summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx/src.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-05-07 11:02:18 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-05-07 11:02:18 -0700
commitfcba914542082b272f31c8e4c40000b88ed3208d (patch)
treefb28069bf571d93420daafd501b4e97f221d526c /arch/arm/mach-imx/src.c
parenta8c4b90e670be3b01e9395c7310639c8109fc77e (diff)
parent5c5f0421a8eea5bdaba9b9313c5bb4833aeb39cd (diff)
Merge tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates (part 3) from Arnd Bergmann: "This is the third and smallest of the SoC specific updates. Changes include: - SMP support for the Xilinx zynq platform - Smaller imx changes - LPAE support for mvebu - Moving the orion5x, kirkwood, dove and mvebu platforms to a common "mbus" driver for their internal devices. It would be good to get feedback on the location of the "mbus" driver. Since this is used on multiple platforms may potentially get shared with other architectures (powerpc and arm64), it was moved to drivers/bus/. We expect other similar drivers to get moved to the same place in order to avoid creating more top-level directories under drivers/ or cluttering up the messy drivers/misc/ even more." * tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: imx: reset_controller may be disabled ARM: mvebu: Align the internal registers virtual base to support LPAE ARM: mvebu: Limit the DMA zone when LPAE is selected arm: plat-orion: remove addr-map code arm: mach-mv78xx0: convert to use the mvebu-mbus driver arm: mach-orion5x: convert to use mvebu-mbus driver arm: mach-dove: convert to use mvebu-mbus driver arm: mach-kirkwood: convert to use mvebu-mbus driver arm: mach-mvebu: convert to use mvebu-mbus driver ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock ARM i.MX53: tve_di clock is not part of the CCM, but of TVE ARM i.MX53: make tve_ext_sel propagate rate change to PLL ARM i.MX53: Remove unused tve_gate clkdev entry ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree ARM: i.MX5: Add PATA and SRTC clocks ARM: imx: do not bring up unavailable cores ARM: imx: add initial imx6dl support ARM: imx1: mm: add call to mxc_device_init ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS ...
Diffstat (limited to 'arch/arm/mach-imx/src.c')
-rw-r--r--arch/arm/mach-imx/src.c66
1 files changed, 66 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 97d086889481..10a6b1a8c5ac 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -14,6 +14,7 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/reset-controller.h>
#include <linux/smp.h>
#include <asm/smp_plat.h>
#include "common.h"
@@ -21,10 +22,65 @@
#define SRC_SCR 0x000
#define SRC_GPR1 0x020
#define BP_SRC_SCR_WARM_RESET_ENABLE 0
+#define BP_SRC_SCR_SW_GPU_RST 1
+#define BP_SRC_SCR_SW_VPU_RST 2
+#define BP_SRC_SCR_SW_IPU1_RST 3
+#define BP_SRC_SCR_SW_OPEN_VG_RST 4
+#define BP_SRC_SCR_SW_IPU2_RST 12
#define BP_SRC_SCR_CORE1_RST 14
#define BP_SRC_SCR_CORE1_ENABLE 22
static void __iomem *src_base;
+static DEFINE_SPINLOCK(scr_lock);
+
+static const int sw_reset_bits[5] = {
+ BP_SRC_SCR_SW_GPU_RST,
+ BP_SRC_SCR_SW_VPU_RST,
+ BP_SRC_SCR_SW_IPU1_RST,
+ BP_SRC_SCR_SW_OPEN_VG_RST,
+ BP_SRC_SCR_SW_IPU2_RST
+};
+
+static int imx_src_reset_module(struct reset_controller_dev *rcdev,
+ unsigned long sw_reset_idx)
+{
+ unsigned long timeout;
+ unsigned long flags;
+ int bit;
+ u32 val;
+
+ if (!src_base)
+ return -ENODEV;
+
+ if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits))
+ return -EINVAL;
+
+ bit = 1 << sw_reset_bits[sw_reset_idx];
+
+ spin_lock_irqsave(&scr_lock, flags);
+ val = readl_relaxed(src_base + SRC_SCR);
+ val |= bit;
+ writel_relaxed(val, src_base + SRC_SCR);
+ spin_unlock_irqrestore(&scr_lock, flags);
+
+ timeout = jiffies + msecs_to_jiffies(1000);
+ while (readl(src_base + SRC_SCR) & bit) {
+ if (time_after(jiffies, timeout))
+ return -ETIME;
+ cpu_relax();
+ }
+
+ return 0;
+}
+
+static struct reset_control_ops imx_src_ops = {
+ .reset = imx_src_reset_module,
+};
+
+static struct reset_controller_dev imx_reset_controller = {
+ .ops = &imx_src_ops,
+ .nr_resets = ARRAY_SIZE(sw_reset_bits),
+};
void imx_enable_cpu(int cpu, bool enable)
{
@@ -32,9 +88,11 @@ void imx_enable_cpu(int cpu, bool enable)
cpu = cpu_logical_map(cpu);
mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
+ spin_lock(&scr_lock);
val = readl_relaxed(src_base + SRC_SCR);
val = enable ? val | mask : val & ~mask;
writel_relaxed(val, src_base + SRC_SCR);
+ spin_unlock(&scr_lock);
}
void imx_set_cpu_jump(int cpu, void *jump_addr)
@@ -61,9 +119,11 @@ void imx_src_prepare_restart(void)
u32 val;
/* clear enable bits of secondary cores */
+ spin_lock(&scr_lock);
val = readl_relaxed(src_base + SRC_SCR);
val &= ~(0x7 << BP_SRC_SCR_CORE1_ENABLE);
writel_relaxed(val, src_base + SRC_SCR);
+ spin_unlock(&scr_lock);
/* clear persistent entry register of primary core */
writel_relaxed(0, src_base + SRC_GPR1);
@@ -80,11 +140,17 @@ void __init imx_src_init(void)
src_base = of_iomap(np, 0);
WARN_ON(!src_base);
+ imx_reset_controller.of_node = np;
+ if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
+ reset_controller_register(&imx_reset_controller);
+
/*
* force warm reset sources to generate cold reset
* for a more reliable restart
*/
+ spin_lock(&scr_lock);
val = readl_relaxed(src_base + SRC_SCR);
val &= ~(1 << BP_SRC_SCR_WARM_RESET_ENABLE);
writel_relaxed(val, src_base + SRC_SCR);
+ spin_unlock(&scr_lock);
}