summaryrefslogtreecommitdiff
path: root/arch/arm/kernel/head.S
diff options
context:
space:
mode:
authorRussell King <rmk+kernel@arm.linux.org.uk>2010-10-04 17:56:13 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2010-10-08 10:07:35 +0100
commit00945010c063b95e813b966f44bf58ffa1955a38 (patch)
treeb5f85a613747fb62c5f2e00d5aecd9a3c9fec69e /arch/arm/kernel/head.S
parent786f1b73f7d5cad5c88dc75a96d53a74160aa7d7 (diff)
ARM: hotplug cpu: move secondary_startup, __enable_mmu to cpuinit
Move these two functions, both of which are required for secondary CPU booting, into the cpuinit section. Ensure bad processors call __error_p for better diagnostics, rather than just __error. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/kernel/head.S')
-rw-r--r--arch/arm/kernel/head.S206
1 files changed, 104 insertions, 102 deletions
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 17414e299482..ed9ebe59178b 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -97,114 +97,14 @@ ENTRY(stext)
*/
ldr r13, =__mmap_switched @ address to jump to after
@ mmu has been enabled
- adr lr, BSYM(__enable_mmu) @ return (PIC) address
+ adr lr, BSYM(1f) @ return (PIC) address
ARM( add pc, r10, #PROCINFO_INITFUNC )
THUMB( add r12, r10, #PROCINFO_INITFUNC )
THUMB( mov pc, r12 )
+1: b __enable_mmu
ENDPROC(stext)
.ltorg
-#if defined(CONFIG_SMP)
-ENTRY(secondary_startup)
- /*
- * Common entry point for secondary CPUs.
- *
- * Ensure that we're in SVC mode, and IRQs are disabled. Lookup
- * the processor type - there is no need to check the machine type
- * as it has already been validated by the primary processor.
- */
- setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
- mrc p15, 0, r9, c0, c0 @ get processor id
- bl __lookup_processor_type
- movs r10, r5 @ invalid processor?
- moveq r0, #'p' @ yes, error 'p'
- beq __error
-
- /*
- * Use the page tables supplied from __cpu_up.
- */
- adr r4, __secondary_data
- ldmia r4, {r5, r7, r12} @ address to jump to after
- sub r4, r4, r5 @ mmu has been enabled
- ldr r4, [r7, r4] @ get secondary_data.pgdir
- adr lr, BSYM(__enable_mmu) @ return address
- mov r13, r12 @ __secondary_switched address
- ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor
- @ (return control reg)
- THUMB( add r12, r10, #PROCINFO_INITFUNC )
- THUMB( mov pc, r12 )
-ENDPROC(secondary_startup)
-
- /*
- * r6 = &secondary_data
- */
-ENTRY(__secondary_switched)
- ldr sp, [r7, #4] @ get secondary_data.stack
- mov fp, #0
- b secondary_start_kernel
-ENDPROC(__secondary_switched)
-
- .type __secondary_data, %object
-__secondary_data:
- .long .
- .long secondary_data
- .long __secondary_switched
-#endif /* defined(CONFIG_SMP) */
-
-
-
-/*
- * Setup common bits before finally enabling the MMU. Essentially
- * this is just loading the page table pointer and domain access
- * registers.
- */
-__enable_mmu:
-#ifdef CONFIG_ALIGNMENT_TRAP
- orr r0, r0, #CR_A
-#else
- bic r0, r0, #CR_A
-#endif
-#ifdef CONFIG_CPU_DCACHE_DISABLE
- bic r0, r0, #CR_C
-#endif
-#ifdef CONFIG_CPU_BPREDICT_DISABLE
- bic r0, r0, #CR_Z
-#endif
-#ifdef CONFIG_CPU_ICACHE_DISABLE
- bic r0, r0, #CR_I
-#endif
- mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
- domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
- domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
- domain_val(DOMAIN_IO, DOMAIN_CLIENT))
- mcr p15, 0, r5, c3, c0, 0 @ load domain access register
- mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
- b __turn_mmu_on
-ENDPROC(__enable_mmu)
-
-/*
- * Enable the MMU. This completely changes the structure of the visible
- * memory space. You will not be able to trace execution through this.
- * If you have an enquiry about this, *please* check the linux-arm-kernel
- * mailing list archives BEFORE sending another post to the list.
- *
- * r0 = cp#15 control register
- * r13 = *virtual* address to jump to upon completion
- *
- * other registers depend on the function called upon completion
- */
- .align 5
-__turn_mmu_on:
- mov r0, r0
- mcr p15, 0, r0, c1, c0, 0 @ write control reg
- mrc p15, 0, r3, c0, c0, 0 @ read id reg
- mov r3, r3
- mov r3, r13
- mov pc, r3
-__enable_mmu_end:
-ENDPROC(__turn_mmu_on)
-
-
/*
* Setup the initial page tables. We only setup the barest
* amount which are required to get the kernel running, which
@@ -349,4 +249,106 @@ __enable_mmu_loc:
.long __enable_mmu
.long __enable_mmu_end
+#if defined(CONFIG_SMP)
+ __CPUINIT
+ENTRY(secondary_startup)
+ /*
+ * Common entry point for secondary CPUs.
+ *
+ * Ensure that we're in SVC mode, and IRQs are disabled. Lookup
+ * the processor type - there is no need to check the machine type
+ * as it has already been validated by the primary processor.
+ */
+ setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
+ mrc p15, 0, r9, c0, c0 @ get processor id
+ bl __lookup_processor_type
+ movs r10, r5 @ invalid processor?
+ moveq r0, #'p' @ yes, error 'p'
+ beq __error_p
+
+ /*
+ * Use the page tables supplied from __cpu_up.
+ */
+ adr r4, __secondary_data
+ ldmia r4, {r5, r7, r12} @ address to jump to after
+ sub r4, r4, r5 @ mmu has been enabled
+ ldr r4, [r7, r4] @ get secondary_data.pgdir
+ adr lr, BSYM(__enable_mmu) @ return address
+ mov r13, r12 @ __secondary_switched address
+ ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor
+ @ (return control reg)
+ THUMB( add r12, r10, #PROCINFO_INITFUNC )
+ THUMB( mov pc, r12 )
+ENDPROC(secondary_startup)
+
+ /*
+ * r6 = &secondary_data
+ */
+ENTRY(__secondary_switched)
+ ldr sp, [r7, #4] @ get secondary_data.stack
+ mov fp, #0
+ b secondary_start_kernel
+ENDPROC(__secondary_switched)
+
+ .type __secondary_data, %object
+__secondary_data:
+ .long .
+ .long secondary_data
+ .long __secondary_switched
+#endif /* defined(CONFIG_SMP) */
+
+
+
+/*
+ * Setup common bits before finally enabling the MMU. Essentially
+ * this is just loading the page table pointer and domain access
+ * registers.
+ */
+__enable_mmu:
+#ifdef CONFIG_ALIGNMENT_TRAP
+ orr r0, r0, #CR_A
+#else
+ bic r0, r0, #CR_A
+#endif
+#ifdef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #CR_C
+#endif
+#ifdef CONFIG_CPU_BPREDICT_DISABLE
+ bic r0, r0, #CR_Z
+#endif
+#ifdef CONFIG_CPU_ICACHE_DISABLE
+ bic r0, r0, #CR_I
+#endif
+ mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
+ domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
+ domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
+ domain_val(DOMAIN_IO, DOMAIN_CLIENT))
+ mcr p15, 0, r5, c3, c0, 0 @ load domain access register
+ mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
+ b __turn_mmu_on
+ENDPROC(__enable_mmu)
+
+/*
+ * Enable the MMU. This completely changes the structure of the visible
+ * memory space. You will not be able to trace execution through this.
+ * If you have an enquiry about this, *please* check the linux-arm-kernel
+ * mailing list archives BEFORE sending another post to the list.
+ *
+ * r0 = cp#15 control register
+ * r13 = *virtual* address to jump to upon completion
+ *
+ * other registers depend on the function called upon completion
+ */
+ .align 5
+__turn_mmu_on:
+ mov r0, r0
+ mcr p15, 0, r0, c1, c0, 0 @ write control reg
+ mrc p15, 0, r3, c0, c0, 0 @ read id reg
+ mov r3, r3
+ mov r3, r13
+ mov pc, r3
+__enable_mmu_end:
+ENDPROC(__turn_mmu_on)
+
+
#include "head-common.S"