Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

   - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
     automotive SoC similar to the ⅹ8a7795 chip we already support, but
     the dts changes rely on a clock driver change that has been merged
     for v4.9 through the clk tree.

   - The Amlogic meson-gxbb (S905) platform gains support for a few
     drivers merged through our tree, in particular the network and usb
     driver changes are required and included here, and also the clk
     tree changes.

   - The Allwinner platforms have seen a large-scale change to their clk
     drivers and the dts file updates must come after that. This
     includes the newly added Nextthing GR8 platform, which is derived
     from sun5i/A13.

   - Some integrator (arm32) changes rely on clk driver changes.

   - A single patch for lpc32xx has no such dependency but wasn't added
     until just before the merge window"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  ARM: dts: lpc32xx: add device node for IRAM on-chip memory
  ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03
  ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
  ARM: dts: sun8i: add pinmux for UART1 at PG
  dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC
  dts: sun8i-h3: add pinmux definitions for I2C0-2
  dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards
  dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux
  dts: sun8i-h3: add pinmux definitions for UART2-3
  ARM: dts: sun9i: a80-optimus: Disable EHCI1
  ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
  ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
  ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h
  ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes
  ...

1 files changed, 0 insertions, 36 deletions

diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index c7bb83205f5b..23b98fd414bf 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -17,33 +17,19 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/string.h>
 #include <linux/syscore_ops.h>
 #include <linux/amba/bus.h>
-#include <linux/amba/kmi.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
-#include <linux/platform_data/clk-integrator.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <linux/stat.h>
 #include <linux/termios.h>
 
-#include <asm/setup.h>
-#include <asm/param.h>		/* HZ */
-#include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 #include "hardware.h"
 #include "cm.h"
@@ -68,14 +54,8 @@ static void __iomem *ebi_base;
 
 /*
  * Logical      Physical
- * ef000000			Cache flush
- * f1100000	11000000	System controller registers
- * f1300000	13000000	Counter/Timer
  * f1400000	14000000	Interrupt controller
  * f1600000	16000000	UART 0
- * f1700000	17000000	UART 1
- * f1a00000	1a000000	Debug LEDs
- * f1b00000	1b000000	GPIO
  */
 
 static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
@@ -89,16 +69,6 @@ static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
 		.pfn		= __phys_to_pfn(INTEGRATOR_UART0_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_DBG_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_DBG_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_AP_GPIO_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_AP_GPIO_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
 	}
 };
 
@@ -196,16 +166,10 @@ static void __init ap_init_irq_of(void)
 
 /* For the Device Tree, add in the UART callbacks as AUXDATA */
 static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
-		"rtc", NULL),
 	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
 		"uart0", &ap_uart_data),
 	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
 		"uart1", &ap_uart_data),
-	OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
-		"kmi0", NULL),
-	OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
-		"kmi1", NULL),
 	{ /* sentinel */ },
 };