backlight: l4f00242t03: Convert to GPIO descriptors

This converts the l4f00242t03 backlight driver to use GPIO
descriptors and switches the two Freescale i.MX boards over
to passing descriptors instead of global GPIO numbers.

We use the typical names "enable" and "reset" as found in
the device tree bindings for panel GPIOs.

This saves a lot of code in the driver and makes it possible
to get rid of the platform data header altogether.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

2 files changed, 34 insertions, 11 deletions

diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 7b8325fb5b41..1da5f07952ac 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -13,6 +13,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/irq.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -20,8 +21,6 @@
 #include <linux/mfd/mc13783.h>
 #include <linux/spi/spi.h>
 #include <linux/regulator/machine.h>
-#include <linux/spi/l4f00242t03.h>
-
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -351,9 +350,19 @@ static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = {
 };
 
 /* LCD */
-static struct l4f00242t03_pdata mx27_3ds_lcd_pdata = {
-	.reset_gpio		= LCD_RESET,
-	.data_enable_gpio	= LCD_ENABLE,
+static struct gpiod_lookup_table mx27_3ds_lcd_gpiod_table = {
+	.dev_id = "spi0.0", /* Bus 0 chipselect 0 */
+	.table = {
+		/*
+		 * The i.MX27 has the i.MX21 GPIO controller, the GPIOs
+		 * numbered IMX_GPIO_NR(1, 3) and IMX_GPIO_NR(1, 31)
+		 * are in "bank 1" which is subtracted by one in the macro
+		 * so these are actually bank 0 on "imx21-gpio.0".
+		 */
+		GPIO_LOOKUP("imx21-gpio.0", 3, "reset", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("imx21-gpio.0", 31, "enable", GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
@@ -370,7 +379,6 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
 		.max_speed_hz	= 5000000,
 		.bus_num	= 0,
 		.chip_select	= 0, /* SS0 */
-		.platform_data	= &mx27_3ds_lcd_pdata,
 	},
 };
 
@@ -416,6 +424,7 @@ static void __init mx27pdk_late_init(void)
 	if (!otg_mode_host)
 		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 
+	gpiod_add_lookup_table(&mx27_3ds_lcd_gpiod_table);
 	mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT);
 	spi_register_board_info(mx27_3ds_spi_devs,
 				ARRAY_SIZE(mx27_3ds_spi_devs));
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 716d2ad51103..e81386190479 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -10,10 +10,10 @@
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/mc13783.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/l4f00242t03.h>
 #include <linux/regulator/machine.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -160,9 +160,23 @@ static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 };
 
 /* LCD */
-static struct l4f00242t03_pdata mx31_3ds_l4f00242t03_pdata = {
-	.reset_gpio		= IOMUX_TO_GPIO(MX31_PIN_LCS1),
-	.data_enable_gpio	= IOMUX_TO_GPIO(MX31_PIN_SER_RS),
+static struct gpiod_lookup_table mx31_3ds_lcd_gpiod_table = {
+	.dev_id = "spi0.2", /* Bus 0 chipselect 2 */
+	.table = {
+		/*
+		 * "reset" has IOMUX_TO_GPIO(IOMUX_PIN(88, 28)).
+		 * The macro only shifts 88 to bits 9..16 and then
+		 * mask it and shift it back. The GPIO number is 88.
+		 * 88 is 2*32+24
+		 */
+		GPIO_LOOKUP("imx31-gpio.2", 24, "reset", GPIO_ACTIVE_HIGH),
+		/*
+		 * Same reasoning as above for
+		 * IOMUX_TO_GPIO(IOMUX_PIN(89, 27), pin 89 is 2*32+25.
+		 */
+		GPIO_LOOKUP("imx31-gpio.2", 25, "enable", GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 /*
@@ -387,7 +401,6 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
 		.max_speed_hz	= 5000000,
 		.bus_num	= 0,
 		.chip_select	= 2, /* SS2 */
-		.platform_data	= &mx31_3ds_l4f00242t03_pdata,
 	},
 };
 
@@ -566,6 +579,7 @@ static void __init mx31_3ds_init(void)
 
 static void __init mx31_3ds_late(void)
 {
+	gpiod_add_lookup_table(&mx31_3ds_lcd_gpiod_table);
 	mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
 	spi_register_board_info(mx31_3ds_spi_devs,
 				ARRAY_SIZE(mx31_3ds_spi_devs));