diff options
| author | Helmut Grohne <helmut.grohne@intenta.de> | 2020-09-08 10:01:38 +0200 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2020-09-10 12:32:37 -0700 |
| commit | edecfa98f602a597666e3c5cab2677ada38d93c5 (patch) | |
| tree | 6348d2ca0afe83c6abe538e7566b1260fec60873 /arch/arm/boot | |
| parent | f612eb76f349919128d5f5cc4e8cc4251a16bf30 (diff) | |
net: dsa: microchip: look for phy-mode in port nodes
Documentation/devicetree/bindings/net/dsa/dsa.txt says that the phy-mode
property should be specified on port nodes. However, the microchip
drivers read it from the switch node.
Let the driver use the per-port property and fall back to the old
location with a warning.
Fix in-tree users.
Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de>
Link: https://lore.kernel.org/netdev/20200617082235.GA1523@laureti-dev/
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'arch/arm/boot')
| -rw-r--r-- | arch/arm/boot/dts/at91-sama5d2_icp.dts | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 8d19925fc09e..6783cf16ff81 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -116,7 +116,6 @@ switch0: ksz8563@0 { compatible = "microchip,ksz8563"; reg = <0>; - phy-mode = "mii"; reset-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_LOW>; spi-max-frequency = <500000>; @@ -140,6 +139,7 @@ reg = <2>; label = "cpu"; ethernet = <&macb0>; + phy-mode = "mii"; fixed-link { speed = <100>; full-duplex; |