ARM: orion: remove unused board files

As planned earlier, all board support that was marked unused can be
removed now after nobody explicitly asked for these to be kept.

In particular, all of the reference designs get removed now, as these
are not commonly used productively any more. Also, the machines that
were not supported by Debian or the Debian_on_Buffalo group because of
limitations with RAM size are gone.

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

3 files changed, 0 insertions, 110 deletions

diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index 2252f465cafd..996888ffcfe7 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -18,14 +18,6 @@ if ARCH_DOVE
 config DOVE_LEGACY
 	bool
 
-config MACH_DOVE_DB
-	bool "Marvell DB-MV88AP510 Development Board"
-	select DOVE_LEGACY
-	select I2C_BOARDINFO if I2C
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell DB-MV88AP510 Development Board.
-
 config MACH_CM_A510
 	bool "CompuLab CM-A510 Board"
 	select DOVE_LEGACY
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index da373a5768ba..0d31390be069 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -4,5 +4,4 @@ ccflags-y := -I$(srctree)/arch/arm/plat-orion/include
 obj-y				+= common.o
 obj-$(CONFIG_DOVE_LEGACY)	+= irq.o mpp.o
 obj-$(CONFIG_PCI)		+= pcie.o
-obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
 obj-$(CONFIG_MACH_CM_A510)	+= cm-a510.o
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
deleted file mode 100644
index d5bf54040577..000000000000
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-dove/dove-db-setup.c
- *
- * Marvell DB-MV88AP510-BP Development Board Setup
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/timer.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/pci.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "dove.h"
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dove_db_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR_DEFAULT,
-};
-
-static struct mv_sata_platform_data dove_db_sata_data = {
-	.n_ports        = 1,
-};
-
-/*****************************************************************************
- * SPI Devices:
- * 	SPI0: 4M Flash ST-M25P32-VMF6P
- ****************************************************************************/
-static const struct flash_platform_data dove_db_spi_flash_data = {
-	.type		= "m25p64",
-};
-
-static struct spi_board_info __initdata dove_db_spi_flash_info[] = {
-	{
-		.modalias       = "m25p80",
-		.platform_data  = &dove_db_spi_flash_data,
-		.irq            = -1,
-		.max_speed_hz   = 20000000,
-		.bus_num        = 0,
-		.chip_select    = 0,
-	},
-};
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-static int __init dove_db_pci_init(void)
-{
-	if (machine_is_dove_db())
-		dove_pcie_init(1, 1);
-
-	return 0;
-}
-
-subsys_initcall(dove_db_pci_init);
-
-/*****************************************************************************
- * Board Init
- ****************************************************************************/
-static void __init dove_db_init(void)
-{
-	/*
-	 * Basic Dove setup. Needs to be called early.
-	 */
-	dove_init();
-
-	dove_ge00_init(&dove_db_ge00_data);
-	dove_ehci0_init();
-	dove_ehci1_init();
-	dove_sata_init(&dove_db_sata_data);
-	dove_sdio0_init();
-	dove_sdio1_init();
-	dove_spi0_init();
-	dove_spi1_init();
-	dove_uart0_init();
-	dove_uart1_init();
-	dove_i2c_init();
-	spi_register_board_info(dove_db_spi_flash_info,
-				ARRAY_SIZE(dove_db_spi_flash_info));
-}
-
-MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
-	.atag_offset	= 0x100,
-	.nr_irqs	= DOVE_NR_IRQS,
-	.init_machine	= dove_db_init,
-	.map_io		= dove_map_io,
-	.init_early	= dove_init_early,
-	.init_irq	= dove_init_irq,
-	.init_time	= dove_timer_init,
-	.restart	= dove_restart,
-MACHINE_END