ARM: entry: avoid enabling interrupts in prefetch/data abort handlers

Avoid enabling interrupts if the parent context had interrupts enabled
in the abort handler assembly code, and move this into the breakpoint/
page/alignment fault handlers instead.

This gets rid of some special-casing for the breakpoint fault handlers
from the low level abort handler path.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

3 files changed, 24 insertions, 50 deletions

diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index d644d0240ad3..c46bafa2f6dc 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -185,20 +185,15 @@ ENDPROC(__und_invalid)
 __dabt_svc:
 	svc_entry
 
-	@
-	@ get ready to re-enable interrupts if appropriate
-	@
-	mrs	r9, cpsr
-	tst	r5, #PSR_I_BIT
-	biceq	r9, r9, #PSR_I_BIT
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	trace_hardirqs_off
+#endif
 
 	dabt_helper
 
 	@
-	@ set desired IRQ state, then call main handler
+	@ call main handler
 	@
-	debug_entry r1
-	msr	cpsr_c, r9
 	mov	r2, sp
 	bl	do_DataAbort
 
@@ -211,6 +206,12 @@ __dabt_svc:
 	@ restore SPSR and restart the instruction
 	@
 	ldr	r5, [sp, #S_PSR]
+#ifdef CONFIG_TRACE_IRQFLAGS
+	tst	r5, #PSR_I_BIT
+	bleq	trace_hardirqs_on
+	tst	r5, #PSR_I_BIT
+	blne	trace_hardirqs_off
+#endif
 	svc_exit r5				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__dabt_svc)
@@ -307,16 +308,11 @@ ENDPROC(__und_svc)
 __pabt_svc:
 	svc_entry
 
-	@
-	@ re-enable interrupts if appropriate
-	@
-	mrs	r9, cpsr
-	tst	r5, #PSR_I_BIT
-	biceq	r9, r9, #PSR_I_BIT
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	trace_hardirqs_off
+#endif
 
 	pabt_helper
-	debug_entry r1
-	msr	cpsr_c, r9			@ Maybe enable interrupts
 	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
 
@@ -329,6 +325,12 @@ __pabt_svc:
 	@ restore SPSR and restart the instruction
 	@
 	ldr	r5, [sp, #S_PSR]
+#ifdef CONFIG_TRACE_IRQFLAGS
+	tst	r5, #PSR_I_BIT
+	bleq	trace_hardirqs_on
+	tst	r5, #PSR_I_BIT
+	blne	trace_hardirqs_off
+#endif
 	svc_exit r5				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__pabt_svc)
@@ -412,11 +414,6 @@ __dabt_usr:
 	kuser_cmpxchg_check
 	dabt_helper
 
-	@
-	@ IRQs on, then call the main handler
-	@
-	debug_entry r1
-	enable_irq
 	mov	r2, sp
 	adr	lr, BSYM(ret_from_exception)
 	b	do_DataAbort
@@ -663,8 +660,6 @@ ENDPROC(__und_usr_unknown)
 __pabt_usr:
 	usr_entry
 	pabt_helper
-	debug_entry r1
-	enable_irq				@ Enable interrupts
 	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
  UNWIND(.fnend		)
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 051166c2a932..4d6ad8348e89 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -165,25 +165,6 @@
 	.endm
 #endif	/* !CONFIG_THUMB2_KERNEL */
 
-	@
-	@ Debug exceptions are taken as prefetch or data aborts.
-	@ We must disable preemption during the handler so that
-	@ we can access the debug registers safely.
-	@
-	.macro	debug_entry, fsr
-#if defined(CONFIG_HAVE_HW_BREAKPOINT) && defined(CONFIG_PREEMPT)
-	ldr	r4, =0x40f		@ mask out fsr.fs
-	and	r5, r4, \fsr
-	cmp	r5, #2			@ debug exception
-	bne	1f
-	get_thread_info r10
-	ldr	r6, [r10, #TI_PREEMPT]	@ get preempt count
-	add	r11, r6, #1		@ increment it
-	str	r11, [r10, #TI_PREEMPT]
-1:
-#endif
-	.endm
-
 /*
  * These are the registers used in the syscall handler, and allow us to
  * have in theory up to 7 arguments to a function - r0 to r6.
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 87acc25d7a3e..a927ca1f5566 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -796,7 +796,7 @@ unlock:
 
 /*
  * Called from either the Data Abort Handler [watchpoint] or the
- * Prefetch Abort Handler [breakpoint] with preemption disabled.
+ * Prefetch Abort Handler [breakpoint] with interrupts disabled.
  */
 static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 				 struct pt_regs *regs)
@@ -804,8 +804,10 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 	int ret = 0;
 	u32 dscr;
 
-	/* We must be called with preemption disabled. */
-	WARN_ON(preemptible());
+	preempt_disable();
+
+	if (interrupts_enabled(regs))
+		local_irq_enable();
 
 	/* We only handle watchpoints and hardware breakpoints. */
 	ARM_DBG_READ(c1, 0, dscr);
@@ -824,10 +826,6 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 		ret = 1; /* Unhandled fault. */
 	}
 
-	/*
-	 * Re-enable preemption after it was disabled in the
-	 * low-level exception handling code.
-	 */
 	preempt_enable();
 
 	return ret;