvidia,function = "gmi";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -655,28 +657,28 @@
 			};
 
 			/* Apalis UART2 */
-			uart2_txd_pc2 {
+			uart2-txd-pc2 {
 				nvidia,pins = "uart2_txd_pc2";
 				nvidia,function = "irda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			uart2_rxd_pc3 {
+			uart2-rxd-pc3 {
 				nvidia,pins = "uart2_rxd_pc3";
 				nvidia,function = "irda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			uart2_cts_n_pj5 {
+			uart2-cts-n-pj5 {
 				nvidia,pins = "uart2_cts_n_pj5";
 				nvidia,function = "uartb";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			uart2_rts_n_pj6 {
+			uart2-rts-n-pj6 {
 				nvidia,pins = "uart2_rts_n_pj6";
 				nvidia,function = "uartb";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -685,14 +687,14 @@
 			};
 
 			/* Apalis UART3 */
-			uart3_txd_pw6 {
+			uart3-txd-pw6 {
 				nvidia,pins = "uart3_txd_pw6";
 				nvidia,function = "uartc";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			uart3_rxd_pw7 {
+			uart3-rxd-pw7 {
 				nvidia,pins = "uart3_rxd_pw7";
 				nvidia,function = "uartc";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -701,14 +703,14 @@
 			};
 
 			/* Apalis UART4 */
-			uart4_rxd_pb0 {
+			uart4-rxd-pb0 {
 				nvidia,pins = "pb0";
 				nvidia,function = "uartd";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			uart4_txd_pj7 {
+			uart4-txd-pj7 {
 				nvidia,pins = "pj7";
 				nvidia,function = "uartd";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -717,7 +719,7 @@
 			};
 
 			/* Apalis USBH_EN */
-			usb_vbus_en1_pn5 {
+			usb-vbus-en1-pn5 {
 				nvidia,pins = "usb_vbus_en1_pn5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -736,7 +738,7 @@
 			};
 
 			/* Apalis USBO1_EN */
-			usb_vbus_en0_pn4 {
+			usb-vbus-en0-pn4 {
 				nvidia,pins = "usb_vbus_en0_pn4";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -755,7 +757,7 @@
 			};
 
 			/* Apalis WAKE1_MICO */
-			pex_wake_n_pdd3 {
+			pex-wake-n-pdd3 {
 				nvidia,pins = "pex_wake_n_pdd3";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -764,7 +766,7 @@
 			};
 
 			/* CORE_PWR_REQ */
-			core_pwr_req {
+			core-pwr-req {
 				nvidia,pins = "core_pwr_req";
 				nvidia,function = "pwron";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -773,7 +775,7 @@
 			};
 
 			/* CPU_PWR_REQ */
-			cpu_pwr_req {
+			cpu-pwr-req {
 				nvidia,pins = "cpu_pwr_req";
 				nvidia,function = "cpu";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -782,14 +784,14 @@
 			};
 
 			/* DVFS */
-			dvfs_pwm_px0 {
+			dvfs-pwm-px0 {
 				nvidia,pins = "dvfs_pwm_px0";
 				nvidia,function = "cldvfs";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dvfs_clk_px2 {
+			dvfs-clk-px2 {
 				nvidia,pins = "dvfs_clk_px2";
 				nvidia,function = "cldvfs";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -798,70 +800,70 @@
 			};
 
 			/* eMMC */
-			sdmmc4_dat0_paa0 {
+			sdmmc4-dat0-paa0 {
 				nvidia,pins = "sdmmc4_dat0_paa0";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_dat1_paa1 {
+			sdmmc4-dat1-paa1 {
 				nvidia,pins = "sdmmc4_dat1_paa1";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_dat2_paa2 {
+			sdmmc4-dat2-paa2 {
 				nvidia,pins = "sdmmc4_dat2_paa2";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_dat3_paa3 {
+			sdmmc4-dat3-paa3 {
 				nvidia,pins = "sdmmc4_dat3_paa3";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_dat4_paa4 {
+			sdmmc4-dat4-paa4 {
 				nvidia,pins = "sdmmc4_dat4_paa4";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_dat5_paa5 {
+			sdmmc4-dat5-paa5 {
 				nvidia,pins = "sdmmc4_dat5_paa5";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_dat6_paa6 {
+			sdmmc4-dat6-paa6 {
 				nvidia,pins = "sdmmc4_dat6_paa6";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_dat7_paa7 {
+			sdmmc4-dat7-paa7 {
 				nvidia,pins = "sdmmc4_dat7_paa7";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_clk_pcc4 {
+			sdmmc4-clk-pcc4 {
 				nvidia,pins = "sdmmc4_clk_pcc4";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_cmd_pt7 {
+			sdmmc4-cmd-pt7 {
 				nvidia,pins = "sdmmc4_cmd_pt7";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -870,7 +872,7 @@
 			};
 
 			/* JTAG_RTCK */
-			jtag_rtck {
+			jtag-rtck {
 				nvidia,pins = "jtag_rtck";
 				nvidia,function = "rtck";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -879,7 +881,7 @@
 			};
 
 			/* LAN_DEV_OFF# */
-			ulpi_data5_po6 {
+			ulpi-data5-po6 {
 				nvidia,pins = "ulpi_data5_po6";
 				nvidia,function = "ulpi";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -888,7 +890,7 @@
 			};
 
 			/* LAN_RESET# */
-			kb_row10_ps2 {
+			kb-row10-ps2 {
 				nvidia,pins = "kb_row10_ps2";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -897,7 +899,7 @@
 			};
 
 			/* LAN_WAKE# */
-			ulpi_data4_po5 {
+			ulpi-data4-po5 {
 				nvidia,pins = "ulpi_data4_po5";
 				nvidia,function = "ulpi";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -951,35 +953,35 @@
 			};
 
 			/* MCU SPI */
-			gpio_x4_aud_px4 {
+			gpio-x4-aud-px4 {
 				nvidia,pins = "gpio_x4_aud_px4";
 				nvidia,function = "spi2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			gpio_x5_aud_px5 {
+			gpio-x5-aud-px5 {
 				nvidia,pins = "gpio_x5_aud_px5";
 				nvidia,function = "spi2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			gpio_x6_aud_px6 { /* MCU_CS */
+			gpio-x6-aud-px6 { /* MCU_CS */
 				nvidia,pins = "gpio_x6_aud_px6";
 				nvidia,function = "spi2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			gpio_x7_aud_px7 {
+			gpio-x7-aud-px7 {
 				nvidia,pins = "gpio_x7_aud_px7";
 				nvidia,function = "spi2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			gpio_w2_aud_pw2 { /* MCU_CSEZP */
+			gpio-w2-aud-pw2 { /* MCU_CSEZP */
 				nvidia,pins = "gpio_w2_aud_pw2";
 				nvidia,function = "spi2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -988,7 +990,7 @@
 			};
 
 			/* PMIC_CLK_32K */
-			clk_32k_in {
+			clk-32k-in {
 				nvidia,pins = "clk_32k_in";
 				nvidia,function = "clk";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -997,7 +999,7 @@
 			};
 
 			/* PMIC_CPU_OC_INT */
-			clk_32k_out_pa0 {
+			clk-32k-out-pa0 {
 				nvidia,pins = "clk_32k_out_pa0";
 				nvidia,function = "soc";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1006,7 +1008,7 @@
 			};
 
 			/* PWR_I2C */
-			pwr_i2c_scl_pz6 {
+			pwr-i2c-scl-pz6 {
 				nvidia,pins = "pwr_i2c_scl_pz6";
 				nvidia,function = "i2cpwr";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1014,7 +1016,7 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
 			};
-			pwr_i2c_sda_pz7 {
+			pwr-i2c-sda-pz7 {
 				nvidia,pins = "pwr_i2c_sda_pz7";
 				nvidia,function = "i2cpwr";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1024,7 +1026,7 @@
 			};
 
 			/* PWR_INT_N */
-			pwr_int_n {
+			pwr-int-n {
 				nvidia,pins = "pwr_int_n";
 				nvidia,function = "pmi";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -1042,7 +1044,7 @@
 			};
 
 			/* RESET_OUT_N */
-			reset_out_n {
+			reset-out-n {
 				nvidia,pins = "reset_out_n";
 				nvidia,function = "reset_out_n";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1051,14 +1053,14 @@
 			};
 
 			/* SHIFT_CTRL_DIR_IN */
-			kb_row0_pr0 {
+			kb-row0-pr0 {
 				nvidia,pins = "kb_row0_pr0";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row1_pr1 {
+			kb-row1-pr1 {
 				nvidia,pins = "kb_row1_pr1";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1067,7 +1069,7 @@
 			};
 
 			/* Configure level-shifter as output for HDA */
-			kb_row11_ps3 {
+			kb-row11-ps3 {
 				nvidia,pins = "kb_row11_ps3";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -1076,21 +1078,21 @@
 			};
 
 			/* SHIFT_CTRL_DIR_OUT */
-			kb_col5_pq5 {
+			kb-col5-pq5 {
 				nvidia,pins = "kb_col5_pq5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_col6_pq6 {
+			kb-col6-pq6 {
 				nvidia,pins = "kb_col6_pq6";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_col7_pq7 {
+			kb-col7-pq7 {
 				nvidia,pins = "kb_col7_pq7";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -1099,35 +1101,35 @@
 			};
 
 			/* SHIFT_CTRL_OE */
-			kb_col0_pq0 {
+			kb-col0-pq0 {
 				nvidia,pins = "kb_col0_pq0";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_col1_pq1 {
+			kb-col1-pq1 {
 				nvidia,pins = "kb_col1_pq1";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_col2_pq2 {
+			kb-col2-pq2 {
 				nvidia,pins = "kb_col2_pq2";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_col4_pq4 {
+			kb-col4-pq4 {
 				nvidia,pins = "kb_col4_pq4";
 				nvidia,function = "kbc";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row2_pr2 {
+			kb-row2-pr2 {
 				nvidia,pins = "kb_row2_pr2";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1145,7 +1147,7 @@
 			};
 
 			/* TOUCH_INT */
-			gpio_w3_aud_pw3 {
+			gpio-w3-aud-pw3 {
 				nvidia,pins = "gpio_w3_aud_pw3";
 				nvidia,function = "spi6";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1286,189 +1288,189 @@
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap1_fs_pn0 { /* NC */
+			dap1-fs-pn0 { /* NC */
 				nvidia,pins = "dap1_fs_pn0";
 				nvidia,function = "rsvd4";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap1_din_pn1 { /* NC */
+			dap1-din-pn1 { /* NC */
 				nvidia,pins = "dap1_din_pn1";
 				nvidia,function = "rsvd4";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap1_sclk_pn3 { /* NC */
+			dap1-sclk-pn3 { /* NC */
 				nvidia,pins = "dap1_sclk_pn3";
 				nvidia,function = "rsvd4";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			ulpi_data7_po0 { /* NC */
+			ulpi-data7-po0 { /* NC */
 				nvidia,pins = "ulpi_data7_po0";
 				nvidia,function = "ulpi";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			ulpi_data0_po1 { /* NC */
+			ulpi-data0-po1 { /* NC */
 				nvidia,pins = "ulpi_data0_po1";
 				nvidia,function = "ulpi";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			ulpi_data1_po2 { /* NC */
+			ulpi-data1-po2 { /* NC */
 				nvidia,pins = "ulpi_data1_po2";
 				nvidia,function = "ulpi";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			ulpi_data2_po3 { /* NC */
+			ulpi-data2-po3 { /* NC */
 				nvidia,pins = "ulpi_data2_po3";
 				nvidia,function = "ulpi";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			ulpi_data3_po4 { /* NC */
+			ulpi-data3-po4 { /* NC */
 				nvidia,pins = "ulpi_data3_po4";
 				nvidia,function = "ulpi";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			ulpi_data6_po7 { /* NC */
+			ulpi-data6-po7 { /* NC */
 				nvidia,pins = "ulpi_data6_po7";
 				nvidia,function = "ulpi";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap4_fs_pp4 { /* NC */
+			dap4-fs-pp4 { /* NC */
 				nvidia,pins = "dap4_fs_pp4";
 				nvidia,function = "rsvd4";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap4_din_pp5 { /* NC */
+			dap4-din-pp5 { /* NC */
 				nvidia,pins = "dap4_din_pp5";
 				nvidia,function = "rsvd3";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap4_dout_pp6 { /* NC */
+			dap4-dout-pp6 { /* NC */
 				nvidia,pins = "dap4_dout_pp6";
 				nvidia,function = "rsvd4";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap4_sclk_pp7 { /* NC */
+			dap4-sclk-pp7 { /* NC */
 				nvidia,pins = "dap4_sclk_pp7";
 				nvidia,function = "rsvd3";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_col3_pq3 { /* NC */
+			kb-col3-pq3 { /* NC */
 				nvidia,pins = "kb_col3_pq3";
 				nvidia,function = "kbc";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row3_pr3 { /* NC */
+			kb-row3-pr3 { /* NC */
 				nvidia,pins = "kb_row3_pr3";
 				nvidia,function = "kbc";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row4_pr4 { /* NC */
+			kb-row4-pr4 { /* NC */
 				nvidia,pins = "kb_row4_pr4";
 				nvidia,function = "rsvd3";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row5_pr5 { /* NC */
+			kb-row5-pr5 { /* NC */
 				nvidia,pins = "kb_row5_pr5";
 				nvidia,function = "rsvd3";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row6_pr6 { /* NC */
+			kb-row6-pr6 { /* NC */
 				nvidia,pins = "kb_row6_pr6";
 				nvidia,function = "kbc";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row7_pr7 { /* NC */
+			kb-row7-pr7 { /* NC */
 				nvidia,pins = "kb_row7_pr7";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row8_ps0 { /* NC */
+			kb-row8-ps0 { /* NC */
 				nvidia,pins = "kb_row8_ps0";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row9_ps1 { /* NC */
+			kb-row9-ps1 { /* NC */
 				nvidia,pins = "kb_row9_ps1";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row12_ps4 { /* NC */
+			kb-row12-ps4 { /* NC */
 				nvidia,pins = "kb_row12_ps4";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row13_ps5 { /* NC */
+			kb-row13-ps5 { /* NC */
 				nvidia,pins = "kb_row13_ps5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row14_ps6 { /* NC */
+			kb-row14-ps6 { /* NC */
 				nvidia,pins = "kb_row14_ps6";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row15_ps7 { /* NC */
+			kb-row15-ps7 { /* NC */
 				nvidia,pins = "kb_row15_ps7";
 				nvidia,function = "rsvd3";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row16_pt0 { /* NC */
+			kb-row16-pt0 { /* NC */
 				nvidia,pins = "kb_row16_pt0";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row17_pt1 { /* NC */
+			kb-row17-pt1 { /* NC */
 				nvidia,pins = "kb_row17_pt1";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1496,14 +1498,14 @@
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			gpio_x1_aud_px1 { /* NC */
+			gpio-x1-aud-px1 { /* NC */
 				nvidia,pins = "gpio_x1_aud_px1";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			gpio_x3_aud_px3 { /* NC */
+			gpio-x3-aud-px3 { /* NC */
 				nvidia,pins = "gpio_x3_aud_px3";
 				nvidia,function = "rsvd4";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1531,14 +1533,14 @@
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			clk3_req_pee1 { /* NC */
+			clk3-req-pee1 { /* NC */
 				nvidia,pins = "clk3_req_pee1";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap_mclk1_req_pee2 { /* NC */
+			dap-mclk1-req-pee2 { /* NC */
 				nvidia,pins = "dap_mclk1_req_pee2";
 				nvidia,function = "rsvd4";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
@@ -1554,7 +1556,7 @@
 			 * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
 			 * bits being set to 0xfffd according to the TRM!
 			 */
-			sdmmc3_clk_lb_out_pee4 { /* NC */
+			sdmmc3-clk-lb-out-pee4 { /* NC */
 				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1589,8 +1591,9 @@
 		sgtl5000: codec@a {
 			compatible = "fsl,sgtl5000";
 			reg = <0x0a>;
-			VDDA-supply = <&reg_3v3>;
-			VDDIO-supply = <&vddio_1v8>;
+			VDDA-supply = <&reg_module_3v3_audio>;
+			VDDD-supply = <&reg_1v8_vddio>;
+			VDDIO-supply = <&reg_1v8_vddio>;
 			clocks = <&tegra_car TEGRA124_CLK_EXTERN1>;
 		};
 
@@ -1607,14 +1610,14 @@
 			pinctrl-0 = <&as3722_default>;
 
 			as3722_default: pinmux {
-				gpio2_7 {
+				gpio2-7 {
 					pins = "gpio2", /* PWR_EN_+V3.3 */
 					       "gpio7"; /* +V1.6_LPO */
 					function = "gpio";
 					bias-pull-up;
 				};
 
-				gpio0_1_3_4_5_6 {
+				gpio0-1-3-4-5-6 {
 					pins = "gpio0", "gpio1", "gpio3",
 					       "gpio4", "gpio5", "gpio6";
 					bias-high-impedance;
@@ -1622,18 +1625,18 @@
 			};
 
 			regulators {
-				vsup-sd2-supply = <&reg_3v3>;
-				vsup-sd3-supply = <&reg_3v3>;
-				vsup-sd4-supply = <&reg_3v3>;
-				vsup-sd5-supply = <&reg_3v3>;
-				vin-ldo0-supply = <&vddio_ddr_1v35>;
-				vin-ldo1-6-supply = <&reg_3v3>;
-				vin-ldo2-5-7-supply = <&vddio_1v8>;
-				vin-ldo3-4-supply = <&reg_3v3>;
-				vin-ldo9-10-supply = <&reg_3v3>;
-				vin-ldo11-supply = <&reg_3v3>;
-
-				vdd_cpu: sd0 {
+				vsup-sd2-supply = <&reg_module_3v3>;
+				vsup-sd3-supply = <&reg_module_3v3>;
+				vsup-sd4-supply = <&reg_module_3v3>;
+				vsup-sd5-supply = <&reg_module_3v3>;
+				vin-ldo0-supply = <&reg_1v35_vddio_ddr>;
+				vin-ldo1-6-supply = <&reg_module_3v3>;
+				vin-ldo2-5-7-supply = <&reg_1v8_vddio>;
+				vin-ldo3-4-supply = <&reg_module_3v3>;
+				vin-ldo9-10-supply = <&reg_module_3v3>;
+				vin-ldo11-supply = <&reg_module_3v3>;
+
+				reg_vdd_cpu: sd0 {
 					regulator-name = "+VDD_CPU_AP";
 					regulator-min-microvolt = <700000>;
 					regulator-max-microvolt = <1400000>;
@@ -1655,7 +1658,7 @@
 					ams,ext-control = <1>;
 				};
 
-				vddio_ddr_1v35: sd2 {
+				reg_1v35_vddio_ddr: sd2 {
 					regulator-name =
 						"+V1.35_VDDIO_DDR(sd2)";
 					regulator-min-microvolt = <1350000>;
@@ -1673,13 +1676,13 @@
 					regulator-boot-on;
 				};
 
-				vdd_1v05: sd4 {
+				reg_1v05_vdd: sd4 {
 					regulator-name = "+V1.05";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
 				};
 
-				vddio_1v8: sd5 {
+				reg_1v8_vddio: sd5 {
 					regulator-name = "+V1.8";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -1687,7 +1690,7 @@
 					regulator-always-on;
 				};
 
-				vdd_gpu: sd6 {
+				reg_vdd_gpu: sd6 {
 					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
@@ -1697,7 +1700,7 @@
 					regulator-always-on;
 				};
 
-				avdd_1v05: ldo0 {
+				reg_1v05_avdd: ldo0 {
 					regulator-name = "+V1.05_AVDD";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
@@ -1772,12 +1775,13 @@
 		 * TMP451 temperature sensor
 		 * Note: THERM_N directly connected to AS3722 PMIC THERM
 		 */
-		temperature-sensor@4c {
+		temp-sensor@4c {
 			compatible = "ti,tmp451";
 			reg = <0x4c>;
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
 			#thermal-sensor-cells = <1>;
+			vcc-supply = <&reg_module_3v3>;
 		};
 	};
 
@@ -1809,9 +1813,9 @@
 	sata@70020000 {
 		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
 		phy-names = "sata-0";
-		avdd-supply = <&vdd_1v05>;
-		hvdd-supply = <&reg_3v3>;
-		vddio-supply = <&vdd_1v05>;
+		avdd-supply = <&reg_1v05_vdd>;
+		hvdd-supply = <&reg_module_3v3>;
+		vddio-supply = <&reg_1v05_vdd>;
 	};
 
 	usb@70090000 {
@@ -1822,14 +1826,14 @@
 		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
 		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
 		phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
-		avddio-pex-supply = <&vdd_1v05>;
-		avdd-pll-erefe-supply = <&avdd_1v05>;
-		avdd-pll-utmip-supply = <&vddio_1v8>;
-		avdd-usb-ss-pll-supply = <&vdd_1v05>;
-		avdd-usb-supply = <&reg_3v3>;
-		dvddio-pex-supply = <&vdd_1v05>;
-		hvdd-usb-ss-pll-e-supply = <&reg_3v3>;
-		hvdd-usb-ss-supply = <&reg_3v3>;
+		avddio-pex-supply = <&reg_1v05_vdd>;
+		avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+		avdd-pll-utmip-supply = <&reg_1v8_vddio>;
+		avdd-usb-ss-pll-supply = <&reg_1v05_vdd>;
+		avdd-usb-supply = <&reg_module_3v3>;
+		dvddio-pex-supply = <&reg_1v05_vdd>;
+		hvdd-usb-ss-pll-e-supply = <&reg_module_3v3>;
+		hvdd-usb-ss-supply = <&reg_module_3v3>;
 	};
 
 	padctl@7009f000 {
@@ -1839,18 +1843,18 @@
 
 				lanes {
 					usb2-0 {
-						nvidia,function = "xusb";
 						status = "okay";
+						nvidia,function = "xusb";
 					};
 
 					usb2-1 {
-						nvidia,function = "xusb";
 						status = "okay";
+						nvidia,function = "xusb";
 					};
 
 					usb2-2 {
-						nvidia,function = "xusb";
 						status = "okay";
+						nvidia,function = "xusb";
 					};
 				};
 			};
@@ -1860,28 +1864,28 @@
 
 				lanes {
 					pcie-0 {
-						nvidia,function = "usb3-ss";
 						status = "okay";
+						nvidia,function = "usb3-ss";
 					};
 
 					pcie-1 {
-						nvidia,function = "usb3-ss";
 						status = "okay";
+						nvidia,function = "usb3-ss";
 					};
 
 					pcie-2 {
-						nvidia,function = "pcie";
 						status = "okay";
+						nvidia,function = "pcie";
 					};
 
 					pcie-3 {
-						nvidia,function = "pcie";
 						status = "okay";
+						nvidia,function = "pcie";
 					};
 
 					pcie-4 {
-						nvidia,function = "pcie";
 						status = "okay";
+						nvidia,function = "pcie";
 					};
 				};
 			};
@@ -1891,8 +1895,8 @@
 
 				lanes {
 					sata-0 {
-						nvidia,function = "sata";
 						status = "okay";
+						nvidia,function = "sata";
 					};
 				};
 			};
@@ -1903,7 +1907,6 @@
 			usb2-0 {
 				status = "okay";
 				mode = "otg";
-
 				vbus-supply = <&reg_usbo1_vbus>;
 			};
 
@@ -1911,7 +1914,6 @@
 			usb2-1 {
 				status = "okay";
 				mode = "host";
-
 				vbus-supply = <&reg_usbh_vbus>;
 			};
 
@@ -1919,18 +1921,19 @@
 			usb2-2 {
 				status = "okay";
 				mode = "host";
-
 				vbus-supply = <&reg_usbh_vbus>;
 			};
 
 			usb3-0 {
-				nvidia,usb2-companion = <2>;
 				status = "okay";
+				nvidia,usb2-companion = <2>;
+				vbus-supply = <&reg_usbh_vbus>;
 			};
 
 			usb3-1 {
-				nvidia,usb2-companion = <0>;
 				status = "okay";
+				nvidia,usb2-companion = <0>;
+				vbus-supply = <&reg_usbo1_vbus>;
 			};
 		};
 	};
@@ -1940,13 +1943,16 @@
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
+		vmmc-supply = <&reg_module_3v3>; /* VCC */
+		vqmmc-supply = <&reg_1v8_vddio>; /* VCCQ */
+		mmc-ddr-1_8v;
 	};
 
 	/* CPU DFLL clock */
 	clock@70110000 {
 		status = "okay";
-		vdd-cpu-supply = <&vdd_cpu>;
 		nvidia,i2c-fs-rate = <400000>;
+		vdd-cpu-supply = <&reg_vdd_cpu>;
 	};
 
 	ahub@70300000 {
@@ -1955,22 +1961,15 @@
 		};
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
 	};
 
 	cpus {
 		cpu@0 {
-			vdd-cpu-supply = <&vdd_cpu>;
+			vdd-cpu-supply = <&reg_vdd_cpu>;
 		};
 	};
 
@@ -1980,7 +1979,7 @@
 		regulator-min-microvolt = <1050000>;
 		regulator-max-microvolt = <1050000>;
 		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
-		vin-supply = <&vdd_1v05>;
+		vin-supply = <&reg_1v05_vdd>;
 	};
 
 	reg_3v3_mxm: regulator-3v3-mxm {
@@ -1992,7 +1991,15 @@
 		regulator-boot-on;
 	};
 
-	reg_3v3: regulator-3v3 {
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_1v05_vdd>;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "+V3.3";
 		regulator-min-microvolt = <3300000>;
@@ -2005,12 +2012,12 @@
 		vin-supply = <&reg_3v3_mxm>;
 	};
 
-	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+	reg_module_3v3_audio: regulator-module-3v3-audio {
 		compatible = "regulator-fixed";
-		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-name = "+V3.3_AUDIO_AVDD_S";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vdd_1v05>;
+		regulator-always-on;
 	};
 
 	sound {
@@ -2064,7 +2071,7 @@
 
 &gpio {
 	/* I210 Gigabit Ethernet Controller Reset */
-	lan_reset_n {
+	lan-reset-n {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -2072,7 +2079,7 @@
 	};
 
 	/* Control MXM3 pin 26 Reset Module Output Carrier Input */
-	reset_moci_ctrl {
+	reset-moci-ctrl {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
new file mode 100644
index 000000000000..3c0f2681fcde
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri T20 on Colibri Evaluation Board";
+	compatible = "toradex,colibri_t20-eval-v3", "toradex,colibri_t20",
+		     "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@34";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartd;
+		serial2 = &uartb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+			hdmi-supply = <&reg_5v0>;
+		};
+	};
+
+	pinmux@70000014 {
+		state_default: pinmux {
+			bl-on {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			ddc {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			hotplug-detect {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			i2c {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			lm1 {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			mmc {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			mmccd {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwm-a-b {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwm-c-d {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			ssp {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart-a {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart-b {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart-c {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			usbh-pen {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	/* Colibri UART-A */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Colibri UART-C */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Colibri UART-B */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/* CAM_I2C (I2C3): unused */
+
+	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+	i2c@7000c400 {
+		status = "okay";
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
+	usb@c5000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbc_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* SPI4: Colibri SSP */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			/* CAN_INT */
+			interrupts = <TEGRA_GPIO(A, 0) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+			vdd-supply = <&reg_3v3>;
+			xceiver-supply = <&reg_5v0>;
+		};
+	};
+
+	/* SD/MMC */
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
+		no-1-8-v;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 128 64 32 16 8 4 0>;
+		default-brightness-level = <6>;
+		/* BL_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 0 5000000>; /* PWM<A> */
+	};
+
+	clk16m: osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "SODIMM pin 45 wakeup";
+			gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu", "simple-panel";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbc_vbus: regulator-usbc-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB5";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_PEN resp. USB_P_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts
index 57f16c0e9917..d8004d68efa0 100644
--- a/arch/arm/boot/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts
@@ -1,15 +1,21 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
 #include "tegra20-colibri.dtsi"
 
 / {
-	model = "Toradex Colibri T20 256/512 MB on Iris";
-	compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
+	model = "Toradex Colibri T20 on Iris";
+	compatible = "toradex,colibri_t20-iris", "toradex,colibri_t20",
+		     "nvidia,tegra20";
 
 	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@34";
+		rtc2 = "/rtc@7000e000";
 		serial0 = &uarta;
 		serial1 = &uartd;
+		serial2 = &uartb;
 	};
 
 	chosen {
@@ -17,90 +23,222 @@
 	};
 
 	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+
 		hdmi@54280000 {
 			status = "okay";
+			hdmi-supply = <&reg_5v0>;
 		};
 	};
 
 	pinmux@70000014 {
 		state_default: pinmux {
-			hdint {
+			bl-on {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			ddc {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			hotplug-detect {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			i2c {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			lm1 {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			mmc {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			mmccd {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwm-a-b {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwm-c-d {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			ssp {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			i2cddc {
+			uart-a {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			sdio4 {
+			uart-b {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			uarta {
+			uart-c {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			uartd {
+			usbh-pen {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 		};
 	};
 
+	/* Colibri UART-A */
 	serial@70006000 {
 		status = "okay";
 	};
 
+	/* Colibri UART-C */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Colibri UART-B */
 	serial@70006300 {
 		status = "okay";
 	};
 
-	i2c_ddc: i2c@7000c400 {
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/* CAM_I2C (I2C3): unused */
+
+	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+	i2c@7000c400 {
 		status = "okay";
 	};
 
+	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
 	usb@c5000000 {
 		status = "okay";
+		dr_mode = "otg";
 	};
 
 	usb-phy@c5000000 {
 		status = "okay";
+		vbus-supply = <&reg_usbc_vbus>;
 	};
 
+	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
 	usb@c5008000 {
 		status = "okay";
 	};
 
 	usb-phy@c5008000 {
 		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* SPI4: Colibri SSP */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
 	};
 
+	/* SD/MMC */
 	sdhci@c8000600 {
 		status = "okay";
 		bus-width = <4>;
-		vmmc-supply = <&vcc_sd_reg>;
-		vqmmc-supply = <&vcc_sd_reg>;
-	};
-
-	regulators {
-		regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_host_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			regulator-always-on;
-			gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
-		};
+		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
+		no-1-8-v;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 128 64 32 16 8 4 0>;
+		default-brightness-level = <6>;
+		/* BL_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 0 5000000>; /* PWM<A> */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
 
-		vcc_sd_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vcc_sd";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
+		wakeup {
+			label = "SODIMM pin 45 wakeup";
+			gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
 		};
 	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu", "simple-panel";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbc_vbus: regulator-usbc-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_PEN resp. USB_P_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi
index e7b9ab09908a..6162d193e12c 100644
--- a/arch/arm/boot/dts/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri.dtsi
@@ -1,15 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "tegra20.dtsi"
 
+/*
+ * Toradex Colibri T20 Module Device Tree
+ * Compatible for Revisions Colibri T20 256MB V1.1B, V1.2A;
+ * Colibri T20 256MB IT V1.2A; Colibri T20 512MB V1.1C, V1.2A;
+ * Colibri T20 512MB IT V1.2A
+ */
 / {
-	model = "Toradex Colibri T20 256/512 MB";
-	compatible = "toradex,colibri_t20-512", "nvidia,tegra20";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps6586x@34";
-		rtc1 = "/rtc@7000e000";
-	};
-
 	memory@0 {
 		/*
 		 * Set memory to 256 MB to be safe as this could be used on
@@ -21,12 +19,11 @@
 
 	host1x@50000000 {
 		hdmi@54280000 {
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-
-			nvidia,ddc-i2c-bus = <&i2c_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			pll-supply = <&reg_1v8_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
 		};
 	};
 
@@ -35,187 +32,406 @@
 		pinctrl-0 = <&state_default>;
 
 		state_default: pinmux {
-			audio_refclk {
+			/* Analogue Audio AC97 to WM9712 (On-module) */
+			audio-refclk {
 				nvidia,pins = "cdev1";
 				nvidia,function = "plla_out";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
-			crt {
-				nvidia,pins = "crtp";
-				nvidia,function = "crt";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
 			dap3 {
 				nvidia,pins = "dap3";
 				nvidia,function = "dap3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
-			displaya {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3",
-					"ld4", "ld5", "ld6", "ld7", "ld8",
-					"ld9", "ld10", "ld11", "ld12", "ld13",
-					"ld14", "ld15", "ld16", "ld17",
-					"lhs", "lpw0", "lpw2", "lsc0",
-					"lsc1", "lsck", "lsda", "lspi", "lvs";
-				nvidia,function = "displaya";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_dte {
-				nvidia,pins = "dte";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_gmi {
-				nvidia,pins = "ata", "atc", "atd", "ate",
-					"dap1", "dap2", "dap4", "gpu", "irrx",
-					"irtx", "spia", "spib", "spic";
-				nvidia,function = "gmi";
+
+			/*
+			 * AC97_RESET, ULPI_RESET, AC97_INT aka WM9712 GENIRQ
+			 * (All on-module), SODIMM Pin 45 Wakeup
+			 */
+			gpio-uac {
+				nvidia,pins = "uac";
+				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
-			gpio_pta {
+
+			/*
+			 * Buffer Enables for nPWE and RDnWR (On-module,
+			 * see GPIO hogging further down below)
+			 */
+			gpio-pta {
 				nvidia,pins = "pta";
 				nvidia,function = "rsvd4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
-			gpio_uac {
-				nvidia,pins = "uac";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+
+			/*
+			 * CLK_32K_OUT, CORE_PWR_REQ, CPU_PWR_REQ, PWR_INT_N,
+			 * SYS_CLK_REQ (All on-module)
+			 */
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
-			hdint {
-				nvidia,pins = "hdint";
+
+			/*
+			 * Colibri Address/Data Bus (GMI)
+			 * Note: spid and spie optionally used for SPI1
+			 */
+			gmi {
+				nvidia,pins = "atc", "atd", "ate", "dap1",
+					      "dap2", "dap4", "gmd", "gpu",
+					      "irrx", "irtx", "spia", "spib",
+					      "spic", "spid", "spie", "uca",
+					      "ucb";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			/* Further pins may be used as GPIOs */
+			gmi-gpio1 {
+				nvidia,pins = "lpw0", "lsc1", "lsck", "lsda";
 				nvidia,function = "hdmi";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			i2c1 {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			gmi-gpio2 {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lsdi";
+				nvidia,function = "rsvd4";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			i2c3 {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
+
+			/* Colibri BL_ON */
+			bl-on {
+				nvidia,pins = "dta";
+				nvidia,function = "rsvd1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			i2cddc {
+
+			/* Colibri Backlight PWM<A>, PWM<B> */
+			pwm-a-b {
+				nvidia,pins = "sdc";
+				nvidia,function = "pwm";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri DDC */
+			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
+
+			/*
+			 * Colibri EXT_IO*
+			 * Note: dtf optionally used for I2C3
+			 */
+			ext-io {
+				nvidia,pins = "dtf", "spdi";
+				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			irda {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
+
+			/*
+			 * Colibri Ethernet (On-module)
+			 * ULPI EHCI instance 1 USB2_DP/N -> AX88772B
+			 */
+			ulpi {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
-			nand {
-				nvidia,pins = "kbca", "kbcc", "kbcd",
-					"kbce", "kbcf";
-				nvidia,function = "nand";
+			ulpi-refclk {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
-			owc {
-				nvidia,pins = "owc";
-				nvidia,function = "owr";
+
+			/* Colibri HOTPLUG_DETECT (HDMI) */
+			hotplug-detect {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri I2C */
+			i2c {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+
+			/*
+			 * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
+			 * today's display need DE, disable LCD_M1
+			 */
+			lm1 {
+				nvidia,pins = "lm1";
+				nvidia,function = "rsvd3";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			pwm {
-				nvidia,pins = "sdb", "sdc", "sdd";
-				nvidia,function = "pwm";
+
+			/* Colibri LCD (L_* resp. LDD<*>) */
+			lcd {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3",
+					      "ld4", "ld5", "ld6", "ld7",
+					      "ld8", "ld9", "ld10", "ld11",
+					      "ld12", "ld13", "ld14", "ld15",
+					      "ld16", "ld17", "lhs", "lsc0",
+					      "lspi", "lvs";
+				nvidia,function = "displaya";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			sdio4 {
-				nvidia,pins = "atb", "gma", "gme";
+			/* Colibri LCD (Optional 24 BPP Support) */
+			lcd-24 {
+				nvidia,pins = "ldi", "lhp0", "lhp1", "lhp2",
+					      "lpp", "lvp1";
+				nvidia,function = "displaya";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri MMC */
+			mmc {
+				nvidia,pins = "atb", "gma";
 				nvidia,function = "sdio4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			spi1 {
-				nvidia,pins = "spid", "spie", "spif";
-				nvidia,function = "spi1";
+
+			/* Colibri MMCCD */
+			mmccd {
+				nvidia,pins = "gmb";
+				nvidia,function = "gmi_int";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			spi4 {
+
+			/* Colibri MMC (Optional 8-bit) */
+			mmc-8bit {
+				nvidia,pins = "gme";
+				nvidia,function = "sdio4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * Colibri Parallel Camera (Optional)
+			 * pins multiplexed with others and therefore disabled
+			 * Note: dta used for BL_ON by default
+			 */
+			cif-mclk {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			cif {
+				nvidia,pins = "dtb", "dtc", "dtd";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri PWM<C>, PWM<D> */
+			pwm-c-d {
+				nvidia,pins = "sdb", "sdd";
+				nvidia,function = "pwm";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri SSP */
+			ssp {
 				nvidia,pins = "slxa", "slxc", "slxd", "slxk";
 				nvidia,function = "spi4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			uarta {
+
+			/* Colibri UART-A */
+			uart-a {
 				nvidia,pins = "sdio1";
 				nvidia,function = "uarta";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			uartd {
+			uart-a-dsr {
+				nvidia,pins = "lpw1";
+				nvidia,function = "rsvd3";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			uart-a-dcd {
+				nvidia,pins = "lpw2";
+				nvidia,function = "hdmi";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri UART-B */
+			uart-b {
 				nvidia,pins = "gmc";
 				nvidia,function = "uartd";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			ulpi {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
+
+			/* Colibri UART-C */
+			uart-c {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri USB_CDET */
+			usb-cdet {
+				nvidia,pins = "spdo";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri USBH_OC */
+			usbh-oc {
+				nvidia,pins = "spih";
+				nvidia,function = "spi2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri USBH_PEN */
+			usbh-pen {
+				nvidia,pins = "spig";
+				nvidia,function = "spi2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri VGA not supported */
+			vga {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C3 (Optional) */
+			i2c3 {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* JTAG_RTCK */
+			jtag-rtck {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * LAN_RESET, LAN_EXT_WAKEUP and LAN_PME
+			 * (All On-module)
+			 */
+			gpio-gpv {
+				nvidia,pins = "gpv";
+				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
-			ulpi_refclk {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
+
+			/*
+			 * LAN_V_BUS, VDD_FAULT, BATT_FAULT, WM9712 PENDOWN
+			 * (All On-module); Colibri CAN_INT
+			 */
+			gpio-dte {
+				nvidia,pins = "dte";
+				nvidia,function = "rsvd1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
-			usb_gpio {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
+
+			/* NAND (On-module) */
+			nand {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					      "kbce", "kbcf";
+				nvidia,function = "nand";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
-			vi {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd";
-				nvidia,function = "vi";
+
+			/* Onewire (Optional) */
+			owr {
+				nvidia,pins = "owc";
+				nvidia,function = "owr";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			vi_sc {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
+
+			/* Power I2C (On-module) */
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* RESET_OUT */
+			reset-out {
+				nvidia,pins = "ata";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * SPI1 (Optional)
+			 * Note: spid and spie used for Colibri Address/Data
+			 *       Bus (GMI)
+			 */
+			spi1 {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
+
+			/*
+			 * THERMD_ALERT# (On-module), unlatched I2C address pin
+			 * of LM95245 temperature sensor therefore requires
+			 * disabling for now
+			 */
+			lvp0 {
+				nvidia,pins = "lvp0";
+				nvidia,function = "rsvd3";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
 		};
 	};
 
-	ac97: ac97@70002000 {
+	tegra_ac97: ac97@70002000 {
 		status = "okay";
-		nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
-			GPIO_ACTIVE_HIGH>;
-		nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0)
-			GPIO_ACTIVE_HIGH>;
+		nvidia,codec-reset-gpio =
+			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+		nvidia,codec-sync-gpio =
+			<&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra20-hsuart";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra20-hsuart";
 	};
 
 	nand-controller@70008000 {
@@ -243,7 +459,7 @@
 	};
 
 	/* DDC_SCL/SDA on X3 pin 15/16 (e.g. display EDID) */
-	i2c_ddc: i2c@7000c400 {
+	hdmi_ddc: i2c@7000c400 {
 		clock-frequency = <10000>;
 	};
 
@@ -256,59 +472,45 @@
 		status = "okay";
 		clock-frequency = <100000>;
 
-		pmic: tps6586x@34 {
+		pmic@34 {
 			compatible = "ti,tps6586x";
 			reg = <0x34>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
 			ti,system-power-controller;
-
 			#gpio-cells = <2>;
 			gpio-controller;
-
-			sys-supply = <&vdd_3v3_reg>;
-			vin-sm0-supply = <&sys_reg>;
-			vin-sm1-supply = <&sys_reg>;
-			vin-sm2-supply = <&sys_reg>;
-			vinldo01-supply = <&sm2_reg>;
-			vinldo23-supply = <&vdd_3v3_reg>;
-			vinldo4-supply = <&vdd_3v3_reg>;
-			vinldo678-supply = <&vdd_3v3_reg>;
-			vinldo9-supply = <&vdd_3v3_reg>;
+			sys-supply = <&reg_module_3v3>;
+			vin-sm0-supply = <&reg_3v3_vsys>;
+			vin-sm1-supply = <&reg_3v3_vsys>;
+			vin-sm2-supply = <&reg_3v3_vsys>;
+			vinldo01-supply = <&reg_1v8_vdd_ddr2>;
+			vinldo23-supply = <&reg_module_3v3>;
+			vinldo4-supply = <&reg_module_3v3>;
+			vinldo678-supply = <&reg_module_3v3>;
+			vinldo9-supply = <&reg_module_3v3>;
 
 			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				sys_reg: regulator@0 {
-					reg = <0>;
-					regulator-compatible = "sys";
-					regulator-name = "vdd_sys";
+				reg_3v3_vsys: sys {
+					regulator-name = "VSYS_3.3V";
 					regulator-always-on;
 				};
 
-				regulator@1 {
-					reg = <1>;
-					regulator-compatible = "sm0";
-					regulator-name = "vdd_sm0,vdd_core";
+				sm0 {
+					regulator-name = "VDD_CORE_1.2V";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 				};
 
-				regulator@2 {
-					reg = <2>;
-					regulator-compatible = "sm1";
-					regulator-name = "vdd_sm1,vdd_cpu";
+				sm1 {
+					regulator-name = "VDD_CPU_1.0V";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
 				};
 
-				sm2_reg: regulator@3 {
-					reg = <3>;
-					regulator-compatible = "sm2";
-					regulator-name = "vdd_sm2,vin_ldo*";
+				reg_1v8_vdd_ddr2: sm2 {
+					regulator-name = "VDD_DDR2_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
@@ -316,80 +518,68 @@
 
 				/* LDO0 is not connected to anything */
 
-				regulator@5 {
-					reg = <5>;
-					regulator-compatible = "ldo1";
-					regulator-name = "vdd_ldo1,avdd_pll*";
+				/*
+				 * +3.3V_ENABLE_N switching via FET:
+				 * AVDD_AUDIO_S and +3.3V
+				 * see also +3.3V fixed supply
+				 */
+				ldo1 {
+					regulator-name = "AVDD_PLL_1.1V";
 					regulator-min-microvolt = <1100000>;
 					regulator-max-microvolt = <1100000>;
 					regulator-always-on;
 				};
 
-				regulator@6 {
-					reg = <6>;
-					regulator-compatible = "ldo2";
-					regulator-name = "vdd_ldo2,vdd_rtc";
+				ldo2 {
+					regulator-name = "VDD_RTC_1.2V";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 				};
 
 				/* LDO3 is not connected to anything */
 
-				regulator@8 {
-					reg = <8>;
-					regulator-compatible = "ldo4";
-					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+				ldo4 {
+					regulator-name = "VDDIO_SYS_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 				};
 
-				ldo5_reg: regulator@9 {
-					reg = <9>;
-					regulator-compatible = "ldo5";
-					regulator-name = "vdd_ldo5,vdd_fuse";
+				/* Switched via FET from regular +3.3V */
+				ldo5 {
+					regulator-name = "+3.3V_USB";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 				};
 
-				regulator@10 {
-					reg = <10>;
-					regulator-compatible = "ldo6";
-					regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
+				ldo6 {
+					regulator-name = "AVDD_VDAC_2.85V";
 					regulator-min-microvolt = <2850000>;
 					regulator-max-microvolt = <2850000>;
 				};
 
-				hdmi_vdd_reg: regulator@11 {
-					reg = <11>;
-					regulator-compatible = "ldo7";
-					regulator-name = "vdd_ldo7,avdd_hdmi";
+				reg_3v3_avdd_hdmi: ldo7 {
+					regulator-name = "AVDD_HDMI_3.3V";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 				};
 
-				hdmi_pll_reg: regulator@12 {
-					reg = <12>;
-					regulator-compatible = "ldo8";
-					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+				reg_1v8_avdd_hdmi_pll: ldo8 {
+					regulator-name = "AVDD_HDMI_PLL_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
-				regulator@13 {
-					reg = <13>;
-					regulator-compatible = "ldo9";
-					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+				ldo9 {
+					regulator-name = "VDDIO_RX_DDR_2.85V";
 					regulator-min-microvolt = <2850000>;
 					regulator-max-microvolt = <2850000>;
 					regulator-always-on;
 				};
 
-				regulator@14 {
-					reg = <14>;
-					regulator-compatible = "ldo_rtc";
-					regulator-name = "vdd_rtc_out,vdd_cell";
+				ldo_rtc {
+					regulator-name = "VCC_BATT";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
@@ -397,7 +587,8 @@
 			};
 		};
 
-		temperature-sensor@4c {
+		/* LM95245 temperature sensor */
+		temp-sensor@4c {
 			compatible = "national,lm95245";
 			reg = <0x4c>;
 		};
@@ -410,6 +601,14 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <3875>;
 		nvidia,sys-clock-req-active-high;
+
+		/* Set SLEEP MODE bit in SUPPLYENE register of TPS658643 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <3>;
+			nvidia,bus-addr = <0x34>;
+			nvidia,reg-addr = <0x14>;
+			nvidia,reg-data = <0x8>;
+		};
 	};
 
 	memory-controller@7000f400 {
@@ -483,79 +682,87 @@
 		};
 	};
 
+	/* EHCI instance 1: ULPI PHY -> AX88772B (On-module) */
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		asix@1 {
+			reg = <1>;
+			local-mac-address = [00 00 00 00 00 00];
+		};
 	};
 
 	usb-phy@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
+		nvidia,phy-reset-gpio =
+			<&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+		vbus-supply = <&reg_lan_v_bus>;
 	};
 
-	sdhci@c8000600 {
-		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+	clk32k_in: xtal3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	reg_lan_v_bus: regulator-lan-v-bus {
+		compatible = "regulator-fixed";
+		regulator-name = "LAN_V_BUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_3v3_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "vdd_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "internal_usb";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-boot-on;
-			regulator-always-on;
-			gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
-		};
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	sound {
 		compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
-			         "nvidia,tegra-audio-wm9712";
-		nvidia,model = "Colibri T20 AC97 Audio";
-
+			     "nvidia,tegra-audio-wm9712";
+		nvidia,model = "Toradex Colibri T20";
 		nvidia,audio-routing =
 			"Headphone", "HPOUTL",
 			"Headphone", "HPOUTR",
 			"LineIn", "LINEINL",
 			"LineIn", "LINEINR",
 			"Mic", "MIC1";
-
-		nvidia,ac97-controller = <&ac97>;
-
+		nvidia,ac97-controller = <&tegra_ac97>;
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
 			 <&tegra_car TEGRA20_CLK_CDEV1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };
+
+&gpio {
+	lan-reset-n {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LAN_RESET#";
+	};
+
+	/* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */
+	npwe {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "Tri-state nPWE";
+	};
+
+	/* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */
+	rdnwr {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "Not tri-state RDnWR";
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index ef245291924f..8861e0976e37 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -303,7 +303,7 @@
 		request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
 		slave-addr = <138>;
 		clocks = <&tegra_car TEGRA20_CLK_I2C3>,
-		         <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
 		clock-names = "div-clk", "fast-clk";
 		resets = <&tegra_car 67>;
 		reset-names = "i2c";
@@ -524,10 +524,10 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
-			label = "Power";
+		wakeup {
+			label = "Wakeup";
 			gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
+			linux,code = <KEY_WAKEUP>;
 			wakeup-source;
 		};
 	};
@@ -599,8 +599,8 @@
 			GPIO_ACTIVE_HIGH>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-		         <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-		         <&tegra_car TEGRA20_CLK_CDEV1>;
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 15b73bd377f0..20869757d32f 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -419,19 +419,6 @@
 		status = "disabled";
 	};
 
-	gmi@70009000 {
-		compatible = "nvidia,tegra20-gmi";
-		reg = <0x70009000 0x1000>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0xd0000000 0xfffffff>;
-		clocks = <&tegra_car TEGRA20_CLK_NOR>;
-		clock-names = "gmi";
-		resets = <&tegra_car 42>;
-		reset-names = "gmi";
-		status = "disabled";
-	};
-
 	nand-controller@70008000 {
 		compatible = "nvidia,tegra20-nand";
 		reg = <0x70008000 0x100>;
@@ -447,6 +434,19 @@
 		status = "disabled";
 	};
 
+	gmi@70009000 {
+		compatible = "nvidia,tegra20-gmi";
+		reg = <0x70009000 0x1000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xd0000000 0xfffffff>;
+		clocks = <&tegra_car TEGRA20_CLK_NOR>;
+		clock-names = "gmi";
+		resets = <&tegra_car 42>;
+		reset-names = "gmi";
+		status = "disabled";
+	};
+
 	pwm: pwm@7000a000 {
 		compatible = "nvidia,tegra20-pwm";
 		reg = <0x7000a000 0x100>;
@@ -865,5 +865,7 @@
 		compatible = "arm,cortex-a9-pmu";
 		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&{/cpus/cpu@0}>,
+				     <&{/cpus/cpu@1}>;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
index 0dc85a20bd45..749fc6d1ff70 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -6,11 +6,12 @@
 
 / {
 	model = "Toradex Apalis T30 on Apalis Evaluation Board";
-	compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30", "nvidia,tegra30";
+	compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30",
+		     "nvidia,tegra30";
 
 	aliases {
 		rtc0 = "/i2c@7000c000/rtc@68";
-		rtc1 = "/i2c@7000d000/tps65911@2d";
+		rtc1 = "/i2c@7000d000/pmic@2d";
 		rtc2 = "/rtc@7000e000";
 		serial0 = &uarta;
 		serial1 = &uartb;
@@ -23,8 +24,6 @@
 	};
 
 	pcie@3000 {
-		status = "okay";
-
 		pci@1,0 {
 			status = "okay";
 		};
@@ -32,10 +31,6 @@
 		pci@2,0 {
 			status = "okay";
 		};
-
-		pci@3,0 {
-			status = "okay";
-		};
 	};
 
 	host1x@50000000 {
@@ -45,27 +40,30 @@
 				nvidia,panel = <&panel>;
 			};
 		};
+
 		hdmi@54280000 {
 			status = "okay";
+			hdmi-supply = <&reg_5v0>;
 		};
 	};
 
+	/* Apalis UART1 */
 	serial@70006000 {
 		status = "okay";
 	};
 
+	/* Apalis UART2 */
 	serial@70006040 {
-		compatible = "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
 
+	/* Apalis UART3 */
 	serial@70006200 {
-		compatible = "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
 
+	/* Apalis UART4 */
 	serial@70006300 {
-		compatible = "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
 
@@ -99,13 +97,13 @@
 	 * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
 	 * carrier board)
 	 */
-	cami2c: i2c@7000c500 {
+	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <400000>;
 	};
 
 	/* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
-	hdmiddc: i2c@7000c700 {
+	i2c@7000c700 {
 		status = "okay";
 	};
 
@@ -113,29 +111,16 @@
 	spi@7000d400 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		spidev0: spidev@1 {
-			compatible = "spidev";
-			reg = <1>;
-			spi-max-frequency = <25000000>;
-		};
 	};
 
 	/* SPI5: Apalis SPI2 */
 	spi@7000dc00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		spidev1: spidev@2 {
-			compatible = "spidev";
-			reg = <2>;
-			spi-max-frequency = <25000000>;
-		};
-	};
-
-	hda@70030000 {
-		status = "okay";
 	};
 
-	sd1: sdhci@78000000 {
+	/* Apalis SD1 */
+	sdhci@78000000 {
 		status = "okay";
 		bus-width = <4>;
 		/* SD1_CD# */
@@ -143,7 +128,8 @@
 		no-1-8-v;
 	};
 
-	mmc1: sdhci@78000400 {
+	/* Apalis MMC1 */
+	sdhci@78000400 {
 		status = "okay";
 		bus-width = <8>;
 		/* MMC1_CD# */
@@ -154,12 +140,12 @@
 	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
 	usb@7d000000 {
 		status = "okay";
+		dr_mode = "otg";
 	};
 
 	usb-phy@7d000000 {
 		status = "okay";
-		dr_mode = "otg";
-		vbus-supply = <&usbo1_vbus_reg>;
+		vbus-supply = <&reg_usbo1_vbus>;
 	};
 
 	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
@@ -169,7 +155,7 @@
 
 	usb-phy@7d004000 {
 		status = "okay";
-		vbus-supply = <&usbh_vbus_reg>;
+		vbus-supply = <&reg_usbh_vbus>;
 	};
 
 	/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
@@ -179,18 +165,17 @@
 
 	usb-phy@7d008000 {
 		status = "okay";
-		vbus-supply = <&usbh_vbus_reg>;
+		vbus-supply = <&reg_usbh_vbus>;
 	};
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-
-		/* PWM_BKL1 */
-		pwms = <&pwm 0 5000000>;
 		brightness-levels = <255 231 223 207 191 159 127 0>;
 		default-brightness-level = <6>;
 		/* BKL1_ON */
 		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 0 5000000>; /* BKL1_PWM */
 	};
 
 	gpio-keys {
@@ -211,64 +196,53 @@
 		 * edt,et070080dh6: EDT 7.0" LCD TFT
 		 */
 		compatible = "edt,et057090dhu", "simple-panel";
-
 		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
 	};
 
-	pwmleds {
-		compatible = "pwm-leds";
-
-		pwm1 {
-			label = "PWM1";
-			pwms = <&pwm 3 19600>;
-			max-brightness = <255>;
-		};
-
-		pwm2 {
-			label = "PWM2";
-			pwms = <&pwm 2 19600>;
-			max-brightness = <255>;
-		};
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
-		pwm3 {
-			label = "PWM3";
-			pwms = <&pwm 1 19600>;
-			max-brightness = <255>;
-		};
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 	};
 
-	regulators {
-		sys_5v0_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	/* USBO1_EN */
+	reg_usbo1_vbus: regulator-usbo1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBO1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
 
-		/* USBO1_EN */
-		usbo1_vbus_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usbo1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&sys_5v0_reg>;
-		};
+	/* USBH_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+};
 
-		/* USBH_EN */
-		usbh_vbus_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usbh_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&sys_5v0_reg>;
-		};
+&gpio {
+	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+	pex-perst-n {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PEX_PERST_N";
 	};
 };
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
new file mode 100644
index 000000000000..0be50e881684
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra30-apalis-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis T30 on Apalis Evaluation Board";
+	compatible = "toradex,apalis_t30-v1.1-eval", "toradex,apalis_t30-eval",
+		     "toradex,apalis_t30-v1.1", "toradex,apalis_t30",
+		     "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@2d";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pcie@3000 {
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+			hdmi-supply = <&reg_5v0>;
+		};
+	};
+
+	/* Apalis UART1 */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Apalis UART2 */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Apalis UART3 */
+	serial@70006200 {
+		status = "okay";
+	};
+
+	/* Apalis UART4 */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pcie-switch@58 {
+			compatible = "plx,pex8605";
+			reg = <0x58>;
+		};
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/*
+	 * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
+	 * carrier board)
+	 */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
+	i2c@7000c700 {
+		status = "okay";
+	};
+
+	/* SPI1: Apalis SPI1 */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* SPI5: Apalis SPI2 */
+	spi@7000dc00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* Apalis SD1 */
+	sdhci@78000000 {
+		status = "okay";
+		bus-width = <4>;
+		/* SD1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
+		no-1-8-v;
+	};
+
+	/* Apalis MMC1 */
+	sdhci@78000400 {
+		status = "okay";
+		bus-width = <8>;
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		vqmmc-supply = <&reg_vddio_sdmmc3>;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbo1_vbus>;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 231 223 207 191 159 127 0>;
+		default-brightness-level = <6>;
+		/* BKL1_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 0 5000000>; /* BKL1_PWM */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "WAKE1_MICO";
+			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu", "simple-panel";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/* USBO1_EN */
+	reg_usbo1_vbus: regulator-usbo1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBO1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/*
+	 * 1.8 volt resp. 3.3 volt VDDIO_SDMMC3 depending on
+	 * EN_+3.3_SDMMC3 GPIO
+	 */
+	reg_vddio_sdmmc3: regulator-vddio-sdmmc3 {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_SDMMC3";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-type = "voltage";
+		gpios = <&gpio TEGRA_GPIO(J, 5) GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0
+			  3300000 0x1>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vddio_sdmmc_1v8_reg>;
+	};
+};
+
+&gpio {
+	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+	pex-perst-n {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PEX_PERST_N";
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
new file mode 100644
index 000000000000..02f8126481a2
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
@@ -0,0 +1,1189 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Apalis T30 Module Device Tree
+ * Compatible for Revisions 1GB: V1.1A, V1.1B; 1GB IT: V1.1A, V1.1B;
+ * 2GB: V1.1A, V1.1B
+ */
+/ {
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	pcie@3000 {
+		status = "okay";
+		avdd-pexa-supply = <&vdd2_reg>;
+		avdd-pexb-supply = <&vdd2_reg>;
+		avdd-pex-pll-supply = <&vdd2_reg>;
+		avdd-plle-supply = <&ldo6_reg>;
+		hvdd-pex-supply = <&reg_module_3v3>;
+		vddio-pex-ctl-supply = <&reg_module_3v3>;
+		vdd-pexa-supply = <&vdd2_reg>;
+		vdd-pexb-supply = <&vdd2_reg>;
+
+		/* Apalis type specific */
+		pci@1,0 {
+			nvidia,num-lanes = <4>;
+		};
+
+		/* Apalis PCIe */
+		pci@2,0 {
+			nvidia,num-lanes = <1>;
+		};
+
+		/* I210/I211 Gigabit Ethernet Controller (on-module) */
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <1>;
+
+			pcie@0 {
+				reg = <0 0 0 0 0>;
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			pll-supply = <&reg_1v8_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			clk1-out-pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3-fs-pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+					      "dap3_sclk_pp3",
+					      "dap3_din_pp1",
+					      "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_ON */
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_PWM */
+			uart3-rts-n-pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
+			uart3-cts-n-pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis CAN1 on SPI6 */
+			spi2-cs0-n-px3 {
+				nvidia,pins = "spi2_cs0_n_px3",
+					      "spi2_miso_px1",
+					      "spi2_mosi_px0",
+					      "spi2_sck_px2";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* CAN_INT1 */
+			spi2-cs1-n-pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis CAN2 on SPI4 */
+			gmi-a16-pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+					      "gmi_a17_pb0",
+					      "gmi_a18_pb1",
+					      "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* CAN_INT2 */
+			spi2-cs2-n-pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis Digital Audio */
+			clk1-req-pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			clk2-out-pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1-fs-pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+					      "dap1_din_pn1",
+					      "dap1_dout_pn2",
+					      "dap1_sclk_pn3";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis GPIO */
+			kb-col0-pq0 {
+				nvidia,pins = "kb_col0_pq0",
+					      "kb_col1_pq1",
+					      "kb_row10_ps2",
+					      "kb_row11_ps3",
+					      "kb_row12_ps4",
+					      "kb_row13_ps5",
+					      "kb_row14_ps6",
+					      "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Multiplexed and therefore disabled */
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1 */
+			hdmi-cec-pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi-int-pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C1 */
+			gen1-i2c-scl-pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C2 (DDC) */
+			ddc-scl-pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C3 (CAM) */
+			cam-i2c-scl-pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis LCD1 */
+			lcd-d0-pe0 {
+				nvidia,pins = "lcd_d0_pe0",
+					      "lcd_d1_pe1",
+					      "lcd_d2_pe2",
+					      "lcd_d3_pe3",
+					      "lcd_d4_pe4",
+					      "lcd_d5_pe5",
+					      "lcd_d6_pe6",
+					      "lcd_d7_pe7",
+					      "lcd_d8_pf0",
+					      "lcd_d9_pf1",
+					      "lcd_d10_pf2",
+					      "lcd_d11_pf3",
+					      "lcd_d12_pf4",
+					      "lcd_d13_pf5",
+					      "lcd_d14_pf6",
+					      "lcd_d15_pf7",
+					      "lcd_d16_pm0",
+					      "lcd_d17_pm1",
+					      "lcd_d18_pm2",
+					      "lcd_d19_pm3",
+					      "lcd_d20_pm4",
+					      "lcd_d21_pm5",
+					      "lcd_d22_pm6",
+					      "lcd_d23_pm7",
+					      "lcd_de_pj1",
+					      "lcd_hsync_pj3",
+					      "lcd_pclk_pb3",
+					      "lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis MMC1 */
+			sdmmc3-clk-pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3-dat0-pb7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_dat4_pd1",
+					      "sdmmc3_dat5_pd0",
+					      "sdmmc3_dat6_pd3",
+					      "sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Apalis MMC1_CD# */
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis Parallel Camera */
+			cam-mclk-pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi-vsync-pd6 {
+				nvidia,pins = "vi_d0_pt4",
+					      "vi_d1_pd5",
+					      "vi_d2_pl0",
+					      "vi_d3_pl1",
+					      "vi_d4_pl2",
+					      "vi_d5_pl3",
+					      "vi_d6_pl4",
+					      "vi_d7_pl5",
+					      "vi_d8_pl6",
+					      "vi_d9_pl7",
+					      "vi_d10_pt2",
+					      "vi_d11_pt3",
+					      "vi_hsync_pd7",
+					      "vi_pclk_pt0",
+					      "vi_vsync_pd6";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Multiplexed and therefore disabled */
+			kb-col2-pq2 {
+				nvidia,pins = "kb_col2_pq2",
+					      "kb_col3_pq3",
+					      "kb_col4_pq4",
+					      "kb_row4_pr4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0",
+					      "kb_row1_pr1",
+					      "kb_row2_pr2",
+					      "kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row5-pr5 {
+				nvidia,pins = "kb_row5_pr5",
+					      "kb_row6_pr6",
+					      "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/*
+			 * VI level-shifter direction
+			 * (pull-down => default direction input)
+			 */
+			vi-mclk-pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM1 */
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM2 */
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM3 */
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM4 */
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis RESET_MOCI# */
+			gmi-rst-n-pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SATA1_ACT# */
+			pex-l0-prsnt-n-pdd0 {
+				nvidia,pins = "pex_l0_prsnt_n_pdd0";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SD1 */
+			sdmmc1-clk-pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1-cmd-pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Apalis SD1_CD# */
+			clk2-req-pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPDIF1 */
+			spdif-out-pk5 {
+				nvidia,pins = "spdif_out_pk5",
+					      "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPI1 */
+			spi1-sck-px5 {
+				nvidia,pins = "spi1_sck_px5",
+					      "spi1_mosi_px4",
+					      "spi1_miso_px7",
+					      "spi1_cs0_n_px6";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SPI2 */
+			lcd-sck-pz4 {
+				nvidia,pins = "lcd_sck_pz4",
+					      "lcd_sdout_pn5",
+					      "lcd_sdin_pz2",
+					      "lcd_cs0_n_pn4";
+				nvidia,function = "spi5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * Apalis TS (Low-speed type specific)
+			 * pins may be used as GPIOs
+			 */
+			kb-col5-pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-col6-pq6 {
+				nvidia,pins = "kb_col6_pq6",
+					      "kb_col7_pq7",
+					      "kb_row8_ps0",
+					      "kb_row9_ps1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis UART1 */
+			ulpi-data0 {
+				nvidia,pins = "ulpi_data0_po1",
+					      "ulpi_data1_po2",
+					      "ulpi_data2_po3",
+					      "ulpi_data3_po4",
+					      "ulpi_data4_po5",
+					      "ulpi_data5_po6",
+					      "ulpi_data6_po7",
+					      "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART2 */
+			ulpi-clk-py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_dir_py1",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART3 */
+			uart2-rxd-pc3 {
+				nvidia,pins = "uart2_rxd_pc3",
+					      "uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART4 */
+			uart3-rxd-pw7 {
+				nvidia,pins = "uart3_rxd_pw7",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_EN */
+			pex-l0-rst-n-pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_OC# */
+			pex-l0-clkreq-n-pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis USBO1_EN */
+			gen2-i2c-scl-pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "rsvd4";
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBO1_OC# */
+			gen2-i2c-sda-pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "rsvd4";
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis VGA1 not supported and therefore disabled */
+			crt-hsync-pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+					      "crt_vsync_pv7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis WAKE1_MICO */
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* eMMC (On-module) */
+			sdmmc4-clk-pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4",
+					      "sdmmc4_cmd_pt7",
+					      "sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat0-paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* EN_+3.3_SDMMC3 */
+			uart2-cts-n-pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN i210/i211 DEV_OFF_N, PE_RST_N (On-module) */
+			pex-l2-prsnt-n-pdd7 {
+				nvidia,pins = "pex_l2_prsnt_n_pdd7",
+					      "pex_l2_rst_n_pcc6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* LAN i210/i211 PE_WAKE_N, SDP3 (On-module) */
+			pex-wake-n-pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3",
+					      "pex_l2_clkreq_n_pcc7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* LAN i210/i211 SMB_ALERT_N (On-module) */
+			sys-clk-req-pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* LVDS Transceiver Configuration */
+			pbb0 {
+				nvidia,pins = "pbb0",
+					      "pbb7",
+					      "pcc1",
+					      "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3",
+					      "pbb4",
+					      "pbb5",
+					      "pbb6";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Not connected and therefore disabled */
+			clk-32k-out-pa0 {
+				nvidia,pins = "clk3_out_pee0",
+					      "clk3_req_pee1",
+					      "clk_32k_out_pa0",
+					      "dap4_din_pp5",
+					      "dap4_dout_pp6",
+					      "dap4_fs_pp4",
+					      "dap4_sclk_pp7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2-fs-pa2 {
+				nvidia,pins = "dap2_fs_pa2",
+					      "dap2_sclk_pa3",
+					      "dap2_din_pa4",
+					      "dap2_dout_pa5",
+					      "lcd_dc0_pn6",
+					      "lcd_m1_pw1",
+					      "lcd_pwr1_pc1",
+					      "pex_l1_clkreq_n_pdd6",
+					      "pex_l1_prsnt_n_pdd4",
+					      "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad0-pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+					      "gmi_ad2_pg2",
+					      "gmi_ad3_pg3",
+					      "gmi_ad4_pg4",
+					      "gmi_ad5_pg5",
+					      "gmi_ad6_pg6",
+					      "gmi_ad7_pg7",
+					      "gmi_ad8_ph0",
+					      "gmi_ad9_ph1",
+					      "gmi_ad10_ph2",
+					      "gmi_ad11_ph3",
+					      "gmi_ad12_ph4",
+					      "gmi_ad13_ph5",
+					      "gmi_ad14_ph6",
+					      "gmi_ad15_ph7",
+					      "gmi_adv_n_pk0",
+					      "gmi_clk_pk1",
+					      "gmi_cs4_n_pk2",
+					      "gmi_cs2_n_pk3",
+					      "gmi_dqs_pi2",
+					      "gmi_iordy_pi5",
+					      "gmi_oe_n_pi1",
+					      "gmi_wait_pi7",
+					      "gmi_wr_n_pi0",
+					      "lcd_cs1_n_pw0",
+					      "pu0",
+					      "pu1",
+					      "pu2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs0-n-pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0",
+					      "gmi_cs1_n_pj2",
+					      "gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs6-n-pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs7-n-pi6 {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "gmi_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd-pwr0-pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+					      "lcd_pwr2_pc6",
+					      "lcd_wr_n_pz3";
+				nvidia,function = "hdcp";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2-rts-n-pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Power I2C (On-module) */
+			pwr-i2c-scl-pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * THERMD_ALERT#, unlatched I2C address pin of LM95245
+			 * temperature sensor therefore requires disabling for
+			 * now
+			 */
+			lcd-dc1-pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* TOUCH_PEN_INT# (On-module) */
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra30-hsuart";
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		clock-frequency = <10000>;
+	};
+
+	/*
+	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+	 * touch screen controller
+	 */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			VDDA-supply = <&reg_module_3v3_audio>;
+			VDDD-supply = <&reg_1v8_vio>;
+			VDDIO-supply = <&reg_module_3v3>;
+			clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
+		};
+
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&reg_module_3v3>;
+			vcc2-supply = <&reg_module_3v3>;
+			vcc3-supply = <&reg_1v8_vio>;
+			vcc4-supply = <&reg_module_3v3>;
+			vcc5-supply = <&reg_module_3v3>;
+			vcc6-supply = <&reg_1v8_vio>;
+			vcc7-supply = <&reg_5v0_charge_pump>;
+			vccio-supply = <&reg_module_3v3>;
+
+			regulators {
+				vdd1_reg: vdd1 {
+					regulator-name = "+V1.35_VDDIO_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "+V1.05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddctrl_reg: vddctrl {
+					regulator-name = "+V1.0_VDD_CPU";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+				};
+
+				reg_1v8_vio: vio {
+					regulator-name = "+V1.8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * 1.8 volt +VDDIO_SDMMC3 in case EN_+3.3_SDMMC3
+				 * is off
+				 */
+				vddio_sdmmc_1v8_reg: ldo1 {
+					regulator-name = "+VDDIO_SDMMC3_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * EN_+V3.3 switching via FET:
+				 * +V3.3_AUDIO_AVDD_S, +V3.3
+				 * see also +V3.3 fixed supply
+				 */
+				ldo2_reg: ldo2 {
+					regulator-name = "EN_+V3.3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: ldo3 {
+					regulator-name = "+V1.2_CSI";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo4_reg: ldo4 {
+					regulator-name = "+V1.2_VDD_RTC";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V2.8_AVDD_VDAC:
+				 * only required for (unsupported) analog RGB
+				 */
+				ldo5_reg: ldo5 {
+					regulator-name = "+V2.8_AVDD_VDAC";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+				 * but LDO6 can't set voltage in 50mV
+				 * granularity
+				 */
+				ldo6_reg: ldo6 {
+					regulator-name = "+V1.05_AVDD_PLLE";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "+V1.2_AVDD_PLL";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "+V1.0_VDD_DDR_HS";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		/* STMPE811 touch screen controller */
+		touchscreen@41 {
+			compatible = "st,stmpe811";
+			reg = <0x41>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			id = <0>;
+			blocks = <0x5>;
+			irq-trigger = <0x1>;
+
+			stmpe_touchscreen {
+				compatible = "st,stmpe-ts";
+				/* 3.25 MHz ADC clock speed */
+				st,adc-freq = <1>;
+				/* 8 sample average control */
+				st,ave-ctrl = <3>;
+				/* 7 length fractional part in z */
+				st,fraction-z = <7>;
+				/*
+				 * 50 mA typical 80 mA max touchscreen drivers
+				 * current limit value
+				 */
+				st,i-drive = <1>;
+				/* 12-bit ADC */
+				st,mod-12b = <1>;
+				/* internal ADC reference */
+				st,ref-sel = <0>;
+				/* ADC converstion time: 80 clocks */
+				st,sample-time = <4>;
+				/* 1 ms panel driver settling time */
+				st,settling = <3>;
+				/* 5 ms touch detect interrupt delay */
+				st,touch-det-delay = <5>;
+			};
+		};
+
+		/*
+		 * LM95245 temperature sensor
+		 * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
+		 */
+		temp-sensor@4c {
+			compatible = "national,lm95245";
+			reg = <0x4c>;
+		};
+
+		/* SW: +V1.2_VDD_CORE */
+		regulator@60 {
+			compatible = "ti,tps62362";
+			reg = <0x60>;
+
+			regulator-name = "tps62362-vout";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-low;
+			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
+			ti,vsel1-state-low;
+		};
+	};
+
+	/* SPI4: CAN2 */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <10000000>;
+
+		can@1 {
+			compatible = "microchip,mcp2515";
+			reg = <1>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+		};
+	};
+
+	/* SPI6: CAN1 */
+	spi@7000de00 {
+		status = "okay";
+		spi-max-frequency = <10000000>;
+
+		can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		/* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x1>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080500 {
+			status = "okay";
+		};
+	};
+
+	/* eMMC */
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+		vmmc-supply = <&reg_module_3v3>; /* VCC */
+		vqmmc-supply = <&reg_1v8_vio>; /* VCCQ */
+		mmc-ddr-1_8v;
+	};
+
+	clk32k_in: xtal1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	clk16m: osc4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
+	reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.8_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_1v8_vio>;
+	};
+
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_5v0_charge_pump: regulator-5v0-charge-pump {
+		compatible = "regulator-fixed";
+		regulator-name = "+V5.0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO_AVDD_S";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Apalis T30";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA30_CLK_EXTERN1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 2f807d40c1b7..7f112f192fe9 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -3,48 +3,53 @@
 
 /*
  * Toradex Apalis T30 Module Device Tree
- * Compatible for Revisions 1GB: V1.0A, V1.1A; 1GB IT: V1.1A;
- * 2GB: V1.0B, V1.0C, V1.0E, V1.1A
+ * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C, V1.0E
  */
 / {
-	model = "Toradex Apalis T30";
-	compatible = "toradex,apalis_t30", "nvidia,tegra30";
-
 	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
 
 	pcie@3000 {
+		status = "okay";
 		avdd-pexa-supply = <&vdd2_reg>;
-		vdd-pexa-supply = <&vdd2_reg>;
 		avdd-pexb-supply = <&vdd2_reg>;
-		vdd-pexb-supply = <&vdd2_reg>;
 		avdd-pex-pll-supply = <&vdd2_reg>;
 		avdd-plle-supply = <&ldo6_reg>;
-		vddio-pex-ctl-supply = <&sys_3v3_reg>;
-		hvdd-pex-supply = <&sys_3v3_reg>;
+		hvdd-pex-supply = <&reg_module_3v3>;
+		vddio-pex-ctl-supply = <&reg_module_3v3>;
+		vdd-pexa-supply = <&vdd2_reg>;
+		vdd-pexb-supply = <&vdd2_reg>;
 
+		/* Apalis type specific */
 		pci@1,0 {
 			nvidia,num-lanes = <4>;
 		};
 
+		/* Apalis PCIe */
 		pci@2,0 {
 			nvidia,num-lanes = <1>;
 		};
 
+		/* I210/I211 Gigabit Ethernet Controller (on-module) */
 		pci@3,0 {
+			status = "okay";
 			nvidia,num-lanes = <1>;
+
+			pcie@0 {
+				reg = <0 0 0 0 0>;
+				local-mac-address = [00 00 00 00 00 00];
+			};
 		};
 	};
 
 	host1x@50000000 {
 		hdmi@54280000 {
-			vdd-supply = <&avdd_hdmi_3v3_reg>;
-			pll-supply = <&avdd_hdmi_pll_1v8_reg>;
-
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
 			nvidia,hpd-gpio =
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
-			nvidia,ddc-i2c-bus = <&hdmiddc>;
+			pll-supply = <&reg_1v8_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
 		};
 	};
 
@@ -54,18 +59,18 @@
 
 		state_default: pinmux {
 			/* Analogue Audio (On-module) */
-			clk1_out_pw4 {
+			clk1-out-pw4 {
 				nvidia,pins = "clk1_out_pw4";
 				nvidia,function = "extperiph1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap3_fs_pp0 {
-				nvidia,pins =	"dap3_fs_pp0",
-						"dap3_sclk_pp3",
-						"dap3_din_pp1",
-						"dap3_dout_pp2";
+			dap3-fs-pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+					      "dap3_sclk_pp3",
+					      "dap3_din_pp1",
+					      "dap3_dout_pp2";
 				nvidia,function = "i2s2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -77,25 +82,28 @@
 				nvidia,function = "rsvd4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
 
 			/* Apalis BKL1_PWM */
-			uart3_rts_n_pc0 {
+			uart3-rts-n-pc0 {
 				nvidia,pins = "uart3_rts_n_pc0";
 				nvidia,function = "pwm0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
 			/* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
-			uart3_cts_n_pa1 {
+			uart3-cts-n-pa1 {
 				nvidia,pins = "uart3_cts_n_pa1";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
 
 			/* Apalis CAN1 on SPI6 */
-			spi2_cs0_n_px3 {
+			spi2-cs0-n-px3 {
 				nvidia,pins = "spi2_cs0_n_px3",
 					      "spi2_miso_px1",
 					      "spi2_mosi_px0",
@@ -105,7 +113,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			/* CAN_INT1 */
-			spi2_cs1_n_pw2 {
+			spi2-cs1-n-pw2 {
 				nvidia,pins = "spi2_cs1_n_pw2";
 				nvidia,function = "spi3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -114,7 +122,7 @@
 			};
 
 			/* Apalis CAN2 on SPI4 */
-			gmi_a16_pj7 {
+			gmi-a16-pj7 {
 				nvidia,pins = "gmi_a16_pj7",
 					      "gmi_a17_pb0",
 					      "gmi_a18_pb1",
@@ -125,7 +133,7 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 			/* CAN_INT2 */
-			spi2_cs2_n_pw3 {
+			spi2-cs2-n-pw3 {
 				nvidia,pins = "spi2_cs2_n_pw3";
 				nvidia,function = "spi3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -134,20 +142,20 @@
 			};
 
 			/* Apalis Digital Audio */
-			clk1_req_pee2 {
+			clk1-req-pee2 {
 				nvidia,pins = "clk1_req_pee2";
 				nvidia,function = "hda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
-			clk2_out_pw5 {
+			clk2-out-pw5 {
 				nvidia,pins = "clk2_out_pw5";
 				nvidia,function = "extperiph2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap1_fs_pn0 {
+			dap1-fs-pn0 {
 				nvidia,pins = "dap1_fs_pn0",
 					      "dap1_din_pn1",
 					      "dap1_dout_pn2",
@@ -157,28 +165,125 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			/* Apalis I2C3 */
-			cam_i2c_scl_pbb1 {
+			/* Apalis GPIO */
+			kb-col0-pq0 {
+				nvidia,pins = "kb_col0_pq0",
+					      "kb_col1_pq1",
+					      "kb_row10_ps2",
+					      "kb_row11_ps3",
+					      "kb_row12_ps4",
+					      "kb_row13_ps5",
+					      "kb_row14_ps6",
+					      "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Multiplexed and therefore disabled */
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1 */
+			hdmi-cec-pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi-int-pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C1 */
+			gen1-i2c-scl-pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C2 (DDC) */
+			ddc-scl-pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C3 (CAM) */
+			cam-i2c-scl-pbb1 {
 				nvidia,pins = "cam_i2c_scl_pbb1",
 					      "cam_i2c_sda_pbb2";
 				nvidia,function = "i2c3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
 				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
 			};
 
+			/* Apalis LCD1 */
+			lcd-d0-pe0 {
+				nvidia,pins = "lcd_d0_pe0",
+					      "lcd_d1_pe1",
+					      "lcd_d2_pe2",
+					      "lcd_d3_pe3",
+					      "lcd_d4_pe4",
+					      "lcd_d5_pe5",
+					      "lcd_d6_pe6",
+					      "lcd_d7_pe7",
+					      "lcd_d8_pf0",
+					      "lcd_d9_pf1",
+					      "lcd_d10_pf2",
+					      "lcd_d11_pf3",
+					      "lcd_d12_pf4",
+					      "lcd_d13_pf5",
+					      "lcd_d14_pf6",
+					      "lcd_d15_pf7",
+					      "lcd_d16_pm0",
+					      "lcd_d17_pm1",
+					      "lcd_d18_pm2",
+					      "lcd_d19_pm3",
+					      "lcd_d20_pm4",
+					      "lcd_d21_pm5",
+					      "lcd_d22_pm6",
+					      "lcd_d23_pm7",
+					      "lcd_de_pj1",
+					      "lcd_hsync_pj3",
+					      "lcd_pclk_pb3",
+					      "lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
 			/* Apalis MMC1 */
-			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6",
-					      "sdmmc3_cmd_pa7";
+			sdmmc3-clk-pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
-			sdmmc3_dat0_pb7 {
-				nvidia,pins = "sdmmc3_dat0_pb7",
+			sdmmc3-dat0-pb7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
 					      "sdmmc3_dat1_pb6",
 					      "sdmmc3_dat2_pb5",
 					      "sdmmc3_dat3_pb4",
@@ -194,10 +299,81 @@
 			pv3 {
 				nvidia,pins = "pv3";
 				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis Parallel Camera */
+			cam-mclk-pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi-vsync-pd6 {
+				nvidia,pins = "vi_d0_pt4",
+					      "vi_d1_pd5",
+					      "vi_d2_pl0",
+					      "vi_d3_pl1",
+					      "vi_d4_pl2",
+					      "vi_d5_pl3",
+					      "vi_d6_pl4",
+					      "vi_d7_pl5",
+					      "vi_d8_pl6",
+					      "vi_d9_pl7",
+					      "vi_d10_pt2",
+					      "vi_d11_pt3",
+					      "vi_hsync_pd7",
+					      "vi_pclk_pt0",
+					      "vi_vsync_pd6";
+				nvidia,function = "vi";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
+			/* Multiplexed and therefore disabled */
+			kb-col2-pq2 {
+				nvidia,pins = "kb_col2_pq2",
+					      "kb_col3_pq3",
+					      "kb_col4_pq4",
+					      "kb_row4_pr4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0",
+					      "kb_row1_pr1",
+					      "kb_row2_pr2",
+					      "kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row5-pr5 {
+				nvidia,pins = "kb_row5_pr5",
+					      "kb_row6_pr6",
+					      "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/*
+			 * VI level-shifter direction
+			 * (pull-down => default direction input)
+			 */
+			vi-mclk-pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
 
 			/* Apalis PWM1 */
 			pu6 {
@@ -232,21 +408,30 @@
 			};
 
 			/* Apalis RESET_MOCI# */
-			gmi_rst_n_pi4 {
+			gmi-rst-n-pi4 {
 				nvidia,pins = "gmi_rst_n_pi4";
 				nvidia,function = "gmi";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
+			/* Apalis SATA1_ACT# */
+			pex-l0-prsnt-n-pdd0 {
+				nvidia,pins = "pex_l0_prsnt_n_pdd0";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
 			/* Apalis SD1 */
-			sdmmc1_clk_pz0 {
+			sdmmc1-clk-pz0 {
 				nvidia,pins = "sdmmc1_clk_pz0";
 				nvidia,function = "sdmmc1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
-			sdmmc1_cmd_pz1 {
+			sdmmc1-cmd-pz1 {
 				nvidia,pins = "sdmmc1_cmd_pz1",
 					      "sdmmc1_dat0_py7",
 					      "sdmmc1_dat1_py6",
@@ -257,16 +442,26 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			/* Apalis SD1_CD# */
-			clk2_req_pcc5 {
+			clk2-req-pcc5 {
 				nvidia,pins = "clk2_req_pcc5";
 				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPDIF1 */
+			spdif-out-pk5 {
+				nvidia,pins = "spdif_out_pk5",
+					      "spdif_in_pk6";
+				nvidia,function = "spdif";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 
 			/* Apalis SPI1 */
-			spi1_sck_px5 {
+			spi1-sck-px5 {
 				nvidia,pins = "spi1_sck_px5",
 					      "spi1_mosi_px4",
 					      "spi1_miso_px7",
@@ -277,7 +472,7 @@
 			};
 
 			/* Apalis SPI2 */
-			lcd_sck_pz4 {
+			lcd-sck-pz4 {
 				nvidia,pins = "lcd_sck_pz4",
 					      "lcd_sdout_pn5",
 					      "lcd_sdin_pz2",
@@ -287,8 +482,30 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
+			/*
+			 * Apalis TS (Low-speed type specific)
+			 * pins may be used as GPIOs
+			 */
+			kb-col5-pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-col6-pq6 {
+				nvidia,pins = "kb_col6_pq6",
+					      "kb_col7_pq7",
+					      "kb_row8_ps0",
+					      "kb_row9_ps1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
 			/* Apalis UART1 */
-			ulpi_data0 {
+			ulpi-data0 {
 				nvidia,pins = "ulpi_data0_po1",
 					      "ulpi_data1_po2",
 					      "ulpi_data2_po3",
@@ -303,7 +520,7 @@
 			};
 
 			/* Apalis UART2 */
-			ulpi_clk_py0 {
+			ulpi-clk-py0 {
 				nvidia,pins = "ulpi_clk_py0",
 					      "ulpi_dir_py1",
 					      "ulpi_nxt_py2",
@@ -314,7 +531,7 @@
 			};
 
 			/* Apalis UART3 */
-			uart2_rxd_pc3 {
+			uart2-rxd-pc3 {
 				nvidia,pins = "uart2_rxd_pc3",
 					      "uart2_txd_pc2";
 				nvidia,function = "uartb";
@@ -323,7 +540,7 @@
 			};
 
 			/* Apalis UART4 */
-			uart3_rxd_pw7 {
+			uart3-rxd-pw7 {
 				nvidia,pins = "uart3_rxd_pw7",
 					      "uart3_txd_pw6";
 				nvidia,function = "uartc";
@@ -331,8 +548,26 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
+			/* Apalis USBH_EN */
+			pex-l0-rst-n-pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_OC# */
+			pex-l0-clkreq-n-pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
 			/* Apalis USBO1_EN */
-			gen2_i2c_scl_pt5 {
+			gen2-i2c-scl-pt5 {
 				nvidia,pins = "gen2_i2c_scl_pt5";
 				nvidia,function = "rsvd4";
 				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
@@ -341,7 +576,7 @@
 			};
 
 			/* Apalis USBO1_OC# */
-			gen2_i2c_sda_pt6 {
+			gen2-i2c-sda-pt6 {
 				nvidia,pins = "gen2_i2c_sda_pt6";
 				nvidia,function = "rsvd4";
 				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
@@ -350,6 +585,16 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 
+			/* Apalis VGA1 not supported and therefore disabled */
+			crt-hsync-pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+					      "crt_vsync_pv7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
 			/* Apalis WAKE1_MICO */
 			pv1 {
 				nvidia,pins = "pv1";
@@ -360,14 +605,16 @@
 			};
 
 			/* eMMC (On-module) */
-			sdmmc4_clk_pcc4 {
+			sdmmc4-clk-pcc4 {
 				nvidia,pins = "sdmmc4_clk_pcc4",
+					      "sdmmc4_cmd_pt7",
 					      "sdmmc4_rst_n_pcc3";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_dat0_paa0 {
+			sdmmc4-dat0-paa0 {
 				nvidia,pins = "sdmmc4_dat0_paa0",
 					      "sdmmc4_dat1_paa1",
 					      "sdmmc4_dat2_paa2",
@@ -379,6 +626,34 @@
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* LAN i210/i211 DEV_OFF_N, PE_RST_N (On-module) */
+			pex-l2-prsnt-n-pdd7 {
+				nvidia,pins = "pex_l2_prsnt_n_pdd7",
+					      "pex_l2_rst_n_pcc6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* LAN i210/i211 PE_WAKE_N, SDP3 (On-module) */
+			pex-wake-n-pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3",
+					      "pex_l2_clkreq_n_pcc7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* LAN i210/i211 SMB_ALERT_N (On-module) */
+			sys-clk-req-pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 
 			/* LVDS Transceiver Configuration */
@@ -391,7 +666,6 @@
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
 			};
 			pbb3 {
 				nvidia,pins = "pbb3",
@@ -402,18 +676,121 @@
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Not connected and therefore disabled */
+			clk-32k-out-pa0 {
+				nvidia,pins = "clk3_out_pee0",
+					      "clk3_req_pee1",
+					      "clk_32k_out_pa0",
+					      "dap4_din_pp5",
+					      "dap4_dout_pp6",
+					      "dap4_fs_pp4",
+					      "dap4_sclk_pp7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2-fs-pa2 {
+				nvidia,pins = "dap2_fs_pa2",
+					      "dap2_sclk_pa3",
+					      "dap2_din_pa4",
+					      "dap2_dout_pa5",
+					      "lcd_dc0_pn6",
+					      "lcd_m1_pw1",
+					      "lcd_pwr1_pc1",
+					      "pex_l1_clkreq_n_pdd6",
+					      "pex_l1_prsnt_n_pdd4",
+					      "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad0-pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+					      "gmi_ad2_pg2",
+					      "gmi_ad3_pg3",
+					      "gmi_ad4_pg4",
+					      "gmi_ad5_pg5",
+					      "gmi_ad6_pg6",
+					      "gmi_ad7_pg7",
+					      "gmi_ad8_ph0",
+					      "gmi_ad9_ph1",
+					      "gmi_ad10_ph2",
+					      "gmi_ad11_ph3",
+					      "gmi_ad12_ph4",
+					      "gmi_ad13_ph5",
+					      "gmi_ad14_ph6",
+					      "gmi_ad15_ph7",
+					      "gmi_adv_n_pk0",
+					      "gmi_clk_pk1",
+					      "gmi_cs4_n_pk2",
+					      "gmi_cs2_n_pk3",
+					      "gmi_dqs_pi2",
+					      "gmi_iordy_pi5",
+					      "gmi_oe_n_pi1",
+					      "gmi_wait_pi7",
+					      "gmi_wr_n_pi0",
+					      "lcd_cs1_n_pw0",
+					      "pu0",
+					      "pu1",
+					      "pu2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs0-n-pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0",
+					      "gmi_cs1_n_pj2",
+					      "gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs6-n-pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs7-n-pi6 {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "gmi_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd-pwr0-pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+					      "lcd_pwr2_pc6",
+					      "lcd_wr_n_pz3";
+				nvidia,function = "hdcp";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2-cts-n-pj5 {
+				nvidia,pins = "uart2_cts_n_pj5",
+					      "uart2_rts_n_pj6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
 
 			/* Power I2C (On-module) */
-			pwr_i2c_scl_pz6 {
+			pwr-i2c-scl-pz6 {
 				nvidia,pins = "pwr_i2c_scl_pz6",
 					      "pwr_i2c_sda_pz7";
 				nvidia,function = "i2cpwr";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
 				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
 			};
 
@@ -422,15 +799,15 @@
 			 * temperature sensor therefore requires disabling for
 			 * now
 			 */
-			lcd_dc1_pd2 {
+			lcd-dc1-pd2 {
 				nvidia,pins = "lcd_dc1_pd2";
 				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
 
-			/* TOUCH_PEN_INT# */
+			/* TOUCH_PEN_INT# (On-module) */
 			pv0 {
 				nvidia,pins = "pv0";
 				nvidia,function = "rsvd1";
@@ -441,7 +818,19 @@
 		};
 	};
 
-	hdmiddc: i2c@7000c700 {
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra30-hsuart";
+	};
+
+	hdmi_ddc: i2c@7000c700 {
 		clock-frequency = <10000>;
 	};
 
@@ -457,12 +846,13 @@
 		sgtl5000: codec@a {
 			compatible = "fsl,sgtl5000";
 			reg = <0x0a>;
-			VDDA-supply = <&sys_3v3_reg>;
-			VDDIO-supply = <&sys_3v3_reg>;
+			VDDA-supply = <&reg_module_3v3_audio>;
+			VDDD-supply = <&reg_1v8_vio>;
+			VDDIO-supply = <&reg_module_3v3>;
 			clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
 		};
 
-		pmic: tps65911@2d {
+		pmic: pmic@2d {
 			compatible = "ti,tps65911";
 			reg = <0x2d>;
 
@@ -475,43 +865,38 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 
-			vcc1-supply = <&sys_3v3_reg>;
-			vcc2-supply = <&sys_3v3_reg>;
-			vcc3-supply = <&vio_reg>;
-			vcc4-supply = <&sys_3v3_reg>;
-			vcc5-supply = <&sys_3v3_reg>;
-			vcc6-supply = <&vio_reg>;
-			vcc7-supply = <&charge_pump_5v0_reg>;
-			vccio-supply = <&sys_3v3_reg>;
+			vcc1-supply = <&reg_module_3v3>;
+			vcc2-supply = <&reg_module_3v3>;
+			vcc3-supply = <&reg_1v8_vio>;
+			vcc4-supply = <&reg_module_3v3>;
+			vcc5-supply = <&reg_module_3v3>;
+			vcc6-supply = <&reg_1v8_vio>;
+			vcc7-supply = <&reg_5v0_charge_pump>;
+			vccio-supply = <&reg_module_3v3>;
 
 			regulators {
-				/* SW1: +V1.35_VDDIO_DDR */
 				vdd1_reg: vdd1 {
-					regulator-name = "vddio_ddr_1v35";
+					regulator-name = "+V1.35_VDDIO_DDR";
 					regulator-min-microvolt = <1350000>;
 					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
 				};
 
-				/* SW2: +V1.05 */
 				vdd2_reg: vdd2 {
-					regulator-name =
-						"vdd_pexa,vdd_pexb,vdd_sata";
+					regulator-name = "+V1.05";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
 				};
 
-				/* SW CTRL: +V1.0_VDD_CPU */
 				vddctrl_reg: vddctrl {
-					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-name = "+V1.0_VDD_CPU";
 					regulator-min-microvolt = <1150000>;
 					regulator-max-microvolt = <1150000>;
 					regulator-always-on;
 				};
 
-				/* SWIO: +V1.8 */
-				vio_reg: vio {
-					regulator-name = "vdd_1v8_gen";
+				reg_1v8_vio: vio {
+					regulator-name = "+V1.8";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
@@ -521,27 +906,24 @@
 
 				/*
 				 * EN_+V3.3 switching via FET:
-				 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
-				 * see also v3_3 fixed supply
+				 * +V3.3_AUDIO_AVDD_S, +V3.3
+				 * see also +V3.3 fixed supply
 				 */
 				ldo2_reg: ldo2 {
-					regulator-name = "en_3v3";
+					regulator-name = "EN_+V3.3";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 				};
 
-				/* +V1.2_CSI */
 				ldo3_reg: ldo3 {
-					regulator-name =
-						"avdd_dsi_csi,pwrdet_mipi";
+					regulator-name = "+V1.2_CSI";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 				};
 
-				/* +V1.2_VDD_RTC */
 				ldo4_reg: ldo4 {
-					regulator-name = "vdd_rtc";
+					regulator-name = "+V1.2_VDD_RTC";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
@@ -549,10 +931,10 @@
 
 				/*
 				 * +V2.8_AVDD_VDAC:
-				 * only required for analog RGB
+				 * only required for (unsupported) analog RGB
 				 */
 				ldo5_reg: ldo5 {
-					regulator-name = "avdd_vdac";
+					regulator-name = "+V2.8_AVDD_VDAC";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 					regulator-always-on;
@@ -564,22 +946,20 @@
 				 * granularity
 				 */
 				ldo6_reg: ldo6 {
-					regulator-name = "avdd_plle";
+					regulator-name = "+V1.05_AVDD_PLLE";
 					regulator-min-microvolt = <1100000>;
 					regulator-max-microvolt = <1100000>;
 				};
 
-				/* +V1.2_AVDD_PLL */
 				ldo7_reg: ldo7 {
-					regulator-name = "avdd_pll";
+					regulator-name = "+V1.2_AVDD_PLL";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 				};
 
-				/* +V1.0_VDD_DDR_HS */
 				ldo8_reg: ldo8 {
-					regulator-name = "vdd_ddr_hs";
+					regulator-name = "+V1.0_VDD_DDR_HS";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
@@ -588,11 +968,10 @@
 		};
 
 		/* STMPE811 touch screen controller */
-		stmpe811@41 {
+		touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
-			interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
-			interrupt-parent = <&gpio>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
 			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
@@ -626,7 +1005,7 @@
 
 		/*
 		 * LM95245 temperature sensor
-		 * Note: OVERT_N directly connected to PMIC PWRDN
+		 * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
 		 */
 		temp-sensor@4c {
 			compatible = "national,lm95245";
@@ -634,7 +1013,7 @@
 		};
 
 		/* SW: +V1.2_VDD_CORE */
-		tps62362@60 {
+		regulator@60 {
 			compatible = "ti,tps62362";
 			reg = <0x60>;
 
@@ -659,7 +1038,7 @@
 			reg = <1>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_RISING>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
 			spi-max-frequency = <10000000>;
 		};
 	};
@@ -674,7 +1053,7 @@
 			reg = <0>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>;
+			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>;
 			spi-max-frequency = <10000000>;
 		};
 	};
@@ -688,6 +1067,18 @@
 		nvidia,core-pwr-off-time = <0>;
 		nvidia,core-power-req-active-high;
 		nvidia,sys-clock-req-active-high;
+
+		/* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x1>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
 	};
 
 	ahub@70080000 {
@@ -701,73 +1092,65 @@
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
+		vmmc-supply = <&reg_module_3v3>; /* VCC */
+		vqmmc-supply = <&reg_1v8_vio>; /* VCCQ */
+		mmc-ddr-1_8v;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	clk32k_in: xtal1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
 
-		clk32k_in: clk@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk16m: osc4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
 
-		clk16m: clk@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <16000000>;
-			clock-output-names = "clk16m";
-		};
+	reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.8_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_1v8_vio>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		avdd_hdmi_pll_1v8_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "+V1.8_AVDD_HDMI_PLL";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			enable-active-high;
-			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
-			vin-supply = <&vio_reg>;
-		};
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_module_3v3>;
+	};
 
-		sys_3v3_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_5v0_charge_pump: regulator-5v0-charge-pump {
+		compatible = "regulator-fixed";
+		regulator-name = "+V5.0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		avdd_hdmi_3v3_reg: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
-			regulator-name = "+V3.3_AVDD_HDMI";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		charge_pump_5v0_reg: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO_AVDD_S";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 16e1f387aa6d..5965150ecdd2 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -1,15 +1,17 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
 #include "tegra30-colibri.dtsi"
 
 / {
 	model = "Toradex Colibri T30 on Colibri Evaluation Board";
-	compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30";
+	compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30",
+		     "nvidia,tegra30";
 
 	aliases {
 		rtc0 = "/i2c@7000c000/rtc@68";
-		rtc1 = "/i2c@7000d000/tps65911@2d";
+		rtc1 = "/i2c@7000d000/pmic@2d";
 		rtc2 = "/rtc@7000e000";
 		serial0 = &uarta;
 		serial1 = &uartb;
@@ -27,22 +29,25 @@
 				nvidia,panel = <&panel>;
 			};
 		};
+
 		hdmi@54280000 {
 			status = "okay";
+			hdmi-supply = <&reg_5v0>;
 		};
 	};
 
+	/* Colibri UART-A */
 	serial@70006000 {
 		status = "okay";
 	};
 
+	/* Colibri UART-C */
 	serial@70006040 {
-		compatible = "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
 
+	/* Colibri UART-B */
 	serial@70006300 {
-		compatible = "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
 
@@ -65,8 +70,12 @@
 		};
 	};
 
+	/* GEN2_I2C: unused */
+
+	/* CAM_I2C (I2C3): unused */
+
 	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
-	hdmiddc: i2c@7000c700 {
+	i2c@7000c700 {
 		status = "okay";
 	};
 
@@ -74,18 +83,17 @@
 	spi@7000d400 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		can0: can@0 {
+
+		can@0 {
 			compatible = "microchip,mcp2515";
 			reg = <0>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_RISING>;
+			/* CAN_INT */
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_FALLING>;
 			spi-max-frequency = <10000000>;
-		};
-		spidev0: spi@1 {
-			compatible = "spidev";
-			reg = <1>;
-			spi-max-frequency = <25000000>;
+			vdd-supply = <&reg_3v3>;
+			xceiver-supply = <&reg_5v0>;
 		};
 	};
 
@@ -93,19 +101,19 @@
 	sdhci@78000200 {
 		status = "okay";
 		bus-width = <4>;
-		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
 		no-1-8-v;
 	};
 
 	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
 	usb@7d000000 {
 		status = "okay";
+		dr_mode = "otg";
 	};
 
 	usb-phy@7d000000 {
 		status = "okay";
-		dr_mode = "otg";
-		vbus-supply = <&usbc_vbus_reg>;
+		vbus-supply = <&reg_usbc_vbus>;
 	};
 
 	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
@@ -115,28 +123,23 @@
 
 	usb-phy@7d008000 {
 		status = "okay";
-		vbus-supply = <&usbh_vbus_reg>;
+		vbus-supply = <&reg_usbh_vbus>;
 	};
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-
-		/* PWM<A> */
-		pwms = <&pwm 0 5000000>;
 		brightness-levels = <255 128 64 32 16 8 4 0>;
 		default-brightness-level = <6>;
 		/* BL_ON */
 		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 0 5000000>; /* PWM<A> */
 	};
 
-	clocks {
-		clk16m: clk@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <16000000>;
-			clock-output-names = "clk16m";
-		};
+	clk16m: osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
 	};
 
 	gpio-keys {
@@ -157,58 +160,39 @@
 		 * edt,et070080dh6: EDT 7.0" LCD TFT
 		 */
 		compatible = "edt,et057090dhu", "simple-panel";
-
 		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
 	};
 
-	pwmleds {
-		compatible = "pwm-leds";
-
-		pwmb {
-			label = "PWM<B>";
-			pwms = <&pwm 1 19600>;
-			max-brightness = <255>;
-		};
-		pwmc {
-			label = "PWM<C>";
-			pwms = <&pwm 2 19600>;
-			max-brightness = <255>;
-		};
-		pwmd {
-			label = "PWM<D>";
-			pwms = <&pwm 3 19600>;
-			max-brightness = <255>;
-		};
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 
-	regulators {
-		sys_5v0_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
 
-		usbc_vbus_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usbc_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			vin-supply = <&sys_5v0_reg>;
-		};
+	reg_usbc_vbus: regulator-usbc-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB5";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v0>;
+	};
 
-		/* USBH_PEN */
-		usbh_vbus_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usbh_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
-			vin-supply = <&sys_5v0_reg>;
-		};
+	/* USBH_PEN resp. USB_P_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 526ed71cf7a3..35af03ca9e90 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -1,27 +1,22 @@
 // SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/input/input.h>
 #include "tegra30.dtsi"
 
 /*
  * Toradex Colibri T30 Module Device Tree
- * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E; IT: V1.1A
+ * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E, V1.1F; IT: V1.1A, V1.1B
  */
 / {
-	model = "Toradex Colibri T30";
-	compatible = "toradex,colibri_t30", "nvidia,tegra30";
-
 	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
 
 	host1x@50000000 {
 		hdmi@54280000 {
-			vdd-supply = <&avdd_hdmi_3v3_reg>;
-			pll-supply = <&avdd_hdmi_pll_1v8_reg>;
-
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
 			nvidia,hpd-gpio =
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
-			nvidia,ddc-i2c-bus = <&hdmiddc>;
+			pll-supply = <&reg_1v8_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
 		};
 	};
 
@@ -31,23 +26,173 @@
 
 		state_default: pinmux {
 			/* Analogue Audio (On-module) */
-			clk1_out_pw4 {
+			clk1-out-pw4 {
 				nvidia,pins = "clk1_out_pw4";
 				nvidia,function = "extperiph1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			dap3_fs_pp0 {
-				nvidia,pins =	"dap3_fs_pp0",
-						"dap3_sclk_pp3",
-						"dap3_din_pp1",
-						"dap3_dout_pp2";
+			dap3-fs-pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+					      "dap3_sclk_pp3",
+					      "dap3_din_pp1",
+					      "dap3_dout_pp2";
 				nvidia,function = "i2s2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
+			/* Colibri Address/Data Bus (GMI) */
+			gmi-ad0-pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+					      "gmi_ad2_pg2",
+					      "gmi_ad3_pg3",
+					      "gmi_ad4_pg4",
+					      "gmi_ad5_pg5",
+					      "gmi_ad6_pg6",
+					      "gmi_ad7_pg7",
+					      "gmi_ad8_ph0",
+					      "gmi_ad9_ph1",
+					      "gmi_ad10_ph2",
+					      "gmi_ad11_ph3",
+					      "gmi_ad12_ph4",
+					      "gmi_ad13_ph5",
+					      "gmi_ad14_ph6",
+					      "gmi_ad15_ph7",
+					      "gmi_adv_n_pk0",
+					      "gmi_clk_pk1",
+					      "gmi_cs4_n_pk2",
+					      "gmi_cs2_n_pk3",
+					      "gmi_iordy_pi5",
+					      "gmi_oe_n_pi1",
+					      "gmi_wait_pi7",
+					      "gmi_wr_n_pi0",
+					      "dap1_fs_pn0",
+					      "dap1_din_pn1",
+					      "dap1_dout_pn2",
+					      "dap1_sclk_pn3",
+					      "dap2_fs_pa2",
+					      "dap2_sclk_pa3",
+					      "dap2_din_pa4",
+					      "dap2_dout_pa5",
+					      "spi1_sck_px5",
+					      "spi1_mosi_px4",
+					      "spi1_cs0_n_px6",
+					      "spi2_cs0_n_px3",
+					      "spi2_miso_px1",
+					      "spi2_mosi_px0",
+					      "spi2_sck_px2",
+					      "uart2_cts_n_pj5",
+					      "uart2_rts_n_pj6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Further pins may be used as GPIOs */
+			dap4-din-pp5 {
+				nvidia,pins = "dap4_din_pp5",
+					      "dap4_dout_pp6",
+					      "dap4_fs_pp4",
+					      "dap4_sclk_pp7",
+					      "pbb7",
+					      "sdmmc1_clk_pz0",
+					      "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat3_py4",
+					      "uart3_cts_n_pa1",
+					      "uart3_txd_pw6",
+					      "uart3_rxd_pw7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-d18-pm2 {
+				nvidia,pins = "lcd_d18_pm2",
+					      "lcd_d19_pm3",
+					      "lcd_d20_pm4",
+					      "lcd_d21_pm5",
+					      "lcd_d22_pm6",
+					      "lcd_d23_pm7",
+					      "lcd_dc0_pn6",
+					      "pex_l2_clkreq_n_pcc7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-cs0-n-pn4 {
+				nvidia,pins = "lcd_cs0_n_pn4",
+					      "lcd_sdin_pz2",
+					      "pu0",
+					      "pu1",
+					      "pu2",
+					      "pu3",
+					      "pu4",
+					      "pu5",
+					      "pu6",
+					      "spi1_miso_px7",
+					      "uart3_rts_n_pc0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-pwr0-pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+					      "lcd_sck_pz4",
+					      "lcd_sdout_pn5",
+					      "lcd_wr_n_pz3";
+				nvidia,function = "hdcp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4",
+					      "pbb5",
+					      "pbb6";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Multiplexed RDnWR and therefore disabled */
+			lcd-cs1-n-pw0 {
+				nvidia,pins = "lcd_cs1_n_pw0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* Multiplexed GMI_CLK and therefore disabled */
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* Tri-stating GMI_WR_N on nPWE SODIMM pin 99 */
+			sdmmc3-dat4-pd1 {
+				nvidia,pins = "sdmmc3_dat4_pd1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* Not tri-stating GMI_WR_N on RDnWR SODIMM pin 93 */
+			sdmmc3-dat5-pd0 {
+				nvidia,pins = "sdmmc3_dat5_pd0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
 			/* Colibri BL_ON */
 			pv2 {
 				nvidia,pins = "pv2";
@@ -57,7 +202,7 @@
 			};
 
 			/* Colibri Backlight PWM<A> */
-			sdmmc3_dat3_pb4 {
+			sdmmc3-dat3-pb4 {
 				nvidia,pins = "sdmmc3_dat3_pb4";
 				nvidia,function = "pwm0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -65,7 +210,7 @@
 			};
 
 			/* Colibri CAN_INT */
-			kb_row8_ps0 {
+			kb-row8-ps0 {
 				nvidia,pins = "kb_row8_ps0";
 				nvidia,function = "kbc";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -73,26 +218,133 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 
+			/* Colibri DDC */
+			ddc-scl-pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri EXT_IO* */
+			gen2-i2c-scl-pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "rsvd4";
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spdif-in-pk6 {
+				nvidia,pins =	"spdif_in_pk6";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri GPIO */
+			clk2-out-pw5 {
+				nvidia,pins = "clk2_out_pw5",
+					      "pcc2",
+					      "pv3",
+					      "sdmmc1_dat2_py5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-pwr1-pc1 {
+				nvidia,pins = "lcd_pwr1_pc1",
+					      "pex_l1_clkreq_n_pdd6",
+					      "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri HOTPLUG_DETECT (HDMI) */
+			hdmi-int-pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri I2C */
+			gen1-i2c-scl-pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri LCD (L_* resp. LDD<*>) */
+			lcd-d0-pe0 {
+				nvidia,pins = "lcd_d0_pe0",
+					      "lcd_d1_pe1",
+					      "lcd_d2_pe2",
+					      "lcd_d3_pe3",
+					      "lcd_d4_pe4",
+					      "lcd_d5_pe5",
+					      "lcd_d6_pe6",
+					      "lcd_d7_pe7",
+					      "lcd_d8_pf0",
+					      "lcd_d9_pf1",
+					      "lcd_d10_pf2",
+					      "lcd_d11_pf3",
+					      "lcd_d12_pf4",
+					      "lcd_d13_pf5",
+					      "lcd_d14_pf6",
+					      "lcd_d15_pf7",
+					      "lcd_d16_pm0",
+					      "lcd_d17_pm1",
+					      "lcd_de_pj1",
+					      "lcd_hsync_pj3",
+					      "lcd_pclk_pb3",
+					      "lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
 			/*
 			 * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
-			 * todays display need DE, disable LCD_M1
+			 * today's display need DE, disable LCD_M1
 			 */
-			lcd_m1_pw1 {
+			lcd-m1-pw1 {
 				nvidia,pins = "lcd_m1_pw1";
 				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
 
 			/* Colibri MMC */
-			kb_row10_ps2 {
+			kb-row10-ps2 {
 				nvidia,pins = "kb_row10_ps2";
 				nvidia,function = "sdmmc2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
-			kb_row11_ps3 {
+			kb-row11-ps3 {
 				nvidia,pins = "kb_row11_ps3",
 					      "kb_row12_ps4",
 					      "kb_row13_ps5",
@@ -102,9 +354,108 @@
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
+			/* Colibri MMC_CD */
+			gmi-wp-n-pc7 {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Multiplexed and therefore disabled */
+			cam-mclk-pcc0 {
+				nvidia,pins =	"cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam-i2c-scl-pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0",
+					      "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri nRESET_OUT */
+			gmi-rst-n-pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * Colibri Parallel Camera (Optional)
+			 * pins multiplexed with others and therefore disabled
+			 */
+			vi-vsync-pd6 {
+				nvidia,pins = "vi_d0_pt4",
+					      "vi_d1_pd5",
+					      "vi_d2_pl0",
+					      "vi_d3_pl1",
+					      "vi_d4_pl2",
+					      "vi_d5_pl3",
+					      "vi_d6_pl4",
+					      "vi_d7_pl5",
+					      "vi_d8_pl6",
+					      "vi_d9_pl7",
+					      "vi_d10_pt2",
+					      "vi_d11_pt3",
+					      "vi_hsync_pd7",
+					      "vi_mclk_pt1",
+					      "vi_pclk_pt0",
+					      "vi_vsync_pd6";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri PWM<B> */
+			sdmmc3-dat2-pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri PWM<C> */
+			sdmmc3-clk-pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri PWM<D> */
+			sdmmc3-cmd-pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
 
 			/* Colibri SSP */
-			ulpi_clk_py0 {
+			ulpi-clk-py0 {
 				nvidia,pins = "ulpi_clk_py0",
 					      "ulpi_dir_py1",
 					      "ulpi_nxt_py2",
@@ -113,16 +464,18 @@
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
-			sdmmc3_dat6_pd3 {
+			/* Multiplexed SSPFRM, SSPTXD and therefore disabled */
+			sdmmc3-dat6-pd3 {
 				nvidia,pins = "sdmmc3_dat6_pd3",
 					      "sdmmc3_dat7_pd4";
 				nvidia,function = "spdif";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
 
-			/* Colibri UART_A */
-			ulpi_data0 {
+			/* Colibri UART-A */
+			ulpi-data0 {
 				nvidia,pins = "ulpi_data0_po1",
 					      "ulpi_data1_po2",
 					      "ulpi_data2_po3",
@@ -136,8 +489,8 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			/* Colibri UART_B */
-			gmi_a16_pj7 {
+			/* Colibri UART-B */
+			gmi-a16-pj7 {
 				nvidia,pins = "gmi_a16_pj7",
 					      "gmi_a17_pb0",
 					      "gmi_a18_pb1",
@@ -147,8 +500,8 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			/* Colibri UART_C */
-			uart2_rxd {
+			/* Colibri UART-C */
+			uart2-rxd {
 				nvidia,pins = "uart2_rxd_pc3",
 					      "uart2_txd_pc2";
 				nvidia,function = "uartb";
@@ -156,15 +509,53 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			/* eMMC */
-			sdmmc4_clk_pcc4 {
+			/* Colibri USBC_DET */
+			spdif-out-pk5 {
+				nvidia,pins =	"spdif_out_pk5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri USBH_PEN */
+			spi2-cs1-n-pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri USBH_OC */
+			spi2-cs2-n-pw3, {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri VGA not supported and therefore disabled */
+			crt-hsync-pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+					      "crt_vsync_pv7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* eMMC (On-module) */
+			sdmmc4-clk-pcc4 {
 				nvidia,pins = "sdmmc4_clk_pcc4",
+					      "sdmmc4_cmd_pt7",
 					      "sdmmc4_rst_n_pcc3";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
-			sdmmc4_dat0_paa0 {
+			sdmmc4-dat0-paa0 {
 				nvidia,pins = "sdmmc4_dat0_paa0",
 					      "sdmmc4_dat1_paa1",
 					      "sdmmc4_dat2_paa2",
@@ -176,17 +567,111 @@
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* LAN_EXT_WAKEUP#, LAN_PME (On-module) */
+			pex-l0-rst-n-pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1",
+					      "pex_wake_n_pdd3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* LAN_V_BUS, LAN_RESET# (On-module) */
+			pex-l0-clkreq-n-pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2",
+					      "pex_l0_prsnt_n_pdd0";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* nBATT_FAULT(SENSE), nVDD_FAULT(SENSE) */
+			pex-l2-rst-n-pcc6 {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+					      "pex_l2_prsnt_n_pdd7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Not connected and therefore disabled */
+			clk1-req-pee2 {
+				nvidia,pins = "clk1_req_pee2",
+					      "pex_l1_prsnt_n_pdd4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2-req-pcc5 {
+				nvidia,pins = "clk2_req_pcc5",
+					      "clk3_out_pee0",
+					      "clk3_req_pee1",
+					      "clk_32k_out_pa0",
+					      "hdmi_cec_pee3",
+					      "sys_clk_req_pz5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-dqs-pi2 {
+				nvidia,pins = "gmi_dqs_pi2",
+					      "kb_col2_pq2",
+					      "kb_col3_pq3",
+					      "kb_col4_pq4",
+					      "kb_col5_pq5",
+					      "kb_row4_pr4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col0-pq0 {
+				nvidia,pins = "kb_col0_pq0",
+					      "kb_col1_pq1",
+					      "kb_col6_pq6",
+					      "kb_col7_pq7",
+					      "kb_row5_pr5",
+					      "kb_row6_pr6",
+					      "kb_row7_pr7",
+					      "kb_row9_ps1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0",
+					      "kb_row1_pr1",
+					      "kb_row2_pr2",
+					      "kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd-pwr2-pc6 {
+				nvidia,pins = "lcd_pwr2_pc6";
+				nvidia,function = "hdcp";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
 
 			/* Power I2C (On-module) */
-			pwr_i2c_scl_pz6 {
+			pwr-i2c-scl-pz6 {
 				nvidia,pins = "pwr_i2c_scl_pz6",
 					      "pwr_i2c_sda_pz7";
 				nvidia,function = "i2cpwr";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
 				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
 			};
 
@@ -195,15 +680,15 @@
 			 * temperature sensor therefore requires disabling for
 			 * now
 			 */
-			lcd_dc1_pd2 {
+			lcd-dc1-pd2 {
 				nvidia,pins = "lcd_dc1_pd2";
 				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
 
-			/* TOUCH_PEN_INT# */
+			/* TOUCH_PEN_INT# (On-module) */
 			pv0 {
 				nvidia,pins = "pv0";
 				nvidia,function = "rsvd1";
@@ -214,13 +699,21 @@
 		};
 	};
 
-	hdmiddc: i2c@7000c700 {
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra30-hsuart";
+	};
+
+	hdmi_ddc: i2c@7000c700 {
 		clock-frequency = <10000>;
 	};
 
 	/*
 	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
-	 * touch screen controller
+	 * touch screen controller (On-module)
 	 */
 	i2c@7000d000 {
 		status = "okay";
@@ -230,12 +723,13 @@
 		sgtl5000: codec@a {
 			compatible = "fsl,sgtl5000";
 			reg = <0x0a>;
-			VDDA-supply = <&sys_3v3_reg>;
-			VDDIO-supply = <&sys_3v3_reg>;
+			VDDA-supply = <&reg_module_3v3_audio>;
+			VDDD-supply = <&reg_1v8_vio>;
+			VDDIO-supply = <&reg_module_3v3>;
 			clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
 		};
 
-		pmic: tps65911@2d {
+		pmic: pmic@2d {
 			compatible = "ti,tps65911";
 			reg = <0x2d>;
 
@@ -248,19 +742,18 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 
-			vcc1-supply = <&sys_3v3_reg>;
-			vcc2-supply = <&sys_3v3_reg>;
-			vcc3-supply = <&vio_reg>;
-			vcc4-supply = <&sys_3v3_reg>;
-			vcc5-supply = <&sys_3v3_reg>;
-			vcc6-supply = <&vio_reg>;
-			vcc7-supply = <&charge_pump_5v0_reg>;
-			vccio-supply = <&sys_3v3_reg>;
+			vcc1-supply = <&reg_module_3v3>;
+			vcc2-supply = <&reg_module_3v3>;
+			vcc3-supply = <&reg_1v8_vio>;
+			vcc4-supply = <&reg_module_3v3>;
+			vcc5-supply = <&reg_module_3v3>;
+			vcc6-supply = <&reg_1v8_vio>;
+			vcc7-supply = <&reg_5v0_charge_pump>;
+			vccio-supply = <&reg_module_3v3>;
 
 			regulators {
-				/* SW1: +V1.35_VDDIO_DDR */
 				vdd1_reg: vdd1 {
-					regulator-name = "vddio_ddr_1v35";
+					regulator-name = "+V1.35_VDDIO_DDR";
 					regulator-min-microvolt = <1350000>;
 					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
@@ -268,17 +761,15 @@
 
 				/* SW2: unused */
 
-				/* SW CTRL: +V1.0_VDD_CPU */
 				vddctrl_reg: vddctrl {
-					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-name = "+V1.0_VDD_CPU";
 					regulator-min-microvolt = <1150000>;
 					regulator-max-microvolt = <1150000>;
 					regulator-always-on;
 				};
 
-				/* SWIO: +V1.8 */
-				vio_reg: vio {
-					regulator-name = "vdd_1v8_gen";
+				reg_1v8_vio: vio {
+					regulator-name = "+V1.8";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
@@ -289,10 +780,10 @@
 				/*
 				 * EN_+V3.3 switching via FET:
 				 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
-				 * see also 3v3 fixed supply
+				 * see also +V3.3 fixed supply
 				 */
 				ldo2_reg: ldo2 {
-					regulator-name = "en_3v3";
+					regulator-name = "EN_+V3.3";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
@@ -300,9 +791,8 @@
 
 				/* LDO3: unused */
 
-				/* +V1.2_VDD_RTC */
 				ldo4_reg: ldo4 {
-					regulator-name = "vdd_rtc";
+					regulator-name = "+V1.2_VDD_RTC";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
@@ -310,10 +800,10 @@
 
 				/*
 				 * +V2.8_AVDD_VDAC:
-				 * only required for analog RGB
+				 * only required for (unsupported) analog RGB
 				 */
 				ldo5_reg: ldo5 {
-					regulator-name = "avdd_vdac";
+					regulator-name = "+V2.8_AVDD_VDAC";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 					regulator-always-on;
@@ -325,22 +815,20 @@
 				 * granularity
 				 */
 				ldo6_reg: ldo6 {
-					regulator-name = "avdd_plle";
+					regulator-name = "+V1.05_AVDD_PLLE";
 					regulator-min-microvolt = <1100000>;
 					regulator-max-microvolt = <1100000>;
 				};
 
-				/* +V1.2_AVDD_PLL */
 				ldo7_reg: ldo7 {
-					regulator-name = "avdd_pll";
+					regulator-name = "+V1.2_AVDD_PLL";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 				};
 
-				/* +V1.0_VDD_DDR_HS */
 				ldo8_reg: ldo8 {
-					regulator-name = "vdd_ddr_hs";
+					regulator-name = "+V1.0_VDD_DDR_HS";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
@@ -349,11 +837,10 @@
 		};
 
 		/* STMPE811 touch screen controller */
-		stmpe811@41 {
+		touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
-			interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
-			interrupt-parent = <&gpio>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
 			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
@@ -387,7 +874,7 @@
 
 		/*
 		 * LM95245 temperature sensor
-		 * Note: OVERT_N directly connected to PMIC PWRDN
+		 * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
 		 */
 		temp-sensor@4c {
 			compatible = "national,lm95245";
@@ -395,7 +882,7 @@
 		};
 
 		/* SW: +V1.2_VDD_CORE */
-		tps62362@60 {
+		regulator@60 {
 			compatible = "ti,tps62362";
 			reg = <0x60>;
 
@@ -419,6 +906,18 @@
 		nvidia,core-pwr-off-time = <0>;
 		nvidia,core-power-req-active-high;
 		nvidia,sys-clock-req-active-high;
+
+		/* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x1>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
 	};
 
 	ahub@70080000 {
@@ -432,75 +931,85 @@
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
+		vmmc-supply = <&reg_module_3v3>; /* VCC */
+		vqmmc-supply = <&reg_1v8_vio>; /* VCCQ */
+		mmc-ddr-1_8v;
 	};
 
-	/* EHCI instance 1: USB2_DP/N -> AX88772B */
+	/* EHCI instance 1: USB2_DP/N -> AX88772B (On-module) */
 	usb@7d004000 {
 		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		asix@1 {
+			reg = <1>;
+			local-mac-address = [00 00 00 00 00 00];
+		};
 	};
 
 	usb-phy@7d004000 {
 		status = "okay";
-		nvidia,is-wired = <1>;
+		vbus-supply = <&reg_lan_v_bus>;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	clk32k_in: xtal1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
 
-		clk32k_in: clk@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.8_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_1v8_vio>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_module_3v3>;
+	};
 
-		avdd_hdmi_pll_1v8_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "+V1.8_AVDD_HDMI_PLL";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			enable-active-high;
-			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
-			vin-supply = <&vio_reg>;
-		};
+	reg_5v0_charge_pump: regulator-5v0-charge-pump {
+		compatible = "regulator-fixed";
+		regulator-name = "+V5.0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		sys_3v3_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_lan_v_bus: regulator-lan-v-bus {
+		compatible = "regulator-fixed";
+		regulator-name = "LAN_V_BUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+	};
 
-		avdd_hdmi_3v3_reg: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
-			regulator-name = "+V3.3_AVDD_HDMI";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		charge_pump_5v0_reg: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO_AVDD_S";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	sound {
@@ -519,3 +1028,12 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };
+
+&gpio {
+	lan-reset-n {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LAN_RESET#";
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index a6781f653310..d2b553f76719 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -896,7 +896,7 @@
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <1>;
 		nvidia,xcvr-lsrslew = <1>;
 		nvidia,xcvr-hsslew = <32>;
@@ -933,7 +933,7 @@
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
 		nvidia,xcvr-hsslew = <32>;
@@ -969,7 +969,7 @@
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
 		nvidia,xcvr-hsslew = <32>;
@@ -1013,5 +1013,9 @@
 			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&{/cpus/cpu@0}>,
+				     <&{/cpus/cpu@1}>,
+				     <&{/cpus/cpu@2}>,
+				     <&{/cpus/cpu@3}>;
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts
index 21407e159bf7..3aaca10f6644 100644
--- a/arch/arm/boot/dts/uniphier-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts
@@ -63,6 +63,10 @@
 	status = "okay";
 };
 
+&sd {
+	status = "okay";
+};
+
 &usb0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index 37950ad2de7c..b73d594b6dcd 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -63,6 +63,17 @@
 			cache-level = <2>;
 		};
 
+		spi: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
 		serial0: serial@54006800 {
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
@@ -224,6 +235,40 @@
 			};
 		};
 
+		sd: sdhc@5a400000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a400000 0x200>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&mio_clk 0>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 0>, <&mio_rst 3>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+
+		emmc: sdhc@5a500000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a500000 0x200>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&mio_clk 1>;
+			reset-names = "host", "bridge", "hw";
+			resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+			non-removable;
+		};
+
 		usb0: usb@5a800100 {
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
@@ -347,7 +392,8 @@
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand2cs>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};
diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
index a0a44a422e12..3d9080ee7aef 100644
--- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
@@ -65,6 +65,10 @@
 	status = "okay";
 };
 
+&sd {
+	status = "okay";
+};
+
 &eth {
 	status = "okay";
 	phy-handle = <&ethphy>;
@@ -76,6 +80,14 @@
 	};
 };
 
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
 &nand {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
index 51f0e69f49fd..1fee5ffbfb9c 100644
--- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -121,11 +121,36 @@
 		function = "sd";
 	};
 
+	pinctrl_sd_uhs: sd-uhs {
+		groups = "sd";
+		function = "sd";
+	};
+
 	pinctrl_sd1: sd1 {
 		groups = "sd1";
 		function = "sd1";
 	};
 
+	pinctrl_spi0: spi0 {
+		groups = "spi0";
+		function = "spi0";
+	};
+
+	pinctrl_spi1: spi1 {
+		groups = "spi1";
+		function = "spi1";
+	};
+
+	pinctrl_spi2: spi2 {
+		groups = "spi2";
+		function = "spi2";
+	};
+
+	pinctrl_spi3: spi3 {
+		groups = "spi3";
+		function = "spi3";
+	};
+
 	pinctrl_system_bus: system-bus {
 		groups = "system_bus", "system_bus_cs1";
 		function = "system_bus";
diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts
index db1b08935ae5..92cc48dd86d0 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ace.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts
@@ -68,6 +68,10 @@
 	status = "okay";
 };
 
+&sd {
+	status = "okay";
+};
+
 &usb2 {
 	status = "okay";
 };
@@ -86,3 +90,11 @@
 		reg = <1>;
 	};
 };
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts
index efb084983b82..28038b17bbb3 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts
@@ -65,6 +65,10 @@
 	status = "okay";
 };
 
+&sd {
+	status = "okay";
+};
+
 &usb2 {
 	status = "okay";
 };
@@ -84,6 +88,14 @@
 	};
 };
 
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
 &nand {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/uniphier-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
index dac4d6679a32..dda1a2f214a8 100644
--- a/arch/arm/boot/dts/uniphier-pro4-sanji.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
@@ -71,6 +71,10 @@
 	status = "okay";
 };
 
+&emmc {
+	status = "okay";
+};
+
 &eth {
 	status = "okay";
 	phy-handle = <&ethphy>;
@@ -81,3 +85,11 @@
 		reg = <1>;
 	};
 };
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index 49539f035219..0beb606cf3c8 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -71,6 +71,17 @@
 			cache-level = <2>;
 		};
 
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
 		serial0: serial@54006800 {
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
@@ -258,6 +269,54 @@
 			};
 		};
 
+		sd: sdhc@5a400000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a400000 0x200>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&mio_clk 0>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 0>, <&mio_rst 3>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+
+		emmc: sdhc@5a500000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a500000 0x200>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&mio_clk 1>;
+			reset-names = "host", "bridge", "hw";
+			resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+			non-removable;
+		};
+
+		sd1: sdhc@5a600000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a600000 0x200>;
+			interrupts = <0 85 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sd1>;
+			clocks = <&mio_clk 2>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 2>, <&mio_rst 5>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+		};
+
 		usb2: usb@5a800100 {
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
@@ -269,6 +328,8 @@
 				 <&mio_clk 12>;
 			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
 				 <&mio_rst 12>;
+			phy-names = "usb";
+			phys = <&usb_phy0>;
 			has-transaction-translator;
 		};
 
@@ -283,6 +344,8 @@
 				 <&mio_clk 13>;
 			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
 				 <&mio_rst 13>;
+			phy-names = "usb";
+			phys = <&usb_phy1>;
 			has-transaction-translator;
 		};
 
@@ -294,6 +357,34 @@
 			pinctrl: pinctrl {
 				compatible = "socionext,uniphier-pro4-pinctrl";
 			};
+
+			usb-phy {
+				compatible = "socionext,uniphier-pro4-usb2-phy";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb_phy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <0>;
+					vbus-supply = <&usb0_vbus>;
+				};
+
+				usb_phy3: phy@3 {
+					reg = <3>;
+					#phy-cells = <0>;
+					vbus-supply = <&usb1_vbus>;
+				};
+			};
 		};
 
 		soc-glue@5f900000 {
@@ -386,6 +477,101 @@
 			};
 		};
 
+		usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 134 4>, <0 135 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb0_rst 4>;
+			phys = <&usb_phy2>, <&usb0_ssphy>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-pro4-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x100>;
+
+			usb0_vbus: regulator@0 {
+				compatible = "socionext,uniphier-pro4-usb3-regulator";
+				reg = <0 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+
+			usb0_ssphy: ss-phy@10 {
+				compatible = "socionext,uniphier-pro4-usb3-ssphy";
+				reg = <0x10 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+				vbus-supply = <&usb0_vbus>;
+			};
+
+			usb0_rst: reset@40 {
+				compatible = "socionext,uniphier-pro4-usb3-reset";
+				reg = <0x40 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+		};
+
+		usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 137 4>, <0 138 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb1_rst 4>;
+			phys = <&usb_phy3>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65d00000 {
+			compatible = "socionext,uniphier-pro4-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x100>;
+
+			usb1_vbus: regulator@0 {
+				compatible = "socionext,uniphier-pro4-usb3-regulator";
+				reg = <0 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_rst: reset@40 {
+				compatible = "socionext,uniphier-pro4-usb3-reset";
+				reg = <0x40 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+		};
+
 		nand: nand@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5a";
 			status = "disabled";
@@ -394,7 +580,8 @@
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index 06c2cef91ec7..365738739412 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -156,6 +156,28 @@
 			cache-level = <3>;
 		};
 
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			interrupts = <0 216 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
 		serial0: serial@54006800 {
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
@@ -439,9 +461,44 @@
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand2cs>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
+
+		emmc: sdhc@68400000 {
+			compatible = "socionext,uniphier-sd-v3.1";
+			status = "disabled";
+			reg = <0x68400000 0x800>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&sd_clk 1>;
+			reset-names = "host", "hw";
+			resets = <&sd_rst 1>, <&sd_rst 6>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+			non-removable;
+		};
+
+		sd: sdhc@68800000 {
+			compatible = "socionext,uniphier-sd-v3.1";
+			status = "disabled";
+			reg = <0x68800000 0x800>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&sd_clk 0>;
+			reset-names = "host";
+			resets = <&sd_rst 0>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
index bed26b8ed9a3..e27fd4f2a569 100644
--- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
@@ -76,6 +76,10 @@
 	};
 };
 
+&emmc {
+	status = "okay";
+};
+
 &eth {
 	status = "okay";
 	phy-handle = <&ethphy>;
@@ -86,3 +90,11 @@
 		reg = <1>;
 	};
 };
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
index b13d2d16ddad..23fe42b7408b 100644
--- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
@@ -77,6 +77,10 @@
 	status = "okay";
 };
 
+&emmc {
+	status = "okay";
+};
+
 &eth {
 	status = "okay";
 	phy-handle = <&ethphy>;
@@ -87,3 +91,7 @@
 		reg = <1>;
 	};
 };
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index e2d1a22c5950..8d20e9548e39 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -167,6 +167,28 @@
 			cache-level = <2>;
 		};
 
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			interrupts = <0 216 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
 		serial0: serial@54006800 {
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
@@ -422,6 +444,40 @@
 			};
 		};
 
+		emmc: sdhc@5a000000 {
+			compatible = "socionext,uniphier-sd-v3.1.1";
+			status = "disabled";
+			reg = <0x5a000000 0x800>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&sd_clk 1>;
+			reset-names = "host", "hw";
+			resets = <&sd_rst 1>, <&sd_rst 6>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+			non-removable;
+		};
+
+		sd: sdhc@5a400000 {
+			compatible = "socionext,uniphier-sd-v3.1.1";
+			status = "disabled";
+			reg = <0x5a400000 0x800>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&sd_clk 0>;
+			reset-names = "host";
+			resets = <&sd_rst 0>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+
 		soc_glue: soc-glue@5f800000 {
 			compatible = "socionext,uniphier-pxs2-soc-glue",
 				     "simple-mfd", "syscon";
@@ -523,6 +579,186 @@
 			};
 		};
 
+		usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 134 4>, <0 135 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+			resets = <&usb0_rst 15>;
+			phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+			       <&usb0_ssphy0>, <&usb0_ssphy1>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-pxs2-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb0_rst: reset@0 {
+				compatible = "socionext,uniphier-pxs2-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_hsphy0: hs-phy@200 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_hsphy1: hs-phy@210 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus1>;
+			};
+
+			usb0_ssphy0: ss-phy@300 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 17>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_ssphy1: ss-phy@310 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x310 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 18>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 18>;
+				vbus-supply = <&usb0_vbus1>;
+			};
+		};
+
+		usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 137 4>, <0 138 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 15>, <&sys_clk 15>, <&sys_clk 15>;
+			resets = <&usb1_rst 15>;
+			phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65d00000 {
+			compatible = "socionext,uniphier-pxs2-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x400>;
+
+			usb1_rst: reset@0 {
+				compatible = "socionext,uniphier-pxs2-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_hsphy0: hs-phy@200 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 20>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+
+			usb1_hsphy1: hs-phy@210 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 20>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus1>;
+			};
+
+			usb1_ssphy0: ss-phy@300 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 21>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 21>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+		};
+
 		nand: nand@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5b";
 			status = "disabled";
@@ -531,7 +767,8 @@
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand2cs>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};
diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts
index fe386fa2ea4b..01bf94c6b93a 100644
--- a/arch/arm/boot/dts/uniphier-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts
@@ -63,6 +63,10 @@
 	status = "okay";
 };
 
+&sd {
+	status = "okay";
+};
+
 &usb0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index e9b9b4f3c558..f7fcf6b45995 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -63,6 +63,17 @@
 			cache-level = <2>;
 		};
 
+		spi: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
 		serial0: serial@54006800 {
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
@@ -228,6 +239,40 @@
 			};
 		};
 
+		sd: sdhc@5a400000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a400000 0x200>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&mio_clk 0>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 0>, <&mio_rst 3>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+
+		emmc: sdhc@5a500000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a500000 0x200>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&mio_clk 1>;
+			reset-names = "host", "bridge", "hw";
+			resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+			non-removable;
+		};
+
 		usb0: usb@5a800100 {
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
@@ -351,7 +396,8 @@
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand2cs>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 5f61d3609027..6f4f60ba5429 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -373,7 +373,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		ssp@101f4000 {
+		spi@101f4000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x101f4000 0x1000>;
 			interrupts = <11>;
diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi
index bbff0115e2fb..76a0949df4a8 100644
--- a/arch/arm/boot/dts/vf500.dtsi
+++ b/arch/arm/boot/dts/vf500.dtsi
@@ -1,43 +1,6 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
 
 #include "vfxxx.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index 6be7a828ae64..59fceea8805d 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -1,43 +1,6 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
 
 /dts-v1/;
 #include "vf610.dtsi"
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts
index 37777cf22e67..b76c3d0413df 100644
--- a/arch/arm/boot/dts/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
@@ -66,6 +66,15 @@
 		 regulator-min-microvolt = <3300000>;
 		 regulator-max-microvolt = <3300000>;
 	};
+
+	sff: sfp {
+		compatible = "sff,sff";
+		pinctrl-0 = <&pinctrl_optical>;
+		pinctrl-names = "default";
+		i2c-bus = <&i2c0>;
+		los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &adc0 {
@@ -113,6 +122,8 @@
 	non-removable;
 	no-1-8-v;
 	keep-power-in-suspend;
+	no-sdio;
+	no-sd;
 	status = "okay";
 };
 
@@ -120,6 +131,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
 	bus-width = <4>;
+	no-sdio;
 	status = "okay";
 };
 
@@ -170,6 +182,14 @@
 					label = "eth_cu_1000_3";
 				};
 
+				port@5 {
+					reg = <5>;
+					label = "eth_fc_1000_1";
+					phy-mode = "1000base-x";
+					managed = "in-band-status";
+					sfp = <&sff>;
+				};
+
 				port@6 {
 					reg = <6>;
 					label = "cpu";
@@ -289,6 +309,16 @@
 		>;
 	};
 
+	pinctrl_optical: optical-grp {
+		fsl,pins = <
+		/* SFF SD input */
+		VF610_PAD_PTE27__GPIO_132	0x3061
+
+		/* SFF Transmit disable output */
+		VF610_PAD_PTE13__GPIO_118	0x3043
+		>;
+	};
+
 	pinctrl_switch: switch-grp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98		0x3061
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index 0b1e94c6f25b..6f4a5602cefd 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -200,6 +200,13 @@
 						phy-handle = <&switch1phy4>;
 					};
 
+					port@9 {
+						reg = <9>;
+						label = "sff2";
+						phy-mode = "sgmii";
+						managed = "in-band-status";
+						sfp = <&sff2>;
+					};
 
 					switch1port10: port@10 {
 						reg = <10>;
@@ -245,6 +252,22 @@
 			#size-cells = <0>;
 		};
 	};
+
+	sff2: sff2 {
+		/* lower */
+		compatible = "sff,sff";
+		i2c-bus = <&sff2_i2c>;
+		los-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff3: sff3 {
+		/* upper */
+		compatible = "sff,sff";
+		i2c-bus = <&sff3_i2c>;
+		los-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &dspi0 {
@@ -329,13 +352,6 @@
 		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
 		gpio-controller;
 		interrupt-controller;
-
-		enet_swr_en {
-			gpio-hog;
-			gpios = <0 GPIO_ACTIVE_HIGH>;
-			output-high;
-			line-name = "enet-swr-en";
-		};
 	};
 
 	/*
@@ -378,26 +394,16 @@
 			reg = <0>;
 		};
 
-		i2c@1 {
+		sff2_i2c: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
-
-			sfp2: at24c04@50 {
-				compatible = "atmel,24c02";
-				reg = <0x50>;
-			};
 		};
 
-		i2c@2 {
+		sff3_i2c: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-
-			sfp3: at24c04@50 {
-				compatible = "atmel,24c02";
-				reg = <0x50>;
-			};
 		};
 
 		i2c@3 {
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 80fef182c672..7fd39817f8ab 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -1,43 +1,7 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
 
 #include "vf500.dtsi"
 
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index d392794d9c13..028e0ec30e0c 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -1,43 +1,6 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
 
 #include "vf610-pinfunc.h"
 #include <dt-bindings/clock/vf610-clock.h>
@@ -190,7 +153,7 @@
 				status = "disabled";
 			};
 
-			dspi0: dspi0@4002c000 {
+			dspi0: spi@4002c000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-dspi";
@@ -205,7 +168,7 @@
 				status = "disabled";
 			};
 
-			dspi1: dspi1@4002d000 {
+			dspi1: spi@4002d000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-dspi";
@@ -339,7 +302,7 @@
 				status = "disabled";
 			};
 
-			qspi0: quadspi@40044000 {
+			qspi0: spi@40044000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-qspi";
@@ -569,7 +532,7 @@
 				status = "disabled";
 			};
 
-			dspi2: dspi2@400ac000 {
+			dspi2: spi@400ac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-dspi";
@@ -584,7 +547,7 @@
 				status = "disabled";
 			};
 
-			dspi3: dspi3@400ad000 {
+			dspi3: spi@400ad000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-dspi";
@@ -665,7 +628,7 @@
 				status = "disabled";
 			};
 
-			qspi1: quadspi@400c4000 {
+			qspi1: spi@400c4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-qspi";
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index cc5a3dc2b4a0..27cd6cb52f1b 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -174,17 +174,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <7>;
-			hwmon@52 {
+			hwmon@34 {
 				compatible = "ti,ucd9248";
-				reg = <52>;
+				reg = <0x34>;
 			};
-			hwmon@53 {
+			hwmon@35 {
 				compatible = "ti,ucd9248";
-				reg = <53>;
+				reg = <0x35>;
 			};
-			hwmon@54 {
+			hwmon@36 {
 				compatible = "ti,ucd9248";
-				reg = <54>;
+				reg = <0x36>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts
index 0e1bfdd3421f..0dd352289a45 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts
@@ -68,7 +68,7 @@
 	status = "okay";
 	num-cs = <4>;
 	is-decoded-cs = <0>;
-	flash@0 {
+	flash@1 {
 		compatible = "sst25wf080", "jedec,spi-nor";
 		reg = <1>;
 		spi-max-frequency = <1000000>;
diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts
index 651913f1afa2..4ae2c85df3a0 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts
@@ -62,7 +62,7 @@
 	status = "okay";
 	num-cs = <4>;
 	is-decoded-cs = <0>;
-	eeprom: eeprom@0 {
+	eeprom: eeprom@2 {
 		at25,byte-len = <8192>;
 		at25,addr-mode = <2>;
 		at25,page-size = <32>;