diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2021-10-19 23:35:31 +0200 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2021-10-19 23:35:33 +0200 |
| commit | 4d3e49a3755c619e698625df2f31cc547b01f964 (patch) | |
| tree | 78bc9192c385b698418ac21c44121792041ad5a4 /arch/arm/boot | |
| parent | f202bd97c6893973ea1a12918125d70fe937d45e (diff) | |
| parent | 0f937bc2f2ab48f5ef494d86225ef952198b2240 (diff) | |
Merge tag 'arm-soc/for-5.16/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.16, please pull the following:
- Matthew provides a set of updates to the Northstar Plus Device Tree
files to fix a number of warnings, and prepare the files to support the
addition of the Cisco Meraki MX64/MX65 wireless controller devices and
finally adds support for those boards.
- Rafal continues to provide updates to the BCM5301X Device Tree files
in order to fix warnings with the various node names, MDIO muxes and
memory nodes. He also adds support for the external switches on the
BCM53573 SoC and adds Tenda AC9 switch ports.
- Christian provides the description of the Ethernet switch ports for
the Cisco Meraki MR32 based on the 53016 SoC
- Arinc adds support for the Asus RT-AC88U device based on the BCM4709
and featuring 8 Ethernet ports over the integrated and the external
Realtek switch (not supported yet)
- Stefan adds support for the Raspberry Pi Compute Module 4 IO board and
does a number of preparatory changes to get there to the Device Tree
files before doing the actual addition
* tag 'arm-soc/for-5.16/devicetree' of https://github.com/Broadcom/stblinux: (31 commits)
arm64: dts: broadcom: Add reference to RPi CM4 IO Board
ARM: dts: Add Raspberry Pi Compute Module 4 IO Board
ARM: dts: Add Raspberry Pi Compute Module 4
dt-bindings: arm: bcm2835: Add Raspberry Pi Compute Module 4
ARM: dts: bcm283x-rpi: Move Wifi/BT into separate dtsi
dt-bindings: display: bcm2835: add optional property power-domains
ARM: dts: BCM5301X: Add DT for Asus RT-AC88U
ARM: BCM53016: MR32: get mac-address from nvmem
ARM: BCM53016: Specify switch ports for Meraki MR32
ARM: dts: BCM53573: Add Tenda AC9 switch ports
ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch
ARM: dts: BCM5301X: Specify switch ports for more devices
ARM: dts: NSP: Fix MX65 MDIO mux warnings
ARM: dts: NSP: Fix MX64/MX65 eeprom node name
ARM: dts: NSP: Fix MDIO mux node names
ARM: dts: NSP: Fix mpcore, mmc node names
ARM: dts: NSP: Add bcm958623hr board name to dts
ARM: dts: BCM5301X: Fix memory nodes names
ARM: dts: BCM5301X: Fix MDIO mux binding
ARM: dts: BCM5301X: Fix nodes names
...
Link: https://lore.kernel.org/r/20211013174016.831348-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm/boot')
48 files changed, 1745 insertions, 172 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e1ee31389e2e..73ed0b4bb2ac 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -94,6 +94,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2837-rpi-cm3-io3.dtb \ bcm2711-rpi-400.dtb \ bcm2711-rpi-4-b.dtb \ + bcm2711-rpi-cm4-io.dtb \ bcm2835-rpi-zero.dtb \ bcm2835-rpi-zero-w.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ @@ -119,6 +120,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4709-netgear-r7000.dtb \ bcm4709-netgear-r8000.dtb \ bcm4709-tplink-archer-c9-v1.dtb \ + bcm47094-asus-rt-ac88u.dtb \ bcm47094-dlink-dir-885l.dtb \ bcm47094-linksys-panamera.dtb \ bcm47094-luxul-abr-4500.dtb \ @@ -159,6 +161,12 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \ bcm958525xmc.dtb \ bcm958622hr.dtb \ bcm958623hr.dtb \ + bcm958625-meraki-mx64.dtb \ + bcm958625-meraki-mx64-a0.dtb \ + bcm958625-meraki-mx64w.dtb \ + bcm958625-meraki-mx64w-a0.dtb \ + bcm958625-meraki-mx65.dtb \ + bcm958625-meraki-mx65w.dtb \ bcm958625hr.dtb \ bcm988312hr.dtb \ bcm958625k.dtb diff --git a/arch/arm/boot/dts/bcm-nsp-ax.dtsi b/arch/arm/boot/dts/bcm-nsp-ax.dtsi new file mode 100644 index 000000000000..f2e941dbab10 --- /dev/null +++ b/arch/arm/boot/dts/bcm-nsp-ax.dtsi @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom Northstar Plus Ax stepping-specific bindings. + * Notable differences from B0+ are the secondary-boot-reg and + * lack of DMA coherency. + */ + +&cpu1 { + secondary-boot-reg = <0xffff042c>; +}; + +&dma { + /delete-property/ dma-coherent; +}; + +&sdio { + /delete-property/ dma-coherent; +}; + +&amac0 { + /delete-property/ dma-coherent; +}; + +&amac1 { + /delete-property/ dma-coherent; +}; + +&amac2 { + /delete-property/ dma-coherent; +}; + +&ehci0 { + /delete-property/ dma-coherent; +}; + +&mailbox { + /delete-property/ dma-coherent; +}; + +&xhci { + /delete-property/ dma-coherent; +}; + +&ehci0 { + /delete-property/ dma-coherent; +}; + +&ohci0 { + /delete-property/ dma-coherent; +}; + +&i2c0 { + /delete-property/ dma-coherent; +}; + +&sata { + /delete-property/ dma-coherent; +}; + +&pcie0 { + /delete-property/ dma-coherent; +}; + +&pcie1 { + /delete-property/ dma-coherent; +}; + +&pcie2 { + /delete-property/ dma-coherent; +}; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 748df7955ae6..1c08daa18858 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -77,7 +77,7 @@ interrupt-affinity = <&cpu0>, <&cpu1>; }; - mpcore@19000000 { + mpcore-bus@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; @@ -166,7 +166,7 @@ }; }; - axi@18000000 { + axi: axi@18000000 { compatible = "simple-bus"; ranges = <0x00000000 0x18000000 0x0011c40c>; #address-cells = <1>; @@ -219,7 +219,7 @@ status = "disabled"; }; - sdio: sdhci@21000 { + sdio: mmc@21000 { compatible = "brcm,sdhci-iproc-cygnus"; reg = <0x21000 0x100>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; @@ -310,6 +310,7 @@ num-cs = <2>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; xhci: usb@29000 { @@ -362,6 +363,42 @@ status = "disabled"; }; + mdio: mdio@32000 { + compatible = "brcm,iproc-mdio"; + reg = <0x32000 0x8>; + #size-cells = <0>; + #address-cells = <1>; + }; + + mdio-mux@32000 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + reg = <0x32000 0x4>; + mux-mask = <0x200>; + #address-cells = <1>; + #size-cells = <0>; + mdio-parent-bus = <&mdio>; + + mdio_int: mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + usb3_phy: usb3-phy@10 { + compatible = "brcm,ns-bx-usb3-phy"; + reg = <0x10>; + usb3-dmp-syscon = <&usb3_dmp>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + mdio_ext: mdio@200 { + reg = <0x200>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + rng: rng@33000 { compatible = "brcm,bcm-nsp-rng"; reg = <0x33000 0x14>; @@ -520,13 +557,8 @@ }; }; - usb3_phy: usb3-phy@104000 { - compatible = "brcm,ns-bx-usb3-phy"; - reg = <0x104000 0x1000>, - <0x032000 0x1000>; - reg-names = "dmp", "ccb-mii"; - #phy-cells = <0>; - status = "disabled"; + usb3_dmp: syscon@104000 { + reg = <0x104000 0x1000>; }; }; diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index f24bdd0870a5..f94cac76713a 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -3,6 +3,7 @@ #include "bcm2711.dtsi" #include "bcm2711-rpi.dtsi" #include "bcm283x-rpi-usb-peripheral.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" / { compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; @@ -26,11 +27,6 @@ }; }; - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; - }; - sd_io_1v8_reg: sd_io_1v8_reg { compatible = "regulator-gpio"; regulator-name = "vdd-sd-io"; @@ -56,6 +52,10 @@ }; }; +&bt { + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; +}; + &ddc0 { status = "okay"; }; @@ -178,23 +178,6 @@ status = "okay"; }; -/* SDHCI is used to control the SDIO for wireless */ -&sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio34>; - bus-width = <4>; - non-removable; - mmc-pwrseq = <&wifi_pwrseq>; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - /* EMMC2 is used to drive the SD card */ &emmc2 { vqmmc-supply = <&sd_io_1v8_reg>; @@ -236,13 +219,6 @@ pinctrl-names = "default"; pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; - }; }; /* uart1 is mapped to the pin header */ @@ -259,3 +235,7 @@ &vec { status = "disabled"; }; + +&wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts new file mode 100644 index 000000000000..19600b629be5 --- /dev/null +++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2711-rpi-cm4.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + model = "Raspberry Pi Compute Module 4 IO Board"; + + leds { + led-act { + gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; + }; + + led-pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; + }; +}; + +&ddc0 { + status = "okay"; +}; + +&ddc1 { + status = "okay"; +}; + +&gpio { + /* + * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "RGMII_MDIO", + "RGMIO_MDC", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + /* Shared with SPI flash */ + "PWM0_MISO", + "PWM1_MOSI", + "STATUS_LED_G_CLK", + "SPIFLASH_CE_N", + "SDA0", + "SCL0", + "RGMII_RXCLK", + "RGMII_RXCTL", + "RGMII_RXD0", + "RGMII_RXD1", + "RGMII_RXD2", + "RGMII_RXD3", + "RGMII_TXCLK", + "RGMII_TXCTL", + "RGMII_TXD0", + "RGMII_TXD1", + "RGMII_TXD2", + "RGMII_TXD3"; +}; + +&hdmi0 { + status = "okay"; +}; + +&hdmi1 { + status = "okay"; +}; + +&genet { + status = "okay"; +}; + +&pixelvalve0 { + status = "okay"; +}; + +&pixelvalve1 { + status = "okay"; +}; + +&pixelvalve2 { + status = "okay"; +}; + +&pixelvalve4 { + status = "okay"; +}; + +&vc4 { + status = "okay"; +}; + +&vec { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi b/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi new file mode 100644 index 000000000000..a2954d466a73 --- /dev/null +++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2711.dtsi" +#include "bcm2711-rpi.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" + +/ { + compatible = "raspberrypi,4-compute-module", "brcm,bcm2711"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + sd_io_1v8_reg: sd_io_1v8_reg { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1>, + <3300000 0x0>; + status = "okay"; + }; + + sd_vcc_reg: sd_vcc_reg { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&bt { + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; +}; + +/* EMMC2 is used to drive the eMMC */ +&emmc2 { + bus-width = <8>; + vqmmc-supply = <&sd_io_1v8_reg>; + vmmc-supply = <&sd_vcc_reg>; + broken-cd; + /* Even the IP block is limited to 100 MHz + * this provides a throughput gain + */ + mmc-hs200-1_8v; + status = "okay"; +}; + +&expgpio { + gpio-line-names = "BT_ON", + "WL_ON", + "PWR_LED_OFF", + "ANT1", + "VDD_SD_IO_SEL", + "CAM_GPIO", + "SD_PWR_ON", + "ANT2"; + + ant1: ant1-hog { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; + /* internal antenna enabled */ + output-high; + line-name = "ant1"; + }; + + ant2: ant2-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + /* external antenna disabled */ + output-low; + line-name = "ant2"; + }; +}; + +&genet { + phy-handle = <&phy1>; + phy-mode = "rgmii-rxid"; + status = "okay"; +}; + +&genet_mdio { + phy1: ethernet-phy@0 { + /* No PHY interrupt */ + reg = <0x0>; + }; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; + uart-has-rtscts; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; + +&wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 33b2b77aa47d..243236bc1e00 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -7,6 +7,7 @@ #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" #include "bcm283x-rpi-usb-otg.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" / { compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; @@ -27,11 +28,10 @@ gpios = <&gpio 47 GPIO_ACTIVE_LOW>; }; }; +}; - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>; - }; +&bt { + shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; }; &gpio { @@ -110,19 +110,7 @@ }; &sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>; - bus-width = <4>; - mmc-pwrseq = <&wifi_pwrseq>; - non-removable; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; }; &sdhost { @@ -135,13 +123,6 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; - }; }; &uart1 { @@ -149,3 +130,7 @@ pinctrl-0 = <&uart1_gpio14>; status = "okay"; }; + +&wifi_pwrseq { + reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts index 77099a7871b0..d73daf5bff1d 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts @@ -3,6 +3,7 @@ #include "bcm2837.dtsi" #include "bcm2836-rpi.dtsi" #include "bcm283x-rpi-usb-host.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" / { compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837"; @@ -130,28 +131,6 @@ status = "okay"; }; -/* - * SDHCI is used to control the SDIO for wireless - * - * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven - * by a single GPIO. We can't give GPIO control to one of the drivers, - * otherwise the other part would get unexpectedly disturbed. - */ -&sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio34>; - status = "okay"; - bus-width = <4>; - non-removable; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - /* SDHOST is used to drive the SD card */ &sdhost { pinctrl-names = "default"; @@ -160,16 +139,15 @@ bus-width = <4>; }; -/* uart0 communicates with the BT module */ +/* uart0 communicates with the BT module + * + * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven + * by a single GPIO. We can't give GPIO control to one of the drivers, + * otherwise the other part would get unexpectedly disturbed. + */ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - }; }; /* uart1 is mapped to the pin header */ diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts index 61010266ca9a..e12938baaf12 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts @@ -4,6 +4,7 @@ #include "bcm2836-rpi.dtsi" #include "bcm283x-rpi-lan7515.dtsi" #include "bcm283x-rpi-usb-host.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" / { compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837"; @@ -31,11 +32,10 @@ linux,default-trigger = "default-on"; }; }; +}; - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; - }; +&bt { + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; }; &firmware { @@ -137,23 +137,6 @@ status = "okay"; }; -/* SDHCI is used to control the SDIO for wireless */ -&sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio34>; - status = "okay"; - bus-width = <4>; - non-removable; - mmc-pwrseq = <&wifi_pwrseq>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - /* SDHOST is used to drive the SD card */ &sdhost { pinctrl-names = "default"; @@ -166,13 +149,6 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; - }; }; /* uart1 is mapped to the pin header */ @@ -181,3 +157,7 @@ pinctrl-0 = <&uart1_gpio14>; status = "okay"; }; + +&wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index dd4a48604097..42b5383b55d8 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -4,6 +4,7 @@ #include "bcm2836-rpi.dtsi" #include "bcm283x-rpi-smsc9514.dtsi" #include "bcm283x-rpi-usb-host.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" / { compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; @@ -24,11 +25,10 @@ gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>; }; }; +}; - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; - }; +&bt { + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; }; &firmware { @@ -134,13 +134,6 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; - }; }; /* uart1 is mapped to the pin header */ @@ -150,23 +143,6 @@ status = "okay"; }; -/* SDHCI is used to control the SDIO for wireless */ -&sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio34>; - status = "okay"; - bus-width = <4>; - non-removable; - mmc-pwrseq = <&wifi_pwrseq>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - /* SDHOST is used to drive the SD card */ &sdhost { pinctrl-names = "default"; @@ -174,3 +150,7 @@ status = "okay"; bus-width = <4>; }; + +&wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi b/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi new file mode 100644 index 000000000000..0b64cc19941f --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + }; +}; + +/* SDHCI is used to control the SDIO for wireless */ +&sdhci { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&wifi_pwrseq>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + status = "okay"; + + bt: bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 61c7b137607e..43a5d675dd67 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -20,7 +20,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x08000000>; @@ -94,3 +94,40 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index d857751ec507..d00495a8b6fc 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -117,3 +117,40 @@ }; }; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index 6c6bb7b17d27..7546c8d07bcd 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x08000000>; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index d29e7f80ea6a..beae9eab9cb8 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x18000000>; diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts index 9b6887d477d8..7879f7d7d9c3 100644 --- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts @@ -16,7 +16,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x08000000>; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index 7989a53597d4..56d309dbc6b0 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x08000000>; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index 87b655be674c..89f992af61d1 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -30,7 +30,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x08000000>; @@ -187,3 +187,45 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@8 { + reg = <8>; + label = "cpu"; + ethernet = <&gmac2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index f806be5da723..c2a266a439d0 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -15,7 +15,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts new file mode 100644 index 000000000000..448060561cd0 --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2021 Arınç ÜNAL <arinc.unal@arinc9.com> + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708"; + model = "Asus RT-AC88U"; + + chosen { + bootargs = "earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x00180000>; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "white:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + wan-red { + label = "red:wan"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + lan { + label = "white:lan"; + gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; + }; + + usb2 { + label = "white:usb2"; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + usb3 { + label = "white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port1>, <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + wps { + label = "white:wps"; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "Wi-Fi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + }; + + led { + label = "Backlight"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&srab { + compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; + status = "okay"; + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + sw0_p5: port@5 { + reg = <5>; + label = "extsw"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@7 { + reg = <7>; + ethernet = <&gmac1>; + label = "cpu"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@8 { + reg = <8>; + ethernet = <&gmac2>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&usb3_phy { + status = "okay"; +}; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + partition@80000 { + label = "nvram"; + reg = <0x00080000 0x00180000>; + }; + + partition@200000 { + label = "firmware"; + reg = <0x00200000 0x07e00000>; + compatible = "brcm,trx"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index a6e2aeb28675..60bfd52ee677 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -118,3 +118,45 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@8 { + reg = <8>; + label = "cpu"; + ethernet = <&gmac2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index 05d4f2931772..9bef6b9bfa8d 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -129,7 +129,7 @@ }; }; - mdio-bus-mux@18003000 { + mdio-mux@18003000 { /* BIT(9) = 1 => external mdio */ mdio@200 { diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts index 4b8117f32d26..b51a0ee7e584 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts @@ -68,3 +68,40 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "wan"; + }; + + port@1 { + reg = <1>; + label = "lan4"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + }; + + port@4 { + reg = <4>; + label = "lan1"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts index 5fecce0422c7..b959a9504eea 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts @@ -68,3 +68,40 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "wan"; + }; + + port@1 { + reg = <1>; + label = "lan4"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + }; + + port@4 { + reg = <4>; + label = "lan1"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts index 452b8d0ab180..b0d8a688141d 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts @@ -16,7 +16,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x18000000>; diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts index 049cdfd92706..07eb3a8287d6 100644 --- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts @@ -105,3 +105,40 @@ }; }; }; + +&switch { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "wan"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts index 3b978dc8997a..64f973e1ef12 100644 --- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts @@ -20,7 +20,7 @@ bootargs = " console=ttyS0,115200n8 earlycon"; }; - memory { + memory@0 { reg = <0x00000000 0x08000000>; device_type = "memory"; }; @@ -110,6 +110,12 @@ reg = <0x50>; pagesize = <32>; read-only; + #address-cells = <1>; + #size-cells = <1>; + + mac_address: mac-address@66 { + reg = <0x66 0x6>; + }; }; }; }; @@ -133,6 +139,11 @@ */ }; +&gmac0 { + nvmem-cell-names = "mac-address"; + nvmem-cells = <&mac_address>; +}; + &gmac1 { status = "disabled"; }; @@ -195,3 +206,25 @@ }; }; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "poe"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + + fixed-link { + speed = <1000>; + duplex-full; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index f92089290ccd..d4f355015e3c 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -19,7 +19,7 @@ #size-cells = <1>; interrupt-parent = <&gic>; - chipcommonA@18000000 { + chipcommon-a-bus@18000000 { compatible = "simple-bus"; ranges = <0x00000000 0x18000000 0x00001000>; #address-cells = <1>; @@ -44,7 +44,7 @@ }; }; - mpcore@19000000 { + mpcore-bus@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; @@ -369,8 +369,8 @@ #address-cells = <1>; }; - mdio-bus-mux@18003000 { - compatible = "mdio-mux-mmioreg"; + mdio-mux@18003000 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; mdio-parent-bus = <&mdio>; #address-cells = <1>; #size-cells = <0>; @@ -415,7 +415,7 @@ status = "disabled"; }; - dmu@1800c000 { + dmu-bus@1800c000 { compatible = "simple-bus"; ranges = <0 0x1800c000 0x1000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index 51546fccc616..3f03a381db0f 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -180,6 +180,24 @@ gmac0: ethernet@5000 { reg = <0x5000 0x1000>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch: switch@1e { + compatible = "brcm,bcm53125"; + reg = <0x1e>; + + status = "disabled"; + + /* ports are defined in board DTS */ + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; }; gmac1: ethernet@b000 { diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts index 3d13e46c6949..d9eb2040b963 100644 --- a/arch/arm/boot/dts/bcm94708.dts +++ b/arch/arm/boot/dts/bcm94708.dts @@ -38,7 +38,7 @@ model = "NorthStar SVK (BCM94708)"; compatible = "brcm,bcm94708", "brcm,bcm4708"; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts index 5017b7b259cb..618c812eef73 100644 --- a/arch/arm/boot/dts/bcm94709.dts +++ b/arch/arm/boot/dts/bcm94709.dts @@ -38,7 +38,7 @@ model = "NorthStar SVK (BCM94709)"; compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708"; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index 1f73885ec274..60376b62cd5f 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM958522ER)"; - compatible = "brcm,bcm58522", "brcm,nsp"; + compatible = "brcm,bcm958522er", "brcm,bcm58522", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -134,6 +134,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index b6b9ca8b0972..8eeb319f5b54 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM958525ER)"; - compatible = "brcm,bcm58525", "brcm,nsp"; + compatible = "brcm,bcm958525er", "brcm,bcm58525", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -134,6 +134,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index ecf426f6ad5d..dc86d5a91292 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus XMC (BCM958525xmc)"; - compatible = "brcm,bcm58525", "brcm,nsp"; + compatible = "brcm,bcm958525xmc", "brcm,bcm58525", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -150,6 +150,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index 8ca18da981ad..c457e53d886e 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM958622HR)"; - compatible = "brcm,bcm58622", "brcm,nsp"; + compatible = "brcm,bcm958622hr", "brcm,bcm58622", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -138,6 +138,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index 9747378db531..c06871915a1c 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM958623HR)"; - compatible = "brcm,bcm58623", "brcm,nsp"; + compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -142,6 +142,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi new file mode 100644 index 000000000000..102acd85fab2 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi @@ -0,0 +1,281 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX65 series (Alamo). + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +#include "bcm958625-meraki-mx6x-common.dtsi" + +/ { + keys { + compatible = "gpio-keys-polled"; + autorepeat; + poll-interval = <20>; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpioa 8 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + /* green:wan1-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <0>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 25 GPIO_ACTIVE_LOW>; + }; + + led-1 { + /* green:wan1-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <1>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 24 GPIO_ACTIVE_LOW>; + }; + + led-2 { + /* green:wan2-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <2>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 27 GPIO_ACTIVE_LOW>; + }; + + led-3 { + /* green:wan2-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <3>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 26 GPIO_ACTIVE_LOW>; + }; + + led-4 { + /* amber:power */ + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_AMBER>; + gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led-5 { + /* white:status */ + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&axi { + mdio-mux@3f1c0 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + reg = <0x3f1c0 0x4>; + mux-mask = <0x2000>; + mdio-parent-bus = <&mdio_ext>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + phy_port6: phy@0 { + reg = <0>; + }; + + phy_port7: phy@1 { + reg = <1>; + }; + + phy_port8: phy@2 { + reg = <2>; + }; + + phy_port9: phy@3 { + reg = <3>; + }; + + phy_port10: phy@4 { + reg = <4>; + }; + + switch@10 { + compatible = "qca,qca8337"; + reg = <0x10>; + dsa,member = <1 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + ethernet = <&sgmii1>; + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan8"; + phy-handle = <&phy_port6>; + }; + + port@2 { + reg = <2>; + label = "lan9"; + phy-handle = <&phy_port7>; + }; + + port@3 { + reg = <3>; + label = "lan10"; + phy-handle = <&phy_port8>; + }; + + port@4 { + reg = <4>; + label = "lan11"; + phy-handle = <&phy_port9>; + }; + + port@5 { + reg = <5>; + label = "lan12"; + phy-handle = <&phy_port10>; + }; + }; + }; + }; + + mdio-mii@2000 { + reg = <0x2000>; + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + + switch@10 { + compatible = "qca,qca8337"; + reg = <0x10>; + dsa,member = <2 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + ethernet = <&sgmii0>; + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan3"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan4"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan5"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan6"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "lan7"; + phy-handle = <&phy_port5>; + }; + }; + }; + }; + }; +}; + +&srab { + compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; + status = "okay"; + dsa,member = <0 0>; + + ports { + port@0 { + label = "wan1"; + reg = <0>; + }; + + port@1 { + label = "wan2"; + reg = <1>; + }; + + sgmii0: port@4 { + label = "sw0"; + reg = <4>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + sgmii1: port@5 { + label = "sw1"; + reg = <5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@8 { + ethernet = <&amac2>; + reg = <8>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi new file mode 100644 index 000000000000..7c487c74fd10 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi @@ -0,0 +1,163 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin). + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +#include "bcm958625-meraki-mx6x-common.dtsi" + +/ { + + keys { + compatible = "gpio-keys-polled"; + autorepeat; + poll-interval = <20>; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpioa 6 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + /* green:lan1-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <0>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 19 GPIO_ACTIVE_LOW>; + }; + + led-1 { + /* green:lan1-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <1>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 18 GPIO_ACTIVE_LOW>; + }; + + led-2 { + /* green:lan2-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <2>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 24 GPIO_ACTIVE_LOW>; + }; + + led-3 { + /* green:lan2-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <3>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 20 GPIO_ACTIVE_LOW>; + }; + + led-4 { + /* green:lan3-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <4>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 26 GPIO_ACTIVE_LOW>; + }; + + led-5 { + /* green:lan3-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <5>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 25 GPIO_ACTIVE_LOW>; + }; + + led-6 { + /* green:lan4-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <6>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 28 GPIO_ACTIVE_LOW>; + }; + + led-7 { + /* green:lan4-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <7>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 27 GPIO_ACTIVE_LOW>; + }; + + led-8 { + /* green:wan-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <8>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 30 GPIO_ACTIVE_LOW>; + }; + + led-9 { + /* green:wan-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <9>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 29 GPIO_ACTIVE_LOW>; + }; + + led-a { + /* amber:power */ + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_AMBER>; + gpios = <&gpioa 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led-b { + /* white:status */ + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&srab { + compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; + status = "okay"; + + ports { + port@0 { + label = "lan1"; + reg = <0>; + }; + + port@1 { + label = "lan2"; + reg = <1>; + }; + + port@2 { + label = "lan3"; + reg = <2>; + }; + + port@3 { + label = "lan4"; + reg = <3>; + }; + + port@4 { + label = "wan"; + reg = <4>; + }; + + port@8 { + ethernet = <&amac2>; + reg = <8>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts new file mode 100644 index 000000000000..9944566c1195 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" +#include "bcm-nsp-ax.dtsi" + +/ { + model = "Cisco Meraki MX64(A0)"; + compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts new file mode 100644 index 000000000000..06939438e874 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" + +/ { + model = "Cisco Meraki MX64"; + compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts new file mode 100644 index 000000000000..112fddb1eed8 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" +#include "bcm-nsp-ax.dtsi" + +/ { + model = "Cisco Meraki MX64W(A0)"; + compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts new file mode 100644 index 000000000000..de2e367c3e78 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" + +/ { + model = "Cisco Meraki MX64W"; + compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts new file mode 100644 index 000000000000..d1b684dcdbfa --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX65. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-alamo.dtsi" + +/ { + model = "Cisco Meraki MX65"; + compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts new file mode 100644 index 000000000000..a2165aba3676 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX65W. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-alamo.dtsi" + +/ { + model = "Cisco Meraki MX65W"; + compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi new file mode 100644 index 000000000000..6519b7c61af1 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +#include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + pwm-leds { + compatible = "pwm-leds"; + + led-1 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + pwms = <&pwm 1 50000>; + max-brightness = <255>; + }; + + led-2 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + pwms = <&pwm 2 50000>; + max-brightness = <255>; + }; + + led-3 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + pwms = <&pwm 3 50000>; + max-brightness = <255>; + }; + }; +}; + +&amac2 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + read-only; + }; +}; + +&nand_controller { + nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "shmoo"; + reg = <0x80000 0x80000>; + read-only; + }; + + partition@100000 { + label = "bootkernel1"; + reg = <0x100000 0x300000>; + }; + + partition@400000 { + label = "nvram"; + reg = <0x400000 0x100000>; + }; + + partition@500000 { + label = "bootkernel2"; + reg = <0x500000 0x300000>; + }; + + partition@800000 { + label = "ubi"; + reg = <0x800000 0x3f700000>; + }; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_leds>; + + pwm_leds: pwm_leds { + function = "pwm"; + groups = "pwm1_grp", "pwm2_grp", "pwm3_grp"; + }; +}; + +&pwm { + status = "okay"; + #pwm-cells = <2>; +}; + +&uart0 { + clock-frequency = <62500000>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index 0f92b773afb8..b22fc6624ae4 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM958625HR)"; - compatible = "brcm,bcm58625", "brcm,nsp"; + compatible = "brcm,bcm958625hr", "brcm,bcm58625", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -149,6 +149,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 9e984ca0e6df..0183f8965a74 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -36,7 +36,7 @@ / { model = "NorthStar Plus SVK (BCM958625K)"; - compatible = "brcm,bcm58625", "brcm,nsp"; + compatible = "brcm,bcm958625k", "brcm,bcm58625", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -153,6 +153,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index 5475dab8181d..007e34715956 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM988312HR)"; - compatible = "brcm,bcm88312", "brcm,nsp"; + compatible = "brcm,bcm988312hr", "brcm,bcm88312", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -58,6 +58,10 @@ /* USB 3 support needed to be complete */ +&dma { + status = "okay"; +}; + &amac0 { status = "okay"; }; @@ -134,6 +138,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; |